Boron Sprays Research Articles

Global mRNA profiling reveals the effect of boron as a crop protection tool against Sclerotinia sclerotiorum.

Sclerotinia sclerotiorum, the causal agent of white mould, is a necrotrophic fungal pathogen responsible for extensive crop loss. Current control options rely heavily on the application of chemical fungicides that are becoming less effective and may lead to the development of fungal resistance. In the current study, we used a foliar application of boron to protect Brassica napus (canola) from S. sclerotiorum infection using whole-plant infection assays. Application of boron to aerial surfaces of the canola plant reduced the number of S. sclerotiorum-forming lesions by 87 % compared to an untreated control. Dual RNA sequencing revealed the effect of boron on both the host plant and fungal pathogen during the infection process. Differential gene expression analysis and gene ontology term enrichment further revealed the mode of action of a foliar boron spray at the mRNA level. A single foliar application of boron primed the plant defence response through the induction of genes associated with systemic acquired resistance while an application of boron followed by S. sclerotiorum infection-induced genes associated with defence response-related cellular signalling cascades. Additionally, in S. sclerotiorum inoculated on boron-treated B. napus, we uncovered gene activity in response to salicylic acid breakdown, consistent with salicylic acid-dependent systemic acquired resistance induction within the host plant. Taken together, this study demonstrates that a foliar application of boron results in priming of the B. napus plant defence response, likely through systemic acquired resistance, thereby contributing to increased tolerance to S. sclerotiorum infection.

Guava ripening and quality in response to pre-harvest boron spraying

The physiological process of guava fruit ripening is difficult to manage in orchards. Boron (B) is a nutritional element with a physiological effect on fruit ripening through its role in ascorbate metabolism. This study evaluated the effects of single boron pre-harvest spraying on fruit ripening and post-harvest. The treatments consisted of B-monoethanolamine (MEA) sprays (11% B) at concentrations of 0 (control), 1, 2, and 3ml L-1. Foliar sprays were applied on guava trees cv. Cortibel RG, at the physiological stage Biologische Bundesanstalt, Bundessortenamt, und Chemische Industrie (BBCH) 78 (fruits at 80% of final growth). The study used a randomized block design with five replicates. Fruits were harvested 5, 8, 15, and 17 days after B-MEA spraying. The nutritional content was assessed in the leaves and fruits. The fruits were analyzed for ascorbic acid content (AA), total sugars, reducing and non-reducing sugars, titratable acidity, soluble solids, ripeness index, total phenolic compounds, total carotenoids and total anthocyanins. Moreover, the fruit weight, length and diameter were measured and yield were assessed. Fruit firmness and mass loss were evaluated post-harvest. The data showed an increase in ascorbic acid content in the fruit in all treatments with B-MEA sprays. Spraying B-MEA 3 ml L-1, or 180.84 g ha-1, increased the earliness and standardization of ripening, which took place over a shorter period of time, maintaining firmness and reducing post-harvest fruit mass loss.

Interactive Effects of Boron and Molybdenum on Nodulation, Growth and Yield of Cowpea under South Gujarat Condition

Background: Cowpea seeds are nutritious component of human diet and being a legume crop, it also improves the soil fertility by increasing the amount of nitrogen in the soil through symbiotic nitrogen fixation. To study the effect of boron and molybdenum on nodulation, growth and yield of cowpea the field experiment was conducted at the Regional Horticultural Research Station, Navsari Agricultural University, Navsari, Gujarat, India, during summer season of 2019 and 2021. Methods: The experiment was carried out in a factorial randomized block design with 3 replications. Factor-1 consisted of four levels of seed treatments with molybdenum at 2 mg/l (M1), 4 mg/l (M2), 6 mg/l (M3) for 24 hours prior to sowing including control (M0), where as the second factor was consisted of four levels of boron (B) spray at 2 mg/l (B1), 4 mg/l (B2), 6 mg/l (B3) and control at 30 DAS, 45 DAS and 60 DAS with control. Boron was applied in the form of Boric acid and Molybdenum as ammonium molybdate. Result: The treatment combination of seed treatment of molybdenum @ 2 mg/ l with foliar spray of boron @ 4 mg/ l at 30, 45 and 60 DAS (M1B2) has significantly influenced yield parameters and registered maximum number of clusters per plant (6.50), green pod yield per plant (0.153 kg), green pod yield per net plot (3.98 kg), green pod yield per hectare (12.27 tonne). Seed treatment with different levels of molybdenum has significantly influenced nodulation in cowpea and recorded maximum number of nodules per plant (31.69 at final harvest) and fresh nodule weight (0.230 g/plant) in seed treatment of molybdenum @ 2 mg/ l (M2) among all the treatments at final harvest during all the years of study, including pooled analysis.

Influence of Pre-harvest Application of NAA, Ca, and B on Fruit Drop, and Yield of Thailand Ber (Ziziphus mauritiana)

The present study was carried out to investigate the beneficial effects of the pre-harvest spray of NAA, calcium, and boron on fruit drop and yield of Thailand ber (Ziziphus mauritiana) at the Experimental Farm, Department of Horticulture, AAU, Jorhat-13 during 2022-2023. The treatment T4 i.e. spraying with NAA @ 20 ppm + B @ 0.5% resulted in maximum fruit set (4.68%), lesser fruit drop (53.28%), the highest yield per tree (18.12 kg/tree), yield per hectare (24.16 t), the maximum thickness of pulp (1.94 mm) and pulp weight (62.25 g). Spraying of NAA 20 ppm in combination with Boron 5% is the most profitable approach for minimizing fruit drop and maximizing production.

Foliar applications of zinc oxide nanoparticles and boric acid affect leaf oxidative metabolism and productivity in young pecan trees

Zinc and boron are nutrients that often suffer low bioavailability to pecan trees grown in calcareous soils whereas adequate supplies of these two elements is essential for commercial pecan production. Working with young pecan trees, we evaluated changes in oxidative metabolism, levels of bioactive compounds, yield components and foliar nutrient concentrations in response to foliar sprays (50 or 100 mg L−1) of zinc oxide nanoparticles (ZnO NPs) and boron (H3BO3). Four different treatment solutions were applied in a completely randomised design with six replications per treatment (24 trees in total). Zinc and B treatments were applied before pistil receptivity (3 weeks before anthesis) and at stem elongation stage 31, 39/60; flowering stage 69; fruit stages 7–75 and continued for a total of five applications at 14-day intervals. We evaluated enzyme activities (SOD, H2O2, CAT and GPx), AC, phenols, flavonoids, leaf area, chlorophyll, total anthocyanins and nut yield and quality (nut weight and % kernel). The mineral concentrations in the leaflets were also determined. The mineral concentrations (N, P, K, Ca, Mg, Fe, Cu, Mn, Ni, Zn and B) in the leaflets were also determined. Spraying ZnO NPs and B increased SOD activity, CA, chlorophyll concentration, mineral nutrients (N, K, Ca, Zn and B) and yield. However, reductions were observed for CAT activity, nut quality and concentrations of phenol, flavonoid, anthocyanin and Fe. Boron increased GPx activity and P concentration. These results demonstrate that spraying low doses (50 mg L−1) of ZnO NPs and B can help reduce oxidative stress and increase yield, nut quality and leaf concentrations of Zn and B in young cv. Wichita pecan trees established on a calcareous soil.

Effect of Bio Fertilization and Boron Spraying on Growth and Green Pod Yield of Three Broad Bean (Vicia faba L.)

Effect of Bio Fertilization and Boron Spraying on Growth and Green Pod Yield of Three Broad Bean (Vicia faba L.)

The Influence of Biological and Organic Fertilization and Boron Spraying in Some Soil Characteristics

The Influence of Biological and Organic Fertilization and Boron Spraying in Some Soil Characteristics

Response of Olive Trees (Olea europaea L.) cv. Zaity to Bio health and Foliar Spray of Tecamin max and Boron

During the growing season of 2022, the experiment was conducted in one of the private orchards located in Hassan ava village, Zakho district, Dohuk governorate, Kurdistan region, Iraq, to study the response of olive tree (Olea europaea L.) cv. Zaity to biofertilizer (bio health) and foliar spray of the amino acid (tecamin max) and Boron. Olive trees were planted 6 x 6 m apart on clay sandy loam soil and fed with well water using a drip irrigation system. Olive trees were treated with three levels of biofertilizer (bio health) at (0, 1,0 and 15 g.L-1), added to the soil, and three levels of the foliar spray with amino acid (tecamin max) at (0, 10, 15 ml.L-1), and three levels (0, 200 and 300 mg. L-1) of boron foliar spray. A factorial experiment with three replications was carried out in a randomized complete block design (RCBD), using one tree for each experimental unit. The study reached the following results: application of biofertilizer (bio health) in the soil, especially at 15 g.L-1, and foliar spraying of the amino acid (tecamin max) at 15 ml.L-1 led to a significant increase in all studied characters (leaves mineral content N, P, K, and B%) and physical characters of fruit (fruit weight, fruit length, fruit width and total yield per tree) except pulp: stone ratio, while the control treatment gave the lowest average for the aforementioned traits. Foliar spray of boron especially the level of 300 mg. L-1, led to a significant increase in all the studied characteristics (leaves mineral content N, K, and B%) and physical characters of fruit (fruit weight, fruit length, fruit width, and total yield per tree) except pulp: stone ratio and phosphorus content in leaves, while the comparison treatment gave the lowest average for the aforementioned traits. There was also a significant increase in the binary and triple interactions of the study treatments on all the studied traits, especially the high levels of the study factors (15 g.L-1 bio-health, 15 ml.L-1 tecamin max, and 300 mg. L-1 boron).

The combined effects of farm yard manure and boron application on growth, and oil quality of Canola grown under newly reclaimed soils

Two field experiments were conducted during the main seasons of 2021/2022 ​at the Research and Production Station of National Research Centre in Egypt to investigate the effects of farmyard manure (FYM) and boron on Canola growth, yield, oil yield, and quality. The results unequivocally demonstrated that the combined application of FYM at a rate of 14.4 ​ton ​ha−1 with a foliar spray of boron at 100 ppm positively influenced plant characteristics, leading to enhanced growth rates and higher yields compared to the control group. Moreover, this integrated approach significantly improved nutrient content by enhancing levels of oil content, carbohydrates, proteins, phenolics, flavonoids, and total soluble sugars. These findings provide compelling evidence that utilizing farm manure along with boron can effectively enhance Canola properties in newly reclaimed soils while promoting sustainable agricultural practices.

Effect of salinity stress and surfactant treatment with zinc and boron on morpho-physiological and biochemical indices of fenugreek (Trigonella foenum-graecum)

Micronutrient application has a crucial role in mitigating salinity stress in crop plants. This study was carried out to investigate the effect of zinc (Zn) and boron (B) as foliar applications on fenugreek growth and physiology under salt stress (0 and 120 mM). After 35 days of salt treatments, three levels of zinc (0, 50, and 100 ppm) and two levels of boron (0 and 2 ppm) were applied as a foliar application. Salinity significantly reduced root length (72.7%) and shoot length (33.9%), plant height (36%), leaf area (37%), root fresh weight (48%) and shoot fresh weight (75%), root dry weight (80%) and shoot dry weight (67%), photosynthetic pigments (78%), number of branches (50%), and seeds per pod (56%). Fenugreek’s growth and physiology were improved by foliar spray of zinc and boron, which increased the length of the shoot (6%) and root length (2%), fresh root weight (18%), and dry root weight (8%), and chlorophyll a (1%), chlorophyll b (25%), total soluble protein content (3%), shoot calcium (9%) and potassium (5%) contents by significantly decreasing sodium ion (11%) content. Moreover, 100 ppm of Zn and 2 ppm of B enhanced the growth and physiology of fenugreek by reducing the effect of salt stress. Overall, boron and zinc foliar spray is suggested for improvement in fenugreek growth under salinity stress.

Influence of Drip Fertigation and Foliar Spray of Boron on Yield and Nutrient Uptake by Cucumber cv. Himangi

The effect of fertigation and foliar application of boron on yield, uptake of nutrients and nutrient use efficiency by cucumber Cv. Himangi was studied during two consecutive years 2018-19 and 2019-20. An experiment was carried out in open field conditions with five fertigation levels viz., 100 % RDF through soil, 120 %, 100 %, 80 % and 60 % RDF through fertigation in ten equal splits at 10 days interval along with three levels of foliar application of boron viz. 0.0, 0.1, and 0.2 per cent concentration at 30, 45 and 60 DAS to determine suitable fertigation and foliar spray of boron dose for cucumber cultivation. The experiment was consisting of fifteen treatment combinations of recommended doses of water soluble fertilizers, comprising of five levels of fertigation. The results indicated that, yield, nutrient uptake and nutrient use efficiency of nitrogen, phosphorus and potassium under study were significantly influenced by various fertigation and boron levels. On the basis of pooled data, it was observed that, among various treatment combinations, minimum male : female sex ratio (1:4), maximum average weight of fruit (239.88 g), yield per vine ( 2.44 kg), yield ( 228.37 q/ha), uptake of nitrogen by shoot, ( 13.03 kg/ha), ( 81.62 kg/ha) by fruit and (94.01 kg/ha) by whole cucumber vine, maximum uptake of phosphorus by shoot (3.62 kg/ha), (21.52 kg/ha) by fruit and ( 25.13 kg/ha) by whole cucumber vine and the maximum uptake of potassium by shoot ( 14.05 kg/ha), by fruit (101.45 kg/ha) and ( 115.20 kg/ha) by whole cucumber vine, B:C ratio (2.99) and minimum (27.73, 25.71 and 17.2, 16.85 and 55.28, 50.28 %, respectively) nutrient use efficiency of NPK were recorded with the application of 120 % RDF through fertigation due to nutrient losses through leaching, devolatilization. While, maximum (36.70, 34.70 and 25.38, 21.90 and 65.81, 63.43 respectively) nutrient use efficiency of NPK was recorded with the application of 60 % RDF through fertigation. The maximum (22.59, 20.61 and 6.99, 7.70 and 27.30, 30.47 %, respectively) nutrient use efficiency with foliar application of boron at concentration of 0.2 per cent and minimum (3.60, 3.44 and 0.56, 0.52 and 3.72, 4.05 %, respectively) nutrient use efficiency with foliar application of boron at concentration of 0.1 per cent.

Effect of pre-flowering sprays of micronutrients on flowering, fruit set, fruit drop and yield of mango cv. Amrapali ​

Being the national fruit of India, mango possess a significant position in its history, tradition culture and economy. This delicious and nutritious fruit contains considerable amounts of vitamins, minerals, and antioxidants in abundance. The plant flowers in panicle at the end of winter and fruit drop is a common problem which is manifested due to several causes and micronutrient deficiency is one of major cause. The present study was conducted at the instructional farm of Institute of Agriculture, Visva Bharati, Sriniketan which comes under humid sub-tropical region of West Bengal, India during the year 2020 and 2021 to study the effect of pre-flowering sprays of zinc and boron on panicle emergence and panicle growth of mango cv. Amrapali. The experiment comprised of 9 treatment combinations of pre flowering sprays of zinc sulphate (ZnSO4, 7H2O) and borax (Na2B4O7, 10H2O) replicated 3 times as T1: Control (distilled water), T2: ZnSO4 @ 0.5%, T3: ZnSO4 @ 1.0%, T4: Borax @ 0.5%, T5: Borax @ 1.0%, T6: ZnSO4 @ 0.5% + Borax @ 0.5%, T7: ZnSO4 @ 0.5% + Borax @1.0%, T8: ZnSO4 @ 1.0% + Borax @ 0.5% and T9: ZnSO4 @ 1.0% + Borax @ 1.0%in Randomized Block Design (RBD). Highest number of total flowers and hermaphrodite flowers per panicle were recorded under ZnSO4 @ 1.0% + Borax @ 1.0% spray (T9). Apart from these, higher percentage of fruit set and lower fruit drop in all the stages have also been observed ZnSO4 @ 1.0% with Borax @ 1.0% treatment (T9). Same treatment also exhibited maximum yield in both the years. Thus, foliar application of ZnSO4 @ 1.0% and Borax @ 1.0% can be used at pre-flowering stage in mango (cv. Amrapali) for good flowering, high fruit set and less fruit drop.

Effect of foliar spray of boron and zinc on flowering, fruit set and quality of olive (Olea europaea L.)

Effect of foliar spray of boron and zinc on flowering, fruit set and quality of olive (Olea europaea L.)

Influence of Foliar Application of Boron on the Growth, Yield and Quality of Sesame (cv. BARI Til-4)

Foliar supplementation may be useful for boron to a crop when its demands are higher compared to the supply from soil. Boron is an important micronutrient which had a substantial impact on oil content, seed yield, and the components of the sesame yield. A field investigation was implemented to determine the impact of foliar application of boron on seed yield, growth and oil content of sesame cv. BARI Til-4. The investigation included four concentrations of boron viz. 0, 25, 50, and 75 ppm and three frequencies of boron application viz. one time at 30 days after sowing (DAS), two times at 30 and 50 DAS, and three times at 30, 50, and 70 DAS. The experiment was conducted following randomized complete block design, which was replicated thrice. At the vegetative stage, the highest plant height (107.3 cm), branches/plant (5.0) and shoot dry weight (45.20 g/plant) resulted in 75 ppm boron spray at 30, 50 and 70 DAS. However, the highest root dry weight (5.80 g/plant) was recorded in 75 ppm with one application of boron at 30 DAS. The plants with the highest plant height (112.1 cm), branches/plant (5.13), pods/plant (44.13), seeds/pod (54.33), seed yield (609.0 kg/ha), harvest index (30.65%), and oil content (42.33%) were also observed with the combination of 75 ppm boron spray with thrice application at 30, 50 and 70 DAS. The lowest seed yield (368.7 kg/ha) resulted in without boron application. Therefore, it can be inferred that the most efficient method for increasing the sesame seed yield and oil content is thrice (30, 50, and 70 DAS) foliar spraying of 75 ppm boron.

The Effect of Nano and Metallic Boron Spray on some Growth Traits of Sweet Corn under Water Stress Conditions

Under conditions of water stress, a field experiment was carried out to investigate the effect of spraying with nano and metal boron on certain vegetative development parameters of the sweet crop (Zea mays L. Var saccharata) in the fall seasons of 2021 and 2022. The experiment was designed to evaluate the effect of spraying with nano and metal boron. A split-plot R.C.B.D. with three replications was used to design the experiment. W1, W2, and W3 represented 40%, 60%, and 80% water depletion in the major plots. The sub-plots were treated with two concentrations of boron nano particles (5 and 10 mg L-1) designated N1 and N2, two concentrations of metal boron (20 and 40 mg L-1) denoted M1 and M2, and a control treatment of spraying distilled water only. The number of days from planting to 75% tasseling, plant height, leaf number, leaf area, leaf area index, plant dry weight, and crop growth rate for both seasons did not differ between 40% and 60% water stress. 80% water stress decreased all trait averages. Nano and metallic boron spraying significantly affected most features. Spraying with 5 mg L-1 nano-boron concentration reduced the number of days from planting to 75% tasseling by 46.89 and 47.11 days, as well as plant height (141.36 and 142.10 cm), leaf number (13.40 and 13.51 leaves plant-1), plant dry weight (165.80 and 165.93 g plant-1), and crop growth rate (3.53 and 3.51 g m2 day-1 ) for both seasons. However, spraying with 10 mg L-1 nano-boron concentration produced the largest average leaf area (4507.90 and 4530.80 cm2 plant-1) and leaf area index (2.40 and 2.41, respectively) compared to the control treatment for both seasons. For both seasons, Water stress and nano/mineral boron spraying influenced plant height, leaf area, leaf area index, and dry weight. In cases of restricted irrigation water, we propose watering when the available water is 60% drained and spraying with nano boron at 5 mg L-1 to improve the plant’s performance in most of the sweet corn crop’s development features.

Influence of foliar application of boron, iron and magnesium on quality attributes and leaf nutrient status of guava cv. Hisar Surkha

Foliar application of nutrients escalates efficient use of nutrients along with quick response. An experiment was undertaken to study the effect of foliar application of mineral nutrients viz., boron (B), magnesium (Mg) and iron (Fe) sprayed at different growth stages viz., at fruit set and one month after first spray at the experimental orchard of Chaudhary Charan Singh Haryana Agricultural University, Hisar, Haryana during year 2020–21 and 2021–2022. The experiment was conducted in a Randomized Block Design with 21 treatments and 3 replications with a spacing of 6 × 6 m. Foliar sprays with boron, magnesium and iron significantly affected the physio-chemical properties of the fruits. Total soluble solids, TSS acidity ratio, ascorbic acid, total sugar, reducing sugar, non-reducing sugar and pectin content were found to be maximum under the treatment T21 [FeSO4 (0.5%) + H3BO3 (0.5%) + MgSO4 (0.5%)] while in case of titratable acidity was found significantly lowest under the treatment T21 [FeSO4 (0.5%) + H3BO3 (0.5%) + MgSO4 (0.5%)]. Treatments also affected the leaf chlorophyll content and leaf nutrient status significantly. It can be concluded from this study that foliar sprays of boron, magnesium and iron are beneficial for improving fruit quality, leaf chlorophyll content and leaf nutrient status of guava cv. Hisar Surkha. Further, 0.5 per cent each of FeSO4, H3BO3 and MgSO4 foliar sprays two times at one month’s interval can obtain the best results in terms of quality of fruits.

ROLE OF NANO AND METALLIC BORON FOLIAR NUTRITION ON WATER STRESS REDUCING IN SWEET CORN YIELD AND ITS COMPONENTS

A field experiment was conducted in the experimental field of the Crop Sciences Department at the College of Agricultural Engineering Sciences - University of Baghdad during fall seasons of 2021 and 2022. The aim of this study was to investigate the role of nano and metallic boron foliar nutrition on yield, components, water use efficiency, and water consumption under water stress for sweet corn (Zea mays L.). Randomized Complete Block Design was used within split -plot arrangement with three replicates, where the main plots included three levels of water stress (irrigation at 40, 60, and 80% of available water) coded as W1, W2, and W3, respectively. The nano and metallic boron spray concentrations represented 5, 10, 20, and 40 mg L-1 coded as N1, N2, M1, and M2, respectively. Results showed that nano and metallic boron concentrations significantly affected all the studied traits. The concentration of 5 mg L-1 of nano boron N1 significantly exceeded other concentrations under study in increasing ear length, number of rows per ear, number of grains per row, and weight of 500 grains, which positively reflected on improving grain yield of 5.93 and 5.96 t ha-1. The interaction between water stress treatments and nano and metallic boron concentrations was significant for all the studied traits except for ear length.

Optimizing Nutrient Management Practices for Cauliflower in Hill Zone of West Bengal: An Integrated Approach

A set of experiments was conducted at Hill Zone of West Bengal, Kalimpong for two seasons (2019 & 2020) to standardize integrated nutrient management for optimum growth and yield of cauliflower. Different organic nutrient sources, such as farm yard manure (FYM), poultry manure (PM), and vermicompost (VC), were used to partially replace the recommended dose of chemical fertilizer. The treatments we used were as follows: T1= N120 P60 K60 (RDF), T2= 75% RDF+25% N through FYM (FYM@ 6 t ha-1), T3= 75% RDF+25% N through VC (VC@ 2 t ha-1), T4= 75% RDF+25% N through (PM@ 1.25 t ha-1), T5= 75% RDF+25% N through FYM + Foliar spray of B, T6= 75% RDF+25% N through FYM + Soil application of B, T7= 75% RDF+25% N through VC + Foliar spray of B, T8= 75% RDF+25% N through VC + Soil application of B, T9= 75% RDF+25% N through PM + Foliar spray of B, T10= 75% RDF+25% N through PM + Soil application of B. The treatments were set up in a randomized block design with three replication. The treatments had a significant (P<0.05) effect on cauliflower yield and soil-available macro and micronutrients due to integrated nutrient management. The maximum plant height (45.9 cm), curd wt. plant-1 (537.2 g), stalk wt. plant-1 (227.3 g), and curd yield (162.1q ha-1) was achieved with T9 treatment i.e 75% RDF+25% N through PM + Foliar spray of B. Therefore, application of 75 percent of RDF and 1.25 t ha-1 poultry manure along with foliar spray of boron at 25 and 40 days after transplanting is recommended.

Effect of Potassium Humate and Spraying With Boron on the Yield and Its Components of Sesame Crop

The impact of ground addition of potassium humate and boron spraying on sesame indicators, yield, and its components was investigated in a field experiment at the Research Station of the Field Crops Department of the College of Agriculture - Tikrit University 2021. The experiment was carried out using a randomized complete block design (RCBD) using a factorial experiment consisting of two components, the first of which was the addition of potassium humate and the second of which was the spraying of boron. During the first week of June 2021, seeds were planted in soil that had been amended with potassium humate at five different concentrations: 0, 3.6, 7.2, 10.8, and 14.4 g.l-1. A randomized full block design was used to statistically assess the data gathered from spraying three different amounts of boron (0, 100, and 200) g.l-1 prior to the onset of flowering. Here is a rundown of the findings: The number of capsules per plant treated with potassium humate (H3) was the highest (89.111 capsule.plant-1), and the total yield was also much higher (compared to other treatments) (3.427 kg.ha-1). Both the capsule length (2.573 cm) and the individual yield (15.673 g) were significantly higher in plants that were subjected to a boron (B3) spraying treatment. For the features of the number of seeds per capsule (71,333 seeds.capsule-1) and the weight of one thousand seeds, the interaction combination (H5B3) yielded the greatest significant value (4.491 g).

Effect of Tillage Systems and Foliar Boron Application on Growth and Yield of Soft Wheat (Triticum aestivum L.)

A field experiment was carried out in the Um Al-Akf region,(5 km from the center of Al-Muthanna Governorate), in the season (2021-2022), with the aim of studying the effect of tillage systems and foliar spraying of boron on the growth and yield characteristics of soft wheat. The experiment was carried out according to the Split Block Design method, using sector design. Completely randomized (RCBD) and with three replications, the experiment included two factors, the first factor was the tillage systems (no-till and Reduce tillage at a depth of (10 cm) and conventional tillage at a depth of (20 cm) and operated in the vertical position, and the second factor was spraying boron element (0, 50, 100, 150 mg B L-1), and operated in the horizontal position. The results of the experiment showed the superiority of the no-till system significantly, as the highest averages were recorded in the characteristic of plant height 79.66 cm, leaf area 38.84 cm2, the number of spikes 276.8 spikes m-2, the grain yield 3.540 ton ha-1, and the biological yield 8.285 ton ha-1, As for the spraying of boron, the concentration of 150 mg B L-1 was significantly superior, as it recorded the highest averages for the characteristic of the weight of a thousand grains 36.30 g, the grain yield 3.498 ton ha-1, and the biological yield 8.713 ton ha-1, while the interaction between tillage and boron spraying systems showed superiority Significant in the weight of 1000 grains, as the treatment of interference (Reduce Tillage × 100 mg B L-1) recorded the highest average weight per thousand tablets was 38.03 g.