Copper Bioremoval Research Articles

Bioremoval of copper by filamentous fungi isolated from contaminated soils of Puchuncaví-Ventanas Central Chile.

Pollution represents a high risk to plants, animals, and human beings, causing an imbalance and affecting the environment. Soil is considered a universal sink, containing the highest load of environmental pollution. Puchuncaví-Ventanas sector, decreed as a saturated contamination zone in 1993, is considered one of the most affected areas by industrial pollution and belongs to one of the 5 sacrifice zones of Chile. The localities of Puchuncaví and Ventanas have heavy metal pollution levels that exceed up to 99% of the limits allowed by Canadian standards. The objective of this study was to characterize heavy metal tolerance and removal potential of filamentous fungi isolated from polluted soils for their use in decontamination systems and in situ soil improvement. Six fungal strains were selected based on their tolerance and a high capability to accumulate heavy metals, achieving copper bioaccumulation of 84% (Mortierella sp. strain LG01), 49% (Clonostachys sp. strain CQ23) and 48-77.5% (Trichoderma sp. strain LM01A). Trichoderma sp. strain LM01A was able to remove 41% of copper from contaminated soil under ex situ conditions. Some fungal strains belong to beneficial fungal genera, which are used as bioproducts in agriculture. The results of this study highlighted the use of Trichoderma sp. in soils contaminated, which may be of special interest in agriculture due to the large amounts of copper sulfate still applied as a pesticide in Chile and the world.

Detoxification of Copper and Chromium via Dark Hydrogen Fermentation of Potato Waste by Clostridium butyricum Strain 92

The accumulation of various types of waste containing both organic and inorganic metal-containing compounds is extremely hazardous for living organisms. The possibility of polymer degradation, biohydrogen synthesis, and metal detoxification via the dark fermentation of model potato waste was investigated. For this purpose, the strict anaerobic strain was isolated and identified as Clostridium butyricum. The high efficiency of dark hydrogen fermentation of potatoes with yield of hydrogen in 85.8 ± 15.3 L kg−1 VSpotato was observed. The copperand chromium salts solutions were added to the culture fluid to obtain the concentrations of 50, 100, and 200 mg L−1 Cu(II) and Cr(VI) in the active phase of growth (19 h of cultivation). Metals at a concentration of 200 mg L−1 inhibited the fermentation process the most. The hydrogen yield decreased in 7.2 and 3.6 times to 11.9 ± 2.1 and 23.8 ± 5.6 L kg−1 VSpotato in the presence of 200 mg L−1 Cu(II) and Cr(VI), respectively. The efficiencies of the chromium bioremoval in all variants of the experiment were 100%, and those of copper bioremoval were about 90%. A pure culture of strict anaerobes Clostridium butyricum strain 92 was used for the first time for the detoxification of metals. The presented results confirmed the possibility of this promising strain application for industrial H2 production and the bioremediation of contaminated sites.

Bioremediation of copper by active cells of Pseudomonas stutzeri LA3 isolated from an abandoned copper mine soil

Copper bioremoval efficiency and bioaccumulation capacity of Pseudomonas stutzeri LA3 isolated from copper contaminated soil were investigated. P. stutzeri LA3 removed about 50% of Cu (II) at 50 mg l−1 of concentration and accumulated a maximum of 1.62 mg of Cu g−1 biomass dry weight. Bioremediation by P. stutzeri LA3 partially depended on the production of extracellular polymeric substances, composed of proteins and carbohydrates. Cell surface alterations were observed on the Cu (II) treated biomass through a scanning electron microscope (SEM). Energy dispersive spectrometer (EDX) investigation of Cu (II) treated biomass showed clear signals of Cu, confirming the presence of copper ions on the cell surface. Fourier transform infrared spectroscopy (FTIR) showed the contribution of functional groups such as hydroxyl (–OH), carboxyl (–COOH), amide and amine (–NH2) in the remediation process. Based on the results, the isolated strain P. stutzeri LA3 could serve as a potential candidate for copper due to its significant copper removal effeciency.

Screening of three phenol-degrading bacteria for copper bioremoval of copper

Aim: Potential microbial isolates for bioremoval of copper were collected from phenolic and heavy metal-contaminated soils and screened in copper-containing medium for determining the maximum tolerance level for copper.? Methodology: Bioremoval of copper was assessed using sodium diethyl dithiocarbamate assay. Physical and cultural conditions influencing copper bioremoval such as initial concentration, biomass dosage (inoculum volume), temperature and pH were optimised via one-factor-at-a-time. Results: The highest maximum tolerance level was displayed by Serratia sp. AQ5-03 at 600 mg l-1, while for Alcaligenes sp. AQ5-02 and Pseudomonas sp. AQ5-04 it was 500 mg l-1. The highest bioremoval for Alcaligenes sp. AQ5-02, Serratia sp. AQ5-03 and Pseudomonas sp. AQ5-04 was achieved at 20, 50 and 75 mg l-1, respectively. The optimum biomass dosage (inoculum volume) for both Serratia sp. AQ5-03 and Pseudomonas sp. AQ5-04 were 15%, whereas it was 10% for Alcaligenes sp. AQ5-02. The results also revealed that maximum bioremoval was achieved at pH 6 at an optimum temperature of 20?C for both Alcaligenes sp. AQ5-02 and Pseudomonas sp. AQ5-04, while Serratia sp. AQ5-03 showed optimum removal at pH 7 and at 30?C temperature. The maximum bioremoval efficiency for Alcaligenes sp. AQ5-02, Serratia sp. AQ5-03 and Pseudomonas sp were found to be 62, 57 and 70%, respectively. Interpretation: The results indicate that Alcaligenes sp. AQ5-02, Serratia sp. AQ5-03, Pseudomonas sp. AQ5-04 can be utilised as bioremoval agent since it possessed the highest bioremoval efficiency for copper remediation.

Copper(II) Bioremoval by a Rhizosphere Bacterium, Stenotrophomonas acidaminiphila MYS1-Process Optimization by RSM Using Box–Behnken Design

A copper-tolerant bacterium strain MYS1 was isolated from Brass effluent-contaminated Cynodon dactylon rhizosphere and identified as Stenotrophomonas acidaminipila by 16S rRNA analysis. Bacterium culture was enriched in copper(II) supplemented nutrient broth. Bacterial potential for copper(II) bioremoval was investigated under optimized parameters. Three parameters—pH, temperature and copper(II) concentration—were optimized through response surface methodology (RSM). Box–Behnken design (BBD) with quadratic model was selected. Seventeen experimental runs were carried out to get the desired response. Model’s significance was confirmed by high R 2 value (0.9941), low P value (<0.0001) and F value (131.32). Effect of different parameters on bioremoval of copper(II) was determined by response contour and surface graphs. Results showed that optimum values for copper(II) removal were obtained at pH (5.0), temperature (32.5 °C) and copper(II) concentration (250 mg/L). Under these optimized conditions, maximum bacterium growth (2.87 µg/mg) and copper(II) bioremoval (94.1%) were demonstrated after 120 and 168 h of incubation, respectively. High percentage of copper(II) removal at such a higher concentration confirmed the feasibility of bacterium Stenotrophomonas acidaminiphila MYS1 in copper bioremediation and industrial effluent treatment.

Bioremoval of Chromium, Copper and Cadmium by Bacillus cereus in Simulated Electroplating Wastewater

Heavy metal pollution is one of environmental problems, which is caused by the discharge of improperly treated industrial wastewater. Electroplating industry generates wastewater containing heavy metals, which include chromium, copper and cadmium. Biological treatment using bacteria has been considered as a new alternative for treatment of heavy metal containing wastewater. The bacteria play an important role in the bioremediation of heavy metal contaminated environment. Bacillus cereus was known as cosmopolitan bacteria with high resistance to pollutants. This study was conducted to measure the viability of two strains of Bacillus cereus in chromium, copper and zinc containing cultures, and the bioremoval efficiencies of the heavy metals.. The bioremoval efficiencies were measured using spectrophotometric method. The bacterial viability was measured according to the Optical Density of the culture. The results showed that both B. cereus strains were viable in culture containing chromium, copper, and cadmium with different concentrations. The highest tolerance of the bacteria was observed in chromium containing culture, where highest chromium bioremoval efficiency of 51.8% was performed by ATCC 9632 strain at chromium concentration of 102.4 mg/L, in varied concentration range up to 360 mg/L. Whereas the highest copper bioremoval efficiency of 100% was achieved in the cultures of B. cereus ATCC 1178 and ATCC 9632 at copper concentration of 2 mg/L in tested concentration range up to 10 mg/L. The highest cadmium bioremoval efficiency of 77% was achieved by ATCC 9632 strain at concentration of 15 mg/L in concentration range up to 25 mg/L Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

Characterization of Copper-Resistant Rhizosphere Bacteria from Avena sativa and Plantago lanceolata for Copper Bioreduction and Biosorption

Copper is a toxic heavy metal widely used to microbial control especially in agriculture. Consequently, high concentrations of copper residues remain in soils selecting copper-resistant organisms. In vineyards, copper is routinely used for fungi control. This work was undertaken to study copper resistance by rhizosphere microorganisms from two plants (Avena sativa L. and Plantago lanceolata L.) common in vineyard soils. Eleven rhizosphere microorganisms were isolated, and four displayed high resistance to copper. The isolates were identified by 16S rRNA gene sequence analysis as Pseudomonas putida (A1), Stenotrophomonas maltophilia (A2) and Acinetobacter sp. (A6), isolated from Avena sativa rhizosphere, and Acinetobacter sp. (T5), isolated from Plantago lanceolata rhizosphere. The isolates displayed high copper resistance in the temperature range from 25°C to 35°C and pH in the range from 5.0 to 9.0. Pseudomonas putida A1 resisted as much as 1,000mgL(-1) of copper. The isolates showed similar behavior on copper removal from liquid medium, with a bioremoval rate of 30% at 500mgL(-1) after 24h of growth. Speciation of copper revealed high copper biotransformation, reducing Cu(II) to Cu(I), capacity. Results indicate that our isolates are potential agents for copper bioremoval and bacterial stimulation of copper biosorption by Avena sativa and Plantago lanceolata.

Bioremediation of Copper-Contaminated Soil by Co-Application of Bioaugmentation and Biostimulation with Organic Nutrient

ABSTRACT This study investigates various factors affecting bioremoval of copper from experimentally contaminated soil by bioaugmentation with a metal-resistant microorganism (B1) accompanied with amendment of an organic matter (mustard oil cake). The initial contamination level reduced by 67% with this joint strategy compared to 13% by application of bioaugmentation. Increasing organic amendment concentration beyond 6 wt% did not significantly improve microbial growth and the extent of bioremediation due to increase of pH. The bioaccessible copper concentration, however, did not change significantly. Controlling pH by one-time application of ferrous sulfate (1 wt%) into the experimental run resulted in enhanced microbial growth. The copper concentration in soil and bioaccessible copper concentration reduced to 55% and 80% of the value obtained without pH control for the same period of incubation. This study suggests the potential of co-application of isolated metal-resistant bacteria (B1) and mustard oil cake amendment in conjunction with pH control for in situ bioremediation of copper-contaminated soil.

Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption

Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol) were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária) experimental station, Bento Gonçalves, RS, Brazil (29°09′53.92″S and 51°31′39.40″W) and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30°29′43.48″S and 53′32′37.87W). Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L−1 in 24 h. Contrarily isolate N11 (Bacillus pumilus) displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h). GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration.

Characterization of copper bioreduction and biosorption by a highly copper resistant bacterium isolated from copper-contaminated vineyard soil

Copper is an essential but toxic heavy metal that negatively impacts living systems at high concentration. This study presents factors affecting copper bioremoval (bioreduction and biosorption) by a highly copper resistant monoculture of Pseudomonas sp. NA and copper bioremoval from soil. Seven bacteria resistant to high concentration of Cu(II) were isolated from enrichment cultures of vineyard soils and mining wastes. Culture parameters influencing copper bioreduction and biosorption by one monoculture isolate were studied. The isolate was identified by 16S rRNA gene sequence analysis as a Pseudomonas sp. NA (98% similarity to Pseudomonas putida, Pseudomonas plecoglossicida and other Pseudomonas sp.). The optimal temperature for growth was 30 °C and bioremoval of Cu(II) was maximal at 35 °C. Considerable growth of the isolate was observed between pH 5.0 and 8.0 with the highest growth and biosorption recorded at pH 6.0. Maximal bioreduction was observed at pH 5.0. Cu(II) bioremoval was directly proportional to Cu(II) concentration in media. Pseudomonas sp. NA removed more than 110 mg L − 1 Cu(II) in water within 24 h through bioreduction and biosorption at initial concentration of 300 mg L − 1 . In cultures amended with 100 mg L − 1 , 20.7 mg L − 1 of Cu(II) was biologically reduced and more than 23 mg L − 1 of Cu(II) was biologically removed in 12 h. The isolate strongly promoted copper bioleaching in soil. Results indicate that Pseudomonas sp. NA has good potential as an agent for removing copper from water and soil.