Biodegradable Polymeric Micelles Research Articles

Synthesis of N-acetylcysteine functionalized cholic acid based triarmed poly DL-Lactide and encapsulation of gold nanoparticles: Studies on the antimicrobial activity and biocompatibility for drug delivery applications

Cholic acid based biodegradable reverse polymeric micelles have been widely utilized as preclinically suitable drug delivery system for poorly water-soluble drugs. In this report, we developed N-acetylcysteine functionalized cholic acid based triarmed poly (Dl-lactide) (ACyCA-triarmed (DLL)n as reversed polymeric micelles for drug delivery studies. ACyCA was synthesized via thiol-yne click reaction and subsequently used as an initiator for the synthesis of ACyCA-triarmed (DLL)n through ring opening polymerization (ROP) using Sn (Oct)2 as a catalyst. The synthesized ACyCA-triarmed (DLL)n was characterized using GPC, FT-IR, 1H NMR, 13C NMR, spectrofluorometer, HR-TEM, DSC, TGA, XRD, DLS, and zeta potential techniques. The reverse critical micellar concentration of the polymer was determined to be 1.99 mg/mL using a spectrofluorometer. The synthesized reverse micelles (RMs) were utilized as a reducing and capping agent for the preparation of AuNPs under sunlight exposure. The formed AuNPs exhibited spherical in shape with an average size of ∼ 23.4 nm and Dh was found to be 86.8 ± 1.3 nm as evidenced by the TEM and DLS analysis. Furthermore, the antimicrobial activity, hemolytic activity, anti-oxidant activity, and in-vitro drug release studies were examined for the RMs-AuNPs and compared with RMs. The hydrophobic nature of RMs and RMs-AuNPs had better haemocompatibility at above the reversed CMC. The antioxidant activity RMs-AuNPs showed better inhibitory effect in a dose-dependent manner as compared to RMs. The RMs-AuNPs formulation act as reservoir for solubilization of hydrophobic doxorubicin (Dox.HCl) drugs and can be used as therapeutic platform for slow and sustained release of drugs in biological medium.

Redox-responsive biodegradable dendronized polymers: A side-chain modulation based fabrication of drug delivery vehicles

Among various nanomedicine platforms, stimuli-responsive biodegradable polymeric micelles offer a viable approach to address challenges in cancer therapy. Herein, we report the fabrication of redox-responsive micellar aggregates based on an amphiphilic dendron-polymer conjugate. In particular, acid-degradable hydrophobic polyester dendrons are attached as side chain moieties through a disulfide linkage on a hydrophilic copolymer. Polymers containing three generations of dendrons are synthesized using the thiol-disulfide exchange reaction and utilized to obtain micellar aggregates. The stability of the obtained aggregates, drug loading, and release characteristics in neutral, acidic, and redox environments were investigated. It was established that micelles are efficiently internalized by cells, and the highest level of cytotoxicity was observed for MDA-MB-231 breast cancer carcinoma cells under a reducing environment.

Pluronic F127 and P104 Polymeric Micelles as Efficient Nanocarriers for Loading and Release of Single and Dual Antineoplastic Drugs.

The potential application of biodegradable and biocompatible polymeric micelles formed by Pluronic F127 and P104 as nanocarriers of the antineoplastic drugs docetaxel (DOCE) and doxorubicin (DOXO) is presented in this work. The release profile was carried out under sink conditions at 37 °C and analyzed using the Higuchi, Korsmeyer-Peppas, and Peppas-Sahlin diffusion models. The cell viability of HeLa cells was evaluated using the proliferation cell counting kit CCK-8 assay. The formed polymeric micelles solubilized significant amounts of DOCE and DOXO, and released them in a sustained manner for 48 h, with a release profile composed of an initial rapid release within the first 12 h followed by a much slower phase the end of the experiments. In addition, the release was faster under acidic conditions. The model that best fit the experimental data was the Korsmeyer-Peppas one and denoted a drug release dominated by Fickian diffusion. When HeLa cells were exposed for 48 h to DOXO and DOCE drugs loaded inside P104 and F127 micelles, they showed lower IC50 values than those reported by other researchers using polymeric nanoparticles, dendrimers or liposomes as alternative carriers, indicating that a lower drug concentration is needed to decrease cell viability by 50%.

Intracellular Delivery of Anti-Kirsten Rat Sarcoma Antibodies Mediated by Polymeric Micelles Exerts Strong In Vitro and In Vivo Anti-Tumorigenic Activity in Kirsten Rat Sarcoma-Mutated Cancers.

The Kirsten rat sarcoma viral oncogene (KRAS) is one of the most well-known proto-oncogenes, frequently mutated in pancreatic and colorectal cancers, among others. We hypothesized that the intracellular delivery of anti-KRAS antibodies (KRAS-Ab) with biodegradable polymeric micelles (PM) would block the overactivation of the KRAS-associated cascades and revert the effect of its mutation. To this end, PM-containing KRAS-Ab (PM-KRAS) were obtained using Pluronic F127. The feasibility of using PM for antibody encapsulation as well as the conformational change of the polymer and its intermolecular interactions with the antibodies was studied, for the first time, using in silico modeling. In vitro, encapsulation of KRAS-Ab allowed their intracellular delivery in different pancreatic and colorectal cancer cell lines. Interestingly, PM-KRAS promoted a high proliferation impairment in regular cultures of KRAS-mutated HCT116 and MIA PaCa-2 cells, whereas the effect was neglectable in non-mutated or KRAS-independent HCT-8 and PANC-1 cancer cells, respectively. Additionally, PM-KRAS induced a remarkable inhibition of the colony formation ability in low-attachment conditions in KRAS-mutated cells. In vivo, when compared with the vehicle, the intravenous administration of PM-KRAS significantly reduced tumor volume growth in HCT116 subcutaneous tumor-bearing mice. Analysis of the KRAS-mediated cascade in cell cultures and tumor samples showed that the effect of PM-KRAS was mediated by a significant reduction of the ERK phosphorylation and a decrease in expression in the stemness-related genes. Altogether, these results unprecedently demonstrate that the delivery of KRAS-Ab mediated by PM can safely and effectively reduce the tumorigenicity and the stemness properties of KRAS-dependent cells, thus bringing up new possibilities to reach undruggable intracellular targets.

Orthogonal Covalent Entrapment of Cargo into Biodegradable Polymeric Micelles via Native Chemical Ligation.

Polymeric micelles (PMs) are promising platforms for enhanced tissue targeting of entrapped therapeutic agents. Strategies to circumvent premature release of entrapped drugs include cross-linking of the micellar core as well as covalent attachment of the drug cargo. The chemistry employed to obtain cross-linked micelles needs to be mild to also allow entrapment of fragile molecules, such as certain peptides, proteins, oligonucleotides, and fluorescent dyes. Native chemical ligation (NCL) is a mild bio-orthogonal reaction between a N-terminal cysteine residue and a thioester that proceeds under physiological conditions. Here, we designed a trifunctional cross-linker containing two cysteine residues for the micelle core-cross-linking reaction and an azide residue for ring-strained alkyne conjugation of fluorescent dyes. We applied this approach to thermosensitive methoxypolyethylene glycol-b-N-(2-hydroxypropyl)methacrylamide-lactate (mPEG-b-HPMAmLacn) based block copolymers of a core-cross-linked polymeric micelle (CCPM) system by attaching thioester residues (using ethyl thioglycolate-succinic anhydride, ETSA) for NCL cross-linking with the trifunctional cross-linker under physiological conditions. By use of mild copper-free click chemistry, we coupled fluorescent dyes, Sulfo.Cy5 and BODIPY, to the core via the azide residue present on the cross-linker by triazole ring formation. In addition, we employed a recently developed cycloheptyne strain promoted click reagent (TMTHSI, CliCr) in comparison to the frequently employed cyclooctyne derivative (DBCO), both achieving successful dye entrapment. The size of the resulting CCPMs could be tuned between 50 and 100 nm by varying the molecular weight of the thermosensitive block and ETSA content. In vitro cell experiments showed successful internalization of the dye entrapped CCPMs, which did not affect cell viability up to a polymer concentration of 2 mg/mL in PC3 cells. These fluorescent dye entrapped CCPMs can be applied in diagnostic imaging and the chemistry developed in this study serves as a steppingstone toward covalently entrapped fragile drug compounds with tunable release in CCPMs.

Using Amphiphilic Polymer Micelles as the Templates of Antisolvent Crystallization to Produce Drug Nanocrystals.

Biocompatible and biodegradable amphiphilic polymeric micelles (PLA-CMCS-g-OA) were prepared by surface grafting of oleic acid and polylactic acid onto carboxymethyl chitosan and were used as templates for the crystallization of camptothecin. The camptothecin (CPT) nanocrystals prepared by the novel micelle-templated antisolvent crystallization (mt-ASC) method demonstrated higher crystallinity, narrower particle size distribution, and slower release characteristic than those prepared by conventional antisolvent crystallization (c-ASC) using a high initial concentration and fast addition rate. In particular, the CPT release behavior of mt-ASC products in phosphate buffer solutions presented a pH-responsive characteristic with the increasing release rate of CPT under lower pH conditions. This work confirmed that amphiphilic nanomicelle-templated crystallization was an effective method for preparing drug nanocrystals.

Preparation of hyaluronic acid-coated polymeric micelles for nasal vaccine delivery.

Hyaluronic acid (HA)-coated biodegradable polymeric micelles were developed as nanoparticulate vaccine delivery systems to establish an effective nasal vaccine. We previously reported HA-coated micelles prepared by forming a polyion complex (PIC) of poly(L-lysine)-b-polylactide (PLys+-b-PLA) micelles and HA. The HA-coated micelles exhibited specific accumulation in HA receptor-expressing cells and extremely high colloidal stability under diluted blood conditions. In this study, a model antigen, ovalbumin (OVA), and an adjuvant oligonucleotide containing the CG motif (CpG-DNA) were efficiently loaded in HA-coated micelles via electrostatic interactions. HA-coated micelles delivered OVA and CpG-DNA in mouse bone marrow-derived dendritic cells (BMDCs) and resulted in the upregulation of mRNA encoding IFN-γ and IL-4 in BMDCs. In addition, HA-coated micelles enhanced the expression of the major histocompatibility complex (MHC) class II on BMDCs. We investigated the immune response of HA-coated micelles following intranasal administration. HA-coated micelles induced higher OVA-specific IgG in the blood and OVA-specific IgA in the nasal wash than control (carboxymethyl dextran-coated) micelles. These results suggest that HA-coated micelles efficiently deliver antigens and adjuvants to mucosal-resident immune cells. Therefore, HA-coated micelles are promising platforms for developing nasal vaccines against infectious diseases.

WITHDRAWN: Biodegradable Self-assembled polymeric Micelles based on Poly (ethylene oxide)-block-Polylactide block copolymer for sustained delivery of dapsone

Dapsone is the simplest antibiotic of sulphones that demonstrates its viability against various species of bacteria and protozoa. By restricting dihydrofolic acid synthesis through competition with para-amino benzoate, dapsone inhibits the growth of these microorganisms. Owing to its low aqueous solubility and non-specific distribution in the body, the applicability of dapsone is impeded. A control on pharmacokinetics and targeted delivery of drugs is deeply needed in order to reduce the side effects of the drug and make treatment more progressive. The aim of this study is to increase the bioavailability and efficacy of dapsone through the delivery of MeO-PEO 5K -b-PLA micelles. The effect of the length of the hydrophobic block (PLA) on micelles size, critical micelle concentration, entrapment efficiency, and release study is assessed. The PMs were prepared using the solvent evaporation process. The CMC of synthesized block copolymer was measured using a fluorescence-based method. The size and morphology of PMs was determined by dynamic light scattering (DLS) and atomic force microscopy (AFM). The entrapment efficiency and release kinetic behavior of MeO-PEO 5K -b-PLA based PMs were determined by UV-visible spectroscopy and dispersion method, respectively. The size of micelles increased and the rate of drug release decreased as the length of the PLA block increased. With copolymers having greater PLA block length, the maximum encapsulation efficiency of 89.58 percent for dapsone is attained. A comparison of dapsone's antibacterial activity against S. Aureus is performed and delivered by PMs. In comparison to pure drugs, the MIC for PMs loaded with dapsone has decreased. Morphological analysis based on AFM also verified the decrease in MIC.

A Novel 89Zr-labeled DDS Device Utilizing Human IgG Variant (scFv): "Lactosome" Nanoparticle-Based Theranostics for PET Imaging and Targeted Therapy.

“Theranostics,” a new concept of medical advances featuring a fusion of therapeutic and diagnostic systems, provides promising prospects in personalized medicine, especially cancer. The theranostics system comprises a novel 89Zr-labeled drug delivery system (DDS), derived from the novel biodegradable polymeric micelle, “Lactosome” nanoparticles conjugated with specific shortened IgG variant, and aims to successfully deliver therapeutically effective molecules, such as the apoptosis-inducing small interfering RNA (siRNA) intracellularly while offering simultaneous tumor visualization via PET imaging. A 27 kDa-human single chain variable fragment (scFv) of IgG to establish clinically applicable PET imaging and theranostics in cancer medicine was fabricated to target mesothelin (MSLN), a 40 kDa-differentiation-related cell surface glycoprotein antigen, which is frequently and highly expressed by malignant tumors. This system coupled with the cell penetrating peptide (CPP)-modified and photosensitizer (e.g., 5, 10, 15, 20-tetrakis (4-aminophenyl) porphyrin (TPP))-loaded Lactosome particles for photochemical internalized (PCI) driven intracellular siRNA delivery and the combination of 5-aminolevulinic acid (ALA) photodynamic therapy (PDT) offers a promising nano-theranostic-based cancer therapy via its targeted apoptosis-inducing feature. This review focuses on the combined advances in nanotechnology and material sciences utilizing the “89Zr-labeled CPP and TPP-loaded Lactosome particles” and future directions based on important milestones and recent developments in this platform.

Lyophilization stabilizes clinical-stage core-crosslinked polymeric micelles to overcome cold chain supply challenges.

CriPec technology enables the generation of drug-entrapped biodegradable core-crosslinked polymeric micelles (CCPM) with high drug loading capacity, tailorable size, and drug release kinetics. Docetaxel (DTX)-entrapped CCPM, also referred to as CPC634, have demonstrated favorable pharmacokinetics, tolerability, and enhanced tumor uptake in patients. Clinical efficacy evaluation is ongoing. CPC634 is currently stored (shelf life>5years) and shipped as a frozen aqueous dispersion at temperatures below -60°C, in order to prevent premature release of DTX and hydrolysis of the core-crosslinks. Consequently, like other aqueous nanomedicine formulations, CPC634 relies on cold chain supply, which is unfavorable for commercialization. Lyophilization can help to bypass this issue. Freeze-drying methodology for CCPM was developed by employing CPC634 as a model formulation, and sucrose and trehalose as cryoprotectants. We studied the residual moisture content and reconstitution behavior of the CPC634 freeze-dried cake, as well as the size, polydispersity index, morphology, drug retention, and release kinetics of reconstituted CPC634. Subsequently, the freeze-drying methodology was validated in an industrial setting, yielding a CPC634 freeze-dried cake with a moisture content of less than 0.1wt%. It was found that trehalose-cryoprotected CPC634 could be rapidly reconstituted in less than 5min at room temperature. Critical quality attributes such as size, morphology, drug retention, and release kinetics of trehalose-cryoprotected freeze-dried CPC634 upon reconstitution were identical to those of non-freeze-dried CPC634. Our findings provide proof-of-concept for the lyophilization of drug-containing CCPM and our methodology is readily translatable to large-scale manufacturing for future commercialization.

Hyaluronic acid-coated polymeric micelles with hydrogen peroxide scavenging to encapsulate statins for alleviating atherosclerosis

Inflammation and oxidative stress are two major factors that are involved in the pathogenesis of atherosclerosis. A smart drug delivery system that responds to the oxidative microenvironment of atherosclerotic plaques was constructed in the present study. Simvastatin (SIM)-loaded biodegradable polymeric micelles were constructed from hyaluronic acid (HA)-coated poly(ethylene glycol)-poly(tyrosine-ethyl oxalyl) (PEG-Ptyr-EO) for the purpose of simultaneously inhibiting macrophages and decreasing the level of reactive oxygen species (ROS) to treat atherosclerosis. HA coating endows the micelle system the ability of targeting CD44-positive inflammatory macrophages. Owing to the ROS-responsive nature of PEG-Ptyr-EO, the micelles can not only be degraded by enzymes, but also consumes ROS by itself at the pathologic sites, upon which the accumulation of pro-inflammatory macrophages is effectively suppressed and oxidative stress is alleviated. Consequently, the cellular uptake experiment demonstrated that SIM-loaded HA-coated micelles can be effectively internalized by LPS-induced RAW264.7 cells and showed high cytotoxicity against the cells, but low cytotoxicity against LO2 cells. In mouse models of atherosclerosis, intravenously SIM-loaded HA-coated micelles can effectively reduce plaque content of cholesterol, resulting in remarkable therapeutic effects. In conclusion, the SIM-loaded micelle system provides a promising and innovative option against atherosclerosis.

A Red Light‐Triggered Drug Release System Based on One‐Photon Upconversion‐Like Photolysis

Photoresponsive drug release systems can enhance drug accumulation at the sites where light is applied. Nowadays, the photocleavable groups used in the systems usually require ultraviolet or blue light irradiation, which limits tissue penetration depth and is harmful to normal cells and living bodies. A one-photon upconversion-like photolysis strategy, which can cleave green light-activatable prodrugs with red light at the presence of a red light-excitable photosensitizer in organic solvents, is developed. However, both the prodrug and photosensitizer are hydrophobic and their energy transfer process is sensitive to oxygen molecules. Here, a simple strategy to address these problems by loading the two components in biocompatible and biodegradable polymeric micelles, is presented. The developed low-irradiance red light-triggered drug release system has a size around 40nm and exhibits good stability in aqueous solutions. The micellar encapsulation protects the photolysis reaction from oxygen quenching in normoxia aqueous solutions. The therapeutic effect of the system enhanced by the redlight irradiation is demonstrated through in vitro and in vivo studies, indicating promising potential in cancer therapy. The study provides the first example and also an important reference for applying one-photon upconversion-like photolysis in biomedical applications.

High-drug-loading capacity of redox-activated biodegradable nanoplatform for active targeted delivery of chemotherapeutic drugs

Challenges associated with low-drug-loading capacity, lack of active targeting of tumor cells and unspecific drug release of nanocarriers synchronously plague the success of cancer therapy. Herein, we constructed active-targeting, redox-activated polymeric micelles (HPGssML) self-assembled aptamer-decorated, amphiphilic biodegradable poly (benzyl malolactonate-co-ε-caprolactone) copolymer with disulfide linkage and π-conjugated moieties. HPGssML with a homogenous spherical shape and nanosized diameter (∼150 nm) formed a low critical micellar concentration (10−3 mg/mL), suggesting good stability of polymeric micelles. The anticancer drug, doxorubicin (DOX), can be efficiently loaded into the core of micelles with high-drug-loading content via strong π–π interaction, which was verified by a decrease in fluorescence intensity and redshift in UV adsorption of DOX in micelles. The redox sensitivity of polymeric micelles was confirmed by size change and in vitro drug release in a reducing environment. Confocal microscopy and flow cytometry assay demonstrated that conjugating aptamers could enhance specific uptake of HPGssML by cancer cells. An in vitro cytotoxicity study showed that the half-maximal inhibitory concentration (IC50) of DOX-loaded HPGssML was two times lower than that of the control group, demonstrating improved antitumor efficacy. Therefore, the multifunctional biodegradable polymeric micelles can be exploited as a desirable drug carrier for effective cancer treatment.

Preparation and optimization of biodegradable self-assembled PCL-PEG-PCL nano-sized micelles for drug delivery systems

Biodegradable polymeric micelles have potential therapeutic applications; nevertheless, preparing micelles of a specific diameter and uniform size distribution is a challenge. Micelles were formed from the copolymer of poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) and the effect of PCEC molecular weight, PCL/PEG ratio, solvent-water miscibility, solvent concentration on particle size, polydispersity index and zeta potential of micelles were also investigated. The average particle sizes of the PCEC micelles ranged between 225–959 and 232–1211 nm for micelles prepared with acetone and dimethylformamide, respectively. The encapsulation efficiency is 78.98%. These results indicate that PCEC micelles can be used as drug carriers in controlled delivery systems.

Scalable Self-Assembling Micellar System for Enhanced Oral Bioavailability and Efficacy of Lisofylline for Treatment of Type-I Diabetes

The study summarizes the development of an orally active nanoformulation of a potent but one of the least explored molecules, lisofylline (LSF), in type 1 diabetes (T1D). LSF undergoes rapid metabolism, resulting in poor oral bioavailability and short half-life. In this work, to improve its pharmacokinetic (PK) properties, LSF was encapsulated in the form of its ester prodrug [LSF-linoleic acid (LA) prodrug] into biodegradable self-assembling polymeric micelles [LSF-LA PLM, size: 149.3 nm; polydispersity index: 0.209; critical micelle concentration (cmc); 5.95 μg/mL and Nagg: 14.82 at 10 cmc] of methoxypoly(ethylene glycol)-b-poly(carbonate-co-l-lactide) (mPEG-b-P(CB-co-LA)) block copolymer. LSF-LA PLM was found to be equally effective as the LSF-LA prodrug in cell culture studies in insulin-secreting MIN6 cells and showed excellent stability in simulating biological fluids and plasma. PK of LSF-LA PLM (10 mg/kg dose) revealed a significant improvement in oral bioavailability of LSF (74.86%; 3.3-fold increase in comparison to free LSF) and drastic reduction in the drug metabolism. Further, LSF-LA PLM showed a significant reduction in fasting glucose levels and increase in insulin levels by intraperitoneal as well oral routes in a streptozotocin (STZ)-induced T1D rat model. Production of inflammatory cytokines (TNF-α and IFN-γ) and different biochemical markers for liver and kidney functions were much reduced in diabetic animals after treatment with LSF-LA PLM. LSF-LA PLM-treated pancreatic sections showed minimal infiltration of CD4+ and CD8+ T-cells as indicated by hematoxylin/eosin staining and immunohistochemical analysis.

Biodegradable reduction-responsive polymeric micelles for enhanced delivery of melphalan to retinoblastoma cells

Melphalan (MEL) is an effective chemotherapeutic agent for treatment of retinoblastoma (Rb) which is the most common childhood malignancy. However, the inherent cardiopulmonary toxicity and hazardous integration limit its therapeutic effect on RB. N-Acetylheparosan (AH), a natural heparin-like polysaccharide in mammals with long circulation effect and good biocompatibility, was linked by d-α-tocopherol acid succinate (VES) via and cystamine (CYS) to synthesize reduction-responsive N-acetylheparosan-CYS-Vitamin E succinate (AHV) copolymers. In addition, CYS was replaced by adipic acid dihydrazide (ADH) to obtain a control of non-reduction-responsive polymers N-acetylheparosan-ADH-Vitamin E succinate (ADV). MEL-loaded AHV micelles (MEL/AHV) as well as ADV micelles (MEL/ADV) were prepared with small particle size and high drug loading content. In vitro drug release showed that MEL/AHV micelles presented obvious reduction-triggered release behavior compared with MEL/ADV. In vitro antitumor effects were investigated using WERI-Rb-1 retinoblastoma cells. Cytotoxicity experiments showed that the IC50 of MEL/AHV was significantly lower than that of free MEL and MEL/ADV, suggesting that MEL/AHV enhanced the cytotoxicity against retinoblastoma cells. Furthermore, MEL/AHV micelles were more easily uptaken by multiple pathways compared with MEL/ADV and free MEL. Therefore, MEL/AHV might be a potential delivery system for enhanced delivery of melphalan to Rb cells.

Alendronate-Modified Polymeric Micelles for the Treatment of Breast Cancer Bone Metastasis.

Although the prognosis of patients with breast cancer continues to improve, breast cancer metastasis to bones remains high in incidence and challenging to manage. Here, we report the development of bone-homing alendronate (ALN)-anchored biodegradable polymeric micelles for the targeted treatment of metastatic cancer to bone. These micelles exhibited bone protective capacity including the recruitment, differentiation, and resorption activity of the osteoclasts. Encapsulation of docetaxel (DTX), the first-line chemotherapeutic for treatment of metastatic breast cancer, in ALN-modified micelles results in a sustained release, enhanced cytotoxicity, and improved pharmacokinetics. In the syngeneic animal model of late-stage disseminated breast cancer bone metastasis, the treatment with targeted DTX-loaded micelles attenuated the tumorigenesis and significantly improved animal lifespan compared to the conventional surfactant-based formulation (free DTX). These findings indicate potential applications of the osteotropic nanomedicines for bone metastasis treatment.

Dendron-Polymer Conjugate Based Cross-Linked Micelles: A Robust and Versatile Nanosystem for Targeted Delivery.

Among various nanomedicine platforms, biodegradable polymeric micelles offer a viable approach to targeted cancer therapy. Herein, we report fabrication of core-cross-linked micelles using dendron-polymer conjugates as building blocks. Hydrophobic polyester dendrons containing peripheral alkene groups are conjugated to a hydrophilic poly(ethylene glycol) based copolymer bearing activated ester groups for appending an amine-containing peptide based targeting group, namely, cRGDfK. Micellar constructs assembled in aqueous media were cross-linked using a tetra-thiol molecule via the photochemical thiol-ene reaction. Cross-linked and non-cross-linked micelles were compared in terms of their critical micellar concentration, stability, drug loading, and drug release characteristics. It was observed that the cross-linked micelles were stable upon excessive dilution compared to their non-cross-linked counterparts. Importantly, the amount of passive drug release in neutral pH was considerably lower for the cross-linked micellar systems. Furthermore, treatment of MDA-MB-231 breast cancer cells with nontargeted and targeted cross-linked micelles demonstrated higher internalization of the targeted construct. In corroboration, in vitro assay revealed that drug loaded targeted micelles possessed higher cytotoxicity than the nontargeted ones. Facile fabrication of this modular platform which can carry a desired therapeutic agent and be conjugated with appropriate targeting units, along with the attributes necessary to serve as a viable drug delivery system, offers a platform with potential for addressing various challenges in the field of micellar drug delivery.

Glucose-installed biodegradable polymeric micelles for cancer-targeted drug delivery system: synthesis, characterization and in vitro evaluation.

Glucose metabolism of cancer can be used as a strategy to target cancer cells which exhibit altered glycolytic rate. The facilitated glucose transporter (Glut) plays an important role in enhancement glycolytic rate resulting in increased glucose uptake into cancer cells. 18FGD-PET image is an example for using Glut as a targeting to diagnose the high glycolytic rate of tumor. Thus, Glut may be adapted to target cancer cells for drug delivery system. Herein, biodegradation polymeric micelles target cancer cells by Glut was fabricated. The amphiphilic block copolymer of poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL) was synthesized where terminal group of the PEG chain was installed with glucose molecules. The 1H-NMR confirmed the existence of glucose moiety from two distinct peaks (5.2 and 4.7 ppm) of protons at anomeric carbon of glucose. Glucose-PEG-b-PCL spontaneously forms micelles in an aqueous solution. The size and zeta potential were 22 nm and -7 mv, respectively. Glucose-micelles have high stability, and no evidence of cytotoxicity was found after incubation for 7 days. Doxorubicin, used as a fluorescent probe, was loaded into glucose-micelles. The enhanced amount of doxorubicin as a result of glucose-micelles in PC-3, MCF-7 and HepG2 was evaluated by fluorescence microscopy and flow cytometer. Glucose molecules on the surface of micelles increased internalization and enhanced uptake of micelles via bypassing endocytosis pathway. These results show the use of glucose as a targeting ligand on the micelle surface to target cancer cells via Glut.

Novel thermoresponsive star-liked nanomicelles for targeting of anticancer agent

Micelles are frequently used as drug carriers in the area of nanomedicine owing to their high potential for cancer therapy. In this study, we report the synthesis of a novel thermoresponsive star-liked amphiphilic block copolymer based on poly(ɛ-caprolactone)-b-poly(N-isopropylacrylamide) [HAPs-g-PCL-b-PNIPAM] by ring-opening (ROP) and reversible addition fragmentation chain transfer (RAFT) polymerization. The micellar properties and thermoresponsive behavior of HAPs-g-PCL-b-PNIPAM were investigated by Transmission electron microscopy (TEM), Field emission-scanning electron microscopy (FE-SEM), ultraviolet–visible (UV–Vis) spectroscopies, dynamic light scattering (DLS) and Differential scanning calorimetry (DSC) measurements. We developed a biodegradable star-liked polymeric micelle for the overcome limitations of docetaxel (DTX)-loading and to enhanced pharmacokinetics. The DTX-encapsulation efficiency was obtained to be 95.5%. Release behaviors of DTX from the nanomicelles demonstrated that the rate of DTX release could be efficiently controlled by temperature and pH value. We demonstrated the cytotoxicity of the drug in vitro against breast cancer cell line (MCF7) using the MTT assays, DAPI staining, and cellular uptake. In conclusion, we visualized that the synthesized DTX-nanomicelles can be used as an anticancer drug delivery system considering their useful biocompatibility and excellent physicochemical properties.