Bone Tamp Research Articles

Arthroscopic-Controlled Reduction of Hill-Sachs Lesions: Treatment Option for Off-Track Lesions in Young Patients?

Large Hill-Sachs lesions (HSL) are currently treated via a remplissage procedure. Although the good stabilizing properties of this surgery are apparent, there are some disadvantages in terms of the functional outcome. In the following Technical Note, we present a method of arthroscopic-controlled reduction of HSL for anatomical restoration of the humeral head without functional limitations. For HSL reduction, we place a 1.6-mm K-wire in the central lesion under arthroscopic and fluoroscopic control from posterior to anterior in lateral drilling direction. Then, a 7-mm cannulated drill is used for preparing the reduction canal. Afterward, the HSL is reduced via bone tamp, also under arthroscopic and fluoroscopic control. No bone substitution material is used to fill the canal; only a standard wound closure is performed. Arthroscopic-controlled reduction of impacted humeral head fractures seems to be a possible and relatively easy way to perform an anatomical restoration of HSLs. Because the exact location of HSLs can vary slightly, the exact surgical setting might be slightly different each time. Biomechanical studies already show similar stabilizing properties of this procedure compared with established techniques but without losing external rotation. Further studies need to review the potential rate of humeral head necrosis or secondary loss of reduction.

Percutaneous elevation of radial head fractures without fixation – a promising technique

In Mason type II radial head fractures surgical treatment is recommended. A promising technique is percutaneous elevation for depressed monofragmentary articular surface fractures. This study aimed to investigate the radiographic outcome, complication and revision rate following percutaneous radial head reduction without fixation in Mason type II fractures. A retrospective study was performed between 2016 and 2021. Data on demographics, dislocation in mm based on pre, one week and at least 6 weeks post-operative x-rays as well as complications including revision surgery were noted. In all patients a 2.0mm K-wire was used as metal bone tamps to reduce the fracture under imaging intensifier until no step was identifiable following an immobilization in a backslap for a week. If no secondary dislocation was noted patients were allowed to actively move the elbow. In 36 patients at a mean age of 38.6±10.7years a percutaneous elevation was performed. The mean displacement at time of initial presentation was 2.2±1.1mm on Coyle and on lateral view 1.2±1.0mm. At initial and final follow up (9.3±2.1days, respectively 64.6±180.8days), the fracture gap was reduced with a displacement of 0.2±0.6mm on Coyle view, respectively 0.2±0.5mm, and 0.3±0.5mm, respectively 0.1±0.3mm on lateral view (p<0.005). The mean surgical time was 14.8±12.2minutes and no complication nor secondary fracture dislocation was observed. This study shows that percutaneous closed reduction without fixation in Mason type II fractures is a very effective technique with a short surgical time and no complications if patients are selected correctly. Level of evidence: Level III, retrospective trial

Reconstructive Allograft Preparation for Long Bone Intercalary Segments After Tumor Resections: Toronto Sarcoma Protocol.

Reconstructive Allograft Preparation for Long Bone Intercalary Segments After Tumor Resections: Toronto Sarcoma Protocol.

Withdrawn: Percutaneous elevation of radial head fractures without fixation – a promising technique

<h2>Abstract</h2><h3>Introduction</h3> In Mason type II radial head fractures surgical treatment is recommended. A promising technique is percutaneous elevation for depressed monofragmentary articular surface fractures. This study aimed to investigate the radiographic outcome, complication and revision rate following percutaneous radial head reduction without fixation in Mason type II fractures. <h3>Methods</h3> A retrospective study was performed between 2016 and 2021. Data on demographics, dislocation in mm based on pre-, one week and at least 6 weeks postoperative x-rays as well as complications including revision surgery were noted. In all patients a 2.0mm K-wire was used as metal bone tamps to reduce the fracture under imaging intensifier until no step was identifiable following an immobilization in a backslap for a week. If no secondary dislocation was noted patients were allowed to actively move the elbow. <h3>Results</h3> In 36 patients at a mean age of 38.6±10.7years a percutaneous elevation was performed. The mean displacement at time of initial presentation was 2.2±1.1mm on Coyle and on lateral view 1.2±1.0mm. At initial and final follow-up (9.3±2.1days, respectively 64.6±180.8days), the fracture gap was reduced with a displacement of 0.2±0.6mm on Coyle view, respectively 0.2±0.5mm, and 0.3±0.5mm, respectively 0.1±0.3mm on lateral view (p<0.005). The mean surgical time was 14.8±12.2minutes and no complication nor secondary fracture dislocation was observed. <h3>Conclusion</h3> This study shows that percutaneous closed reduction without fixation in Mason type II fractures is a very effective technique with a short surgical time and no complications if patients are selected correctly.

Arthroscopically Assisted Percutaneous Screw Fixation of Tibial Plateau Fractures.

This technique involves the use of both arthroscopy and fluoroscopy to facilitate reduction and fixation of the tibial plateau fracture. Through a minimally invasive technique, the depressed articular joint surface is targeted with use of preoperative computed tomography (CT) scans and intraoperative biplanar fluoroscopy. Reduction is then directly visualized with arthroscopy and fixation is performed with use of fluoroscopy. Lastly, restoration of the articular surface is confirmed with use of arthroscopy after definitive fixation. Modifications can be made as needed. The traditional method for fixation of displaced tibial plateau fractures is open reduction and internal fixation. Articular reduction can be visualized directly with an open submeniscal arthrotomy and an ipsilateral femoral distractor or indirectly with fluoroscopy. Visualization of the articular surface is essential to achieve anatomic reduction of the joint line. Inspection of the posterior plateau is difficult with an open surgical approach. Arthroscopically assisted percutaneous screw fixation of a tibial plateau fracture may allow for improved restoration of articular surfaces through enhanced visualization. Less soft-tissue dissection is associated with lower morbidity and may result in less damage to the blood supply, lower rates of infection and wound complications, faster healing, and better mobility for patients. In our experience, this technique has been successful in patients with severe osteoporosis and comminution of depressed fragments. If total knee arthroplasty is required, we have also observed less damage to the blood supply and fewer surgical scars with use of this surgical technique. Arthroscopically assisted percutaneous screw fixation of a tibial plateau fracture facilitates anatomical reduction through a less invasive approach. Patients undergoing this method of tibial plateau fracture fixation are able to engage earlier in rehabilitation2. Studies have shown early postoperative range of motion, excellent patient-reported outcomes, and minimal complications7,8. Arthroscopically assisted fixation can be applied to a variety of tibial plateau fractures; however, the minimally invasive approach is best suited for patients with isolated lateral tibial plateau fractures (Schatzker I to III) and a cortical envelope that can be easily restored. The cortical envelope refers to the outer rim of the tibial plateau. Fracture pattern and ligamentotaxis determine the cortical envelope, which can be evaluated on preoperative CT scans. In our experience, even depressed segments with a high degree of comminution may be treated with use of this technique with satisfactory results.Articular depression should be targeted with use of a preoperative CT scan and intraoperative fluoroscopy and arthroscopy.The surgeon should be careful not to "push up" in 1 small area; rather, a "joker" elevator or bone tamp should be utilized, moving anterior to posterior, which can be frequently assessed with arthroscopy.The intra-articular pressure of the arthroscopy irrigation fluid should be low (≤45 mm Hg or gravity flow), and the operative extremity should be monitored for compartment syndrome throughout the procedure. ACL = anterior cruciate ligamentK-wires = Kirschner wiresORIF = open reduction and internal fixationAP = anteroposteriorCR = computed radiography.

Contribution of Minimally Invasive Bone Augmentation With PMMA Cement in Primary Fixation of Schatzker Type II Tibial Plateau Fractures.

Background: The most common type of fracture of the lateral tibial plateau is the Schatzker type II split-depressed fracture. Minimally invasive surgery using balloon reduction appears to be very promising compared to the gold standard using a bone tamp. This surgery aims to have the best reduction and stabilization to benefit from an early passive and active rehabilitation to avoid stiffening and muscle wasting. Using a balloon for fracture reduction has allowed the use of semi-liquid Injectable Bone Cement (IBC) fillers. These fillers can be phosphocalcic or polymethyl methacrylate (PMMA). The latest recommendations on these IBCs in spinal surgery increasingly rule out phosphocalcic fillers because of their low mechanical strength. Questions/purposes: 1) What is the mechanical influence of IBC filling (PMMA) regarding the split and depression components of a Schatzker type II fracture? 2) What is the mechanical influence of osteosynthesis regarding the split and depression components of a Schatzker type II fracture with or without PMMA filing in three different kinds of percutaneous fixations? Methods: This biomechanical study was performed on 36 fresh frozen tibia/fibula specimens. Six groups were formed according to the type of percutaneous osteosynthesis or possible PMMA filling. Mechanical strength tests were carried out using a Unicompartmental Knee prosthesis and displacement components were measured on either side of the separation on the anterolateral facet by optical method. Results: We found a significant difference between cementless and cemented osteosynthesis for depression fracture stabilization (difference −507.56N with 95% confidence interval [−904.17; −110.94] (p-value = 0.026)). The differences between the different types of osteosynthesis were not significant (p-value = 0.58). There was a significant difference between osteosynthesis without cement and osteosynthesis with cement on separation (difference −477.72N [−878.52; −76.93] (p-value = 0.03)). The differences between the different types of fixations were not significant regarding separation (p-value = 0.99). Conclusion: PMMA cement significantly improves primary stability, regardless of the type of osteosynthesis for a Schatzker type II plateau fracture. Filling with PMMA cement during tuberoplasty seems to be a very promising strategy in association with percutaneous osteosynthesis to allow rapid recovery after surgery.

A Smart Technique to Remove Ruptured Inflatable Bone Tamp From the Vertebral Body in Balloon Kyphoplasty.

Accidental rupture of the inflatable bone tamp is a rare but possible complication during balloon kyphoplasty. We describe an easy and minimal invasive technique to remove this foreign body from fractured vertebra. A 62-year-old female patient with severe osteoporosis had a low energy trauma and sustained burst fracture of the 12th thoracic (Th12) vertebra. The inflated bone tamp was not possible to be fully deflated and during the maneuvers to withdraw the balloon, it was disassembled and trapped under the distal end of working cannula, remaining within the bone cavity formed by balloon. Since no standard recommendation for this complication exists in current literature, we faced the dilemma of either leaving ruptured bone tamp in situ or removing it with a more extensive approach. We decided to use an alternative minimal invasive technique and managed to remove it through the right pedicle using a small size straight pituitary rongeur forceps under biplane continuous image intensifier and neuromonitoring. Subsequently, balloon kyphoplasty (BK) was performed through the left cannula accompanied with pedicle screw fixation of the adjacent vertebrae. The patient was followed up to our outpatient department for one year without complications. This extremely rare complication during BK consists of a challenge for spine surgeons and interventional radiologists. The described technique is relatively easy, safe, minimal invasive, time-saving and avoids further complications related with trapping of foreign bodies within the vertebral body.

Pin Leverage Technique: A Simple Percutaneous Technique for Elevation of Posterolateral Tibial Plateau Fractures.

Depressed lateral tibial plateau fractures with a large central or posterior fragment can be seen in isolation or association with complex proximal tibia fractures. Conventionally elevation of the large depressed fragment is done by bone tamp through a medial metaphyseal window in isolated fractures, or the fractured window in associated complex fracture scenarios. Though various instruments have been devised for this purpose, reaching the posterior aspect of lateral condyle through the medial metaphyseal window is not always easy, considering the difficulty in aiming and trajectory. Excessive maneuvering can result in the widening of the medial metaphyseal window, leaves a large metaphyseal void, intraarticular penetration of elevating device, and comminution of the depressed fragment. Described herein is an alternate percutaneous technique for effective reduction of selected lateral tibial plateau depression fractures using Steinmann pin. Twenty- one patients with at least 1-year follow-up with successful outcomes have benefitted from this reduction technical tip thus far.

The use of bidirectional rapid reductor in minimally invasive treatment of bicondylar tibial plateau fractures: preliminary radiographic and clinical results

BackgroundMinimally invasive treatment of complex tibial plateau fracture represents one of the most challenging problems in orthopedic surgery. We intended to describe the percutaneous surgery involving an originally designed traction device which might facilitate the closed reduction for bicondylar tibial plateau fractures. Further, to assess the clinical outcomes of this minimally invasive technique.MethodsBetween December 2015 and July 2016, Twenty-one patients, mean age 43.71 ± 13.80 years, suffering from a bicondylar tibial plateau fracture (AO/OTA 41-type C) were included. All fractures were firstly reduced by skeletal traction with the aid of bidirectional rapid reductor, and residual depressed fragments were treated with minimally invasive bone tamp reduction. We then evaluated at a minimum follow-up of one year: (1) the rate of complications, (2) the radiographic outcomes (the amount of depression, tibial plateau widening, tibial plateau angle and posterior slope angle) and (3) the clinical outcome (Rasmussen scoring system).ResultsAll patients had their fractures healed without secondary displacement. No instrument-related complications occurred during operation. Post-operatively, superficial infection was found in two patients and donor-site morbidity was found in one patient. We observed a < 5 mm step-off in 100% of patients and a < 5 mm plateau widening in 95.5% of patients. Three patients were considered indicative of malalignment with TPA > 90° or PSA > 15°. At last evaluation, the Rasmussen clinical score was excellent in 11 patients (52.3%), good in 9 (42.9%) and fair in 1 (4.8%), and the radiological score was excellent in seven patients (33.3%), good in 14 (66.7%).ConclusionsThe bidirectional rapid reductor facilitates the minimally invasive treatment of bicondylar tibial plateau fracture. The patients exhibited excellent functional recovery. These results should be validated with a larger group of patients and longer period results.Trial registrationChiCTR-OPC-16008011.

Balloon-assisted reduction, pin fixation and tricalcium phosphate augmentation for calcaneal fracture: A retrospective analysis of 42 patients

IntroductionThe treatment of intra-articular calcaneal fractures is still complex and controversial. Although open reduction and internal fixation (ORIF) is favored by many authors, several percutaneous techniques have been introduced to reduce complications and to obtain satisfactory clinical and radiological results. Among these percutaneous treatments, balloon reduction and bone graft augmentation is gaining an increasing popularity. Materials and methodsWe retrospectively examined a series of 42 patients treated operatively with a minimally invasive reduction technique using an inflatable bone tamp filled with tricalcium phosphate (calcaneoplasty) for Sander’s type II, III and IV calcaneal fractures between 2010 and 2015. Conventional X-rays and CT scan were performed pre-operatively, at 3 and 12 months post-operatively and at the last-follow-up. The American Orthopaedic Foot and Ankle Society (AOFAS) score and the Maryland Foot Score (MFS) were used for clinical evaluation. Bohler’s angle and the Score Analysis of Verona (SAVE) were calculated to assess bone reduction. ResultsAll 42 patients were available for clinical and radiographic follow-up at an average of 665 months (range 38–92). At the last follow-up the mean AOFAS score was 82.1 (good) and the mean MFS was 80.8 (good). The mean Bohler’s angle improved from 1.29° pre-operatively to 27.8° at the last follow-up. The SAVE highlighted good and excellent results in 30 (72%) patients. There were only 3 (7.1%) cases of superficial skin infection with only 6 (14.2%) patients complaining of residual pain. No cases of adverse reaction or deep infection were observed. ConclusionsCalcaneoplasty appears to be a valid option of treatment for calcaneal fractures and a reliable alternative to ORIF. This technique allows stable fracture reduction and early weight-bearing combined with good clinical and radiological results and few complications.

Arthroscopic-assisted inflatable bone tamp reduction for treatment of posterolateral tibial plateau fractures

AimOur study aimed to assess the safety and efficacy of an innovative arthroscopic-assisted inflatable tamp reduction technique for the treatment of posterolateral tibial plateau fractures. Patients and methodsTwenty-six patients with posterolateral tibial plateau fractures were treated with arthroscopy through inflation reduction technique were enrolled. Arthroscopy was used to observe the reduction of articular surface to avoid over-reduction or de-reduction. An arthroscopic assessment of anatomic joint reduction completed the procedure. Inflatable bone tamp was used to reduce the fractures and calcium phosphate cement was used as bone substitute to augment the repairs. ResultsUnder arthroscopy, the reduction was observed to be excellent without any residual deformity in all the cases. Cement overflow into the soft tissues or the knee joint was not observed. During the follow-up period, no obvious articular surface subsidence (>5 mm) was observed and no evidence of posttraumatic osteoarthritis could be detected. Radiographs under full weight bearing revealed neither loss of reduction nor any valgus deviation. Three months after surgery, the graft was almost completely replaced by new bone. The functional evaluation following the Rasmussen score yielded excellent results. ConclusionsThis study provided a novel technique for the reduction of depressed and split-depressed pasterolateral tibial plateau fractures. Arthroscopic-assisted inflatable bone tamp reduction is an effective method for the treatment of posterolateral tibial plateau fractures.

Contribution of minimally invasive bone augmentation to primary stabilization of the osteosynthesis of Schatzker type II tibial plateau fractures: Balloon vs bone tamp

BackgroundSchatzker type II tibial plateau fractures necessitate the least invasive treatment possible. Arthroscopic reduction by bone tamp followed by osteosynthesis is the current gold standard for this type of tibial plateau fracture. The objective of this study was to compare this technique to anterior approach tuberoplasty with balloon reduction. The comparison criteria were residual articular step off, metaphyseal cavity volume formed during reduction, and mechanical strength to separation and to depression displacement. MethodsFractures were created on 12 human cadaveric tibiae and reduced by a minimally invasive approach in six specimens by a balloon, and by bone tamp in the six others. Articular step off and metaphyseal-epiphyseal cavity volume were measured by TDM. Mechanical tests were performed up to assembly failure to characterize structural strength. Secondary displacements, fracture depression displacement and separation were measured by optical methods. FindingsThere was no significant difference in step off measurement after balloon reduction or bone tamp (0.29 cm vs 0.37 cm; p = 0.06). The cavity volume formed by balloon reduction was significantly smaller than the volume created by bone tamp reduction (0.45 cm3 vs 5.12 cm; p = 0.002). The compressive load required for assembly failure was significantly greater in the balloon group than in the bone tamp group (1210.17 N vs 624.50 N; p = 0.015). InterpretationThere exists a correlation between load to failure of the assembly frame and the metaphyseal volume required for bone fracture reduction. The minimally invasive balloon technique has fewer negative effects on the osseous stock, thereby enabling better primary structural strength of the fracture.

Magnetic kyphoplasty: A novel drug delivery system for the spinal column.

Vertebral compression fractures (VCFs) caused by metastatic malignancies or osteoporosis are devastating injuries with debilitating outcomes for patients. Minimally invasive kyphoplasty is a common procedure used for symptomatic amelioration. However, it fails in treating the underlying etiologies of VCFs. Use of systemic therapy is limited due to low perfusion to the spinal column and systemic toxicity. Localized delivery of drugs to the vertebral column can provide a promising alternative approach. A porcine kyphoplasty model was developed to study the magnetically guided drug delivery of systemically injected magnetic nanoparticles (MNPs). Jamshidi cannulated pedicle needles were placed into the thoracic vertebra and, following inflatable bone tamp expansion, magnetic bone cement was injected to the vertebral body. Histological analysis was performed after intravenous injection of MNPs. Qualitative analysis of harvested tissues revealed successful placement of magnetic cement into the vertebral body. Further quantitative analysis of histological sections of several vertebral bodies demonstrated enhanced accumulation of MNPs to regions that had magnetic cement injected during kyphoplasty compared to those that did not. By modifying the kyphoplasty bone cement to include magnets, thereby providing a guidance stimulus and a localizer, we were successfully able to guide intravenously injected magnetic nanoparticles to the thoracic vertebra. These results demonstrate an in-vivo proof of concept of a novel drug delivery strategy that has the potential to treat the underlying causes of VCFs, in addition to providing symptomatic support.

Percutaneous Reduction and Internal Fixation for Monocondylar Fractures of Tibial Plateau: A Systematic Review.

Instead of extensive dissection of soft tissue around the fracture site, percutaneous techniques have unique advantages in managing displaced fragments, including preservation of soft tissues, less blood loss, lower risk of complications, and earlier functional rehabilitation. However, there are few systematic reviews on the effects of percutaneous reduction and internal fixation (PRIF) for tibial plateau fractures. A systematic search of Cochrane, EMBASE, and MEDLINE databases was performed for all publicly available data in March 2017 regarding the use of PRIF in treating monocondylar tibial plateau fractures. Basic information of included articles, surgical information, clinical outcomes, and concomitant soft tissue injuries were collected for analysis. Finally, a total of 20 articles including 561 patients were retrieved. Traffic accident was the most common cause of injury. Percutaneous techniques using bone tamp reduction were described in all studies. The majority (≥85%) of patients were classified as excellent or good according to clinical and radiological Rasmussen scores. The overall complication rate was 6.6%, with loss of reduction the most frequent complication with an incidence of 2.4%. This systematic review indicated that PRIF was an optimal alternative that physicians should consider for the treatment of monocondylar tibial plateau fractures.

Suture Fixation Using Polyblend Polyethylene Sutures With Hydroxyapatite Block for an Intra-articular Depression Fracture of the Pisiform Bone.

Few cases in which open reduction and internal fixation was performed for displaced pisiform fractures have been reported. We present a new surgical technique for the treatment of depressed intra-articular pisiform fractures. First, the depressed fragment was reduced by pushing the bone tamp. Then, the fracture void resulting from the reduction of the depressed fragment was filled with a shaped hydroxyapatite block. Finally, the fragments were sutured using braided polyblend polyethylene sutures. The postoperative radiography could achieve a well-reduced articular facet, and this procedure had a good clinical outcome.

Effect of an Outer Sleeve on an Inflatable Balloon Tamp in Terms of Height Restoration Under Simulated Physiological Load.

An in vitro biomechanical study. The aim of this study was to determine the effect of an optional sleeve on height restoration and compare it with the fracture reduction achieved by a commercially available inflatable bone tamp under simulated physiological load (110 N). Loss of reduction after bone tamp deflation before cement injection still remains a concern. The optional sleeve surrounds the bone tamp to help maintain height during the kyphoplasty procedure while filling the created cavity with bone cement on the contralateral side. Eighteen osteoporotic vertebral bodies (VBs) (T11-L4) were alternately assigned to 1 of the 2 treatment groups: group A: KYPHON (Kyphon Inc.) and group B: AFFIRM with sleeve (Globus Medical Inc.). The VBs were compressed axially at a rate of 5 mm/min until compressed to 40% of the initial anterior height. The fractured VBs then underwent kyphoplasty with cement augmentation while still maintaining load (110 N). The augmented VBs were then recompressed and anterior VB height (mm) and wedge angle (degrees) were measured initially after mechanically creating an anterior wedge fracture, and after repairing the compression fracture. The effect of kyphoplasty on vertebral height, kyphotic angle, cement volumes, and inflation pressures were compared between the treatment groups. Failure load (N) data were compared between intact and repaired VBs. Average percentage of lost VB height restored in group A was 30%, compared with 56% for group B. The mean changes in wedge angle were similar to those of vertebral height measurements. No significant difference in mean inflation pressures (group A: 175±37 psi; group B: 160±36 psi) were found between the 2 groups. Average percentage increase in failure load was 241% and 212% in groups A and B, respectively. Some height restoration was observed using the commercially available bone tamp in fractured VBs under simulated physiological load. The use of an outer sleeve significantly enhanced height restoration compared with the inflatable bone tamp alone.

An In Vitro Evaluation of Fracture Reduction Achieved by Inflatable Bone Tamps Under Simulated Physiological Load.

An in vitro biomechanical study. To determine the fracture reduction achieved by a novel inflatable bone tamp under simulated physiological load. Previous biomechanical studies have showed that kyphoplasty allows near-total restoration of lost vertebral height in unloaded conditions and partial height restoration under simulated physiological loads. Clinically, loss of reduction has been observed after bone tamp deflation, before cement injection. The present study evaluated fracture reduction achieved by an inflatable bone tamp during kyphoplasty while maintaining physiological load. Comparison to commercially available inflatable bone tamp was also performed. Eighteen osteoporotic vertebral bodies (T11-L4) were alternately assigned to one of the 2 treatment groups: group A-AFFIRM (Algea Thearpies, a division of Globus Medical Inc., Audubon, PA); and group B-KYPHON (Kyphon Inc., Sunnyvale, CA). The vertebral bodies were compressed axially on an MTS Bionix 858 machine at a rate of 5 mm/min until compressed to 40% of the initial anterior height. Load versus displacement was recorded. The fractured VBs then underwent kyphoplasty with cement augmentation. The augmented vertebral bodies were then recompressed and anterior vertebral body height (mm) and wedge angle (degrees) was measured initially, after mechanically creating an anterior wedge fracture, and after repairing the compression fracture. Each vertebral body was subjected to 111 N load to simulate in vivo physiological loading during inflation and cement augmentation. The vertebral height, wedge angle, cement volume, and inflation pressures were compared between the treatment groups using an unpaired t test (P<0.05). Failure loads were compared between intact and repaired VBs using a paired t test (P<0.05). Average lost height restored in group A was 29%, and 30% in group B compared to the compressed state. Similar trends were observed in the mean changes of vertebral body wedge angle in both the groups. No significant difference in mean inflation pressures (group A 182±33 psi; group B 175±37 psi) were found between the 2 groups. Average percentage increase in failure load was 218% and 241% for groups A and B, respectively. Mean injected cement volume was 6.65±0.65 and 6.73±0.41 mL for groups A and B, respectively. Some height restoration was observed using the 2 bone tamps in fractured vertebral bodies under simulated physiological load. The fracture reduction achieved by the 2 inflatable bone tamps was equivalent. No significant difference between mean inflation pressures and failure load was demonstrated between the 2 groups.

Early Results of the Medial Approach for Arthroscopic-Assisted Fixation of Lateral Tibial Plateau Fractures

The use of arthroscopy in the management of tibial plateau fractures is not a particularly new concept. It has been used successfully for Schatzker types I–III fractures. In addition to evaluating the fracture itself, it is easier to evaluate the other intraarticular structures. Coventionally, reduction for lateral tibial plateau fractures have been performed through a laterally based metaphyseal window, which is not without limitations, including difficulty with reduction of the fracture, as well as bone grafting though the resultant short subchondral tunnel. Also, there is a risk of lateral vascular supply distrubtion because of same side fracture. A medially based metaphyseal window to approach lateral tibial plateau fractures allows for minimal insult to the soft tissues, with advantageous ease of reduction and grafting through a longer tunnel for subchondral support. We aimed to present our initial experiences in twelwe cases approaching lateral tibial plateau fractures through a medial metaphyseal window.Material-Methods:Our series involves 12 patients with 7 Schatzker type II, 3 Schatzker type I, and 2 Schatzker type III fractures. There were 8 males and 4 females. The average age at the time of surgery was 37 (25-57) years. All of the patients underwent plain radiography and BT in each knee Time from injury to surgery was 6.2 days. Follow up was 18 months (9-22 months).Firstly diagnostic arthroscopy was performed. Concomittant pathology was adreessed as needed. There was 3 lateral meniscus tear that treated with partial meniscectomy. An ACL guide pin was placed percutaneously anteromedial tibia approximately 9 cm distal to the joint line. Once stisfactory positioning a cortical window 1x2 cm. made around the guide pin. Reduction was accomplished with a bone tamp that fits easily into the tunnel. Screws were used as rafters to support the articular surface and subchondral bone. We used in 7 patients lateral plate and screws and in 5 patients only screws. Care was taken to keep pump pressure at approximately 40 millimeters of mercury for alleviate the risk of compartment syndrome.Results:No complications related to the procedure were observed. No secondary loss of reduction was observed in radiological controls. Functional assessment according to HSS of the patients were excellent in 5 cases, good in 5 cases and fair 2 cases.Discussion:Because depressed fragments are elevated from distal cortical windows, the importance of an intact, or easily restored, “cortical envelope” is paramount. This case series showed satisfactory early clinical results.clinical picturepostop. x-ray

Biomechanical comparison of acute Hill-Sachs reduction with remplissage to treat complex anterior instability

Acute Hill-Sachs reduction represents a potential alternative method to remplissage for the treatment of an engaging Hill-Sachs lesion. This study biomechanically compared the stabilizing effects of an acute Hill-Sachs reduction technique and remplissage. Six cadaveric shoulders were tested. For the acute Hill-Sachs lesion, a unique model was used to create a 30% defect, compressing the subchondral bone while preserving the articular surface. Five scenarios were tested: intact specimen, bipolar lesion, Bankart repair, remplissage with Bankart repair, and Hill-Sachs reduction technique with Bankart repair. The Hill-Sachs lesion was reduced through a lateral cortical window with a bone tamp, and the subchondral void was filled with bone cement. At 90° of abduction and external rotation (ER), total translation was 11.6 ± 0.9 mm for the bipolar lesion. This was significantly reduced after remplissage (5.9 ± 1.1 mm; P < .001) and after Hill-Sachs reduction (4.7 ± 0.4 mm; P < .001). Compared with an isolated Bankart repair, the average ER loss after remplissage was 4° ± 4° (P = .65), and the average ER loss after Hill-Sachs reduction was 1° ± 3° (P = .99). Similar joint stability was conferred after both procedures, with minimal change in range of motion. Remplissage may still be the best way to address chronic Hill-Sachs lesions; however, the reduction technique is a more anatomic alternative and may be a potential option for treating an acutely engaging Hill-Sachs lesion.

Treatment of arthroscope osteosynthesis with bone tamp

Treatment of arthroscope osteosynthesis with bone tamp