Bisphenol A Derivatives Research Articles

Effects and risk assessment of halogenated bisphenol A derivatives on human follicle stimulating hormone receptor: An interdisciplinary study

Halogenated bisphenol A (BPA) derivatives are produced during disinfection treatment of drinking water or are synthesized as flame retardants (TCBPA or TBBPA). BPA is considered as an endocrine disruptor especially on human follicle-stimulating hormone receptor (FSHR). Using a global experimental approach, we assessed the effect of halogenated BPA derivatives on FSHR activity and estimated the risk of halogenated BPA derivatives to the reproductive health of exposed populations. For the first time, we show that FSHR binds halogenated BPA derivatives, at 10 nM, a concentration lower than those requires to modulate the activity of nuclear receptors and/or steroidogenesis enzymes. Indeed, bioluminescence assays show that FSHR response is lowered up to 42.36 % in the presence of BPA, up to 32.79 % by chlorinated BPA derivatives and up to 27.04 % by brominated BPA derivatives, at non-cytotoxic concentrations and without modification of basal receptor activity. Moreover, molecular docking, molecular dynamics simulations, and site-directed mutagenesis experiments demonstrate that the halogenated BPA derivatives bind the FSHR transmembrane domain reducing the signal transduction efficiency which lowers the cellular cAMP production and in fine disrupts the physiological effect of FSH. The potential reproductive health risk of exposed individuals was estimated by comparing urinary concentrations (through a collection of human biomonitoring data) with the lowest effective concentrations derived from in vitro cell assays. Our results suggest a potentially high concern for the risk of inhibition of the FSHR pathway. This global approach based on FSHR activity could enable the rapid characterization of the toxicity of halogenated BPA derivatives (or other compounds) and assess the associated risk of exposure to these halogenated BPA derivatives.

Bisphenol A and bisphenol AF co-exposure induced apoptosis of human ovarian granulosa cells via mitochondrial dysfunction

Bisphenol A (BPA) is a synthetic chemical primarily utilized in the manufacturing of polycarbonate plastics and epoxy resins that are present in various consumer products. While the BPA impacts on female reproductive toxicity have been widely investigated, very little is currently identified about the mixed toxicity of BPA and bisphenol AF (BPAF), another common BPA derivative that is used in many industrial applications. In this study, we assessed the effect of co-exposure of BPA (30 and 50 μM) and BPAF (3 and 5 μM) on mitochondrial dysfunction in human granulosa cells (KGN cells) for 24 h. Our results exhibited that high-concentration bisphenol individual or their mixture exposure of KGN cells induced significant mitochondrial dysfunction by reducing mitochondrial mass, reducing ATP production, and damaging the mitochondrial respiratory chain. In addition, we found that the combination of BPA and BPAF significantly induced mitochondrial stress by increasing calcium levels and the production of ROS in mitochondria. Mitochondrial stress induced by BPA and BPAF was determined to be a mechanism that promoted cell apoptosis after pretreating the cells with the mitochondrial-targeted antioxidant and the calcium chelator. Our results provide novel evidence of the cytotoxicity of mixtures of different bisphenol compounds.

Analysis of Resin-Based Dental Materials' Composition Depending on Their Clinical Applications.

The objective of this study was to detail the monomer composition of resin-based dental materials sold in the market in 2023 and to evaluate the proportion of bisphenol A (BPA)-derivatives in relation to their applications. A search on manufacturers' websites was performed to reference resin-based dental materials currently on the European market (including the European Union (EU) and United Kingdom (UK). Their monomer composition was determined using material-safety data sheets and was completed by a search on the PubMed database. Among the 543 material compositions exploitable, 382 (70.3%) contained BPA derivatives. Among them, 56.2% contained BisGMA and 28% BisEMA, the most frequently reported. A total of 59 monomers, of which six were BPA derivatives, were found. In total, 309 materials (56.9%) contained UDMA and 292 (53.8%) TEGDMA. Less than one third of materials identified contained no BPA derivatives. These proportions vary a lot depending on their applications, with materials dedicated to the dental care of young populations containing the highest proportions of BPA-derivative monomers. The long-term effects on human health of the different monomers identified including BPA-derivative monomers is a source of concern. For children and pregnant or lactating women arises the question of whether to take a precautionary principle and avoid the use of resin-based dental materials likely to release BPA by opting for alternative materials.

Bisphenol a modification and how its structure influences human serum albumin binding force

Bisphenol A (BPA) is an environmental hormone with substantial physiological toxicity to the human body. Three electron-withdrawing derivatives of BPA are synthesized in this study to reduce its toxicity. The interaction mechanism between BPA and its three derivatives with human serum albumin (HSA) is investigated using molecular docking, electrochemistry, circular dichroism spectrum analysis, and fluorescence spectroscopy. Temperature-dependent tests and time-resolved fluorescence spectra reveal that all four compounds dynamically quench the internal fluorescence of HSA. Based on molecular docking and site competition outcomes, four compounds are primarily bound to site I's active pocket. Thermodynamic parameters indicate that the compounds’ interaction with HSA is spontaneous, and introducing weak electron-withdrawing groups changes the action force. Circular dichroism and synchronous fluorescence measurements suggest four compounds impact HSA's structure. The substituents' electron attraction capacity determines their impact. Electrochemical studies examine the effect of electron-absorbing groups on the BPA and HSA binding capacity. Pharmacokinetics showed that nitro-substituted BPA may be a potential superior substitute for BPA. These results indicate crucial practical value, providing theoretical support for future research.

Halogenated bisphenol A derivatives potently inhibit human and rat 11β-hydroxysteroid dehydrogenase 1: Structure-activity relationship and molecular docking.

Chlorinated bisphenol A (BPA) derivatives are formed during chlorination process of drinking water, whereas bisphenol S (BPS) and brominated BPA and BPS (TBBPA and TBBPS) were synthesized for many industrial uses such as fire retardants. However, the effect of halogenated BPA and BPS derivatives on glucocorticoid metabolizing enzyme 11β-hydroxysteroid dehydrogenase 1 (11β-HSD1) remains unclear. The inhibitory effects of 6 BPA derivatives in the inhibition of human and rat 11β-HSD1 were investigated. The potencies for inhibition on human 11β-HSD1 were TBBPA (IC50, 3.87 μM) = monochloro BPA (MCBPA, 4.08 μM) = trichloro BPA (TrCBPA, 4.41 μM) > tetrachloro BPA (TCBPA, 9.75 μM) > TBBPS (>100 μM) = BPS (>100 μM), and those for rat 11β-HSD1 were TrCBPA (IC50, 2.76 μM) = MCBPA (3.75 μM) > TBBPA (39.58 μM) > TCBPA = TBBPS = BPS. All these BPA derivatives are mixed/competitive inhibitors of both human and rat enzymes. Molecular docking studies predict that MCBPA, TrCBPA, TCBPA, and TBBPA all bind to the active site of human 11β-HSD1, forming hydrogen bonds with catalytic residue Ser170 except TCBPA. Regression of the lowest binding energy with IC50 values revealed a significant inverse linear regression. In conclusion, halogenated BPA derivatives are mostly potent inhibitors of human and rat 11β-HSD1, and there is structure-dependent inhibition.

Bisphenol A and chlorinated derivatives of bisphenol A assessment in end stage renal disease patients: Impact of dialysis therapy

Patients with end stage kidney disease treated by dialysis (ESKDD) process dialysis sessions to remove molecules usually excreted by kidneys. However, dialysis therapy could also contribute to endocrine disruptors (ED) burden. Indeed, materials like dialyzer filters, ultrapure dialysate and replacement fluid could exposed ESKDD patients to Bisphenol A (BPA) and chlorinated derivatives of BPA (ClxBPAs). Thus, our aim was to compare BPA and ClxBPAs exposure between ESKDD patients, patients with stage 5 chronic kidney disease (CKD5) not dialyzed and healthy volunteers. Then we describe the impact of a single dialysis session, according to dialysis modalities (hemodialysis therapy (HD) versus online hemodiafiltration therapy (HDF)) and materials used with pre-post BPA and ClxBPAs concentrations. The plasma levels of BPA and four ClxBPAs, were assessed for 64 ESKDD patients in pre and post dialysis samples (32 treated by HD and 32 treated by HDF) in 36 CKD5 patients and in 24 healthy volunteers. BPA plasma concentrations were 22.5 times higher for ESKDD patients in pre-dialysis samples versus healthy volunteers (2.208 ± 5.525 ng/mL versus 0.098 ± 0.169 ng/mL) (p < 0.001). BPA plasma concentrations were 16 times higher for CKD5 patients versus healthy volunteers, but it was not significant (1.606 ± 3.230 ng/mL versus 0.098 ± 0.169 ng/mL) (p > 0.05). BPA plasma concentrations for ESKDD patients in pre-dialysis samples were 1.4 times higher versus CKD5 patients (2.208 ± 5.525 ng/mL versus 1.606 ± 3.230 ng/mL) (p < 0.001). For healthy volunteers, ClxBPAs were never detected, or quantified while for CKD5 and ESKDD patients one ClxBPAs at least has been detected or quantified in 14 patients (38.8%) and 24 patients (37.5%), respectively. Dialysis therapy was inefficient to remove BPA either for HD (1.983 ± 6.042 ng/mL in pre-dialysis versus 3.675 ± 8.445 ng/mL in post-dialysis) or HDF (2.434 ± 5.042 ng/mL in pre-dialysis versus 7.462 ± 15.960 ng/mL in post dialysis) regarding pre-post BPA concentrations (p > 0.05). The same result was observed regarding ClxBPA analysis. Presence of polysulfone in dialyzer fibers overexposed ESKDD patients to BPA in pre-dialysis samples with 3.054 ± 6.770 for ESKDD patients treated with a polysulfone dialyzer versus 0.708 ± 0.638 (p = 0.040) for ESKDD patients treated without a polysulfone dialyzer and to BPA in post-dialysis samples with 6.629 ± 13.932 for ESKDD patients treated with a polysulfone dialyzer versus 3.982 ± 11.004 (p = 0.018) for ESKDD patients treated without a polysulfone dialyzer. This work is to our knowledge the first to investigate, the impact of a dialysis session and materials used on BPA and ClxBPAs plasma concentrations and to compare these concentrations to those found in CKD5 patients and in healthy volunteers.

Ecotoxicological Evaluation of Bisphenol A and Alternatives: A Comprehensive In Silico Modelling Approach.

Bisphenol A (BPA), a compound widely used in industrial applications, has raised concerns due to its environmental impact. As a key component in the manufacture of polycarbonate plastics and epoxy resins used in many consumer products, concerns about potential harm to human health and the environment are unavoidable. This study seeks to address these concerns by evaluating a range of potential BPA alternatives, focusing on their ecotoxicological properties. The research examines 76 bisphenols, including BPA derivatives, using a variety of in silico ecotoxicological models, although it should be noted that these models were not developed exclusively for this particular class of compounds. Consequently, interpretations should be made with caution. The results of this study highlight specific compounds of potential environmental concern and underscore the need to develop more specific models for BPA alternatives that will allow for more accurate and reliable assessment.

Halogenated bisphenol A derivatives potently inhibit human, rat, and mouse gonadal 3β-hydroxysteroid dehydrogenases: Structure-activity relationship and in silico molecular docking analysis

Bisphenol A (BPA) is a widely used plastic material, and halogenated BPA derivatives are formed either by synthesis or environmental processes. However, the effect of halogenated bisphenols on steroidogenesis remains unclear. The aim of this study was to compare inhibition of 6 BPA derivatives on gonadal 3β-hydroxysteroid dehydrogenases (3β-HSDs) in three species (human, rat, and mouse). The inhibition on human 3β-HSD2 was tetrabromo BPA (TBBPA, IC50, 1.01 μM)>trichloro BPA (TrCBPA, 3.95 μM)>tetrachloro BPA (TCBPA, 4.14 μM)>monochloro BPA (MCBPA, 4.74 μM)>others with TrCBPA of competitive, TBBPA of noncompetitive and MCBPA/TCBPA of mixed inhibition. The inhibition on rat 3β-HSD1 was TCBPA (1.68 μM)>TrCBPA (1.72 μM)>MCBPA (2.80 μM)>BPA>others with mixed inhibition. The inhibition on mouse 3β-HSD6 was TrCBPA (1.59 μM) >MCBPA (3.36 μM)>TCBPA (3.72 μM)>others with mixed inhibition. Molecular docking analysis showed that TBBPA, TrCBPA, and TCBPA bind to steroid active sites, contacting with catalytic residue Tyr154 of human 3β-HSD2. MCBPA, TrCBPA, and TCBPA bind to steroid active site of rat 3β-HSD1. MCBPA and TrCBPA bind to active site of mouse 3β-HSD6. Regression of lowest binding energy values with Ki values revealed a significant negative linear regression (P < 0.05). In conclusion, halogenated BPA derivatives are more potent inhibitors of three 3β-HSDs than BPA and there is structure-dependent inhibition. SynopsisChlorinated bisphenol derivatives after water chlorination process and other halogenated bisphenols effectively inhibit human and rat 3β-HSD activity, thereby leading to steroid hormone deficiency.

Developmental neurotoxic effects of bisphenol A and its derivatives in Drosophila melanogaster

As a result of the ban on bisphenol A (BPA), a hormone disruptor with developmental neurotoxicity, several BPA derivatives (BPs) have been widely used in industrial production. However, there are no effective methods for assessing the neurodevelopmental toxic effects of BPs. To address this, a Drosophila exposure model was established, and W1118 was reared in food containing these BPs. Results showed that each BPs displayed different semi-lethal doses ranging from 1.76 to 19.43 mM. Exposure to BPs delayed larval development and affected axonal growth, resulting in the abnormal crossing of the midline of axons in the β lobules of mushroom bodies, but the damage caused by BPE and BPF was relatively minor. BPC, BPAF, and BPAP have the most significant effects on locomotor behavior, whereas BPC exhibited the most affected social interactions. Furthermore, exposure to high-dose BPA, BPC, BPS, BPAF, and BPAP also significantly increased the expression of Drosophila estrogen-related receptors. These demonstrated that different kinds of BPs had different levels of neurodevelopmental toxicity, and the severity was BPZ > BPC and BPAF > BPB > BPS > BPAP ≈ BPAl ≈ BPF > BPE. Therefore, BPZ, BPC, BPS, BPAF, and BPAP should be evaluated as potential alternatives to BPA.

Halogen atoms determine the inhibitory potency of halogenated bisphenol A derivatives on human and rat placental 11β-hydroxysteroid dehydrogenase 2.

Some halogenated bisphenol A (BPA) derivatives (tetrabromobisphenol A, TBBPA, and tetrachlorobisphenol A, TCBPA) are produced in a high volume and exist in PM2.5 after waste burning. 11β-Hydroxysteroid dehydrogenase 2 (11β-HSD2) is a critical enzyme for placental function. However, whether halogenated bisphenols inhibit 11β-HSD2 and the mode of action remains unclear. The objective of this study was to investigate BPA derivatives on human and rat placental 11β-HSD2. The inhibitory strength on human 11β-HSD2 was TBBPA (IC50, 0.665μM)>TCBPA (2.22μM)>trichloro BPA (TrCBPA, 19.87μM)>tetrabromobisphenol S (TBBPS, 36.76μM)>monochloro BPA (MCBPA, 104.0μM)>BPA (144.9μM)>bisphenol S. All chemicals are mixed and competitive inhibitors. Rat 11β-HSD2 was less sensitive to BPA derivatives, with TBBPA (IC50, 96.63μM)>TCBPA (99.69μM)>TrCBPA (104.1μM)>BPA (117.1μM)>others. Docking analysis showed that BPA derivatives bind steroid active sites. Structure-activity relationship revealed that halogen atoms and LogP were inversely correlated with inhibitory strength on human 11β-HSD2, while LogS and polar desolvation energy were positively correlated with the inhibitory strength. In conclusion, halogenated BPA derivatives are mostly potent inhibitors on human 11β-HSD2 and there is structure-dependent inhibition.

A novel strategy for foodstuff can coatings: Hybrid resinous materials beside silica nanoparticles

For many years, Bisphenol A (BPA) based epoxy resins have been used as coating material for foodstuff cans because of their appropriate properties. Recently, with attention to the harmful health effects of BPA derivatives, limitation of the usage of epoxy resins has escalated. In this research, using Taguchi experimental design method, different nanocomposite coatings based on hybrid resinous materials containing different amounts of epoxy and polyester and silica nanoparticles were formulated. The migration properties of formulated coatings were investigated based on the standard methods. The results showed that the 45 wt.% replacement of epoxy by polyester resin in combination with 2 wt. % of nano silica, had not any inverse effect on needed mechanical, physical and chemical properties of optimized formulation and, at the same time, migration of BPA and toxic materials were in the acceptable ranges, based on the EN1186-EU 10:2011 standard.

Quantification of the Conjugated Forms of Dichlorobisphenol A (3,3'-Cl 2 BPA) in Rat and Human Plasma Using HPLC-MS/MS.

Bisphenol A (BPA) is a ubiquitous contaminant that has endocrine-disrupting effects. Chlorinated derivatives of BPA are formed during chlorination of drinking water and have higher endocrine-disrupting activity. Dichlorobisphenol A (Cl 2 BPA) is the most abundant chlorinated BPA derivative found in several human biological matrices. Recent in vitro experiments have shown that Cl 2 BPA is metabolized in sulpho- and glucuro-conjugated compounds. To date, no assay has been developed to quantify the sulfo- and glucuro-conjugates of 3,3'-Cl 2 BPA (3,3'-Cl 2 BPA-S and 3,3'-Cl 2 BPA-G, respectively). A high-performance liquid chromatography-tandem mass spectrometry assay for the determination of 3,3'-Cl 2 BPA conjugated forms in plasma samples was developed and validated according to the European Medicines Agency guidelines. Quantification was performed in the multiple reaction monitoring mode for all target analytes using a SCIEX 6500 + tandem mass spectrometer with an electrospray source operating in the negative ionization mode. Chromatographic separation was achieved using a C18 column maintained at 40°C and a binary mobile phase delivered in the gradient mode at a flow rate of 0.35 mL/min. Sample was prepared via simple precipitation using acetonitrile. The assay was validated and applied to rat and human plasma samples. Linearity was demonstrated over the range of 0.006-25 ng/mL for 3,3'-Cl 2 BPA-G and 0.391-100 ng/mL for 3,3'-Cl 2 BPA-S. Intraday and interday bias values were in the 95%-109% range, and the imprecision <9%. Internal standard corrected matrix effects were also investigated. This method enabled quantification of the conjugated forms of 3,3'-Cl 2 BPA in plasma samples. This is the first report on the development and validation of an analytical method for the quantification of 3,3'-Cl 2 BPA-G and 3,3'-Cl 2 BPA-S in the plasma matrix. This study is also the first report on the in vivo occurrence of these metabolites.

Dental Materials and Bisphenol-A Exposures

&#x0D; The utility of dental materials to posing oral diseases have impact in the risk of Bisphenol A (BPA) exposure which can be harmful to human organs. BPA used in dentistry is related to the production of polycarbonate plastics and epoxy resins. For instance, composite filling materials and dental sealant are containing BPA that can promote risk to endocrine-disrupting, estrogenic effect, and renal exposure. The current study is reviewing the BPA exposures of dental materials and it impact risk to the systemic health. This systematic review critically evaluates, and the information gathered form several literatures. The source of these articles was Pub Med and Web of Science, search done with the following terms: BPA of dental materials, BPA exposure, BPA and health risks, BPA, and oral health. BPA exposure found in oral mucosa and saliva after the application of BPA-containing dental materials. BPA derivatives used in dental products have not been evaluated for the endocrine disruptor, estrogenicity. BPA exposures can be absorbed through the oral mucosa and may lead to internal exposures the absorption of BPA from the gastrointestinal tract. Manufacturers should be required to report complete information on the chemical composition of dental materials and strict precaution application techniques must be considered by the practitioner.

High cytotoxicity of a degraded TBBPA, dibromobisphenol A, through apoptotic and necrosis pathways

Halogenated flame retardants comprising bisphenol A (BPA) derivatives, such as tetrabromobisphenol A (TBBPA), have been studied their adverse effects on human health. However, despite the fact that these halogenated BPAs are easily degraded in the environment, the risks to living organisms due to these degraded products have mostly been overlooked. To evaluate the potential toxicity of degraded TBBPAs and related compounds, we examined the cytotoxicity of halogenated bisphenol A derivatives possessing one to four halogen atoms in vitro. The results indicated that the degraded TBBPA derivatives exhibited strong cytotoxicity against HeLa cells than TBBPA. Interestingly, the di-halogenated BPA derivatives possessing two halogen atoms exhibited the strongest cytotoxicity among tested compounds. In addition, a lactate dehydrogenase release assay, fluorescence spectroscopy and flow cytometry results indicated that dibromo-BPA and diiodo-BPA induced both apoptotic and necrotic cell death by damaging the cell membranes of HeLa cells. Moreover, Escherichia coli growth was inhibited in the presence of dehalogenated TBBPA and related compounds. These findings suggest that halogenated BPA derivatives that leak from various flame-retardant-containing products require strict monitoring, as not only TBBPA but also its degraded products in environment can exert adverse effects to human health.

Bio-based Non-estrogenic Dimethacrylate Dental Composite from Cloves

Bisphenol A (BPA), as an endocrine disruptor derived from petroleum-based chemicals, has been prohibited by several regulatory agencies for use in a wide variety of consumer products. For the sake of reducing human exposure to BPA derivatives and in the context of sustainability, it is far-reaching to develop high-performance and low-toxic materials from bountiful biomass sources. The objective of this work was to synthesize 2 bio-based dimethacrylate monomers, 2,2′-dially-4,4′-dimethoxy-5,5′-diglycerolate acrylatediphenylmethane (BEF-EA) and 2,2′-dially-4,4′-dimethoxy-5,5′-diglycerolate methacrylatediphenylmethane (BEF-GMA), using eugenol as the raw material. The estrogenic activity of bio-based bisphenol 2,2′-dially-4,4′-dimethoxy-5,5′-dihydroxydiphenylmethane (BEF) was evaluated and compared with estrogen and commercial bisphenols. After photopolymerization of the di(meth)acrylates diluted with tri(ethyleneglycol) dimethacrylate (TEGDMA), bio-based visible light-curing materials were prepared, and their properties were systematically investigated. Notably, di(meth)acrylates BEF-GMA and BEF-EA derived from these nonestrogenic bio-based phenols exhibited improved biocompatibility and low viscosity (down to 220–280 Pa.s). BEF-GMA and BEF-EA resin matrix exhibits lower volumetric polymerization shrinkage (about 8.5%), high photopolymerization reactivity (>50% in 60 s), and mechanical properties (fracture energy >5.5 N mm; flexural strength of 87–91 MPa, etc), which were comparable or superior to commercial Bis-GMA. The respective bio-based composites still exhibit adequate properties. Therefore, introducing eugenol-based visible light-curable dimethacrylate monomers into dental materials is a potential strategy to establish green sustainability and biocompatible dental materials without BPA.

Food and beverage can coatings: A review on chemical analysis, migration, and risk assessment.

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography-tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.

Hepatic metabolism of chlorinated derivatives of bisphenol A (ClxBPA) and interspecies differences between rats and humans

During chlorination treatments of drinking water, aqueous bisphenol A (BPA) can react with chlorine to form chlorinated derivatives of BPA (mono, di, tri and tetra-chlorinated derivatives) or ClxBPA. These emerging substances are endocrine disruptors associated with obesity, type II diabetes (TD2M) and myocardial infarction. ClxBPA are present in different human biological matrices but their toxicokinetics remain unknown. The aim of this study was to measure and compare the metabolic kinetics in the liver of four ClxBPA (ClBPA, Cl2BPA, Cl3BPA and Cl4BPA) between compounds and between species (Sprague-Dawley rats vs humans). To estimate their metabolic constants (Vmax, Km, Intrinsic clearance), metabolic assays were performed in hepatocyte suspensions. Assays revealed that metabolic constants of ClxBPA can greatly vary depending on substances and species. While ClBPA and Cl2BPA show similar unbound intrinsic clearances (ClintU) in rat incubation media, values for Cl3BPA and Cl4BPA are very different (3.109 and 0.684mL/min/106 hepatocytes, respectively). Unlike in rats, human results are quite different as Cl3BPA and Cl4BPA have similar unbound intrinsic clearances, while ClBPA and Cl2BPA diverge (0.350 and 1.363mL/min/106 hepatocytes, respectively). In both species, Cl2BPA and Cl3BPA have relatively similar clearances, and ClBPA is very different from Cl4BPA. Although we quantified the proportion of sulfo- and glucurono-metabolites, other metabolites may have been formed (e.g., glutathione, disulfate, or oxidative metabolites). This study showed that chlorination had an impact on hepatic intrinsic clearance of ClxBPA in rats and humans and measured values will be valuable for the development of PBPK models for use in exposure assessment.

Thermoplastic polyurethane with good mechanical and processing performances via blocking and deblocking of isocyanates

AbstractIncreasing the molecular weight of polyurethanes (PU) is an effective way to improve its mechanical properties, while, it is at the expense of sacrificing processability. Congruent modification in both mechanical and processing performances is still a challenge. Here, bis‐phenol‐A (BPA) derivatives, including tetrachlorobisphenol‐A and tetrabromobisphenol‐A, were chosen as the extender to synthesize thermoplastic PUs (TPU) containing blocked isocyanate units. This blocked isocyanate has a temperature‐responsive reversible reaction due to phenol urethane bonds, so as to ensure the good mechanical properties at the service temperature and better processing performance via deblocking into smaller molecular weight at the processing temperature; in addition, negative induction effect of the halogen substituents endow BPA derivatives with deblocking reaction at lower temperature. The experimental results confirmed that the blocking reaction carried out completely at 70°C, and accompanying by the dramatical increase of molecular weight. The obvious deblocking reaction happened at 140°C, where the average molecular weight of TPUs decreased from 22,600 g/mol to 13,690 g/mol. Meanwhile, the melt flow index increased significantly with the extension of heating time, indicating that the PU has good processing properties. After the deblocking and re‐blocking reactions were repeated alternatively, there is almost no change in its tensile properties, molecular weight and melt outflow index within two cycles under air atmosphere. This article proposes a strategy of congruent modification in both mechanical and processing performances of TPU.

Investigation of Chemical Composition and Fiber-Occurrence in Inhalable Particulate Matter Obtained from Dry Cutting Processes of Carbon Fiber Reinforced Concrete Composite, Concrete and the Carbon Fiber Reinforcement Materials

The most commonly used construction material nowadays is steel-reinforced concrete which underlies corrosion and thus buildings are susceptible for structural collapses. Recently, a new construction material resistant to oxidation and with a higher tensile strength called carbon concrete composite (C3) was developed. The new material allows resource-saving constructions using carbon fiber instead of steel reinforcement materials embedded in a concrete matrix. C3 reinforcements consist of carbon fibers coated with an organic polymer matrix. In this study, abrasive dust from a dry cutting process of two C3 reinforcement materials, as well as a C3 material were investigated with respect to the occurrence of toxic fibers or harmful organic compounds in the inhalable particulate matter (PM) fractions PM2.5 and PM10. It could be shown that the ratio between elemental and organic carbon in PM10 is dependent on the shape of the C3 reinforcement material due to different mechanisms of PM formation. This could have an impact on the toxicity of different C3 reinforcement materials. Harmful fibers according to the World Health Organization (WHO) definition like they are found in asbestos concrete were not found. However, bisphenol A (BPA) as well as the PAHs phenanthrene, anthracene, fluoranthene and pyrene were found due to pyrolysis of the organic matrix material at the edge of the sawblade differentiating the Carcinogenic Equivalency (TEQ) of investigated materials and their PM fractions. Furthermore, derivatives of BPA occurred in abrasive dust from C3 reinforcement materials potentially leading to genotoxicity and reproductive toxicity.

Discovery of New Protein Targets of BPA Analogs and Derivatives Associated with Noncommunicable Diseases: A Virtual High-Throughput Screening.

Background:Bisphenol A analogs and derivatives (BPs) have emerged as new contaminants with little or no information about their toxicity. These have been found in numerous everyday products, from thermal paper receipts to plastic containers, and measured in human samples.Objectives:The objectives of this research were to identify in silico new protein targets of BPs associated with seven noncommunicable diseases (NCDs), and to study their protein–ligand interactions using computer-aided tools.Methods:Fifty BPs were identified by a literature search and submitted to a virtual high-throughput screening (vHTS) with 328 proteins associated with NCDs. Protein–protein interactions between predicted targets were examined using STRING, and the protocol was validated in terms of binding site recognition and correlation between in silico affinities and in vitro data.Results:According to the vHTS, several BPs may target proteins associated with NCDs, some of them with stronger affinities than bisphenol A (BPA). The best affinity score (the highest in silico affinity absolute value) was obtained after docking 4,4′-bis(N-carbamoyl-4-methylbenzensulfonamide)diphenylmethane (BTUM) on estradiol 17-beta-dehydrogenase 1 (). However, other molecules, such as bisphenol A bis(diphenyl phosphate) (BDP), bisphenol PH (BPPH), and Pergafast 201 also exhibited great affinities (top 10 affinity scores for each disease) with proteins related to NCDs.Discussion:Molecules such as BTUM, BDP, BPPH, and Pergafast 201 could be targeting key signaling pathways related to NCDs. These BPs should be prioritized for in vitro and in vivo toxicity testing and to further assess their possible role in the development of these diseases. https://doi.org/10.1289/EHP7466