C-shaped Canal System Research Articles

Micro-computed tomography analysis of calcium hydroxide delivery efficacy in C-shaped canal system of mandibular second molars

BackgroundCalcium hydroxide [Ca(OH)2] is widely accepted as a biocompatible interappointment intracanal medicament. This study aimed to analyze the efficacy of Ca(OH)2 placement into the C-shaped canal system of mandibular second molars using the syringe method with and without lentulo spiral utilizing micro-computed tomography (micro-CT).MethodsTwenty-four extracted mandibular second molars were instrumented and classified into C-shaped floors (n = 12) and non-C-shaped floors (n = 12). Both groups were placed with Ca(OH)2 using the syringe system, then all teeth were scanned and cleaned, and placed with Ca(OH)2 again but with the syringe system followed by lentulo spiral and rescanned. The specimens were scanned using micro-CT to analyze the volume, volume percentage, uncontacted surface area, and uncontacted surface area percentage of Ca(OH)2 with the two delivery methods in the entire canal and at the apical 4 mm of the canal. Mann-Whitney test and Wilcoxon signed-rank test were used to determine the statistical differences among the groups.ResultsSyringe administration used in conjunction with lentulo spiral presented lower uncontacted surface area, a lower percentage of uncontacted surface area, larger volume, and a higher percentage of volume than syringe without lentulo spiral (P < 0.05). There was no significant difference between the C-shaped floor group and the non-C-shaped floor group (P > 0.05) in the Ca(OH)2 uncontacted surface area, volume, and percentages at different regions of canals and among different delivery techniques groups.ConclusionsThe lentulo spiral and syringe technique combination can increase the volume and contacted surface area of Ca(OH)2 in the C-shaped canal system of mandibular second molars.

Prevalence of C-shaped canal morphology of first and second mandibular molars using Cone-Beam Computed Tomography

Introduction: Due to the importance of familiarity with root canal morphology in order to completely clear the canal and achieve treatment success, the aim of this study was to use Cone-Beam Computed Tomography (CBCT) images to evaluate the frequency and anatomy of C-shaped canals in the first and second mandibular molars. Materials and Methods: In this cross-sectional study, CBCT images of 209 patients (435 teeth) were evaluated to determine the presence of C-shaped canals and their anatomical morphologies along the root, based on Fan classification. Bilateral or unilateral occurrence of C-shaped canals and their relationship with gender, age and tooth location were examined and statistically analyzed using the chi-square test and SPSS 17 software. The significance level was P &lt; 0.05. Results: CBCT images from 209 patients, 103 patients (49.3%) were female and 106 (50.7%) were male. Out of 435 teeth (157 mandibular first molars and 278 mandibular second molars) evaluated, 33 specimens (7.5%) including the 2 first molars (1.27%) and 31 second molars (11.15%) had a C-shaped canal system which were from 25 patients (2 first molars in 2 patients and 31 second molars in 23 patients). The prevalence of bilateral C-shaped canals was among the 97 patients with bilateral second molars (6.18%). There was also no significant relationship between teeth position, gender and the prevalence of C-shaped canals. Conclusion: The configuration of C-shaped canals extensively changes along the length of the root and should be considered during preparation and obturation of root canal system.

CBCT and Micro-CT analysis of the mandibular first premolars with C-shaped canal system in a Chinese population author

ObjectivesThe purpose of this study was to survey the prevalence of C-shaped root canal system in mandibular first premolar in Chinese population by reading Cone-beam computed tomography (CBCT) images and to analyze its anatomical characteristics by CBCT and Micro–computed tomography (Micro-CT).Methods and materialsThe prevalence and the morphologic features of C-shaped root canal system were evaluated by observing CBCT images of 760 patients (1520 mandibular first premolars). 66 mandibular first premolars with C-shaped root canal system were scanned by Micro-CT. The morphologic features including radicular groove, C-shaped root canal categories in the cross-sections and in the 3D models, accessory and connecting canals, apical foramina and accessory foramina, were analyzed using image software.ResultsC-shaped root canal system was identified in 16.9% of mandibular first premolars. The minimum mesial wall thickness most commonly occurred at the lingual site (69.7%). Regarding to the cross-sectional classification, the maximum was C2 (41.5%). In the 3D classification, the most common was S (34.8%). Accessory canals were observed in 36.4% of the samples and occurred mostly in the middle and apical regions. 42.4% samples had 1–3 variable connecting canals, and 40.9% samples had only one apical foramen.ConclusionsThe incidence of C-shaped root canal system in mandibular first premolars was 16.9% in the Chinese population. The anatomy was very complex and variable, mostly distributed in the middle and apical regions of the root canal. The mesial wall of C-shaped canal was extremely thin on the lingual side.

C-shaped Canal System in Maxillary Molars Evaluated by Cone- Beam Computed Tomography in an Argentine subpopulation.

Of the 332 CBCTs initially evaluated, 120 met the selection criteria. Once the presence of a C-shaped canal system had been established, the teeth were classified following Martins et al. Data were expressed as absolute frequencies, percentages with of 95% confidence intervals, according to the score test. Comparisons were analyzed by Chi-square test and Fisher' exact test, with 5% significance level. It was found that 5 out of 120 first molars (4%) and 17 out of 152 second molars (11%) had a C-shaped canal system. Regarding the classification applied, of 5 C-shaped first molars, 2 corresponded to type E2 (40%), 2 corresponded to type C (40%), and 1 corresponded to type B1 (20%). Of 17 C-shaped second molars, 4 resembled a type A (24%), 7 resembled a type B1 (41%), 5 resembled a type B2 (29%), and 1 resembled a type C (6%). UC1 and UC2 configurations were the most common at all levels except apical level. The prevalence of C-shaped canal system pattern in maxillary first and second molars was estimated for the first time in an Argentine subpopulation, in vivo. Knowledge of these data should help clinicians during endodontic treatment.

Management Of Mandibular Second Molar With Single Root And Single Canal Using Re-Treatment Procedure

The root canal anatomy of mandibular second molar teeth is known to be highly variable. Whilst the most frequently seen configuration is two mesial canals and one distal canal, other variations such as four canals, two canals, and C-shaped canal system do also exist. This case report describes the re-treatment of unusual root canal configuration of a mandibular second molar, with one canal in a single conical root, using the contemporary advancements in endodontics. Following clinical and radiographic examinations of the case, a diagnosis of symptomatic apical periodontitis of tooth #37 was established, and retreatment followed by composite build-up were planned. Clinicians should be aware of the different anatomic variants each tooth may exhibit. Furthermore, clinicians need to possess the proper knowledge and skills that allow them to utilize the diagnostic and therapeutic tools available at their disposal in order to optimize the quality of care provided to their patients.

Variations of root and canal morphology of mandibular second molars in Chinese individuals: a cone-beam computed tomography study

BackgroundThe mandibular second molars demonstrate variations on root and canal morphology. The aim of this study was to investigate all the root canal morphology of mandibular second molars and analyze the morphological variations in patients by gender and age in a Chinese population use CBCT imaging.MethodsCone-beam computed tomographic images of 1200 bilateral mandibular second molars were obtained from 600 patients (300 females and 300 males) who required a preoperative assessment for implant surgery, surgical removal of impacted teeth, orthodontic treatment, surgery of maxillofacial tumour and cysts or LeFort I osteotomy. CBCT images were divided into 5 groups according to age: “15–24 years”, “25–34 years”, “35–44 years”, “45–54 years” and “≥ 55 years”; and 2 groups by gender: “females” and “males”. The following information were recorded: the number of roots and canals and their morphology, the frequency and configuration of C-shaped canals by gender, age and position (left and right). The chi-square test was used to analyse differences between groups. P value of < 0.05 was considered statistically significant.ResultsOf the 1200 teeth, 61% had two separate roots located mesiodistally, 35.6% had one C-shaped root. The 45.3% teeth had three canals in two-rooted mandibular second molars. The mesial root showed a Vertucci type II configuration in 28.9% cases followed by type IV(24.4%). While the distal root showed a significant higher prevalence of type I configuration in 95.6%. In the examined 1200 teeth, 430 teeth (35.8%) had C-shaped root canals. The prevalence of C-shaped root canal systems was significantly higher in females (42.5%) than in males (29.1%) (P = 0.000), and did not differ with age (P = 0.126). The 80.4% C-shaped canals were bilateral (P = 0.000) and did not differ with side (left and right) (P = 0.758).ConclusionsThe most commonly observed root morphology for the mandibular second molars was 2 separate roots with three canals.The prevalence of C-shaped root canal is 35.8% and is more higher in females than in males.

Comprehensive evaluation of root and root canal morphology of mandibular second molars in a Saudi subpopulation evaluated by cone-beam computed tomography

BackgroundThe study's goal was to use Cone Beam Computed Tomography (CBCT) to assess the root and root canal anatomy of mandibular second molars with C-shaped root canal configurations in residents of the Hail district. The impact of gender and side on the frequency of root canal morphology was considered.MethodsThe sample size for this study was 304 untreated mandibular second molars with completely developed roots on the right and left sides. Using CBCT on the teeth, the root form and canal morphology for each root are based on Vertucci's classification. The occurrence of canals in the shape of a C. The prevalence and resemblance of the left and right sides or men and females were investigated. The Chi-square test was performed to evaluate the findings.ResultsOf the 304 mandibular second molars studied, 286 teeth had two roots (94.1%), whilst 13 (4.3%) were C-shaped root canal systems. 77 molars (25.3%) had two canal orifices, 219 (72.0%) had three canal orifices, and six (2.0%) and one (0.3%) had four and five root canal orifices, respectively. Type IV was the most common for mesial root, accounting for 57.7% of the sample (n = 176). For distal root, the most common occurrence was type I, which occurred 282 times (96.60%). The most prevalent root canal morphology was the presence of two canals in the mesial root and one canal in the distal root of teeth with two distinct roots (variant 3). (69.4%). The overall prevalence of C-shaped root canal systems is (4.3%) (n = 13).ConclusionsThe patient's race is an undeniable factor that influences root canal anatomy. The root canal morphology of mandibular second molars revealed significant differences between Saudi subpopulations. The majority of mandibular second molars had two roots and three root canals. When treating these molars, the presence of a C-shaped root canal system must be taken into account.

Evaluation of C-shaped canals in maxillary molars in a Chinese population using CBCT

IntroductionThe aim of this study was to evaluate the prevalence and characteristics of C-shaped root canals in maxillary first (MFMs) and second (MSMs) molars in a Southwestern Chinese population using cone-beam computed tomographic (CBCT).MethodsCBCT images of MFMs (n = 1488) and MSMs (n = 1547) from 1508 subjects enrolled in Guiyang Hospital of Stomatology between July 2018 to February 2021 were evaluated for the incidence and types of C-shaped root canals. Differences by age, sex, left or right side, and bilateral symmetry were also evaluated.ResultsC-shaped root canals were present in 2.93% MFMs and MSMs (n = 3035) in the Southwestern Chinese population. A significant higher incidence was observed in the MSMs (5.24%) than in the MFMs (0.54%). Increased incidences were noted in teeth with fused root. Two major types and 5 subtypes of C-shaped canal system of maxillary molars were defined, and the most common type of C-shaped canals is fusion of mesial-buccal (MB) and distal-buccal (DB) canals (Type I subtype C). No significant gender and age differences were noted in the prevalence of C-shaped root canals in this population, and no significant difference was seen in its incidence in the left or right MFMs and MSMs. The bilateral occurrence was observed in 1.27% of the patients.ConclusionC-shaped root canals are more frequently present in MSMs than in MFMs in the Southwestern Chinese population, with Type I subtype C (MB-DB canal fusion) as the most common subtype and low incidence of bilateral symmetry.

The C-shaped Canal System in Mandibular Molars of a Saudi Arabian Population: Prevalence and Root Canal Configurations Using Cone-Beam Computed Tomography.

Objectives: This retrospective study aimed to assess the prevalence of the C-shaped canal system in mandibular first and second molars in a Saudi Arabian population using cone-beam computed tomography (CBCT).Materials and Methods: The sample included 300 CBCT images from adults aged 18 to 80 years (38.7 ± 17.9) (150 females and 150 males). All images were analyzed to detect the C-shaped root canal according to Fan’s criteria. We also categorized our findings according to the gender and direction of the longitudinal groove. Data were reported as frequencies and percentages. The Chi-squared test was used to analyze proportional differences, with the significance level set at ≤0.05.Results: The C-shaped canals were observed in 146 mandibular first molars (24.33%) and 182 second molars (30.33%). Male patients had a significantly higher prevalence of C-shaped canals in mandibular second molars than females (P=0.003). The longitudinal groove was most typically detected on the root's lingual surface (53.35%).Conclusion: The incidence of the C-shaped canal in a Saudi Arabian population was 27.33% in the mandibular molars. The longitudinal groove was mostly on the lingual surface. Males showed a higher prevalence of the C-shaped canal than females.

A Systematic Review: Prevalence of C Shaped Configuration in Upper-maxilaryand Lower-mandibular First Premolar

In most cases, the C-shaped pattern is found in mandibular second molars. Additionally, C-shaped canals can also occur in mandibular premolars, maxillary molars, and mandibular third molars. It poses challenges like debridement, obturation, and possibly the outcome of root canal treatment. The purpose of this study is to make a systematic review of studies related to the prevalence and morphology of C shaped canals in premolar teeth. Using pre-designed forms, data were extracted from online databases such as Medline and PubMed Central. We extracted citations and characteristics of studies, such as names of authors, date of publication, country, title, definition of C shaped canal configuration, and classification of C shaped canal configuration in upper and lower first premolars. Even though they are rare, mandibular premolars are also known to have C-shaped canal systems. Approximately 10-18% of mandibular first premolars have C-shaped canals, according to studies. Treatment is more challenging for patients with C-shaped canals. The frequency of C-shaped configurations in premolar teeth is likely to be affected by regional characteristics and gender of the population. Having these factors in mind before surgery allows dentists to better plan, coordinate, and perform complex morphologies.

C-Shaped canal system in mandibular premolars evaluated by cone-beam computed tomography in a population of the Autonomous City of Buenos Aires, Argentina

ObjectiveTo evaluate cone-beam computed tomography images in an Argentine population in order to determine the presence of mandibular premolars with C-shaped canal system and classify them. Methods697 images were observed, 170 of them fulfilling the selection criteria. Once established the presence of a C-shaped canal system, premolars were classified using Fan’s criteria. Data description was made by frequencies and percentages rates, with a 95% confidence interval according to the score method. Comparisons were assessed by means of the Chi-square test with a significance level equal to 5%. ResultsOf 269 first premolars, 27 teeth showed C-shaped canal system, i.e. 10%, and of 231 second premolars, 4 presented C-shaped canal system, i.e. 2%. Out of 17 patients presenting first premolars in both sides, 6 showed a bilateral C-shaped canal system pattern and 11 did not present this condition. When the condition was unilateral (n = 15), 7 patients showed C-shaped canal in the tooth 3.4 and 8 patients showed C-shaped canal in the tooth 4.4. The second premolars showed C-shaped canals unilaterally. Along the canal, configuration variations at the three-thirds have been observed for the first and second mandibular premolars. ConclusionThe C-shaped canal system pattern prevalence in mandibular first and second premolars was estimated for the first time in an Argentine population, in vivo. The present report contributes to the epidemiological understanding of the anatomical variable of the inner dental configuration and its extrapolation to the clinical practice.

Prevalence of C-shaped second mandibular molar canals in the population of central Serbia: A cone-beam computed tomography study

Background/Aim. C-shaped canals are a complex morphological variation of the tooth root canal system that, if present, could greatly affect the outcome of endodontic therapy. The prevalence of these canal configurations varies between the populations of different ethnic and geographical origins. Therefore, the goal of this study was to analyze the prevalence and morphology of mandibular second molar C-shaped canals in the population of Central Serbia. Methods. The study included a total of 1 99 mandibular second molars receiving a cone-beam computed tomography (CBCT) examination and determining the presence of C-shaped canal systems, their configuration, minimal wall thickness and its relative position on axial cross-sections at the coronal, middle, and apical level. Results. The prevalence of C-shaped mandibular second molars was 5.53%. C1 canal configuration was the most frequent at the coronal cross-section, while C2 configuration was the most frequent at middle and apical cross-sections. Minimal wall thickness decreased going apically, with the mean value of 1.01 mm at the coronal, 0.87 mm at the middle, and 0 .67 mm at the apical cross-sections. Minimal wall thickness was mostly directed lingually at all cross-sectional levels. Conclusion. C-shaped canals should be expected in mandibular second molars of the population of Central Serbia. CBCT was shown to be the most valuable technique to determine C-shaped canals and facilitate understanding of the C-shaped canal morphology; its implementation could improve the success of endodontic therapy, especially if the complex root canal configuration is present.

C-Shaped canal system - A Case report

ABSTRACT&#x0D; C-shaped canals are anatomic variants in root canal morphology. This c-shaped configuration should be diagnosed earliest as it influences the management of such cases more efficiently. They pose challenges in shaping, cleaning and obturating protocols. We require a file system which can contact and shape all possible surfaces of the c-shaped canal. Some of these file systems are XP-endo shaper files (FKG), SAF (ReDent NOVA). For cleaning, advocated systems are XP- endo finisher files (FKG), SAF, ultrasonic files like irrisafe, sonic files (endo-activator), endo-vac system. 3-D obturation should be done wih downpack and backfill technique (warm vertical or continuous wave of compaction)

Cone Beam Computed Tomography (Cbct) and Endodontic Microscopic Assessment of C-Shaped Canal Systems in Mandibular Second Molars

By knowing the anatomy of the tooth including root canal, dentists also have gathered physiologically anomalous requirements for effective root canal treatment. An exceptional morphology is present in the root canal system known as the C-shaped root network. A substantial volume of evidence already has come out on C-shaped root canal systems. The analysis provides an extensive description of root through root canals in the form of C. Characteristics of this exceptional morphology were studied mainly focused on macroscopic, microscopic and functional measurements including odontogenetic tooth shape analyses. To trying to clarify the clinical nature of C-shaped root canals, we sought to isolate them both. In addition to summarizing existing experiences, another of the objectives of this investigation was to find evidence that supports our interpretation of the C shaped root canal network. In fact, new advances in 3D mapping techniques help clarify the reliable etiology of the physiology of the Cshaped root canal network. Studies of extreme scenarios such as C-shaped root anatomy or morphology with rectangle and squared channels will also help us gain the wide range with root morphologies found in man’s teeth which eventually result in better care outcomes for patients and dentists and their satisfaction.

Endodontic management of c-shaped canal system in mandibular second molar: A case series

Endodontic management of c-shaped canal system in mandibular second molar: A case series

C-Shaped Canal System in Mandibular Second Molars Evaluated by Cone-Beam Computed Tomography in an Argentinean Subpopulation

Introduction:To evaluate cone-beam computed tomography (CBCT) images in order to determine the presence of mandibular second molars with C-shaped canal system and classify them.Methods:3035 CBCT images fulfilling the selection criteria were observed. Once established the presence of C-shaped canal system, they were classified according to the anatomic and radiographic classification of Fan et al. Data description was made by frequencies and percentages rates, with a 95% confidence interval (IC95) according to score method. Comparisons were assessed by means of the Chi-square test with a significance level equal to 5%.Results:Of the 225 selected patients, 44 exhibited C-shaped canals (20%; IC95: 15% to 25%). 70% (IC95: 56% to 82%) of patients showed a bilateral C-shaped canal system pattern. Regarding to the axial plane -anatomic classification-, there was a significant association between the root third and the configuration (Chi-square=76.89; p&lt;0.05): at the coronal third prevailed the C1 configuration (47%; IC95: 36% to 58%); at the middle third prevailed the C3d configuration (39%; IC95: 28% to 50%) and at the apical third, the C4 configuration (35%; IC95: 25% to 46%).

Prevalence of C-shaped canal system in mandibular first and second molars in a Saudi population assessed via cone beam computed tomography: a retrospective study.

The purpose of this study was to determine the prevalence of the C-shaped root canal configuration, location of the longitudinal groove, sex differences, and unilateral/bilateral presence in mandibular first and second molars in a Saudi population using cone beam computed tomography (CBCT). CBCT images for the mandibular first and second molars of 487 patients (a total of 529 first molars and 681s molars) were evaluated. The teeth were assessed for the presence of C-shaped root canals according to Fan criteria. Subdivisions were also made according to sex, direction of the longitudinal groove, and unilateral/bilateral presence. Only one C-shaped mandibular first molar was observed (0.19%), whereas 62 second molars (9.1%) exhibited C-shaped anatomy. Unilateral presence of the C-shaped root canal system was more common (53.85%). Female patients had a higher prevalence than males. Longitudinal grooves were most commonly found on the root lingual surface (58.1%). The prevalence of the C-shaped canal configuration in a Saudi Arabian population was 0.19% in the mandibular first molar and 9.1% in the mandibular second molar. Longitudinal groove prevalence was highest on the lingual surface. Women had a significantly higher prevalence of the C-shaped canal configuration than men. Patients with unilateral presence of the C-shaped canal configuration were more common than those with bilateral presence. Tooth type, patient sex, and ethnicity can help clinicians predict the prevalence of the C-shaped canal system in mandibular molars.

A cone-beam computed tomography study of C-shaped root canal systems in mandibular second premolars in a Taiwan Chinese subpopulation.

The purpose of this study is to investigate the prevalence and the morphologic characteristics of the radicular groove and root canal system in human mandibular second premolars with C-shaped root in a Taiwan Chinese subpopulation using cone-beam computed tomographic (CBCT) imaging. CBCT images of 580 mandibular second premolars were collected from 317 patients. All of the mandibular second premolars were examined in serial axial sections to identify the presence of any C-shaped root and C-shaped canal systems. The morphologic characteristics of mandibular second premolars with C-shaped roots were studied by performing measurements of serial axial sections. The prevalence rate of mandibular second premolars with a C-shaped root was 3.45% (20/580 teeth) and the rate of those with a C-shaped canal system was 2.24% (13/580 teeth). It was found that 69% of the radicular grooves were located on the lingual half of the root (9/13 teeth) in mandibular second premolars with a C-shaped canal system. In those teeth with a lingual radicular groove, the main canal was toward the buccal side. Frequently, the first C-shaped canal image was found at the mid-root level. The deepest part of the radicular groove was located at about 2.5 mm apical to the first C-shaped canal image. There was a 2-3% morphologic variation of the mandibular second premolar with a C-shaped root canal system among the Taiwan Chinese subpopulation investigated in this study. Detailed knowledge of the morphological characteristics of teeth may be valuable when choosing clinical treatments.

C-shaped root canals of mandibular second molars in a Korean population: a CBCT analysis.

ObjectivesThe purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population.Materials and MethodsA total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible.ResultsOf the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations.ConclusionsThere was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

Palatal Radicular Groove Morphology of the Maxillary Incisors: A Case Series Report

IntroductionTeeth with a palatal radicular groove are challenging to diagnose, treat, and save. We classified this condition using cone-beam computed tomographic (CBCT) cross-sectional configurations combined with radiographic and morphologic observations during an intentional replantation procedure to identify and analyze the characteristics of palatal radicular grooves comprehensively as a reference for diagnosis, treatment planning, and prognosis evaluation of this condition. MethodsEight cases with palatal radicular grooves present in permanent maxillary incisors were investigated by radiography and CBCT imaging before intentional replantation. ResultsThe palatal radicular grooves were classified into 3 types based on groove depth and cross-sectional shape on CBCT images: type I, with a shallow groove depth, corresponding to a normal, simple, and single root canal; type II, with a medium groove depth, corresponding to a C-shaped canal system; and type III, with a deep groove depth, almost bisecting the root of the tooth, simultaneously present with 2 independent root canals and an apex with normal shape, corresponding to a labial groove connecting with a palatal groove. The extracted teeth and their radiographic images showed corresponding characteristics. ConclusionsThe CBCT cross-sectional images allowed the best visualization of the depth of the grooves and highlighted the difficulties entailed in treating such teeth. Intentional replantation is an effective therapeutic decision for this type of deformity and can provide better prognosis estimation, especially in teeth with type II and III grooves.