Use Of Building Information Modeling Research Articles

OS DESAFIOS DA IMPLANTAÇÃO DA METODOLOGIA BIM EM ESCRITÓRIOS DE ARQUITETURA NA CIDADE DE VITÓRIA DA CONQUISTA – BA

Building Information Modeling (BIM) can be defined as a methodology that uses 3D models and their detailed data on all elements involved in a civil construction project. As society is a constantly evolving organism, the Construction Industry has faced the need to adapt in order to deliver better productivity results, thereby meeting increasingly meticulous demands more effectively. Scientific research has shown that the use of BIM can reduce project completion times in infrastructure by up to half. Given this, why is the number of architecture and urban planning firms in Vitória da Conquista – BA, that use this methodology still so minimal? This article, through bibliographic research as well as opinion surveys with architects and urban planners from the city of Vitória da Conquista, aims to demonstrate the challenges of implementing Building Information Modeling (BIM) methodology in offices in Vitória da Conquista – BA. Thus, the points discussed in this work will provide a reflection on this question, the conclusion of which will depend on the awareness and experience of each participating architect, as well as the robustness of the understandings used to support the content in the following sections.

The Potential of Building Information Modeling in Agricultural Operations

Building Information Modeling (BIM) has been widely adopted in the construction industry, providing a virtual representation of physical objects and systems. In the context of agriculture, BIM can be applied to monitor and manage the physical and operational characteristics of farms and agricultural facilities using BIM digital twins. A BIM digital twin is a virtual representation of a physical object or system that is based on data from BIM models and other sources. The integration of sensors is essential in creating a BIM digital twin as they provide real-time data that can be used to update and maintain the virtual representation. The use of BIM digital twins in agriculture has the potential to improve the management of agricultural facilities, reduce environmental pollution, and promote the sustainability of agricultural land. Sensors can be used in agriculture to monitor various parameters such as soil moisture, temperature, and nutrient levels. BIM digital twins can also be used to monitor and manage sources of pollution, such as the use of pesticides and fertilizers, and to develop strategies to minimize their impact on the environment. BIM digital twins provide a comprehensive view of the condition of agricultural land and the factors that influence it, such as weather patterns, industry activities, and human activities. 4D BIM is an extension of traditional 3D BIM that adds a time dimension to the model. In the context of agriculture, 4D BIM can be used to visualize and simulate various processes related to time and soil management, such as planting and harvesting cycles, and to evaluate the impact of different planting strategies on crop yields. 4D BIM can also be used to model the impact of weather patterns on crop growth and to develop contingency plans for weather- related events. The use of BIM in agriculture has the potential to transform the industry by providing a new level of insight and control over agricultural operations. BIM models can be used to simulate and visualize different scenarios for agricultural facilities, such as the use of water, fertilizer, and energy, leading to improved efficiency and reduced waste. By using BIM to optimize operations, agricultural companies can increase their productivity and profitability. The integration of BIM digital twins and 4D BIM in agriculture has the potential to revolutionize the industry by providing new tools for monitoring and managing agricultural operations. The use of BIM digital twins and 4D BIM can help reduce environmental pollution, promote sustainability, and improve the efficiency and productivity of agricultural operations. Testing is needed to fully understand the potential benefits of BIM and BIM digital twins in agriculture and to develop best practices for their implementation.

Adaptability of BIM technology to mitigate the cost overruns in design and build projects

Purpose Cost overruns are an inevitable issue in design and build (D&B) projects. In D&B projects, causes for cost overruns can be managed by adopting appropriate building information modelling (BIM) functions. Because there is a research gap in synergy between the use of BIM for mitigating cost overruns in D&B projects, this study aims to evaluate the adaptability of BIM to manage cost overrun issues in them. Design/methodology/approach Research objectives were attained through a quantitative research approach adopting the Delphi technique, which consists of three rounds of a questionnaire survey. Through statistical tools, the collected data were analysed. Findings This research revealed the ten most crucial causes for cost overruns in D&B projects, where continuous changes in designs and drawings are the top causes. Change and revision management and interoperability are the most crucial BIM functions to address the aforementioned cause. Subsequently, 16 enablers, 26 barriers and 19 strategies to implement BIM to manage the identified significant causes of cost overruns were overviewed. Originality/value This study addresses the literature gap pertaining to the cost overrun in D&B projects and the application of BIM by studying the causes for cost overrun, suggesting BIM functions to mitigate the above cause. Moreover, this study assessed the probable barriers and enablers for BIM adoption in construction projects from D&B perspective.

A Simplified Framework to Integrate Databases with Building Information Modeling for Building Energy Assessment in Multi-Climate Zones

BIM models are seldom used for the energy certification of buildings. This paper discusses the advantages of linking two important fields: building information modeling (BIM) and building environmental assessment methods (BEAM), presented as a rating system and a proposal for the Chilean context. The state of the art in both fields around the world is discussed, with an in-depth examination of current BIM software and related applications, followed by a discussion about previous research on integrating them. A lack of interoperability and data losses between BIM and BEM were found. A new tool is presented that addresses these challenges to ensure accurate rating system data, and this new framework is based on database exchange and takes crucial information from BIM to BEAM platforms. The development of the method includes BIM programming (API), database links, and spreadsheets for a Chilean building energy certification through a new tool, also applicable to multiclimactic zones. This new semi-automatic tool allows architects to model their design in a BIM platform and use this information as input for the energy certification process. The potential and risks of this method are discussed. Several improvements and enhancements of the energy certification process were found when incorporating this new framework in comparison to current methodologies.

A BIM Package with a NEC4 Contract Option to Mitigate Construction Disputes in the Kingdom of Saudi Arabia

The construction sector of the Kingdom of Saudi Arabia (KSA), valued at USD 152 billion and employing 2.54 million people by 2023, is crucial to its economy. However, it faces challenges such as delays, disputes, and cost overruns. This study aims to address these issues by implementing Building Information Modeling (BIM) in the KSA, based on an extensive literature review highlighting the role and significance of BIM in mitigating construction claims. BIM improves collaboration, communication, and data integration among stakeholders. Hence, this study proposes a comprehensive BIM Package framework comprising Revit Architecture, Microsoft Project, and Cost-X to reduce claims effectively. Validated through a KSA claims case study with a USD 1,870,000 claims value and 360-day delay, the BIM Package significantly reduced the claims value to USD 188,000 and saved 275 days. Interview sessions were conducted to validate the effectiveness of the BIM Package; 95% favored the use of BIM, 86% supported NEC4 contract adoption alongside BIM, 100% acknowledged BIM’s potential in reducing design errors, 95% were confident in the case study’s accuracy, and 82% were satisfied with data accuracy. This study confirms that BIM is an effective approach for minimizing construction claims in the KSA.

Measuring the impact of lean implementation on BIM and project success: case of construction firms

PurposeThe main purpose of this study is to reveal the degree of association between lean, building information modeling (BIM) and construction project success. The study further intends to provide strategies for high and low associations of the factors.Design/methodology/approachLean construction and BIM are two important applications that have recently gained popularity in terms of enhancing project success. Considering this impact, this study investigates the synergy between lean construction and BIM and determines to what extent these two contribute to the success of the projects. As a first step, lean, BIM and project success were examined based on an in-depth literature review. In the second stage, a structural equation model (SEM) was established to reflect the relationship among these three through hypotheses. Then, a questionnaire was designed and administered to the construction professionals experienced in both lean and BIM implementation. The SEM was tested using Analysis of Moment Structures (AMOS), an SPSS tool.FindingsThe results indicated that lean implementation has a significant and positive impact on BIM implementation and project success. On the other hand, BIM implementation had a lower significant impact on project success than lean implementation construct.Research limitations/implicationsThe results of this study can be used by both policymakers and industry practitioners in terms of developing strategies for effectively using both lean and BIM. The researchers can further develop other implementation models to investigate whether these concepts are more effective in increasing project success when used integratively.Originality/valueThis study considers both the impact of lean and BIM on project success through input from construction practitioners working on large projects. This way, the study fosters the use of lean, BIM or lean–BIM together in construction projects to enhance project success.

EVALUASI QUANTITY TAKE OFF MENGGUNAKAN AUTODESK REVIT PADA PEKERJAAN STRUKTUR BAJA PROYEK PEMBANGUNAN GEDUNG KANTOR PT. TRI KANIGARA GROUP

With the development of technology, the use of BIM (Building Information Modeling) software such as Autodesk Revit is becoming increasingly common in the construction industry. Quantity Take Off (QTO) in Autodesk Revit is the process of calculating and identifying the amount of construction materials needed for a project based on a 3D model created using the Autodesk Revit software. This study aims to evaluate the use of steel structural materials and the estimated price generated through Autodesk Revit. In the QTO calculation using Autodesk Revit, the results are the volume of WF column work of 18,117.54 kg, the volume of WF beam work of 16,084.15 kg, and the volume of nut bolt work reaching 1,894 pieces. Furthermore, the estimated cost of work is also generated by Autodesk Revit, with the cost of WF column work of Rp. 389,527,110,-, the cost of WF beam work of Rp. 345,809,225,-, and the cost of nut bolt work of Rp. 52,085,000,-. This evaluation aims to identify the accuracy and efficiency of QTO calculations using Autodesk Revit.

Let's Spill the BIMs. Reflections on the Potential of BIM Applications in Archaeology

Nowadays, there is a growing interest in applying BIM (Building Information Modeling) technologies to cultural heritage and archaeological sites. These applications are at an early stage for archaeology, but relevant issues clearly arise from the adaptation of BIM, originally intended for AEC, to such a diverse field. To highlight these problems, three case studies from Veneto (Italy) have been examined: two protohistoric burial mounds in perishable material from Padua and Este, and a Roman city gate at Altinum. The paper highlights the main difficulties encountered during the elaboration process, as well as the advantages and disadvantages of using this specific tool. The aim is to reflect on the possibilities and reasons for the use of BIM in archaeology, and possibly to start a critical theoretical discussion about it.

Use of BIM with Modular Construction in Future Construction Techniques

Modular construction technology and applications are rapidly evolving. Modular construction is a process in which entire rooms or sections of rooms are built in a factory setting along with electrical, mechanical, and plumbing work and then transported to a final site for assembly. With modular construction, a building is built off-site, under controlled facility conditions, with the same materials and to the same codes and standards as conventionally built facilities, but in half the time. The modular construction method is used to build various types of buildings (whether they are apartment houses, office buildings, or hotels). This construction method is used for both permanent and relocatable projects. These projects can be built with two types of modules. These are 2D panels or 3D modules. These can be combined to form a third type, hybrid modular construction. Each has its advantages. 2D panels offer easy logistics and flexibility in building design and are mounted on site. Factory productivity is increased by using 3D volumetric solutions. They only need to be installed once they are delivered. The hybrid modular structure has the advantages of the previous two. With the recent development of Building Information Modeling (BIM), the use of modular construction methods in conjunction with BIM becomes more common. As with any method, this one has advantages as well as disadvantages. Disadvantages of this method, such as a higher number of complex decisions, front-loaded design, etc., can be solved with BIM. Furthermore, the BIM platform can resolve the disadvantages of traditional construction methods, such as the difficulty of pre-project planning and coordination among members of interdisciplinary professions. With BIM and the modular construction method, physical conflicts between the structural system and its mechanical, electrical, and plumbing systems can be easily identified early in the design process, and resolution can be expedited. This article includes general information about the modular construction method, future application scenarios, use, and advantages of BIM. The document analysis method, one of the qualitative methods, was used, and in the light of the data obtained, comments and scenarios were tried to be created about the future of BIM and modular construction techniques. What distinguishes this study is that the concept of quality is examined in detail by using these two methods together.

Volume and Cutting Optimization of Reinforcing Steel in Construction of a Satpol PP Building Project

The world of construction is very dependent on technology, especially in the era of the industrial revolution which demands efficiency and competitiveness. The use of BIM (Building Information Modeling) technology supported by Autodesk Revit software enables more effective and efficient project planning and implementation. One application of BIM is in planning reinforcing steel requirements. To overcome material waste which often occurs due to less than optimal cutting of reinforcing steel, material management with a bar bending schedule and the use of BIM is an important solution. In the Satpol PP Building Construction Project in Bantul Regency by PT Quinad Bahana Indonesia, this new method with software was applied to correct cutting of reinforcing steel, reduce waste and increase construction efficiency. This research method includes data collection, 3D BIM modeling, comparing work volume using Autodesk Revit and conventional. After getting the reinforcing steel volume from the Autodesk Revit software, continue by entering the volume data into the BIM to obtain optimal reinforcing steel cutting patterns. The research results show that the use of Autodesk Revit software for column and beam work results in an overall difference of 11%. The volume resulting from Revit quantity take-off is less than manual analysis. Based on waste level calculations, the average value of waste level is 0.97%. This proves that the BIM is effective in reducing material waste on construction projects. Apart from reducing material waste, the BIM is also able to optimize reinforcing steel cuts.

Building Information Modeling (BIM) application towards environmental sustainability

Abstract The interest in Building Information Modeling (BIM) is increasing among researchers and construction industry players around the world including Malaysia. BIM is known as a technology that has the ability to perform three-dimensional (3D) visualization to eliminate clashes in design, which indirectly reduce rework and construction wastage. Since the Government of Malaysia is currently encouraging BIM, focusing on educating the construction players with reliable information about BIM is perceived as important. Therefore, this study aims to explore the awareness of contractors particularly on the BIM application towards environmental sustainability. A total of 133 responses were received from the data collection process and these data were analyzed to determine the role of BIM in contributing towards environmental sustainability from the contractors’ perspective. The finding reveals that the awareness of respondents is influenced by their knowledge on BIM. Most of the contractors are aware of BIM application towards environmental sustainability, except for reducing rework. In this context, providing or educating construction players on the BIM application towards sustainability aspects is perceived necessary to create awareness and provide a better understanding in anticipation of improved use of BIM in the construction industry.

Comparative Analysis of Traditional Methods and Building Information Modeling (BIM) in Construction Project Cost Estimation

Abstract: Building Information Modeling (BIM) has revolutionized the construction industry by providing digital images of the physical and functional aspects of the site. This article explores the use of BIM in project management and compares it to traditional methods. The study focused on parameters such as efficiency, cost, accuracy, and coordination. Research shows that BIM increases efficiency, accuracy, and coordination while reducing costs and risks. However, challenges remain, such as developing regulations and reaching consensus on requirements among stakeholders. Despite these challenges, the article concludes that BIM has the potential to transform project management.

SM-BIM: A NEW CONCEPTUAL FRAMEWORK FOR MULTI-CRITERIA DECISION-MAKING PROCESS BASED ON SMART MATERIALS AND BUILDING INFORMATION MODELING

ABSTRACT Because the construction sector exerts a considerable environmental effect, especially on building materials, a growing interest in environmental design and construction has emerged. The United Nations has set sustainable development goals (SDGs) for 2030 to protect the environment, including energy conservation and doubling the global rate of improving energy efficiency, because building materials significantly affect energy consumption. Thus, building-material selection at the initial design phase is critical, and random selection of building materials often involves subjectivity, uncertainty, and ambiguity. This process costs time and resources while resulting in the inefficient environmental performance of buildings. Therefore, this study proposes the use of building-information modeling (BIM) as a tool because of its importance in attaining sustainability to aid in the selection process of smart materials (SMs) based on specified criteria and make the selection process faster and more accurate. This method is accomplished through a theoretical study of SMs and using a conceptual framework through four phases for multicriteria decision-making to improve energy efficiency and reduce the energy consumption of buildings. To pursue SDG 7, a theoretical and deductive approach is used.

Digitization of AEC Industries Based on BIM and 4.0 Technologies

BIM and 4.0 technologies are currently the leading branches of digitization in construction. The aim of this article is to confront theses on building information modeling (BIM) and coexisting technologies, and to present an analysis along with conclusions regarding the digitization process of AEC industries using BIM methodology and advanced digital technologies within the scope of 4.0 technologies. Key aspects of BIM and 4.0 technology integration were discussed, including artificial intelligence (AI) or big data and data science analytics. The impact of these fields on design processes, as well as on data management, monitoring of design and construction progress, and overall efficiency of AEC industries, was analyzed. The article pays particular attention to the synergy between BIM and 4.0 technology, identifying benefits, challenges, and development perspectives. Conclusions indicate the growing importance of interdisciplinarity for improving AEC industry processes and the need to adapt to the changing digital landscape in the field of design and construction. A survey was conducted, where respondents’ answers were presented in the form of charts. Questions focused on the issue of the use of BIM methodology along with coexisting technologies in the design process by the Polish engineering staff. The research results indicate that the use of the latest technological solutions in Poland is still rare, and the digital potential of these solutions is not fully utilized. The article can make a significant contribution to the discussion on technological evolution in AEC industries, identifying development directions in the context of digitization and the use of the latest achievements of 4.0 technology. Previous research has not included such a wide spectrum of BIM use in Poland. An analysis was conducted comparing Poland in a global context with other countries in BIM adoption.

Sustainability through the use of Building Information Modelling in infrastructure planning

This study examines the role of Building Information Modelling (BIM) in infrastructure planning from a sustainability perspective. It emphasises how BIM can contribute to the promotion of ecological, economic and social sustainability. Interviews with experts have shown that BIM can not only optimise the energy consumption of infrastructure projects, but also lead to precise material quantification and optimisation. Despite the benefits, the use of BIM in infrastructure planning is limited, especially in small and medium-sized projects and with local authorities. The study identifies challenges such as the complexity of BIM software systems and the additional costs of implementing them. Recommendations for action include training clients and engineering firms in the use of BIM for cost forecasting and extending the digital twin concept beyond the construction and planning process. The results show that widespread BIM application is only possible if both clients and planning offices share sustainability goals and are prepared to bear the additional costs for BIM planning. The work emphasises the need to use BIM beyond building construction for sustainable infrastructure development and provides insights into the practice of engineering firms in the infrastructure sector.

Assessing the implications of BIM on sustainability of construction projects through design risk management

PurposeDesign cost overrun is one of the prominent factor that can impact the sustainable delivery of the project. It can be encountered due to a lack of information flow, design variation, etc. thereby impacting the project budget, waste generation and schedule. An overarching impact of this is witnessed in the sustainability dimensions of the project, mainly in terms of economic and environmental aspects. This work, therefore, aims to assess the implications of a technological process, in the form of building information modelling (BIM), that can smoothen the design process and mitigate the risks, thus impacting the sustainability of the project holistically.Design/methodology/approachThe identified design risks in construction projects from the literature were initially analysed using a fuzzy inference system (FIS). This was followed by the focus group discussion with the project experts to understand the role of BIM in mitigating the project risks and, in turn, fulfilling the sustainability dimensions.FindingsThe FIS-based risk assessment found seven risks under the intolerable category for which the BIM functionalities associated with the common data environment (CDE), data storage and exchange and improved project visualization were studied as mitigation approaches. The obtained benefits were then subsequently corroborated with the achievement of three sustainability dimensions.Research limitations/implicationsThe conducted study strengthens the argument for the adoption of technological tools in the construction industry as they can serve multifaceted advantages. This has been shown through the use of BIM in risk mitigation, which inherently impacts project sustainability holistically.Originality/valueThe impact of BIM on all three dimensions of sustainability, i.e. social, economic and environmental, through its use in the mitigation of critical risks was one of the important findings. It presented a different picture as opposed to other studies that have mainly been dominated by the use of BIM to achieve environmental sustainability.

A phenomenological inquiry of Building Information Modelling macro-adoption in Uruguay

Building information modelling (BIM) application in the architecture, engineering and construction (AEC) sectors has received attention, particularly in most Global North countries. However, there is a dearth of literature on its application in the Global South context. This research explores insights into the uptake and use of BIM in the Uruguayan AEC sector and proposes recommendations for accelerating its adoption. This study adopted the phenomenological research design. Through interviews with experts, this study relies on phenomenological analysis of a purposely sampled group of (n = 7) experts in BIM in the Uruguayan AEC industry. The discoveries and findings confirm that BIM is still at an early stage of maturity, and many practitioners still need to be convinced of its benefits. Therefore, pilot projects and the development of BIM guidelines are essential to align industry procedures and demonstrate the benefits of implementing BIM to convince hesitant professionals and increase levels of adoption. Furthermore, organisations’ main implementation drivers are external forces such as client requirements or the need to acquire a competitive advantage. This study’s findings imply that BIM diffusion dynamics in Uruguay are more aligned with a top-down approach, thus highlighting a design for ‘push’ by authorities such as the government. Overall, this study fills a research gap in the Uruguayan AEC industry and provides an academic reference background for policymakers for future actions. The paper is of value, as it contributes to the current state-of-the-art BIM research by drawing insights from the AEC industry in a typical developing country context.

Inhibiting Factors Analysis of BIM Implementation in Jambi City’s Construction Companies

The development of information and communication technology is increasing every year, contruction sector indeed. The rapid increase in technology in the construction sector has forced all AEC actors in Indonesia to follow these developments as an effort to increase work productivity. The breakthrough that can support infrastructure development to follow the digitalization era is the use of various technologies and applications of Building Information Modeling (BIM) which have many benefits. However, for the implementation of BIM in Jambi City itself still relatively low, from the maturity level of BIM based on the model (Succar, 2010) obtained a value of 0.719 at the non-existence level, which means that the use of BIM in construction companies in Jambi City has not yet been implemented. the discovery of the potential use of BIM, even seen from the optimism of the implementation of BIM in the company, not all informants have high optimism. Therefore, a study was conducted on the inhibiting factors that hindered the implementation of BIM in construction companies in Jambi City, using interview techniques to determine the actual obstacles. The 5 highest barriers factors were identified, that is Lack of understanding of BIM and its benefits, Lack of government support, Requires high hardware specifications, High investment costs for BIM official licenses, Lack of market demand (Clients). With this research, it is hoped that the application of BIM can be better and provide maximum benefits to construction companies in Jambi City.

Quantifying BIM investment value: a systematic review

Purpose Perceived benefits of building information modelling (BIM) have been discussed for some time, but cost–benefit benchmarking has been inconsistent. The purpose of this paper is to investigate BIM feasibility and evaluate investment worth to elucidate and develop the current understanding of BIM merit. The aim of the study is to propose a research agenda towards a more holistic perspective of BIM use incorporating quantifying investment return. Design/methodology/approach An in-depth examination of research patterns has been conducted to identify challenges in the assessment of the investment value and return on investment (ROI) for BIM in the construction industry. A total of 75 research articles were considered for the final literature review. An evaluation of the literature is conducted using a combination of bibliometric analysis and systematic reviews. Findings This study, which analysed 75 articles, unveils key findings in quantifying BIM benefits, primarily through ROI calculation. Two major research gaps are identified: the absence of a standardized BIM ROI method and insufficient exploration of intangible benefits. Research focus varies across phases, emphasizing design and construction integration and exploring post-construction phases. The study categorizes quantifiable factors, including productivity, changes and rework reduction, requests for information reduction, schedule efficiency, safety, environmental sustainability and operations and facility management. These findings offer vital insights for researchers and practitioners, enhancing understanding of ’BIM’s financial benefits and signalling areas for further exploration in construction. Originality/value The ’study’s outcomes offer the latest insights for researchers and practitioners to create effective approaches for quantifying ’BIM’s financial benefits. Additionally, the proposed research agenda aims to improve the current limited understanding of BIM feasibility and investment worth evaluation. Results of the study could assist practitioners in overcoming limitations associated with BIM investment and economic evaluations in the construction industry.

Low-Cost Internet of Things Solution for Building Information Modeling Level 3B—Monitoring, Analysis and Management

The integration of the Internet of Things (IoT) and Building Information Modeling (BIM) is progressing. The use of microcontrollers and sensors in buildings is described as a level 3B maturity in the use of BIM. Design companies, contractors and building operators can use IoT solutions to monitor, analyze or manage processes. As a rule, solutions based on original Arduino boards are quite an expensive investment. The aim of this research was to find a low-cost IoT solution for monitoring, analysis and management, and integrate it with a BIM model. In the present study, an inexpensive NodeMCU microcontroller and a temperature and pressure sensor were used to study the thermal comfort of users in a single-family home. During the summer season, analysis of the monitored temperature can contribute to installation (HVAC) or retrofit work (for energy efficiency). The article presents a low-cost solution for studying the thermal comfort of users using a digital twin built-in BIM. Data obtained from sensors can support both the design and management processes. The main contribution of the article enables the design, construction and use of low-cost circuits (15.57 USD) even in small developments (single-family houses, semi-detached houses, terraced houses, atrium buildings). Combining IoT sensor telemetry with BIM (maturity level 3C) is a challenge that organizations will face in the near future.