Biocompatible Elastomer Research Articles

3D Printed Carbon Nanotubes Reinforced Polydimethylsiloxane Flexible Sensors for Tactile Sensing

Technology is constantly evolving, and chronic health issues are on the rise. It is essential to have affordable and easy access to remote biomedical measurements. This makes flexible sensors a more attractive choice owing to their high sensitivity and flexibility along with low cost and ease of use. As an additional advantage, 3D printing has become increasingly popular in areas such as biomedicine, environment, and industry. This study demonstrates 3D-printed flexible sensors for tactile sensing. A biocompatible silicone elastomer such as polydimethylsiloxane (PDMS) with low elastic modulus and high stretchability makes an excellent wearable sensor material. Incorporating CNTs at varying concentrations (0.5, 1, 2)wt% enhances the sensor’s mechanical strength, conductivity, and responsiveness to mechanical strain. In addition to enhancing the thermal stability of the composite by 44%, multi-walled carbon nanotubes (MWCNTs) also enhanced the breaking strength by 57% with a 2 wt% CNT loading. Moreover, the contact angle values improved by 15%, making it a biomedical-grade hydrophobic surface. The electrical characteristics of these sensors reveal excellent strain sensitivity, making them perfect for monitoring finger movements and biomedical measurements. Overall, 2 wt% CNT-PDMS sensors exhibit optimal performance, paving the way for advanced tactile sensing in biomedical and industrial settings.

Dynamic healing-assembly for biocompatible, biodegradable, stretchable and self-healing triboelectric nanogenerators

Triboelectric nanogenerators (TENGs) have great potential as power sources for on-skin and implantable electronics. However, most existing TENGs are not suitable for the above applications due to limited material choices, often characterized by rigidity, susceptibility to damage, biological incompatibility, and non-biodegradability. Herein, we developed a simple self-healing assembly strategy based on introducing dynamic Cu(II)-dimethylglyoxime-urethane groups into a biocompatible and biodegradable polyurethane elastomer, to simultaneously address the above obstacles. The coordination of Cu2+ with dynamic bonds significantly enhanced the mechanical properties of elastomer, resulting in a modulus of 9.4 MPa and toughness of 40.2 MJ/m3. These bonds also gave the elastomer skin-like self-healing capabilities, achieving a healing efficiency of 77.5 % at 80 °C. Subsequently, a highly stretchable and integrated triboelectric nanogenerator (Cu-POU TENG) with self-healing capabilities was developed. The Cu-POU TENG with an effective area of 1.5 × 1.5 cm2 produced an open-circuit voltage of 38 V in single-electrode mode. The Cu-POU TENG could restore its original electrical properties through self-healing after mechanical damage. Furthermore, the Cu-POU TENG exhibited biocompatibility and biodegradability, making it suitable for on-skin and implantable electronics. Notably, the Cu-POU TENG maintained a stable voltage output throughout the degradation process. The integration of self-healing feature enabled a sophisticated structure, allowing the Cu-POU TENG to function effectively as a motion sensor for tracking body movement. This Cu-POU TENG holds great potential for applications in on-skin and implantable electronics.

A Molecular Rheology Dynamics Study on 3D Printing of Liquid Crystal Elastomers.

This work presents a rheological study of a biocompatible and biodegradable liquid crystal elastomer (LCE) ink for three dimensional (3D) printing. These materials have shown that their structural variations have an effect on morphology, mechanical properties, alignment, and their impact on cell response. Within the last decade LCEs are extensively studied as potential printing materials for soft robotics applications, due to the actuation properties that are produced when liquid crystal (LC) moieties are induced through external stimuli. This report utilizes experiments and coarse-grained molecular dynamics to study the macroscopic rheology of LCEs in nonlinear shear flow. Results from the shear flow simulations are in line with the outcomes of these experimental investigations. This work believes the insights from these results can be used to design and print new material with desirable properties necessary for targeted applications.

High dielectric transparent polymer composite with well-organized carboxymethyl cellulose microfibers in silicon elastomer fabricated under direct current electric field

The combination of transparency, high dielectric permittivity, biocompatibility and flexibility is highly desired in the embedded capacitors. Herein, we show that assembling biodegradable sodium carboxymethyl cellulose (CMC) microfibers in biocompatible silicon elastomer (PDMS) under direct current (DC) electric field enables the production of high dielectric constant composite film with above desired properties. This process leads to the formation of columns of CMC microfibers spanning across the thickness direction, thus generating microfiber depleted regions in between fibers and polymer matrix. The as-prepared composite film with CMC (15 wt%) aligned exhibits a remarkable and an almost sevenfold higher dielectric permittivity as compared to that of the film with CMC randomly dispersed (72 vs 11.4, at 100 Hz). This high CMC loading does not compromise the flexibility and optical transmittance. Interestingly, the compression modulus along the thickness direction increases by >20 times from 16.4 MPa (CMC unaligned) to 339.9 MPa (CMC aligned). We demonstrate a facile strategy of fabricating high dielectric materials combining transparency, biocompatibility, flexibility and compression resistant, making the dielectric materials more versatile. This work shows that biomass derived CMC is a promising filler for high dielectric constant polymer composites benefiting from electric field driven construction of ordered micromorphology.

Biomechanical and Biological Assessment of Polyglycelrolsebacate-Coupled Implant with Shape Memory Effect for Treating Osteoporotic Fractures.

Poly(glycerol sebacate) is a biocompatible elastomer that has gained increasing attention as a potential biomaterial for tissue engineering applications. In particular, PGS is capable of providing shape memory effects and allows for a free form, which can remember the original shape and obtain a temporary shape under melting point and then can recover its original shape at body temperature. Because these properties can easily produce customized shapes, PGS is being coupled with implants to offer improved fixation and maintenance of implants for fractures of osteoporosis bone. Herein, this study fabricated the OP implant with a PGS membrane and investigated the potential of this coupling. Material properties were characterized and compared with various PGS membranes to assess features such as control of curing temperature, curing time, and washing time. Based on the ISO 10993-5 standard, in vitro cell culture studies with C2C12 cells confirmed that the OP implant coupled with PGS membrane showed biocompatibility and biomechanical experiments indicated significantly increased pullout strength and maintenance. It is believed that this multifunctional OP implant will be useful for bone tissue engineering applications.

Highly Biocompatible Polyester-Based Piezoelectric Elastomer with Antitumor and Antibacterial Activity for Ultrasound-Enhanced Piezoelectric Therapy.

Currently, the use of piezoelectric materials to provide sustainable and noninvasive bioelectric stimulation to eradicate tumor cells and accelerate wound healing has raised wide attention. The development of a multifunctional piezoelectric elastomer with the ability to perform in situ tumor therapy as well as wound repair is of paramount importance. However, current piezoelectric materials have a large elastic modulus and limited stretchability, making it difficult to match with the dynamic curvature changes of the wound. Therefore, by copolymerizing lactic acid, butanediol, sebacic acid, and itaconic acid to develop a piezoelectric elastomer (PLBSIE), we construct a new ultrasound-activated PLBSIE-based tumor/wound unified therapeutic platform. Excitedly, it showed outstanding piezoelectric performance and high stretchability, and the separated carrier could react with water to generate highly cytotoxic reactive oxygen species (ROS), contributing to effectively killing tumor cells and eliminating bacteria through piezoelectric therapy. In addition, ultrasound-triggered piezoelectric effects could promote the migration and differentiation of wound-healing-related cells, thus accelerating wound healing. Herein, such a piezoelectric elastomer exerted a critical role in postoperative tumor-induced wound therapy and healing with the merits of possessing multifunctional abilities. Taken together, the developed ultrasound-activated PLBSIE will offer a comprehensive treatment for postoperative osteosarcoma therapy.

Biocompatible and stretchable piezoelectric elastomer based on lactic acid for synchronous repairing and function monitoring of volumetric muscle loss

The treatment of volumetric muscle loss (VML) and the real-time monitoring of damaged muscle function have long posed challenges for clinicians. The novel in-situ electric stimuli therapy using piezoelectric materials for VML repairing has attracted numerous attentions. However, the reciprocating motion of the muscle requires the piezoelectric materials with both high piezoelectricity and stretchability. In this study, a biocompatible piezoelectric elastomer (VMLRE) was synthesized through the copolymerization of several bio-based diacids and diols. By controlling the chemical compositions and chain structure, the VMLRE possess elastic modulus accurately matching with that of muscle tissue, allowing the reciprocal deformation during muscle movements to realize function recovery evaluating. The backbone of VMLRE is enriched with CO dipoles to achieve excellent piezoelectric properties, which enable converting mechanical stimuli generated by physical activity into electrical energy, providing real-time and in situ electrical stimulation. The electric stimulation promotes myoblast proliferation and differentiation by potentially activating calcium/calmodulin signaling pathways, facilitating cell migration, and enhancing neovascularization. Consequently, the rate of VML repair is significantly improved. Our innovative piezoelectric elastomer enables simultaneous repair and real-time biofeedback monitoring of VML, offering a novel strategy for the treatment of volumetric muscle loss.

Development and functional validation of tarsometatarsal prosthesis

Assistive Technology (AT) plays a crucial role in providing aid products, including prostheses to persons with disabilities. Tarsometatarsal (TMT) disarticulation, a type of partial foot amputation, is associated with complex gait disorders. However, there is limited research on the functional impact of TMT prostheses on gait. This study aims to develop and functionally validate a 3D-printed TMT prosthesis using finite element analysis and human motion laboratory studies. A 65-year-old patient with TMT amputation participated. Digital models of the amputated and healthy feet were obtained through 3D scanning. The prosthesis design was created using Fusion 360 software. Finite element analysis validated the prosthesis design. The prosthesis was manufactured using thermofusion printing with a biocompatible thermoplastic elastomer material. Functional validation included walking, running, and the Timed Up and Go test using motion analysis technologies. Finite element analysis demonstrated the structural integrity and safety of the TMT prosthesis during propulsion. The manufacturing process resulted in an adjustable and cost-effective prosthesis. Functional validation revealed improvements in gait quality, symmetry, and spatiotemporal parameters with the prosthesis. Vertical ground reaction forces during walking resembled the normal range, and running performance showed increased symmetry and propulsion velocity. The Timed Up and Go test showed that prostheses reduce time and improve efficiency. The development and functional validation of the 3D-printed TMT prosthesis offer a promising solution for individuals with TMT disarticulation. This approach addresses the need for assistive technologies in low-income countries with limited access to prostheses. Advanced technologies and a patient-centred approach contribute to improving mobility, gait patterns, and overall quality of life for individuals with partial foot amputations. Future research will focus on exploring additional parameters and developing new prostheses to further enhance gait improvements.

Initial Clinical Experience With AneuFix Injectable Biocompatible Elastomer for Translumbar Embolization of Type 2 Endoleaks

The aim of this study was to assess the initial experience, technical success, and clinical benefit of AneuFix (TripleMed, Geleen, the Netherlands), a novel biocompatible and non-inflammatory elastomer that is directly injected into the aneurysm sac by a translumbar puncture in patients with a type II endoleak and a growing aneurysm. A multicenter, prospective, pivotal study was conducted (ClinicalTrials.gov:NCT02487290). Patients with a type II endoleak and aneurysm growth (>5 mm) were included. Patients with a patent inferior mesenteric artery connected to the endoleak were excluded for initial safety reasons. The endoleak cavity was translumbar punctured with cone-beam computed tomography (CT) and software guidance. Angiography of the endoleak was performed, all lumbar arteries connected to the endoleak were visualized, and AneuFix elastomer was injected into the endoleak cavity and short segment of the lumbar arteries. The primary endpoint was technical success, defined as successful filling of the endoleak cavity with computed tomography angiography (CTA) assessment within 24 hours. Secondary endpoints were clinical success defined as the absence of abdominal aortic aneurysm (AAA) growth at 6 months on CTA, serious adverse events, re-interventions, and neurological abnormalities. Computed tomography angiography follow-up was performed at 1 day and at 3, 6, and 12 months. This analysis reports the initial experience of the first 10 patients treated with AneuFix. Seven men and 3 women with a median age of 78 years (interquartile range (IQR), 74-84) were treated. Median aneurysm growth after endovascular aneurysm repair (EVAR) was 19 mm (IQR, 8-23 mm). Technical success was 100%; it was possible to puncture the endoleak cavity of all treated patients and to inject AneuFix. Clinical success at 6 months was 90%. One patient showed 5 mm growth with persisting endoleak, probably due to insufficient endoleak filling. No serious adverse events related to the procedure or AneuFix material were reported. No neurological disorders were reported. The first results of type II endoleak treatment with AneuFix injectable elastomer in a small number of patients with a growing aneurysm show that it is technically feasible, safe, and clinically effective at 6 months. Effective and durable embolization of type II endoleaks causing abdominal aortic aneurysms (AAA) growth after EVAR is challenging. A novel injectable elastic polymer (elastomer) was developed, specifically designed to treat type II endoleaks (AneuFix, TripleMed, Geleen, the Netherlands). Embolization of the type II endoleak was performed by translumbar puncture. The viscosity changes from paste-like during injection, into an elastic implant after curing. The initial experience of this multicentre prospective pivotal trial demonstrated that the procedure is feasible and safe with a technical success of 100%. Absence of AAA growth was observed in 9 out of 10 treated patients at 6 months.

An implantable ionic therapeutic platform for photodynamic therapy with wireless capacitive power transfer.

In this work, we describe the development of an implantable ionic device that can deliver a spatially targeted light source to tumor tissues in a controllable manner. The motivation behind our approach is to overcome certain limitations of conventional approaches where light is delivered from the outside of the body and only achieves low penetration depths. Also, to avoid the issues that come from the periodic need to replace the device's battery, we utilize a wireless power transfer system synchronized with light operation in an implantable structure. In our testing of this implanted, soft ionic, gel-based device that receives power wirelessly, we were able to clearly observe its capability to effectively deliver light in a harmonious and stable configuration to adjacent tissues. This approach reduces the mechanical inconsistencies seen in conventional systems that are induced by mismatches between the mechanical strength of conventional metallic components and that of biological tissues. The light delivering performance of our device was studied in depth under the various conditions set by adjusting the area of the gel receivers, the ion concentration and the ion types used in the gel components. The enhanced antitumor effects of our device were observed through in vitro cell tests, in comparison with treatments using the conventional approach of using direct light from outside the body. Full encapsulation using biocompatible elastomers enables our device to provide good functional stability, while implantation for about 3 weeks in the in vivo model showed the effective targeted photodynamic treatments made possible by our approach. Our advanced approach of designing the implantable platform based on ionic gel components allows us to iteratively irradiate a target with light whenever required, making the technology particularly suited to long-term treatment of residual tumors while facilitating further practical and clinical development.

3D printing a biocompatible elastomer for modeling muscle regeneration after volumetric muscle loss

Volumetric muscle loss (VML) injuries due to trauma, tumor ablation, or other degenerative muscle diseases are debilitating and currently have limited options for self-repair. Advancements in 3D printing allow for the rapid fabrication of biocompatible scaffolds with designer patterns. However, the materials chosen are often stiff or brittle, which is not optimal for muscle tissue engineering. This study utilized a photopolymerizable biocompatible elastomer – poly (glycerol sebacate) acrylate (PGSA) – to develop an in vitro model of muscle regeneration and proliferation into an acellular scaffold after VML injury. Mechanical properties of the scaffold were tuned by controlling light intensity during the 3D printing process to match the specific tension of skeletal muscle. The effect of both geometric (channel sizes between 300 and 600 μm) and biologic (decellularized muscle extracellular matrix (dECM)) cues on muscle progenitor cell infiltration, proliferation, organization, and maturation was evaluated in vitro using a near-infrared fluorescent protein (iRFP) transfected cell line to assess cells in the 3D scaffold. Larger channel sizes and dECM coating were found to enhance cell proliferation and maturation, while no discernable effect on cell alignment was observed. In addition, a pilot experiment was carried out to evaluate the regenerative capacity of this scaffold in vivo after a VML injury. Overall, this platform demonstrates a simple model to study muscle progenitor recruitment and differentiation into acellular scaffolds after VML repair.

Solvent-Free Production by Extrusion of Bio-Based Poly(glycerol-co-diacids) Sheets for the Development of Biocompatible and Electroconductive Elastomer Composites.

Faced with growing global demand for new potent, bio-based, biocompatible elastomers, the present study reports the solvent-free production of 13 pure and derived poly(glycerol-co-diacid) composite sheets exclusively using itaconic acid, sebacic acid, and 2,5-furandicarboxylic acid (FDCA) with glycerol. Herein, modified melt polycondensation and Co(II)-catalyzed polytransesterification were employed to produce all exploitable prepolymers, enabling the easy and rapid manufacturing of elastomer sheets by extrusion. Most of our samples were loaded with 4 wt% of various additives such as natural polysaccharides, synthetic polymers, and/or 25 wt% sodium chloride as porogen agents. The removal of unreacted monomers and acidic short oligomers was carried out by means of washing with NaHCO3 aqueous solution, and pH monitoring was conducted until efficient sheet surface neutralization. For each sheet, their surface morphologies were observed by Field-emission microscopy, and DSC was used to confirm their amorphous nature and the impact of the introduction of every additive. The chemical constitution of the materials was monitored by FTIR. Then, cytotoxicity tests were performed for six of our most promising candidates. Finally, we achieved the production of two different types of extrusion-made PGS elastomers loaded with 10 wt% PANI particulates and 4 wt% microcrystalline cellulose for adding potential electroconductivity and stability to the material, respectively. In a preliminary experiment, we showed the effectiveness of these materials as performant, time-dependent electric pH sensors when immersed in a persistent HCl atmosphere.

Magnetic soft robotic bladder for assisted urination.

The poor contractility of the detrusor muscle in underactive bladders (UABs) fails to increase the pressure inside the UAB, leading to strenuous and incomplete urination. However, existing therapeutic strategies by modulating/repairing detrusor muscles, e.g., neurostimulation and regenerative medicine, still have low efficacy and/or adverse effects. Here, we present an implantable magnetic soft robotic bladder (MRB) that can directly apply mechanical compression to the UAB to assist urination. Composed of a biocompatible elastomer composite with optimized magnetic domains, the MRB enables on-demand contraction of the UAB when actuated by magnetic fields. A representative MRB for a UAB in a porcine model is demonstrated, and MRB-assisted urination is validated by in situ computed tomography imaging after 14-day implantation. The urodynamic tests show a series of successful urination with a high pressure increase and fast urine flow. Our work paves the way for developing MRB to assist urination for humans with UABs.

A Skin‐Like Pressure‐ and Vibration‐Sensitive Tactile Sensor Based on Polyacrylamide/Silk Fibroin Elastomer

AbstractWith bio‐integrated electronics booming, stretchable, elastic, compliance, and biocompatible elastomers attract immense research interest due to their potential to integrate with electronic devices and soft tissues. In this work, a double network skin‐like elastomer based on hydrophobic‐polyacrylamide/silk fibroin (HSF) is synthesized. The addition of the fibroin in polyacrylamide hydrogel significantly improves its stretchability, resilience, and tear resistance. Specifically, the HSF elastomer demonstrates a tensile strain as high as 1000% with the corresponding tensile stress of 0.27 MPa and great resilience (550 cycles). Based on such HSF, a hybrid mechanoreceptor sensor is fabricated, which can simultaneously implement slow adaptive and fast adaptive pulses like human skin. This device realizes the detection of a variety of human movements such as joint movement, vocalization, or pulse and high‐frequency vibration signal recognition, which demonstrates its potential applications in bio‐integrated electronics.

Biodegradable Elastomers Enabling Thermoprocessing Below 100 °C.

Biodegradable and biocompatible elastomers are highly desirable for many biomedical applications. Here, we report synthesis and characterization of poly(ε-caprolactone)-co-poly(β-methyl-δ-valerolactone)-co-poly(ε-caprolactone) (PCL-PβMδVL-PCL) elastomers. These materials have strain to failure values greater than 1000%. Tensile set measurements according to an ASTM standard revealed a 98.24% strain recovery 10 min after the force was removed and complete strain recovery 40 min after the force was removed. The PβMδVL midblock is amorphous with a glass-transition temperature of -51 °C, and PCL end blocks are semicrystalline and have a melting temperature in the range of 52-55 °C. Due to their thermoplastic nature and the low melting temperature, these elastomers can be readily processed by printing, extrusion, or hot-pressing at 60 °C. Lysozyme, a model bioactive agent, was incorporated into a PCL-PβMδVL-PCL elastomer through melt blending in an extruder, and the blend was further hot-pressed into films; both processing steps were performed at 60 °C. No loss of lysozyme bioactivity was observed. PCL-PβMδVL-PCL elastomers are as cytocompatible as tissue culture polystyrene in supporting cell viability and cell growth, and they are degradable in aqueous environments through hydrolysis. The degradable, cytocompatible, elastomeric, and thermoplastic properties of PCL-PβMδVL-PCL polymers collectively render them potentially valuable for many applications in the biomedical field, such as medical devices and tissue engineering scaffolds.

Optimization of FDM 3D printing process parameters to produce haemodialysis curcumin-loaded vascular grafts

3D printing has provided a new prospective in the manufacturing of personalized medical implants, including fistulas for haemodialysis (HD). In the current study, an optimized fused modelling deposition (FDM) 3D printing method has been validated, for the first time, to obtain cylindrical shaped fistulas. Printing parameters were evaluated for the manufacturing of fistulas using blank and 0.25% curcumin-loaded filaments that were produced by hot melt extrusion (HME). Four different fistula types have been designed and characterized using a variety of physicochemical characterization methods. Each design was printed three times to demonstrate printing process accuracy considering outer and inner diameter, wall thickness, width, and length. A thermoplastic polyurethane (TPU) biocompatible elastomer was chosen, showing good mechanical properties with a high elastic modulus and maximum elongation, as well as stability at high temperatures with less than 0.8% of degradation at the range between 25 and 250 °C. Curcumin release profile has been evaluated in a saline buffer, obtaining a low release (12%) and demonstrating drug could continue release for a longer period, and for as long as grafts should remain in patient body. Possibility to produce drug-loaded grafts using one-step method as well as 3D printing process and TPU filaments containing curcumin printability has been demonstrated.Graphical abstract

Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

Material extrusion-based additive manufacturing, commonly referred to as 3D-printing, is regarded as the key technology to pave the way for personalised medical treatment. This study explores the technique’s potential in customising vaginal inserts with complex structures, so-called urethra pessaries. A novel, flawlessly 3D-printable and biocompatible polyester-based thermoplastic elastomer serves as the feedstock. Next to the smart selection of the 3D-printing parameters cross-sectional diameter and infill to tailor the pessary’s mechanical properties, we elaborate test methods accounting for its application-specific requirements for the first time. The key property, i.e. the force the pessary exerts on the urethra to relief symptoms of urinary incontinence, is reliably adjusted within a broad range, including that of the commercial injection-moulded silicone product. The pessaries do not change upon long-term exposure to vaginal fluid simulant and compression (in-vivo conditions), satisfying the needs of repeated pessary use. Importantly, the vast majority of the 3D-printed pessaries allows for self-insertion and self-removal without any induced pessary rupture. Summarising, 3D-printed pessaries are not only a reasonable alternative to the commercial products, but build the basis to effectively treat inhomogeneous patient groups. They make the simple but very effective pessary therapy finally accessible to every woman.

Binder Jetting of Custom Silicone Powder for Direct Three-Dimensional Printing of Maxillofacial Prostheses.

Recent advances in digital workflow have transformed clinician's ability to offer patient-specific devices for medical and dental applications. However, the digital workflow of patient-specific maxillofacial prostheses (MFP) remains incomplete, and several steps in the manufacturing process are still labor-intensive and are costly in both time and resources. Despite the high demand for direct digital MFP manufacturing, three-dimensional (3D) printing of colored silicone MFP is limited by the processing routes of medical-grade silicones and biocompatible elastomers. In this study, a binder jetting 3D printing process with polyvinyl butyral (PVB)-coated silicone powder was developed for direct 3D printing of MFP. Nanosilica-treated silicone powder was spray dried with PVB by controlling the Ohnesorge number and processing parameters. After printing, the interconnected pores were infused with silicone and hexamethyldisiloxane (HMDS) by pressure-vacuum sequential infiltration to produce the final parts. Particle size, coating composition, surface treatment, and infusion conditions influenced the mechanical properties of the 3D-printed preform, and of the final infiltrated structure. In addition to demonstrating the feasibility of using silicone powder-based 3D printing for MFP, these results can be used to inform the modifications required to accommodate the manufacturing of other biocompatible elastomeric materials.

Synthesis of oligotetramethylene oxides with terminal amino groups as curing agents for an epoxyurethane oligomer

Abstract A method for the synthesis of oligotetramethylene oxides with terminal amino groups is presented. Its use as a hardener for urethane-containing oligomers has been demonstrated. The diamines were synthesized by a two-stage method based on oligotetramethylene oxide diol. The compounds can be used for the production of non-toxic, biocompatible and biodegradable segmented urethane-containing elastomers. The oligotetramethylene oxide diol with an average molecular mass of 1008 was chosen as a typical precursor component. Its dibromide was formed using a quasi-phosphonium reagent in various solvents. The corresponding amine was obtained by high-pressure amination. The compounds have been identified by 1H and 13C NMR spectroscopy, IR spectroscopy, and elemental analysis.

Self-healing polyurethane-elastomer with mechanical tunability for multiple biomedical applications in vivo

The unique properties of self-healing materials hold great potential in the field of biomedical engineering. Although previous studies have focused on the design and synthesis of self-healing materials, their application in in vivo settings remains limited. Here, we design a series of biodegradable and biocompatible self-healing elastomers (SHEs) with tunable mechanical properties, and apply them to various disease models in vivo, in order to test their reparative potential in multiple tissues and at physiological conditions. We validate the effectiveness of SHEs as promising therapies for aortic aneurysm, nerve coaptation and bone immobilization in three animal models. The data presented here support the translation potential of SHEs in diverse settings, and pave the way for the development of self-healing materials in clinical contexts.