Bleached Area Research Articles

Standardization of in situ coral bleaching measurements highlights the variability in responses across genera, morphologies, and regions.

Marine heatwaves and regional coral bleaching events have become more frequent and severe across the world's oceans over the last several decades due to global climate change. Observational studies have documented spatiotemporal variation in the responses of reef-building corals to thermal stress within and among taxa across geographic scales. Although many tools exist for predicting, detecting, and quantifying coral bleaching, it remains difficult to compare bleaching severity (e.g., percent cover of bleached surface areas) among studies and across species or regions. For this review, we compiled over 2,100 in situ coral bleaching observations representing 87 reef-building coral genera and 250 species of common morphological groups from a total of 74 peer-reviewed scientific articles, encompassing three broad geographic regions (Atlantic, Indian, and Pacific Oceans). While bleaching severity was found to vary by region, genus, and morphology, we found that both genera and morphologies responded differently to thermal stress across regions. These patterns were complicated by (i) inconsistent methods and response metrics across studies; (ii) differing ecological scales of observations (i.e., individual colony-level vs. population or community-level); and (iii) temporal variability in surveys with respect to the onset of thermal stress and the chronology of bleaching episodes. To improve cross-study comparisons, we recommend that future surveys prioritize measuring bleaching in the same individual coral colonies over time and incorporate the severity and timing of warming into their analyses. By reevaluating and standardizing the ways in which coral bleaching is quantified, researchers will be able to track responses to marine heatwaves with increased rigor, precision, and accuracy.

Coral Reef Bleaching under Climate Change: Prediction Modeling and Machine Learning

The coral reefs are important ecosystems to protect underwater life and coastal areas. It is also a natural attraction that attracts many tourists to eco-tourism under the sea. However, the impact of climate change has led to coral reef bleaching and elevated mortality rates. Thus, this paper modeled and predicted coral reef bleaching under climate change by using machine learning techniques to provide the data to support coral reefs protection. Supervised machine learning was used to predict the level of coral damage based on previous information, while unsupervised machine learning was applied to model the coral reef bleaching area and discovery knowledge of the relationship among bleaching factors. In supervised machine learning, three widely used algorithms were included: Naïve Bayes, support vector machine (SVM), and decision tree. The accuracy of classifying coral reef bleaching under climate change was compared between these three models. Unsupervised machine learning based on a clustering technique was used to group similar characteristics of coral reef bleaching. Then, the correlation between bleaching conditions and characteristics was examined. We used a 5-year dataset obtained from the Department of Marine and Coastal Resources, Thailand, during 2013–2018. The results showed that SVM was the most effective classification model with 88.85% accuracy, followed by decision tree and Naïve Bayes that achieved 80.25% and 71.34% accuracy, respectively. In unsupervised machine learning, coral reef characteristics were clustered into six groups, and we found that seawater pH and sea surface temperature correlated with coral reef bleaching.

Sustainability & Comparative Impact Analysis of Coral Reef Bleaching in Indian Context

An estimated value of 500 million of the population are directly benefited through coral reefs related jobs, food and defence of coastal areas. Coral reefs help to reduce wave energy by 97%. They help to protect the coastal areas from storms, floods and wave energy by 97%. Natural disasters such as Tsunami and erosion of coastal areas are protected by reefs. In this process, they help to protect the lives of many staying in the coastal areas including animals, properties, and other natural resources. There are reasons for reef deterioration like change of climate, high pollution, destructive fishing, bleaching of coral reefs is a big concern now worldwide. Severe coral bleaching is also reported in India. A significant rise in the surface temperature of Sea has become a critical reason for coral bleaching. This work attempts to Study the link between sustainability , SDG goals of 2030 given by United Nations and coral bleaching. In this work study period is focused from 1985 to 2021 in the Indian coral reef bleaching areas.

Similarities and Differences Between Two Deadly Caribbean Coral Diseases: White Plague and Stony Coral Tissue Loss Disease

For several decades, white plagues (WPDs: WPD-I, II and III) and more recently, stony coral tissue loss disease (SCTLD) have significantly impacted Caribbean corals. These diseases are often difficult to separate in the field as they produce similar gross signs. Here we aimed to compare what we know about WPD and SCTLD in terms of: (1) pathology, (2) etiology, and (3) epizootiology. We reviewed over 114 peer-reviewed publications from 1973 to 2021. Overall, WPD and SCTLD resemble each other macroscopically, mainly due to the rapid tissue loss they produce in their hosts, however, SCTLD has a more concise case definition. Multiple-coalescent lesions are often observed in colonies with SCTLD and rarely in WPD. A unique diagnostic sign of SCTLD is the presence of bleached circular areas when SCTLD lesions are first appearing in the colony. The paucity of histopathologic archives for WPDs for multiple species across geographies makes it impossible to tell if WPD is the same as SCTLD. Both diseases alter the coral microbiome. WPD is controversially regarded as a bacterial infection and more recently a viral infection, whereas for SCTLD the etiology has not been identified, but the putative pathogen, likely to be a virus, has not been confirmed yet. Most striking differences between WPD and SCTLD have been related to duration and phases of epizootic events and mortality rates. While both diseases may become highly prevalent on reefs, SCTLD seems to be more persistent even throughout years. Both transmit directly (contact) and horizontally (waterborne), but organism-mediated transmission is only proven for WPD-II. Given the differences and similarities between these diseases, more detailed information is needed for a better comparison. Specifically, it is important to focus on: (1) tagging colonies to look at disease progression and tissue mortality rates, (2) tracking the fate of the epizootic event by looking at initial coral species affected, the features of lesions and how they spread over colonies and to a wider range of hosts, (3) persistence across years, and (4) repetitive sampling to look at changes in the microbiome as the disease progresses. Our review shows that WPDs and SCTLD are the major causes of coral tissue loss recorded in the Caribbean.

Variability of decomposing ability among fungi associated with the bleaching of subtropical leaf litter

ABSTRACT A diverse array of fungi take part in decomposition, but the variability of their decomposing ability is not fully understood. A total of 49 isolates of Ascomycota and Basidiomycota were obtained from bleached areas of leaf litter in a subtropical forest in southern Japan, and their ability to decompose leaves and recalcitrant compounds was quantified in pure culture. Mass loss of leaves of Castanopsis sieboldii (Fagaceae) and Schima wallichii (Theaceae) was evaluated at 20 C for 12 wk in vitro. Fungi caused a loss of −0.4% to 34.3% of the original leaf mass. The greatest mass loss was caused by four isolates of Mycena (Tricholomataceae). Isolates of Lachnocladiaceae caused greater mass loss of recalcitrant compounds, registered as acid-unhydrolyzable residue (AUR), which includes lignin, relative to Xylariaceae. Isolates of Rhytismataceae, Lachnocladiaceae, Marasmiaceae, and Omphalotaceae exhibited selective decomposition of AUR, Mycena exhibited simultaneous decomposition of AUR and components other than AUR, and Xylariaceae exhibited selective decomposition of components other than AUR. Mass losses of leaves and AUR caused by each fungal isolate were similar for C. sieboldii and S. wallichii. The Mycena isolates obtained from C. sieboldii caused greater mass losses of leaves and AUR than those obtained from the other tree species, suggesting a “home-field advantage” of decomposing potentialities, with implications for natural interactions beyond the in vitro system evaluated here.

Symbiodiniaceae conduct under natural bleaching stress during advanced gametogenesis stages of a mesophotic coral

The mesophotic coral Alveopora allingi from the northern Gulf of Eilat/Aqaba, Red Sea, is affected by year-round partial coral-bleaching events. During these events, the migration of Symbiodiniaceae takes place from the coral-host mesoglea to the developed oocytes in bleached parts of colonies of A. allingi but not in the non-bleached parts. Additionally, these oocytes are abnormal, missing part of the structural material of the peripheral areas, and are also significantly larger in the bleached areas of the colonies. Hence, we suggest a parasitic behavior of the symbionts or a commensalism relationship which enhance symbionts' needs during bleaching periods and may boost the gametogenesis development in these corals. We propose that evolutionarily, this behavior may greatly contribute to the symbiont community survival throughout the bleaching period, and it can also be beneficial for the host's persistence and adaptation to bleaching through the acquisition of a specific symbiont community following the bleaching event.

Bleaching of leaf litter accelerates the decomposition of recalcitrant components and mobilization of nitrogen in a subtropical forest

Selective removal of lignin and other recalcitrant compounds, collectively registered as acid-unhyrolyzable residue (AUR), results in bleaching of leaf litter, but the importance of bleaching in decomposition processes on forest soil has not been fully evaluated. The aims of this study were to elucidate the occurrence of bleached area in decomposing leaf litter and to compare chemical composition between bleached and nonbleached portions in a subtropical forest in Japan. Field incubation of leaf litter was performed over an 18-month period with the litterbag method. The decomposition processes during the first 9 month were characterized by the relatively rapid mass loss and increase of bleached area, whereas the mass loss was slowed down and the bleached area decreased thereafter. Mass loss of leaf tissues was faster and AUR content was lower in bleached than in nonbleached portions, indicating the acceleration of mass loss in bleached leaf tissues by the selective decomposition of recalcitrant compounds. The decrease in carbonyl-C in the bleached portions was associated with the increase of extractable nitrogen. The results suggest that the bleaching plays a dominant role in the transformation and turnover of organic compounds and nitrogen in decomposing leaf litter.

Diversity and Geographic Distribution of Ligninolytic Fungi Associated With Castanopsis sieboldii Leaf Litter in Japan.

The diversity and geographic pattern of ligninolytic fungi were investigated within the distribution range of an evergreen tree, Castanopsis sieboldii (Fagaceae), in Japan. Fungal isolates obtained from 18 sites in subtropical and temperate regions in Japan were classified into 50 operational taxonomic units in Ascomycota and Basidiomycota according to the base sequence of the rDNA internal transcribed spacer region. Ordination by nonmetric multidimensional scaling showed the separation of fungal compositions between the study sites which was significantly related to the latitude, longitude, and mean annual temperature (MAT) of the study sites. We applied variation partitioning to separate the magnitude of the climatic, spatial, and leaf property factors and found the roles of MAT and spatial factors in structuring fungal assemblages, suggesting the importance of both niche processes and such non-niche processes as priority effect and dispersal limitation. The bleached area on leaf litter was greater at sites with higher MAT and precipitation located at lower latitudes and at sites where some major ligninolytic fungi occurred at greater relative frequencies, indicating that not only the climatic conditions but also the biogeographic patterns of distribution of ligninolytic fungi influence the decomposition of lignin in leaf litter.

On the Velocity Profile of Couette Flow of Lubricant Within a Micro/Submicro Gap

The hydrodynamic lubrication properties of sliding bearings are influenced by the velocity profile under shear. However, at present, there are very few reports on the velocity profile distribution of the fluid film lubrication in conformal contacts. In this article, an apparatus was built for in situ measurement of the velocity profile of thin oil film under a micro/submicro gap at ambient pressure using a photobleached imaging technique and imaging the shape evolution of the bleached area under shear. The film thickness is calibrated by interferometry. The results show that the velocity profile of oligomer PB450 doped with a fluorescent agent is a typical linear distribution under higher film thickness, which is in accordance with the classical lubrication theory. When the gap of the disk and slider is less than 2 μm, there are obvious partial inhomogeneous shear flows at ambient pressure, and the slip length increases with the decreasing film thickness. Lubricants of different viscosities and molecular structures show an inhomogeneous flow transition at different confinements. Correspondingly, abnormal velocity profile results combined with generalized Reynolds equation could explain the phenomenon that the convergence ratio of the maximum load-carrying capacity is larger than 1.2 experiencing hydrodynamic lubrication. Hence, this work contributes to an improved understanding of rheology as well as more accurate predictions of tribological properties.

Sediment deposition and coral smothering.

Dredging in the marine environment to create and maintain safe, navigable shipping channels, and subsequent disposal of the material at sea in dredge material placement sites (spoil grounds) can generate large quantities of suspended sediment that can impact upon epibenthic marine communities. For sensitive taxa such as hard corals, understanding the mechanisms of mortality and the spatial scale over which these occur is critically important for impact prediction purposes, management of dredging using zonation schemes, and also public perception. We describe the sediment deposition field from suspended sediment falling back out of suspension created around a large (7.6 Mm3) 1.5-year capital dredging project on a reef, using data from 2 weekly repeat observations of >500 individually tagged corals at multiple locations from 0.2–25 km from the dredging. The observations were supported by concurrent in situ measurements of proxy suspended sediment concentrations, underwater light, and sediment deposition (using optical backscatter sensors), and before and after surveys of seabed particle size distributions (PSDs). The distance at which 90% of the effect (from maximum to minimum) had dissipated (ED10) was 20 km away from the dredging for suspended sediment concentrations (estimated via nephelometry), and underwater light (measured using PAR sensors) associated with turbid plumes, 14 km for sediment deposition (measured using optical backscatter sensors) and 4.6 km for changes seabed clay and silt content (PSD analysis). The ED10 for smothering of corals (the build-up of pools of loose sediment on the surface that could not be removed by self-cleaning) occurred much closer still at 3–3.3 km or (0.5–0.6 km for an ED50). Smothering was common on encrusting and foliose forms where sediments accumulated in hollows and massive hemispherical forms where surface undulations (bumps) allowed sediments to pool. Smothering was never observed on branching species, even under extreme levels of sedimentation. Sediment smothering resulted in tissue bleaching and partial mortality (lesion formation), but if sediments were removed (by currents) bleached areas regained pigmentation over weeks and there was regrowth/reparation of lesions over weeks and months even before the dredging was completed. Overall sedimentation tolerance was highly related to coral morphology and surface inclination and the ability to avoid smothering by having uninterrupted downhill pathways for sediment transport across the colony.

The preparation of supported lipid bilayers and its functional study

Supported lipid bilayers (SLBs) have been widely used in biomedical and bioengineering research in vitrobecause its structure and function are similar to natural cell membrane. A fluorescence recovery after photobleaching (FRAP) technique was used to measure the lateral diffusion of the SLBs composed of 1, 2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1, 2-dioleoyl-sn-glycero-3-［(N-(5-amino-1-carboxyp-entyl) iminodiacetic acid)］ (DGS-NTA) on the glass slide, and the effects of the DOPC-to-DGS-NTA ratio, small unilamellar vesicles (SUV) producing method, sizes of bleaching areas and concentrations of loading proteins on the SLBs fluidity and diffusion coefficient were studied systematically in this paper. The results demonstrated that: (1) SUV made by probe sonication exhibited more uniform and smaller size compared with that made by film extrusion, but the whole process of SLBs formation must not be exposed to air. (2) The fluorescence recovery rate and diffusion coefficient of the SLBs decreased with the increasing bleaching area size. With the mole ratio of DOPC to DGS-NTA decreasing from 98∶2 to 84∶16, the fluidity and fluorescence recovery degree decreased gradually, and the SLBs would lose its fluidity if the ratio reached to 82∶18. (3) The average fluorescence intensity of SLBs increased linearly with the loading protein concentration (10-40 nmol·L -1), and the protein showed good mobility on the SLBs. The study would provide a good platform of bio-membrane for further research on interactions among cell membrane molecules and subsequent signals response.

The Effect of Different Bleaching Treatments and Thermal-Mechanical Cycling on the Shear Bond Strength of Orthodontic Brackets.

The aim of the present study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to the enamel after at-home and in-office bleaching treatments. Sixty bovine incisors were subjected to initial color readings and then classified into three groups: CP (16% carbamide peroxide), HP (35% hydrogen peroxide), and C (control). After treatments, new color readout was obtained, and orthodontic brackets were bonded to the bleached area. Half of the samples of each group (n=10) were subjected to thermal-mechanical cycling (TMC) testing (1,200,000 cycles; 44.2 N; 2 Hz/s), whereas the other half were stored in distilled water at 37 °C for 24 h. Samples were subjected to the SBS test at a speed of 0.5 mm/min. The mean SBS was analyzed (two-way ANOVA, Bonferroni test, p<0.05), and the fracture patterns were classified as adhesive, cohesive, and mixed types. There was no difference (p>0.05) in SBS values between the samples subjected to TMC and the cycled samples in any group. Samples subjected to carbamide peroxide presented lower SBS (p<0.05) than the non-cycled ones. Enamel adhesive fractures were higher in the bleached groups than in the control group, which presented mixed fractures prevalence, regardless of whether it was subjected to TMC or not. Thermal-mechanical cycling was not significant for SBS of orthodontic brackets, but tooth bleaching was a factor.

PEMETAAN DAN PENGARUH KEBISINGAN TERHADAP KELELAHAN KERJA KARYAWAN PADA BAGIAN FIBERLINE DI INDUSTRI PEMBUATAN BUBUR KERTAS

Manpower is an element that is dealing directly with the various consequences of industrial activities undertaken. Unqualified physical work environment such as noise that has exceeded the NAV is one of the examples faced by the workforce in the workplace. One of the activities that produce noise is the activity in the fiberline department in the pulp making industry which is the pulp making area. This study aims to map the noise and its effect on employee fatigue in the pulp making industry in the fiberline department. Research stages include noise measurement, noise mapping, filling out questionnaires by employees about work fatigue, calculation of questionnaire results, determining the effect of noise and work fatigue with regression analysis, and correlation determination. The noise mapping results at 30 point measurements indicate that the bleaching and pulp engine border areas exceed the safe threshold noise. Regression analysis results show the higher the noise level, the higher the level of work fatigue in employees. The result of correlation analysis is known that the correlation is positive or strongly correlated which shows that the effect of noise on fatigue is very strong. The noise mapping results can be known which area exceeds the noise threshold, so the company can anticipate the negative impact, as well as the strong relationship between noise and work fatigue.

Sodium hypochlorite penetration into dentinal tubules after manual dynamic agitation and ultrasonic activation: a histochemical evaluation.

The aim of this study was to compare the effects of Manual Dynamic Agitation and Passive Ultrasonic Irrigation on sodium hypochlorite (NaOCl) penetration into dentinal tubules using its bleaching ability. Thirty-four single-rooted teeth with round-shaped root canals were distributed in two homogeneous groups and one control group, characterized by different NaOCl activation systems: Manual Dynamic Agitation and Passive Ultrasonic Irrigation. After instrumentation, all root canals were stained with 10% copper sulphate solution followed by 1% rubeanic acid alcohol solution under vacuum. Final irrigation was performed with 5mL of 5.25% NaOCl solution for 1min and activated with Manual Dynamic Agitation or Passive Ultrasonic Irrigation for another 1min depending on the treatment group. The teeth were transversely sectioned at the middle portion of the apical, middle, and coronal thirds and observed under light microscope. NaOCl solution penetration was evaluated by measuring the percentage of bleached circumference of the root canal relative to the stained circumference, bleached areas, mean, and maximum penetration depth. No differences in the evaluated parameters were observed between groups (p > 0.05). Within groups, an increase of values was recorded from apical to coronal direction as for percentage of staining, percentage of bleaching and bleached area. NaOCl penetration into dentinal tubules did not significantly vary among the three levels. No significant differences in penetration of sodium hypochlorite into dentinal tubules when activated by means of Manual Dynamic Agitation or Passive Ultrasonic Irrigation were observed in the apical, middle, and coronal thirds of teeth with single straight round root canals.

Callyspongia samarensis (Porifera) extracts exhibit anticancer activity and induce bleaching in Porites cylindrica (Scleractinia)

ABSTRACTMarine sponges can produce allelopathic compounds with specific roles in the competition for benthic space. Here we demonstrate that extracts from Callyspongia samarensis (Phylum Porifera) accelerate bleaching in Porites cylindrica (Phylum Cnidaria, Order Scleractinia) and exhibit in vitro anticancer activity. A column chromatography fraction and HPLC fraction, purified from the crude methanol extract of C. samarensis, were incorporated into agar gel cubes at natural concentrations and tested on P. cylindrica corals in a laboratory assay. Statistical analysis of percent bleached area and maximum quantum yield showed that a significant difference existed between P. cylindrica nubbins that were exposed to C. samarensis extracts versus the control group. This suggests that C. samarensis contains allelopathic compounds that can cause bleaching in P. cylindrica, possibly leading to tissue necrosis and death. Furthermore, the aforementioned HPLC fraction exhibited significant growth inhibition of the HCT-116 (human colon cancer) cell line. Understanding the strategies by which sponges exert dominance over other organisms is important because it provides information about the ecological roles of sponge allelopathy and can result in the discovery of compounds with biomedical potential.

Do nymphs and adults of three Neotropical zoophytophagous mirids damage leaves and fruits of tomato?

The predators Macrolophus basicornis (Stal), Engytatus varians (Distant) and Campyloneuropsis infumatus (Carvalho) consume large numbers of tomato pests such as Bemisia tabaci (Gennadius) and Tuta absoluta (Meyrick). However, they are zoophytophagous and feed on plant parts as well. We evaluated the type and effect of injury caused by nymphs and adults of these mirids on tomato seedlings and fruit in the absence of prey. For each mirid species, seedlings were exposed to groups of 20 nymphs or adults for 72 h, and fruits were exposed for 48 h to groups of four nymphs or adults. Type and the number of injury on stems, petioles and leaflets of tomato seedlings and fruits were recorded after removal of insects. Nymphs and adults of these mirids caused necrotic rings on the leaflets, but no injury was observed on stem and petioles. The necrotic rings on leaflets consisted of blemishes, characterized by feeding punctures surrounded by a yellowish, bleached area. The number of necrotic rings did not exceed one per individual mirid and seedlings developed normally. Nymphs also caused feeding punctures on tomato fruit, but in even lower numbers than on leaflets. Two weeks after the start of the experiment the tomato fruit still looked fresh and feeding punctures had disappeared. Adults did not cause any injury to tomato fruit. The results indicate that nymphs and adults of these zoophytophagous mirids cause little injury to tomato seedlings and fruit, even when present in high densities and in the absence of prey, making them interesting candidates for biological control.

FRAP to Characterize Molecular Diffusion and Interaction in Various Membrane Environments.

Fluorescence recovery after photobleaching (FRAP) is a standard method used to study the dynamics of lipids and proteins in artificial and cellular membrane systems. The advent of confocal microscopy two decades ago has made quantitative FRAP easily available to most laboratories. Usually, a single bleaching pattern/area is used and the corresponding recovery time is assumed to directly provide a diffusion coefficient, although this is only true in the case of unrestricted Brownian motion. Here, we propose some general guidelines to perform FRAP experiments under a confocal microscope with different bleaching patterns and area, allowing the experimentalist to establish whether the molecules undergo Brownian motion (free diffusion) or whether they have restricted or directed movements. Using in silico simulations of FRAP measurements, we further indicate the data acquisition criteria that have to be verified in order to obtain accurate values for the diffusion coefficient and to be able to distinguish between different diffusive species. Using this approach, we compare the behavior of lipids in three different membrane platforms (supported lipid bilayers, giant liposomes and sponge phases), and we demonstrate that FRAP measurements are consistent with results obtained using other techniques such as Fluorescence Correlation Spectroscopy (FCS) or Single Particle Tracking (SPT). Finally, we apply this method to show that the presence of the synaptic protein Munc18-1 inhibits the interaction between the synaptic vesicle SNARE protein, VAMP2, and its partner from the plasma membrane, Syn1A.

Sodium hypochlorite solution penetration into human dentine: a histochemical evaluation.

The aim of this study was to evaluate exvivo the penetration depth of sodium hypochlorite solutions, with and without surfactants, into human dentine using a histochemical stain and the bleaching ability of NaOCl. Extracted maxillary central incisors were decoronated and their root canals were shaped to a size 30, .07 taper. Dentinal tubules were stained with 10% copper sulphate solution followed by a 1% rubeanic acid alcohol solution under vacuum. Specimens were irrigated with 5 mL of Niclor 5 (5.25% NaOCl solution) or 5 mL of Hypoclean (5.25% NaOCl solution + surfactants) according to the corresponding treatment group, for 2min. A transverse section was obtained in the middle portion of the apical, middle and coronal thirds of each tooth. Under microscopic examination, irrigant penetration was evaluated by measuring the following: the bleached circumference of the root canal with respect to the stained circumference; bleached areas, mean and maximum penetration depth. For statistical analysis, Pearson's chi-squared test and one-way anova were used. Only 30% of dentine tubules in the apical portions were stained; therefore, these were excluded from further comparisons. In the middle and coronal thirds, the average bleached circumference of the root canal was 80-99% of the stained circumference and the bleached area was 73757-135107μm2 . The average penetration depth ranged from 39 to 62μm and maximum penetration from 74 to 131μm. For all reported results, no differences within and between groups were observed (P=1). No differences in penetration of irrigants with and without surfactants into dentinal tubules were observed in the middle and coronal thirds of incisor teeth.

Photo-oxidative sunscald of apple: Effects of temperature and light on fruit peel photoinhibition, bleaching and short-term tolerance acquisition

Sunscald of apple (Malus×domestica Borkh.) fruit is a major cause for economical losses. It is widely accepted that exposure to high temperature and light increases the incidence and severity of this fruit injury, but the separate contribution of each factor and the mechanisms involved in the injury development in apples are not well understood. The present study aimed at the quantification of both temperature and light required for photo-oxidative sunscald development and for tolerance acquisition, under controlled conditions. In mid-summer, immature green ‘Smoothie’ apples from the inner (shaded) part of the canopy were picked biweekly and placed in the dark for 48h at 25°C for decondidting. Fruit were then exposed to a variety of temeprature and light regimes. Sunscald injury developed only when peel temperature exceeded 40°C and was light-dependent. Maximum tolerance to sunscald was acquired in fruit pre-exposed to 38°C for 24h. This temporary tolerance gradually diminished with storage time at 25°C. Development of brown stains within the bleached peel areas increased with temperature. Fv/Fm was negatively correlated with PFD and the duration of exposure to temperatures above 40°C. Threshold values of Fv/Fm required for bleaching and browning of the peel were 0.11 and 0.072, respectively. A ‘photo-destructive quantum’ (PDQ) was characterized as the minimum absorbed energy required for peel bleaching. The calculated PDQ diminished with the rise in temperature. Pre-treatment with 5 and 10mgL−1 methyl viologen increased fruit susceptibility to sunscald compared to controls, whereas 1mgL−1 increased fruit tolerance to the combined injurious effect of light and heat. We conclude that sunscald is an expression of photo-oxidative stress in the fruit peel which is facilitated by peel temperatures above 40°C. Short-term field tolerance is acquired by insolation at sub-injurious temperatures, but this tolerance is rather weak and cannot accommodate the harsh atmospheric conditions which prevail in the Israeli summer.

Remote detection of fluid-related diagenetic mineralogical variations in the Wingate Sandstone at different spatial and spectral resolutions

Well-exposed eolian units of the Jurassic system on the Colorado Plateau including the Wingate Sandstone, show prominent color variations throughout southeastern Utah due to diagenetic changes that include precipitation and/or removal of iron oxide, clay, and carbonate cement. Spatially variable characteristic diagenetic changes suggest fluid-rock interactions through the sandstone. Distinctive spectral signatures of diagenetic minerals can be used to map diagenetic mineral variability and possibly fluid-flow pathways. The main objective of this work was to identify characteristic diagenetic minerals, and map their spatial variability from regional to outcrop scale in Wingate Sandstone exposures of Lisbon Valley, Utah. Laboratory reflectance spectroscopy analysis of the samples facilitated identification of diagnostic spectral characteristics of the common diagenetic minerals and their relative abundances between altered and unaltered Wingate Sandstone. Comparison of reflectance spectroscopy with satellite, airborne, and ground-based imaging spectroscopy data provided a method for mapping and evaluating spatial variations of diagenetic minerals. The Feature-oriented Principal Component Selection method was used on Advanced Spaceborne Thermal Emission and Reflection Radiometer data so as to map common mineral groups throughout the broader Wingate Sandstone exposure in the area. The Minimum Noise Fraction and Spectral Angle Mapper methods were applied on airborne HyMap and ground-based hyperspectral imaging data to identify and map mineralogical changes. The satellite and airborne data showed that out of 25.55km2 total exposure of Wingate Sandstone in Lisbon Valley, unaltered sandstone cover 12.55km2, and altered sandstone cover 8.90km2 in the northwest flank and 5.09km2 in the southern flank of the anticline. The ground-based hyperspectral data demonstrated the ability to identify and map mineral assemblages with two-dimensional lateral continuity on near-vertical rock faces. The results showed that 39.71% of the scanned outcrop is bleached and 20.60% is unbleached while 6.33% remain unclassified, and 33.36% is masked-out as vegetation. The bleached and unbleached areas are alternating throughout the vertical face of the outcrop. The relative hematite abundance observed in the unbleached areas are somewhat symmetrical. This indicates fairly similar reaction intensities along the upper and lower reaction fronts observed in the vertical section. The distribution geometry and relative abundances of diagenetic minerals not only suggest multiple paths of fluid-flow in Wingate Sandstone but also provides some insight about relative direction of past fluid-flow.