Biomechanical Signals Research Articles

Fully Degradable, Highly Sensitive Pressure Sensor Based on Bipolar Electret for Biomechanical Signal Monitoring

Fully Degradable, Highly Sensitive Pressure Sensor Based on Bipolar Electret for Biomechanical Signal Monitoring

Keratoconus.

Keratoconus is a progressive eye disorder primarily affecting individuals in adolescence and early adulthood. The ectatic changes in the cornea cause thinning and cone-like steepening leading to irregular astigmatism and reduced vision. Keratoconus is a complex disorder with a multifaceted aetiology and pathogenesis, including genetic, environmental, biomechanical and cellular factors. Environmental factors, such as eye rubbing, UV light exposure and contact lens wearing, are associated with disease progression. On the cellular level, a complex interplay of hormonal changes, alterations in enzymatic activity that modify extracellular membrane stiffness, and changes in biochemical and biomechanical signalling pathways disrupt collagen cross-linking within the stroma, contributing to structural integrity loss and distortion of normal corneal anatomy. Clinically, keratoconus is diagnosed through clinical examination and corneal imaging. Advanced imaging platforms have improved the detection of keratoconus, facilitating early diagnosis and monitoring of disease progression. Treatment strategies for keratoconus are tailored to disease severity and progression. In early stages, vision correction with glasses or soft contact lenses may suffice. As the condition advances, rigid gas-permeable contact lenses or scleral lenses are prescribed. Corneal cross-linking has emerged as a pivotal treatment aimed at halting the progression of corneal ectasia. In patients with keratoconus with scarring or contact lens intolerance, surgical interventions are performed.

Soft wearable electronics for evaluation of biological tissue mechanics

Flexible wearable devices designed to evaluate the biomechanical properties of deep tissues not only facilitate continuous and effective monitoring in basic performance but also exhibit significant potential in broader disease assessments. Recent advancements are highlighted in the structural and principled design of platforms capable of capturing various biomechanical signals. These advancements have led to enhanced testing capabilities concerning spatial scales and resolution modes at different depths. This review discusses the engineering of soft wearable devices for the biomechanical evaluation of deep tissue signals. It encompasses different measurement modes, device design and fabrication methods, integrated circuit (IC) integration schemes, and the characteristics of measurement depth and accuracy. The core discussion focuses on platform development, targeting different monitoring sites and platform structure design, ranging from linear strain gauges and conformal stretchable sensors to complex three-dimensional (3D) circuit-integrated stretchable arrays. We further explore various technologies associated with different measurement mechanisms and engineering designs, as well as the penetration depth and spatial resolution of these wearable sensors. The practical applications of these technologies are evident in the monitoring of deep tissue signals and changes in tissue characteristics. The results suggest that wearable biomechanical sensing systems hold substantial promise for applications in healthcare and research.

Epigenetic regulation by polycomb repressive complex 1 promotes cerebral cavernous malformations.

Cerebral cavernous malformations (CCMs) are anomalies of the cerebral vasculature. Loss of the CCM proteins CCM1/KRIT1, CCM2, or CCM3/PDCD10 trigger a MAPK-Krüppel-like factor 2 (KLF2) signaling cascade, which induces a pathophysiological pattern of gene expression. The downstream target genes that are activated by KLF2 are mostly unknown. Here we show that Chromobox Protein Homolog 7 (CBX7), component of the Polycomb Repressive Complex 1, contributes to pathophysiological KLF2 signaling during zebrafish cardiovascular development. CBX7/cbx7a mRNA is strongly upregulated in lesions of CCM patients, and in human, mouse, and zebrafish CCM-deficient endothelial cells. The silencing or pharmacological inhibition of CBX7/Cbx7a suppresses pathological CCM phenotypes in ccm2 zebrafish, CCM2-deficient HUVECs, and in a pre-clinical murine CCM3 disease model. Whole-transcriptome datasets from zebrafish cardiovascular tissues and human endothelial cells reveal a role of CBX7/Cbx7a in the activation of KLF2 target genes including TEK, ANGPT1, WNT9, and endoMT-associated genes. Our findings uncover an intricate interplay in the regulation of Klf2-dependent biomechanical signaling by CBX7 in CCM. This work also provides insights for therapeutic strategies in the pathogenesis of CCM.

Scalable Layered Heterogeneous Hydrogel Fibers with Strain-Induced Crystallization for Tough, Resilient, and Highly Conductive Soft Bioelectronics.

The advancement of soft bioelectronics hinges critically on the electromechanical properties of hydrogels. Despite ongoing research into diverse material and structural strategies to enhance these properties, producing hydrogels that are simultaneously tough, resilient, and highly conductive for long-term, dynamic physiological monitoring remains a formidable challenge. Here, a strategy utilizing scalable layered heterogeneous hydrogel fibers (LHHFs) is introduced that enables synergistic electromechanical modulation of hydrogels. High toughness (1.4MJ m-3) and resilience (over 92% recovery from 200% strain) of LHHFs are achieved through a damage-free toughening mechanism that involves dense long-chain entanglements and reversible strain-induced crystallization of sodium polyacrylate. The unique symmetrical layered structure of LHHFs, featuring distinct electrical and mechanical functional layers, facilitates the mixing of multi-walled carbon nanotubes to significantly enhance electrical conductivity (192.7 S m-1) without compromising toughness and resilience. Furthermore, high-performance LHHF capacitive iontronic strain/pressure sensors and epidermal electrodes are developed, capable of accurately and stably capturing biomechanical and bioelectrical signals from the human body under long-term, dynamic conditions. The LHHF offers a promising route for developing hydrogels with uniquely integrated electromechanical attributes, advancing practical wearable healthcare applications.

Multifunctional Flexible Sensor with the Hybrid Staggered-Rib Conductive Network for Intelligent Recognition of Human Biomechanical and Electrophysiological Signals

Multifunctional Flexible Sensor with the Hybrid Staggered-Rib Conductive Network for Intelligent Recognition of Human Biomechanical and Electrophysiological Signals

Ultra-thin and sensitive pressure sensor based on MXene/PVDF-HFP composite fiber TENG for self-diagnosis of ligament injuries

Early screening of anterior cruciate ligament (ACL) injuries using wearable devices enables timely intervention and reduces the risk of chronic complications. However, the subtle biomechanical signals of the ACL pose challenges to the baseline stability, sensitivity and skin adherence of wearable devices. Here, we present a TENG based on MXene/PVDF-HFP composite fibers for ACL self-diagnosis, leveraging the inherent advantages of TENG in baseline stability. The fiber-network structure prepared by electrospinning ensures that the TENG is ultra-thin and flexible to wear. The addition of MXene significantly increases the relative permittivity of the electrode materials, and re-modulates the crystalline phase (α and β). Consequently, the peak-to-peak open circuit voltage of the TENG reaches 160 V under a pressure of 10 N. It can respond to pressures as low as 0.01 N, allowing it to distinguish subtle relative displacements between the tibia and the knee. Integrated with a mobile app, a self-diagnostic system capable of detecting varying degrees of ACL injury has been developed. We expect this approach to facilitate the early detection and timely treatment of ACL injuries.

Actomyosin forces in cell migration: Moving beyond cell body retraction.

In textbook illustrations of migrating cells, actomyosin contractility is typically depicted as the contraction force necessary for cell body retraction. This dogma has been transformed by the molecular clutch model, which acknowledges that actomyosin traction forces also generate and transmit biomechanical signals at the leading edge, enabling cells to sense and shape their migratory path in mechanically complex environments. To fulfill these complementary functions, the actomyosin system assembles a gradient of contractile energy along the front-rear axis of migratory cells. Here, we highlight the hierarchic assembly and self-regulatory network structure of the actomyosin system and explain how the kinetics of different nonmuscle myosin II (NM II) paralogs synergize during contractile force generation. Our aim is to emphasize how protrusion formation, cell adhesion, contraction, and retraction are spatiotemporally integrated during different modes of migration, including chemotaxis and durotaxis. Finally, we hypothesize how different NM II paralogs might tune aspects of migration in vivo, highlighting future research directions.

Congeneric and Robust Adhesive Epidermal Patch for Anti‐Interference Physiological Signal Recognition

AbstractEpidermal patches utilized for the transduction of biopotentials and biomechanical signals are pivotal in wearable health monitoring. However, the shortcomings, such as inferior conformal ability, deficient adhesion, and motion artifacts, severely impede the bioelectrodes from perceiving stable and superior‐quality physiological signals. Herein, a polymer epidermal patch possessing a spontaneous Janus structure is facilely prepared through itaconic acylhydrazine (IAH) induced gradient polymerization. The solubility discrepancy of the monomers in IAH authorized the Janus structure with distinct adhesion properties on each side. Moreover, the hydrogen bond network constructed by IAH confers the polymer with a high degree of skin compliance, enabling dynamic and stable mechanical properties to withstand complex monitoring environments. By integrating skin‐like softness (Young's modulus ≈0.16 MPa), robust adhesion (35 kPa), and high signal‐to‐noise ratio (32 dB), this epidermal patch displays exceptional elasticity within the physiological activity spectrum, provides swift electrical and mechanical self‐recovery capabilities, and resists interference in dynamic signal monitoring (deformation, compression, humidity, etc.). By demonstrating multifaceted applications for Electrocardiogram recording under diverse disturbances, the epidermal patch profiles a promising noninvasive, enduring wearable bioelectronic interface with immunity to interference.

IP3T: an interpretable multimodal time-series model for enhanced gait phase prediction in wearable exoskeletons.

Wearable exoskeletons assist individuals with mobility impairments, enhancing their gait and quality of life. This study presents the iP3T model, designed to optimize gait phase prediction through the fusion of multimodal time-series data. The iP3T model integrates data from stretch sensors, inertial measurement units (IMUs), and surface electromyography (sEMG) to capture comprehensive biomechanical and neuromuscular signals. The model's architecture leverages transformer-based attention mechanisms to prioritize crucial data points. A series of experiments were conducted on a treadmill with five participants to validate the model's performance. The iP3T model consistently outperformed traditional single-modality approaches. In the post-stance phase, the model achieved an RMSE of 1.073 and an R2 of 0.985. The integration of multimodal data enhanced prediction accuracy and reduced metabolic cost during assisted treadmill walking. The study highlights the critical role of each sensor type in providing a holistic understanding of the gait cycle. The attention mechanisms within the iP3T model contribute to its interpretability, allowing for effective optimization of sensor configurations and ultimately improving mobility and quality of life for individuals with gait impairments.

Heavy mechanical force decelerates orthodontic tooth movement via Piezo1-induced mitochondrial calcium down-regulation

Orthodontic tooth movement (OTM) depends on periodontal ligament cells (PDLCs), which sense biomechanical stimuli and initiate alveolar bone remodeling. Light (optimal) forces accelerate OTM, whereas heavy forces decelerate it. However, the mechanisms by which PDLCs sense biomechanical stimuli and affect osteoclastic activities under different mechanical forces (MFs) remain unclear. This study demonstrates that mechanosensitive ion channel Piezo1-mediated Ca2+ signal conversion is crucial for sensing and delivering biomechanical signals in PDLCs under heavy-force conditions. Heavy MF up-regulated Piezo1 in PDLCs, reducing mitochondrial Ca2+ influx by inhibiting ITPR3 expression in mitochondria-associated membranes. Decreased mitochondrial calcium uptake led to reduced cytoplasmic release of mitochondrial DNA and inhibited the activation of the cGAS‒STING signaling cascade, subsequently inhibiting monocyte-to-osteoclast differentiation. Inhibition of Piezo1 or up-regulation of STING expression under heavy MF conditions significantly increased osteoclast activity and accelerated OTM. These findings suggest that heavy MF-induced Piezo1 expression in PDLCs is closely related to the control of osteoclast activity during OTM and plays an essential role in alveolar bone remodeling. This mechanism may be a potential therapeutic target for accelerating OTM.

Hyaluronan and proteoglycan link protein 1 – A novel signaling molecule for rejuvenating aged skin

The skin seems to rejuvenate upon exposure to factors within the circulation of young organisms. Intrinsic factors that modulate skin aging are poorly understood. We used heterochronic parabiosis and aptamer-based proteomics to identify serum-derived rejuvenating factors. We discovered a novel extracellular function of hyaluronan and proteoglycan link protein 1 (HAPLN1). Its serum levels decreased with age, disturbing the integrity of the skin extracellular matrix, which is predominantly composed of collagen I and hyaluronan; levels of various markers, which decrease in aged skin, were significantly restored in vivo and in vitro by the administration of recombinant human HAPLN1 (rhHAPLN1). rhHAPLN1 protected transforming growth factor beta receptor 2 on the cell surface from endocytic degradation via mechanisms such as regulation of viscoelasticity, CD44 clustering. Moreover, rhHAPLN1 regulated the levels of nuclear factor erythroid 2–related factor 2, phosphorylated nuclear factor kappa B, and some cyclin-dependent kinase inhibitors such as p16 and p21. Therefore, rhHAPLN1 may act as a novel biomechanical signaling protein to rejuvenate aged skin.

3D-bioprinted gelatin methacryloyl hydrogel culture system emulating the oviduct environment for enhanced preimplantation embryo development

Oviducts have specific biomechanical properties that support fertilization and preimplantation embryo development, both of which are essential for successful pregnancy. However, conventional plastic-based human embryo culture does not recapitulate the biomechanical environment of the oviduct. Therefore, oviduct mimic culture systems that accurately emulate biophysical conditions for reproductive cells are a significant unmet clinical need. In the present study, we designed a three-dimensional (3D)-bioprinted optimal soft hydrogel system that accurately mimics the oviduct environment and investigated signaling factors during embryo development. We developed an oviduct tube-mimic hydrogel culture dish using gelatin methacryloyl (GelMA) 3D-bioprinted hydrogel. Quantitative assessment of hydrogel mechanical properties depended on the stiffness of the GelMA 3D-bioprinted hydrogel. Embryo quality was evaluated based on cleavage speed and blastocyst ratio on the GelMA hydrogel. Whole-transcriptome next-generation sequencing (NGS) analysis of embryos was used to identify biomechanical signaling factors. Our findings revealed that 10 kPa GelMA hydrogel culture conditions performed better with respect to development speed, blastocyst ratio, and hatching ratio than the control condition. Whole transcriptome NGS revealed up-regulation of mRNA processing genes and protein transport genes by the 7 and 10 kPa hydrogels. Furthermore, the inner cell mass and the number of Oct4+ cells were significantly higher in blastocysts cultured on 10 kPa hydrogel dishes than in those cultured on conventional hard plastic dishes. These findings demonstrate that optimized oviduct-mimic hydrogel-based 3D GelMA culture dishes could improve in vitro embryo development. Hence, 3D GelMA culture dishes may be useful as human embryo culture systems for assisted reproductive techniques.

RhoA/ROCK-TAZ Axis regulates bone formation within calvarial trans-sutural distraction osteogenesis

BackgroundCraniofacial skeletal deformities can be addressed by applying tensile force to sutures to prompt sutural bone formation. The intricate process of mechanical modulation in craniofacial sutures involves complex biomechanical signal transduction. The small GTPase Ras homolog gene family member A (RhoA) functions as a key mechanotransduction protein, orchestrating the dynamic assembly of the cytoskeleton by activating the Rho-associated coiled-coil containing protein kinase (ROCK). Transcriptional coactivator with PDZ-binding motif (TAZ) serves as a crucial mediator in the regulation of genes and the orchestration of biological functions within the mechanotransduction signaling pathway. However, the role of RhoA/ROCK-TAZ in trans-sutural distraction osteogenesis has not been reported. MethodsWe utilized pre-osteoblast-specific RhoA deletion mice to establish an in vivo calvarial trans-sutural distraction model and an in vitro mechanical stretch model for pre-osteoblasts isolated from neonatal mice. Micro-CT and histological staining were utilized to detect the formation of new bone in the sagittal suture of the skull as well as the activation of RhoA, Osterix and TAZ. The activation of ROCK-limk-cofilin and the nuclear translocation of TAZ in pre-osteoblasts under mechanical tension were detected through Western blot, qRT-PCR, and immunofluorescence. ResultsThe osteogenic differentiation of pre-osteoblasts was facilitated by mechanical tension through the activation of RhoA and Rho-associated kinase (ROCK), while ablation of RhoA impaired osteogenesis by inhibiting pre-osteoblast differentiation after suture expansion. Furthermore, inhibiting RhoA expression could block tensile-stimulated nuclear translocation of TAZ by preventing F-actin assembly through ROCK-LIM-domain kinase (LIMK)-cofilin pathway. In addition, the TAZ agonist TM-25659 could attenuate impaired osteogenesis caused by ablation of RhoA in pre-osteoblasts by increasing TAZ nuclear accumulation. ConclusionsThis study demonstrates that mechanical stretching promotes the osteogenic differentiation of pre-osteoblasts in trans-sutural distraction osteogenesis, and this process is mediated by the RhoA/ROCK-TAZ signaling axis. Overall, our results may provide an insight for potential treatment strategies for craniosynostosis patients through trans-sutural distraction osteogenesis.

A Fully Biodegradable and Ultra‐Sensitive Crack‐Based Strain Sensor for Biomechanical Signal Monitoring

AbstractA fully biodegradable, ultra‐sensitive, and soft strain sensor is pivotal for temporary, real‐time monitoring of microdeformations, crucial in disease diagnosis, surgical precision, and prognosis of muscular, and vascular conditions. Nevertheless, the strain sensitivity of previous biodegradable sensors, denoted by gauge factor (GF) up to ≈100, falls short of requirements for complex biomedical monitoring scenarios, specifically monitoring cardio‐cerebrovascular diseases with microscale variations in vascular surface strain. Here, a fully biodegradable, ultra‐sensitive crack‐based flexible strain sensor is introduced achieving GF of 1355 at 1.5% strain through integration of molybdenum (Mo) film, molybdenum trioxide (MoO3) adhesion layer, and polycaprolactone (PCL) substrate. Analysis of crack morphology of biodegradable thin‐film metals, including Mo, tungsten (W), and magnesium (Mg), reveals material‐dependent sensitivity and repeatability of crack‐based strain sensors. The effect of the adhesion layer and polymer substrate is also investigated. Overall morphological studies on the sensor present a comprehensive understanding of metal film cracking behavior and corresponding performance characterization, showing significant potential for highly sensitive sensors. A hybrid membrane composed of candelilla wax (Cw), beeswax (Bw), and polybutylene adipate‐co‐terephthalate (PBAT) is introduced to provide hydrophobic, yet flexible encapsulation. In vivo, short‐term (≈3 days) monitoring of vascular pulsatility underscores the potential of the sensing tool for rapid, accurate, and temporal disease diagnosis and treatment.

A human pluripotent stem cell-based somitogenesis model using microfluidics

Emerging human pluripotent stem cell (hPSC)-based embryo models are useful for studying human embryogenesis. Particularly, there are hPSC-based somitogenesis models using free-floating culture that recapitulate somite formation. Somitogenesis invivo involves intricately orchestrated biochemical and biomechanical events. However, none of the current somitogenesis models controls biochemical gradients or biomechanical signals in the culture, limiting their applicability to untangle complex biochemical-biomechanical interactions that drive somitogenesis. Herein, we develop a human somitogenesis model by confining hPSC-derived presomitic mesoderm (PSM) tissues in microfabricated trenches. Exogenous microfluidic morphogen gradients imposed on the PSM tissues cause axial patterning and trigger spontaneous rostral-to-caudal somite formation. A mechanical theory is developed to explain the size dependency between somites and the PSM. The microfluidic somitogenesis model is further exploited to reveal regulatory roles of cellular and tissue biomechanics in somite formation. This study presents a useful microengineered, hPSC-based model for understanding the biochemical and biomechanical events that guide somite formation.

Osteogenic differentiation by MC3T3-E1 pre-osteoblasts is enhanced more on wet-chemically surface-modified 3D-printed poly-e-caprolactone scaffolds than on plasma-assisted modified scaffolds

3D-Printed poly-є-caprolactone (PCL)-scaffolds are safe for cell support, but their hydrophobicity, bioinertness, and smooth surface limits bioactive/biomimetic performance. This can be overcome by providing biophysicochemical and biomechanical signals using amine (NH2) or carboxyl (COOH)-surface functionalization via wet-chemical treatment or plasma-assisted modification, but the alteration extent and hence bone-cell activity is unknown. We aimed to investigate the influence of NH2 or COOH-surface functionalization via wet-chemical treatment or plasma-assisted modification on biophysicochemical and biomechanical properties of 3D-printed PCL-scaffolds and osteogenic activity. In PCL/NH2 and PCL/COOH scaffolds, only wet-chemical treatment increased void size and surface-roughness, but both treatments reduced water contact angle. Wet-chemical treatment decreased, but plasma-assisted modification increased the elastic modulus. Finite-element modeling revealed that in all scaffolds, maximum von Mises stress under 2% compression-strain did not surpass yield stress for bulk material, indicating excellent mechanical stability and fracture resistance. Wet-chemical treatment and plasma-assisted modification increased pre-osteoblast proliferation, alkaline phosphatase activity, and mineral deposition. Wet-chemical treatment increased Fgf2 mRNA, while both treatments increased Cox2 mRNA. Only wet-chemical treatment increased collagen production. In conclusion, NH2 and COOH-surface functionalization of 3D-printed PCL-scaffolds via wet-chemical treatment was superior to plasma-assisted modification in enhancing osteogenic activity, and is therefore more promising for in vivo bone formation.

Metabolomic Profiling and Characterization of a Novel 3D Culture System for Studying Chondrocyte Mechanotransduction.

Articular chondrocytes synthesize and maintain the avascular and aneural articular cartilage. In vivo these cells are surrounded by a 3D pericellular matrix (PCM) containing predominantly collagen VI. The PCM protects chondrocytes and facilitates mechanotransduction, and PCM stiffness is critical in transmitting biomechanical signals to chondrocytes. Various culture systems with different hydrogels have been used to encapsulate chondrocytes for 3D culture, but many lack either the PCM or the in vivo stiffness of the cartilage matrix. Here, we demonstrate that primary chondrocytes cultured in alginate will form a pericellular matrix and display a phenotype similar to in vivo conditions. We found that primary human and bovine chondrocytes, when cultured in alginate beads with addition of sodium L-ascorbate for 7 days, had a pronounced PCM, retained their phenotype, and synthesized both collagens VI and II. This novel culture system enables alginate-encapsulated chondrocytes to develop a robust PCM thereby creating a model system to study mechanotransduction. We also observed distinct compression-induced changes in metabolomic profiles between the monolayer-agarose and alginate-released agarose-embedded chondrocytes indicating physiological changes in cell metabolism. Our data suggest that 3D preculture of chondrocytes in alginate before encapsulation in physiologically-stiff agarose leads to a pronounced development of pericellular matrix that is sustained in the presence of ascorbate. This novel model can be useful in studying the mechanism by which chondrocytes respond to cyclical compression and other types of loading simulating in vivo physiological conditions.

Stretchable Unsymmetrical Piezoelectric BiO2-x Deposited-Hydrogel as Multimodal Triboelectric Nanogenerators for Biomechanical Motion Harvesting.

Enhancing the output performance of triboelectric nanogenerators (TENGs) is essential for increasing their application in smart devices. Oxygen-vacancy-rich BiO2-x nanosheets (BiO2-x NSs) are advanced-engineered nanomaterials with excellent piezoelectric properties. Herein, a stretchable unsymmetrical BiO2-x NSs deposited-hydrogel made of polyacrylamide (PAM) as a multimodal TENG is rationally fabricated, and the performance of TENG can be tailored by controlling the BiO2-x NSs deposition amount and spatial distribution. The alteration of resistance caused by the Poisson effect of PAM/BiO2-x composite hydrogel (H-BiO2-x) can be used as a piezoresistive sensor, and the piezoelectricity of BiO2-x NSs can effectively enhance the density of transfer charge, thus improving the output performance of the H-BiO2-x-based TENG. In addition, the chemical cross-linking between the BiO2-x NSs and the PAM polymer chain allows the hydrogel electrode to have a higher tensile capacity (867%). Used for biomechanical motion signal detection, the sensors made of H-BiO2-x have high sensitivity (gauge factor = 6.93) and can discriminate a range of forces (0.1-5.0 N) at low frequencies (0.5-2.0Hz). Finally, the prepared TENG can collect biological energy and convert it into electricity. Consequently, the improved TENG shows a good application prospect as multimodal biomechanical sensors by combining piezoresistive, piezoelectric, and triboelectric effects.

A finite element analysis of periodontal ligament fluid mechanics response to occlusal loading based on hydro-mechanical coupling model

ObjectiveConsidering fluid stimulation is one of the essential biomechanical signals for periodontal tissues, this study aims to characterizing fluid mechanics response during occlusal loading by a hydro-mechanical coupling model for periodontal ligament. DesignModels simulating periodontium with normal bone height and with intraosseous defects were built with three mechanical modules: tooth, periodontal ligament and alveolar bone. Tooth was modeled as linear elastic, and periodontal ligament and alveolar bone as a hydro-mechanical coupling model. Transient analyses under dynamic occlusal loading were performed. Fluid dynamics within periodontal ligament space was simulated and visualized by post-processing module. ResultsReciprocating oscillatory flow occurred within the periodontal ligament under occlusal loading. Higher pore pressure and fluid velocity were observed in furcation and apical regions compared to mid-root and cervical regions. Intraosseous defects increased pore pressure and fluid velocity within the periodontal ligament, most significantly near the defect. ConclusionBased on the results of the hydro-mechanical coupling model, significant oscillatory fluid motion is observed within the periodontal ligament under occlusal loading. Particularly, higher fluid velocity is evident in the furcation and apical areas. Additionally, Intraosseous defects significantly enhance fluid motion within the periodontal ligament.