Bragg Grating Research Articles

Research and Fabrication of the Chirped Moiré Fiber Bragg Grating With Tunable Channels Based on Temperature Control

Research and Fabrication of the Chirped Moiré Fiber Bragg Grating With Tunable Channels Based on Temperature Control

Polymer-based cascaded waveguide Bragg grating for blood glucose sensing.

Waveguide Bragg grating (WBG) blood glucose sensing, as a biological sensing technology with broad application prospects, plays an important role in the fields of health management and medical treatment. In this work, a polymer-based cascaded WBG is applied to glucose detection. We investigated photonic devices with two different grating structures cascaded-a crossed grating and a bilateral grating-and analyzed the effects of the crossed grating period, bilateral grating period, and number of grating periods on the sensing performance of the glucose sensor. Finally, the spectral reflectance characteristics, response time, and sensing specificity of the cascaded WBG were evaluated. The experimental results showed that the glucose sensor has a sensitivity of 175 nm/RIU in a glucose concentration range of 0-2 mg/ml and has the advantages of high integration, a narrow bandwidth, and low cost.

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

A novel fiber Bragg grating (FBG) sensing system, based on an optically injected distributed feedback laser diode (DFB-LD) with an optoelectronic oscillating (OEO) loop, is proposed and experimentally demonstrated for temperature measurements with high and tunable sensitivity. The FBG sensor device works as an edge filter to adjust the optical power of the injected beam in response to temperature variations. The optically injected DFB-LD works at Period-one (P1) oscillating state, and the central wavelength of the oscillating mode of the DFB-LD can be tuned by the variable power of the injected beam. Furthermore, an OEO loop is implemented to improve the signal quality of the generated P1 microwave signal. Hence, the sensing parameter of temperature is converted to the frequency variation of the generated P1 microwave signal in the proposed sensing system. In the proof-of-concept experiment, a series of P1 microwave signals are generated while different temperatures are applied to the FBG sensor. The sensitivity of the proposed FBG sensing system for temperature measurements can be tuned from 0.44322 GHz/°C to 1.25952 GHz/°C. The stability and repeatability experiments are also performed, demonstrating the high measurement accuracy (0.0629°C) and low error of the system. The proposed FBG-based sensing and interrogation system exhibits high sensitivity, large tunability, good linearity, and flexible sensing generality.

Steel corrosion process in ultra-high performance concrete monitored by fiber bragg grating sensor

The steel corrosion in Ultra-High Performance Concrete (UHPC) would cause degradation of structural performance or even structural failure. It is an urgent need to monitor and predict the steel corrosion in UHPC, however it is still a tough task. In this paper, Fiber Bragg Grating (FBG) sensors are applied for monitoring the steel corrosion process in UHPC, by combining with steel bar, which is equidistant winding with the sensors, and connected with power supply for accelerating corrosion. The UHPC specimens embedded with steel bars are surrounded by sodium chloride (NaCl) solution, and the steels are artificially corroded with different current densities for investigation. The steel corrosion in Original C60 and Marine Concrete 60 (Marine C60) are applied for comparison. The volume expansion coefficient for monitoring the steel corrosion process, is carried out by FBG sensors, and further comprehensively monitored by three grating sensors. The results suggest that the steel corrosion process in UHPC is slowly with current density lower than 100 μA/cm2, and largely increases with current density higher than 500 μA/cm2, the volume expansion coefficient of corroded steel in UHPC is in range of 2.02–2.62 in this test, which is much different from Original C60 and Marine C60.

In-fiber chirped Fabry-Perot cavity for temperature sensing.

Measurement resolution and dynamic range of conventional optical fiber sensors are often mutually restricted. In this work, an in-fiber chirped Fabry-Perot cavity (interferometer) is proposed, for the first time to our knowledge, to resolve the conflict between the resolution and dynamic range. The chirped Fabry-Perot interferometer is constructed by two chirped fiber Bragg gratings inscribed in the opposite directions, resulting in a gradually varied (i.e., chirp) cavity length for different reflection wavelengths. As such, the interference spectrum exhibits high figure of merit (FOM) and large free spectrum range (FSR) at long and short wavelength regions, respectively, enabling high-resolution and large-dynamic-range measurement simultaneously. Temperature tests are then carried out to confirm the validity of the solution. The proposed sensing schema may be developed further and find vital applications in biomedicine fields such as endosomatic temperature monitoring of living bodies. The proposed concept of chirped Fabry-Perot interferometer can provide breakout ideas for other sensing scenarios where high-resolution and large-dynamic range are demanded and can be further generalized to other measurands or even free-space interference metrologies.

Tunable gain clamping L-band erbium-doped fiber amplifier based on FBG and BBM

An improved structure for the L-band Erbium-doped fiber amplifier (EDFA) with gain clamping is suggested to address gain instability resulting from variations in the number of optical channels and the compromised gain clamping performance due to misalignment in the center wavelength of the grating. Here, a linear resonant cavity is formed by a broad-band mirror (BBM) and fiber Bragg grating (FBG), and a variable optical attenuator (VOA) is used for cavity loss adjustment. Experimental results show that the L-band EDFA solves the problem that the center wavelength of the narrowband grating pairs needs to be consistent. The 20 dB gain bandwidth is 42 nm(1582 ∼ 1623 nm). For signal at 1605 nm, the gain can be tuned from 28.8 to 34.8 dB, and a 40 dB (−50 to −10 dBm) gain clamped dynamic range is obtained at the gain of 28.8 dB, with stability of ± 0.25 dB, for which noise figure (NF) is less than 5.3 dB.

Design of an enhanced spatial resolution indoor plantar strain and gait analysis setup for biomedical applications

In the recent years, measurement of plantar strain and gait analysis has gained huge attention and plays a pivotal role in monitoring posture related ailments or Diabetic Foot Ulcer (DFU). Fibre Bragg Grating Arrays (closely spaced FBGs), another category of optical sensors, are employed in this study to understand the strain and gait of human foot. These arrays offer critical advantages such as enhanced sensitivity, data acquisition, multiplexing abilities, and sensor location effect compensation. For experimentation, five arrays were distributed among different regions (Upper, Medial, and Heel) of foot and their strain patterns for six volunteers (three male and three female) were recorded for eighty seconds. The data was analysed in two ways, Combined (data of array sensors were averaged to target the whole area) and Individual (for independent analysis of each sensor in array). Incoherent transitions and strain patterns of FBGs within the same arrays observed in individual analysis, explains enhanced resolution capabilities of the arrays. Strain mapping of sensor behaviour also confirmed the identification of various forms of gait i.e., Heel Strike, Flat Foot, Heel Off, and Zero Contact. The average standard deviation values for the arrays was reported below 0.16.

Remote Monitoring of Sleep Disorder Using FBG Sensors and FSO Transmission System Enabled Smart Vest

Abstract Optical sensors, particularly fiber Bragg grating (FBG) sensors have achieved a fast ingress into the fields of medical diagnostic and vital signs monitoring. Wearable smart textiles equipped with FBG sensors are catching huge research attention in different applications for measurement and monitoring of physiological parameters. In this paper, we report a simple technique for remote monitoring of sleep disorder using a smart vest implemented with four FBG stress sensors located at different sides of the vest and free space optics (FSO) transmission system. The sleep disorder of the patient is monitored in real time through shifts in the original Bragg wavelengths of sensors by stress loading during random changes in patient’s sleeping postures. The reflected wavelength from a stress loaded sensor at a certain posture is transmitted over 0.5 km long FSO channel towards remote medical center, photodetected, and then can be processed in a PC to record the restlessness in a certain time interval in terms of total number of times sleeping postures are changed, total time spent at a certain posture etc. To correctly detect the stress loaded FBG sensor at the medical center, various parameters of FBG sensors and demultiplexer are carefully adjusted to minimize the power leakages from unloaded sensors that may result into errors in the detection. Maximum dynamic range around 45 dB has been achieved ensuring accurate detection. This study not only provides a cost-efficient and non-intrusive solution for monitoring the sleep disorder of patients but also can be used for real-time monitoring of various other ailments, such as lung, brain, and cardiac diseases in future.

A Low-Frequency Fiber Bragg Grating Acceleration Sensor Based on Spring Support and Symmetric Compensation Structure with Flexible Hinges

To measure vibration signals, a low-frequency fiber Bragg grating (FBG) acceleration sensor featuring a flexible hinge with a spring support and symmetric compensation structure has been designed. Based on the mechanical model of the sensor’s structure, the expressions for sensitivity and resonant frequency of the sensor are derived. The structural parameters of the sensor are optimized, and a simulation analysis is conducted using ANSYS 19.2 software. According to the results of simulation analysis and size optimization, the sensor prototype is constructed. Subsequently, its amplitude-frequency response, sensitivity, and temperature characteristics are investigated through vibration experiments. The experimental results show that the resonant frequency of the sensor is 73 Hz, the operating frequency range is 0~60 Hz, and the sensitivity measures 24.24 pm/g. This design meets the requirements for measuring vibration signals at low frequencies.

1.7 W holmium-doped fluoroindate fiber laser at 3920 nm.

A monolithic fiber laser emitting 1.7 W at 3920 nm is experimentally demonstrated in a Ho3+:InF3 fiber. The cavity comprises a pair of highly reflective fiber Bragg gratings written in the active fiber with the femtosecond phase-mask scanning technique and is spliced to the pump diode with a robust silica-to-fluoride fiber splice. This work is an important step toward high-power all-fiber laser operating in the vicinity of 4 µm.

Deep learning-assisted structural health monitoring: acoustic emission analysis and domain adaptation with intelligent fiber optic signal processing

Abstract The Acoustic Emission (AE) technique is a well-established method for detecting and locating cracks as they occur. One of the key challenges in fracture mechanics is determining the cracking levels during crack propagation. By linking the AE signature with crack geometry, we can determine the stages of crack growth. The classification of cracking levels is established by correlating micro and macro crack damage to the stable and unstable propagation stages. In this paper, a deep learning architecture based on Convolutional Neural Network is proposed to automatically extract features from the AE signal and classify cracking levels. The performance of this Deep Learning (DL) approach is evaluated using a simulated and experimental Hsu-Nielsen Pencil-led break test conducted in Finite Element Modeling and laboratory setup via COMSOL and a novel High-finesse Fiber Bragg Gratings Fabry-Perot Interferometer sensing system respectively. The results demonstrate the effectiveness of the DL approach for cracking level identification with high accuracy. The dataset was artificially augmented, and a comparison was made between balanced and imbalanced datasets for training purposes. In addition to gaining a deeper understanding of the fracture process, a finite element model was created to differentiate between active and passive AE sources by simulating the Pencil-led break test and crack propagation under cyclic loading conditions respectively. The analysis of the simulation model reveals that the energy associated with AE hits, as calculated from fracture mechanics, increases. This is the primary distinction between active and passive AE sources.

Multi-order orbital angular momentum mode generators based on integrated long period fiber gratings

Multi-order orbital angular momentum mode generators based on integrated long period fiber gratings

Femtosecond laser direct writing large-area fiber Bragg grating based on diaphragm shaping

We propose and demonstrate a new method of direct writing large-area fiber Bragg grating by femtosecond laser through the coating. By adding an adjustable diaphragm before the focusing objective, we can precisely control the length of the refractive index modulation line along the femtosecond laser incident direction up to 29.1 µm. In combination with femtosecond laser scanning fabrication technology, a uniform refractive index modulation plane can be inscribed in the fiber in a single scanning. Based on the plane-by-plane inscription method, we have fabricated a high-quality high-reflectivity fiber Bragg grating and a chirped fiber Bragg grating on 20/400 double-clad fiber core. The reflectivity of both gratings is greater than 99%, and the insertion loss is as low as 0.165 dB and 0.162 dB, respectively. The thermal slope of chirped fiber Bragg grating without any refrigeration is 0.088 °C/W and there is no obvious temperature increase when using the water cooling. Therefore, the fabrication method of large-area fiber Bragg grating based on diaphragm shaping can efficiently fabricate high-quality fiber Bragg grating in the large core diameter fiber, which has an important application prospect in high-power all-fiber oscillators, especially all-fiber oscillators in special wavebands.

Full C- and L-band covered second-order OAM mode generator based on a thinned helical long-period fiber grating

A full C- and L-band covered second-order orbital-angular-momentum (OAM) mode generator has been proposed and experimentally demonstrated, which is realized by using a helical long-period fiber grating (HLPG) but inscribed in a thinned four-mode fiber. By optimizing the design of grating period and fiber diameter of the proposed HLPG, an ultra-broadband rejection filter with a depth of ∼23 dB, a bandwidth of ∼156 nm @-10 dB (ranging from 1522 nm to 1678 nm) and a bandwidth of ∼58 nm @-20 dB (ranging from 1574 nm to 1632 nm), has been successfully obtained as a typical sample. To the best of our knowledge, this is the first demonstration of such ultra-broadband second-order OAM mode generator by using only one fiber component, i.e., the thinned HLPG. In addition, the proposed generator is less polarization-dependent and less temperature-sensitive than those of the conventional HLPGs, which is believed to be considerably helpful to find potential applications of the device itself in wavelength division multiplexing (WDM) and OAM mode division multiplexing (MDM) optical fiber communication systems.

Customized femtosecond laser-inscribed superstructure fiber Bragg grating: A novel approach to decoupling temperature and strain.

This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure fiber Bragg grating (SFBG). This SFBG enables improved spectral capabilities, resulting in side-resonances within the optical spectrum. The characteristics of the device depend on three key factors: the length of the SFBG, the inscribed FBG’s periodic perturbations, and the length of the uninscribed sections that compose the entire structure. Initially, mathematical expressions were derived to calculate the separation between the central peak and a resonance on each side, which plays a crucial role in determining the sensor’s response. Then, a series of complete simulations using OptiGrating software, and a theoretical analysis were performed to comprehend the functioning of this superstructure. Subsequently, the fabrication process employed a femtosecond laser following a point-by-point inscription. Finally obtaining a comprehensive study on the principle, design, simulation, and implementation of the proposed SFBG. The sensitivities of the central Bragg wavelength and the distance between central peak and first-order resonance when applying temperature and strain were calibrated. The results yielded sensitivities for the central Bragg peak of 10.58 pm/°C and 1.1598 pm/µɛ, while the peak-to-resonance distance had sensitivities of 0.3495 pm/°C and 0.03052 pm/µɛ. The different response of both magnitudes makes it possible to distinguish the contributions of strain and temperature within short distances, having the possibility to improve measurements in sensing applications. This study finally provides a critical insight into the design process, as it aligns with the theoretical expectations.

Optical fiber fronthaul segment in open radio access 5G networks: enhanced performance utilizing AFBG

In open Radio access network (oRAN) 5G networks, a fronthaul segment between virtual Distribution unit (vDU) edge cloud and other external Remote radio units (RRUs) sites is very important to transmit high data rate to achieve 5G requirements. Performance parameters such as Quality factor (Q-factor) and Bit error rate (BER) of an optical fiber fronthaul segment are the main important parameters to enhance latency and bit rate. An Apodized fiber bragg grating (AFBG) is utilized with different apodization profiles to optimize linewidth of an optical signal leading to enhance performance. The designed AFBG is used with a data rate of 25 Gb/s optical Ethernet module at the vDU edge cloud to optimize the linewidth of the optical signal between the vDU and the RRU in the fronthaul optical fiber segment. The AFBG is investigated at different connections pre, post, and symmetrical connections, where different apodization functions are used in the AFBG design. It is found that the best results for the maximum Q-factor and minimum BER are 9.2 and 2.72e− 21, respectively, obtained from uniform function in the symmetrical connection. Finally, the proposed model linewidth is 0.408 nm, which is better than 1.56 nm that is evaluated by related work.

An FBG-based optical pressure sensor for the measurement of radial artery pulse pressure.

One of the diagnostic tool for clinical evaluation and disease diagnosis is a pulse waveform analysis. High fidelity radial artery pulse waveforms have been investigated in clinical research to compute central aortic pressure, which has been demonstrated to be predictive of cardiovascular diseases. The radial artery must be inspected from several angles in order to obtain the best pulse waveform for estimate and diagnosis. In this study, we present the design and experimental testing of an optical sensor based on Fiber Bragg Gratings (FBG). A 3D printed device along with the FBG is used to measure the radial artery pulses. The proposed sensor is used for the purpose of quantifying the radial artery pulse waveform across major pulse position point. The suggested optical sensing system can measure the pulse signal with good accuracy. The main characteristic parameters of the pulse can then be retrieved from the processed signal for their use in clinical applications. By conducting experiments under the direction of medical experts, the pulse signals are measured. In order to experimentally validate the sensor, we used it to detect the pulse waveforms at Guan position of the wrist's radial artery in accordance with the diagnostic standards. The findings show that combining optical technologies for physiological monitoring and radial artery pulse waveform monitoring using FBG in clinical applications are highly feasible.

Temperature field reconstruction based on femtosecond laser prepared of multiwavelength fibre bragg grating array

Temperature field measurements are of great significance in industrial production, scientific research, and other fields. Contact temperature measurements usually achieve high spatial resolution by increasing the layout density of the sensors. However, in practical applications, achieving high-density sensor placement is often difficult. Therefore, when the number of sensors is limited, it is necessary to perform function fitting or interpolation of the temperature of the sampling points to reconstruct the temperature field distribution. This study proposed a temperature field reconstruction method based on femtosecond laser prepared multiwavelength fibre Bragg grating (FBG) array. A multiwavelength FBG array was prepared using the femtosecond laser phase mask method combined with stress stretching, and applied for measuring the temperature field distribution in a tubular high-temperature furnace. Cubic spline interpolation and backpropagation (BP) neural networks were used to construct two-dimensional temperature field models for the temperature field distribution data measured by the FBGs, and the prediction accuracies of the two models were compared. The test results show that the root mean square error of the temperature field distribution constructed using the BP neural network is 0.7333 °C, which is approximately 23.18% of the predicted results of the cubic spline interpolation model, indicating that it is a high-precision temperature field reconstruction method.

Performance Analysis of Gaussian Apodized Fiber Bragg Grating (GA-FBG) Dispersion Compensator for a Long Haul Optical Fiber Link

This examination gives a complete analysis of the GA-FBG, a generally involved grating for dispersion compensation across a 150 kilometer optical link, from each point. The essential objective of this study is to distinguish how long the GA-FBG can work as an independent dissemination reimbursement gadget and how well it acts in various compensation settings. In this review, the GA-FBG is utilized as an option in contrast to the exorbitant Dispersion-Reimbursing Fiber inside the association to give a more safe optical link. The investigation delves into three specific compensation methods and studies the GA-FBG grating boundaries in light of the relative abundance of real imperatives associated with a Fiber Bragg Grating (FBG) in the design phase. Using a Piece Blunder Rate analyzer to examine the streamlined links' exhibition highlights allows us to evaluate their productivity. Results show that the GA-FBG exhibits a common dispersion compensation adequacy when the link's channel boundaries are tuned. Using gearbox over distances easily exceeding 500 km, the balanced compensation strategy delivers a remarkable Q-factor respect. Utilizing OptiSystem programming, we validate the proposed system's functional viability. The results of our study indicate that the GA-FBG is capable of efficiently counteracting dispersion, leading to an optical link that is both more economical and effective, with significant potential for extended transmission ranges.

Improved optical contrast of plasmonic phase change memory using a Fabry-Perot cavity

As a promising technology to realize multilevel, non-volatile data storage and information processing, optical phase change technologies have attracted extensive attention in recent years. However, existing phase-change photonic devices face significant challenges such as limited switching contrast and high switching energy. This study introduces an innovative approach to tackle these issues by leveraging Fabry-Perot (F-P) cavity resonance and plasmon resonance techniques to enhance the modulation effect of phase change materials (PCMs) on the light. To the best of our knowledge, a novel device structure is proposed, featuring an elliptic nano-antenna placed on an F-P cavity waveguide composed of symmetric Bragg grating. This design exploits the enhanced electric field to achieve low power consumption and high contrast. The device enables crucial functions, including read, write, and erase operations, under all light conditions. Through the synergistic utilization of plasma and F-P cavity effects, an ultra-high switching contrast of around 70.6% is achieved. By varying the pulse power or duration, the proportion between the crystalline and amorphous states of the PCMs is altered, consequently modifying its refractive index. With its wide range of applications in optical storage and computing, the device holds significant potential for advancing these fields.