Bond-forming Reductive Elimination Research Articles

Catalytically Relevant Organocopper(III) Complexes Formed through Aryl-Radical-Enabled Oxidative Addition.

Stepwise oxidative addition of copper(I) complexes to form copper(III) species via single electron transfer (SET) events has been widely proposed in copper catalysis. However, direct observation and detailed investigation of these fundamental steps remain elusive owing largely to the typically slow oxidative addition rate of copper(I) complexes and the instability of the copper(III) species. We report herein a novel aryl-radical-enabled stepwise oxidative addition pathway that allows for the formation of well-defined alkyl-CuIII species from CuI complexes. The process is enabled by the SET from a CuI species to an aryl diazonium salt to form a CuII species and an aryl radical. Subsequent iodine abstraction from an alkyl iodide by the aryl radical affords an alkyl radical, which then reacts with the CuII species to form the alkyl-CuIII complex. The structure of resultant [(bpy)CuIII(CF3)2(alkyl)] complexes has been characterized by NMR spectroscopy and X-ray crystallography. Competition experiments have revealed that the rate at which different alkyl iodides undergo oxidative addition is consistent with the rate of iodine abstraction by carbon-centered radicals. The CuII intermediate formed during the SET process has been identified as a four-coordinate complex, [CuII(CH3CN)2(CF3)2], through electronic paramagnetic resonance (EPR) studies. The catalytic relevance of the high-valent organo-CuIII has been demonstrated by the C-C bond-forming reductive elimination reactivity. Finally, localized orbital bonding analysis of these formal CuIII complexes indicates inverted ligand fields in σ(Cu-CH2) bonds. These results demonstrate the stepwise oxidative addition in copper catalysis and provide a general strategy to investigate the elusive formal CuIII complexes.

Enantioenriched Allylesters via a Copper-Catalyzed Diene Carboesterification with Alkyltrifluoroborates and Carboxylic Acids.

The rapid synthesis of a range of enantioenriched allylic esters is enabled by a new 3-component catalytic enantioselective 1,2-carboesterification of readily available dienes with carboxylic acids and potassium alkyltrifluoroborates. The chiral copper catalyst, formed in situ from Cu(OTf)2 and (4S,4'S)-2,2'-(cyclopentane-1,1-diyl)bis(4-phenyl-4,5-dihydrooxazole), is implicated in both the generation of alkyl radicals from the alkyltrifluoroborates as well as the enantioselective formation of C-O bonds. Potassium salts of primary and secondary alkyltrifluoroborates as well as several benzylic trifluoroborates, tert-butyltrifluoroborate, and phenyltrifluoroborate participate in the reaction. The regioselectivity and enantioselectivity are strongly impacted by variations in all of the reaction components, which in turn are thought to impact the C-O bond-forming reductive elimination from a [Cu(III)] intermediate.

Copper-catalysed electrophilic carboamination of terminal alkynes with benzyne looked at through the computational lens.

A detailed computational mechanistic study of the copper-catalysed three-component-type electrophilic carboamination of terminal alkynes with benzyne and an archetypal O-benzoylhydroxylamine electrophile is presented. Probing various plausible pathways for relevant elementary steps and scrutinising performance degradation pathways, with the aid of a reliable computational protocol applied to a realistic catalyst model combined with kinetic analysis, identified the pathways preferably traversed in productive catalysis. It entails rapid alkynylcupration of in situ generated benzyne to deliver the arylcopper nucleophile that undergoes amination with the O-benzoylhydroxylamine electrophile to afford copper benzoate. Umpolung-enabled electrophilic amination favours a multistep SN2-type oxidative addition/N-C bond-forming reductive elimination sequence involving a short-lived formal {P^P}CuIII carboxylate amido aryl intermediate. SN2-type displacement of the benzoate leaving group at the arylcopper nucleophile, which represents the catalyst resting state, is predicted to be the turnover limiting step. Alkynolysis transforms copper benzoate back to catalytically competent alkynylcopper. The computational probe of a wider range of substrates reveals that only severely ring-strained C6-arynes, C6-cycloalkynes and electron-deficient cyclopropenes featuring a highly reactive C≡C linkage could replace benzyne. Moreover, strict control of stationary benzyne concentration is indispensable for electrophilic carboamination to ever become achievable.

Oxidative addition of an alkyl halide to form a stable Cu(III) product.

The step that cleaves the carbon-halogen bond in copper-catalyzed cross-coupling reactions remains ill defined because of the multiple redox manifolds available to copper and the instability of the high-valent copper product formed. We report the oxidative addition of α-haloacetonitrile to ionic and neutral copper(I) complexes to form previously elusive but here fully characterized copper(III) complexes. The stability of these complexes stems from the strong Cu-CF3 bond and the high barrier for C(CF3)-C(CH2CN) bond-forming reductive elimination. The mechanistic studies we performed suggest that oxidative addition to ionic and neutral copper(I) complexes proceeds by means of two different pathways: an SN2-type substitution to the ionic complex and a halogen-atom transfer to the neutral complex. We observed a pronounced ligand acceleration of the oxidative addition, which correlates with that observed in the copper-catalyzed couplings of azoles, amines, or alkynes with alkyl electrophiles.

Characterization and Reactivity of Copper(II) and Copper(III) σ-Aryl Intermediates in Aminoquinoline-Directed C-H Functionalization.

Over the past decade, numerous reports have focused on the development and applications of Cu-mediated C-H functionalization reactions; however, to date, little is known about the Cu intermediates involved in these transformations. This paper details the observation and characterization of CuII and CuIII intermediates in aminoquinoline-directed C(sp2)-H functionalization of a fluoroarene substrate. An initial C(sp2)-H activation at CuII occurs at room temperature to afford an isolable anionic cyclometalated CuII complex. This complex undergoes single-electron oxidation with ferrocenium or AgI salts under mild conditions (5 min at room temperature) to afford C(sp2)-C(sp2) or C(sp2)-NO2 coupling products. Spectroscopic studies implicate the formation of a transient diamagnetic CuIII-σ-aryl intermediate that undergoes either (i) a second C(sp2)-H activation at CuIII followed by C-C bond-forming reductive elimination or (ii) reaction with a NO2- nucleophile and C(sp2)-NO2 coupling.

Diverting the 5-exo-Trig Oxypalladation to Formally 6-endo-Trig Fluorocycloetherification Product through 1,2-O/Pd(IV) Dyotropic Rearrangement.

Pd-catalyzed cyclizative functionalization of γ-hydroxyalkenes affords tetrahydrofuran derivatives via a key 5-exo-trig oxypalladation step. Herein, we report a palladium(II)-catalyzed, Selectfluor-mediated formal 6-endo-trig fluorocycloetherification of γ-hydroxyalkenes for the synthesis of functionalized tetrahydropyrans. Mechanistically, an σ-alkyl-Pd(II) intermediate resulting from the 5-exo-trig oxypalladation process is isolated and characterized by X-ray crystallographic analysis. Its oxidation with Selectfluor to Pd(IV) triggers the chemoselective 1,2-O/Pd(IV) dyotropic rearrangement affording, after C-F bond-forming reductive elimination, the tetrahydropyrans with concurrent generation of a tertiary carbon-fluorine bond. The occurrence of this 1,2-positional interchange is further evidenced by trapping the rearranged quaternary C(sp3)-Pd bond by an internal nucleophile that is materialized by the development of a Pd(II)-catalyzed oxidative bis-heterocyclization of alkenes.

CS-Symmetric Pyridine(diimine) Iron Methyl Complexes for Catalytic [2+2] Cycloaddition and Hydrovinylation: Metallacycle Geometry Determines Selectivity.

A series of CS-symmetric (aryl,alkyl)-substituted pyridine(dimine) iron methyl (CyARPDI)FeCH3 complexes have been prepared, characterized, and evaluated as precatalysts for the [2+2]-cycloaddition of butadiene and ethylene. Mixtures of vinylcyclobutane and (Z)-hexa-1,4-diene were observed in each case. By comparison, C2v-symmetric, arylated (PDI) iron catalysts are exclusively selective for reversible [2+2]-cycloaddition to yield vinylcyclobutane. The alteration in the chemoselectivity of the catalytic reaction was investigated through a combination of precatalyst stability studies, identification of catalytic resting state(s), and 2H and 13C isotopic labeling experiments. While replacement of an aryl-imine substituent with an N-alkyl group decreases the stability of the formally iron(0) dinitrogen and butadiene complexes, two diamagnetic metallacycles were identified as catalyst resting states. Deuterium labeling and NOESY/EXSY NMR experiments support 1,4-hexadiene arising from catalytic hydrovinylation involving reversible oxidative cyclization leading to accessible cis-metallacycle. Cyclobutane formation proceeds by irreversible C(sp3)-C(sp3) bond-forming reductive elimination from a trans-metallacycle. These studies provide key mechanistic understanding into the high selectivity of bis(arylated) pyridine(diimine) iron catalysts for [2+2]-cycloaddition, unique, thus far, to this class of iron catalysts.

Mechanism-Driven Development of Group 10 Metal-Catalyzed Decarbonylative Coupling Reactions.

Transition-metal-catalyzed cross-coupling reactions are widely used in both academia and industry for the construction of carbon-carbon and carbon-heteroatom bonds. The vast majority of cross-coupling reactions utilize aryl (pseudo)halides as the electrophilic coupling partner. Carboxylic acid derivatives (RC(O)X) represent a complementary class of electrophiles that can engage in decarbonylative couplings to produce analogous products. This decarbonylative approach offers the advantage that RC(O)X are abundant and inexpensive. In addition, decarbonylative coupling enables both intramolecular (between R and X of the carboxylic acid derivative) as well as intermolecular bond-forming reactions (in which an exogeneous nucleophile is coupled with the R group derived from RC(O)X). In these intermolecular reactions, the X-substituent on the carboxylic acid can be tuned to facilitate both oxidative addition and transmetalation, thus eliminating the need for an exogeneous base. This Account details our group's development of a diverse variety of base-free decarbonylative coupling reactions catalyzed by group 10 metals. Furthermore, it highlights how catalyst design can be guided by stoichiometric organometallic studies of these systems.Our early studies focused on intramolecular decarbonylative couplings that transform RC(O)X to the corresponding R-X with extrusion of CO. We first identified Pd and Ni monodentate phosphine catalysts that convert aryl thioesters (ArC(O)SR) to the corresponding thioethers (ArSR). We next expanded this reactivity to fluoroalkyl thioesters, using readily available fluoroalkyl carboxylic acids as the fluoroalkyl (RF) source. A Ni-phosphinoferrocene catalyst proved optimal, and the large bite angle bidentate ligand was necessary to promote the challenging RF-S bond-forming reductive elimination step.We next pursued intramolecular decarbonylative couplings of aroyl halides. Palladium-based catalysts bearing dialkylbiaryl ligands (e.g., BrettPhos) were identified as optimal for converting aroyl chlorides (ArC(O)Cl) to aryl chlorides (ArCl). These ligands were selected based on their ability to facilitate the key C-Cl bond-forming reductive elimination step of the catalytic cycle. In contrast, all attempts to convert aroyl fluorides [ArC(O)F)] to aryl fluorides (ArF) were unsuccessful with either Pd- or Ni-based catalysts. Organometallic studies of the Ni-system show that C(O)-F oxidative addition and CO deinsertion proceed smoothly, but the resulting nickel(II) aryl fluoride intermediate fails to undergo C-F bond-forming reductive elimination.In contrast to its inertness to reductive elimination, this nickel(II) aryl fluoride proved highly reactive toward transmetalation. The fluoride ligand serves as an internal base, such that no additional base is required. We leveraged this "transmetalation active" intermediate to achieve base-free Ni-catalyzed intermolecular decarbonylative coupling reactions between aroyl fluorides and boron reagents to access both biaryl and aryl-boronate ester products. By tuning the electrophile, transmetalating reagent, and catalyst, this same approach also proved applicable to base-free intermolecular decarbonylative fluoroalkylation (between difluoromethylacetyl fluoride and arylboronate esters) and aryl amination (between phenol esters and silyl amines).Moving forward, a key goal is to identify catalyst systems that enable more challenging bond constructions via this manifold. In addition, CO inhibition remains a major issue leading to the requirement for high temperatures and high catalyst loadings. Identifying catalysts that are resistant to CO binding and/or approaches to remove CO under mild conditions will be critical for making these reactions more practical and scalable.

Theoretical study on Rh(III)-catalyzed reaction of allenylsilanes with N-methoxybenzamides

The reaction mechanism of the Rh(III)-catalyzed C−H functionalization of N-methoxybenzamides with allenes have been computationally investigated by employing density functional theory (DFT) calculations. Two reaction mechanisms have been calculated. The reaction mechanism involving β‒H elimination first followed by protonation is calculated to be preferred to the one in which protonation occurs first followed by β‒H elimination. The catalytic cycle consists of seven major processes: N‒H deprotonation, C‒H activation, alkene insertion, β‒H elimination and, N‒H bond-forming reductive elimination, MeOH elimination, and N‒H bond-forming oxidative addition. The C(sp2)‒H activation is the rate-determining transition state with a free energy barrier of 19.5 kcal/mol. The electronic effect could account for the observed regioselectivity. In addition, the reaction mechanisms for the formation of other side products have been calculated and compared.

Nickel(IV) Intermediates in Aminoquinoline-Directed C(sp2)-C(sp3) Coupling.

We use a ligand design strategy to isolate a cyclometalated nickel(IV) complex that is directly analogous to a key intermediate proposed in aminoquinoline-directed C-H functionalization catalysis. This nickel(IV) complex is formed by oxidative addition of a diaryliodonium reagent to an anionic nickel(II)-picolinate precursor. The nickel(IV) σ-aryl complex is stable at room temperature but undergoes C(sp2)-C(sp3) bond-forming reductive elimination under mild conditions (70 °C, 120 min). Overall, this study demonstrates the accessibility of long-sought-after nickel(IV) intermediates in C-H functionalization catalysis. Furthermore, it demonstrates that LX-type (bidentate, mono-anionic) ligands such as picolinate dramatically stabilize these nickel(IV) species.

A Mechanistic Study of the Cobalt(I)-Catalyzed Amination of Aryl Halides: Effects of Metal and Ligand.

Transition-metal-catalyzed amination of aryl halides is a useful approach for the synthesis of medicinal compounds, organic functional materials, and agrochemical compounds. A systematic DFT study has been performed to investigate the mechanism of the Co(I)-catalyzed amination of aryl halides by LiN(SiMe3)2 using (PPh3)3CoCl as the precatalyst. Our computational results suggest that the most favorable dissociative concerted C-I activation pathway in a triplet state consists of (a) dissociation of one PPh3 ligand, (b) concerted oxidative addition (OA) of the C-I bond, (c) transmetalation, (d) (optional) dissociation of the second PPh3 ligand, (e) C-N bond-forming reductive elimination (RE), and (f) ligand exchange to regenerate the active species. Comparatively, the associative concerted OA, radical, SH2/SN2, single electron transfer (SET), and σ-bond metathesis pathways should be less favorable due to their higher barriers or unfavorable reaction free energies. The effects of different metals (Rh and Ir) as centers in the catalyst were further examined and found to require higher reaction barriers, due to unfavorable dissociation of their stronger M-PPh3 bonds. These results highlight an advantage of the earth-abundant Co catalysts for the dissociative pathway(s). Overall, our study offers deeper mechanistic insights for the transition-metal-catalyzed amination and guides the design for efficient Co-based catalysts.

Regiodivergent Palladium-Catalyzed Alkene Difunctionalization Reactions for the Construction of Methylene Cyclobutanes and Methylene Cyclopentanes.

Regiodivergent palladium-catalyzed alkene difunctionalization reactions between diethyl malonate and 1,5-dienes bearing a triflate group at C2 are described. Use of tris(2,4-di-tert-butylphenyl)phosphite as a ligand leads to 4-exo-cyclization/functionalization to afford malonate-substituted methylene cyclobutanes. In contrast, the 1,2-bis(diphenylphosphino)benzene ligand provides methylene cyclopentanes via 5-endo-cyclization/functionalization. The five-membered ring-forming reactions occur via anti-carbopalladation of the enolate nucleophile, whereas four-membered ring-forming reactions proceed through syn-4-exo-migratory insertion of the tethered alkene, followed by C(sp3)-C(sp3) bond-forming reductive elimination from an (alkyl)Pd(II)(malonate) complex.

Modular Synthesis of Benzocyclobutenes via Pd(II)-Catalyzed Oxidative [2+2] Annulation of Arylboronic Acids with Alkenes.

Benzocyclobutenes (BCBs) are highly valuable compounds in organic synthesis, medicinal chemistry, and materials science. However, catalytic modular synthesis of functionalized BCBs from easily accessible starting materials remains limited. We report herein an efficient synthesis of diversely functionalized BCBs by a Pd(II)-catalyzed formal [2+2] annulation between arylboronic acids and alkenes in the presence of N-fluorobenzenesulfonimide (NFSI). An intermolecular carbopalladation followed by palladium oxidation, intramolecular C(sp2)-H activation by a transient C(sp3)-Pd(IV) species, and selective carbon-carbon (C-C) bond-forming reductive elimination from a high-valent five-membered palladacycle is proposed to account for the reaction outcome. Kinetically competent oxidation of alkylPd(II) to alkylPd(IV) species is important to avoid the formation of a Heck adduct. The reaction forges two C-C bonds of the cyclobutene core and is compatible with a wide range of functional groups. No chelating bidentate directing group in the alkene part is needed for this transformation.

Iridium-catalyzed hydroacylation reactions of C1-substituted oxabenzonorbornadienes with salicylaldehyde: an experimental and computational study.

An experimental and theoretical investigation on the iridium-catalyzed hydroacylation of C1-substituted oxabenzonorbornadienes with salicylaldehyde is reported. Utilizing commercially available [Ir(COD)Cl]2 in the presence of 5 M KOH in dioxane at 65 °C, provided a variety of hydroacylated bicyclic adducts in up to a 95% yield with complete stereo- and regioselectivity. The mechanism and origins of selectivity in the iridium-catalyzed hydroacylation reaction has been examined at the M06/Def2TZVP level of theory. The catalytic cycle consists of three key steps including oxidative addition into the aldehyde C–H bond, insertion of the olefin into the iridium hydride, and C–C bond-forming reductive elimination. Computational results indicate the origin of regioselectivity is involved in the reductive elimination step.

Medium and Large N-Heterocycle Formation via Allene Hydroamination with a Bimetallic Rh(II) Catalyst.

We report the synthesis of a 2-phosphinoimidazole-derived bimetallic Rh(II) complex that enables intramolecular allene hydroamination to form 7- to 10-member rings in high yield. Monometallic Rh complexes, in contrast, fail to achieve any product formation. We demonstrate a broad substrate scope for formation of various N-heterocycles. Macrocyclizations that form 11- to 15-member N-heterocycles are also demonstrated. Mechanistic studies suggest that the reaction proceeds via reversible allene insertion with a Rh-hydride followed by C-N bond-forming reductive elimination. We hypothesize that the reactivity observed with our catalyst vs monometallic Rh complexes is derived from the bimetallic nature of our complex.

C(sp2)-CF3 Reductive Elimination from Well-Defined Argentate(III) Complexes [nBu4N][Ag(Ar)(CF3)3

The preparation of a series of well-defined, shelf-stable square planar aryl(tris(trifluoromethyl))argentate(III) complexes [nBu4N]+[Ag(Ar)(CF3)3]− and their C(sp2)-CF3 bond-forming reductive elimination are described. Mechanistic studies of the C(sp2)-CF3 reductive elimination from these complexes, including kinetic studies, effect of temperature and solvent, and DFT calculations, indicate that the C(sp2)-CF3 bond-forming process occurred via a concerted reductive elimination pathway.

Well-defined organometallic Copper(III) complexes: Preparation, characterization and reactivity

• Organocopper(III) are key intermediates in a variety of copper-catalyzed cross-coupling reactions. • Four types of well-defined organocopper(III) complexes were summarized. • Development of organocopper(III) complexes will boost the new reaction discovery. Organocopper(III) species were generally considered as the key intermediates in a variety of copper-catalyzed cross-coupling reactions, aerobic oxidations, as well as enzyme-catalyzed oxidation reactions. The preparation and characterization of thermal stable organocopper(III) complexes, as well as investigation of their elementary bond-forming reductive elimination is missing in the chemistry map for a longtime, and is urgently needed, since these studies would deepen our understanding about the fundamentals of the copper catalysis and boost the new reaction discovery. In this review, the preparation and characterization of four types of well-defined copper(III) complexes including copper(III) complexes without copper-carbon bond, organocopper(III) complexes with rigid macrocyclic ligands, organocopper(III) complexes with fluoroalkylated ligands and other organocopper(III) complexes were summarized. In addition, the reactivities as well as bond-forming reductive elimination elementary reactions of a few organocopper(III) complexes were also discussed.

Light-promoted C-Cl bond-forming reductive elimination of a metal-metal bonded PdIII-PdIII complex.

The excited-state reductive elimination (RE) activities of a metal-metal bonded PdIII2 complex, [(2-phenylpyridyl)Pd(μ-acetate)Cl]2, are described. The C-Cl bond-forming RE reaction is accelerated by up to five orders of magnitude upon visible photoexcitation, which induces the Pd-Pd bond dissociation. This ligand field variation reduces the energy cost for intramolecular charge transfer (ICT) from coupling substrate to the metal center involved in the RE reaction. The correlation found between the ligand field and the RE activity indicates the ICT energy as a fundamental descriptor for RE reactions.

Merging Two Functions in a Single Rh Catalyst System: Bimodular Conjugate for Light-Induced Oxidative Coupling.

A single molecular rhodium catalyst system (PC2-Cp#RhIII) bearing two functional domains for both photosensitization and C-H carbometalation was designed to enable an intramolecular redox process. The hypothesized charge-transfer species (PC2•--Cp#RhIV) was characterized by spectroscopic and electrochemical analyses. This photoinduced internal oxidation allows a facile access to the triplet state of the key post-transmetalation intermediate that readily undergoes C-C bond-forming reductive elimination with a lower activation barrier than in its singlet state, thus enabling catalytic C-H arylation and methylation processes.

Nickel-Catalyzed trans-Carboamination across Internal Alkynes to Access Multifunctionalized Indoles.

A Ni-catalyzed reaction was developed for the synthesis of multifunctionalized indoles. The reaction proceeded through oxidative cyclization of the Ni(0)/P^N complex with an enyne system, 2-alkynyl anilinoacrylate, to provide a nickelacycle intermediate. The trans-carboamination around the internal alkyne was achieved by syn/anti-rotation of the Ni-carbenoid intermediate formed by C-N bond cleavage of the nickelacycle, and 3-alkenylated indoles were formed by C-N bond-forming reductive elimination. Notably, the synthesized indoles could be successfully transformed to functionalized carbazoles.