Branch Angle Research Articles

Efficacy and safety of the contralateral approach to vascular lesions in the vertebral artery: patient series.

Endovascular treatment is preferred over microsurgical clipping for intracranial aneurysms in the posterior circulation. However, access to lesions, particularly those in the regions of the vertebral artery (VA) and the posterior inferior cerebellar artery (PICA), is technically challenging in terms of the vessel diameter of the ipsilateral VA or the branching angle of the PICA. Nine cases of intracranial aneurysms in the region of the PICA, which were endovascularly treated with an approach beyond the vertebrobasilar junction (VBJ) from the contralateral VA in the last 4 years, are described herein. All procedures, namely stent deployment, the use of a balloon catheter, and coiling, were safely performed using the contralateral approach. Neither rebleeding nor ischemic complications occurred. All patients had favorable outcomes and no recurrence. All aneurysms were successfully treated using an adjunctive technique with an additional approach beyond the VBJ from the contralateral VA. The combination of both ipsilateral and contralateral approaches to VA-PICA or PICA lesions contributes to safe and effective endovascular treatment. https://thejns.org/doi/10.3171/CASE24420.

Geometric flow control in lateral flow assays: Macroscopic two-phase modeling

Lateral flow assays (LFAs) are widely employed in a diverse range of applications, including clinical diagnostics, pharmaceutical research, forensics, biotechnology, agriculture, food safety, and environmental analysis. A pivotal component of LFAs is the porous polymeric membrane, which facilitates the capillary-driven movement of fluids, known as “imbibition,” in which a wetting fluid displaces a non-wetting fluid within the pore space of the membrane. This study presents a multi-scale modeling framework designed to investigate the imbibition process within LFAs. The framework integrates microscopic membrane characteristics into a macroscopic two-phase flow model, allowing the simulation of imbibition in membranes with different micro-scale properties and macro-scale profiles. The validity of the model was established through comparative analysis with documented case studies, a macro-scale single-phase flow model, and experimental observations, demonstrating its accuracy in simulating the imbibition process. The study also examines imbibition in various geometric configurations, including bifurcated (Y-shaped) and multi-branch geometries commonly found in multiplexed LFAs. The influence of geometric features such as length ratio, width ratio, branching angle, bifurcation point location, and asymmetry on fluid transport is investigated. Results indicate that membranes with larger branching angles exhibit slower imbibition. In addition, the influence of membrane type on macroscopic flow patterns is evaluated, showing that membranes with lower permeability require longer imbibition times. The insights gained from this research support a data-driven strategy for manipulating wetting behavior within LFAs. This approach can be leveraged to optimize the performance of LFAs and increase their effectiveness in various applications.

Frictional forces in stent retriever procedures: The impact of vessel diameter, angulation, and deployment position.

Mechanical thrombectomy has improved the outcome of patients with acute ischemic stroke, but complications such as subarachnoid hemorrhage (SAH) can worsen the prognosis. This study investigates the frictional forces exerted by stent retrievers (SRs) on vessel walls, hypothesizing that these forces contribute to vascular stress and a risk of hemorrhage. We aimed to understand how vessel diameter, curvature, and stent deployment position influence these forces. Using a silicone vascular model simulating the middle cerebral artery, we created virtual vessels with diameters of 2.0 mm and 2.5 mm, each with branching angles of 60° and 120°. A Trevo NXT (4 × 28 mm) SR was deployed and retracted through these models, measuring the maximum static frictional force at the moment the SR began to move. The stent deployment position relative to the curvature (straight, distal 1/4, center, and proximal 1/4) was also varied to assess its impact on frictional forces. Each condition was tested 15 times, and the results were statistically analyzed. The highest frictional force was observed in the 2.0 mm/120° model, followed by the 2.0 mm/60°, 2.5 mm/120°, and 2.5 mm/60° models. Narrower and more sharply curved vessels exhibited significantly higher frictional forces. Friction also increased with more distal stent deployment, particularly in the narrower vessels. Smaller vessel diameters, greater curvature, and more distal stent deployment positions increase frictional forces during thrombectomy, potentially leading to SAH. These findings highlight the importance of selecting appropriately sized SRs and considering stent deployment positions to minimize vascular stress.

Genomic prediction of cereal crop architectural traits using models informed by gene regulatory circuitries from maize.

Plant architecture is a major determinant of planting density, which enhances productivity potential for crops per unit area. Genomic prediction is well positioned to expedite genetic gain of plant architectural traits since they are typically highly heritable. Additionally, the adaptation of genomic prediction models to query predictive abilities of markers tagging certain genomic regions could shed light on the genetic architecture of these traits. Here, we leveraged transcriptional networks from a prior study that contextually described developmental progression during tassel and leaf organogenesis in maize (Zea mays) to inform genomic prediction models for architectural traits. Since these developmental processes underlie tassel branching and leaf angle, 2 important agronomic architectural traits, we tested whether genes prioritized from these networks quantitatively contribute to the genetic architecture of these traits. We used genomic prediction models to evaluate the ability of markers in the vicinity of prioritized network genes to predict breeding values of tassel branching and leaf angle traits for 2 diversity panels in maize and diversity panels from sorghum (Sorghum bicolor) and rice (Oryza sativa). Predictive abilities of markers near these prioritized network genes were similar to those using whole-genome marker sets. Notably, markers near highly connected transcription factors from core network motifs in maize yielded predictive abilities that were significantly greater than expected by chance in not only maize but also closely related sorghum. We expect that these highly connected regulators are key drivers of architectural variation that are conserved across closely related cereal crop species.

Transcriptome Analysis Deciphers the Underlying Molecular Mechanism of Peanut Lateral Branch Angle Formation Using Erect Branching Mutant.

Background The growth habit (GH), also named the branching habit, is an important agronomic trait of peanut and mainly determined by the lateral branch angle (LBA). The branching habit is closely related to peanut mechanized farming, pegging, yield, and disease management. Objectives However, the molecular basis underlying peanut LBA needs to be uncovered. Methods In the present study, an erect branching peanut mutant, eg06g, was obtained via 60Co γ-ray-radiating mutagenesis of a spreading-type peanut cultivar, Georgia-06G (G06G). RNA-seq was performed to compare the transcriptome variation of the upper sides and lower sides of the lateral branch of eg06g and G06G. Results In total, 4908 differentially expressed genes (DEGs) and 5833 DEGs were identified between eg06g and G06G from the lower sides and upper sides of the lateral branch, respectively. GO, KEGG, and clustering enrichment analysis indicated that the carbohydrate metabolic process, cell wall organization or biogenesis, and plant hormone signal transduction were mainly enriched in eg06g. Conclusions Further analysis showed that the genes involved in starch biosynthesis were upregulated in eg06g, which contributed to amyloplast sedimentation and gravity perception. Auxin homeostasis and transport-related genes were found to be upregulated in eg06g, which altered the redistribution of auxin in eg06g and in turn triggered apoplastic acidification and activated cell wall modification-related enzymes, leading to tiller angle establishment through the promotion of cell elongation at the lower side of the lateral branch. In addition, cytokinin and GA also demonstrated synergistic action to finely regulate the formation of peanut lateral branch angles. Collectively, our findings provide new insights into the molecular regulation of peanut LBA and present genetic materials for breeding peanut cultivars with ideotypes.

Effects of Dip Angle on Rupture Propagation Along Branch Fault Systems

ABSTRACT An important consideration in assessing seismic hazards is determining what is likely to happen when an earthquake rupture encounters a geometric complexity such as a branch fault. Previous studies showed parameters such as branch angle, stress orientation, and stress heterogeneity as key factors in the self-determined rupture path on branch faults. However, most of these studies were conducted in 2D or 3D with perfectly vertical faults. Therefore, in this study, we investigate the effects of dipping angle on rupture propagation along a branch fault system. We construct 3D finite-element meshes where we vary the dip angles (nine geometries in total) of the main and secondary faults, the stressing angle (Ψ=20°, 40°, and 65°), and the hypocenter location with nucleation on both the main and secondary segments. We find that for Ψ=40°, a rupture on the main fault is most likely to propagate across the branch intersection when the secondary fault is dipping. In addition, for Ψ=65°, a rupture on the secondary fault is most likely to propagate to the main fault when the secondary fault is shallowly dipping. This is caused by a fast rupture speed on the secondary fault and the dynamic stress effect that develops with the interaction of the free surface and the dipping secondary fault. These results indicate that dip angle is an important parameter in the determination of rupture path on branch fault systems, with potentially significant impact for seismic hazard, and should be considered in future dynamic rupture modeling studies.

Distribution of flow characteristics and productivity evaluation of herringbone wells in bottom water reservoirs

Abstract With the characteristics of large drainage area and low drilling cost, the herringbone wells have become an important way to increase the well production, delay the coning and ridge of bottom water and improve the development effect. Due to the complexity of the herringbone wells flow characteristics, results that exists certain gap between the current production prediction and the actual production, so it is of great significance to study the flow and productivity of herringbone wells. In this paper, taking bottom-water reservoir as the research object, considering the interference between branch wellbore and perforations, analysis the flow characteristics and the productivity sensitivity factors of herringbone wells. The results show that the transient flow time in the reservoir is short, the closer to the wellbore, the greater the pressure changes. With the increases of the branches number, branches length and branch angle, the per unit length of the wellbore radial inflow decreases, and the decrease slows down after exceeding 3 branches. In the high anisotropy reservoirs, the phase angle has greater impact on the productivity of the herringbone well when the perforation density is low, at 180°, phase angle is best; when the perforation density exceeds 16 shots/m, the increase of productivity degree decreases. This study provides important guiding significance for the actual application in oil fields to optimizing the herringbone wells shape, rational production allocation, specifying reasonable work systems and enhance oil recovery in the bottom water reservoirs.

Experimental Study on the Design and Cutting Mechanical Properties of Bionic Pruning Blades

This study focuses on existing pruning equipment; cutting blades show cutting resistance and lead to high energy consumption. Using finite element (FEA) numerical simulation technology, the branch stress wave propagation mechanism during pruning was studied. The cutting performance of the bionic blade was evaluated with cutting energy consumption as the test index and the branch diameter and branch angle as the test factors, respectively. The test results showed that the blades imitating the mouthparts of the three-pecten bull and the beak of the woodpecker performed well in pruning, and the energy consumption during cutting was reduced by 18.2% and 16.3% compared to traditional blades, making these blades significantly better. These two blades also effectively reduced the cutting resistance and branch splitting by optimizing the edge angle design and increasing the slip-cutting action. In contrast, the imitation shark’s tooth blade increased cutting energy consumption by 14.4% due to the large amount of cutting resistance in the cutting process when cutting larger-diameter branches, making it unsuitable for application in the pruning field. Therefore, the blades imitating the mouthparts of the three pectins and the beak of the woodpecker have significant advantages in reducing the cutting resistance and improving the pruning quality. These findings provide an important theoretical reference for the development of energy-efficient pruning equipment.

A flexible generative algorithm for growing in silico placentas.

The placenta is crucial for a successful pregnancy, facilitating oxygen exchange and nutrient transport between mother and fetus. Complications like fetal growth restriction and pre-eclampsia are linked to placental vascular structure abnormalities, highlighting the need for early detection of placental health issues. Computational modelling offers insights into how vascular architecture correlates with flow and oxygenation in both healthy and dysfunctional placentas. These models use synthetic networks to represent the multiscale feto-placental vasculature, but current methods lack direct control over key morphological parameters like branching angles, essential for predicting placental dysfunction. We introduce a novel generative algorithm for creating in silico placentas, allowing user-controlled customisation of feto-placental vasculatures, both as individual components (placental shape, chorionic vessels, placentone) and as a complete structure. The algorithm is physiologically underpinned, following branching laws (i.e. Murray's Law), and is defined by four key morphometric statistics: vessel diameter, vessel length, branching angle and asymmetry. Our algorithm produces structures consistent with in vivo measurements and ex vivo observations. Our sensitivity analysis highlights how vessel length variations and branching angles play a pivotal role in defining the architecture of the placental vascular network. Moreover, our approach is stochastic in nature, yielding vascular structures with different topological metrics when imposing the same input settings. Unlike previous volume-filling algorithms, our approach allows direct control over key morphological parameters, generating vascular structures that closely resemble real vascular densities and allowing for the investigation of the impact of morphological parameters on placental function in upcoming studies.

Fine-mapping of a QTL and identification of candidate genes associated with the lateral branch angle of peanuts (Arachis hypogaea L.) on chromosome B05.

Peanuts play a crucial role as an oil crop, serving not only as a primary source of edible oil but also offering ample protein and vitamins for human consumption. The lateral branch angle of peanuts is the angle between the main stem and the first pair of lateral branches, which is an important agronomic trait of peanuts, significantly impacts the peg penetration into the soil, plant growth, and pod yield. It is closely intertwined with planting density, cultivation techniques, and mechanized harvesting methods. Therefore, the lateral branch angle holds substantial importance in enhancing peanut yield and facilitating mechanization. In order to conduct in-depth research on the lateral branch angle of peanuts, this research is grounded in the QTL mapping findings, specifically focusing on the QTL qGH associated with the lateral branch angle of peanuts located on chromosome B05 (142610834-146688220). By using Jihua 5 and PZ42 for backcrossing, a BC1F2 population comprising 8000 individual plants was established. Molecular markers were then developed to screen the offspring plants, recombine individual plants, conduct fine mapping. he results showed that using the phenotype and genotype of 464 recombinant individual plants selected from 8000 offspring, narrow down the localization interval to 48kb, and designate it as qLBA. The gene Arahy.C4FM6Y, responsible for the F-Box protein, was identified within qLBA through screening. Real-time quantitative detection of Arahy.C4FM6Y was carried out using M130 and Jihua 5, revealing that the expression level of Arahy.C4FM6Y at the junction of the main stem and the first lateral branch of peanuts was lower in M130 compared to Jihua 5 during the growth period of the first lateral branch from 1 to 10 centimeters. Consequently, Arahy.C4FM6Y emerges as a gene that restrains the increase in the angle of the first lateral branch in peanuts. This investigation offers novel genetic reservoirs for peanut plant type breeding and furnishes a theoretical foundation for molecular marker-assisted peanut breeding.

CNGC20 plays dual roles in regulating plant growth and immunity in Brassica napus

Inflorescence architecture is determined by inflorescence length, branch angles and the density of siliques, which affects planting density, lodging resistance and mechanical operation in rapeseed. However, the molecular mechanisms controlling inflorescence architecture are poorly understood, restricting the progress of breeding varieties with ideal plant architecture in oilseed rape. In this study, we have identified and characterized a rapeseed inflorescence development mutant, reduced inflorescence length (ril), which exhibits determinate and shortened inflorescences, reduced plant height, compact branches, and increased silique density. Through BSA-seq and map-based cloning, we find that RIL encodes a cyclic nucleotide-gated channel 20 (BnaA01.CNGC20). A substitution of proline at the 304th position to leucine (P304L) was identified in the conserved transmembrane domain of BnaA01.CNGC20. This P304L substitution neither affects the subcellular localization and self-assembly of BnaA01.CNGC20, nor disrupts the interactions with BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1 (BAK1), which interacts with CNGC20 and phosphorylates it to regulate Ca2+ channel stability. However, the P304L substitution increases channel activity and Ca2+ influx, which in turn induces immune responses such as cell death, H2O2 accumulation, upregulation of pathogenesis-related genes, and pattern-triggered immunity. The enhanced immunity improves the resistance to Leptosphaeria biglobosa and Sclerotinia sclerotiorum. Transcriptome analysis further revealed that CNGC20 plays dual roles in regulating plant growth and immunity via the brassinosteroid and auxin signaling pathways. The findings in this study provide deeper insights into the intricate relationship between cytosolic Ca2+ level and plant development and immunity, as well as the trade-off between immunity and the performance of yield-related traits in the heterozygous plants (+/ril), which may serve as a guide for balancing yield and disease resistance in oilseed rape breeding.

Light Scattering From High‐Porosity 3D Simulants of the Lunar Regolith at Small Phase Angles

AbstractLunar regolith consists of unconsolidated grains with high porosity, called the fairy castle structure. It is closely linked to the lunar opposition effect, which is the effect where brightness sharply increases as the phase angle approaches 0. However, owing to the Earth's gravity, it is difficult to reproduce the structure to study the physical characteristics of the lunar fairy castle structure in the laboratory. We designed a lunar fairy castle structure model for 3D printing. These models had high porosity and were simplified to tree‐like shapes. Various porous conditions of the surface were considered, represented by the number of trees, maximum trunk length, and maximum branch angle. In this study, a laboratory experiment was conducted to measure the reflectance of simulants with a fairy castle structure within a small phase angle range from 1.4 to 5.0. The result is analyzed for the sample porosity with the tangential slope of the reflectance S, which denotes the strength of the opposition effect. In addition, the results of this study were compared with lunar observation data. The porous samples exhibited a relatively large S value. The influence of branch length and attachment angle was very weak in this study. Samples with a porosity between 0.78 and 0.82 represent the similar S values to the lunar observation data, a mean porosity of lunar regolith. In conclusion, our findings suggest a potential correlation between porosity and the opposition effect in printed samples, proposing a new research approach for understanding the lunar opposition effect.

Relationship between the angle of popliteal artery trifurcation branches and atherosclerosis burden in chronic peripheral arterial disease

Aim: The aim of this study was to investigate the relationship between the angles of the popliteal artery trifurcation branches and atherosclerosis burden in patients with peripheral arterial disease (PAD). Material-Methods: Digital subtraction angiography (DSA) images of patients who underwent angioplasty for lower extremity PAD between April 2021 and 2023 were retrospectively analysed. The study excluded non-type 1a popliteal artery branching variations, critical stenosis or occlusion cases, and those with motion artifacts or previous femoropopliteal bypass operations. Angles of the anterior tibial artery (ATA), posterior tibial artery (PTA), and fibular artery (FA) were measured. Atherosclerosis burden was scored from 0 to 18 based on luminal narrowing and occlusion in each artery. Spearman correlation analysis was used to examine the relationship between trifurcation angles and atherosclerosis burden. Results: A total of 68 patients were included, with a mean age of 65 years. Angioplasty was performed on the right side in 56% of patients and on the left side in 44%. The ATA angle showed a weak positive correlation with atherosclerosis burden (rs = 0.144, p = 0.29). In contrast, PTA and FA angles exhibited moderate (rs = 0.398, p = 0.001) and strong (rs = 0.599, p < 0.001) positive correlations, respectively. Conclusion: This study highlights the significant association between the angulation of popliteal artery trifurcations and atherosclerosis burden, suggesting that vessel geometry should be considered in the management of PAD.

Coronary Artery Dimensions on Computed Tomography Following the Neonatal Arterial Switch Operation for the Complete Transposition of the Great Arteries.

Coronary events are life-threatening long-term complications of the arterial switch operation for complete transposition of the great arteries. The aim of our study was to assess the dimensions of the reimplanted coronary arteries and their relationship with the various geometric characteristics to gain a better understanding of the involved mechanisms. Coronary computed tomography angiography (CCTA) scans of 78 asymptomatic pediatric patients were performed at the age of 10.7 (6.3-17.8) years. The position of the ostia, the branching angles, and the diameters of the coronary arteries were determined in a subgroup of 51 patients presenting the usual preoperative coronary anatomy. Mean Z-score of the left main coronary artery (LMCA), left anterior descending coronary artery (LAD), left circumflex coronary artery (LCX), and right coronary artery (RCA) diameters were 0.7 ± 1.2, - 0.4 ± 1.1, - 0.3 ± 1.1, and - 0.3 ± 1.1, respectively. The Z-score of the ostial LMCA diameter had a positive correlation with the remoteness from the main pulmonary artery (p < 0.001) and the branching angle (p = 0.001). The ostial diameter Z-score of the LMCA had a negative correlation with the interval between the arterial switch operation and the CCTA (p = 0.004). Even though most of the coronary diameters fell within the accepted range, which suggests normal overall development, acute branching angle and more anterior origin were associated with smaller ostial coronary artery diameter Z-scores. To prove the clinical relevance of the smaller ostial diameter of high-risk left coronary arteries and the decrease of ostial coronary artery Z-scores over time needs further follow-up studies.

AI-based fully automatic analysis of retinal vascular morphology in pediatric high myopia

PurposeTo investigate the changes in retinal vascular structures associated with various stages of myopia by designing automated software based on an artificial intelligence model.MethodsThe study involved 1324 pediatric participants from the National Children’s Medical Center in China, and 2366 high-quality retinal images and corresponding refractive parameters were obtained and analyzed. Spherical equivalent refraction (SER) degree was calculated. We proposed a data analysis model based on a combination of the Convolutional Neural Networks (CNN) model and the attention module to classify images, segment vascular structures, and measure vascular parameters, such as main angle (MA), branching angle (BA), bifurcation edge angle (BEA) and bifurcation edge coefficient (BEC). One-way ANOVA compared parameter measurements between the normal fundus, low myopia, moderate myopia, and high myopia groups.ResultsThe mean age was 9.85 ± 2.60 years, with an average SER of -1.49 ± 3.16D in the right eye and − 1.48 ± 3.13D in the left eye. There were 279 (12.38%) images in the normal group and 384 (16.23%) images in the high myopia group. Compared with normal fundus, the MA of fundus vessels in different myopic refractive groups was significantly reduced (P = 0.006, P = 0.004, P = 0.019, respectively), and the performance of the venous system was particularly obvious (P < 0.001). At the same time, the BEC decreased disproportionately (P < 0.001). Further analysis of fundus vascular parameters at different degrees of myopia showed that there were also significant differences in BA and branching coefficient (BC). The arterial BA value of the fundus vessel in the high myopia group was lower than that of other groups (P = 0.032, 95% confidence interval [CI], 0.22–4.86), while the venous BA values increased (P = 0.026). The BEC values of high myopia were higher than those of low and moderate myopia groups. When the loss function of our data classification model converged to 0.09, the model accuracy reached 94.19%.ConclusionThe progression of myopia is associated with a series of quantitative retinal vascular parameters, particularly the vascular angles. As the degree of myopia increases, the diversity of vascular characteristics represented by these parameters also increases.

Analysis and comparison of retinal vascular parameters under different glucose metabolic status based on deep learning.

To develop a deep learning-based model for automatic retinal vascular segmentation, analyzing and comparing parameters under diverse glucose metabolic status (normal, prediabetes, diabetes) and to assess the potential of artificial intelligence (AI) in image segmentation and retinal vascular parameters for predicting prediabetes and diabetes. Retinal fundus photos from 200 normal individuals, 200 prediabetic patients, and 200 diabetic patients (600 eyes in total) were used. The U-Net network served as the foundational architecture for retinal artery-vein segmentation. An automatic segmentation and evaluation system for retinal vascular parameters was trained, encompassing 26 parameters. Significant differences were found in retinal vascular parameters across normal, prediabetes, and diabetes groups, including artery diameter (P=0.008), fractal dimension (P=0.000), vein curvature (P=0.003), C-zone artery branching vessel count (P=0.049), C-zone vein branching vessel count (P=0.041), artery branching angle (P=0.005), vein branching angle (P=0.001), artery angle asymmetry degree (P=0.003), vessel length density (P=0.000), and vessel area density (P=0.000), totaling 10 parameters. The deep learning-based model facilitates retinal vascular parameter identification and quantification, revealing significant differences. These parameters exhibit potential as biomarkers for prediabetes and diabetes.

Design of alveolar biomimetic enhanced heat transfer structure for cylindrical lithium battery pack

Aiming to address the issue of thermal runaway in high energy density batteries during high charge and discharge rates, a heat management system for an alveolar-like honeycomb liquid-cooled power battery was designed. This system is inspired by the bionic concept of cell cooling in biological tissues, with cylindrical batteries serving as cells and cooling channels resembling blood vessels. The cooling system for a battery pack consisting of 24 cylindrical cells was designed and implemented. Numerical simulations were conducted to optimize and study the effects of inlet diameter, branch angle, flow rate, and spiral baffle on coolant flow uniformity and temperature distribution within the battery pack. The results indicate that as the inlet diameter of the fractal channel increases from 2 mm to 20 mm, the coolant flow uniformity improves and the pressure drop decreases. However, the influence of inlet diameter diminishes after reaching a certain limit. When the inlet diameter increases from 10 mm to 20 mm, the relative standard deviation of the velocity at the branch outlet decreases only slightly, from 0.9 % to 0.8 %. Increasing the branch angle from 30° to 75° leads to an increase in the relative standard deviation of velocity, from 0.79 % to 1.24 %. Incorporating a spiral baffle into the internal flow channel of honeycomb cooling significantly enhances temperature uniformity within the battery pack while reducing maximum temperature levels considerably. Furthermore, a smaller pitch for the spiral baffle yields better cooling performance for the immersed liquid cooling thermal management system. After optimization, the maximum temperature difference is only 1.27 °C across the surface of the battery pack, achieving a remarkable temperature uniformity level of just 0.11 %.

Understanding the effects of mineralization and structure on the mechanical properties of tendon-bone insertion using mesoscale computational modeling

Tendon-bone fibrocartilaginous insertion, or enthesis, is a specialized interfacial region that connects tendon and bone, effectively transferring forces while minimizing stress concentrations. Previous studies have shown that insertion features gradient mineralization and branching fiber structure, which are believed to play critical roles in its excellent function. However, the specific structure-function relationship, particularly the effects of mineralization and structure at the mesoscale fiber level on the properties and function of insertion, remains poorly understood. In this study, we develop mesoscale computational models of the distinct fiber organization at tendon-bone insertions, capturing the branching network from tendon to interface fibers and the different mineralization scales. We specifically analyze three key descriptors: the mineralization scale of interface fibers, the mean, and relative standard deviation of the local branching angles of interface fibers. Tensile test simulations on insertion models with varying mineralization scales of interface fibers and structures are performed to mimic the primary loading condition applied to the insertion. We measure and analyze five representative mechanical properties: Young's modulus, strength, toughness, resilience, and failure strain. Our results reveal that mechanical properties are significantly influenced by the three key descriptors, with tradeoffs observed between mutually exclusive properties. For instance, strength and resilience plateau beyond a certain mineralization scale, while failure strain and Young's modulus exhibit monotonic decreasing and increasing trends, respectively. Consequently, there exists an optimal mineralization scale for toughness due to these tradeoffs. By analyzing the mesoscale deformation and failure mechanisms from simulation trajectories, we identify three fracture regimes closely related to the trends in mechanical properties, supporting the observed tradeoffs. Additionally, we examine in detail the effects of the mean and relative standard deviation of local branching angles on mechanical properties and deformation mechanisms. Overall, our study enhances the fundamental understanding of the composition-structure-function relationships at the tendon-bone insertion, complementing recent experimental studies. The mechanical insights from our work have the potential to guide the future biomimetic design of fibrillar adhesives and interfaces for joining soft and hard materials.

Interfissural Fixation of the Right Middle Lobe after Video-Assisted Thoracic Surgery Right Upper Lobectomy: Bronchial Anatomical Changes and Efficacy in Preventing Torsion.

Torsion of the right middle lobe following right upper lobectomy is a rare but potentially fatal complication. To prevent this, fixation of the right middle lobe has been suggested. This study was performed to examine the impact of right middle lobe fixation on postoperative outcomes and bronchial changes. We enrolled patients who underwent curative-intent video-assisted thoracic surgery (VATS) right upper lobectomy for lung cancer from 2019 to 2022. Participants were grouped based on whether they did or did not receive right middle lobe fixation. Bronchial angles were measured using preoperative and postoperative chest computed tomography images, and postoperative outcomes and bronchial changes were compared between the 2 groups. The study included a total of 50 patients, with 17 (34%) undergoing right middle lobe fixation. All procedures were performed using VATS. No significant differences between groups were observed in preoperative characteristics or postoperative outcomes. After surgery, both groups exhibited a significant increase in the right bronchus intermedius angle and a significant decrease in the branch angle. The postoperative right bronchus intermedius angle was significantly larger in the group without right middle lobe fixation compared to the group with fixation (47.38°±10.98° vs. 39.41°±9.21°, p=0.014). Three cases of atelectasis occurred in the group that did not undergo fixation while no cases were observed in the fixation group; however, this difference was not statistically significant. Fixation of the right middle lobe reduced postoperative angulation of the right bronchus intermedius, which may help prevent postoperative atelectasis.

Effects of LAZY family genes on shoot gravitropism in Lotus japonicus

Plant architecture is an important agronomic trait to determine the biomass and sward structure of forage grass. The IGT family plays a pivotal role in plant gravitropism, encompassing both the gravitropic response and the modulation of plant architecture. We have previously shown that LjLAZY3, one of the IGT genes, plays a distinct role in root gravitropism in L. japonicus. However, the function of LAZY proteins on shoot gravitropism in this species is poorly understood. In this study, we identified nine IGT genes in the L. japonicus genome, which have been categorized into four clades based on the phylogenetic relationships of IGT proteins from 18 legumes: LAZY1, NGR (NEGATIVE GRAVITROPIC RESPONSE OF ROOTS), IGT-LIKE, and TAC1. We found that LAZY genes in the first three clades have demonstrated distinct role for modulating plant gravitropism in L. japonicus with specific impacts as follows. Mutation of the LAZY1 gene, LjLAZY1, defected the gravitropic response of hypocotyl without impacting the main stem's branch angle. In contrast, the overexpression of the NGR gene, LjLAZY3, substantially modulated the shoot's gravitropism, leading to narrower lateral branch angles. Additionally, it enhanced the shoots' gravitropic response. The overexpression of another NGR gene, LjLAZY4, specifically reduced the main stem's branch angle and decreased plant stature without affecting the shoot gravitropic response. The phenotype of IGT-LIKE gene LjLAZY2 overexpression is identical to that of LjLAZY4. While overexpression of the IGT-LIKE gene LjLAZY5 did not induce any observable changes in branch angle, plant height, or gravitropic response. Furthermore, the LjLAZYs were selectively interacted with different BRXL and RLD proteins, which should the important factor to determine their different functions in controlling organ architecture in L. japonicus. Our results deepen understanding of the LjLAZY family and its potential for plant architecture improvement in L. japonicus.