Bone Matrix Research Articles

The respective and dependent effects of scattering and bone matrix absorption on ultrasound attenuation in cortical bone

Cortical bone is characterized by a dense solid matrix permeated by fluid-filled pores. Ultrasound scattering has potential for the non-invasive evaluation of changes in bone porosity. However, there is an incomplete understanding of the impact of ultrasonic absorption in the solid matrix on ultrasound scattering. In this study, maps were derived from scanning acoustic microscopy images of human femur cross-sections. Finite-difference time domain ultrasound scatter simulations were conducted on these maps. Pore density, diameter distribution of the pores, and nominal absorption values in the solid and fluid matrices were controlled. Ultrasound pulses with a central frequency of 8.2 MHz were propagated, both in through-transmission and backscattering configurations. From these data, the scattering, bone matrix absorption, and attenuation extinction lengths were calculated. The results demonstrated that as absorption in the solid matrix was varied, the scattering, absorption, and attenuation extinction lengths were significantly impacted. It was shown that for lower values of absorption in the solid matrix (less than 2 dB mm−1), attenuation due to scattering dominates, whereas at higher values of absorption (more than 2 dB mm−1), attenuation due to absorption dominates. This will impact how ultrasound attenuation and scattering parameters can be used to extract quantitative information on bone microstructure.

RUFY4 deletion prevents pathological bone loss by blocking endo-lysosomal trafficking of osteoclasts

Mature osteoclasts degrade bone matrix by exocytosis of active proteases from secretory lysosomes through a ruffled border. However, the molecular mechanisms underlying lysosomal trafficking and secretion in osteoclasts remain largely unknown. Here, we show with GeneChip analysis that RUN and FYVE domain-containing protein 4 (RUFY4) is strongly upregulated during osteoclastogenesis. Mice lacking Rufy4 exhibited a high trabecular bone mass phenotype with abnormalities in osteoclast function in vivo. Furthermore, deleting Rufy4 did not affect osteoclast differentiation, but inhibited bone-resorbing activity due to disruption in the acidic maturation of secondary lysosomes, their trafficking to the membrane, and their secretion of cathepsin K into the extracellular space. Mechanistically, RUFY4 promotes late endosome-lysosome fusion by acting as an adaptor protein between Rab7 on late endosomes and LAMP2 on primary lysosomes. Consequently, Rufy4-deficient mice were highly protected from lipopolysaccharide- and ovariectomy-induced bone loss. Thus, RUFY4 plays as a new regulator in osteoclast activity by mediating endo-lysosomal trafficking and have a potential to be specific target for therapies against bone-loss diseases such as osteoporosis.

Myositis ossificans mimicking bone surface osteosarcoma: case report with literature review.

Myositis ossificans, a benign tumor composed of spindle cells and osteoblasts, can clinically and radiologically mimic osteosarcoma. While recognition and accurate diagnosis of myositis ossificans can be a challenge, this is critical as it may allow a conservative surgical approach to maximize functional outcomes. Herein, we present a patient with surface myositis ossificans confirmed genetically by the presence of COL1A1::USP6 gene fusion, along with a literature review. Due to the enhanced visualization of the bone matrix, computed tomography (CT) imaging may be a superior imaging modality to magnetic resonance (MR) imaging. Staged biopsies with samples obtained from the periphery and center of the lesions may allow pathologists to discern the zonal distribution histologically. Furthermore, immunohistochemistry fluorescence in situ hybridization and molecular testing can aid in the distinction of myositis ossificans from mimics. Because of their resemblance to other bone tumors, these cases of myositis ossificans highlight the importance of a multidisciplinary approach integrating clinical, radiologic, and pathologic analysis and involving serial imaging, sampling, and judicious use of ancillary immunohistochemical and molecular testing.

TempEasy 3D Hydrogel Coculture System Provides Mechanistic Insights into Prostate Cancer Bone Metastasis.

Patients diagnosed with advanced prostate cancer (PCa) often experience incurable bone metastases; however, a lack of relevant experimental models has hampered the study of disease mechanisms and the development of therapeutic strategies. In this study, we employed the recently established Temperature-based Easy-separable (TempEasy) 3D cell coculture system to investigate PCa bone metastasis. Through coculturing PCa and bone cells for 7 days, our results showed a reduction in PCa cell proliferation, an increase in neovascularization, and an enhanced metastasis potential when cocultured with bone cells. Additionally, we observed increased cell proliferation, higher stemness, and decreased bone matrix protein expression in bone cells when cocultured with PCa cells. Furthermore, we demonstrated that the stiffness of the extracellular matrix had a negligible impact on molecular responses in both primary (PCa cells) and distant malignant (bone cells) sites. The TempEasy 3D hydrogel coculture system is an easy-to-use and versatile coculture system that provides valuable insights into the mechanisms of cell-cell communication and interaction in cancer metastasis.

Vasoactive intestinal peptide exerts an osteoinductive effect in human mesenchymal stem cells.

Several neuropeptides present in bone tissues, produced by nerve fibers and bone cells, have been reported to play a role in regulating the fine-tuning of osteoblast and osteoclast functions to maintain bone homeostasis. This study aims to characterize the influence of the neuropeptide vasoactive intestinal peptide (VIP) on the differentiation process of human mesenchymal stem cells (MSCs) into osteoblasts and on their anabolic function. We describe the mRNA and protein expression profile of VIP and its receptors in MSCs as they differentiate into osteoblasts, suggesting the presence of an autocrine signaling pathway in these cells. Our findings reveal that VIP enhances the expression of early osteoblast markers in MSCs under osteogenic differentiation and favors both bone matrix formation and proper cytoskeletal reorganization. Finally, our data suggest that VIP could be exerting a direct modulatory role on the osteoblast to osteoclast signaling by downregulating the receptor activator of nuclear factor-κB ligand/osteoprotegerin ratio. These results highlight the potential of VIP as an osteoinductive differentiation factor, emerging as a key molecule in the maintenance of human bone homeostasis.

Mechanism of action of Sambucus williamsii Hance var. miquelii in the treatment of osteoporosis analyzed by UHPLC-HRMS/MS combined network pharmacology and experimental validation

Sambucus williamsii Hance var. miquelii(SWH) is a precious wild Chinese herb whose fruit, rhizome, leaves and root bark can be used as medicine. Sambucus Linn has pharmacological effects such as anti-osteoporosis, promoting fracture healing, anti-viral and anti-inflammatory. In this study, the main chemical components of the alcoholic extracts from SWH were rapidly identified by ultra-high performance liquid chromatography-quadrupole orbit trap high-resolution mass spectrometry (UHPLC- HRMS MS), and a total of 42 compounds were characterized from the alcoholic extracts of SWH. The results of network pharmacological validation showed that kaempferol, quercetin, luteolin, isorhamnetin and morroniside were the main active components, and KEGG enrichment demonstrated that SWH mainly affected the signaling pathways such as PI3K-Akt, TNF and FoxO by modulating the related targets such as AKT1, PIK3R1, EGFR, RELA SRC and PTGS2. The molecular docking results showed binding solid activity between the main active components of SWH and the targets. The network pharmacology was validated by establishing an animal model of osteoporosis (OP) in rats by gavage administration of vitamin A acid. The results of the pharmacological experiments showed that SWH could improve the degree of bone loss in the femur of osteoporotic rats, increase the number of trabeculae and decrease trabeculae porosity, up-regulate the Ca and P content in the serum of OP rats, down-regulate the scope of ALP and BGP in the serum, and promote the calcification of the bone matrix, and then exert the anti-OP efficacy. In this study, network pharmacology and pharmacological experiments verified the pharmacological mechanism of SWH in anti-OP rats. This provides a theoretical basis for the research and development of anti-OP drugs and a reference for the application of other traditional Chinese medicines in treating OP diseases.

CAD-CAM and heat-press: Comparison of internal and marginal fit of lithium disilicate copings.

The aim of this in vitro study is to compare the performance of digital and conventional methods in the manufacture of single copings in terms of the internal and marginal fit. Twenty-four prefabricated titanium Cone Morse Exact abutments of the lateral anatomical type were used to manufacture 24 lithium disilicate copings in the CAD-CAM Ceramill (n = 12) and heat-press (n = 12) systems. The copings were cemented using a self-adhesive resin cement (RelyX U-200; 3M ESPE) and then cut vertically. The cement line was photographed using an optical microscope at ×100 and ×200 magnification and then the internal and marginal regions were measured. The mean values of fits, for the CAD-CAM and heat-press techniques, respectively, were (μm): angular regions, 81.8 and 75.3; linear regions, 63.1 and 60.1; incisal regions, 171.1 and 114.7; marginal discrepancy, 74.1 and 75.2; and absolute marginal discrepancy, 99.5 and 96.2. MANOVA test showed that there is an effect of the techniques on the regions (p < .05). The effects of laboratories and the interaction between laboratories and techniques on the regions were not statistically significant (p > .05). The techniques evaluated presented clinically acceptable results for the marginal fit. However, the conventional method performed better for the internal fit. RESEARCH HIGHLIGHTS: Scientific evidence regarding the methods of making prosthesis can help the dental professional in decision-making. Digital and conventional methods is both good in the manufacture of single copings in terms of the internal and marginal fit.

Isotopic study of lipids and collagen in bones from archaeological and modern ungulates for the study of paleodiets in Argentina

In this paper we carried out a sequential extraction of lipids and collagen and obtained carbon and nitrogen stable isotope values of archaeological and modern bone samples of native ungulates from the Argentine Patagonia (Lama guanicoe, Pudu puda, Hippocamelus bisulcus) and Northwest (Lama sp., Vicugna vicugna). Collagen and lipids are biomolecules with exceptional survival rates in archaeological bone matrixes and provide complementary information about diet. We studied 28 ungulate specimens and obtained bulk δ13C values (δ13Clip, δ13Ccoll) and δ15N values to evaluate protein diet, whole diet, and offsets between values from lipids and collagen (Δ13Clip-coll). Results showed greater variability in the offsets of the different ungulate species than previously reported for terrestrial herbivores. This variability could be attributed to differences in body mass, particular niche adaptations, seasonal metabolic stress, diet change, and/ or human-ungulate interactions in each case. This study sheds light on the potential of paired lipid-collagen stable isotope values for interpreting paleodiet dynamics and unraveling individual life histories.

An in silico approach to elucidate the pathways leading to primary osteoporosis: age-related vs. postmenopausal.

Numerical models of bone remodelling have traditionally been used to perform in silico tests of bone loss in postmenopausal women and also to simulate the response to different drug treatments. These models simulate the menopausal oestrogen decline by altering certain signalling pathways. However, they do not consider the simultaneous effect that ageing can have on cell function and bone remodelling, and thus on bone loss. Considering ageing and oestrogen decline together is important for designing osteoporosis treatments that can selectively counteract one or the other disease mechanism. A previously developed bone cell population model was adapted to consider the effect of ageing through: (1) the decrease of TGF- contained in the bone matrix and (2) an increased production of sclerostin by non-skeletal cells. Oestrogen deficiency is simulated in three different ways: (a) an increase in RANKL expression, (b) a decrease in OPG production, and (c) an increase in the responsiveness of osteoclasts to RANKL. The effect of ageing was validated using the cross-sectional study of (Riggs et al. in J Bone Miner Res 19: 1945-1954, 2004) on BMD of trabecular bone of the vertebral body of men. The joint effect of ageing and oestrogen deficiency was validated using these same clinical results but in women. In ageing, the effect of the increasing production of sclerostin is more important than the decrease of TGF- , while the three mechanisms used to simulate the effect of oestrogen deficiency produce almost identical responses. The results show that an early menopause leads to a lower average density in the fifth decade, but after the sixth decade the average density is independent of the age at menopause. Treatment of osteoporosis with denosumab was also simulated to conclude that the drug is not very effective if started before 10 years after menopause or before age 60.

A sponge-like nanofiber melatonin-loaded scaffold accelerates vascularized bone regeneration via improving mitochondrial energy metabolism

Electrospun nanofibers have been widely employed in bone tissue engineering for their ability to mimic the micro to nanometer scale network of the native bone extracellular matrix. However, the dense fibrous structure and limited mechanical support of these nanofibers pose challenges for the treatment of critical size bone defects. In this study, we propose a facile approach for creating a three-dimensional scaffold using interconnected electrospun nanofibers containing melatonin (Scaffold@MT). The hypothesis posited that the sponge-like Scaffold@MT could potentially enhance bone regeneration and angiogenesis by modulating mitochondrial energy metabolism. Melatonin-loaded gelatin and poly-lactic-acid nanofibers were fabricated using electrospinning, then fragmented into shorter fibers. The sponge-like Scaffold@MT was created through a process involving homogenization, low-temperature lyophilization, and chemical cross-linking, while maintaining the microstructure of the continuous nanofibers. The incorporation of short nanofibers led to a low release of melatonin and increased Young's modulus of the scaffold. Scaffold@MT demonstrated positive biocompatibility by promoting a 14.2 % increase in cell proliferation. In comparison to the control group, Scaffold@MT significantly enhanced matrix mineralization by 3.2-fold and upregulated the gene expression of osteoblast-specific markers, thereby facilitating osteogenic differentiation of bone marrow mesenchymal stem cells (BMMSCs). Significantly, Scaffold@MT led to a marked enhancement in the mitochondrial energy function of BMMSCs, evidenced by elevated adenosine triphosphate (ATP) production, mitochondrial membrane potential, and protein expression of respiratory chain factors. Furthermore, Scaffold@MT promoted the migration of human umbilical vein endothelial cells (HUVECs) and increased tube formation by 1.3 times compared to the control group, accompanied by an increase in vascular endothelial growth factor (VEGFA) expression. The results of in vivo experiments indicate that the implantation of Scaffold@MT significantly improved vascularized bone regeneration in a distal femur defect in rats. Micro-computed tomography analysis conducted 8 weeks post-surgery revealed that Scaffold@MT led to optimal development of new bone microarchitecture. Histological and immunohistochemical analyses demonstrated that Scaffold@MT facilitated bone matrix deposition and new blood vessel formation at the defect site. Overall, the utilization of melatonin-loaded nanofiber sponges exhibits significant promise as a scaffold that promotes bone growth and angiogenesis, making it a viable option for the repair of critical-sized bone defects.

Fracture behavior of human cortical bone with high glycation content under dynamic loading

The present study simulates the fracture behavior of diabetic cortical bone with high levels of advanced glycation end-products (AGEs) under dynamic loading. We consider that the increased AGEs in diabetic cortical bone degrade the materials heterogeneity of cortical bone through a reduction in critical energy release rates of the microstructural features. To simulate the initiation and propagation of cracks, we implement a phase field fracture framework on 2D models of human tibia cortical microstructure. The simulations show that the mismatch between the fracture properties (e.g., critical energy release rate) of osteons and interstitial tissue due to high AGEs contents can change crack growth trajectories. The results show crack branching in the cortical microstructure under dynamic loading is affected by the mismatches related to AGEs. In addition, we observe cortical features such as osteons and cement lines can prevent multiple cracking under dynamic loading even with changing the mismatches due to high AGEs. Furthermore, under dynamic loading, some toughening mechanisms can be activated and deactivated with different AGEs contents. In conclusion, the current findings present that the combination of the loading type and materials heterogeneity of microstructural features can change the fracture response of diabetic cortical bone and its fragility.

Robotic endoscopic transforaminal lumbar interbody fusion: A single institution case series

BackgroundRobotic-assisted, endoscopic transforaminal lumbar interbody fusion (RE-TLIF) is a promising, minimally invasive surgical option for degenerative lumbar spondylosis/spondylolisthesis; however, outcomes data and efficacy are limited, especially in multilevel disease. Here, we present the first reported series of patients that underwent either single or multilevel RE-TLIF. MethodsA retrospective review was performed on 23 consecutive patients who underwent a single level or multilevel RE-TLIF by a single surgeon. Variables included demographics, perioperative results, pain scores, and functional outcome scores. ResultsEighteen patients (78.3 %) underwent single level RE-TLIF and 5 patients (21.7 %) underwent multilevel RE-TLIF. The median reduction of visual analog scale (VAS) for low back pain (LBP) of all subjects was 6 (IQR = 4.5, 6.5) with no significant difference between single level and multilevel RE-TLIF (p = 0.565). The median reduction of VAS for leg pain of all subjects 7 (IQR = 6, 8) with no significant difference between single level and multilevel RE-TLIF (p = 0.702). Median blood loss was 25 cc (IQR = 25, 25) and 50 cc (IQR = 25, 100) for single and multilevel RE-TLIF, respectively (p = 0.025), whereas median length of stay was 1 (IQR = 1, 1; mean = 1.0 ± 00.18) days and 1 (IQR = 1, 2; mean = 1.4 ± 00.54) days, respectively (p = 0.042). One major complication was observed requiring reoperation for demineralized bone matrix migration resulting in an L5 radiculopathy. ConclusionsSingle and multi-level RE-TLIF appears to be a safe and efficacious approach with comparable outcomes to open and other minimally invasive approaches. Additionally, we observed favorable accuracy in robot-assisted pedicle screw, endoscope, and interbody device placement.

Efficacy of sintered Zinc-doped fluorapatite scaffold as an antimicrobial regenerative bone filler for dental applications

ObjectivesThe objective of this study was to assess whether zinc-doped fluorapatite (ZnFA) could serve as an effective antimicrobial dental bone filler for bone regeneration compared to autografts. MethodsFA and 2% zinc-doped FA (2ZnFA) were synthesized and characterized in-house. Compressed and sintered FA and 2ZnFA disks were incubated with bacteria to assess antimicrobial properties. Adipose-derived stem cells were cultured on these discs to evaluate the surfaces’ ability to support cell growth and promote osteogenic differentiation. Surfaces exhibiting the highest expressions of the bone markers osteopontin and osteocalcin were selected for an in vivo study in a rat mandibular defect model. Twenty rats were divided into 5 groups, equally, and a 5mm surgical defect of the jaw was left untreated or filled with 2ZnFA, FA, autograft, or demineralized bone matrix (DBM). At 12 weeks, the defects and surrounding tissues were harvested and subjected to microCT and histological evaluations. ResultsStandard techniques such as FTIR, ICP-MS, fluoride probe, and XRD revealed the sintered FA and ZnFA's chemical compositions and structures. Bacterial studies revealed no significant differences in surface bacterial adhesion properties between FA and 2ZnFA, but significantly fewer bacterial loads than control titanium discs (p<0.05). Cell culture data confirmed that both surfaces could support cell growth and promote the osteogenic differentiation of stem cells. MicroCT analysis confirmed statistical similarities in bone regeneration within FA, 2ZnFA, and autograft groups. ConclusionThe data suggests that both FA and 2ZnFA could serve as alternatives to autograft materials, which are the current gold standard. Moreover, these bone fillers outperformed DBM, an allograft material commonly used as a dental bone void filler. Clinical SignificanceThe use of FA or 2ZnFA for treating mandibular defects led to bone regeneration statistically similar to autograft repair and significantly outperformed the widely used dental bone filler, DBM. Additional translational research may confirm FA-based materials as superior substitutes for existing synthetic bone fillers, ultimately enhancing patient outcomes.

Comparative Studies of Bone Graft and Orthobiologics for Foot Ankle Arthrodesis: A Critical Review.

Graft materials available to supplement hindfoot and ankle arthrodesis procedures include autologous (autograft) or allogeneic bone graft (allograft) but also bone graft substitutes such as demineralized bone matrix, calcium sulfate, calcium phosphate, and tricalcium phosphate/hydroxyapatite. In addition, biologic agents, such as recombinant human bone morphogenetic protein-2 or recombinant human platelet derived growth factor-BB (rhPDGF-BB), and preparations, including platelet-rich plasma or concentrated bone marrow aspirate, have been used to facilitate bone healing in ankle or hindfoot arthrodesis. The purpose of this review was to summarize the available clinical evidence surrounding the utilization and efficacy of the above materials and biological agents in ankle or hindfoot arthrodesis procedures, with emphasis on the quality of the existing evidence to facilitate clinical decision making.

Evaluation of new bone formation in critical-sized rat calvarial defect using 3D printed polycaprolactone/tragacanth gum-bioactive glass composite scaffolds

Critical-sized bone defects are a major challenge in reconstructive bone surgery and usually fail to be treated due to limited remaining bone quality and extensive healing time. The combination of 3D-printed scaffolds and bioactive materials is a promising approach for bone tissue regeneration. In this study, 3D-printed alkaline-treated polycaprolactone scaffolds (M-PCL) were fabricated and integrated with tragacanth gum- 45S5 bioactive glass (TG-BG) to treat critical-sized calvarial bone defects in female adult Wistar rats. After a healing period of four and eight weeks, the new bone of blank, M-PCL, and M-PCL/TG-BG groups were harvested and assessed. Micro-computed tomography, histological, biochemical, and biomechanical analyses, gene expression, and bone matrix formation were used to assess bone regeneration. The micro-computed tomography results showed that the M-PCL/TG-BG scaffolds not only induced bone tissue formation within the bone defect but also increased BMD and BV/TV compared to blank and M-PCL groups. According to the histological analysis, there was no evidence of bony union in the calvarial defect regions of blank groups, while in M-PCL/TG-BG groups bony integration and repair were observed. The M-PCL/TG-BG scaffolds promoted the Runx2 and collagen type I expression as compared with blank and M-PCL groups. Besides, the bone regeneration in M-PCL/TG-BG groups correlated with TG-BG incorporation. Moreover, the use of M-PCL/TG-BG scaffolds promoted the biomechanical properties in the bone remodeling process. These data demonstrated that the M-PCL/TG-BG scaffolds serve as a highly promising platform for the development of bone grafts, supporting bone regeneration with bone matrix formation, and osteogenic features. Our results exhibited that the 3D-printed M-PCL/TG-BG scaffolds are a promising strategy for successful bone regeneration.

Black Phosphorus-Based Dynamic Self-Healing Hydrogel to Integrate Demineralized Bone Matrix and Noggin-Targeting siRNA for Synergistic Osteogenesis.

Although a demineralized bone matrix (DBM) is often used as an alternative to an autologous bone graft, its clinical application is still hampered by easy dispersion of DBM particles and insufficient osteoinductivity in the defect site. Herein, we designed a self-healing hydrogel for DBM that can rapidly restore its structural integrity after damage based on amino-rich black phosphorus (BP) nanosheets and aldehyde-functionalized hyaluronic acid (AHA). Given the increased expression of bone morphogenetic protein (BMP) antagonists by DBM stimulation, the osteogenic potency of DBM in the hydrogel carrier was further enhanced by abrogating the BMP antagonism. The BP/AHA hydrogel provided dynamic polymer-nanosheet networks that combine injectability, modability, and physical stability with high DBM loading, where the BP nanosheets served as osteogenic cross-linkers to promote biomineralization and deliver siRNA to suppress undesirable expression of BMP antagonist noggin by DBM. As a result, the BP/AHA hydrogel integrated with DBM and noggin-targeting siRNA synergistically promoted osteogenic differentiation of mesenchymal stem cells by enhancing BMP/Smad signaling. This work demonstrates a promising strategy to improve the efficacy of bone regeneration using bone graft.

Polycaprolactone/β-Tricalcium Phosphate Composite Scaffolds with Advanced Pore Geometries Promote Human Mesenchymal Stromal Cells' Osteogenic Differentiation.

Critical-sized mandibular bone defects, arising from, for example, resections after tumor surgeries, are currently treated with autogenous bone grafts. This treatment is considered very invasive and is associated with limitations such as morbidity and graft resorption. Tissue engineering approaches propose to use 3D scaffolds that combine structural features, biomaterial properties, cells, and biomolecules to create biomimetic constructs. However, mimicking the complex anatomy and composition of the mandible poses a challenge in scaffold design. In our study, we evaluated the dual effect of complex pore geometry and material composition on the osteogenic potential of 3D printed scaffolds. The scaffolds were made of polycaprolactone (PCL) alone (TCP0), or with a high concentration of β-tricalcium phosphate (β-TCP) up to 40% w/w (TCP40), with two complex pore geometries, namely a star- (S) and a diamond-like (D) shape. Scanning electron microscopy and microcomputed tomography images confirmed high fidelity during the printing process. The D-scaffolds displayed higher compressive moduli than the corresponding S-scaffolds. TCP40 scaffolds in simulated body fluid showed deposition of minerals on the surface after 28 days. Subsequently, we assessed the differentiation of seeded bone marrow-derived human mesenchymal stromal cells (hMSCs) over 28 days. The early expression of RUNX2 in the cell nuclei confirmed the commitment toward an osteogenic phenotype. Moreover, alkaline phosphatase (ALP) activity and collagen deposition displayed an increasing trend in the D-scaffolds. Collagen type I was mainly present in the deposited extracellular matrix (ECM), confirming deposition of bone matrix. Finally, Alizarin Red staining showed successful mineralization on all the TCP40 samples, with higher values for the S-shaped scaffolds. Taken together, our study demonstrated that the complex pore architectures of scaffolds comprised TCP40 stimulated osteogenic differentiation and mineralization of hMSCs in vitro. Future research will aim to validate these findings in vivo.

Failure Rates Based on Alveolar Cleft Volume: An Analysis of the Critical-Sized Defect for Alveolar Bone Grafting.

Alveolar bone grafting (ABG) using iliac crest bone graft (ICBG) is best practice for children with complete cleft lip and palate. With the advent of recombinant human bone morphogenetic protein (rhBMP-2) and demineralized bone matrix (DBM), excellent results can still be achieved while avoiding donor-site morbidity. This study aims to determine the critical-sized defects by analyzing graft failure rates for ICBG and rhBMP-2/DBM to guide surgeons performing ABG. A retrospective review was conducted evaluating patients who underwent ABG from 2016-2022. Patients with preoperative and postoperative cone beam computed tomography (CBCT) imaging were included. Volumetric defect sizes were calculated using preoperative imaging. Graft success criteria were based on both clinical and radiographic outcomes. Logistic regressions analyzed graft failure rates to identify an optimal cutoff, which defined the critical-sized defect. Ninety-three patients were included. Bone graft cohorts included ICBG (n=30) and rhBMP-2/DBM (n=63). The critical-sized defects were calculated to be 810 mm 3 and 885 mm 3 for ICBG and rhBMP-2/DBM, respectively. There were significantly higher graft failure rates beyond the critical size compared to below for both ICBG (71.4% vs. 0.0%; p<0.001) and rhBMP-2/DBM (65.0% vs. 14.0%; p<0.001). This study identified critical-sized defects based on alveolar cleft volume for ICBG or rhBMP-2/DBM with higher graft failure rates beyond the predicted thresholds. Distinct ranges in cleft volume were identified where patients might benefit from each select graft option.

Enhanced bone regeneration with bioprinted GelMA/Bentonite scaffolds inspired by bone matrix

ABSTRACT In bone tissue engineering, the search for improved repair methods is crucial, given the drawbacks of traditional strategies like donor site issues and immune rejection. Addressing these challenges, this paper introduces an innovative GelMA/Bentonite composite bioink for 3D bioprinting, designed to create scaffolds that closely emulate native bone tissue. GelMA is selected for its biocompatibility and modifiable mechanics, while Bentonite's mineral richness and ion exchange capacity are harnessed to enhance scaffold structure and promote an osteogenic microenvironment. This research marks the inaugural incorporation of Bentonite into a bioink, a significant stride forward given its established safety in pharmaceuticals and versatility across industries. This bioink formulation signifies a breakthrough in bone tissue engineering, aiming to improve the osteointegration and regeneration of bone tissue. Combining Bentonite with GelMA marks a key step in creating bioinks that enhance bone healing, potentially transforming scaffold-based bone regeneration and pioneering the use of natural nanomaterials in medicine.

The treatment efficacy of bone tissue engineering strategy for repairing segmental bone defects under diabetic condition.

Diabetes mellitus is a systematic disease which exert detrimental effect on bone tissue. The repair and reconstruction of bone defects in diabetic patients still remain a major clinical challenge. This study aims to investigate the potential of bone tissue engineering approach to improve bone regeneration under diabetic condition. In the present study, decalcified bone matrix (DBM) scaffolds were seeded with allogenic fetal bone marrow-derived mesenchymal stem cells (BMSCs) and cultured in osteogenic induction medium to fabricate BMSC/DBM constructs. Then the BMSC/DBM constructs were implanted in both subcutaneous pouches and large femoral bone defects in diabetic (BMSC/DBM in DM group) and non-diabetic rats (BMSC/DBM in non-DM group), cell-free DBM scaffolds were implanted in diabetic rats to serve as the control group (DBM in DM group). X-ray, micro-CT and histological analyses were carried out to evaluate the bone regenerative potential of BMSC/DBM constructs under diabetic condition. In the rat subcutaneous implantation model, quantitative micro-CT analysis demonstrated that BMSC/DBM in DM group showed impaired bone regeneration activity compared with the BMSC/DBM in non-DM group (bone volume: 46 ± 4.4mm3 vs 58.9 ± 7.15mm3, *p < 0.05). In the rat femoral defect model, X-ray examination demonstrated that bone union was delayed in BMSC/DBM in DM group compared with BMSC/DBM in non-DM group. However, quantitative micro-CT analysis showed that after 6months of implantation, there was no significant difference in bone volume and bone density between the BMSC/DBM in DM group (199 ± 63mm3 and 593 ± 65mg HA/ccm) and the BMSC/DBM in non-DM group (211 ± 39mm3 and 608 ± 53mg HA/ccm). Our data suggested that BMSC/DBM constructs could repair large bone defects in diabetic rats, but with delayed healing process compared with non-diabetic rats. Our study suggest that biomaterial sacffolds seeded with allogenic fetal BMSCs represent a promising strategy to induce and improve bone regeneration under diabetic condition.