Brilliant Colors Research Articles

Pearl‐Inspired Colored Carbon Fibers with Electromagnetic Interference and Optical Camouflage Properties

Carbon fibers (CFs) are widely used in cutting‐edge and civilian fields due to their excellent comprehensive properties such as high strength and high modulus, superior corrosion and friction resistances, excellent thermal stability, light weight, and high electrical conductivity. However, their natural ultra‐black appearance is difficult to meet the aesthetic needs of today's civilian sector and the need for optical stealth in the military field. In addition, conventional coloring methods are difficult to effectively adhere to CF surfaces due to high crystallinity and highly inert surface caused by their graphite‐like structure. In this work, inspired by the nacre structural color of pearls, colored CFs with 1D photonic crystal structure are prepared by cyclically depositing amorphous (Al2O3 + TiO2) layers on the surface of carbon CFs through atomic layer deposition (ALD). The obtained CFs exhibit brilliant colors and excellent environmental durability in extreme environments. Moreover, the colored CFs also exhibit high EMI shielding effectiveness (45 dB) and optical stealth properties, which can be used in emerging optical devices and electromagnetic and optical stealth equipment.

Hydroxypropyl Cellulose-Based Meter-Long Structurally Colored Fibers for Advanced Fabrics.

Structurally colored fibers are attractive alternatives to chemically colored fibers due to their rich optical properties, color stability, and environmental friendliness. However, the fabrication of structurally colored fibers using cost-effective raw materials with the possibility to scale up remains challenging. Here, a simple and scalable approach is developed to fabricate continuous meter-long structurally colored fibers exhibiting brilliant structural colors across the visible spectrum and helix orientation-dependent polarization states. The fibers are fabricated by extrusion of concentrated aqueous solutions of chemically crosslinked hydroxypropyl cellulose (HPC). The wavelengths and polarization states can be tuned by solution concentration, relaxation time, and collector's surface energy. The HPC-based structurally colored fibers display excellent optical stability to mechanical straining, repeated drying/water impregnation, and prolonged heating at 150°C. It is demonstrated that the HPC-based structurally colored fibers can be woven into structurally colored fabrics with wavelength- and polarization-coded optical patterns. The current work presents a strategy to tune the chiral nematic order, which constitutes an important step toward mass production of structurally colored fibers with stable and rich optical properties using easily available raw materials.

Meso-Hydroxylmethyl-1,3,5,7-tetramethylBODIPY: A Visible-Light Photoremovable Protective Group for Carboxyl Groups

AbstractA meso-BODIPY-type photoremovable protecting group for carboxyl group is developed. BODIPYs are well-known for brilliant color, favorable to reaction monitoring and purification. meso-BODIPY esters are achieved via esterification in 44–89% yields, while deprotection is fulfilled under irradiation of blue LED bulb in the presence of photocatalyst and organic hydrogen donor in 43–95% yields. This method is applicable to a variety of acids, such as aromatic, heteroaromatic, alkyl, α,β-unsaturated carboxylic acids, etc. Our BODIPY-deprotective condition is almost neutral that both methyl and tert-butyl esters are compatible.

Facile Synthesis of Soft Core-Shell Nanospheres for Constructing Multiresponsive Photonic Crystal Security Patterns.

Responsive photonic crystals (RPCs) presenting tunable structural colors under external stimuli are widely applied in the fields of dynamic displays, sensors, and anticounterfeiting. However, the development of multiresponsive photonic crystal (MRPC) films possessing versatile variable optical properties remains a significant challenge due to the tedious synthetic procedure of multifunctional building blocks and complex assembly processes, thereby constraining their extensive applications. In the present work, a series of soft nanospheres with a hydrophobic cores and responsive hydrophilic shells have been synthesized by a facile one-step surfactant-free emulsion polymerization method. The MRPC patterns were then prepared by depositing soft nanosphere emulsions onto the 3D-printed substrates with a topological structure followed by drying at room temperature. The shells of soft nanospheres deformed and fused with each other, resulting in the formation of transparent MRPC film patterns. The MRPC patterns exhibited brilliant structural color in a wet state but lost the color again after complete drying. Such a reversible structural color was ascribed to the change of the refractive index (RI) of the hydrophilic shell layers of nanospheres according to wetting/drying state shifting. Moreover, the on-demand designed MRPC patterns could rapidly respond to external stimuli of temperature, pH, and organic solvents in a reversible manner, and multichannel encrypted security labels were also demonstrated. We postulate that our facile and feasible approach can be applied to the systematic design and large-scale production of MRPC patterns for a variety of applications.

Preparation and optical characterization of 3D-TiO2 thin films with brilliant colors

In this paper, three-dimensional titanium dioxide (3D-TiO2) thin films with periodic structure were obtained by periodic pulse anodization of high-purity titanium wafers under specific alternating voltage (AV) using asymmetric sawtooth waveforms. The effect of voltage amplitude and electrolyte concentration on the structural color of the 3D-TiO2 thin films were investigated. It is shown that the nanotubes grown by asymmetric sawtooth wave at a specific AV have a “bamboo” shape, and the cycle length, as well as the inner and outer tube diameters of the nanotubes are closely related to the AV. The structural color of the samples was different at varying voltages and electrolyte concentrations for the same oxidation cycle time. The structural color of films grown under low voltage is analyzed to be related to the scattering and absorption of light on their surfaces. The thickness of the film grown under high voltage satisfies the conditions for light interference. The maximum reflected wavelength is red-shifted and then blue-shifted as the electrolyte concentration decreases. The study shows that the microstructure is the main influence on the color change of 3D-TiO2 thin films.

Bioinspired Polydopamine Modification for Interface Compatibility of PDMS-Based Responsive Structurally Colored Textiles.

Textiles that can repeatedly change color in the presence of external stimuli have attracted great interest. Effectively designing to produce such functional textiles is essential, yet there remain challenges like producing stable coloration, rapid response, and reverse color changing. Here, the preparation of a magnetic field response (MFR) textile with a fast magnetic field response, brilliant structural coloration, and mechanical robustness is reported. The MFR textile is knitted by incorporating magnetic particles' ethylene glycol (EG) suspension within polydimethylsiloxane (PDMS)-based fibers. A surface modification strategy is designed to prevent EG from seeping out along the PDMS polymer chains. A PDMS fiber is encapsulated in waterborne polyurethane, and a polydopamine joint layer is used. The MFR textile demonstrates magnetic field-triggered structural colors, and the breaking strength and elongation at break of each composite fiber are improved. In addition, multishaped patterns can be printed on the MFR textile with the help of the photo etching technology, which enhances the applications of the new functional textiles.

Functional structural color based on Cu2O nanospheres with brilliant colors and excellent antibacterial properties

Functional structural color based on Cu2O nanospheres with brilliant colors and excellent antibacterial properties

Patterned Photonic Actuators with Dynamic Shape-Morphing and Color-Changing Capabilities Fabricated by Athermal Embossing Technology.

Stimuli-responsive patterned photonic actuators, characterized by their patterned nano/microscale structures and capacity to demonstrate synergistic color changes and shape morphing in response to external stimuli, have attracted intense scientific attention. However, traditional patterned photonic actuator systems still face limitations such as cumbersome and time-consuming preparation processes and small-scale deformations. Herein, we introduce a facile approach involving an athermal embossing technique to rapidly fabricate patterned photonic actuators based on near-infrared (NIR) light-responsive liquid crystal elastomers. The resulting patterned photonic actuators demonstrate remarkable features, including brilliant angle-dependent structural color, complex three-dimensional actuation, and good color durability under NIR light stimulation. As illustrative demonstrations of the proof-of-concept, we fabricate two light-fuelled patterned photonic soft actuators: a butterfly-inspired actuator that can produce wing-flapping dynamic changes in structural color, and an origami crane-shaped actuator with shape memory, structural color information storage, and dynamic display properties. This strategy provides distinct insights into the design and fabrication of various patterned photonic soft robotic devices and intelligent actuators.

Electrically Responsive Photonic Crystals with Enhanced Suspension Stability and Color Saturation for Electrophoretic Displays and Smart Windows.

Electrophoretic displays (EPDs) based on photonic crystals show great potential due to their reduced eye fatigue and low power consumption. However, the current image quality and service life of this system still face great challenges. In this work, we fabricated a new kind of electrically responsive photonic crystal (ERPC) device based on PSMA@SiO2 liquid colloidal crystals (LCCs) for EPDs. By introduction of the PSMA core with lower density and higher refractive index, the suspension stability and color saturation of PSMA@SiO2 LCCs were greatly enhanced compared with those of bare SiO2 LCCs. The PSMA@SiO2 LCCs showed brilliant colors, wide color tuning range (∼200 nm), and good reversibility under low voltages (<4 V). Interestingly, the transparency of PSMA@SiO2 LCCs could also be obviously regulated by an electric field, which was different from the traditional ways that change the thickness of PCs or contrast of refractive index (Δn) between the nanospheres and matrix. This transparency modulation offered a novel idea for the transmittance control of smart windows. As a proof of concept, we fabricated a new type of patterned ERPC device to demonstrate their potential in electrophoretic displays and smart windows with controllable transmittance under an electric field.

Revealing the Dye Components in 1250-Year-Old Japanese Textiles Via High-Performance Liquid Chromatography

ABSTRACT Since the mid-eighth century, Shosoin textiles have been continuously handed down in the Shosoin treasure repository of the Todaiji temple, Japan, and the brilliant colors of these ancient textiles have been maintained in good condition thus far. In this study, the chemical stabilities of madders (Rubia akane and R. tinctorum), gromwell (Lithospermum erythrorhizon), and blue indigo dyes remaining in the textiles passed down for more than 1250 years were examined. The dye components remaining in the silk or wool textiles were analyzed by high-performance liquid chromatography equipped with a photodiode array detector. Chromatograms of the extracts from the textiles revealed not only the principal chromophores of the dyes but also 6-hydroxyrubiadin glycosides and shikonin esters in Japanese madder and gromwell, respectively. These results indicated that the chromophore skeletons, glycoside linkages, and ester linkages of the dye components were retained for more than 1250 years after the textiles were stored in the treasure repository. These findings of the chemical stability and the ongoing degradation of ancient natural dyes help in preserving the dye components and slowing down their degradation.

Technical study on the early twentieth century’s embroidered women waistcoat in Gyalrong Tibetan area in Sichuan, China

In the early twentieth century, traditional handicraft was challenged by the latest technology in China. It is reflected by ethnic costumes combining new and old, as in the waistcoat of this study. This waistcoat made at Gyalrong Tibetan area in Sichuan, China, displays unique local features in terms of its brilliant colors and comprehensive craftsmanship. This study employs techniques such as optical microscopy, infrared spectroscopy, scanning electron microscope and high performance liquid chromatography-mass spectrometry to investigate various aspects of this waistcoat, including its fabrics and dyes. The results showed that the waistcoat was primarily made of cotton and silk, with a bamboo paper layer, and that silk as well as twisted gold and silver threads were employed for the embroidery. Various embroidery techniques were applied, with patterns, color combinations, and characteristics being consistent with those of Tibetan and Shu (蜀) embroidery. In terms of dyeing technology, a wide range of colors were achieved through multi-step dyeing processes using natural dye stuffs like pagoda bud, and synthetic dyes like magenta. These findings indicates that modern technologies were well integrated into traditional garment manufacture in the early twentieth century in China.

Novel R2R3-MYB Transcription Factor LhMYB1 Promotes Anthocyanin Accumulation in Lilium concolor var. pulchellum

Lilium concolor var. pulchellum has a brilliant flower colour, high germination rate, and resistance to cold, drought, and salinity and is an excellent source of lily germplasm. Anthocyanins are important flavonoids commonly found in plants and can make the flowers and fruits of plants more colourful. We first found that 0.2 mg/L 1-naphthaleneacetic acid (NAA) specifically induced the accumulation of anthocyanins, which were mainly cyanidins, in callus tissue culture of Lilium. Transcriptomic results indicated that anthocyanin accumulation was mainly involved in the flavonoid pathway, and an LhMYB1 transcription factor encoding 267 amino acids positively associated with anthocyanin accumulation was cloned from the MYB family. Subcellular localisation in tobacco showed that the gene was located in the nucleus of epidermal cells. Virus-induced gene silencing showed that silencing of the LhMYB1 gene on lily petals resulted in a purple to white colour change and a decrease in anthocyanin deposition, mainly in the upper and lower epidermis of the petals. Therefore, the results of this study will provide some ideas for the molecular breeding of lily flower colour.

Bioinspired Colorimetric Double Inverse Opal Photonic Crystal Indicators for Ethanol Concentration Sensing in Fermentation Engineering.

Photonic crystal-based ethanol concentration indicators with rapid response and brilliant structural color output definitely take a place in colorimetric sensors. Here, based on the H-bond-regulated swelling of acrylate shape memory polymers (SMPs) and the solvent-induced structural color change of the double inverse opal photonic crystals (DIOPCs), new-type photonic crystals (PCs) colorimetric indicators were constructed, exhibiting a span of maximum reflection wavelength (λmax) up to ∼166 nm in response to alcohols with concentrations from 0 to 100 vol %. DIOPC indicators (DIOPCIs) show a rapid response to alcohols (<1.5 s) and output different structural colors (covering from blue to red). The colorimetric sensing mechanism includes the solvent-triggered recovery of the inverse opal skeleton, the cosolvency effect and H-bonds induced swelling/shrinkage of the polymer, the phase separation between polystyrene (PS) microsphere and polymer skeleton, and the light diffraction of DIOPCs. While ensuring a larger λmax span by regulating the H-bond interactions in polymer chains through acrylamide (AAm), AAm-modified DIOPCIs are sensitive to some specific ethanol concentrations. The real-time sensing of ethanol concentration during fermentation verified the practicability of DIOPCIs, thus establishing a visual model between structural color and corresponding fermentation kinetics. We envisage that the DIOPCIs will contribute to the intelligentization of the alcoholic fermentation and distillation industry.

Brilliant thermochromic photonic liquid dominated by electrostatic repulsion

It is challenging for traditional methods to generate liquid photonic crystals (LPCs) with brilliant colors and clear self-assembly mechanisms, owing to the major limitations in solvent choice and undesired components. Here, novel LPCs with widely tunable solvents and desired components have been successfully fabricated by non-close-assembling silica particles from silica/ethanol solution into target solvents through alternative centrifugation and sonication. The as-fabricated LPCs exhibit 1) brilliant structural colors from high reflectance (maximal: 91 %) by using solvents with low refractive indexes, much higher than those (20–40 %) of traditional LPCs; 2) tunable color saturation with high precision, difficult for conventional LPCs; and 3) a clearer working mechanism: electrostatic repulsion rather than other interactions majorly dominating the non-close-packing of silica particles in solvents. Additionally, a new type of sensitive thermochromic display unit with thermo-switchable on-off structural colors has been prepared by constructing silica/bi-solvents LPCs. This work not only paves a new way for achieving thermal-responsive LPCs but also offers a new perspective for understanding colloidal assembly.

A Tunable Hydrophilic-Hydrophobic, Stimulus Responsive, and Robust Iridescent Structural Color Bionic Film with Chiral Photonic Crystal Nanointerface.

Bio-inspired in nature, using nanomaterials to fabricate the vivid bionic structural color and intelligent stimulus responsive interface as smart skin or optical devices are widely concerned and remain a huge challenge. Here, the bionic flexible film is designed and fabricated with chiral nanointerface and tunable hydrophilic-hydrophobic by the ultrasonic energy perturbation strategy and crosslinking of the cellulose nanocrystals (CNC). An intelligent nanointerface with adjustable hydrophilic and hydrophobic properties is constructed by the supramolecular assembly using a smart ionic liquid molecule. The bionic flexible film possessed the variable hydrophilic-hydrophobic, stimulus responsive, and robust iridescent structural color. The reflective wavelength and the helical pitch of the film can be easily modulated through the ultrasonic energy perturbation strategy. The bionic flexible film by covalent cross-linking has excellent robustness, good elasticity and flexibility. The tunable brilliant structural color of the chiral nanointerface is attributed to the surface charge change of the CNC photonic crystal, which is disturbed by ultrasonic energy perturbation. The bionic flexible film with tunable structure color has intelligent hydrophilic and hydrophobic stimulus response properties. The chiral bionic materials have potential applications in smart skin, optical devices, bionic materials, robots, anti-counterfeiting, colorful displays, and stealth materials.

Photography and Destination Image: An Analysis of China Eastern Airline Facebook Photographs

ABSTRACT The main purpose of this study is to explore the projected destination image represented by photographs emerging in social media from a potential DMO member. The official page of China Eastern Airlines on Facebook (@CEAir) was selected as a case study, in which a total of 40 photographs were collected and classified into five groups according to their themes. To identify the destination image of China, five groups of photographs were analyzed by using visual analysis, semiotic analysis, and multimodal discourse analysis. The main findings show that Chinese food, architecture, natural landscape, people, and ethnic minorities are common signs engaging in constructing the destination image of China. These photographs mainly adopted wide shots and brilliant color tones, which convey to overseas tourists that China is a great power with a long history, full of charm, and a contributor to global development. More importantly, not only landscape photography but also still life photography, candid photography, and travel photography are all considered to be modes of representation of the destination image. Different genres of photography employ Chinese culture as a special gaze to shape the destination image.

Colloidal Photonic Composites with a Long-Range Order by Hot-Pressing Polymer Brush-Grafted Silica Colloids.

Colloidal photonic composites (CPCs) are unique optical materials that combine flexible and responsive polymers with colloidal photonic crystals, and they have promising applications in colorful displays, optical anticounterfeiting, and visual sensors. However, conventional self-assembly strategies for constructing CPCs via solvent evaporation have faced limitations due to the meticulous regulation required during the evaporation process and typically long preparation durations. Here, we present an external force method to achieve a long-range ordered arrangement in CPCs by hot-pressing poly(2-[[(butylamino)carbonyl]oxy]ethyl acrylate (PBCOE)) brush-grafted silica colloidal particles (SiO2-g-PBCOE). We show that the hot-pressing conditions (i.e., temperature and pressure) and the silica volume fraction (φsilica) of the SiO2-g-PBCOE colloidal particles play crucial roles in determining their ordering and optical properties. By optimization of the hot-pressing temperature up to 100 °C and pressure of 5 MPa, a long-range ordered arrangement of SiO2-g-PBCOE colloidal particles with a φsilica of 20.3% can be achieved. For the effect of structural features, our findings reveal that SiO2-g-PBCOE colloidal particles featuring a higher φsilica are more prone to obtain a long-range ordered arrangement compared to a lower φsilica under hot-pressing conditions at relatively low temperature and pressure (50 °C and 5 MPa), which is mainly attributed to the chain entanglement and hydrogen bonding interactions induced by grafted longer polymer brushes, leading to additional energy inputs and weakening the ordering. Significantly, the critical φsilica (φc) of SiO2-g-PBCOE colloidal particles is discerned, strongly influencing the optical properties of the hot-pressed films. Specifically, a hot-pressed SiO2-g-PBCOE film with a critical φsilica of 29.3% displays enhanced optical properties characterized by intensified reflection peaks, narrowed full width at half-maximum (FWHM), and brilliant structural colors. Notably, in this work, we reveal the mechanism of hot-pressing-driven core-shell colloidal particle ordering and the key factors affecting the ordering of colloidal particles, i.e., chain entanglement and hydrogen-bonding interactions, which play a crucial role in obtaining CPCs with controllable structures. Moreover, angle-dependent structural color is observed in the hot-pressed SiO2-g-PBCOE film with a φsilica content of 29.3% due to the unique attributes of the highly ordered arrangement, while the films exhibit mechanochromic properties due to chain entanglement and hydrogen bonding interactions. This work provides valuable insights into the rapid construction of highly ordered CPCs and establishes a solid foundation for external force-assisted ordering of colloidal particles.

Bias voltage influence on the a-SiCx:H interlayer deposition using tetramethylsilane: Decorative applications of a-C:H thin films on steel

Hydrogenated amorphous carbon (a-C:H) is a type of coating vastly applied on steel alloys due to its low friction coefficient, high hardness, and chemical inertness. Also, its characteristic brilliant black color like onyx stone is desirable for decorative applications. Despite the beneficial properties conferred to ferrous substrates, the adhesion of a-C:H films is weakened by its residual stress. In order to improve the adhesion of a-C:H films/steel alloy structures, one adopted strategy is the addition of an interlayer. This research investigated the influence of the bias voltage applied on the deposition of hydrogenated amorphous silicon carbide (a-SiCx:H) interlayers, with tetramethylsilane (TMS) as the precursor, to promote adhesion in a-C:H/a-SiCx:H/ferrous alloy structures for decorative applications. The thicker interlayer was achieved at −600 V. Two regimes were proposed to explain this behavior considering ionization rates and resputtering rates and chemical reactions in plasma. The chemical structure in different regions of the a-SiCx:H interlayer was analyzed in detail. An increase in the applied bias voltage leads to oxygen incorporation at the a-C:H/a-SiCx:H interface. Higher bias voltages result in lower silicon content at the a-SiCx:H/steel interface, which is correlated to the −800 V sample’s poor adhesion. Finally, we have included a discussion about a new range of loads when a decorative piece is held by the hand where the critical loads for delamination of a-C:H coatings measured here are good enough for decorative applications.

Metal-organic framework photonic crystals with bidisperse particles-based brilliant structural colors and high optical transparency for elaborate anti-counterfeiting

Photonic crystals (PCs) have attracted great interest and wide applications in displays, printing, anti-counterfeiting, etc. However, two main challenges significantly hinder their applications: 1) the tradeoff between high optical transparency across the whole visible range and brilliant colors requiring a large refractive index contrast (Δn), and 2) the way of regulating structural colors by altering tens of different sizes. To address these issues, a new type of metal–organic framework (MOF)-based transparent photonic crystal (TPC) has been fabricated through self-assembling MOF particles into three-dimensional ordered structures which were then infiltrated by polydimethylsiloxane (PDMS). Compared to conventional PCs, these TPCs exhibit 1) both brilliant forward iridescent structural colors and high transmittance (>75 %) across the whole visible spectra range, and 2) conveniently adjustable colors based on bidisperse particles. The unique color-generating mechanism of the light diffraction by each plane lattice and the small Δn between MOF particles and PDMS are the keys to TPCs’ characteristics. Moreover, the prepared invisible anti-counterfeit labels can reversibly hide-reveal patterns with elaborate and exchangeable color contrast in a non-destructive way, showing potential applications in anti-counterfeiting, information encryption, and optical devices.

Analyzing the Dyeing Property of Salvia leucantha Flowers

Throughout history, people have dyed their textiles using common, locally available materials, but scarce dyestuffs that produced brilliant and permanent colors such as the natural invertebrate dyes. The current study focused on the isolation colouring molecule from the plant Salvia leucantha which is an ornamental plant with brilliant purple flowers. The flowers were extracted for dye and tested with cotton fibers. The source of pigmentation is identified as betacyanins belongs to the group of Betalains. It provides range of red shade to the cotton fiber.