Method For Biofunctionalization Research Articles

Biofunctionalization-optimized MoS2-based FET biosensors for the detection of Tau protein

Field effect transistor (FET)-based biosensors can accurately quantify changes in weak signals and show excellent performance advantages in the detection of trace biological disease markers. Biological functionalization (biofunctionalization) is an important factor in the fabrication of FET-based biosensors, which directly affects the performance of the biosensor. However, little attention from researchers has been paid to biofunctionalization, which results in uneven performance of biosensors. Herein, MoS2-based FET biosensors are designed and fabricated using four different biofunctionalization methods. The most suitable biofunctionalization method is obtained by comparing the sensing performances of different functionalized MoS2-based FET biosensors. Moreover, the working mechanism of the optimized biofunctionalization method is explored. Besides, the biofunctionalization-optimized MoS2-based FET biosensor exhibits excellent sensing performance, achieving sensitive detection of Tau protein in the concentration range of 10−2–103 pg/mL. This study provides a universal and effective strategy for the biofunctionalization optimization of two-dimensional materials-based FET biosensors.

Aqueous Graphene Dispersion and Biofunctionalization via Enzymatic Oxidation of Tripeptides.

Graphene, a 2D carbon material, possesses extraordinary mechanical, electrical, and thermal properties, making it highly attractive for various biological applications such as biosensing, biotherapeutics, and tissue engineering. However, the tendency of graphene sheets to aggregate and restack hinders its dispersion in water, limiting these applications. Peptides, with their defined amino acid sequences and versatile functionalities, are compelling molecules with which to modify graphene-aromatic amino acids can strengthen interactions through π-stacking and charged groups can be chosen to make the sheets dispersible and stable in water. Here, a facile and green method for covalently functionalizing and dispersing graphene using amphiphilic tripeptides, facilitated by a tyrosine phenol side chain, through an aqueous enzymatic oxidation process is demonstrated. The presence of a second aromatic side chain group enhances this interaction through non-covalent support via π-π stacking with the graphene surface. Futhermore, the addition of charged moieties originating from either ionizable amino acids or terminal groups facilitates profound interactions with water, resulting in the dispersion of the newly functionalized graphene in aqueous solutions. This biofunctionalization method resulted in ≈56% peptide loading on the graphene surface, leading to graphene dispersions that remain stable for months in aqueous solutions outperforming currently used surfactants.

Impact of surface biofunctionalization strategies on key effector cells response in polyacrylamide hydrogels for bone regeneration

Despite the clinical prevalence of various bone defect repair materials, a full understanding of their influence on bone repair and regeneration remains elusive. This study focuses on poly(acrylamide) (PAAm) hydrogels, popular 2D model substrates, which have regulable mechanical properties within physiological. However, their bio-inert nature requires surface biofunctionalization to enhance cell-material interactions and facilitate the study of bone repair mechanisms. We utilized PAAm hydrogels of varying stiffness (18, 76 and 295 kPa), employed sulfosuccinimidyl-6-(4′-azido-2′-nitropheny-lamino) hexanoate (sulfo-SANPAH) and N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride/N-hydroxysuccinimidyl acrylate (EDC/NHS) as crosslinkers, and cultured macrophages, endothelial cells, and bone mesenchymal stem cells on these hydrogels. Our findings indicated that sulfo-SANPAH's crosslinking efficiency surpassed that of EDC/NHS, irrespective of pore size and stiffness. Importantly, we observed that the stiffness and surface biofunctionalization method of hydrogels significantly impacted cell adhesion and proliferation. The collagen-modified hydrogels by EDC/NHS strategy failed to support the normal biological behavior of bone mesenchymal stem cells and hindered endothelial cell spreading. In contrast, these modified hydrogels by the sulfo-SANPAH method showed good cytocompatibility with the three types of cells. This study underscores the critical role of appropriate conjugation strategies for PAAm hydrogels, providing valuable insights for hydrogel surface modification in bone repair and regeneration research.

SpyDirect: A Novel Biofunctionalization Method for High Stability and Longevity of Electronic Biosensors.

Electronic immunosensors are indispensable tools for diagnostics, particularly in scenarios demanding immediate results. Conventionally, these sensors rely on the chemical immobilization of antibodies onto electrodes. However, globular proteins tend to adsorb and unfold on these surfaces. Therefore, self-assembled monolayers (SAMs) of thiolated alkyl molecules are commonly used for indirect gold-antibody coupling. Here, a limitation associated with SAMs is revealed, wherein they curtail the longevity of protein sensors, particularly when integrated into the state-of-the-art transducer of organic bioelectronics-the organic electrochemical transistor. The SpyDirect method is introduced, generating an ultrahigh-density array of oriented nanobody receptors stably linked to the gold electrode without any SAMs. It is accomplished by directly coupling cysteine-terminated and orientation-optimized spyTag peptides, onto which nanobody-spyCatcher fusion proteins are autocatalytically attached, yielding a dense and uniform biorecognition layer. The structure-guided design optimizes the conformation and packing of flexibly tethered nanobodies. This biolayer enhances shelf-life and reduces background noise in various complex media. SpyDirect functionalization is faster and easier than SAM-based methods and does not necessitate organic solvents, rendering the sensors eco-friendly, accessible, and amenable to scalability. SpyDirect represents a broadly applicable biofunctionalization method for enhancing the cost-effectiveness, sustainability, and longevity of electronic biosensors, all without compromising sensitivity.

Electrochemical Immunosensors Developed for Amyloid-Beta and Tau Proteins, Leading Biomarkers of Alzheimer's Disease.

Alzheimer's disease (AD) is the most common neurological disease and a serious cause of dementia, which constitutes a threat to human health. The clinical evidence has found that extracellular amyloid-beta peptides (Aβ), phosphorylated tau (p-tau), and intracellular tau proteins, which are derived from the amyloid precursor protein (APP), are the leading biomarkers for accurate and early diagnosis of AD due to their central role in disease pathology, their correlation with disease progression, their diagnostic value, and their implications for therapeutic interventions. Their detection and monitoring contribute significantly to understanding AD and advancing clinical care. Available diagnostic techniques, including magnetic resonance imaging (MRI) and positron emission tomography (PET), are mainly used to validate AD diagnosis. However, these methods are expensive, yield results that are difficult to interpret, and have common side effects such as headaches, nausea, and vomiting. Therefore, researchers have focused on developing cost-effective, portable, and point-of-care alternative diagnostic devices to detect specific biomarkers in cerebrospinal fluid (CSF) and other biofluids. In this review, we summarized the recent progress in developing electrochemical immunosensors for detecting AD biomarkers (Aβ and p-tau protein) and their subtypes (AβO, Aβ(1-40), Aβ(1-42), t-tau, cleaved-tau (c-tau), p-tau181, p-tau231, p-tau381, and p-tau441). We also evaluated the key characteristics and electrochemical performance of developed immunosensing platforms, including signal interfaces, nanomaterials or other signal amplifiers, biofunctionalization methods, and even primary electrochemical sensing performances (i.e., sensitivity, linear detection range, the limit of detection (LOD), and clinical application).

Polymer Brushes on Silica Nanostructures Prepared by Aminopropylsilatrane Click Chemistry: Superior Antifouling and Biofunctionality.

In nanobiotechnology, the importance of controlling interactions between biological molecules and surfaces is paramount. In recent years, many devices based on nanostructured silicon materials have been presented, such as nanopores and nanochannels. However, there is still a clear lack of simple, reliable, and efficient protocols for preventing and controlling biomolecule adsorption in such structures. In this work, we show a simple method for passivation or selective biofunctionalization of silica, without the need for polymerization reactions or vapor-phase deposition. The surface is simply exposed stepwise to three different chemicals over the course of ∼1 h. First, the use of aminopropylsilatrane is used to create a monolayer of amines, yielding more uniform layers than conventional silanization protocols. Second, a cross-linker layer and click chemistry are used to make the surface reactive toward thiols. In the third step, thick and dense poly(ethylene glycol) brushes are prepared by a grafting-to approach. The modified surfaces are shown to be superior to existing options for silica modification, exhibiting ultralow fouling (a few ng/cm2) after exposure to crude serum. In addition, by including a fraction of biotinylated polymer end groups, the surface can be functionalized further. We show that avidin can be detected label-free from a serum solution with a selectivity (compared to nonspecific binding) of more than 98% without the need for a reference channel. Furthermore, we show that our method can passivate the interior of 150 nm × 100 nm nanochannels in silica, showing complete elimination of adsorption of a sticky fluorescent protein. Additionally, our method is shown to be compatible with modifications of solid-state nanopores in 20 nm thin silicon nitride membranes and reduces the noise in the ion current. We consider these findings highly important for the broad field of nanobiotechnology, and we believe that our method will be very useful for a great variety of surface-based sensors and analytical devices.

A Study of the Interface of Gold Nanoparticles Conjugated to Cowpea Fe-Superoxide Dismutase.

The iron superoxide dismutase (FeSOD) is a first barrier to defend photosynthetic organisms from superoxide radicals. Although it is broadly present in plants and bacteria, FeSODs are absent in animals. They belong to the same phylogenic family as Mn-containing SODs, which are also highly efficient at detoxifying superoxide radicals. In addition, SODs can react with peroxynitrite, and FeSOD enzyme has already been used to evaluate the anti-nitrative capacity of plant antioxidants. Gold nanoparticles (AuNPs) have been shown to significantly improve the functionality and the efficiency of ligands, providing they are properly assembled. In this work, the characteristics of the recombinant cowpea (Vigna unguiculata) FeSOD (rVuFeSOD) immobilized onto AuNPs were investigated as a function of (1) NP surface chemistry and (2) biofunctionalization methods, either physical adsorption or covalent bonding. The NP surface chemistry was studied by varying the concentration of the ligand molecule 11-mercaptoundecanoic acid (MUA) on the NP surface. The coverage and activity of the protein on AuNPs was determined and correlated to the surface chemistry and the two biofunctionalization methods. rVuFeSOD-AuNPs conjugate stability was monitored through absorption measurements, agarose gel electrophoresis and DLS, enzymatic activity by a colorimetric assay and by in-gel activity assay, and coverage was measured by colorimetric assay. When using physical adsorption, the NP is the most perturbing agent for the activity of the enzyme. In contrast, only the NP coverage was affected by MUA ligand concentration. However, during covalent attachment, both the NP and the concentration of MUA on the surface influenced the enzyme activity, while the coverage of the NP remained constant. The results evidence the importance of the biomolecule and AuNP interaction for the functionality of the hybrid. These strategies can be used to develop electrochemical biosensors for O2•- and for peroxynitrite in biomedical applications.

Improved cell adhesion to activated vapor silanization-biofunctionalized Ti-6Al-4V surfaces with ECM-derived oligopeptides

Titanium implants are widely used in traumatology and various orthopedic fields. Titanium and other metallic-based implants have limited structural and functional integration into the body, which translates into progressive prosthesis instability and the need for new surgical interventions that have enormous social and economic impacts. To enhance the biocompatibility of titanium implants, numerous biofunctionalization strategies have been developed. However, the problem persists, as more than 70% of implant failures are due to aseptic loosening. In this study we addressed the problem of improving the physiological engraftability and acceptability of titanium-based implants by applying a robust and versatile functionalization method based on the covalent immobilization of extracellular matrix (ECM)-derived oligopeptides on Ti-6Al-4V surfaces treated by activated vapor silanization (AVS). The feasibility of this technique was evaluated with two oligopeptides of different structures and compositions. These oligopeptides were immobilized on Ti-6Al-4V substrates by a combination of AVS and N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) crosslinking chemistry. The immobilization was shown to be stable and resistant to chemical denaturing upon sodium dodecyl sulfate treatment. On Ti-6Al-4V surfaces both peptides increased the attachment, spreading, rearrangement and directional growth of mesenchymal stem and progenitor cells (MSC) with chondro- and osteo-regenerative capacities. We also found that this biofunctionalization method (AVS-EDC/NHS) increased the attachment capacity of an immortalized cell line of neural origin with poor adhesive properties, highlighting the versatility and robustness of this method in terms of potential oligopeptides that may be used, and cell lineages whose anchorage to the biomaterial may be enhanced. Collectively, this novel functionalization strategy can accelerate the development of advanced peptide-functionalized metallic surfaces, which, in combination with host or exogenously implanted stem cells, have the potential to positively affect the osteoregenerative and osteointegrative abilities of metallic-based prostheses.

Neurons-on-a-Chip: In Vitro NeuroTools.

Neurons-on-a-Chip technology has been developed to provide diverse in vitro neuro-tools to study neuritogenesis, synaptogensis, axon guidance, and network dynamics. The two core enabling technologies are soft-lithography and microelectrode array technology. Soft lithography technology made it possible to fabricate microstamps and microfluidic channel devices with a simple replica molding method in a biological laboratory and innovatively reduced the turn-around time from assay design to chip fabrication, facilitating various experimental designs. To control nerve cell behaviors at the single cell level via chemical cues, surface biofunctionalization methods and micropatterning techniques were developed. Microelectrode chip technology, which provides a functional readout by measuring the electrophysiological signals from individual neurons, has become a popular platform to investigate neural information processing in networks. Due to these key advances, it is possible to study the relationship between the network structure and functions, and they have opened a new era of neurobiology and will become standard tools in the near future.

Optimization of sensing-pad functionalizing strategy toward separative extended-gate FET biosensors for PSA detection

In this study, separative extended-gate AlGaAs/GaAs high electron mobility transistor (HEMT) biosensor is proposed for prostate-specific antigen (PSA) detection. Zinc oxide nanotetrapods (T-ZnO) with a four-leg structure is introduced onto the sensing pad to form a three-dimensional (3D) and concave detection front. Compared with common plane front, the elaborately-designed-3D and concave detection front can offer more biological modification sites and decrease the Debye volume, resultantly improving both the detection scope and sensitivity. Anti-PSA probes can be fixed at any sites of T-ZnO via a chemical bio-functionalization method, which facilitates better detection performance by comparison with a physical modification scheme. On the other hand, the T-ZnO nanostructures with the four-leg configuration are capable of releasing the stress and erosion effect of the solution on the plane Au film, contributing to a great improvement in the reliability of the biosensors. The optimized biosensors with chemical bio-functionalized T-ZnO detection front demonstrate good linear current/voltage response to label-free PSA target in the concentration range from 5 fg/ml~5 ng/ml and a sensitivity variation ~ 1.3% dec−1.

Efficient Chemical Surface Modification Protocol on SiO2 Transducers Applied to MMP9 Biosensing.

The bioreceptor immobilization process (biofunctionalization) turns to be one of the bottlenecks when developing a competent and high sensitivity label-free biosensor. Classical approaches seem to be effective but not efficient. Although biosensing capacities are shown in many cases, the performance of the biosensor is truncated by the inefficacious biofunctionalization protocol and the lack of reproducibility. In this work, we describe a unique biofunctionalization protocol based on chemical surface modification through silane chemistry on SiO2 optical sensing transducers. Even though silane chemistry is commonly used for sensing applications, here we present a different mode of operation, applying an unusual silane compound used for this purpose (3-Ethoxydimethylsilyl)propylamine, APDMS, able to create ordered monolayers, and minimizing fouling events. To endorse this protocol as a feasible method for biofunctionalization, we performed multiple surface characterization techniques after all the process steps: Contact angle (CA), X-ray photoelectron spectroscopy (XPS), ellipsometry, and fluorescence microscopy. Finally, to evidence the outputs from the SiO2 surface characterization, we used those SiO2 surfaces as optical transducers for the label-free biosensing of matrix metalloproteinase 9 (MMP9). We found and demonstrated that the originally designed protocol is reproducible, stable, and suitable for SiO2-based optical sensing transducers.

Biocompatible Graphene Oxide Nanosheets Densely Functionalized with Biologically Active Molecules for Biosensing Applications

Graphene oxide (GO) has immense potential for widespread use in diverse in vitro and in vivo biomedical applications owing to its thermal and chemical resistance, excellent electrical properties and solubility, and high surface-to-volume ratio. However, development of GO-based biological nanocomposites and biosensors has been hampered by its poor intrinsic biocompatibility and difficult covalent biofunctionalization across its lattice. Many studies exploit the strategy of chemically modifying GO by noncovalent and reversible attachment of (bio)molecules or sole covalent biofunctionalization of residual moieties at the lattice edges, resulting in a low coating coverage and a largely bioincompatible composite. Here, we address these problems and present a facile yet powerful method for the covalent biofunctionalization of GO using colamine (CA) and the poly(ethylene glycol) cross-linker that results in a vast improvement in the biomolecular coating density and heterogeneity across the entire GO lattice. We further demonstrate that our biofunctionalized GO with CA as the cross-linker provides superior nonspecific biomolecule adhesion suppression with increased biomarker detection sensitivity in a DNA-biosensing assay compared to the (3-aminopropyl)triethoxysilane cross-linker. Our optimized biofunctionalization method will aid the development of GO-based in situ applications including biosensors, tissue nanocomposites, and drug carriers.

Substrate Materials for Biomolecular Immobilization within Electrochemical Biosensors.

Electrochemical biosensors have potential applications for agriculture, food safety, environmental monitoring, sports medicine, biomedicine, and other fields. One of the primary challenges in this field is the immobilization of biomolecular probes atop a solid substrate material with adequate stability, storage lifetime, and reproducibility. This review summarizes the current state of the art for covalent bonding of biomolecules onto solid substrate materials. Early research focused on the use of Au electrodes, with immobilization of biomolecules through ω-functionalized Au-thiol self-assembled monolayers (SAMs), but stability is usually inadequate due to the weak Au–S bond strength. Other noble substrates such as C, Pt, and Si have also been studied. While their nobility has the advantage of ensuring biocompatibility, it also has the disadvantage of making them relatively unreactive towards covalent bond formation. With the exception of Sn-doped In2O3 (indium tin oxide, ITO), most metal oxides are not electrically conductive enough for use within electrochemical biosensors. Recent research has focused on transition metal dichalcogenides (TMDs) such as MoS2 and on electrically conductive polymers such as polyaniline, polypyrrole, and polythiophene. In addition, the deposition of functionalized thin films from aryldiazonium cations has attracted significant attention as a substrate-independent method for biofunctionalization.

A Green Strategy to Synthesize and Characterization of CuO Nanoparticles for Antimicrobial Applications

Green synthesis of nanoparticles is the recent and advanced technology in the fields of nanoscience and biotechnology which produces the eco-friendly and more efficient antimicrobial agents. Therefore, present study reported a simple, suitable and cost effective method of preparation of bioactive antimicrobial agents by the green strategy of copper oxide nanoparticles with Moringa oleifera through a green route method. In this green process the vital and varsatile medicinal quality plant i.e., Moringa oleifera leaves extract as a reducing agent as well as stabilizing agent were used to prepare the copper oxide nanoparticles. The synthesized copper oxide nanoparticles were characterized by UV- Vis, SEM, and TEM techniques. The antibacterial activity of the samples were tested by disc diffusion method against gram positive bacteria (S.aureus), gram negative bacteria (E.coli ). The size of synthesized copper oxide nanoparticles was in the ranges around 60-100 nm with dot and spherical shaped morphology. The antimicrobial activities of biofunctionalized copper oxide nanoparticles were observed significant inhibition activity. From this analysis, the green synthesized biofunctionalization method what we have suggested is exposed assure results in the antibacterial activity tests. Moreover, biofunctionalized copper oxide nanoparticles are shown superior performance in the opposed to of microbes.

A Point-of-Care Immunosensor Based on a Quartz Crystal Microbalance with Graphene Biointerface for Antibody Assay.

We present a sensitive and low-cost immunoassay, based on a customized open-source quartz crystal microbalance coupled with graphene biointerface sensors (G-QCM), to quantify antibodies in undiluted patient serum. We demonstrate its efficacy for a specific antibody against the phospholipase A2 receptor (anti-PLA2R), which is a biomarker in primary membranous nephropathy. A novel graphene–protein biointerface was constructed by adsorbing a low concentration of denatured bovine serum albumin (dBSA) on the reduced graphene oxide (rGO) sensor surface. The dBSA film prevents the denaturation of the protein receptor on the rGO surface and serves as the cross-linker for immobilization of the receptor for anti-PLA2R antibodies on the surface. The detection limit and selectivity of this G-QCM biosensor was compared with a commercial QCM system. The G-QCM immunoassay exhibited good specificity and high sensitivity toward the target, with an order of magnitude better detection limit (of 100 ng/mL) compared to the commercial system, at a fraction of the cost and with considerable time saving. The results obtained from patient sera compared favorably with those from enzyme-linked immunosorbent assay, validating the feasibility of use in clinical applications. The multifunctional dBSA-rGO platform provides a promising biofunctionalization method for universal immunoassay and biosensors. With the advantages of inexpensive, rapid, and sensitive detection, the G-QCM sensor and instrument form an effective autoimmune disease screening tool.

Transglutaminase-mediated assembly of multi-enzyme pathway onto TMV brush surfaces for synthesis of bacterial autoinducer-2

Bioelectronic microdevices, with spatially arranged biosynthetic machinery, can be programmed to convert raw materials to high-value products in a controlled manner. Generic methods for biofunctionalization that enable precise control over biocomponent assembly at the nano and meso scales are necessary to diversify the range and capabilities of these systems. Here, we used tobacco mosaic virus (TMV) derived virus like particles (VLPs) as 3D interfacial scaffolds for the assembly of biosynthetic enzymes onto gold electrodes. The TMV capsids are aligned in a vertical brush configuration by cysteine modifications to the capsid protein and by taking advantage of the well-known gold/cysteine affinity. This alignment enables high surface density and biosynthetic enzyme-enzyme proximity. Enzymes are covalently tethered to the capsid protein of TMV by the N- and C-terminal addition of lysine-rich assembly domains which react with surface exposed glutamine residues on the capsid surfaces; the lysine/glutamine linkages are mediated by a microbial transglutaminase (mTG). We demonstrate flexible mTG-mediated assembly of a three-enzyme biosynthetic pathway that converts S-adenosylmethionine (SAM) to autoinducer-2 (AI-2), a bacterial signal molecule that mediates quorum sensing behavior. We propose that our VLP and mTG based fabrication approach will help in the modular assembly of biological components onto microelectronic devices and that these will find utility in many applications including sensing and lab on chip devices.

Characterization Method of Biological Functionalization Process of Silicon Surface Based on Cantilever Biosensor

A novel cantilever array-based biosensor was batch-fabricated with IC compatible MEMS technology for precise liver cancer biomarker detection. A microcavity was designed in the free end of the cantilever for local antibody-immobilization using the micro-printing system, which can dramatically reduce the effect of adsorption-induced stiffness coefficient k variation. These structural features offer several advantages: high sensitivity, high throughput, high mass detection accuracy, and high specification. In addition, the surface biofunctionalization methods were commonly used in biological detection devices are mainly introduced, and the optimal biofunctionalization scheme for silicon-based microcantilever is proposed. The modification procedure of APTES-GA was characterized by cantilever, and the uniform aldehyde surface of the microcantilever was obtained. The immobilization time and culture method of the microcantilever antibodies were optimized to obtain localized, dense and highly active antibody surfaces. Which provides an excellent surface functionalization method for the cantilever biosensor.

Tfbar Sensors for Detection of Explosives Substances

Tfbar Sensors for Detection of Explosives Substances

Establishment of Collagen: Hydroxyapatite/BMP-2 Mimetic Peptide Composites.

Extensive efforts were undertaken to develop suitable biomaterials for tissue engineering (TE) applications. To facilitate clinical approval processes and ensure the success of TE applications, bioinspired concepts are currently focused on. Working on bone tissue engineering, we describe in the present study a method for biofunctionalization of collagen/hydroxyapatite composites with BMP-2 mimetic peptides. This approach is expected to be fundamentally transferable to other tissue engineering fields. A modified BMP-2 mimetic peptide containing a negatively charged poly-glutamic acid residue (E7 BMP-2 peptide) was used to bind positively charged hydroxyapatite (HA) particles by electrostatic attraction. Binding efficiency was biochemically detected to be on average 85% compared to 30% of BMP-2 peptide without E7 residue. By quartz crystal microbalance (QCM) analysis, we could demonstrate the time-dependent dissociation of the BMP-2 mimetic peptides and the stable binding of the E7 BMP-2 peptides on HA-coated quartz crystals. As shown by immunofluorescence staining, alkaline phosphatase expression is similar to that detected in jaw periosteal cells (JPCs) stimulated with the whole BMP-2 protein. Mineralization potential of JPCs in the presence of BMP-2 mimetic peptides was also shown to be at least similar or significantly higher when low peptide concentrations were used, as compared to JPCs cultured in the presence of recombinant BMP-2 controls. In the following, collagen/hydroxyapatite composite materials were prepared. By proliferation analysis, we detected a decrease in cell viability with increasing HA ratios. Therefore, we chose a collagen/hydroxyapatite ratio of 1:2, similar to the natural composition of bone. The following inclusion of E7 BMP-2 peptides within the composite material resulted in significantly elevated long-term JPC proliferation under osteogenic conditions. We conclude that our advanced approach for fast and cost-effective scaffold preparation and biofunctionalization is suitable for improved and prolonged JPC proliferation. Further studies should prove the functionality of composite scaffolds in vivo.

Experimental comparison of surface chemistries for biomolecule immobilization on paper-based microfluidic devices

Biomolecules (e.g. proteins and nucleic acids) as target analytes of microfluidic paper-based analytical devices (μPADs) are usually immobilized on a cellulose paper substrate (with intrinsically anionic surface) through physical adsorptions by van der Waals forces and electrostatic interaction thanks to cationic patches on the biomolecule. However, the physical adsorption could lead to weak biomolecule-substrate binding strength and thus low biosensing performance. Benefitting from the abundance of hydroxyl groups on the cellulose paper, chemical modification based on specific surface chemistries is capable of biofunctionalization on the μPADs by providing functional groups for covalent bindings with the target biomolecule. There are many previous reports on chemical modifications of cellulose surface for improvement of biomolecule immobilization. Nevertheless, no study has been performed on experimental evaluation of modification efficiencies of various biofunctionalization methods in the context of biosensing applications. In this paper, we compare five surface chemistries for protein immobilization on μPADs made from pure cellulose paper. For each chemical modification method, surface analyses were first conducted to monitor the surface modification process. Then, paper-based fluorometric experiments and colorimetric enzyme-linked immunosorbent assays (ELISA) were carried out on paper substrates modified by the five surface chemistries to compare their efficiencies of covalent protein immobilization. Finally, a stability experiment was carried out on the five types of surface-modified paper after 30 d storage. It was demonstrated that the potassium periodate (KIO4)-modified cellulose paper has the best performance with 53% increase in the signal output and 59% decrease in background noise of the colorimetric ELISA, and only 13% bioactivity loss after the 30 d storage. The comparison results provide a valuable experimental guideline for selecting the suitable surface chemistry for protein immobilization on μPADs.