Bone-implant Contact Rate Research Articles

Alveolar Bone Microstructure Surrounding Orthodontic Anchor Screws with Plasma Surface Treatment in Rats.

A lateral load was applied to anchor screws that had undergone surface treatment, and the structure, cellular dynamics, and quality of the bone surrounding anchor screws were analyzed to investigate the effect of this surface treatment on the peri-implant jawbone. In addition, bone microstructural characteristics were quantitatively evaluated for each site of loading on the bone around the anchor screw. Rats were euthanized after observation on days 3, 5, or 7, and bone quality analyses were performed. Bone-implant contact rate increased more rapidly at an early stage in the treated surface group than in the untreated surface group. Bone lacuna morphometry showed that the measured values adjacent to the screw at the screw neck on the compressed side (A) and at the screw tip on the uncompressed side (D) were significantly lower than those at the screw tip on the compressed side (B) and at the screw neck on the uncompressed side (C). Collagen fiber bundle diameter showed that the measured values adjacent to regions A and D were significantly higher than those at regions B and C. Anchor screw surface activation facilitates initial bone contact of the screw, suggesting that early loading may be possible in clinical practice.

Polyetheretherketone implants with hierarchical porous structure for boosted osseointegration

BackgroundGood osseointegration is the key to the long-term stability of bone implants. Thermoplastic polyetheretherketone (PEEK) has been widely used in orthopedics; however, its inherent biological inertia causes fibrous tissue to wrap its surface, which leads to poor osseointegration and thus greatly limits its clinical applications.MethodsHerein, we developed a facile yet effective surface modification strategy. A commonly used sulfonation coupled with “cold pressing” treatment in the presence of porogenic agent formed a three-dimensional hierarchical porous structure on PEEK surface. Subsequently, the effects of porous surface on the in vitro adhesion, proliferation and differentiation of rat bone marrow-derived mesenchymal stem cells (BMSCs) were evaluated. Finally, the osteoinduction and osseointegration of surface-porous PEEK implant were examined in the rat distal femoral defect model.ResultsIn vitro results showed that the surface modification did not significantly affect the mechanical performance and cytocompatibility of PEEK substance, and the porous structure on the modified PEEK substrate provided space for cellular ingrowth and enhanced osteogenic differentiation and mineralization of BMSCs. In vivo tests demonstrated that the surface-porous PEEK implant could effectively promote new bone formation and had higher bone-implant contact rate, thereby achieving good bone integration with the surrounding host bone. In addition, this modification technique was also successfully demonstrated on a medical PEEK interbody fusion cage.ConclusionThe present study indicates that topological morphology plays a pivotal role in determining implant osseointegration and this facile and effective modification strategy developed by us is expected to achieve practical applications quickly.Graphical

Effect of photofunctionalization on titanium bone-implant integration in ovariectomized rats.

Osteoporosis is considered a risk factor for osseointegration during implant treatment. Photofunctionalization of titanium has been shown to improve bone-based cell adhesion, proliferation, and functional expression, increasing the bone-implant contact rate and bone-implant integration strength. This study aimed to test the hypothesis that photofunctionalization is effective for implant fixation using an osteoporosis rat model. In the biomechanical push-in test, the bone-implant integration strength of the photofunctionalization treatment group was 1.53 times that of the control group (p<0.05). These values implied that photofunctionalization restored the ovariectomy-induced low bone-implant integration strength to normal states. In the micro-CT analysis, the BV/TV of the photofunctionalization treatment group was 1.32 times that of the control group (p<0.05). These values implied that photofunctionalization restored the ovariectomy-induced low peri-implant bone formation to normal states. These results indicate that photofunctionalization treatment increased peri-implant bone formation and bone-implant integration strength in ovariectomized rats.

FEATURES OF BONE REMODELING AROUND SURFACE-MODIFIED TITANIUM AND TANTALUM IMPLANTS.

The aim: To study the osseointegrative properties of titanium and tantalum implants with different surface structures in animal experiments. Materials and methods: The histological and morphometric study was carried out on 60 male white rats after titanium implants with different surface structures made by 3D printed technology were inserted in the distal femur bone: presented by the multilayered layers of interlacing pores of 300 microns (series 1); rough (> 2 microns) (series 2); and tantalum implants with 300 microns pores and 80% porosity (series 3) as control material. Results: On the 30 days we found statistically significant differences in the bone-implant contact rate between the 2nd experiment series (44.77 ± 1.86)% and 1st (59.91 ± 2.86)% (p=0.000047) and 3rd (53.89 ± 2.11)% (р=0.000065), on the 90 days between the 2nd experiment series (51.26 ± 2.7)% and 1st (66.84 ± 2.63)% (p=0.000187) and 3rd (70.35 ± 4.32)% (p=0.000349). There was a difference between the indices of the bone-implant volume at day 90 between the 1st (48.43 ± 2.2)% and 2nd (36.88 ± 2.56)% series (p=0.000919), between the 2nd and 3rd series (51.2 ± 3.06)% (p=0.000107). There were no significant differences between the studied indices in the 1st and 3rd series of the experiment. Conclusions: Titanium implants with multilayered interlaced pore layers of 300 microns and tantalum with 300 microns pore size and 80% porosity may be promising. Rough-surface titanium also has osseointegrative qualities, but they are lower compared to other materials.

Effect of Photobiomodulation Therapy on Peri-Implant Bone Healing in Extra-Short Implants in a Rabbit Model: A Pilot Study.

Objective: To evaluate the effects of photobiomodulation therapy (PBMT) at distinct energy levels on peri-implant bone healing in extra-short implants in a experimental rabbit model. Background: The effect of PBMT on peri-implant bone healing in short implants remains unclear. This explored the effect of PBMT on extra-short implants in terms of bone-implant contact (BIC) length and rate, and implant stability quotient (ISQ). Methods: Fifteen white New Zealand rabbits were randomly divided into five groups. In all groups, extra-short implants (3.5 × 4 mm; Nucleoss T6, İzmir/Turkey) were placed in both tibias of the rabbits. PBMT was performed in four groups (group 1, 5 J/cm2; group 2, 10 J/cm2; group 3, 20 J/cm2; and group 4, 25 J/cm2); no PBMT was performed in the control group. On the 30th day, the rabbits were sacrificed and peri-implant tissue samples were obtained to determine the BIC length and BIC rate. Implant stability levels were measured by resonance frequency analysis using the Osstell penguin device and were determined as ISQ values on the 1st and 30th days of the study. Results: PBMT significantly increased the BIC length and BIC rate in groups 3 and 4 (p < 0.001). For the ISQ values, there were significant differences between the 1st and 30th day (p < 0.001). On the 30th day, the ISQ values were significantly higher in groups 3 and 4 compared with the remaining groups (p < 0.001). Conclusions: In this study, PBMT improved peri-implant bone healing through increase in BIC length, BIC rate, and ISQ parameter values in extra-short implants.

Glimepiride Loaded Poly(D,L-lactide-co-glycolide) Microspheres Improve Osseointegration of Dental Implants in Type 2 Diabetic Rats

The patients with type 2 diabetes mellitus (T2DM) have high dental implant failure frequency. This study explores the function of glimepiride local delivery on dental implant osseointegration in diabetes animal. Glimepiride loaded PLGA microspheres were loaded on the surface of the dental implant, and transplanted into ten Goto-Kakizaki (GK) rats. Blood sugar level and Implant Stability Quotient (ISQ) were measured every week after surgery. Histological, osseointegration rate and bone-implant contact (BIC) rate analysis were performed to evaluate dental osseointegration. The results showed that Glimepiride loaded Poly-lactide-co-glycolide (PLGA) microspheres have sustained-release curve. The glimepiride group exhibited greater ISQ than the control group. The BIC rate of the control and glimepiride group was 44.60%±1.95% and 59.80%±1.79%, respectively. This study demonstrated that the glimepiride group has a significantly greater osseointegration rate than that of the control group. Thus, Glimepiride could provide an alternative drug release microspheres for enhance the dental implant osseointegration in diabetes patients.

Strontium-Loaded Nanotubes of Ti-24Nb-4Zr-8Sn Alloys for Biomedical Implantation.

Ti-24Nb-4Zr-8Sn (Ti2448) alloys, with a relatively low elastic modulus and unique mechanical properties, are desirable materials for oral implantation. In the current study, a multifaceted strontium-incorporating nanotube coating was fabricated on a Ti2448 alloy (Ti2-NTSr) through anodization and hydrothermal procedures. In vitro, the Ti2-NTSr specimens demonstrated better osteogenic properties and more favorable osteoimmunomodulatory abilities. Moreover, macrophages on Ti2-NTSr specimens could improve the recruitment and osteogenic differentiation of osteoblasts. In vivo, dense clots with highly branched, thin fibrins and small pores existed on the Ti2-NTSr implant in the early stage after surgery. Analysis of the deposition of Ca and P elements, hard tissue slices and the bone-implant contact rate (BIC%) of the Ti2-NTSr implants also showed superior osseointegration. Taken together, these results demonstrate that the Ti2-NTSr coating may maximize the clinical outcomes of Ti2448 alloys for implantation applications.

Selective laser melted titanium implants play a positive role in early osseointegration in type 2 diabetes mellitus rats.

Success of dental implant is associated with the surface modification. To evaluate whether the selective laser melting-superfinished titanium (Ti6Al4V) implants have a better early osseointegration in type 2 diabetes mellitus rats compare to pure titanium implants and acid-etched treated (SLA) implants, we designed a screw-shaped implant which was batch-fabricated by selective laser melting (SLM). Then the implants were randomly inserted in tibias of rats with type 2 diabetes mellitus (T2DM). After surgical operation, the SLM group showed the best bone formation around the implants with the highest bone-implant contact rate among the three groups.Removal torque tests and histomorphological analyses all revealed a stronger connection between the bone because its good surface characteristics and mechanical properties. SLM implant may be a novel implant for T2DM patients.

Photo-activated implants: a triple-blinded, split-mouth, randomized controlled clinical trial on the resistance to removal torque at various healing intervals.

Hydrophilic implant surfaces promote faster osseointegration of dental implants with a higher bone-implant contact (BIC) rate. Animal and in vitro studies proved that ultraviolet (UV) irradiation of titanium implants regains hydrophilicity. Clinical impact is still unclear. The objective of this RCT was to assess the removal torque (RT) required to unfix a surface-treated implant (test group) versus the original surface implant (control group) performed at various points in time. The null hypothesis stated that test and control implants will show the same deliberation force at specific time points. One hundred eighty partially edentulous patients were randomly assigned to six groups. In single-stage surgery, each patient received one test and one control implant. In total, 180 test and 180 control implants were placed epicrestally. Test implants received a surface treatment with UV irradiation prior to insertion, in order to reduce carbon and enhance hydrophilicity and thus wettability. Maximum RT values for test and control implants were recorded with a torque measuring device at implant placement (T1), after 1 (group 1), 2 (group 2), 3 (group 3), 4 (group 4), 6 (group 5) (T2), and 8weeks (group 6) of healing. Subsequently, implants were returned to their original position for the continuation of the healing process. No implant was lost. Age, gender, smoking, implant position, and bone quality could be excluded as confounding factors because of the lack of statistical significance. At T2, RT values were higher for test implants compared with those for control implants, being statistically significant in groups 2, 3, 4, and 6 (p < 0.05). Our data support rejection of the null hypothesis. Photo-activation of the surface of titanium implants leads to higher resistance to RT forces compared with that of non-treated implants, indicating improved healing and implant stability especially in the early healing phase.

Effects of capsaicin-induced sensory denervation on early implant osseointegration in adult rats.

The presence of nerve endings around implants is well-known, but the interaction between the peripheral nervous system and the osseointegration of implants has not been thoroughly elucidated to date. The purpose of this study was to test the effects of selective sensory denervation on early implant osseointegration. Forty male Sprague-Dawley rats were divided randomly into two groups, group A and group B, and they were treated with capsaicin and normal saline, respectively. One week later, titanium implants were placed in the bilateral femurs of the rats. Three and six weeks after implantation, histological examination, microcomputed tomography and biomechanical testing were performed to observe the effect of sensory denervation on implant osseointegration. At three weeks and six weeks, bone area, trabecular bone volume/total bone volume and bone density were significantly lower in group A than in group B. Similarly, the bone–implant contact rate, trabecular number and trabecular thickness were clearly lower in group A than in group B at three weeks. However, the trabecular separation spacing in group A was greater than that in group B at both time points. Biomechanical testing revealed that the implant-bone binding ability of group A was significantly lower than that in group B. The research demonstrated that sensory innervation played an important role in the formation of osseointegration. Selective-sensory denervation could reduce osseointegration and lower the binding force of the bone and the implant.

The Surface Anodization of Titanium Dental Implants Improves Blood Clot Formation Followed by Osseointegration

The anodization of titanium dental implant influences the biologic processes of osseointegration. 34 grit-blasted and acid-etched titanium specimens were used to evaluate micro- and nano-roughness (Ra), contact angle (θ) and blood clot extension (bce). 17 samples were anodized (test) while the remaining were used as control. The bce, was measured using 10 µL of human blood left in contact with titanium for 5 min at room temperature. The micro- and nano-scale Ra were measured under CLSM and AFM, respectively, while the θ was analyzed using the sessile drop technique. The bone-implant contact (BIC) rate was measured on two narrow implants retrieved for fracture. bce was 42.5 (±22) for test and 26.6% (±13)% for control group (p = 0.049). The micro-Ra was 6.0 (±1.5) for the test and 5.8 (±1.8) µm for control group (p &gt; 0.05). The θ was 98.5° (±18.7°) for test and 103° (±15.2°) for control group (p &gt; 0.05). The nano-Ra was 286 (±40) for the test and 226 (±40) nm for control group (p &lt; 0.05). The BIC rate was 52.5 (±2.1) for test and 34.5% (±2.1%) for control implant (p = 0.014). (Conclusions) The titanium anodized surface significantly increases blood clot retention, significantly increases nano-roughness, and favors osseointegration. When placing dental implants in poor bone quality sites or with immediate loading protocol anodized Ti6Al4V dental implants should be preferred.

Long-term in vivo evolution of high-purity Mg screw degradation — Local and systemic effects of Mg degradation products

Magnesium (Mg) based materials are the focus of research for use as degradable materials in orthopedics and cranio-maxillofacial surgery. However, corrosion rate control and biosecurity are still the key issues that need to be solved prior to their clinical applications. In the present study, as-rolled high-purity magnesium (HP Mg, 99.99 wt%) screws were implanted in rabbit tibiae for up to 52 weeks in order to investigate their long-term in vivo degradation and the local and systemic effects of their degradation products. A series of long-term monitoring were performed at various time points (4w, 12w, 26w and 52w) after implantation using numerous investigations such as micro-CT assay, histomorphometric analysis, local micro-environment testing and biochemical analysis of serum and urine. It was revealed that HP Mg screws had a uniform degradation morphology and a slow degradation rate in vivo during the period of 52 weeks. Their degradation products not only increased the local pH values but also changed the local Mg2+ ions concentration and gas cavity area in the peri-implant tissues in a dynamic manner. More importantly, both the new bone formation and bone-implant contact rate were increased at bone-implant interfaces at 26 weeks and 52 weeks post-implantation. Furthermore, neither abnormal elevation of serum magnesium and urine magnesium level, nor liver and kidney dysfunction were detected during the monitoring period of 26 weeks. All these results of long-term investigation suggest that HP Mg screws possess a slow degradation rate, desirable bone repair capacity and long-term local/systemic biosafety, and consequently may have good potential for application as bone fixation devices. Statement of significanceThe corrosion resistance control and biosecurity issues of Mg alloys limited their clinical applications in some extent. Mg purification is another effective way to improve corrosion resistance of Mg-based materials. However, the long-term in vivo degradation of high-purity magnesium (HP Mg) and the local and systemic effects of its degradation products have not been fully investigated yet, which are the key factors to determine the clinical application prospect of HP Mg. Especially the changes in peri-implant microenvironment may greatly influence the local physiological response and bone repair. In this study, the long-term evolution tendency of in vivo degradation behavior of HP Mg screws was discovered from the view of space-time. Furthermore, not only the dynamic changes of local microenvironment and the long-term evolution process of bone repair, but also the dynamic systemic responses were systematically revealed. Conclusions of this study may help us to further understand the long-term in vivo evolution of HP Mg degradation and the local/systemic effects of its degradation products and help to guide the design of biodegradable bone fixation material.

Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials

ObjectiveThis study examined the in vitro and in vivo response of osteoblasts to a novel, acid-etched and sandblasted zirconia surface. MethodsOsteoblastic hFOB 1.19 cells were cultured either on electrochemically anodized titanium (TiUnite®), machined titanium (Ti-m), sandblasted and acid-etched zirconia (TZP-proc), and machined zirconia (TZP-A-m). The surface topography of the various substrates was analyzed by 3D laserscan measurements and scanning electron microscopy. At culture days 1, 3, 7, 14, 21, and 28, cell proliferation was determined. Gene expression was analyzed using RT-PCR. Histologic analysis and biomechanical testing was performed on miniature implants placed in the rat femur. ResultsDuring the first 7 days, a retarded cell proliferation was observed on the TiUnite® surface. After 28 days of cultivation, cell proliferation reached similar levels on all surfaces. An up-regulation of bone and extracellular matrix specific genes could be seen for TZP-proc at day 21. The mean bone-implant contact rate after a healing period of 14 and 28 days, respectively, was higher for TiUnite® than for TZP-proc. At 28 day, the biomechanical test showed significantly higher values for TiUnite® than for all other surfaces. SignificanceThe novel, rough zirconia surface was accepted by hFOB 1.19 cells and integrates into rat bone tissue. However, osseointegration seemed to proceed more slowly and to a lesser extent compared to a moderately roughened titanium surface.

In vitro and in vivo evaluation of zinc-modified ca-si-based ceramic coating for bone implants.

The host response to calcium silicate ceramic coatings is not always favorable because of their high dissolution rates, leading to high pH within the surrounding physiological environment. Recently, a zinc-incorporated calcium silicate-based ceramic Ca2ZnSi2O7 coating, developed on a Ti-6Al-4V substrate using plasma-spray technology, was found to exhibit improved chemical stability and biocompatibility. This study aimed to investigate and compare the in vitro response of osteoblastic MC3T3-E1 cells cultured on Ca2ZnSi2O7 coating, CaSiO3 coating, and uncoated Ti-6Al-4V titanium control at cellular and molecular level. Our results showed Ca2ZnSi2O7 coating enhanced MC3T3-E1 cell attachment, proliferation, and differentiation compared to CaSiO3 coating and control. In addition, Ca2ZnSi2O7 coating increased mRNA levels of osteoblast-related genes (alkaline phosphatase, procollagen α1(I), osteocalcin), insulin-like growth factor-I (IGF-I), and transforming growth factor-β1 (TGF-β1). The in vivo osteoconductive properties of Ca2ZnSi2O7 coating, compared to CaSiO3 coating and control, was investigated using a rabbit femur defect model. Histological and histomorphometrical analysis demonstrated new bone formation in direct contact with the Ca2ZnSi2O7 coating surface in absence of fibrous tissue and higher bone-implant contact rate (BIC) in the Ca2ZnSi2O7 coating group, indicating better biocompatibility and faster osseointegration than CaSiO3 coated and control implants. These results indicate Ca2ZnSi2O7 coated implants have applications in bone tissue regeneration, since they are biocompatible and able to osseointegrate with host bone.

Accelerated and Enhanced Bone Formation on Novel Simvastatin‐Loaded Porous Titanium Oxide Surfaces

With increasing application of dental implants in poor-quality bones, the need for implant surfaces ensuring accelerated osseointegration and enhanced peri-implant bone regeneration is increased. A study was performed to evaluate the osseointegration and bone formation on novel simvastatin-loaded porous titanium oxide surface. Titanium screws were treated by micro-arc oxidation to form porous oxide surface and 25 or 50 μg of simvastatin was loaded. The nontreated control, micro-arc oxidized, and simvastatin-loaded titanium screws were surgically implanted into the proximal tibia of 16-week-old male Wistar rats (n = 36). Peri-implant bone volume, bone-implant contact, and mineral apposition rates were measured at 2 and 4 weeks. Data were analyzed by one-way analysis of variance followed by Tukey's post hoc test. New bone was formed directly on the implant surface in the bone marrow cavity in simvastatin-loaded groups since 2 weeks. Bone-implant contact values were significantly higher in simvastatin-loaded groups than control and micro-arc oxidized groups at both time points (p < .05). Peri-implant bone volume and mineral apposition rate of simvastatin-loaded groups were significantly higher than control and micro-arc oxidized groups at 2 weeks (p < .05). These data suggested that simvastatin-loaded porous titanium oxide surface provides faster osseointegration and peri-implant bone formation and it would be potentially applicable in poor-quality bones.

Bone Healing with or without Platelet‐Rich Plasma around Four Different Dental Implant Surfaces in Beagle Dogs

Surface development is one of the major aims in dental implant engineering. Additive application of substances could possibly improve the new bone formation around dental implants. The present study evaluated the bone reaction on four different implant surfaces with or without platelet-rich plasma (PRP). Four self-tapping titanium screw implants (Brånemark MK III [Nobel Biocare, Göteborg, Sweden], Osseotite [3i, Miami, FL, USA], Xive [Densply Friadent, Mannheim, Germany], and Compress [IGfZ eG, Diez, Germany]) with different surfaces were inserted in each hemimandible of 12 female beagle dogs; the implant positions and the application of PRP were randomized. After intravital fluorochrome staining, sacrifices and biopsies harvesting were performed after 6 weeks (five dogs; one dog died before) and 12 weeks (six dogs) and the respective specimens were analyzed. The only significant difference in bone remodeling was found for the Compress implants with increased bone formation compared with the Brånemark implants at 12 weeks (sign test, p = .03). Comparing the histological and histomorphometric specimens of all other implant surfaces with respect to peri-implant bone remodeling and the resulting bone-implant contact rates (BICRs), no statistically significant differences were seen in the PRP or non-PRP groups (sign test, all p values ≥ .063). This study found no significant differences in the BICR for roughened implant surfaces compared with machined surfaces. In this animal model, the addition of PRP did not demonstrate evidence of faster bone formation or the resulting BICR.

Biologic stability of plasma ion-implanted miniscrews

ObjectiveTo gain basic information regarding the biologic stability of plasma ion-implanted miniscrews and their potential clinical applications.MethodsSixteen plasma ion-implanted and 16 sandblasted and acid-etched (SLA) miniscrews were bilaterally inserted in the mandibles of 4 beagles (2 miniscrews of each type per quadrant). Then, 250 - 300 gm of force from Ni-Ti coil springs was applied for 2 different periods: 12 weeks on one side and 3 weeks contralaterally. Thereafter, the animals were sacrificed and mandibular specimens including the miniscrews were collected. The insertion torque and mobility were compared between the groups. The bone-implant contact and bone volume ratio were calculated within 800 µm of the miniscrews and compared between the loading periods. The number of osteoblasts was also quantified. The measurements were expressed as percentages and analyzed by independent t-tests (p < 0.05).ResultsNo significant differences in any of the analyzed parameters were noted between the groups.ConclusionsThe preliminary findings indicate that plasma ion-implanted miniscrews have similar biologic characteristics to SLA miniscrews in terms of insertion torque, mobility, bone-implant contact rate, and bone volume rate.

Construction of microenvironment onto titanium substrates to regulate the osteoblastic differentiation of bone marrow stromal cellsin vitroand osteogenesisin vivo

To mimic the extracellular matrix of natural bone, apatite/gelatin composite was deposited onto nanostructured titanium substrates via a coprecipitation method, which was pretreated by potassium hydroxide and heat treatment to generate an anticorrosive nanostructured layer. The successful formation of the apatite/gelatin nanocomposite onto titanium surfaces was revealed by Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, atomic force microscopy (AFM), and thin film X-ray diffraction (TF-XRD) measurements, respectively. The immunofluorescence staining of vinculin revealed that the apatite/gelatin nanocomposite deposited titanium substrate was favorable for cell adhesion. More importantly, bone marrow stromal cells cultured onto the apatite/gelatin nanocomposite deposited titanium substrates displayed significantly higher (p < 0.05 or p < 0.01) proliferation and differentiation levels of alkaline phosphatase, mRNA expressions of osteocalcin (OC), osteopontin (OPN), and collagen type I (Col I), and OC content after culture for 7, 14, and 21 days, respectively, which was also revealed by the immunofluorescence analysis of OC and OPN expression. The deposition of apatite/gelatin nanocomposite improved bone density (p < 0.05) and bone-implant contact rate (p < 0.05), which was reflected by microcomputed tomography analysis and histological evaluation in vivo using a rabbit model. This work provides an approach to fabricate high-performance titanium-based implants with enhanced bone osseointegration.

Effect of osteoblast cell culture on the bone implant contact

Purpose. The aim of this study is to acquire an ideal bone implant contact under the cover of osteogenic effect of osteoblasts derived from Mesenchymal Stem Cells (MSCs). Materials and methods. Thirty dental implants were used for this study. Implants were placed in sheep mandibles and defects were created 4 mm coronally in the dental implants. These defects were filled with Platelet Rich Plasma (PRP) in one group and with PRP + Osteoblast Cell Culture (OCC) in another group. No procedure was conducted on the control group defects (empty defect group). Eight weeks later, osseointegration was investigated with Bone Implant Contact (BIC) measurements histomorphologically. Data were checked statistically. Results. The variation of BIC rates between Empty Defect Group and PRP groups was significant (p <0.05). The BIC rate of the PRP group was higher than that of the Empty Defect Group. The variation of BIC rates between Empty Defect Group and PRP + OCC groups was significant (p <0.05). The BIC rate of the PRP + OCC group was higher than that of the Empty Defect Group. The variation of BIC rates between PRP and PRP + MSC groups was significant (p<0.05). The BIC rate of the PRP + OCC group was higher than that of the PRP group. At the end of the 8-week healing period, it was observed that the percentage of BIC was highest in the PRP + OCC group. Conclusions. Implant–bone connection was better in the OCC−PRP group compared with the PRP group and the empty defect group. The use of OCC-PRP combination was effective on healing. The BIC value was increased significantly by OCC.

Effects of local delivery of bFGF from PLGA microspheres on osseointegration around implants in diabetic rats

Diabetes mellitus may impair bone healing after dental implant placement. The objective of this study was to evaluate the effects of the local delivery of basic fibroblast growth factor (bFGF) from poly(lactide-co-glycolide) (PLGA) microspheres on osseointegration around titanium implants in diabetic rats. The bFGF-PLGA microspheres were prepared by the W/O/W double-emulsion solvent evaporation method. A total of 20 rats were used to create diabetic animal models by giving them a high-fat and high-sugar diet and a low-dose streptozotocin intraperitoneal injection. Titanium implants were planted into the tibias of the diabetic rats and into 10 normal rats. Microspheres were loaded on the surfaces of the implants in the bFGF intervention group before they were placed into the rats. After 4 or 8 weeks, the tibias containing the implants were removed and embedded with resin. Uncalcified tissue slices were prepared to compare osseointegration. At 4 weeks, the bone-implant contact rate in the diabetic control group was less than that in the control group and the bFGF intervention group (P < .05). At 8 weeks, the results among the 3 groups were similar to those at 4 weeks. The local delivery of bFGF from PLGA microspheres into areas around titanium implants may improve osseointegration in diabetic rats.