Broadband Spectral Imaging Research Articles

Stray light analysis and suppression of broad-band spectral imaging system

Stray light analysis and suppression of broad-band spectral imaging system

Terahertz Portable Handheld Spectral Reflection (PHASR) Scanner.

We report on the development and characterization of a handheld terahertz (THz) time-domain spectroscopic scanner for broadband imaging between approximately 0.25 and 1.25 THz. We designed and fabricated a 3D-printed fiber-coupled housing which provides an alignment-free strategy for the placement and operation of the THz optics. Image formation is achieved through telecentric beam steering over a planar surface through a custom f-θ scanning lens. This design achieves a consistent resolution over the full 12 × 19 mm field of view. Broadband spectral imaging is demonstrated using a 1951 United States Air Force Resolution Test Target. The consistency of the resolution over the wide field is validated through Boehler Star resolution measurements. Finally, a practical scenario of subsurface imaging on a damaged section of an aircraft wing is demonstrated. The THz PHASR is a field-deployable imaging system with the versatility to be applied to a much broader range of targets and imaging scenarios than previously possible, from industrial non-destructive testing to clinical diagnostic imaging.

Research on Broadband Spectral Imaging Spectrometer Based on CDP

In order to satisfy the application requirements of real-time spectral imaging for moving targets, we design a static, snapshot imaging spectrometer based on a CDP(crossed dispersion prism). The spectral imaging principle is studied, and an optical system of broadband spectral imaging spectrometer is designed according to this principle. Imaging spectrometer consists of a CDP, an imaging lens and a detector, with ±2°field of view, spectral coverage from 0.6 to 5.0 μm, The results show that this instrument has a better ability to detect spectral from 0.6 to 5.0 μm while the average spectral resolution is 20 nm. The technology for dynamic target real-time spectral imaging provides a new technical way. It has a great potential for detecting, locating and identifying unknown energetic events in real-time.

Research on filter selection method for broadband spectral imaging system based on ancient murals

AbstractDigitization of cultural heritage protection has received considerable attention in heritage studies and spectral imaging technology has been playing an important role in this research. This article aims to study the technique of selecting optimal filter set to obtain ancient murals spectral image with high spectral and colorimetric accuracy based on the broadband spectral imaging system. The 330 Dunhuang murals mineral pigment color patches and the GretagMacbeth ColorChecker (CC) as well as 27 pieces of optical filters chosen as samples were examined. For each piece of filter, the three‐channel image was captured by the spectral imaging system. Then, 351 groups of six‐channel digital count images were acquired by arbitrary combinations of two among the 27 three‐channel digital count images. The pseudo‐inverse, principal component analysis, and R‐matrix methods were used to reconstruct the spectral reflectance from the six‐channel digital counts for each sample. Finally, this study identified the optimal filter set by evaluating the integrated error (TOTAL ERROR), which was calculated by normalizing the mean spectral root‐mean‐square error (RMS), mean spectral goodness‐of‐fit error (1‐GFC), and mean CIEDE2000 color difference (ΔE00) and by multiplying them together. After the optimal optic filter set was selected, it was applied to the Dunhuang murals spectral imaging and was evaluated. The results showed that the optimal optic filter set could result in promising improvement both in spectral and color accuracy when compared with the production camera. In addition, it can be used for the construction of Dunhuang murals spectral image database. © 2015 Wiley Periodicals, Inc. Col Res Appl, 41, 585–595, 2016

Characterization of an Implicitly Resistively‐Loaded Monopole Antenna in Lossy Liquid Media

Microwave tomographic imaging of the breast for cancer detection is a topic of considerable interest because of the potential to exploit the apparent high-dielectric property contrast between normal and malignant tissue. An important component in the realization of an imaging system is the antenna array to be used for signal transmission/detection. The monopole antenna has proven to be useful in our implementation because it can be easily and accurately modeled and can be positioned in close proximity to the imaging target with high-element density when configured in an imaging array. Its frequency response is broadened considerably when radiating in the liquid medium that is used to couple the signals into the breast making it suitable for broadband spectral imaging. However, at higher frequencies, the beam patterns steer further away from the desired horizontal plane and can cause unwanted multipath contributions when located in close proximity to the liquid/air interface. In this paper, we have studied the behavior of these antennas and devised strategies for their effective use at higher frequencies, especially when positioned near the surface of the coupling fluid which is used. The results show that frequencies in excess of 2 GHz can be used when the antenna centers are located as close as 2 cm from the liquid surface.

Synchrotron Spectra of Compact VLBI–Jets

AbstractWe discuss the feasibility and prospects of broad–band spectral imaging based on quasi–simultaneous multi–frequency VLBI observations.