Biohybrid Constructs Research Articles

Advances in melt electrowriting for cardiovascular applications.

Melt electrowriting (MEW) is an electric-field-assisted additive biofabrication technique that has brought significant advancements to bioinspired scaffold design for soft tissue engineering and beyond. Owing to its targeted microfiber placement, MEW has become a powerful platform technology for the fabrication of in vitro disease models up to functional biohybrid constructs that are investigated in vivo to reach clinical translation soon. This work provides a concise overview of this rapidly evolving field by highlighting the key contributions of MEW to cardiovascular tissue engineering. Specifically, we i) pinpoint the methods to introduce microvascular networks in thick 3D constructs benefitting from (sacrificial) MEW microfibers, ii) report MEW-based concepts for small-diameter vascular grafts and stents, iii) showcase how contracting cardiac tissues can profit from the tunable structure-property relationship of MEW scaffolds, and iv) address how complete regenerative heart valves can be built on complex fiber scaffold architectures that recapitulate J-shaped tensile properties and tissue heterogeneity. Lastly, we touch on novel biomaterial advancements and discuss the technological challenges of MEW to unlock the full potential of this transformative technology.

Enhancing Adhesion of Fibrin-Based Hydrogel to Polythioether Polymer Surfaces.

The development of stable (bio)hybrid constructs composed of scaffolds and (bio)matrices is a major challenge in the field of tissue engineering. In the present work, the adhesion of fibrin-based hydrogels to the surface of polythioether-based polymers relevant to the 3D printing of polymer scaffolds produced by thiol-ene click chemistry was investigated. Adhesion properties were characterized by single-lap tensile shear testing. Both the sample preparation and the test method were optimized for the analysis of fibrin gel bonding to the polythioether surface. Our experimental results show that even without further modification, an adhesion between the fibrin hydrogel and polythioether is substantial, with an adhesion strength of 4.9 ± 1.0 kPa. To further improve the bonding, linear functional poly(N-vinylpyrrolidone-co-glycidyl methacrylate) (PVP-co-GMA) copolymers were used that are known for covalently binding to fibrin. The maximum adhesion strength in our study was found to be 18.4 ± 3.4 kPa. The pure PVP-co-GMA copolymers also demonstrate covalent binding to the thiol-ene-based polymers with a maximum adhesion strength of 32.2 ± 2.7 kPa. Therefore, compared to pure fibrin, the presence of copolymer coating both on the polythioether surface and in the fibrin gel led to a significant increase of the adhesion strength by a factor of 1.6.

Combination of melt-electrospun poly-ε-caprolactone scaffolds and hepatocyte-like cells from footprint-free hiPSCs to create 3D biohybrid constructs for liver tissue engineering

The liver is a vital organ with numerous functions, including metabolic functions, detoxification, and the synthesis of secretory proteins. The increasing prevalence of liver diseases requires the development of effective treatments, models, and regenerative approaches. The field of liver tissue engineering represents a significant advance in overcoming these challenges. In this study, 3D biohybrid constructs were created by combining hepatocyte-like cells (HLCs) derived from patient-specific footprint-free human induced pluripotent stem cells (hiPSCs) and 3D melt-electrospun poly-ε-caprolactone (PCL) scaffolds. First, a differentiation procedure was established to obtain autologous HCLs from hiPSCs reprogrammed from renal epithelial cells using self-replicating mRNA. The obtained cells expressed hepatocyte-specific markers and exhibited important hepatocyte functions, such as albumin synthesis, cytochrome P450 activity, glycogen storage, and indocyanine green metabolism. Biocompatible PCL scaffolds were fabricated by melt-electrospinning and seeded with pre-differentiated hepatoblasts, which uniformly attached to the fibers of the scaffolds and successfully matured into HLCs. The use of patient-specific, footprint-free hiPSC-derived HLCs represents a promising cell source for personalized liver regeneration strategies. In combination with biocompatible 3D scaffolds, this innovative approach has a broader range of applications spanning liver tissue engineering, drug testing and discovery, and disease modeling.

Lifelike Transformative Materials for Biohybrid Implants: Inspired by Nature, Driven by Technology.

Today's living world is enriched with a myriad of natural biological designs, shaped by billions of years of evolution. Unraveling the construction rules of living organisms offers the potential to create new materials and systems for biomedicine. From the close examination of living organisms, several concepts emerge: hierarchy, pattern repetition, adaptation, and irreducible complexity. All these aspects must be tackled to develop transformative materials with lifelike behavior. This perspective article highlights recent progress in the development of transformative biohybrid systems for applications in the fields of tissue regeneration and biomedicine. Advances in computational simulations and data-driven predictions are also discussed. These tools enable the virtual high-throughput screening of implant design and performance before committing to fabrication, thus reducing the development time and cost of biomimetic and biohybrid constructs. The ongoing progress of imaging methods also constitutes an essential part of this matter in order to validate the computation models and enable longitudinal monitoring. Finally, the current challenges of lifelike biohybrid materials, including reproducibility, ethical considerations, and translation, are discussed. Advances in the development of lifelike materials will open new biomedical horizons, where perhaps what is currently envisioned as science fiction will become a science-driven reality in the future.

Co-microencapsulation of human umbilical cord-derived mesenchymal stem and pancreatic islet-derived insulin producing cells in experimental type 1 diabetes.

Post-partum umbilical cord Wharton Jelly-derived adult mesenchymal stem cells (hUCMS) hold anti-inflammatory and immunosuppressive properties. Human pancreatic islet-derived progenitor cells (hIDC) may de-differentiate, and subsequently re-differentiate into insulin producing cells. The two cell types share common molecules that facilitate their synergistic interaction and possibly crosstalk, likely useful for the cell therapy of type 1 diabetes (T1D). Upon microencapsulation in sodium alginate (AG), hUCMS and hIDC were able to form cell co-aggregates that looked well integrated and viable. We then grafted microencapsulated hUCMS/hIDC co-aggregates into non-obese diabetic/severe combined immunodeficient (NOD/SCID) mice, and observed an acquired ability of cells to produce and store hormones. Finally, we transplanted these biohybrid constructs into NOD mice with recent onset, spontaneous overt diabetes, observing a decline of blood glucose levels. In vitro, we have shown that hUCMS inhibited proliferation of allogeneic polymorphonuclear blood cells from patients with T1D, while promoting expansion of FoxP3+ Tregs. Reversal of hyperglycemia in diabetic NODs seems to suggest that hUCMS and hIDC, upon co-microencapsulation, anatomically and functionally synergized to accomplish two goals: maintain tracer insulin output by hIDC, while exploting the immunoregulatory properties of hUCMS. We have gathered preliminary evidence that the two adult stem cell types within AG microcapsules, may synergistically promote tracer insulin production, while "freezing" the autoimmune disease process, and help reversal of the recent onset hyperglycemia in a spontaneous, autoimmune rodent model of diabetes, the NOD mouse, with no need for pharmacologic immunosuppression.

Bioengineering Organs for Blood Detoxification

For patients with severe kidney or liver failure the best solution is currently organ transplantation. However, not all patients are eligible for transplantation and due to limited organ availability, most patients are currently treated with therapies using artificial kidney and artificial liver devices. These therapies, despite their relative success in preserving the patients' life, have important limitations since they can only replace part of the natural kidney or liver functions. As blood detoxification (and other functions) in these highly perfused organs is achieved by specialized cells, it seems relevant to review the approaches leading to bioengineered organs fulfilling most of the native organ functions. There, the culture of cells of specific phenotypes on adapted scaffolds that can be perfused takes place. In this review paper, first the functions of kidney and liver organs are briefly described. Then artificial kidney/liver devices, bioartificial kidney devices, and bioartificial liver devices are focused on, as well as biohybrid constructs obtained by decellularization and recellularization of animal organs. For all organs, a thorough overview of the literature is given and the perspectives for their application in the clinic are discussed.

Biomaterials in Tendon and Skeletal Muscle Tissue Engineering: Current Trends and Challenges.

Tissue engineering is a promising approach to repair tendon and muscle when natural healing fails. Biohybrid constructs obtained after cells’ seeding and culture in dedicated scaffolds have indeed been considered as relevant tools for mimicking native tissue, leading to a better integration in vivo. They can also be employed to perform advanced in vitro studies to model the cell differentiation or regeneration processes. In this review, we report and analyze the different solutions proposed in literature, for the reconstruction of tendon, muscle, and the myotendinous junction. They classically rely on the three pillars of tissue engineering, i.e., cells, biomaterials and environment (both chemical and physical stimuli). We have chosen to present biomimetic or bioinspired strategies based on understanding of the native tissue structure/functions/properties of the tissue of interest. For each tissue, we sorted the relevant publications according to an increasing degree of complexity in the materials’ shape or manufacture. We present their biological and mechanical performances, observed in vitro and in vivo when available. Although there is no consensus for a gold standard technique to reconstruct these musculo-skeletal tissues, the reader can find different ways to progress in the field and to understand the recent history in the choice of materials, from collagen to polymer-based matrices.

The Role of Shewanella Oneidensis MR-1 Structural Proteins in Electrochemical Performance and Biofilm Development

Microbial exoelectrogens present promising avenues for the development of bioremediation, biofuel cells and synthetic biology. Our research interests are focused on achieving efficient electron transfer from these organisms embedded in biohybrid constructs while reducing ohmic loses in the system. A crucial aspect for attaining this goal is to fully understand bacterial motility and attachment to the solid support of interest in which respiration occurs. Therefore, biofilm formation is of central interest in anode respiring microorganisms relying on extracellular electron transfer (EET). Microbial appendages have been proposed to be involved in cell attachment as well as in different modes of cell motility prior to the biofilm formation process as observed in select microorganisms [1]. Amongst them, Shewanella oneidensis has been thoroughly used as a model for further understanding microbial electrochemical phenomena. A crucial area of study contributing to the development of microbial electrochemical systems consists in identifying key components involved in the assembly and functionality of pili and flagella in this organism. Therefore, in this study we utilized motility mutants of S. oneidensis MR-1 that lack key proteins involved in the secretion of type IV pili and flagella. Electrochemical techniques were explored to compare the performance and current generation from microbial fuel cells containing motility-impaired mutants as well as wild type S. oneidensis. Furthermore, we studied and quantified the anodic biofilm morphological characteristics based on microscopic techniques. We found that type IV pili mutants exhibited the highest deficiencies in electrochemical performance and current production based on chronoamperometric studies. Specifically, these deficiencies were more pronounced on PilD and PilT protein-lacking mutants. These complexes are essential inner membrane proteins responsible for pili assembly and contraction [2]. On the other hand, flagella-lacking S. oneidensis mutants did not present significant restrains in current output and biofilm formation. We conclude that the discussed structural protein assemblies present relevant roles in bacterial surface attachment. Our findings present direct implications in the development of fully engineered biohybrid assemblies, bacteria-anode interactions, and bacterial electron transfer quantification. Figure 1. SEM images of wild type, pili-lacking and flagella-lacking mutants of S. oneidensisattachedto carbon felt fibers.

Myelination and node of Ranvier formation on sensory neurons in a defined in vitro system

One of the most important developmental modifications of the nervous system is Schwann cell myelination of axons. Schwann cells ensheath axons to create myelin segments to provide protection to the axon as well as increase the conduction of action potentials. In vitro neuronal systems provide a unique modality to study a variety of factors influencing myelination as well as diseases associated with myelin sheath degradation. This work details the development of a patterned in vitro myelinating dorsal root ganglion culture. This defined system utilized a serum-free medium in combination with a patterned substrate, utilizing the cytophobic and cytophilic molecules (poly)ethylene glycol (PEG) and N-1[3 (trimethoxysilyl) propyl] diethylenetriamine (DETA), respectively. Directional outgrowth of the neurites and subsequent myelination was controlled by surface modifications, and conformity to the pattern was measured over the duration of the experiments. The myelinated segments and nodal proteins were visualized and quantified using confocal microscopy. This tissue-engineered system provides a highly controlled, reproducible model for studying Schwann cell interactions with sensory neurons, as well as the myelination process, and its effect on neuronal plasticity and peripheral nerve regeneration. It is also compatible for use in bio-hybrid constructs to reproduce the stretch reflex arc on a chip because the media combination used is the same that we have used previously for motoneurons, muscle, and for neuromuscular junction (NMJ) formation. This work could have application for the study of demyelinating diseases such as diabetes induced peripheral neuropathy and could rapidly translate to a role in the discovery of drugs promoting enhanced peripheral nervous system (PNS) remyelination.

Non-linear modeling of active biohybrid materials

Recent advances in engineered muscle tissue attached to a synthetic substrate motivate the development of appropriate constitutive and numerical models. Applications of active materials can be expanded by using robust, non-mammalian muscle cells, such as those of Manduca sexta. In this study, we propose a model to assist in the analysis of biohybrid constructs by generalizing a recently proposed constitutive law for Manduca muscle tissue. The continuum model accounts (i) for the stimulation of muscle fibers by introducing multiple stress-free reference configurations for the active and passive states and (ii) for the hysteretic response by specifying a pseudo-elastic energy function. A simple example representing uniaxial loading–unloading is used to validate and verify the characteristics of the model. Then, based on experimental data of muscular thin films, a more complex case shows the qualitative potential of Manduca muscle tissue in active biohybrid constructs.

Bio/non-bio interfaces: A straightforward method for obtaining long term PDMS/muscle cell biohybrid constructs

Stable surface modifications of polydimethylsiloxane (PDMS) are of crucial importance for the exploitation of the versatile physical properties of silicone in many biological applications. Surface hydrophobic recovery in fact poses severe time limitations to the observation of biological events and, in particular, to cell culturing. A novel method of stable modification of PDMS surface chemistry was therefore elaborated, relying on the use of genipin as a natural low-toxicity cross-linker, and involving free amine moieties. Its effectiveness to long-term cultures was studied by preparation of thin PDMS films with different stiffness. After assessment of surface chemistry and substrate stiffness, H9c2 muscle cells were cultured on the modified films, and differentiating myoblasts were observed for a period of four weeks since differentiation induction. A lower PDMS stiffness increased myotube width and supported a higher actin and myosin colocalization within myotubes, suggesting the achievement of myotube functional maturity. These results provide evidence of the effectiveness of the proposed procedures to PDMS surface chemistry modification. Furthermore, modified PDMS membranes prove to be suitable to several long-term studies of cell behaviour in vitro, including muscle cell contractility investigations.

Modeling of cardiac muscle thin films: Pre-stretch, passive and active behavior

Recent progress in tissue engineering has made it possible to build contractile bio-hybrid materials that undergo conformational changes by growing a layer of cardiac muscle on elastic polymeric membranes. Further development of such muscular thin films for building actuators and powering devices requires exploring several design parameters, which include the alignment of the cardiac myocytes and the thickness/Young's modulus of elastomeric film. To more efficiently explore these design parameters, we propose a 3-D phenomenological constitutive model, which accounts for both the passive deformation including pre-stretch and the active behavior of the cardiomyocytes. The proposed 3-D constitutive model is implemented within a finite element framework, and can be used to improve the current design of bio-hybrid thin films and help developing bio-hybrid constructs capable of complex conformational changes.

Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies

Regenerative medicine seeks to repair or replace dysfunctional tissues with engineered biological or biohybrid systems. Current clinical regenerative models utilize simple uniform tissue constructs formed with cells cultured onto biocompatible scaffolds. Future regenerative therapies will require the fabrication of complex three-dimensional constructs containing multiple cell types and extracellular matrices. We believe bioprinting technologies will provide a key role in the design and construction of future engineered tissues for cell-based and regenerative therapies. This review describes the current state-of-the-art bioprinting technologies, focusing on direct-write bioprinting. We describe a number of process and device considerations for successful bioprinting of composite biohybrid constructs. In addition, we have provided baseline direct-write printing parameters for a hydrogel system (Pluronic F127) often used in cardiovascular applications. Direct-write dispensed lines (gels with viscosities ranging from 30 mPa s to greater than 600 × 10⁶ mPa s) were measured following mechanical and pneumatic printing via three commercially available needle sizes (20 ga, 25 ga, and 30 ga). Example patterns containing microvascular cells and isolated microvessel fragments were also bioprinted into composite 3D structures. Cells and vessel fragments remained viable and maintained in vitro behavior after incorporation into biohybrid structures. Direct-write bioprinting of biologicals provides a unique method to design and fabricate complex, multicomponent 3D structures for experimental use. We hope our design insights and baseline parameter descriptions of direct-write bioprinting will provide a useful foundation for colleagues to incorporate this 3D fabrication method into future regenerative therapies.

Ensembles of engineered cardiac tissues for physiological and pharmacological study: heart on a chip.

Traditionally, muscle physiology experiments require multiple tissue samples to obtain morphometric, electrophysiological, and contractility data. Furthermore, these experiments are commonly completed one at a time on cover slips of single cells, isotropic monolayers, or in isolated muscle strips. In all of these cases, variability of the samples hinders quantitative comparisons among experimental groups. Here, we report the design of a "heart on a chip" that exploits muscular thin film technology--biohybrid constructs of an engineered, anisotropic ventricular myocardium on an elastomeric thin film--to measure contractility, combined with a quantification of action potential propagation, and cytoskeletal architecture in multiple tissues in the same experiment. We report techniques for real-time data collection and analysis during pharmacological intervention. The chip is an efficient means of measuring structure-function relationships in constructs that replicate the hierarchical tissue architectures of laminar cardiac muscle.

Structural and rheological characterization of hyaluronic acid-based scaffolds for adipose tissue engineering

In this study the attention has been focused on the ester derivative of hyaluronic acid (HA), HYAFF ®11, as a potential three-dimensional scaffold in adipose tissue engineering. Different HYAFF ®11 sponges having different pore sizes, coated or not coated with HA, have been studied from a rheological and morphological point of view in order to correlate their structure to the macroscopic and degradation properties both in vitro and in vivo, using rat model. The in vitro results indicate that the HYAFF ®11 sponges possess proper structural and mechanical properties to be used as scaffolds for adipose tissue engineering and, among all the analysed samples, uncoated HYAFF ®11 large-pore sponges showed a longer lasting mechanical stability. From the in vivo results, it was observed that the elastic modulus of scaffolds seeded with preadipocytes, the biohybrid constructs, and explanted after 3 months of implantation in autologous rat model are over one order of magnitude higher than the corresponding values for the native tissue. These results could suggest that the implanted scaffolds can be invaded and populated by different cells, not only adipocytes, that can produce new matrix having different properties from that of adipose tissue.

Time and Space Evolution of Transport Properties in Agarose–Chondrocyte Constructs

During the development of de novo synthesized cartilage tissue engineered constructs, transport and biophysical properties are expected to change in time and space. Monitoring and control of the evolution of these parameters are of crucial importance to process biohybrid constructs in vitro. The aim of this work was to measure fluid and macromolecular transport and evolution of mechanical properties of tissue-engineered cartilage constructs as a function of culture time and extracellular matrix (ECM) production. It was found, in agreement with other literature reports, that mechanical and fluid transport properties of the constructs correlated well with time of culture and glycosaminoglycan (GAG) content. Further, diffusion coefficients of 2 probes, dextran (500 kDa) and bovine serum albumin (BSA), correlated well with GAG production. Diffusion coefficients (D) were measured with high spatial and temporal resolution by fluorescent recovery after photobleaching (FRAP). Diffusivity steadily decreases with time while it does not vary through the thickness of the specimen. On the basis of these results, an empirical relationship between diffusion coefficient and GAG content was proposed for the 2 probes analyzed. The results of this study provide useful information to optimize and control the tissue culture process in vitro.