Bulky Amino Acid Residues Research Articles

Characterization of Phosphorylation-Dependent Antibody Binding to Cancer-Mutated Linkers of C2H2 Zinc Finger Proteins by Intact Transition Epitope Mapping-Thermodynamic Weak-Force Order Analysis.

With Intact Transition Epitope Mapping-Thermodynamic Weak-force Order (ITEM-TWO) analysis in combination with molecular modeling, the phosphorylation-dependent molecular recognition motif of the anti-HpTGEKP antibody has been investigated with binary and ternary component mixtures consisting of antibody and (phospho-) peptides. Amino acid sequences have been selected to match either the antibody's recognition motif or the cancer-related zinc finger protein mutations and phosphorylations of the respective amino acid residues. Upon electrospraying of all the components of the mixtures, that is, hexapeptides, antibody, and intact immune complexes, the produced ions were subjected to mass spectrometric mass filtering. The antibody ions as well as the immune complex ions traversed into the mass spectrometer's collision chamber, whereas paths of unbound peptide ions were blocked prior to entering the collision cell. After dissociation of the multiply charged immune complexes in the gas phase, the complex-released peptide ions were recorded after having traversed the second mass filter. Complex-released peptides were unambiguously identified by their masses using mass analysis with isotope resolution. From the results of our studies with seven (phospho-) peptides with distinct amino acid sequences, which resembled either the antibody's binding motif or mutations, we conclude the following: (i) A negatively charged phospho group, located near the peptide's N-terminus is mandatory for antibody binding when placed on the peptide surface at a precise distance to the C-terminally located positively charged ε-amino group of a lysinyl residue. (ii) A bulky amino acid residue, such as the tyrosinyl residue at the N-terminal position of the (phospho-) threoninyl residue, abolishes antibody binding. (iii) Two closely spaced phospho groups negatively interfere with the surface polarity pattern and abolish antibody binding as well. (iv) Non-phosphorylated peptides are not binding partners of the anti-HpTGEKP antibody.

Nascent polypeptide within the exit tunnel stabilizes the ribosome to counteract risky translation.

Continuous translation elongation, irrespective of amino acid sequences, is a prerequisite for living organisms to produce their proteomes. However, nascent polypeptide products bear an inherent risk of elongation abortion. For example, negatively charged sequences with occasional intermittent prolines, termed intrinsic ribosome destabilization (IRD) sequences, weaken the translating ribosomal complex, causing certain nascent chain sequences to prematurely terminate translation. Here, we show that most potential IRD sequences in the middle of open reading frames remain cryptic and do not interrupt translation, due to two features of the nascent polypeptide. Firstly, the nascent polypeptide itself spans the exit tunnel, and secondly, its bulky amino acid residues occupy the tunnel entrance region, thereby serving as a bridge and protecting the large and small ribosomal subunits from dissociation. Thus, nascent polypeptide products have an inbuilt ability to ensure elongation continuity.

Modification of PapA5 acyltransferase substrate selectivity for optimization of short-chain alcohol-derived multimethyl-branched ester production in Escherichia coli.

Plant waxes are interesting substitutes of fossil-derived compounds; however, their limited sources and narrow structural diversity prompted the development of microbial platforms to produce esters with novel chemical structures and properties. One successful strategy was the heterologous expression of the mycocerosic polyketide synthase-based biosynthetic pathway (MAS-PKS, PapA5 and FadD28 enzymes) from Mycobacterium tuberculosis in Escherichia coli. This recombinant strain has the ability to produce a broad spectrum of multimethyl-branched long-chain esters (MBE) with novel chemical structures and high oxidation stability. However, one limitation of this microbial platform was the low yields obtained for MBE derived of short-chain alcohols. In an attempt to improve the titers of the short-chain alcohol-derived MBE, we focused on the PapA5 acyltransferase-enzyme that catalyzes the ester formation reaction. Specific amino acid residues located in the two-substrate recognition channels of this enzyme were identified, rationally mutated, and the corresponding mutants characterized both in vivo and in vitro. The phenylalanine located at 331 position in PapA5 (F331) was found to be a key residue that when substituted by other bulky and aromatic or bulky and polar amino acid residues (F331W, F331Y or F331H), gave rise to PapA5 mutants with improved bioconversion efficiency; showing in average, 2.5 higher yields of short-chain alcohol-derived MBE compared with the wild-type enzyme. Furthermore, two alternative pathways for synthetizing ethanol were engineered into the MBE producer microorganism, allowing de novo production of ethanol-derived MBE at levels comparable with those obtained by the external supply of this alcohol. KEY POINTS: • Mutation in channel 2 changes PapA5 acyltransferase bioconversion efficiency. • Improved production of short-chain alcohol derived multimethyl-branched esters. • Establishing ethanologenic pathways for de novo production of ethanol derived MBE. • Characterization of a novel phenylethanol-derived MBE.

Molecular Deceleration Regulates Toxicant Release to Prevent Cell Damage in Pseudomonas putida S16 (DSM 28022).

The underlying molecular mechanisms of flavin-dependent amine oxidases remain relatively poorly understood, even though many of these enzymes have been reported. The nicotine oxidoreductase NicA2 is a crucial enzyme for the first step of nicotine degradation in Pseudomonas putida S16 (DSM 28022). Here, we present the crystal structure of a ternary complex comprising NicA2 residues 21 to 482, flavin adenine dinucleotide (FAD), and nicotine at 2.25 Å resolution. Unlike other, related structures, NicA2 does not have an associated diacyl glycerophospholipid, wraps its substrate more tightly, and has an intriguing exit passage in which nine bulky amino acid residues occlude the release of its toxic product, pseudooxynicotine (PN). The replacement of these bulky residues by amino acids with small side chains effectively increases the catalytic turnover rate of NicA2. Our results indicate that the passage in wild-type NicA2 effectively controls the rate of PN release and thus prevents its rapid intracellular accumulation. It gives ample time for PN to be converted to less-harmful substances by downstream enzymes such as pseudooxynicotine amine oxidase (Pnao) before its accumulation causes cell damage or even death. The temporal metabolic regulation mode revealed in this study may shed light on the production of cytotoxic compounds.IMPORTANCE Flavin-dependent amine oxidases have received extensive attention because of their importance in drug metabolism, Parkinson's disease, and neurotransmitter catabolism. However, the underlying molecular mechanisms remain relatively poorly understood. Here, combining the crystal structure of NicA2 (an enzyme in the first step of the bacterial nicotine degradation pathway in Pseudomonas putida S16 (DSM 28022)), biochemical analysis, and mutant construction, we found an intriguing exit passage in which bulky amino acid residues occlude the release of the toxic product of NicA2, in contrast to other, related structures. The selective product exportation register for NicA2 has proven to be beneficial to cell growth. Those seeking to produce cytotoxic compounds could greatly benefit from the use of such an export register mechanism.

Extraction, identification and structure-activity relationship of antioxidant peptides from sesame (Sesamum indicum L.) protein hydrolysate

To elucidate the sequence, origin and structure-activity relationship of antioxidant peptides from sesame protein, sesame protein was hydrolysed by a dual-enzyme system comprised alcalase and trypsin, then this hydrolysate was fractionated by ultrafiltration and preparative HPLC. Subsequently, peptides in the high antioxidant activity fraction were identified by nano liquid chromatography-electrospray ionization-tandem mass spectrometry (Nano-LC-ESI-MS/MS), finally the structure-activity relationship of antioxidant peptide with the strongest activity in the sesame peptides was illustrated by comparative molecular field analysis (CoMFA). The results showed that seven novel antioxidant peptides were discovered, their sequences were as follows, RDRHQKIG, TDRHQKLR, MNDRVNQGE, RENIDKPSRA, SYPTECRMR, GGVPRSGEQEQQ and AGEQGFEYVTFR. The SYPTECRMR was the hydrolysate of 2S albumin, the others derived from 11S globulin. The SYPTECRMR whose IC50 Values of DPPH and ABTS were 0.105 mg/mL and 0.004 mg/mL respectively exhibited the highest antioxidant activity among the seven sesame peptides. The active site of SYPTECRMR tended to locate on Cys6 and Met8. A positive correlation between Cys6, Met8, the bulky C-terminal amino acid residue (Arg9), the negative charged group around sulphur-containing amino acids and the antioxidant activity of SYPTECRMR was observed from the CoMFA model. The results presented herein suggested that sesame protein hydrolysates have potential applications in functional food due to their high antioxidant activity, the CoMFA model could provide insight into the structure-activity relationship of antioxidant peptide, which is useful to screen, identify and design the novel antioxidant peptide.

Kinetic Resolution of sec‐Thiols by Enantioselective Oxidation with Rationally Engineered 5‐(Hydroxymethyl)furfural Oxidase

AbstractVarious flavoprotein oxidases were recently shown to oxidize primary thiols. Herein, this reactivity is extended to sec‐thiols by using structure‐guided engineering of 5‐(hydroxymethyl)furfural oxidase (HMFO). The variants obtained were employed for the oxidative kinetic resolution of racemic sec‐thiols, thus yielding the corresponding thioketones and nonreacted R‐configured thiols with excellent enantioselectivities (E≥200). The engineering strategy applied went beyond the classic approach of replacing bulky amino acid residues with smaller ones, as the active site was additionally enlarged by a newly introduced Thr residue. This residue established a hydrogen‐bonding interaction with the substrates, as verified in the crystal structure of the variant. These strategies unlocked HMFO variants for the enantioselective oxidation of a range of sec‐thiols.

Kinetic Resolution of sec-Thiols by Enantioselective Oxidation with Rationally Engineered 5-(Hydroxymethyl)furfural Oxidase.

Various flavoprotein oxidases were recently shown to oxidize primary thiols. Herein, this reactivity is extended to sec-thiols by using structure-guided engineering of 5-(hydroxymethyl)furfural oxidase (HMFO). The variants obtained were employed for the oxidative kinetic resolution of racemic sec-thiols, thus yielding the corresponding thioketones and nonreacted R-configured thiols with excellent enantioselectivities (E≥200). The engineering strategy applied went beyond the classic approach of replacing bulky amino acid residues with smaller ones, as the active site was additionally enlarged by a newly introduced Thr residue. This residue established a hydrogen-bonding interaction with the substrates, as verified in the crystal structure of the variant. These strategies unlocked HMFO variants for the enantioselective oxidation of a range of sec-thiols.

Production of Medium Chain Fatty Acids by Yarrowia lipolytica: Combining Molecular Design and TALEN to Engineer the Fatty Acid Synthase.

Yarrowia lipolytica is a promising organism for the production of lipids of biotechnological interest and particularly for biofuel. In this study, we engineered the key enzyme involved in lipid biosynthesis, the giant multifunctional fatty acid synthase (FAS), to shorten chain length of the synthesized fatty acids. Taking as starting point that the ketoacyl synthase (KS) domain of Yarrowia lipolytica FAS is directly involved in chain length specificity, we used molecular modeling to investigate molecular recognition of palmitic acid (C16 fatty acid) by the KS. This enabled to point out the key role of an isoleucine residue, I1220, from the fatty acid binding site, which could be targeted by mutagenesis. To address this challenge, TALEN (transcription activator-like effector nucleases)-based genome editing technology was applied for the first time to Yarrowia lipolytica and proved to be very efficient for inducing targeted genome modifications. Among the generated FAS mutants, those having a bulky aromatic amino acid residue in place of the native isoleucine at position 1220 led to a significant increase of myristic acid (C14) production compared to parental wild-type KS. Particularly, the best performing mutant, I1220W, accumulates C14 at a level of 11.6% total fatty acids. Overall, this work illustrates how a combination of molecular modeling and genome-editing technology can offer novel opportunities to rationally engineer complex systems for synthetic biology.

Different specificities of two aldehyde dehydrogenases from Saccharomyces cerevisiae var. boulardii.

Aldehyde dehydrogenases play crucial roles in the detoxification of exogenous and endogenous aldehydes by catalysing their oxidation to carboxylic acid counterparts. The present study reports characterization of two such isoenzymes from the yeast Saccharomyces cerevisiae var. boulardii (NCYC 3264), one mitochondrial (Ald4p) and one cytosolic (Ald6p). Both Ald4p and Ald6p were oligomeric in solution and demonstrated positive kinetic cooperativity towards aldehyde substrates. Wild-type Ald6p showed activity only with aliphatic aldehydes. Ald4p, on the contrary, showed activity with benzaldehyde along with a limited range of aliphatic aldehydes. Inspection of modelled structure of Ald6p revealed that a bulky amino acid residue (Met177, compared with the equivalent residue Leu196 in Ald4p) might cause steric hindrance of cyclic substrates. Therefore, we hypothesized that specificities of the two isoenzymes towards aldehyde substrates were partly driven by steric hindrance in the active site. A variant of wild-type Ald6p with the Met177 residue replaced by a valine was also characterized to address to the hypothesis. It showed an increased specificity range and a gain of activity towards cyclohexanecarboxaldehyde. It also demonstrated an increased thermal stability when compared with both the wild-types. These data suggest that steric bulk in the active site of yeast aldehyde dehydrogenases is partially responsible for controlling specificity.

Structural and thermodynamic characterisation of L94F mutant of horse cytochrome c

Mammalian mitochondrial cytochromes c (cyts c) has a conserved Leu94 which is replaced by valine/isoleucine in some lower eukaryotes and prokaryotes. It is expected that nature substituted Leu94 with Val/Ile, for they have similar van der Waals volume and hydrophobicity with a difference in side chain branching only. Reports also suggested the presence of phenylalanine at position 94, which leads to questions: (i) How bulky aromatic amino acid residue fitted at position 94 in cyt c family proteins? (ii) What is the effect of L94F mutation on protein stability and folding? Here, we selected horse cyt-c as a model to answer the second question. We generated L94F mutant of horse cytochrome c and subsequently characterised using far-UV, near-UV and Soret circular dichroism, absorbance, intrinsic and extrinsic ANS (8-anilino-1-napthalenesulfonic acid) fluorescence and dynamic light scattering measurements. We observed that this mutation affects the native state and arrests the protein folding at the molten globule state. Thermal stability of L94F mutant is also measured by spectroscopic techniques and differential scanning calorimetry. The midpoint of thermal denaturation of L94F mutant is 17°C less than wild type. Molecular dynamics simulation study also supports our in vitro observation that this mutant has stable backbone conformation.

Enhanced stability of Cu(2+)-ATCUN complexes under physiologically relevant conditions by insertion of structurally bulky and hydrophobic amino acid residues into the ATCUN motif.

Copper complexes formed by an amino terminal Cu(2+)- and Ni(2+)-binding (ATCUN) motif have attracted attention as metallodrug candidates that cleave DNA or RNA and inactivate enzymes. Although the stability of the Cu(2+)-ATCUN complex under physiologically relevant conditions is a key factor for medical applications, it has remained unclear. Here we prepared a series of ATCUN peptides by inserting various amino acid residues into positions 1 and 2, and investigated the stability of the Cu(2+)-ATCUN complexes in aqueous solution, blood plasma, and living animals. Systematic pH titration showed that the low basicity of the N-terminal amine of the peptide stabilized the Cu(2+)-ATCUN complex in aqueous solution. Interestingly, the stability of (64)Cu-labeled ATCUN complexes in blood plasma was significantly enhanced by the structural bulkiness and hydrophobicity of the amino acid residues at positions 1 and 2. To validate the in vivo stability, six ATCUN motifs (YYH, VVH, NNH, TTH, GGH, and DDH) were conjugated to a tumor-targeting peptide, octreotide (Oct). The stability of the (64)Cu-ATCUN-Oct complexes in blood plasma showed a similar trend to that of the (64)Cu-ATCUN complexes. The (64)Cu-YYH-Oct complex exhibited the highest stability in blood plasma. According to the positron emission tomography and competitive blocking studies of a tumor-bearing mouse model, (64)Cu-YYH-Oct specifically accumulated in tumors, suggesting that the complex was sufficiently stable to reach its target in vivo. The results show that the structural bulkiness and hydrophobicity of the residues at positions 1 and 2 are key parameters for designing metallodrugs on the basis of the Cu(2+)-ATCUN complex.

Electrochemical and Infrared Spectroscopic Studies Provide Insight into Reactions of the NiFe Regulatory Hydrogenase from Ralstonia eutropha with O2 and CO.

The regulatory hydrogenase (RH) from Ralstonia eutropha acts as the H2-sensing unit of a two-component system that regulates biosynthesis of the energy conserving hydrogenases of the organism according to the availability of H2. The H2 oxidation activity, which was so far determined in vitro with artificial electron acceptors, has been considered to be insensitive to O2 and CO. It is assumed that bulky isoleucine and phenylalanine amino acid residues close to the NiFe active site "gate" gas access, preventing molecules larger than H2 interacting with the active site. We have carried out sensitive electrochemical measurements to demonstrate that O2 is in fact an inhibitor of H2 oxidation by the RH, and that both H(+) reduction and H2 oxidation are inhibited by CO. Furthermore, we have demonstrated that the inhibitory effect of O2 arises due to interaction of O2 with the active site. Using protein film infrared electrochemistry (PFIRE) under H2 oxidation conditions, in conjunction with solution infrared measurements, we have identified previously unreported oxidized inactive and catalytically active reduced states of the RH active site. These findings suggest that the RH has a rich active site chemistry similar to that of other NiFe hydrogenases.

Steric hindrance between S4 and S5 of the KCNQ1/KCNE1 channel hampers pore opening.

In voltage-gated K(+) channels, membrane depolarization induces an upward movement of the voltage-sensing domains (VSD) that triggers pore opening. KCNQ1 is a voltage-gated K(+) channel and its gating behaviour is substantially modulated by auxiliary subunit KCNE proteins. KCNE1, for example, markedly shifts the voltage dependence of KCNQ1 towards the positive direction and slows down the activation kinetics. Here we identify two phenylalanine residues on KCNQ1, Phe232 on S4 (VSD) and Phe279 on S5 (pore domain) to be responsible for the gating modulation by KCNE1. Phe232 collides with Phe279 during the course of the VSD movement and hinders KCNQ1 channel from opening in the presence of KCNE1. This steric hindrance caused by the bulky amino-acid residues destabilizes the open state and thus shifts the voltage dependence of KCNQ1/KCNE1 channel.

Ligand–receptor binding increments in enantioselective liquid chromatography

A set of N-derivatized amino acids were separated into enantiomers on a tert-butylcarbamoylated quinine-based chiral stationary phase (CSP). Quantitative structure–property relationship (QSPR) studies were then employed to investigate the retention behavior and factors responsible for enantioselectivity. Computations were performed using a general linear model and a Free-Wilson matrix with indicator variables as structural descriptors. The approach allowed calculations of retention increments for first and second eluted enantiomers as well as group contributions to enantioselectivity. The results demonstrated that the additivity principle of group contributions was obeyed for the majority of solutes in the data set. Only a few basic amino acids (Arg, His) needed to be removed as they did not fit to such a linear model leading to outliers. The model was carefully validated and then utilized to investigate retention and enantioselectivity contributions of different protection groups and individual amino acid residues. It turned out that primarily protection groups were driving retention and enantioselectivity. In contrast, the contribution of amino acid residues to enantioselectivity was only significant for secondary amino acids, α-methylated amino acids, aspartic acid and a few sterically bulky aliphatic amino acid residues (Tle, Ile, allo-Ile). Amongst them only the latter group contributed positively to enantioselectivity while the other residues mentioned reduced enantioselectivity significantly. This type of QSPR model may be valuable to analyze retention/selectivity data of closely related congeneric compound series, is illustrative and straightforward to implement. It is thus valuable for interpretation of retention mechanisms, while its utility for prediction of retention and enantioselectivity data is limited to compounds made up of groups included in the solute set used for deriving the increments.

Spectroscopic Investigation of the Roles of F282 and W172 in the Ligand Pathway of Aa3 Cytochrome C Oxidase from Rhodobacter Sphaeroides

Knowledge of how the protein environment can tune ligand pathways and metal-based prosthetic group(s) in heme-copper oxidase is fundamental for understanding the catalytic functions of these enzymes. To establish possible relationships between the structural diversity of these enzymes and their ligand binding dynamics, we used photolabile O2 and NO complexes to compare the kinetics of molecular oxygen (O2) and nitric oxide (NO) reacting with reduced heme-copper oxidases from different species. For example, time-resolved optical absorption (TROA) measurements in our laboratory have shown that O2 and NO bind to reduced Thermos thermophilus ba3 with a superfast second-order rate constant of 1×109 M−1s−1, which is 10-times faster than observed for the aa3 oxidases.In this study, the structural and mechanistic features that moderate ligand access to the active site of aa3 cytochrome c oxidase (CcO) in Rhodobacter sphaeroidesaa3 were investigated by TROA spectroscopy. Two bulky amino acid residues (tryptophan 172 and phenylalanine 282) have been suggested to generate a putative constriction point along the ligand pathway to the active site in R. sphaeroides CcO. To investigate the possible roles of these amino acid residues in modulating ligand access, the tryptophan 172 and phenylalanine 282 were mutated to the less bulky tyrosine, and threonine residues present in Thermus thermophilusba3 oxidase. The reactions of O2 and NO with the fully reduced W172Y/F282T double mutant of the R. sphaeroides were investigated by TROA spectroscopy in combination with photolabile O2 and NO carriers. The results suggest that the amino acid residues under investigation may play an important structural role in ligand access to the active site in R. sphaeroidesaa3.

Structure‐guided mutagenesis for the improvement of substrate specificity of Bacillus megaterium glucose 1‐dehydrogenase IV

Bacillus megaterium IAM 1030 (Bacillus sp. JCM 20016) possesses four d-glucose 1-dehydrogenase isozymes (BmGlcDH-I, -II, -III and -IV) that belong to the short-chain dehydrogenase/reductase superfamily. The BmGlcDHs are currently used for a clinical assay to examine blood glucose levels. Of these four isozymes, BmGlcDH-IV has relatively high thermostability and catalytic activity, but the disadvantage of its broad substrate specificity remains to be overcome. Here, we describe the crystal structures of BmGlcDH-IV in ligand-free, NADH-bound and β-D-glucose-bound forms to a resolution of 2.0 Å. No major conformational differences were found among these structures. The structure of BmGlcDH-IV in complex with β-D-glucose revealed that the carboxyl group at the C-terminus, derived from a neighboring subunit, is inserted into the active-site pocket and directly interacts with β-D-glucose. A site-directed mutagenic study showed that destabilization of the BmGlcDH-IV C-terminal region by substitution with more bulky and hydrophobic amino acid residues greatly affects the activity of the enzyme, as well as its thermostability and substrate specificity. Of the six mutants created, the G259A variant exhibited the narrowest substrate specificity, whilst retaining comparable catalytic activity and thermostability to the wild-type enzyme.

Steric hindrance by 2 amino acid residues determines the substrate specificity of isomaltase from Saccharomyces cerevisiae

The structures of the E277A isomaltase mutant from Saccharomyces cerevisiae in complex with isomaltose or maltose were determined at resolutions of 1.80 and 1.40Å, respectively. The root mean square deviations between the corresponding main-chain atoms of free isomaltase and the E277Α-isomaltose complex structures and those of free isomaltase and the E277A-maltose complex structures were found to be 0.131Å and 0.083Å, respectively. Thus, the amino acid substitution and ligand binding do not affect the overall structure of isomaltase. In the E277A-isomaltose structure, the bound isomaltose was readily identified by electron densities in the active site pocket; however, the reducing end of maltose was not observed in the E277A-maltose structure. The superposition of maltose onto the E277A-maltose structure revealed that the reducing end of maltose cannot bind to the subsite +1 due to the steric hindrance from Val216 and Gln279. The amino acid sequence comparisons with α-glucosidases showed that a bulky hydrophobic amino acid residue is conserved at the position of Val216 in α-1,6-glucosidic linkage hydrolyzing enzymes. Similarly, a bulky amino acid residue is conserved at the position of Gln279 in α-1,6-glucosidic linkage-only hydrolyzing α-glucosidases. Ala, Gly, or Asn residues were located at the position of α-1,4-glucosidic linkage hydrolyzing α-glucosidases. Two isomaltase mutant enzymes - V216T and Q279A - hydrolyzed maltose. Thus, the amino acid residues at these positions may be largely responsible for determining the substrate specificity of α-glucosidases.

Identification of putative residues involved in the accessibility of the substrate-binding site of lipoxygenase by site-directed mutagenesis studies

Lipoxygenases (LOXs) are a class of widespread dioxygenases catalyzing the hydroperoxidation of polyunsaturated fatty acids (PUFA). Recently, we isolated a cDNA encoding a LOX, named olive LOX1, from olive fruit of which the deduced amino acid sequence shows more than 50% identity with plant LOXs. In the present study, a model of olive LOX1 based on the crystal structure of soybean LOX-1 as template has been generated and two bulky amino acid residues highly conserved in LOXs (Phe277) and in plant LOXs (Tyr280), located at the putative entrance of catalytic site were identified. These residues may perturb accessibility of the substrate-binding site and therefore were substituted by less space-filling residues. Kinetic studies using linoleic and linolenic acids as substrates were carried out on wild type and mutants. The results show that the removal of steric bulk at the entrance of the catalytic site induces an increase of substrate affinity and of catalytic efficiency, and demonstrate that penetration of substrates into active site of olive LOX1 requires the movement of the side chains of the Phe277 and Tyr280 residues. This study suggests the involvement of these residues in the accessibility of the substrate-binding site in the lipoxygenase family.

COOH-terminal isoleucine of lysosome-associated membrane protein-1 is optimal for its efficient targeting to dense secondary lysosomes

Lysosome-associated membrane protein-1 (LAMP-1) consists of a highly glycosylated luminal domain, a single-transmembrane domain and a short cytoplasmic tail that possesses a lysosome-targeting signal (GYQTI(382)) at the COOH terminus. It is hypothesized that the COOH-terminal isoleucine, I(382), could be substituted with any other bulky hydrophobic amino acid residue for LAMP-1 to exclusively localize in lysosomes. In order to test this hypothesis, we compared subcellular distribution of four substitution mutants with phenylalanine, leucine, methionine and valine at the COOH-terminus (termed I382F, I382L, I382M and I382V, respectively) with that of wild-type (WT)-LAMP-1. Double-labelled immunofluorescence analyses showed that these substitution mutants were localized as significantly to late endocytic organelles as WT-LAMP-1. However, the quantitative subcellular fractionation study revealed different distribution of WT-LAMP-1 and these four COOH-terminal mutants in late endosomes and dense secondary lysosomes. WT-LAMP-1 was accumulated three to six times more in the dense lysosomal fraction than the four mutants. The level of WT-LAMP-1 in late endosomal fraction was comparable to those of I382F, I382M and I382V. Conversely, I382L in the late endosomal fraction was approximately three times more abundant than WT-LAMP-1. These findings define the presence of isoleucine residue at the COOH-terminus of LAMP-1 as critical in governing its efficient delivery to secondary lysosomes and its ratio of lysosomes to late endosomes.

Increased Enantioselectivity by Engineering Bottleneck Mutants in an Esterase from Pseudomonas fluorescens

Four hydrophobic and bulky amino acid residues (F126, F144, F159, and I225) were identified to form a bottleneck guarding the entrance to the active site of an esterase from Pseudomonas fluorescens (PFE I). Hence, a range of nonpolar amino acids were introduced into PFE I to broaden the substrate range and to increase enantioselectivity while preserving the hydrophobicity of the tunnel. First, single variants were created and then the most enantioselective ones were combined to find cooperative effects. This resulted in several mutants, which showed substantially enhanced enantioselectivity; for instance, in the kinetic resolution of 1-phenyl-1-propyl acetate, with which the wild type only showed E=1.2, two mutants gave E>46. For 1-phenyl-1-ethyl acetate enantioselectivity increased from approximately 50 to >100 for all mutants studied. Furthermore, higher conversions could be found at shorter reaction times; this indicates that the mutations not only enhanced selectivity, but that also the entrance into the active site was indeed facilitated by these mutations. The experimental results could be explained by computer modeling.