Biopharmaceutical Performance Research Articles

Formulation development, characterization, and evaluation of bedaquiline fumarate – Soluplus® – solid dispersion

Bedaquiline fumarate (BQF) is classified as a BCS class II drug and has poor water solubility and dissolution rate, which ultimately compromises bioavailability. The objective of this study is to improve the biopharmaceutical properties of BQF through a solid dispersion system by using Soluplus®. Two solid dispersion systems were prepared i.e. binary solid dispersion (BSD) and ternary solid dispersion (TSD) where 14.31-fold and 20.43-fold increase in solubility of BQF was observed with BSD and TSD in comparison to BQF. In our previous research work, we explored the BSD and TSD of BQF with a crystalline polymer, poloxamer 188, which showed an increment in the solubility of BQF. In the current research, amorphous Soluplus® polymer was selected to formulate BSD and TSD with BQF and showed higher solubility than poloxamer 188. The various solid and liquid state characterization results confirmed the presence of an amorphous form of BQF inside solid dispersion. The Fourier transform infrared spectroscopy showed no chemical interactions between BQF and polymer. The cellular uptake results demonstrated higher uptake in Caco-2 cell lines. Pharmacokinetic studies showed enhanced solubility and bioavailability of TSDs. Hence, the present research shows a promising formulation strategy for enhancing the biopharmaceutical performance of BQF by increasing its solubility.

Supersaturable diacyl phospholipid dispersion for improving oral bioavailability of brick dust molecule: A case study of Aprepitant

This study aims to investigate the potential use of polymer inclusion in the phospholipid-based solid dispersion approach for augmenting the biopharmaceutical performance of Aprepitant (APT). Initially, different polymers were screened using the microarray plate method to assess their ability to inhibit drug precipitation in the supersaturated solution and HPMCAS outperformed the others. Later, the binary (BD) and ternary (TD) phospholipid dispersions were prepared using the co-solvent evaporation method. Solid-state characterization was performed using SEM and PXRD to examine the physical properties, while molecular interactions were probed through FTIR and NMR analysis. In vitro dissolution studies were performed in both fasted and fed state biorelevant media. The results demonstrated a substantial increase in drug release from BD and TD, approximately 4.8 and 9.9 times higher compared to crystalline APT in FaSSIF. Notably, TD also showed a lowered dissolution difference between fed and fasted states in comparison to crystalline APT, indicating a reduction in the positive food effect of APT. Moreover, we assessed the impact of polymer inclusion on permeation under in vitro biomimetic conditions. In comparison with the crystalline APT suspension, both BD and TD demonstrated approximately 3.3 times and 14 times higher steady-state flux (Jss values), respectively. This can be ascribed to the supersaturation and presence of drug-rich submicron particles (nanodroplets) along with the multiple aggregates of drug with phospholipids and polymer in the donor compartment, consequently resulting in a more substantial driving force for passive diffusion. Lastly, in vivo pharmacokinetic evaluation demonstrated the enhanced absorption of both TD and BD over the free drug suspension in the fasted state. This enhancement was evident through a 2.1-fold and 1.3-fold increase in Cmax and a 2.3-fold and 1.4-fold increase in AUC0-t, respectively. Overall, these findings emphasize the potential of polymer-based phospholipid dispersion in enhancing the overall biopharmaceutical performance of APT.

Development of direct compression Acetazolamide tablet with improved bioavailability in healthy human volunteers enabled by cocrystallization with p-Aminobenzoic acid

Pharmaceutical cocrystallization has been widely used to improve physicochemical properties of APIs. However, developing cocrystal formulation with proven clinical success remains scarce. Successful translation of a cocrystal to suitable dosage forms requires simultaneously improvement of several deficient physicochemical properties over the parent API, without deteriorating other properties critical for successful product development. In the present work, we report the successful development of a direct compression tablet product of acetazolamide (ACZ), using a 1:1 cocrystal of acetazolamide with p-aminobenzoic acid (ACZ-PABA). The ACZ-PABA tablet exhibits superior biopharmaceutical performance against the commercial tablet, DIAMOX® (250 mg), in healthy human volunteers, leading to more than 50 % reduction in the required dose.

Enhanced drug delivery and wound healing potential of berberine-loaded chitosan-alginate nanocomposite gel: characterization and in vivo assessment.

Berberine-encapsulated polyelectrolyte nanocomposite (BR-PolyET-NC) gel was developed as a long-acting improved wound healing therapy. BR-PolyET-NC was developed using an ionic gelation/complexation method and thereafter loaded into Carbopol gel. Formulation was optimized using Design-Expert® software implementing a three-level, three-factor Box Behnken design (BBD). The concentrations of polymers, namely, chitosan and alginate, and calcium chloride were investigated based on particle size and %EE. Moreover, formulation characterized in vitro for biopharmaceutical performances and their wound healing potency was evaluated in vivo in adult BALB/c mice. The particle distribution analysis showed a nanocomposite size of 71 ± 3.5 nm, polydispersity index (PDI) of 0.45, ζ-potential of +22 mV, BR entrapment of 91 ± 1.6%, and loading efficiency of 12.5 ± 0.91%. Percentage drug release was recorded as 89.50 ± 6.9% with pH 6.8, thereby simulating the wound microenvironment. The in vitro investigation of the nanocomposite gel revealed uniform consistency, well spreadability, and extrudability, which are ideal for topical wound use. The analytical estimation executed using FT-IR, DSC, and X-ray diffraction (XRD) indicated successful formulation with no drug excipients and without the amorphous state. The colony count of microbes was greatly reduced in the BR-PolyET-NC treated group on the 15th day from up to 6 CFU compared to 20 CFU observed in the BR gel treated group. The numbers of monocytes and lymphocytes counts were significantly reduced following healing progression, which reached to a peak level and vanished on the 15th day. The observed experimental characterization and in vivo study indicated the effectiveness of the developed BR-PolyET-NC gel toward wound closure and healing process, and it was found that >99% of the wound closed by 15th day, stimulated via various anti-inflammatory and angiogenic factors.

Quality by design aided self-nano emulsifying drug delivery systems development for the oral delivery of Benidipine: Improvement of biopharmaceutical performance

The primary objective of the research effort is to establish efficient solid self-nanoemulsifying drug delivery systems (S-SNEDDS) for benidipine (BD) through the systematic application of a quality-by-design (QbD)-based paradigm. Utilizing Labrafil M 2125 CS, Kolliphor EL, and Transcutol P, the BD-S-SNEDDS were created. The central composite design was adopted to optimize numerous components. Zeta potential, drug concentration, resistance to dilution, pH, refractive index, viscosity, thermodynamic stability, and cloud point were further investigated in the most efficient formulation, BD14, which had a globule size of 156.20 ± 2.40 nm, PDI of 0.25, zeta potential of −17.36 ± 0.18 mV, self-emulsification time of 65.21 ± 1.95 s, % transmittance of 99.80 ± 0.70%, and drug release of 92.65 ± 1.70% at 15 min. S-SNEDDS were formulated using the adsorption process and investigated via Fourier transform infrared spectroscopy, Differential scanning calorimeter, Scanning electron microscopy, and powder X-ray diffraction. Optimized S-SNEDDS batch BD14 dramatically decreased blood pressure in rats in contrast to the pure drug and the commercial product, according to a pharmacodynamics investigation. Accelerated stability tests validated the product’s stability. Therefore, the development of oral S-SNEDDS of BD may be advantageous for raising BD's water solubility and expanding their releasing capabilities, thereby boosting oral absorption.

Inclusion complexes of bedaquiline fumarate with β-cyclodextrin and its derivatives: In silico, in vitro and in vivo evaluation

Bedaquiline fumarate (BQF), a BCS class-II drug, shows dissolution rate-dependent absorption pattern, which results in poor biopharmaceutical performance. In this research, we formulated β-cyclodextrin (β-CD) and hydroxypropyl β-cyclodextrin (HP-β-CD) inclusion complexes (ICs) of BQF to improve its biopharmaceutical attributes. ICs were prepared by freeze drying method and characterized using NMR, FTIR, DSC, PXRD and polarised microscopy. These complexes were evaluated for in vitro dissolution and optimized BQF-HP-β-CD ICs was further evaluated for cytotoxicity, intestinal permeability, and in vivo pharmacokinetic studies. 1D and 2D NMR and FTIR confirmed hydrogen bonding between BQF and cyclodextrins. DSC, PXRD and polarised microscopy confirmed the amorphous nature of BQF in complexes. In vitro dissolution study showed 29.6 and 57.5-fold enhancement in dissolution efficiency (DE60) for BQF-β-CD and BQF-HP-β-CD IC, respectively, in comparison to BQF. The selected BQF-HP-β-CD IC was found to be compatible to Caco-2 cells and a 5-fold enhancement in the intestinal permeability. In vivo pharmacokinetic studies demonstrated an increase in Cmax and relative bioavailability of BQF with BQF-HP-β-CD IC in comparison to BQF suspension.

Cocrystallization of Gefitinib Potentiate Single-Dose Oral Administration for Lung Tumor Eradication via Unbalancing the DNA Damage/Repair.

Gefitinib (GEF) is a clinical medication for the treatment of lung cancer targeting the epidermal growth factor receptor (EGFR). However, its efficacy is remarkably limited by low solubility and dissolution rates. In this study, two cocrystals of GEF with co-formers were successfully synthesized using the recrystallization method characterized via Powder X-ray Diffraction, Fourier Transform Infrared Spectroscopy, and 2D Nuclear Overhauser Effect Spectroscopy. The solubility and dissolution rates of cocrystals were found to be two times higher than those of free GEF. In vitro cytotoxicity studies revealed that the cocrystals enhanced the inhibition of cell proliferation and apoptosis in A549 and H1299 cells compared to free GEF. In mouse models, GEF@TSBO demonstrated targeted, safe, and effective antitumor activity with only one-dose administration. Mechanistically, the GEF cocrystals were shown to increase the cellular levels of damaged DNA, while potentially downregulating PARP, thereby impairing the DNA repair machinery and leading to an imbalance between DNA damage and restoration. These findings suggest that the cocrystallization of GEF could serve as a promising adjunct to significantly enhance the physicochemical and biopharmaceutical performance for lung cancer treatment, providing a facial strategy to improve GEF anticancer efficiency with high bioavailability that can be orally administrated with only one dose.

The inherent AIE feature revealed the drug molecular state in cyclodextrin metal–organic framework for enhanced stability and absorption

The amorphous form of a drug can greatly improve the solubility and rates of dissolution for enhancing oral bioavailability. However, amorphous drugs tend to crystallize thus negating their solubility advantages. Here, we use a nanoconfinement strategy to prevent the crystallization of amorphous solids by loading the poorly soluble drug indomethacin (IMC) into a porous γ-cyclodextrin-based metal–organic framework (CD-MOF). The inherent aggregation-induced emission (AIE) property of IMC was successfully applied as a sensitive fluorescence imaging tool to visualize its molecular state in the solid form. A distinct high-energy, non-aggregated molecular state of IMC in CD-MOF was revealed by the AIE turn-off phenomenon together with other solid-state characterization methods. The IMC@CD-MOF exhibited excellent physical stability even when stored at high temperature or humidity. The high supersaturated drug solutions were immediately generated and maintained during the dissolution of IMC@CD-MOF, resulting in a great enhancement of in vivo bioavailability. The inherent AIE feature of drugs can facilitate the understanding of the structure–property relationship in complex delivery systems, which is essential for the design and optimization of drug carriers with desired stability and biopharmaceutical performance.

Quality and in vitro bioequivalence evaluation of different brands of amoxicillin + clavulanic acid (500 + 62.5) mg tablets distributed in Burkina Faso

In a previous study, we reported the evaluation of the physicochemical quality and in vitro bioequivalence of different brands of amoxicillin capsules 500 mg marketed in Burkina Faso. As our goal was to document the quality and biopharmaceutical performance of essential antibiotics marketed in resource-limited countries, we investigated here, the interchangeability with the originator of five brands of amoxicillin + clavulanic acid (500mg+62.5mg) tablets distributed in Burkina Faso. The physicochemical quality of the different brands was first verified according to the USP monograph. The comparative evaluation of the in vitro dissolution profiles was performed in three different pH environments (1.2 - 4.5 - 6.8) using statistical calculations of the difference (f1) and similarity (f2) factors. All brands of amoxicillin + clavulanic acid (500mg+62.5mg) tablets, including the originator, met USP specifications for weight uniformity, identification, content and dissolution of active ingredients. However, the similarity and difference factor values showed that two generic brands (B and E) did not have similar amoxicillin dissolution profiles to the comparator product in pH 4.5 media (f1 = 23,54 and 17.02; f2=35.96 and 46.90, respectively). Therefore, these two products cannot be used interchangeably with the originator. The other three generic brands were similar to the originator and can therefore probably be used interchangeably.

Unmet technological demands in orodispersible films for age-appropriate paediatric drug delivery.

Age-appropriateness of a formulation is the ability to deliver variable but accurate doses to the paediatric population in a safe and acceptable manner to improve medical adherence and reduce medication errors. Paediatric drug delivery is a challenging area of formulation research due to the existing gap in knowledge. This includes the unknown safety of excipients in the paediatric population, the need for an age-appropriate formulation, the lack of an effective taste-masking method and the lack of paediatric pharmacokinetic data and patient acceptability. It is equally important to establish methods for predicting the biopharmaceutical performance of a paediatric formulation as a function of age. Overcoming the challenges of existing technologies and providing custom-made solutions for the development of age-appropriate formulation is, therefore, a daunting task. Orodispersible films (ODF) are promising as age-appropriate formulations, an unmet need in paediatric drug delivery. New technological improvements in taste masking, improving solubility and rate of dissolution of insoluble drugs, the flexibility of dosing and extemporaneous preparation of these films in a hospital good manufacturing practises (GMP) setup using 3D printing can increase its acceptance among clinicians, patients and caregivers. The current review discusses the problems and possibilities in ODF technology to address the outstanding issues of age-appropriateness, which is the hallmark of patient acceptance and medical adherence in paediatrics.

Natural microbial surfactant containing self-nanoemulsifying formulation with improved performance of paclitaxel therapy: A newer avenue in breast cancer treatment

Due to the presence of a high concentration of surfactants (e.g., Cremophor EL, Tween 80), paclitaxel (PTX) drug delivery systems administered orally and intravenously demonstrate severe toxicity. In the current research work, a unique self-nanoemulsifying drug delivery system (SNEDDS) comprising surfactin, a microbial biosurfactant was used for reducing the formulation toxicity and improving the biopharmaceutical performance. The preformulation study including solubility analysis indicated suitability of corn oil as the natural lipophile. Nanoemulsion boundaries were delineated by aqueous titration of the lipid phase (ethyl oleate: plurol oleique), surfactants (Tween 80 and Surfactin) and cosolvent (Transcutol HP) to identify the optimum compositions on the basis of formulation quality attributes with globule size <250 nm, emulsification time <3 min and in vitro drug release >85% in 60 min. Biocompatibility evaluation of PTX-Surfactin SNEDDS on rat hepatocytes by H2DCF assay to determine the ROS level indicated an insignificant increase in fluorescence intensity, while PTX Tween 80-SNEDDS showed nearly 20% increase in ROS levels compared to the control cells. Furthermore, histopathology examination showed the absence of any signs of inflammation from intestinal segments treated with PTX Surfactin-SNEDDS, while PTX Tween 80-SNEDDS revealed infiltration of cells and the presence of inflammation on the intestinal villous microstructures. The anticancer activity evaluation by in vitro cytotoxicity on MCF-7 cells showed PTX Surfactin-SNEDDS and PTX Tween 80-SNEDDS with IC50 of 2.65 μM and 11.52 μM, respectively, while PTX suspension showed IC50 of 18.5 μM. Moreover, blank Surfactin-SNEDDS showed IC50 of 15.23 μM, while no cytotoxicity was observed for blank Tween 80-SNEDDS. Overall, the study interpreted high suitability of biosurfactant for developing the self-nanoemulsifying formulation of PTX with enhanced bioavailability, biocompatibility and synergistic improvement in the anticancer activity over the formulations containing synthetic surfactant.

Development and Evaluation of Amorphous Solid Dispersion of Riluzole with PBPK Model to Simulate the Pharmacokinetic Profile.

In the current work, screening of polymers viz. polyacrylic acid (PAA), polyvinyl pyrrolidone vinyl acetate (PVP VA), and hydroxypropyl methyl cellulose acetate succinate (HPMC AS) based on drug-polymer interaction and wetting property was done for the production of a stable amorphous solid dispersion (ASD) of a poorly water-soluble drug Riluzole (RLZ). PAA showed maximum interaction and wetting property hence, was selected for further studies. Solid state characterization studies confirmed the formation of ASD with PAA. Saturation solubility, dissolution profile, and in vivo pharmacokinetic data of the ASD formulation were generated in rats against its marketed tablet Rilutor. The RLZ:PAA ASD showed exponential enhancement in the dissolution of RLZ. Predicted and observed pharmacokinetic data in rats showed enhanced area under curve (AUC) and Cmax in plasma and brain with respect to Rilutor. Furthermore, a physiologically based pharmacokinetic (PBPK) model of rats for Rilutor and RLZ ASD was developed and then extrapolated to humans where physiological parameters were changed along with a biochemical parameter. The partition coefficient was kept similar in both species. The model was used to predict different exposure scenarios, and the simulated data was compared with observed data points. The PBPK model simulated Cmax and AUC was within two times the experimental data for plasma and brain. The Cmax and AUC in the brain increased with ASD compared to Rilutor for humans showing its potential in improving its biopharmaceutical performance and hence enhanced therapeutic efficacy. The model can predict the RLZ concentration in multiple compartments including plasma and liver.

Design-of-Experiment-Assisted Fabrication of Biodegradable Polymeric Nanoparticles: In Vitro Characterization, Biological Activity, and In Vivo Assessment.

Berberine (BER) is an alkaloid obtained from berberis plant having broad biological activities including anticancer. BER-encapsulated alginate (ALG)/chitosan (CHS) nanoparticles (BER-ALG/CHS-NPs) were developed for long-acting improved treatment in breast cancer. The surface of the NPs was activated by a conjugation reaction, and thereafter, the BER-ALG/CHS-NP surface was grafted with folic acid (BER-ALG/CHS-NPs-F) for specific targeting in breast cancer. BER-ALG/CHS-NPs-F was optimized by applying the Box-Behnken design using Expert design software. Moreover, formulations are extensively evaluated in vitro for biopharmaceutical performances and tested for cell viability, cellular uptake, and antioxidant activity. The comparative pharmacokinetic study of formulation and free BER was carried out in animals for estimation of bioavailability. The particle size recorded for the diluted sample using a Malvern Zetasizer was 240 ± 5.6 nm. The ζ-potential and the predicted % entrapment efficiency versus (vs) observed were +18 mV and 83.25 ± 2.3% vs 85 ± 3.5%. The high % drug release from the NPs was recorded. The analytical studies executed using infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction expressed safe combinations of the components in the formulation and physical state of the drug revealed to be amorphous in the formulation. Cytotoxicity testing demonstrated that the formulation effectively lowered the cell viability and IC50 of the tested cell line in comparison to a raw drug. The cellular uptake of BER-ALG/CHS-NPs-F was 5.5-fold higher than that of BER-suspension. The antioxidant capacities of BER-ALG/CHS-NPs-F vs BER-suspension by the DPPH assay were measured to be 62.3 ± 2.5% vs 30 ± 6%, indicating good radical scavenging power of folate-conjugated NPs. The developed formulation showed a 4.4-fold improved oral bioavailability compared to BER-suspension. The hemolytic assay intimated <2% destruction of erythrocytes by the developed formulation. The observed experimental characterization results such as cytotoxicity, cellular uptake, antioxidant activity, and improved absorption suggested the effectiveness of BER-ALG/CHS-NPs-F toward breast cancer.

Comparative Evaluation of Particle Size Reduction, Salt Formation, and Amorphous Formulation on the Biopharmaceutical Performance of a Weak Base Drug Candidate.

Various approaches have been developed to enhance the solubility or dissolution rate for the delivery of poorly water-soluble molecules. In this work, guided by an in silico solubility sensitivity analysis for oral absorption, a comparative assessment of the biopharmaceutical performance of a jet-milled free base, a tosylate salt, and a 50:50 (w/w) amorphous solid dispersion (ASD) with hydroxypropyl methylcellulose acetate succinate (HPMCAS) of a weak base drug candidate, GDC-3280, was conducted. Successful particle size reduction without amorphization or form change was confirmed for the jet-milled free base. The potential of solubility enhancement and desupersaturation risk were identified for tosylate salt and ASD formulation by measurements of tosylate salt solubility product constant (Ksp) and amorphous solubility of GDC-3280. In vitro dissolution testing demonstrated dissolution rate improvement for the jet-milled free base when compared with the unmilled free base and confirmed solubility enhancement followed by desupersaturation for GDC-3280 tosylate salt and ASD formulation. A crystallization inhibitor, hydroxypropyl methylcellulose (HPMC), was found to slow down the desupersaturation of tosylate salt solution, providing general insights for the development of pharmaceutical salts with disproportionation risks. Finally, a pharmacokinetic study in dogs showed that the in vivo exposure increased by 1.7- to 2-fold for the tosylate salt and ASD formulation compared with the jet-milled free base, consistent with the in silico solubility sensitivity analysis for the fraction of drug absorbed. Overall, this work provides insights into the evaluation of multiple formulation approaches for enhancing the biopharmaceutical performance of poorly water-soluble drugs.

Flavonoids as promising anticancer therapeutics: Contemporary research, nanoantioxidant potential, and future scope.

Flavonoids are natural polyphenolic compounds considered safe, pleiotropic, and readily available molecules. It is widely distributed in various food products such as fruits and vegetables and beverages such as green tea, wine, and coca-based products. Many studies have reported the anticancer potential of flavonoids against different types of cancers, including solid tumors. The chemopreventive effect of flavonoids is attributed to various mechanisms, including modulation of autophagy, induction of cell cycle arrest, apoptosis, and antioxidant defense. Despite of significant anticancer activity of flavonoids, their clinical translation is limited due to their poor biopharmaceutical attributes (such as low aqueous solubility, limited permeability across the biological membranes (intestinal and blood-brain barrier), and stability issue in biological systems). A nanoparticulate system is an approach that is widely utilized to improve the biopharmaceutical performance and therapeutic efficacy of phytopharmaceuticals. The present review discusses the significant anticancer potential of promising flavonoids in different cancers and the utilization of nanoparticulate systems to improve their nanoantioxidant activity further to enhance the anticancer activity of loaded promising flavonoids. Although, various plant-derived secondary metabolites including flavonoids have been recommended for treating cancer, further vigilant research is warranted to prove their translational values.

Recent Advances in Cell Membrane Coated-Nanoparticles as Drug Delivery Systems for Tackling Urological Diseases.

Recent studies have revealed the functional roles of cell membrane coated-nanoparticles (CMNPs) in tackling urological diseases, including cancers, inflammation, and acute kidney injury. Cells are a fundamental part of pathology to regulate nearly all urological diseases, and, therefore, naturally derived cell membranes inherit the functional role to enhance the biopharmaceutical performance of their encapsulated nanoparticles on drug delivery. In this review, methods for CMNP synthesis and surface engineering are summarized. The application of different types of CMNPs for tackling urological diseases is updated, including cancer cell membrane, stem cell membrane, immune cell membrane, erythrocytes cell membranes, and extracellular vesicles, and their potential for clinical use is discussed.

Fed intestinal solubility limits and distributions applied to the Developability classification system

For solid oral dosage forms drug solubility in intestinal fluid is an important parameter influencing product performance and bioavailability. Solubility along with permeability are the two parameters applied in the Biopharmaceutics and Developability Classification Systems (DCS) to assess a drug’s potential for oral administration. Intestinal solubility varies with the intestinal contents and the differences between the fasted and fed states are recognised to influence solubility and bioavailability. In this study a novel fed state simulated media system comprising of nine media has been utilised to measure the solubility of seven drugs (ibuprofen, mefenamic acid, furosemide, dipyridamole, griseofulvin, paracetamol and acyclovir) previously studied in the fasted state DCS. The results demonstrate that the fed nine media system provides a range of solubility values for each drug and solubility behaviour is consistent with published design of experiment studies conducted in either the fed or fasted state. Three drugs (griseofulvin, paracetamol and acyclovir) exhibit very narrow solubility distributions, a result that matches published behaviour in the fasted state, indicating that this property is not influenced by the concentration of simulated media components. The nine solubility values for each drug can be utilised to calculate a dose/solubility volume ratio to visualise the drug’s position on the DCS grid. Due to the derivation of the nine media compositions the range and catergorisation could be considered as bioequivalent and can be combined with the data from the original fed intestinal fluid analysis to provide a population based solubility distribution. This provides further information on the drugs solubility behaviour and could be applied to quality by design formulation approaches. Comparison of the fed results in this study with similar published fasted results highlight that some differences detected match in vivo behaviour in food effect studies. This indicates that a combination of the fed and fasted systems may be a useful in vitro biopharmaceutical performance tool. However, it should be noted that the fed media recipes in this study are based on a liquid meal (Ensure Plus) and this may not be representative of alternative fed states achieved through ingestion of a solid meal. Nevertheless, this novel approach provides greater in vitro detail with respect to possible in vivo biopharmaceutical performance, an improved ability to apply risk-based approaches and the potential to investigate solubility based food effects. The system is therefore worthy of further investigation but studies will be required to expand the number of drugs measured and link the in vitro measurements to in vivo results.

QbD Enabled Formulation Development of Nanoemulsion of Nimodipine for Improved Biopharmaceutical Performance

QbD Enabled Formulation Development of Nanoemulsion of Nimodipine for Improved Biopharmaceutical Performance

A Sojourn on Liposomal Delivery System: Recent Advances and Future Prospects.

Liposomes are unique novel drug delivery carriers that favor the effective transportation of pharmaceuticals. These vesicles acquire one or more phospholipid bilayer membranes, and an inner aqueous core can carry both aqueous and lipid drugs. While hydrophilic molecules can be confined in the aqueous core, hydrophobic molecules are injected into the bilayer membrane. Liposomes have many benefits as a drug delivery method, including biocompatibility, the capacity to carry large drug payloads, and a variety of physicochemical and biological parameters that can be altered to influence their biological characteristics. In addition, being a size of 10-100 nm range can have numerous additional benefits, including enhanced pharmacokinetics, clever escape from the reticuloendothelial system, greater in vivo stability, longer and site-specific administration, and increased internalization in tumor tissue (enhanced permeability and retention impact). The current review focuses on the structural composition of liposomes, formulation technologies, and suitable case studies for optimizing biopharmaceutical performance. Moreover, clinical trials and marketed formulations of liposomes have been also stated in the prior art.

How to engineer aerosol particle properties and biopharmaceutical performance of propellant inhalers

Given the environmental compulsion to reformulate pressurised metered dose inhalers (pMDI) using new propellants with lower global warming potential, this study investigated how non-volatile excipients can be used to engineer aerosol particle microphysics and drug release. The dynamics of change in particle size, wetting and physical state were measured for single particles (glycerol/ethanol/beclomethasone dipropionate; BDP) in the aerosol phase at different relative humidity (RH) using an electrodynamic balance. BDP dissolution rates were compared for aerosols from pMDI containing different ratios of BDP:glycerol or BDP:isopropyl myristate (IPM). In 45 % RH, ethanol loss was followed by evaporation of condensed water to generate spherical particles with solid inclusions or compact irregular-shaped solid particles, according to the presence or absence of glycerol. In RH > 95 %, condensed water did not evaporate and BDP formed solid inclusions in water/glycerol or water droplets. Varying the non-volatile component, 0–50 % w/w, in pMDI resulted in a concentration-dependent 4–8-fold reduction in BDP dissolution rate. These findings demonstrate that non-volatile excipients provide a means of engineering aerosol properties and, modifying the rate of drug release from aerosol medicines. We also demonstrated differences between particles formed in vitro in ambient humidity versus higher humidity, more like that encountered during oral inhalation.