C-shaped Root Canal Research Articles

Frequency of C-Shaped Root Canals in Permanent Mandibular Second Molars in a Sample of Pakistani Population using Cone Beam Computed Tomography

Frequency of C-Shaped Root Canals in Permanent Mandibular Second Molars in a Sample of Pakistani Population using Cone Beam Computed Tomography

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation.

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Factors Influencing Non-Surgical Root Canal Treatment Outcomes in Mandibular Second Molars: A Retrospective Cone-Beam Computed Tomography Analysis.

Background/Objectives: This study aimed to investigate the influence of the root canal morphology and various treatment variables on the outcomes of root canal treatments (RCTs) in mandibular second molars, assessed through cone-beam computed tomography (CBCT) imaging. Methods: A total of 150 CBCT images were examined, comprising 100 cases of persistent endodontic infections and 50 of previously treated root canals with normal apices in the mandibular second molars. CBCT was utilized to evaluate the root canal configuration, the radiographic quality of coronal restorations and treated canal systems, and the presence of periapical lesions. Statistical analyses were performed to explore the correlations between these factors. Results: The presence of a C-shaped root canal configuration did not demonstrate a significant correlation with periapical lesions (p = 0.05). Factors influencing endodontic treatment outcomes included missing canals (p = 0.018), underfilling or overfilling (p = 0.045), and inadequate coronal restoration (p = 0.006). Missing a canal was identified as the variable most significantly associated with periapical lesions (OR = 3.103). Inhomogeneous root canal obturation was more commonly observed in C-shaped root canals (p < 0.001). Conclusions: Regardless of the root canal morphology of mandibular second molars, successful RCT depends on thorough disinfection to eliminate any untreated canals, precise three-dimensional filling of the canals at the correct working length, and a securely sealed coronal restoration to prevent leakage.

Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas’ apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

Endodontic retreatment of a mesotaurodontic mandibular first molar with C-shaped configuration in a patient with multiple taurodonts: A case report and review of literature

Abstract Taurodontism is a dental anomaly characterized by an apical displacement of the pulp chamber floor, resulting in a large pulp chamber with short roots. It can be associated with certain syndromes and abnormalities, although it is common to occur as an isolated characteristic. This anomaly can occur along with other root canal system anomalies such as C-type configuration. The aim of this report is to present the successful endodontic management of a C-shaped mesotaurodontic mandibular molar and review the literature available on this matter. A 23-year-old Persian female was referred by her dental surgeon to complete the root canal treatment of her right mandibular first molar (#46). Clinical examination showed a temporized cavity with no response to pulpoperiapical tests or visible pocket depth while an elongated root trunk with slight periodontal ligament widening, incomplete obturation of the root canal system, and periapical radiolucency was evident on the intraoral radiograph. Cone-beam computed tomography (CBCT) revealed a taurodontic and type III C-shaped root canal configuration. With a diagnosis of previous treatment and asymptomatic apical periodontitis, the patient was scheduled for root canal retreatment. The same anomaly was discovered in other molar teeth on the panoramic radiograph taken before the primary treatment of tooth #46. At a 2-month follow-up session, the tooth was found asymptomatic clinically and radiographically. The past publications about the management of nonsyndromic taurodontic molars were also reviewed. The review of 29 similar articles showed that preoperative CBCT, magnification with illumination, along with active irrigation are helpful items in managing such cases.

Root and canal morphology of mandibular second molar

Background: The mandibular second molar is the main chewing tooth and often suffer from pulp damage due to the misalignment of the mandibular third molar. In addition, it’s C-shaped root canal system is a challenge for endodontic treatment. This emphasizes the significance of tooth morphology and root canal system study which can contribute to anthropology, as well as Odonto-Stomatology. Purpose: The objective of this study was explore the morphology and root canal system of the mandibular second moalar in order to provide indicators dentistry applications. Materials and methods: Preclinical (in vitro) study was conducted on 48 mandibular socond molars which was collected in Thua Thien Hue province from December 2021 to June 2022. The teeth were measured externally and determine the shape of the roots. The canal system was examined with two methods including clearing technique and Cone Beam CT. Results: The average length of mandibular second molar was 20.37 ± 1.28 mm. 81.2% of teeth had one root, and 18.8% had two. The teeth with C-shaped roots accounted for 31.2%. The majority of distal roots possessed a simple type I (single canal) configuration. While the canal system of mesial roots was more complex which contained two canals, of which type I, II, III, IV were the most prevalent. C-shaped canal morphology was observed in 31.2% of the examined teeth. Conclusion: The root canall system of mandibular second molar was complex, the percentage of C-shaped canal was high (31.2%). There was similarlu results of two methods of clearing technique and Cone Beam CT in examining the root canal system of mandibular second molars. Key words: mandibular second molar, root canal system, C-shaped root, C-shaped root canal.

A New Methodology to Determine the Orifice for Root Canal Configurations in First Permanent Molar Root and Canal Morphologies Using Micro-Computed Tomography.

The distinction between where the pulp chamber ends and the root canal system begins is poorly defined within the existing literature. This paper aimed to describe a range of accurate methods to define the transition from pulp chamber to root canal in different first molar root morphologies using micro-focus computed tomography (micro-CT). The sample consisted of 86 mandibular and 101 maxillary first molars from the skeletal collections housed in the Department of Anatomy and Histology of the Sefako Makgatho Health Sciences University and the Pretoria Bone Collection. A stepwise approach using the cemento-enamel junction (CEJ) and dedicated landmarks was followed to create an automated cross-sectional slice. Transition from pulp chamber to root canal could be accurately determined on maxillary and mandibular teeth. The occurrence of two separate roots in mandibular molars was 97.7%, with the remaining 2.3% having an additional disto-lingual root, with no mandibular molars displaying fused roots. In the maxillary molars, 92.1% had three separate roots and 7.9% displayed root fusion. Within this group, one tooth displayed a C-shaped root canal configuration and one a mesotaurodont-type morphology. The suggested methodology to determine orifice location was found to be appropriate in all morphological types.

Cone beam computed tomography evaluation of c-shaped canal morphology in mandibular premolar teeth.

The aim of this study was to evaluate the prevalence and the morphology of c-shaped root canal(s) in mandibular premolars using cone beam computed tomography (CBCT) images. CBCT images of 1095 mandibular premolars were examined at coronal, middle, and apical levels of the root canals. The type, the level, and the position (buccal or lingual) of the c-shaped anatomy were recorded. Absolute counts and percentages of different groups and subgroups of C-shape morphologies were calculated. The Chi-square test was used to compare the prevalence of C-shaped morphology between mandibular first and second premolars. The Z-test for proportions in independent groups was used to analyze the differences in mandibular C-shaped premolar proportions between location (left and right side) and tooth (first or second premolars) (p=0.05). C-shaped root canal morphology was present in 44 teeth. The percentage of c-shaped morphologies was 6.9% and 1.6% in mandibular first and second premolars, respectively. Comparison of the first and the second premolars showed that C1 type (p=0.008) and C4b type (p=0.013) configurations are more common in the first premolars at the coronal level. In contrast, the C2 type configuration showed significantly higher prevalence in the second premolars (p=0.009). Additionally, the C4c type configuration was significantly frequent on the right premolars at the coronal level (p=0.038). C-shape canal morphology is a rare but complex anatomic feature in mandibular premolars. Therefore, clinicians should be aware of this complex root canal anatomy for the success of endodontic treatment in mandibular premolar teeth.

Evaluating the performance of generative adversarial network-synthesized periapical images in classifying C-shaped root canals

This study evaluated the performance of generative adversarial network (GAN)-synthesized periapical images for classifying C-shaped root canals, which are challenging to diagnose because of their complex morphology. GANs have emerged as a promising technique for generating realistic images, offering a potential solution for data augmentation in scenarios with limited training datasets. Periapical images were synthesized using the StyleGAN2-ADA framework, and their quality was evaluated based on the average Frechet inception distance (FID) and the visual Turing test. The average FID was found to be 35.353 (± 4.386) for synthesized C-shaped canal images and 25.471 (± 2.779) for non C-shaped canal images. The visual Turing test conducted by two radiologists on 100 randomly selected images revealed that distinguishing between real and synthetic images was difficult. These results indicate that GAN-synthesized images exhibit satisfactory visual quality. The classification performance of the neural network, when augmented with GAN data, showed improvements compared with using real data alone, and could be advantageous in addressing data conditions with class imbalance. GAN-generated images have proven to be an effective data augmentation method, addressing the limitations of limited training data and computational resources in diagnosing dental anomalies.

CBCT and Micro-CT analysis of the mandibular first premolars with C-shaped canal system in a Chinese population author

ObjectivesThe purpose of this study was to survey the prevalence of C-shaped root canal system in mandibular first premolar in Chinese population by reading Cone-beam computed tomography (CBCT) images and to analyze its anatomical characteristics by CBCT and Micro–computed tomography (Micro-CT).Methods and materialsThe prevalence and the morphologic features of C-shaped root canal system were evaluated by observing CBCT images of 760 patients (1520 mandibular first premolars). 66 mandibular first premolars with C-shaped root canal system were scanned by Micro-CT. The morphologic features including radicular groove, C-shaped root canal categories in the cross-sections and in the 3D models, accessory and connecting canals, apical foramina and accessory foramina, were analyzed using image software.ResultsC-shaped root canal system was identified in 16.9% of mandibular first premolars. The minimum mesial wall thickness most commonly occurred at the lingual site (69.7%). Regarding to the cross-sectional classification, the maximum was C2 (41.5%). In the 3D classification, the most common was S (34.8%). Accessory canals were observed in 36.4% of the samples and occurred mostly in the middle and apical regions. 42.4% samples had 1–3 variable connecting canals, and 40.9% samples had only one apical foramen.ConclusionsThe incidence of C-shaped root canal system in mandibular first premolars was 16.9% in the Chinese population. The anatomy was very complex and variable, mostly distributed in the middle and apical regions of the root canal. The mesial wall of C-shaped canal was extremely thin on the lingual side.

Shaping Ability of TRUShape and XP-endo Shaper in C-Shaped Canals Using 3D-Printed Replicas: A Micro-CT Study.

This study compared the shaping ability of TRUShape and XP-endo Shaper systems on C-shaped root canals replicas using microcomputed tomography (micro-CT). Thirty three-dimensional replicas based on a mandibular second molar classified as C1 type I C-shaped canal were randomly divided into two groups (n = 15): TRUShape (G.TRU) and XP-endo Shaper (G.XP) and instrumented with each system according to the manufacturer's instructions. Changes in volume and surface and the unprepared area of the root canal were measured by scanning on micro-CT before and after instrumentation. The unprepared areas were 39% in the G.TRU and 43% in the G.XP group with no significant difference between them (p > 0.05), but both the tested systems left a high percentage of unprepared root canal walls of C-shaped root canals. TRUShape and XP-endo Shaper showed a high rate of unprepared areas with similar results after C-shaped root canals replicas for root canal preparation.

Assessment of the root filling volume in C-shaped root canal on cone-beam CT and micro-CT in relation to nano-CT.

To assess the observed volume of filled C-shaped root canals from different CBCT and micro-CT having nano-CT as a reference. Twelve extracted mandibular molars with C-shaped root canals were endodontically treated using Reciproc Blue R25 (VDW GMBH, Munich, Germany) in a reciprocating system and filled with gutta-percha (Dentsply Maillefer) and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). CBCT scans were performed using 3 units-3D Accuitomo 170 (J. Morita, Kyoto, Japan), ProMax 3D Max (Planmeca, Helsinki, Finland), and NewTom VGi EVO (Cefla QR, Verona, Italy)-at two resolution modes: standard and high. Micro-CT and nano-CT scans were also obtained. The volume of all filled C-shaped root canals was obtained using CTAn software (Bruker, Kontich, Belgium), and the blooming artifact, in relation to nano-CT volume, was calculated. The data were evaluated by the Bland-Altman plots and ANOVA two-way for repeated measures (α = 0.05). All CBCT units and micro-CT showed significantly larger observed volume of root canal filling when compared to nano-CT. The blooming artifact of root canal filling in standard resolution was significantly larger than that in high resolution (p < 0.05) in all CBCT units. Endodontic filling material with AH Plus sealer causes blooming artifacts in CBCT units and micro-CT. Considering the anatomical complexity of C-shaped root canals and the challenges associated with endodontic treatment, CBCT is frequently recommended for follow-up evaluations. However, the presence of endodontic filling material can result in blooming artifacts that may potentially impact the accurate diagnosis of endodontic complications.

How to Manage FAN’S C Shape Canals along with S Shape Morphology in Indian Population: A Case Series and Narrative Review

The C-shaped root canals offer greater negotiation, debridement, and obturation difficulty as they present with intercommunications, lateral canals, and reduced dentin thickness. Objective: This case series elaborates on the recognition that these varying configurations is important to enhance adequate cleaning, shaping, and sealing of the root canal. Case Reports: On clinical examination, all the teeth showed caries were nonresponsive to sensibility tests and toother diagnostic tests, suggestive of pulp necrosis with apical periodontitis. Conventional root canal treatment with different techniques and obturation systems have been used. This case series presents the successful management of various C-shaped configurations classified by Fan et al. and emphasizes the different treatment approaches for effective therapy. The cleaning and shaping process should always follow the canal anatomy to maintain the canal shape at the same point the primary and secondary curvatures and thin interconnections are negotiated, prepared, and sealed. Conclusion: The morphological variation existence and their different types and management should be known for improved healing and enhanced success of root canal treatment.

Intentional replantation for the retreatment of mandibular second molar: a case report.

When the use of root canal retreatment and apical surgery experiences difficulty in treating endodontic diseases, intentional replantation is an optional clinical technique used to retain the tooth. A 28-year-old female complained of chewing discomfort at the mandibular second molar after undergoing root canal treatment 3 month ago. History record and radiographic examination revealed that a C-shaped root canal system was filled with gutta-percha in the mandibular second molar. A radiolucency area existed at the root furcal area with a thin canal wall in the distal and mesial roots. Intentional replantation was used to treat this tooth. The clinical and radiographic results showed that intentional replantation and nano-biomaterial application facilitated infection control, tooth retention, and periodontal tissue regeneration.

Evaluation of 2- and 3-dimensional anatomic parameters of C-shaped root canals with cone beam computed tomography, microcomputed tomography, and nanocomputed tomography

The objective of this study was to evaluate 2-dimensional (2D) and 3D morphometric parameters of C-shaped root canals on cone beam computed tomography (CBCT) and microcomputed tomography (microCT) images using nanocomputed tomography (nanoCT) as the reference standard. Sixty mandibular molars with C-shaped canals were individually scanned using nanoCT and microCT. Cone beam computed tomography acquisitions were then performed with 4 CBCT systems, using high and standard resolutions. The 2D parameters of roundness and major and minor diameters were obtained in the cross sections of the root canals at 1, 2, and 3 mm from the root apex. The 3D parameters of surface area, volume, and structure model index were measured considering the entire extension of the root canals. Absolute error (AE) in measurement was calculated against the nanoCT values. Data were statistically analyzed with the Shapiro-Wilk test and analysis of variance (α=0.05). No significant differences in AE were discovered for the 2D parameters among microCT and the CBCT scans. The AE values for the 3D parameters of volume and surface area were significantly smaller in microCT compared to all CBCT units (P < .05). Significantly lower AE values for surface area were observed in high resolution compared to standard resolution for all CBCT units (P < .05). Structure model index did not differ significantly among microCT and all CBCT protocols. Cone beam computed tomography images showed accuracy for evaluating 2D parameters and over- and underestimation for 3D parameters.

Bir Grup Türk Popülasyonunda Alt Çene Azı Dişlerinin Anatomisinin Konik Işınlı Bilgisayarlı Tomografi Çalışması

Objective: The mandibular molars represent one of the most common dental groups in which root canal treatments fail due to their complex anatomical structure and presence of the radix entomolaris or c-shaped root canals. For the long-term successful treatment of these teeth, all anatomical variations should be well known. The aim of this study was to evaluate the number of roots and root canal anatomy of mandibular molars in a group of Turkish patients by examining cone-beam computed tomography (CBCT) images.&#x0D; Material and Method: The CBCT images of 936 mandibular first and second molars of a total of 280 patients were evaluated, and the number of roots, root canal anatomy, and incidence of the radix entomolaris and c-shaped root canals in these teeth. The patients’ gender and age were also recorded, and their possible correlation with the dental data was investigated.&#x0D; Results: Among the total 936 mandibular molars, 98.8% had two roots, and the radix entomolaris was present in 1%. The number of root canals was 3 in 79.7% of the teeth, 4 in 17.7%, and 2 in 2.7%. Of the mandibular second molars, 6.6% showed C-shaped root canal formation. The rate of a single canal (Vertucci type I) was 4.7% for the mesial roots of the second molars, while the distal roots of the mandibular first molars showed type IV formation at a rate of 30.3%.&#x0D; Conclusion: Considering the contribution of our findings to clinical practice, the incidence of C-shaped canals in the mandibular second molars was 6.6%. Radix entomolaris was present in 1% of all the teeth. Four root canals were detected in 17.7% of the mandibular molars.

Prevalence and correlation of C-shaped root canals of mandibular premolars and molars in Eastern Chinese individuals

The aim of this study was to investigate the prevalence, correlation, and differences of C-shaped root canals (CSRCs) morphology in permanent mandibular premolars and molars in Eastern Chinese individuals using cone-beam computed tomography (CBCT). A total of 8000 mandibular first premolars (MFPs), mandibular second premolars (MSPs), mandibular first molars (MFMs), and mandibular second molars (MSMs) CBCT images from 1000 patients (692 females and 308 males) were collected. The prevalence, correlation, bilateral/unilateral presence, the morphology of CSRCs, level of canal bifurcation, gender differences, and location of radicular grooves (RGs) were evaluated. The prevalence of CSRCs in MFPs, MSPs, MFMs and MSMs were 10.25%, 0.25%, 0.55% and 47.05%, respectively. The prevalence of CSRCs in MFPs of males was higher than that in females, while the prevalence of CSRCs in MSMs of females was higher than that in males (P < 0.05). The bilateral symmetry presence of CSRCs in MSMs was significant but not in MFPs, MSPs, and MFMs. RGs were predominantly found on the mesiolingual (ML) surface of premolars and the lingual surface of molars. There was a high prevalence of CSRCs in MFPs and MSMs in the Eastern Chinese population, but there was no correlation. The prevalence of CSRCs in MFPs and MSMs differ significantly by gender (P < 0.05).

Anatomical Investigation of C-shaped Root Canal Systems of Mandibular Molars in a Middle Eastern Population: A CBCT Study

The aim of this study is to identify the prevalence of C-shaped root canal systems in mandibular first and second molars in a Lebanese population, and to determine the relationship between C-shaped root canal systems and different factors (age, gender, and tooth location) and to examine the root canal system's morphology along the root. The presence of C-shaped root canal systems in 648 mandibular molars from 257 patients was analyzed using cone-beam computed tomography (CBCT). The sample included 296 and 352 mandibular first and second molars, respectively. The frequency of C-shaped canals, their relationship to gender, age, and tooth location, and unilateral or bilateral occurrences were noted. A 3D Slicer 4.10.1 was then used to classify teeth with identified C-shaped anatomy according to Fan's configuration and to determine the distance between the orifice and the cementoenamel junction (CEJ). C-shaped root canal systems were detected in 1.01 and 9.09% of mandibular first and second molars, respectively. In mandibular second molars, the most prevalent configurations were as follows: C1 at the orifice level, C3 at orifice-2 mm, C2 and C3 in the middle third, and C3 at the apical level. There was no correlation with age, gender, and tooth position. The bilateral occurrence happened in 60% of cases. Orifices were at a mean distance of 3.32 mm below the CEJ. The deepest groove was mostly lingual. The prevalence of C-shaped root canal systems in the Lebanese population is 1.01 and 9.09% in the first and second mandibular molars, respectively. The CBCT slices showed that the configuration varies along the root and that the orifices are at various distances below the CEJ. Therefore, pre-operatory scans can be beneficial for better understanding and preparation of root canal treatment. In the Lebanese population, C-shaped mandibular molars are not a rare finding. Clinicians should consider the different configurations and the possible changes along the root.

A lightweight convolutional neural network model with receptive field block for C-shaped root canal detection in mandibular second molars

Rapid and accurate detection of a C-shaped root canal on mandibular second molars can assist dentists in diagnosis and treatment. Oral panoramic radiography is one of the most effective methods of determining the root canal of teeth. There are already some traditional methods based on deep learning to learn the characteristics of C-shaped root canal tooth images. However, previous studies have shown that the accuracy of detecting the C-shaped root canal still needs to be improved. And it is not suitable for implementing these network structures with limited hardware resources. In this paper, a new lightweight convolutional neural network is designed, which combined with receptive field block (RFB) for optimizing feature extraction. In order to optimize the hardware resource requirements of the model, a lightweight, multi-branch, convolutional neural network model was developed in this study. To improve the feature extraction ability of the model for C-shaped root canal tooth images, RFB has been merged with this model. RFB has achieved excellent results in target detection and classification. In the multiscale receptive field block, some small convolution kernels are used to replace the large convolution kernels, which allows the model to extract detailed features and reduce the computational complexity. Finally, the accuracy and area under receiver operating characteristics curve (AUC) values of C-shaped root canals on the image data of our mandibular second molars were 0.9838 and 0.996, respectively. The results show that the deep learning model proposed in this paper is more accurate and has lower computational complexity than many other similar studies. In addition, score-weighted class activation maps (Score-CAM) were generated to localize the internal structure that contributed to the predictions.

Gap volume and sealer penetration of C-shaped root canals obturated with cold hydraulic technique and calcium silicate sealer.

This study compared the gap volume and sealer penetration in C-shaped root canals prepared with adaptive core rotary files and obturated with cold hydraulic compaction using calcium-silicate sealer, warm vertical hybrid compaction, or lateral compaction using epoxy-resin sealer. Thirty-six extracted mandibular molars with pulpal floor configuration Types I and III were used. The teeth were prepared using XP-Shaper and XP-Finisher and obturated with: group 1: cold hydraulic compaction/calcium silicate, group 2: warm vertical hybrid compaction/epoxy resin, or group 3: lateral compaction/epoxy resin. The gap volume was evaluated using μ-CT. The sealer penetration depth and area were evaluated using confocal laser scanning microscopy. The gap volume in groups 1, 2, and 3 was 0.82%, 0.24%, 0.80%, respectively, which were not significantly different (p> 0.05). The gap volumes in the obturated C-shaped canals were not significantly different among the CHC/CSBS, WHC/ERS, or LC/ERS groups. CHC/CSBS was the most convenient technique.