Blood Collection Tubes Research Articles

Case-Based Training on Best Practices in Effective Test Utilization for Clinical Laboratories: A Comparison of Two Educational Formats

Abstract Introduction/Objective While a survey of ASCP membership showed improvements being made in effective test utilization (ETU), there is an ongoing need for formal education on best practices. Case-based education drawn from real-world scenarios provides an opportunity to address this need, aimed at increasing the understanding of evidence- based guidelines to inform clinical test ordering and reduce overconsumption of supplies without compromising patient care. The poster presents two examples of case-based education presented in an innovative microlearning format and an eLearning format designed for clinical laboratory professionals. Methods/Case Report The activities presented 9 - 10 practical, real-world scenarios as educational cases along with assessment questions addressing a range of topics that included ETU for pancreatitis and cardiac injury, blood collection tube consumption and conservation, strategies for reducing repeat daily lab test ordering, and others. Each case was designed for learners to be able to review the content and answer the assessment questions in 5 minutes. In the microlearning activity, learners received the cases and questions via email on a scheduled frequency and completed them via mobile device. The questions were repeated up to 2 times to reinforce learning. Participants in the eLearning activity accessed the same cases and assessment questions via a different learning platform (with no staggered delivery). Results (if a Case Study enter NA) More than 2,500 learners have participated in one or both ETU activities, and feedback has been highly positive. The assessment results show proficiency gains for a range of laboratory personnel, including laboratory managers/supervisors, histotechnologists, medical laboratory scientists, laboratory technicians, pathologists, and other laboratory roles. Conclusion The results also show how case-based scenarios can help promote best practices in ETU, which may be particularly beneficial for laboratory decision-makers. In addition to showing increased understanding of ETU strategies, the results also pose lessons learned for designing similar types of case-based education.

Hierarchical Classification of Factors Associated With Noninvasive Prenatal Testing Failures and Its Impact on Pregnancy Outcomes

Abstract Objective To conduct a hierarchical classification analysis of the nonreportable results of noninvasive prenatal testing in an attempt to reduce failure rates and provide pregnant women with accurate information to alleviate their anxiety. Methods In this study, 30,039 singleton pregnancies who underwent noninvasive prenatal testing in a single center from May 2019 to April 2022 were collected, and 811 samples with initial noninvasive prenatal testing failure were retrospectively analyzed. Grouping was based on the reasons for initial test failure; tracking the noninvasive prenatal testing results and prenatal diagnosis results (if any) of the “z-scores in the gray area” group and analyzing the possible influencing factors of the “low fetal fraction” group in the pre-experimental and experimental period by using one-way analysis of variance, Mann-Whitney U test, and χ2 test; and tracking the pregnancy outcomes of the test failures samples to analyze the risk of perinatal complications and adverse pregnancy outcomes of the different types of test failures. Results None of the samples' initial nonresults because of z-scores in the gray area were ultimately found to have chromosomal aneuploidy. However, pregnancy complications (P = 0.018) and a high likelihood of adverse pregnancy outcomes (P = 0.048) may still occur. Maternal gestational age (P < 0.001), body mass index (P < 0.001), library concentration (P < 0.001), and fetal gender (P < 0.001) were considered to be the associated factors for the initial low fetal fraction results. This may be associated with pregnancy complications (P < 0.001) and a high likelihood of adverse pregnancy outcomes (P = 0.034). The body mass index (P = 0.015) and time between draws (P = 0.001) were associated with the second test’s success. The incidence of low fetal fraction samples was more frequent with blood collection tubes of the G type than with the K type (P < 0.001). Conclusion Initial nonresults because of z-scores in the gray area did not imply an increased risk of aneuploidy, but vigilance is needed for an increased risk of pregnancy complications and adverse pregnancy outcomes. Because of the low fetal fraction, the initial absence of results may be related to the assay method, as well as the effect of blood collection tubes and the need to be alert to the risk of pregnancy complications and adverse pregnancy outcomes.

A-070 Evaluation of Plain and Serum-Separator Blood Collection Tubes for the Measurement of Steroid Hormones by Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS)

Abstract Background Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) is the preferred method for quantifying steroids. Commonly measured steroids 11-deoxycortisol, androstenedione, testosterone, 17-hydroxyprogesterone and dehydroepiandrosterone (DHEA). Although serum separator blood collection tubes may not be recommended but their frequent use is attributed to the ease of serum separation. Moreover, the serum separator tube may be the only available option for analysis, without the need for additional sample collection. Under such conditions, from certain serum separator tubes, we observed occasional interference in LC-MS/MS steroid method. We pursued to evaluate the performance of blood collection tubes without and those with serum separators, for the quantification of specified steroids by LC-MS/MS. Methods Blood samples were collected from 10 volunteers using both plain and serum separator blood collection tubes procured from two major suppliers (Greiner and BD). The specified steroids were measured by LC-MS/MS method. The procedure involved addition of labeled internal standards to the samples and extraction of steroids in methyl tert-butyl ether. Subsequently, the extract dried under a stream of nitrogen, and the residue was reconstituted in the mobile phase. LC-MS/MS analysis involved multiple reaction monitoring (MRM) for the specified steroids and their internal standards. Results The figure shows a sample chromatogram from a subject with blood samples collected in a plain (A) and serum separator tubes from Greiner (B) and BD (C1 and C2, a zoomed of C1). In this sample, from the plain tube, the concentrations of 11-deoxycortisol, androstenedione, testosterone, 17-hydroxyprogesterone and DHEA were 27, 55, 690, 99 and 283 ng/mL respectively. No significant interference was observed in Greiner serum separator tube. Whereas BD serum separator tube exhibited several erroneous peaks making the quantitation of several steroids challenging or inaccurate. Conclusions In the described LC-MS/MS method, BD serum-separator tubes exhibited erroneous peaks. These peaks were not seen in Greiner serum-separator tubes.

B-013 Improving the Workflow of Blood and Coagulation Tests in clinical laboratory through the Utilization of Laboratory Automation Track Systems

Abstract Background The Laboratory Automation Track System (TLA) is an automated system designed for executing highly repetitive tasks within a laboratory, commonly applied in biochemical and immunological testing systems. It aims to reduce human errors in specimen handling, enhance the overall process quality, and provide better Turnaround Time (TAT) from specimen collection to result reporting. For the first time in our laboratory, we have integrated the blood and coagulation systems with TLA. Consequently, we seek to evaluate the differences in the testing workflow and reporting efficiency of the blood and coagulation systems after being connected to TLA. Methods Abbott GLP systems Track was the TLA system for connecting with blood and coagulation systems. Two Sysmex XN-9100 fully automatic hematology systems and two Sysmex CS-5100 fully automatic coagulation analyzers were developed for blood and coagulation system, respectively. TUNYEN Laboratory Information System was established for Laboratory information system (LIS). Results Through the analysis of quality indicators and integration with intelligent information systems, improvements have been made, including the reduction of blood collection tube usage, efficient manpower utilization management, tracking of specimen progress and achievement of timely reporting rates.(1)Approximately 2,915 blood collection test tubes are saved every month, with a converted cost of 0.15 USD per tube, and a total saving of 437 USD. And reduce the carbon emissions of 32 kgCO2e, comply with the spirit of ESG sustainable development.(2)The TLA no longer requires staff to collect and deliver specimens as in the past,reducing staff and enhancing work efficiency.One of manpower was saved and new inspection items were developed.(3)Tracking of specimen progress:The laboratory has set up a specimen tracking system to monitor the specimen delivery location and provide timely response to the clinical status.The one-hour TAT for blood and coagulation increased from 82.0% and 76.9% before improvement to 91.8% and 93.3% after improvement respectively. Conclusions The implementation of Laboratory Automation Track Systems (TLA) leads to a reduction in medical errors and specimen sample volume, while also enhancing accuracy and precision, thereby improving the safety of laboratory staff. Although the introduction of TLA may require an initial investment, it brings the benefits of automation, offering ease and efficiency to laboratory processes.

A-122 Evaluation of the Performance of the BD MiniDraw™ Capillary Blood Collection System Under Various Transport Conditions

Abstract Background Specimen transport is a vital component of the preanalytical phase. External factors such as temperature fluctuations, vibrations, shock, and prolonged transport times may negatively impact specimen integrity and compromise test results. A study was performed to evaluate the effects of temperature extremes and simulated transportation on specimen quality in the BD MiniDraw™ Capillary Blood Collection System with BD MiniDraw™ H&H and SST™ Capillary Blood Collection Tubes (BD MiniDraw™ H&H, BD MiniDraw™ SST™). The BD MiniDraw™ Capillary Blood Collection System enables capillary blood collection by trained healthcare workers in non-traditional settings (i.e., retail pharmacies and clinics). Methods Sixteen adult participants were enrolled from the on-site Associate Sample Collection Program. Venous blood was collected via venipuncture into reference comparator and no-additive tubes. Venous blood from no-additive tubes was then pooled into a secondary container for aliquoting into BD MiniDraw™ SST™ and MiniDraw™ H&H tubes. Thirty tubes per tube type were separated into 6 groups with storage and simulated transport conditions conducted in accordance with ASTM D7386-16 and ASTM D4169-22, as applicable: Group 1a: No transport, 2-8°C storage uncontrolled humidity, 49-52-hour storage; Group 1b: Air/road transport, 2-8°C storage uncontrolled humidity, 49-52-hour storage; Group 2a: No transport, 20-24°C storage, uncontrolled humidity, 5-7-hour storage; Group 2b: Road transport, 20-24°C storage, uncontrolled humidity, 5-7-hour storage; Group 3a: Road transport, 38-40°C storage, 90% relative humidity, 5-7-hour storage; Group 3b: Air/road transport, 38-40°C storage, 90% relative humidity, 49-52-hour storage Following clotting, centrifugation, and storage for the BD MiniDraw™ SST™ tubes, testing was performed for selected chemistry analytes (Albumin, Alanine Aminotransferase (ALT), Alkaline Phosphatase (ALKP), Blood Urea Nitrogen, Chloride, Calcium, Cholesterol, Creatinine, High Density Lipoprotein (HDL), Low Density Lipoprotein (LDL), Sodium, Total Bilirubin (TBIL), Total Protein, Triglycerides) on the Siemens Atellica® Solution. Testing was performed for hemoglobin/hematocrit on the Sysmex XN-1000 in the BD MiniDraw™ H&H Tubes. Visual quality (barrier formation, hemolysis) and tube integrity (physical damage, blood leakage, cap removal, tube fit into adaptor) were also evaluated. Mean biases and confidence intervals within the specific analyte clinical acceptance limit for each group comparison was considered clinically equivalent. Results Clinical equivalence was demonstrated for all analytes for each group comparison except ALKP, ALT, HDL, LDL, TBIL and hematocrit for the extreme transport/storage conditions for Group 3b versus Group 3a. Complete barrier formation with acceptable visual hemolysis was noted in all specimens post transport. Tube integrity was maintained post transport as well. Conclusions Analytes were not impacted across a wide range of temperature and transport conditions. However, exposing samples to extreme high temperature, high humidity conditions may affect analyte performance. This reiterates the importance of monitoring conditions to ensure accurate test results. No impact to visual observations of sample quality and tube physical integrity was noted at different storage and transportation extremes.

B-242 Improved Patient Satisfaction With Novel Capillary Blood Collection Devices as an Alternative to Venipuncture for Applications in Clinical Proteomic Assays

Abstract Background Two new clinical diagnostic tests are available that aid in the identification of lung nodules as likely malignant or likely benign. One test is an ELISA that measures the levels of seven autoantibodies to tumor-associated antigens that aids in the identification of patients with likely malignant lung nodules who may benefit from timely intervention. The other is an LC-MS/MS-based (MRM) test that measures the ratio of two proteins (LG3BP and C163A) combined with several clinical and radiological factors to aid in the identification of patients with likely benign lung nodules who may benefit from additional CT surveillance. Since commercialization, we have found that test access may be improved by providing alternatives to traditional venipuncture. Therefore, we conducted evaluation studies with two novel non-fingerstick capillary blood collection devices. These devices puncture the skin by utilizing either microneedles (Device A) or a lancet (Device B) for capillary blood collection. Methods Blood specimens were collected from consented donors using one of the two capillary blood collection devices and by venipuncture into K2EDTA blood collection tubes. Feedback was also solicited from the healthcare professionals and donors via a standard questionnaire. The whole blood specimens were shipped to the testing laboratory where the samples were processed according to the respective clinical assay workflows. Feasibility testing for the ELISA-based assay was conducted with both devices using normal healthy donor specimens (105 donors for Device A and 43 for Device B). Clinical evaluation was executed utilizing only Device B (77 donors with lung cancer and 13 with an indeterminate lung nodule). Feasibility testing for the LC-MS/MS-based assay was conducted with both devices using healthy donor specimens (103 donors for Device A and 41 for Device B), while clinical evaluation utilized only Device B (80 donors with lung cancer and 30 with an indeterminate lung nodule). Results Both capillary blood collection devices revealed good correlations to venous blood draws for the ELISA-based test during feasibility. The two devices also showed good correlations for the LC-MS/MS-based test, with the results from Device A requiring a correction factor. Due to technical and operational challenges throughout feasibility, Device B became the preferred device to be evaluated for the clinical study. Good correlations for both diagnostic tests were observed from the clinical study. During clinical evaluation, healthcare professionals and donors were asked to rate the ease-of-use, pain, and speed of collection when using Device B. Most healthcare professionals (108/126) rated the device as easy to use. Ninety-five percent of the donors reported minimal pain while the remainder reported moderate pain. Ninety-one percent of the donors felt that the time required to collect blood using Device B was acceptable. Sixty percent of the donors preferred the capillary collection device (Device B), 17% preferred venipuncture, while 23% reported no preference for blood collection. Conclusions The novel capillary blood collection devices demonstrated high correlations for two clinical diagnostic tests. Feedback collected from healthcare professionals and donors revealed that the majority preferred the capillary blood collection device as compared to traditional venipuncture for blood collection.

B-040 Direct Aspiration of Cryogenic Matrix Tubes on the Siemens Atellica System With Epic-Beaker Integration of External Barcode IDs for Analysis Small Volume Biobanked Specimens

Abstract Background Most core chemistry and immunochemistry clinical analyzers are designed for direct sampling of primary blood tubes with volumes ranging from 3.5-10 mL. This limits analysis of low volume pediatric specimens and biobanked aliquoted samples from clinical trials without manual technologist intervention. This work outlines a microsampling and data transmission scheme for analysis of 500 uL aliquots of biobanked serum collected for the Nutrition for Precision Health study powered by the NIH All of Us Research Program without relabeling secondary aliquot tubes after receipt. Methods Commercial plastic clip bearings sourced from IGUS (LCM-08-02) were used to stabilize the matrix tube in a standard 5 mL Sarstedt aliquot tube. 96-well format Matrix Tubes (ThermoFisher 3719-11) with pre-printed 10-digit side barcodes were programmed in the Atellica software as a custom false bottom tube with specifications height 75 mm, diameter 12 mm, bottom offset 41 mm and were loaded using a dedicated false bottom tray. Manifest files (.csv) containing the sample ID, clinical trials participant ID, collection date/time, age and sex were ingested into Epic via an Incoming Orders HL7 interface. Non-human patient records were generated using the participant ID as an external patient ID and patient name and calculating the Date of Birth based on the age in years given in the manifest file. Test orders were created based on assigned testing for the sample ID in the manifest. The sample ID corresponding the preprinted Matrix Tube barcode ID was inserted into the Epic container identifier field. Results Test orders were automatically transmitted to the Atellica Data Manger (ADM) allowing specimens to be run on the Atellica System (CH and IM modules) and results transmitted to Epic utilizing the established Data Innovations (DI) interface and processes used for patient samples without the need for Epic generated labels. Successful scanning and recognition of Matrix Tube barcodes was 100%. Complete aspiration of a Comprehensive Metabolic Panel, Lipid Panel, Iron, TIBC, hsCRP, insulin, and H, I, L indices occurred for 50% of samples tested without intervention. Approximately 250 uL of the 500 uL aliquot remained after aspiration of all tests (247.7 uL total volume) from the Matrix Tube. No probe crashes were observed despite the narrower 8 mm diameter of the Matrix Tubes versus the standard 12- or 13-mm diameter of primary blood collection tubes. Conclusions This Epic-DI-ADM data workflow and microsampling adaptation for Matrix Tube aspiration allows greater container type flexibility for the receipt and analysis of external samples delivered in non-primary blood tubes for clinical laboratories. Future work involving adjustment of the false bottom tube offset depth may reduce unusable sample volume allowing for a higher percentage of complete aspiration without intervention. This work is significant because it suggests existing clinical analyzers are easily adaptable to microsampling smaller volume tubes without significant effort.

Choice of blood collection methods influences extracellular vesicles counts and miRNA profiling.

Circulating RNAs have been investigated systematically for over 20years, both as constituents of circulating extracellular vesicles (EVs) or, more recently, non-EV RNA carriers, such as exomeres and supermeres. The high level of variability and low reproducibility rate of EV/extracellular RNA (exRNA) results generated even on the same biofluids promoted several efforts to limit pre-analytical variability by standardizing sample collection and sample preparation, along with instrument validation, setup and calibration. Anticoagulants (ACs) are often chosen based on the initial goal of the study and not necessarily for the later EV and/or exRNA analyses. We show the effects of blood collection on EV size, abundance, and antigenic composition, as well on the miRNAs. Our focus of this work was on the effect of ACs on the number and antigenic composition of circulating EVs and on a set of circulating miRNA species, which were shown to be relevant as disease markers in several cancers and Alzheimer's disease. Results show that while the number of plasma EVs, their relative size, and post-fluorescence labeling profile varied with each AC, their overall antigenic composition, with few exceptions, did not change significantly. However, the number of EVs expressing platelet and platelet-activation markers increased in serum samples. For overall miRNA expression levels, EDTA was a better AC, although this may have been associated with stimulation of cells in the blood collection tube. Citrate and serum rendered better results for a set of miRNAs that were described as circulating markers for Alzheimer's disease, colon, and papillary thyroid cancers.

Effect of blood collection tube containing protease inhibitors on the pre-analytical stability of Alzheimer's disease plasma biomarkers.

The reliability of plasma biomarkers of Alzheimer's disease (AD) can be compromised by protease-induced degradation. This can limit the feasibility of conducting plasma biomarker studies in environments that lack the capacity for immediate processing and appropriate storage of blood samples. We hypothesized that blood collection tube supplementation with protease inhibitors can improve the stability of plasma biomarkers at room temperatures (RT). In this study, we conducted a comparative analysis of blood biomarker stability in traditional ethylenediaminetetraacetic acid (EDTA) tubes versus BD™ P100 collection tubes, the latter being coated with a protease inhibitor cocktail. The stability of six plasma AD biomarkers was evaluated over time under RT conditions. We evaluated three experimental approaches. In Approach 1, pooled plasma samples underwent storage at RT for up to 96 h. In Approach 2, plasma samples isolated upfront from whole blood collected into EDTA or P100 tubes were stored at RT for 0 h or 24 h before biomarker measurements. In Approach 3, whole blood samples were collected into paired EDTA and P100 tubes, followed by storage at RT for 0 h or 24 h before isolating the plasma for analyses. Biomarkers were measured with Single Molecule Array (Simoa) and immunoprecipitation-mass spectrometry (IP-MS) assays. Both the IP-MS and Simoa methods revealed that the use of P100 tubes significantly improves the stability of Aβ42 and Aβ40 across all approaches. However, the Aβ42/Aβ40 ratio levels were significantly stabilized only in the IP-MS assay in Approach 3. No significant differences were observed in the levels of plasma p-tau181, GFAP, and NfL for samples collected using either tube type in any of the approaches. Supplementation of blood collection tubes with protease inhibitors could reduce the protease-induced degradation of plasma Aβ42 and Aβ40, and the Aβ42/40 ratio for the IP-MS assay. These findings have crucial implications for preanalytical procedures, particularly in resource-limited settings.

Validation of low-volume blood collection tubes for routine hematologic testing

Validation of low-volume blood collection tubes for routine hematologic testing

Evaluating the Status of Hepatitis B Vaccination in Healthcare Workers at a Central Laboratory in a Tertiary Care Hospital and Research Centre.

Introduction Hepatitis B virusis a significant occupational hazard for healthcare workers worldwide. Long-term protection against hepatitis B infection is conferred by the vaccineand the protective immune response is indicated by anti-hepatitis B surface antigen (HBsAg) titre. It is crucial to monitor anti-HBsAg titres as their levels decrease over time. The study aims to evaluate thestatus of hepatitis B vaccination among personnel working in the Central Laboratory of Shri B.M. Patil Medical College Hospital and Research Centre. The focus is on understanding the immunization practices and protection levels against HBV within this high-risk group. Materials and methods A cross-sectional analysis was conducted, including collecting demographic data, determining HBsAgstatus, evaluating anti-HBsAg titre value, and getting vaccination details of the laboratory personnel. The study participants included doctors, lab technicians, and attendants who were assessed for both vaccination coverage and immunity levels. After obtaining their written consent, 4 ml of blood was collected in sterile blood collection tubes. All the samples were tested for HBsAg. The negative samples were tested for anti-hepatitis B surface antigen antibody (HBsAg-Ab (IgG)) titre. The enzyme-linked immunosorbent assay (ELISA) method was used to evaluate the obtained samples for HBsAg and anti-HBsAg titre. Results A total of 99 healthcare workerswere included in the study. Most of the laboratory healthcare workers were in the age range of 20-30 years.In 84.8% of the subjects, protective antibody levels (>10 IU/ml) were found. The highest protection was seen among doctors (94.5%), followed by lab technicians (82.9%) and attendants (66.6%). However, 15.2% exhibited inadequate immunity, predominantly among the attendants (33.3%). The highest vaccination coverage was among doctors (91.8%), followed by lab technicians (78.7%) and attendants (53.3%). Most doctors had completed the full vaccination schedule (70.2%) or received a booster dose (24.3%) compared to lab technicians (57.4%)and attendants (46.6%). Conclusion The study highlights effective preventive measures against HBV among laboratory healthcare workers, as indicated by the absence of active infections. But it also emphasizes the necessity of focused initiatives to raise vaccination rates, particularly among attendants, in order to guarantee complete protection against HBV for all levels of laboratory workers.

Simultaneous quantification of baloxavir marboxil and its active metabolite in human plasma using UHPLC-MS/MS: Application to a human pharmacokinetic study with different anticoagulants

Baloxavir marboxil (BXM) is a cap-dependent nucleic acid endonuclease inhibitor, which exerts its antiviral effects after being metabolized to its active form baloxavir acid (BXA). Ethylenediamine tetra-acetic acid (EDTA) and heparin are the two most used anticoagulants in clinical blood sample collection to estimate drug levels in plasma. However, compared to heparin plasma, there is a lack of clinical pharmacokinetic data of BXA using EDTA anticoagulant tubes for blood collection. In the present study, an efficient, rapid, and sensitive ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) method was developed and validated for simultaneous quantification of BXM and its active metabolite BXA in human plasma with its isotopic baloxavir-d5 (BXA-d5) as internal standard (IS). Plasma samples (50 μL) were undergone using acetonitrile containing 0.1 % formic acid a precipitant. Chromatographic separation was achieved by a Waters XBridge®C8 (2.1 mm × 50 mm, 2.5 µm) column. The gradient mobile phase was 0.1 % formic acid in water (A, pH 2.8) and 0.1 % formic acid in acetonitrile (B) and delivered at a flow rate of 0.6 mL/min for 4.5 min. BXM and BXA were monitored using a positive electrospray triple quadrupole mass spectrometer (TRIPLE QUAD™ 6500+) via multiple reaction monitoring mode. The mass-to-charge ratios (m/z) were 572.2→247.0, 484.2→247.0 and 489.2→252.0 for BXM, BXA, and BXA-d5 (IS). Calibration curves exhibited excellent linearity in the range of 0.1–10 ng/mL for BXM (r2 > 0.996), and 0.3–300 ng/mL for BXA (r2 > 0.998). Within-run and between-run precisions in coefficients of variations were less than 11.62 % for BXM and less than 7.47 % for BXA, and accuracies in relative error were determined to be within −7.78 % to 5.70 % for BXM and −6.67 % to 8.56 % for BXA. Extraction recovery efficiency was 92.76 % for BXM, 95.32 % for BXA, and 99.26 % for BXA-d5, respectively. The matrix effect of BXM and BXA was in line with the requirements, where the relative deviation of the accuracy was less than 6.67 % and the precision was less than 6.69 %. The validated efficient and simple UHPLC-MS/MS method was successfully used in the pharmacokinetic study of BXM and BXA in healthy human volunteers with K2EDTA and heparin tubes for blood collection. EDTA might compete with BXA for chelating metal ions and thereby decrease the plasma ratio in whole blood, leading to approximately 50 % lower measurement of pharmacokinetic parameters as compared with those obtained from heparin plasma anticoagulant tubes.

Small-volume blood sample collection tubes in adult intensive care units: A rapid practice guideline.

This Intensive Care Medicine Rapid Practice Guideline (ICM-RPG) provides an evidence-based recommendation to address the question: in adult patients in intensive care units (ICUs), should we use small-volume or conventional blood collection tubes? We included 23 panelists in 8 countries and assessed and managed financial and intellectual conflicts of interest. Methodological support was provided by the Guidelines in Intensive Care, Development, and Evaluation (GUIDE) group. We conducted a systematic review, including evidence from observational and randomized studies. Using the Grading of Recommendations, Assessment, Development, and Evaluation (GRADE) approach, we evaluated the certainty of evidence and developed recommendations using the Evidence-to-Decision framework. We identified 8 studies (1 cluster and 2 patient-level randomized trials; 5 observational studies) comparing small-volume to conventional tubes. We had high certainty evidence that small-volume tubes reduce daily and cumulative blood sampling volume; and moderate certainty evidence that they reduce the risk of transfusion and mean number of red blood cell units transfused, but these estimates were limited by imprecision. We had high certainty that small-volume tubes have a similar rate of specimens with insufficient quantity. The panel considered that the desirable effects of small-volume tubes outweigh the undesirable effects, are less wasteful of resources, and are feasible, as demonstrated by successful implementation across multiple countries, although there are upfront implementation costs to validate small-volume tubes on laboratory instrumentation. This ICM-RPG panel made a strong recommendation for the use of small-volume sample collection tubes in adult ICUs based on overall moderate certainty evidence.

Sample suitability and stability in different blood collection tubes for methanol, ethanol, isopropanol, acetone and glycols analysis

AimTo systematically examine the sample suitability and stability for volatile alcohols (methanol, ethanol and isopropanol with its metabolite acetone) and glycols (ethylene/propylene glycols, EG/PG) in different collection tubes.MethodTwo pools of...

Clinical Application of ISO and CEN/TS Standards for Liquid Biopsies-Information Everybody Wants but Nobody Wants to Pay For.

Liquid biopsies are emerging as valuable clinical biomarkers for cancer monitoring. Although International Organization for Standards (ISO) and Technical Specifications from the European Committee for Standardization (CEN/TS) standardized workflows exist, their implementation in clinical practice is underdeveloped. We aimed to assess the applicability of ISO and CEN/TS standards in a real-world clinical setting, with a particular focus on evaluating the impact of preanalytical parameters and hemolysis on liquid biopsy analysis. We evaluated 659 peripheral blood samples from advanced prostate cancer patients against ISO and CEN/TS standards and documented all essential criteria, including tube draw order, filling level, temperature, and time tracking from blood draw to storage. We assessed hemolysis and its effect on circulating tumor DNA (ctDNA) and circulating tumor cell (CTC) analysis. Our results demonstrated a high compliance rate, with 96.2% (634/659) of samples meeting essential ISO and CEN/TS criteria. We did not observe a significant impact on ctDNA or CTC detection rates between hemolytic and nonhemolytic samples. Hemolysis was identified in 12.9% (40/311) of plasma samples from our advanced prostate cancer cohort, and within the draw order of 5 blood collection tubes, hemolysis did not significantly increase from tube 1 to 5. In total, 83.8% (552/659) of blood collection tubes had high fill levels above 80% of nominal filling level. Our study demonstrates the feasibility and benefits of adhering to ISO and CEN/TS standards in a clinical liquid biopsy study. The standards revealed that hemolysis occurred frequently but did not impair downstream ctDNA and CTC analysis in our cohort of advanced prostate cancer patients.

Comparison of sample materials for S100b analysis

Head injury is a potentially lethal and frequently occurring condition in the emergency department (ED). Reliable and fast diagnosis is important both for patients and flow in the ED. Circulating S100B is used to rule out the need for head computer tomography in low-risk patients with mild head injury. The flow of these patients through the ED would benefit from shorter turn-around time. Standard serum clotting tubes require 30-60 min clotting time, followed by an analysis time of 45 min. Here, we evaluated the performance of two alternative blood collection tubes; a rapid serum tube (RST) with a recommend clotting time of 5 min and a hirudin tube (HIR) for instant anticoagulation. S100B measurement was performed on paired blood samples from 221 subjects using a Roche Cobas 602 analyser. The performances of the alternative tubes were evaluated by method comparison to the standard serum clotting tube, repeatability and agreement of results obtained from alternative tubes compared with the standard clotting tube. Both alternative tubes had a minor positive bias (RST = 0.011 µg/L, HIR = 0.008 µg/L). The repeatability was 2% for RST and 10% for HIR, while being 4% for the standard clotting tube. In the agreement analysis, the positive and negative predictive values for RST were 62% and 100% while being 73% and 99% for HIR respectively. Our study suggests that RST is a feasible alternative to reduce laboratory turn-around time in S100b analysis.

Blood collection tube and anticoagulant influence on SARS-CoV-2 antibody and avidity levels

SARS-CoV-2 serology plays a crucial role in assessing COVID-19 vaccine immunogenicity and antibody responses to SARS-CoV-2 infection. Tube type and anticoagulant may influence serology results. Thus, understanding the influence of these variables in test results is key.We evaluated the influence of serum collection tube type and anticoagulant on anti-SARS-CoV-2 spike antibody levels detected by enzyme-linked immunosorbent assays (ELISAs) and Luminex multiplex assays (11-plex) in serum and plasma samples. Anti-spike IgG avidity was also evaluated in both sample types.No significant differences were found between serology assay results using different blood (serum) collection tube types. However, significantly lower antibody concentrations (p < 0.05) were observed in tubes with the anticoagulants sodium citrate and acid citrate dextrose (ACD) in the ELISA and Multiplex assays (n = 29), compared to expected concentrations. These differences mostly disappeared after adjusting for the dilution factor caused by the anticoagulant volume, indicating that anticoagulant does not significantly impact the assay results, while anticoagulant volume does.There was a significant difference (p < 0.05) in IgG avidity (M) of plasma samples (p < 0.05) compared to serum, but anticoagulant type had no effect.Overall, these findings indicate that the choice of collection tube may introduce subtle variations in assay results if the volumes of anticoagulants are not taken into consideration. Additionally, differences between serum and anticoagulant-treated plasma matrices were observed in avidity ELISAs, indicating that these samples are not interchangeable for these assays; a finding that requires further investigation.

Consistency analysis of two fingertip capillary blood sampling methods for complete blood count

This study was performed to analyze fingertip capillary blood sampling in pediatric patients using microcapillary blood collection tubes and microhematocrit tubes and to compare the blood cell analysis results obtained via these two blood collection methods. Finger capillary blood was collected from 110 outpatients using microcapillary blood collection tubes and microhematocrit tubes and complete blood count analysis was performed with a Sysmex XS-900i hematology analyzer and manual microscopy for blood cell morphology. Paired data was evaluated for agreement and bias using the microhematocrit samples as the reference group and the samples from the microcapillary blood collection tubes as the observation group. The two blood collection methods demonstrated good agreement for measuring red blood cell (RBC) parameters (i.e., RBC, Hb, Hct, MCV, MCH and MCHC), wherein the relative bias was > allowable total error (TEa) in 0.91%, 1.82%, 11.82%, 1.82%, 0.91% and 8.18% of the parameter measures, respectively. According to industry requirements, the proportion of samples meeting the acceptable bias level should be > 80%. Additionally, the estimated biases at each medical decision level were within clinically acceptable levels for RBC, Hb, Hct, and MCV. However, the proportion of WBC and PLT counts with relative bias > TEa was 25.45% and 35.45%, respectively. Furthermore, the relative bias of the WBC count at the medical decision level of 0.5 × 109/L and that of the PLT counts at the medical decision levels of 10 × 109/L and 50 × 109/L were clinically significant. Bland–Altman analysis further showed a mean bias of 0.66 × 109/L (95% LoA, − 0.79 to 2.11) for the WBC count and 39 × 109/L (95% LoA, − 46 to 124) for the PLT count from the blood samples collected in the microcapillary blood collection tubes compared with the counts of those collected in the microhematocrit tubes. Neutrophil, monocyte, lymphocyte, eosinophil, and PLT counts increased significantly in the microcapillary blood collection tubes compared with those in the microhematocrit tubes, along with an elevated number of instrument false alarms (P < 0.05). The two capillary blood collection devices exhibit performance differences. Therefore, clinicians should pay attention to the variation in results caused by different blood collection methods.

Fast and efficient isolation of murine circulating tumor cells using screencell technology for pre-clinical analyzes

Circulating tumor cells (CTCs) represent a rare and heterogeneous population of cancer cells that are detached from the tumor site and entered blood or lymphatic circulation. Once disseminated in distant tissues, CTCs could remain dormant or create a tumor mass causing serious danger for patients. Many technologies exist to isolate CTCs from patients’ blood samples, mostly based on microfluidic systems or by sorting them according to their surface antigens, notably EpCAM, and/or cytokeratins for carcinoma. ScreenCell has developed an easy-to-use, antigen-independent, rapid, cost-effective, and efficient technology that isolates CTCs according to their bigger size compared to the blood cells. This study provides the technical information necessary to isolate and characterize CTCs from mouse blood. By using blood samples from transgenic mice with breast cancer or from WT mice in which we spiked cancer cells, we showed that ScreenCell technology is compatible with standard EDTA blood collection tubes. Furthermore, the ScreenCell Cyto kit could treat up to 500 µl and the ScreenCell MB kit up to 200 µl of mouse blood. As the ScreenCell MB kit captures unaltered live CTCs, we have shown that their DNA could be efficiently extracted, and the isolated cells could be grown in culture. In conclusion, ScreenCell provides a rapid, easy, antigen-independent, cost-effective, and efficient technology to isolate and characterize CTCs from the blood samples of cancer patients and murine models. Thanks to this technology CTCs could be captured fixed or alive. Murine cancer models are extensively used in pre-clinical studies. Therefore, this study demonstrates the crucial technical points necessary while manipulating mouse blood samples using ScreenCell technology.

Development of an immunoassay for quantification of soluble human CD40L (CD154) in plasma and serum samples

When the membrane protein CD40 ligand (CD40L) on activated T cells binds the receptor CD40 on B-cells, it provides a co-stimulatory signal for B cell activation. Dysregulation of the CD40L:CD40 axis is associated with inflammatory and autoimmune diseases. The presence of soluble CD40L (sCD40L) in plasma is implicated in several diseases, from cardiovascular and autoimmune diseases to different types of cancer, and sCD40L has been suggested as a valuable marker of disease. If sCD40L is to be used as a biomarker, being able to precisely measure and quantify the levels of sCD40L in human blood samples is of utmost importance. We demonstrate the development of a sandwich-type time-resolved immunofluorometric assay for quantification of sCD40L in plasma or serum samples. For this, we generate 29 monoclonal anti-CD40L antibodies, and from these, we select the optimal combination of capture antibody and detection antibody. A number of variables were tested: the influence of the type of sample (comparing 3 different blood collection tubes for serum sampling and 4 different types of tubes for plasma sampling), the influence of freeze-thaw cycles, the influence of sampling time during night and day, and the influence of centrifugation of the samples. We found a very similar level of sCD40L in paired EDTA plasma and serum samples. Out of 100 healthy blood donor samples 61 had a level of sCD40L below the detection level of the assay, whereas the remaining 39 samples had ranging levels of sCD40L from 1.14 to 33.14 ng/mL. In summary, we present a time-resolved immunofluorometric assay based on paired monoclonal antibodies, ensuring high specificity, sensitivity, and homogeneity. The Eu3+-based assay additionally provides consistent assay readouts due to the extended decay time not seen in standard enzyme-linked immunosorbent assays. The assay paves the way for specific and consistent quantification of sCD40L in human plasma and serum samples.