Butadiene Monoxide Research Articles

Copolymerization reactions of butadiene monoxide with 3‐glycidyloxypropyltrimethoxysilane and styrene oxide and their glycol derivatives

ABSTRACTCopolymerization reactions of butadiene oxide (BuO) with 3‐glycidyloxypropyltrimethoxysilane (GPTS) and styrene oxide (SO) were carried out under solvent free condition by potassium hydroxide catalyst. Copolymers obtained from ring opening polymerization of BuO with GPTS and SO were characterized by 1H‐NMR, 13C‐NMR, FTIR, DSC, and gel permeation chromatography. High‐resolution NMR analysis was particularly effective in the study of copolymers microstructures and revealed the structural and sequence details. Block copolymers were formed because of different polymerization velocity of monomers. Average molecular weights of copolymers were between 1500–13 000 Da and polydispersity index of copolymers is rather low (Mw/Mn = 1.17–1.36). Copolymers were hydrolyzed by 1.0 M tetrapropylammonium hydroxide to form copolyglycol having adhesive and fiber characteristics. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47074.

Reaction kinetic studies for comparison of mutagenic potency between butadiene monoxide and glycidamide

DNA adducts can be formed from covalent binding of electrophilic reactive compounds to the nucleophilic N- and O-atoms of the biomolecule. The O-sites on DNA, with nucleophilic strength (n) of ca. 2, is recognized as a critical site for mutagenicity. Characterization of the reactivity of electrophilic compounds at the O-sites can be used to predict their mutagenic potency in relative terms. In the present study, reaction kinetic experiments were performed for butadiene monoxide (BM) in accordance with the Swain-Scott relation using model nucleophiles representing N- and O-sites on DNA, and earlier for glycidamide (GA) using a similar approach. The epoxide from the kinetic experiments was trapped by cob(I)alamin, resulting in formation of an alkylcobalamin which was analyzed by liquid chromatography tandem mass spectrometry. The Swain-Scott relationship was used to determine selectivity constant (s) of BM and GA as 0.86 and 1.0, respectively. The rate constant for the reaction at n of 2 was extrapolated to 0.023 and 0.038 M−1 h−1 for BM and GA, respectively, implying a higher mutagenic potency per dose unit of GA compared to BM. The reaction kinetic parameters associated with mutagenic potency were also estimated by a density functional theory approach, which were in accordance to the experimental determined values. These types of reaction kinetic measures could be useful in development of a chemical reactivity based prediction tool that could aid in reduction of animal experiments in cancer risk assessment procedures for relative mutagenicity.

Radical polymerization behavior and thermal properties of vinyl ethylene carbonate derivatives bearing aromatic moieties

Abstract Vinyl ethylene carbonate (VEC) derivatives bearing aromatic moieties were prepared by the catalyzed addition of carbon dioxide (CO 2 ) to butadiene monoxide (BMO) derivatives. The radical polymerization of the VEC monomers was carried out in bulk and solution by using a radical initiator, and those produced polymers were analyzed in detail by IR, NMR, and MALDI-TOF mass methods. These results indicated that radical polymerization of VEC derivatives proceeded through the selective vinyl fashion without depending on the substituents and solvents. Furthermore, the chain transfer reaction occurred easily in NMP and the produced polymer had the NMP moiety in the polymer terminal. The radical polymerization of the bifunctional monomer also proceeded through the vinyl fashion together with the chain transfer reaction in NMP and produced the gelation polymer. Electron-withdrawing of the substituents influenced the thermal property of the produced polymer and bifunctional polymer also obtained the high thermal stability than monofunctional polymer. In this report, the polymerization behavior and property of VEC derivatives bearing aromatic groups was summarized systematically.

ChemInform Abstract: Palladium‐Catalyzed Asymmetric Allylic Amination of Racemic Butadiene Monoxide with Isatin Derivatives.

AbstractA palladium‐catalyzed asymmetric allylic amination of racemic butadiene monoxide with isatins and their derivatives as nucleophiles under mild reaction conditions is successfully realized using a chiral P/terminal‐olefin ligand.

Palladium-catalyzed asymmetric allylic amination of racemic butadiene monoxide with isatin derivatives.

Isatins and their derivatives are important functional moities and building blocks in pharmaceutical and synthetic chemistry. Numerous enantioselective transformations at the C-3 carbonyl group have been well developed. However, the asymmetric substitution reaction with isatins and their derivatives as nucleophiles based on the free N-H groups has been less studied due to the relatively weaker nucleophilicity resulting from the two electron-withdrawing carbonyl groups. In this paper, a palladium-catalyzed asymmetric allylic amination of racemic butadiene monoxide with isatin derivatives using a chiral phosphoramidite olefin hybrid ligand has been successfully developed under mild conditions. A variety of chiral amino alcohols were afforded in 55-87% yields with 10/1->20/1 regioselectivity ratios and 80-97% ees.

Preservation of epoxy groups on surfaces in the covalent attachment of butadiene monoxide on Si(111)-(7×7): the effect of a vinyl substituent.

Adsorption of butadiene monoxide on Si(111)-(7×7) has been scrutinized by high-resolution electron energy loss spectroscopy (HREELS), scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. The experimental results indicate that surface reaction occurs through a [2+2]-like cycloaddition, which is further supported by the DFT studies.

Rational Design of Oxirane Monomers for Efficient Crossover Reactions in Concurrent Cationic Vinyl-Addition and Ring-Opening Copolymerization with Vinyl Ethers

Rational structural design of oxirane monomers is demonstrated here to be highly conducive to crossover reactions in the concurrent cationic vinyl-addition and ring-opening copolymerization of alkyl vinyl ethers and oxiranes. The key to the efficient crossover reactions was the smooth transformation of the once-formed oxirane-derived oxonium ion into the ring-opened carbocation, which then reacted with a vinyl monomer. For example, oxiranes that form resonance-stabilized, allyl-type carbocations (i.e., isoprene monoxide and butadiene monoxide) were polymerized through efficient crossover reactions in copolymerization with isopropyl vinyl ether, yielding copolymers composed of relatively short monomer sequences. In particular, the copolymerization of isoprene monoxide and isopropyl vinyl ether generated random or alternating-rich copolymers. The reaction using an oxirane that forms tertiary carbocations (isobutylene oxide) also proceeded via crossover reactions; however, the crossover frequency was lower, which resulted in a multiblock-like copolymer. In contrast to the three oxiranes that yielded copolymers, oxiranes that possibly result in secondary carbocations from their ring-opening (3,3-dimethyl-1,2-butylene oxide and 1,2-butylene oxide) hardly induced crossover reactions. In addition to the ease of carbocation generation via ring-opening, the nucleophilicity of the monomer and the reactivity of the oxirane-derived carbocations were shown to substantially affect the copolymerization behavior. These factors are discussed on the basis of the monomer reactivity ratios that were determined for the copolymerization systems using vinyl ethers with different reactivities, i.e., isopropyl vinyl ether or ethyl vinyl ether, toward oxiranes.

Enantioselective Synthesis and Profiling of Two Novel Diazabicyclooctanone β-Lactamase Inhibitors.

The enantioselective synthesis of two novel cyclopropane-fused diazabicyclooctanones is reported here. Starting from butadiene monoxide, the key enone intermediate 7 was prepared in six steps. Subsequent stereoselective introduction of the cyclopropane group and further transformation led to compounds 1a and 1b as their corresponding sodium salt. The great disparity regarding their hydrolytic stability was rationalized by the steric interaction between the cyclopropyl methylene and urea carbonyl. These two novel β-lactamase inhibitors were active against class A, C, and D enzymes.

Palladium‐Catalyzed 1,4‐Addition of Carboxylic Acids to Butadiene Monoxide

AbstractPalladium complexes catalyze the 1,4‐addition of acetic acid to butadiene monoxide to give 4‐hydroxybut‐2‐en‐1‐yl acetate. The highest 1,4‐/1,2‐addition selectivity of 18.9 was achieved. The reaction seems to proceed via a Wacker‐like mechanism.

Rhodium-Catalyzed Asymmetric Formal Cycloadditions of Racemic Butadiene Monoxide with Imines

A simple chiral sulfur-alkene hybrid ligand has proven to be highly effective for rhodium-catalyzed formal cycloaddition reactions of racemic butadiene monoxide and imines to furnish spirooxindole oxazolidines or 1,3-oxazolidines with high yields and stereoselectivities. A possible dynamic kinetic resolution as well as a kinetic resolution is considered to be involved in this catalytic process.

Oxazolidine Synthesis by Complementary Stereospecific and Stereoconvergent Methods

Complementary stereospecific and stereoconvergent reactions for enantioselective synthesis of 1,3-oxazolidines are reported. In the presence of a rhodium catalyst, reaction of enantioenriched butadiene monoxide with aryl imines is stereospecific (99% ee). Alternatively, the reaction of racemic butadiene monoxide, in the presence of a chiral palladium or nickel catalyst, provides an enantioselective synthesis of 1,3-oxazolidines (up to 94% ee). Synthesis of either the cis- or trans-1,3-oxazolidines is also accomplished under catalyst control.

Alternative Reagents for Chemical Noise Reduction in Liquid Chromatography–Mass Spectrometry Using Selective Ion–Molecule Reactions

Reduction of ionic chemical background noise based on selective gas-phase reactions with chosen neutral reagents has been proven to be a very promising approach in liquid chromatography-mass spectrometry (LC-MS). In this study further investigations on alternative reagents including the disulfides (dimethyl disulfide, diethyl disulfide, methyl propyl disulfide), dimethyl trisulfide, ethylene oxide, and butadiene monoxide, for example, have been carried out. Tandem mass spectrometric studies of ion/molecule reactions indicate that-besides dimethyl disulfide-ethylene oxide and butadiene monoxide also exhibit very efficient reactions with background ions. Furthermore, it is confirmed that the reactions are very selective according to the test with some analyte ions. In contrast to its rapid reactions with background ions, ethylene oxide does not react, or reacts much less, with these analytes. Therefore, it can be used as an alternative reagent for noise reduction. Although reactions of the other tested neutral reagents with background ions are evaluated, they are generally not suitable as reagents for this purpose because of lack of reactivity or dramatic ion losses during reactions.

Studies on photodissociation dynamics of butadiene monoxide at 193nm

Butadiene monoxide (BMO) undergoes the S(0)-->S(1) transition, involving the excitation of both pi and n electrons to pi(*) orbital, at 193 nm. After relaxing to the ground electronic state via internal conversion, BMO molecules undergo intramolecular rearrangement and subsequently dissociate to form unexpected OH radicals, which were detected state selectively by laser-induced fluorescence technique, and the energy state distribution was measured. OH is produced vibrationally cold, OH(nu(")=0,J(")), with the rotational population characterized by a rotational temperature of 456+/-70 K. The major portion (approximately 60%) of the available energy is partitioned into internal degrees of the photofragments, namely, vibration and rotation. A considerable portion (25%-35%) also goes to the relative translation of the products. The Lambda doublet and spin-orbit ratios of OH were measured to be nearly unity, implying statistical distribution of these states and, hence, no preference for any of the Lambda doublet (Lambda+ and Lambda-) and spin-orbit (Pi(3/2) and Pi(1/2)) states. Formation time of the nascent OH radical was measured to be <100 ns. Different products, such as crotonaldehyde and methyl vinyl ketone, were detected by gas chromatography as stable products of photodissociation. A reaction mechanism for the formation of all these photoproducts, transient and stable, is proposed. The multiple pathways by which these products can be formed have been theoretically optimized, and energies have been calculated. Absorption cross section of BMO at 193 nm was measured, and quantum yield of OH generation channel was also determined.

Palladium‐Catalyzed DYKAT of Butadiene Monoepoxide: Enantioselective Total Synthesis of (+)‐DMDP, (−)‐Bulgecinine, and (+)‐Broussonetine G

Palladium catalyzed asymmetric allylic alkylation reaction of an amine with two equivalents of butadiene monoxide allows for the expedient synthesis of trans- and cis-2,5-dihydropyrroles. The versatility of these chiral synthons towards the synthesis of a wide variety of iminosugar natural products was demonstrated with the short and high yielding asymmetric syntheses of (+)-DMDP, and (-)-bulgecinine. In addition, the first total synthesis of (+)-broussonetine G, a potent glycosidase inhibitor, is described along with the assignment of its relative and absolute stereochemical configuration.

Hemoglobin adducts and micronuclei in rodents after treatment with isoprene monoxide or butadiene monoxide

1,3-Butadiene and isoprene (2-methyl-1,3-butadiene) are chemically related substances that are carcinogenic to rodents. The overall aim of this work is to elucidate the role of the genotoxic action of diepoxide metabolites in the carcinogenesis of the dialkenes. In vivo doses of the diepoxide metabolites were measured through reaction products with hemoglobin (Hb adducts) in studies of induced micronuclei (MN) in rodents. In the reaction with N-terminal valine in Hb, diepoxybutane and isoprenediepoxide form ring-closed adducts, pyrrolidines [ N, N-(2,3-dihydroxy-1,4-butadiyl)valine and N, N-(2,3-dihydroxy-2-methyl-1,4-butadiyl)valine, respectively]. The method applied for Hb-adduct measurement is based on tryptic degradation of the protein and liquid chromatography electrospray ionisation tandem mass spectrometry (LC–ESI-MS/MS) analysis. Mice were given single i.p. injections of the monoepoxides of butadiene and isoprene, 1,2-epoxy-3-butene or 1,2-epoxy-2-methyl-3-butene, respectively. Rats were treated in the same way with 1,2-epoxy-3-butene. In mice pyrrolidine adduct levels increased with increasing administered doses of the monoepoxides. The in vivo dose of diepoxybutane was on average twice as high (0.29 ± 0.059 mMh) as the in vivo dose of isoprenediepoxide (0.15 ± 0.053 mMh) per administered dose (mmol/kg body weight) of the monoepoxides. In mice the genotoxic effects of the two monoepoxides, measured as the increase in the frequencies of micronuclei (MN), were approximately linearly correlated to the in vivo doses of the diepoxides (except at the highest dose of diepoxybutane). In rats the pyrrolidine-adduct levels from diepoxybutane were below the limit of quantification at all administered doses of 1,2-epoxy-3-butene and no significant increase was observed in the frequency of MN. Measurement of the ring-closed adducts to N-termini in Hb by the applied method permits analysis of in vivo doses of diepoxybutane and isoprenediepoxide, which may be further used for the elucidation of the mechanisms of carcinogenesis of butadiene and isoprene.

Palladium-catalyzed DYKAT of vinyl epoxides: enantioselective total synthesis and assignment of the configuration of (+)-Broussonetine G.

A potential general approach to potent N-heterocyclic glycosidase inhibitors is illustrated by the first total synthesis of (+)-broussonetine G (1). The key transformation of the synthesis relies on two successive palladium-catalyzed asymmetric allylic alkylations of butadiene monoxide with a nitrogen nucleophile to construct the pyrrolidine core.

Advances in the mass spectrometry of hemoglobin adducts: global analysis of the covalent binding of butadiene monoxide

A common method to assess exposure to 1,3-butadiene through both occupational and environmental routes involves the detection of hemoglobin adducts formed by the primary reactive metabolite butadiene monoxide (EB). This assay is a modification of the Edman degradation procedure, which was developed to determine adducts formed specifically at the amine group of the N-terminal valine of hemoglobin. The goals of the current research are to determine the global modification of α- and β-globin chains by EB and to localize the primary reactive residues to specific regions of the globin polypeptides. The degree of modification was monitored by electrospray mass spectrometry, which was used to measure the formation of EB-hemoglobin adducts (up to ten adducts per globin). Structural analysis of these modifications was performed by peptide mapping of globin peptides after trypsin digestion using liquid chromatography-mass spectrometry. These experiments provided information as to the relative reactivity of α- and β-globin towards EB, as well as to the localization of adducts to specific peptide sequences. The results reveal variable reactivities of α- and β-globin towards EB and also show the formation of multiple adducts at several α- and β-globin sites. In addition, it is established that the N-terminal valine residues are not the first to be modified by EB.

Reactive metabolites of 1,3-butadiene: DNA and hemoglobin adduct formation and potential roles in carcinogenicity.

1,3-Butadiene (BD), a petrochemical widely used in the manufacture of synthetic rubber and plastics, has recently been added to the list of chemicals Known To Be Human Carcinogens based upon epidemiological and mechanistic data indicating a causal relationship between occupational exposure to BD and excess mortality from lymphatic and/or hematopoietic cancers (U.S. Department of Health and Human Services, 2000). Long-term BD inhalation studies in mice and rats have also been associated with genotoxicity and carcinogenicity, with mice being much more sensitive to BD-induced carcinogenicity than rats (Melnick et al, 1990; Owen et al, 1987). Because BD toxicities are believed to be mediated by reactions of BD metabolites with nucleophilic sites on macromolecules, studies in our laboratory have focused on the characterization of potential metabolic pathways of BD bioactivation, in terms of the enzymes involved, the metabolites formed, and the kinetics of the reactions. Bioactivation reactions of several primary and secondary BD metabolites were also examined. In addition, the reactions of butadiene monoxide (BMO), a primary metabolite of BD, with macromolecules were characterized.KeywordsHuman Liver MicrosomeEpoxide HydrolaseReactive MetaboliteGlobin ChainFast Atom Bombardment Mass SpectrumThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

A comprehensive structural analysis of hemoglobin adducts formed after in vitro exposure of erythrocytes to butadiene monoxide.

A widely used method for assessing occupational and environmental exposure to 1,3-butadiene involves the detection of hemoglobin adducts formed by the reactive metabolite butadiene monoxide (BMO). This assay employs the N-alkyl Edman method, which was developed to determine adducts formed at the amine group of the N-terminal valine of hemoglobin. Disadvantages of this procedure include its limitation to detecting only one adduct per globin chain, despite the presence of numerous other, and potentially more reactive, nucleophilic amino acids in hemoglobin. The method is also not suitable for determining whether the reaction of BMO occurs at the N-terminal valine of alpha- or beta-globin. The primary goals of the current research are to determine the degree of modification of alpha- and beta-globin chains by BMO and to localize the reactive residues to specific regions of the globin polypeptides. The reaction products after in vitro incubation of C57Bl/6 mouse erythrocytes with BMO were isolated by acid extraction of heme and microprecipitation of globin, followed by the determination of the number and location of adducts by mass spectrometry. The modification degree was monitored by electrospray mass spectrometry, which was used to measure the time- and concentration-dependent formation of BMO-hemoglobin adducts (< or =10 adducts per globin). The results indicate that BMO reacts faster and to a higher degree with alpha-globin than with beta-globin. Structural analysis was performed by peptide mapping of globin peptides after trypsin digestion using liquid chromatography/mass spectrometry. These experiments allowed the localization of BMO-hemoglobin adducts to specific regions within alpha- and beta-globin, and also provided information about their relative reactivity. Interestingly, the initial site of adduct formation on alpha-globin is located near the N-terminal peptide, whereas the initial site on beta-globin is located at the C-terminal region. Collectively, the results establish differences in the reactivities of alpha- and beta-globin toward BMO, demonstrate the formation of multiple adducts at several alpha- and beta-globin sites, and show that the N-terminal valine residues are not the first to be modified by BMO.

Characterization of the reactivity, regioselectivity, and stereoselectivity of the reactions of butadiene monoxide with valinamide and the N-terminal valine of mouse and rat hemoglobin.

Occupational exposure to 1,3-butadiene (BD) has been monitored by measuring the level of hemoglobin N-terminal valine adduct formation with the primary reactive metabolite, butadiene monoxide (BMO). However, mechanistic details concerning the relative reactivity, regioselectivity, and stereospecificity of BMO with the N-terminal valine of hemoglobin are lacking. In the studies presented here, L-valinamide was used as a model for the N-terminal valine of hemoglobin to compare the nucleophilic reactivity, regioselectivity, and stereoselectivity of the reaction both in aqueous solution and within a protein microenvironment. Four products produced by the reaction of L-valinamide with racemic BMO (two pairs of diastereomers produced by reactions at C-1 and C-2 of the epoxide moiety) were synthesized, purified, and characterized by (1)H NMR and GC/MS. These four reaction products were used as analytical standards for kinetic studies of the reaction of valinamide with BMO at physiological pH (7.4) and temperature (37 degrees C). The results show that the adducts formed by reaction at C-2 were formed at a ratio of approximately 2:1 compared to the adducts formed by reaction at C-1. The stereoisomers of each respective regioisomer were produced with similar rates of formation. The reaction of BMO with the N-terminal valine of hemoglobin was also studied in vitro using intact erythrocytes from Sprague-Dawley rats and B6C3F1 mice. After cleavage of the N-modified valine by the N-alkyl Edman degradation procedure using pentafluorophenylisothiocyanate (PFPITC), a novel procedure was developed that allowed GC/MS detection and quantitation of the four expected products by silylation of the PFPTH-valine-BMO derivatives. The hemoglobin results contrast with the valinamide results in that the reaction of BMO with the N-terminal valine residue in both rat and mouse hemoglobin produced mostly C-1 adducts. The rates obtained with rat hemoglobin were much slower than the rates obtained with mouse hemoglobin or with valinamide. These results, and the finding that the reaction with rat hemoglobin produced a higher ratio of C1:C2 adducts in comparison with the reaction with mouse hemoglobin, indicate the importance of measuring all four adducts when comparing the relative rates of adduct formation both with model compounds and among different species.