Transposase Binding Research Articles

AFM-based force spectroscopy unravels stepwise formation of the DNA transposition complex in the widespread Tn3 family mobile genetic elements.

Transposon Tn4430 belongs to a widespread family of bacterial transposons, the Tn3 family, which plays a prevalent role in the dissemination of antibiotic resistance among pathogens. Despite recent data on the structural architecture of the transposition complex, the molecular mechanisms underlying the replicative transposition of these elements are still poorly understood. Here, we use force-distance curve-based atomic force microscopy to probe the binding of the TnpA transposase of Tn4430 to DNA molecules containing one or two transposon ends and to extract the thermodynamic and kinetic parameters of transposition complex assembly. Comparing wild-type TnpA with previously isolated deregulated TnpA mutants supports a stepwise pathway for transposition complex formation and activation during which TnpA first binds as a dimer to a single transposon end and then undergoes a structural transition that enables it to bind the second end cooperatively and to become activated for transposition catalysis, the latter step occurring at a much faster rate for the TnpA mutants. Our study thus provides an unprecedented approach to probe the dynamic of a complex DNA processing machinery at the single-particle level.

Mobility of mPing and its associated elements is regulated by both internal and terminal sequences

BackgroundDNA transposable elements are mobilized by a “cut and paste” mechanism catalyzed by the binding of one or more transposase proteins to terminal inverted repeats (TIRs) to form a transpositional complex. Study of the rice genome indicates that the mPing element has experienced a recent burst in transposition compared to the closely related Ping and Pong elements. A previously developed yeast transposition assay allowed us to probe the role of both internal and terminal sequences in the mobilization of these elements.ResultsWe observed that mPing and a synthetic mPong element have significantly higher transposition efficiency than the related autonomous Ping and Pong elements. Systematic mutation of the internal sequences of both mPing and mPong identified multiple regions that promote or inhibit transposition. Simultaneous alteration of single bases on both mPing TIRs resulted in a significant reduction in transposition frequency, indicating that each base plays a role in efficient transposase binding. Testing chimeric mPing and mPong elements verified the important role of both the TIRs and internal regulatory regions. Previous experiments showed that the G at position 16, adjacent to the 5′ TIR, allows mPing to have higher mobility. Alteration of the 16th and 17th base from mPing’s 3′ end or replacement of the 3′ end with Pong 3′ sequences significantly increased transposition frequency.ConclusionsAs the transposase proteins were consistent throughout this study, we conclude that the observed transposition differences are due to the element sequences. The presence of sub-optimal internal regions and TIR bases supports a model in which transposable elements self-limit their activity to prevent host damage and detection by host regulatory mechanisms. Knowing the role of the TIRs, adjacent sub-TIRs, and internal regulatory sequences allows for the creation of hyperactive elements.

Structural basis of seamless excision and specific targeting by piggyBac transposase

The piggyBac DNA transposon is used widely in genome engineering applications. Unlike other transposons, its excision site can be precisely repaired without leaving footprints and it integrates specifically at TTAA tetranucleotides. We present cryo-EM structures of piggyBac transpososomes: a synaptic complex with hairpin DNA intermediates and a strand transfer complex capturing the integration step. The results show that the excised TTAA hairpin intermediate and the TTAA target adopt essentially identical conformations, providing a mechanistic link connecting the two unique properties of piggyBac. The transposase forms an asymmetric dimer in which the two central domains synapse the ends while two C-terminal domains form a separate dimer that contacts only one transposon end. In the strand transfer structure, target DNA is severely bent and the TTAA target is unpaired. In-cell data suggest that asymmetry promotes synaptic complex formation, and modifying ends with additional transposase binding sites stimulates activity.

Characterization of Herves‐like transposable elements (hATs) in Drosophila species and their evolutionary scenario

A monophyletic group of Drosophila hAT transposable elements, referred to as Herves-like, was characterized and found to be present in 46% of 57 screened Drosophila species. A remarkable characteristic of these elements is the presence of a long array of minisatellite repeats (MnRs) in both subterminal extremities of the elements. The copy number of these minisatellites was highly variable between and within populations. Twenty-three strains of Drosophila willistoni, covering its geographic distribution, were screened for polymorphism in the copy number of 5' MnRs, showing a variation from 7 to 20 repeat copies. These MnRs are well conserved among Drosophila species and probably function as transposase binding sequences, as provided by short subterminal repeats in other hAT elements. Miniature inverted repeat transposable elements were found in 27% of species carrying Herves-like elements. Phylogenetic analysis showed incongruences between transposable elements and species phylogenies, suggesting that at least four horizontal transfer events have occurred.

Regulated complex assembly safeguards the fidelity of Sleeping Beauty transposition.

The functional relevance of the inverted repeat structure (IR/DR) in a subgroup of the Tc1/mariner superfamily of transposons has been enigmatic. In contrast to mariner transposition, where a topological filter suppresses single-ended reactions, the IR/DR orchestrates a regulatory mechanism to enforce synapsis of the transposon ends before cleavage by the transposase occurs. This ordered assembly process shepherds primary transposase binding to the inner 12DRs (where cleavage does not occur), followed by capture of the 12DR of the other transposon end. This extra layer of regulation suppresses aberrant, potentially genotoxic recombination activities, and the mobilization of internally deleted copies in the IR/DR subgroup, including Sleeping Beauty (SB). In contrast, internally deleted sequences (MITEs) are preferred substrates of mariner transposition, and this process is associated with the emergence of Hsmar1-derived miRNA genes in the human genome. Translating IR/DR regulation to in vitro evolution yielded an SB transposon version with optimized substrate recognition (pT4). The ends of SB transposons excised by a K248A excision+/integration- transposase variant are processed by hairpin resolution, representing a link between phylogenetically, and mechanistically different recombination reactions, such as V(D)J recombination and transposition. Such variants generated by random mutation might stabilize transposon-host interactions or prepare the transposon for a horizontal transfer.

Copy-out-Paste-in Transposition of IS911: A Major Transposition Pathway.

IS911 has provided a powerful model for studying the transposition of members of a large class of transposable element: the IS3 family of bacterial Insertion Sequences (IS). These transpose by a Copy-out-Paste-in mechanism in which a double-strand IS circle transposition intermediate is generated from the donor site by replication and proceeds to integrate into a suitable double strand DNA target. This is perhaps one of the most common transposition mechanisms known to date. Copy-out-Paste-in transposition has been adopted by members of at least eight large IS families. This chapter details the different steps of the Copy-out-Paste-in mechanism involved in IS911 transposition. At a more biological level it also describes various aspects of regulation of the transposition process. These include transposase production by programmed translational frameshifting, transposase expression from the circular intermediate using a specialized promoter assembled at the circle junction and binding of the nascent transposase while it remains attached to the ribosome during translation (co-translational binding). This co-translational binding of the transposase to neighboring IS ends provides an explanation for the longstanding observation that transposases show a cis-preference for their activities.

Generation of Enterobacter sp. YSU auxotrophs using transposon mutagenesis.

Prototrophic bacteria grow on M-9 minimal salts medium supplemented with glucose (M-9 medium), which is used as a carbon and energy source. Auxotrophs can be generated using a transposome. The commercially available, Tn5-derived transposome used in this protocol consists of a linear segment of DNA containing an R6Kγ replication origin, a gene for kanamycin resistance and two mosaic sequence ends, which serve as transposase binding sites. The transposome, provided as a DNA/transposase protein complex, is introduced by electroporation into the prototrophic strain, Enterobacter sp. YSU, and randomly incorporates itself into this host's genome. Transformants are replica plated onto Luria-Bertani agar plates containing kanamycin, (LB-kan) and onto M-9 medium agar plates containing kanamycin (M-9-kan). The transformants that grow on LB-kan plates but not on M-9-kan plates are considered to be auxotrophs. Purified genomic DNA from an auxotroph is partially digested, ligated and transformed into a pir+ Escherichia coli (E. coli) strain. The R6Kγ replication origin allows the plasmid to replicate in pir+ E. coli strains, and the kanamycin resistance marker allows for plasmid selection. Each transformant possesses a new plasmid containing the transposon flanked by the interrupted chromosomal region. Sanger sequencing and the Basic Local Alignment Search Tool (BLAST) suggest a putative identity of the interrupted gene. There are three advantages to using this transposome mutagenesis strategy. First, it does not rely on the expression of a transposase gene by the host. Second, the transposome is introduced into the target host by electroporation, rather than by conjugation or by transduction and therefore is more efficient. Third, the R6Kγ replication origin makes it easy to identify the mutated gene which is partially recovered in a recombinant plasmid. This technique can be used to investigate the genes involved in other characteristics of Enterobacter sp. YSU or of a wider variety of bacterial strains.

Mutator-Like Elements with Multiple Long Terminal Inverted Repeats in Plants

Mutator-like transposable elements (MULEs) are widespread in plants and the majority have long terminal inverted repeats (TIRs), which distinguish them from other DNA transposons. It is known that the long TIRs of Mutator elements harbor transposase binding sites and promoters for transcription, indicating that the TIR sequence is critical for transposition and for expression of sequences between the TIRs. Here, we report the presence of MULEs with multiple TIRs mostly located in tandem. These elements are detected in the genomes of maize, tomato, rice, and Arabidopsis. Some of these elements are present in multiple copies, suggesting their mobility. For those elements that have amplified, sequence conservation was observed for both of the tandem TIRs. For one MULE family carrying a gene fragment, the elements with tandem TIRs are more prevalent than their counterparts with a single TIR. The successful amplification of this particular MULE demonstrates that MULEs with tandem TIRs are functional in both transposition and duplication of gene sequences.

The role of vertical and horizontal transfer in the evolution of Paris-like elements in drosophilid species

The transposable element (TE) Paris was described in a Drosophila virilis strain (virilis species group) as causing a hybrid dysgenesis with other mobile genetic elements. Since then, the element Paris has only been found in D. buzzatii, a species from the repleta group. In this study, we performed a search for Paris-like elements in 56 species of drosophilids to improve the knowledge about the distribution and evolution of this element. Paris-like elements were found in 30 species from the Drosophila genus, 15 species from the Drosophila subgenus and 15 species from the Sophophora subgenus. Analysis of the complete sequences obtained from the complete available Drosophila genomes has shown that there are putative active elements in five species (D. elegans, D. kikkawai, D. ananassae, D. pseudoobscura and D. mojavensis). The Paris-like elements showed an approximately 242-bp-long terminal inverted repeats in the 5' and 3' boundaries (called LIR: long inverted repeat), with two 28-bp-long direct repeats in each LIR. All potentially active elements presented degeneration in the internal region of terminal inverted repeat. Despite the degeneration of the LIR, the distance of 185bp between the direct repeats was always maintained. This conservation suggests that the spacing between direct repeats is important for transposase binding. The distribution analysis showed that these elements are widely distributed in other Drosophila groups beyond the virilis and repleta groups. The evolutionary analysis of Paris-like elements suggests that they were present as two subfamilies with the common ancestor of the Drosophila genus. Since then, these TEs have been primarily maintained by vertical transmission with some events of stochastic loss and horizontal transfer.

DNA binding activities of the Herves transposase from the mosquito Anopheles gambiae

BackgroundDetermining the mechanisms by which transposable elements move within a genome increases our understanding of how they can shape genome evolution. Class 2 transposable elements transpose via a 'cut-and-paste' mechanism mediated by a transposase that binds to sites at or near the ends of the transposon. Herves is a member of the hAT superfamily of class 2 transposons and was isolated from Anopheles gambiae, a medically important mosquito species that is the major vector of malaria in sub-Saharan Africa. Herves is transpositionally active and intact copies of it are found in field populations of A gambiae. In this study we report the binding activities of the Herves transposase to the sequences at the ends of the Herves transposon and compare these to other sequences recognized by hAT transposases isolated from other organisms.ResultsWe identified the specific DNA-binding sites of the Herves transposase. Active Herves transposase was purified using an Escherichia coli expression system and bound in a site-specific manner to the subterminal and terminal sequences of the left and right ends of the element, respectively, and also interacted with the right but not the left terminal inverted repeat. We identified a common subterminal DNA-binding motif (CG/AATTCAT) that is critical and sufficient for Herves transposase binding.ConclusionsThe Herves transposase binds specifically to a short motif located at both ends of the transposon but shows differential binding with respect to the left and right terminal inverted repeats. Despite similarities in the overall structures of hAT transposases, the regions to which they bind in their respective transposons differ in sequence ensuring the specificity of these enzymes to their respective transposon. The asymmetry with which the Herves terminal inverted repeats are bound by the transposase may indicate that these differ in their interactions with the enzyme.

In Vitro Recombination and Inverted Terminal Repeat Binding Activities of the Mcmar1 Transposase

The Mcmar1 mariner element (MLE) presents some intriguing features with two large, perfectly conserved, 355 bp inverted terminal repeats (ITRs) containing two 28 bp direct repeats (DRs). The presence of a complete ORF in Mcmar1 makes it possible to explore the transposition of this unusual MLE. Mcmar1 transposase (MCMAR1) was purified, and in vitro transposition assays showed that it is able to promote ITR-dependent DNA cleavages and recombination events, which correspond to plasmid fusions and transpositions with imprecise ends. Further analyses indicated that MCMAR1 is able to interact with the 355 bp ITR through two DRs: the EDR (external DR) is a high-affinity binding site for MCMAR1, whereas the IDR (internal DR) is a low-affinity binding site. The main complex detected within the EDR contained a transposase dimer and only one DNA molecule. We hypothesize that the inability of MCMAR1 to promote precise in vitro transposition events could be due to mutations in its ORF sequence or to the specific features of transposase binding to the ITR. Indeed, the ITR region spanning from EDR to IDR resembles a MITE and could be bent by specific host factors. This suggests that the assembly of the transposition complex is more complex than that of those involved in the mobility of the Mos1 and Himar1 mariner elements.

Mu Transposon Insertion Sites and Meiotic Recombination Events Co-Localize with Epigenetic Marks for Open Chromatin across the Maize Genome

The Mu transposon system of maize is highly active, with each of the ∼50–100 copies transposing on average once each generation. The approximately one dozen distinct Mu transposons contain highly similar ∼215 bp terminal inverted repeats (TIRs) and generate 9-bp target site duplications (TSDs) upon insertion. Using a novel genome walking strategy that uses these conserved TIRs as primer binding sites, Mu insertion sites were amplified from Mu stocks and sequenced via 454 technology. 94% of ∼965,000 reads carried Mu TIRs, demonstrating the specificity of this strategy. Among these TIRs, 21 novel Mu TIRs were discovered, revealing additional complexity of the Mu transposon system. The distribution of >40,000 non-redundant Mu insertion sites was strikingly non-uniform, such that rates increased in proportion to distance from the centromere. An identified putative Mu transposase binding consensus site does not explain this non-uniformity. An integrated genetic map containing more than 10,000 genetic markers was constructed and aligned to the sequence of the maize reference genome. Recombination rates (cM/Mb) are also strikingly non-uniform, with rates increasing in proportion to distance from the centromere. Mu insertion site frequencies are strongly correlated with recombination rates. Gene density does not fully explain the chromosomal distribution of Mu insertion and recombination sites, because pronounced preferences for the distal portion of chromosome are still observed even after accounting for gene density. The similarity of the distributions of Mu insertions and meiotic recombination sites suggests that common features, such as chromatin structure, are involved in site selection for both Mu insertion and meiotic recombination. The finding that Mu insertions and meiotic recombination sites both concentrate in genomic regions marked with epigenetic marks of open chromatin provides support for the hypothesis that open chromatin enhances rates of both Mu insertion and meiotic recombination.

Fis negatively affects binding of Tn4652 transposase by out-competing IHF from the left end of Tn4652

Transposition activity in bacteria is generally maintained at a low level. The activity of mobile DNA elements can be controlled by bacterially encoded global regulators. Regulation of transposition of Tn4652 in Pseudomonas putida is one such example. Activation of transposition of Tn4652 in starving bacteria requires the stationary-phase sigma factor RpoS and integration host factor (IHF). IHF plays a dual role in Tn4652 translocation by activating transcription of the transposase gene tnpA of the transposon and facilitating TnpA binding to the inverted repeats of the transposon. Our previous results have indicated that besides IHF some other P. putida-encoded global regulator(s) might bind to the ends of Tn4652 and regulate transposition activity. In this study, employing a DNase I footprint assay we have identified a binding site of P. putida Fis (factor for inversion stimulation) centred 135 bp inside the left end of Tn4652. Our results of gel mobility shift and DNase I footprint studies revealed that Fis out-competes IHF from the left end of Tn4652, thereby abolishing the binding of TnpA. Thus, the results obtained in this study indicate that the transposition of Tn4652 is regulated by the cellular amount of P. putida global regulators Fis and IHF.

Analysis of P Element Transposase Protein-DNA Interactions during the Early Stages of Transposition

P elements are a family of transposable elements found in Drosophila that move by using a cut-and-paste mechanism and that encode a transposase protein that uses GTP as a cofactor for transposition. Here we used atomic force microscopy to visualize the initial interaction of transposase protein with P element DNA. The transposase first binds to one of the two P element ends, in the presence or absence of GTP, prior to synapsis. In the absence of GTP, these complexes remain stable but do not proceed to synapsis. In the presence of GTP or nonhydrolyzable GTP analogs, synapsis happens rapidly, whereas DNA cleavage is slow. Both atomic force microscopy and standard biochemical methods have been used to show that the P element transposase exists as a pre-formed tetramer that initially binds to either one of the two P element ends in the absence of GTP prior to synapsis. This initial single end binding may explain some of the aberrant P element-induced rearrangements observed in vivo, such as hybrid end insertion. The allosteric effect of GTP in promoting synapsis by P element transposase may be to orient a second site-specific DNA binding domain in the tetramer allowing recognition of a second high affinity transposase-binding site at the other transposon end.

A Rice Tc1/Mariner-Like Element Transposes in Yeast

The Tc1/mariner transposable element superfamily is widely distributed in animal and plant genomes. However, no active plant element has been previously identified. Nearly identical copies of a rice (Oryza sativa) Tc1/mariner element called Osmar5 in the genome suggested potential activity. Previous studies revealed that Osmar5 encoded a protein that bound specifically to its own ends. In this report, we show that Osmar5 is an active transposable element by demonstrating that expression of its coding sequence in yeast promotes the excision of a nonautonomous Osmar5 element located in a reporter construct. Element excision produces transposon footprints, whereas element reinsertion occurs at TA dinucleotides that were either tightly linked or unlinked to the excision site. Several site-directed mutations in the transposase abolished activity, whereas mutations in the transposase binding site prevented transposition of the nonautonomous element from the reporter construct. This report of an active plant Tc1/mariner in yeast will provide a foundation for future comparative analyses of animal and plant elements in addition to making a new wide host range transposable element available for plant gene tagging.

Conservation of Palindromic and Mirror Motifs within Inverted Terminal Repeats of mariner-like Elements

The transposase of the mariner-like elements (MLEs) specifically binds as a dimer to the inverted terminal repeat of the transposon that encodes it. Two binding-motifs located within the inverted terminal sequences (ITR) are therefore recognized, as previously indicated, by biochemical data obtained with the Mos1 and Himar1 transposases. Here, we define the motifs that are involved in the binding of a MLE transposase to its ITR by analyzing the nucleic acid properties of the 5' and 3' ITR sequences from 45 MLEs, taking into account the fact that the transposase binds to the ITR, using its CRO binding domains and the general characteristics of the cro binding sites so far investigated. Our findings show that in all the MLE ITRs, the outer half was better conserved than the inner half. More interestingly, they allowed us to characterize conserved palindromic and mirror motifs specific to each "MLE species". The presence of the palindromic motifs was correlated to the binding of the transposase dimer, whereas the properties of the mirror motifs were shown to be responsible for the bend in each ITR that helps to stabilize transposase-ITR interactions.

193. Direct Comparison of Integration Efficiency and Stable Gene Expression Mediated by the Sleeping Beauty Transposon System and by the PhiC31 Phage Integrase System in Cultured Human Fibroblasts and in Various Stem Cell Targets

Top of pageAbstract Significant research efforts are directed toward achieving non-viral, DNA-mediated transfer and stable expression of genes in somatic cells for the treatment of diseases. Plasmid DNA has been successfully used to deliver genes into cells, but its usefulness is restricted by the inability to provide sustained expression. One alternative is to include components of an integrating system in the vector design. The Sleeping Beauty (SB) transposase and phiC31 integrase both bring about insertion of DNA sequences into the genomes of human cells, suggesting an alternative to viral transduction. Because each approach requires its own unique genetic elements and catalytic enzyme to mediate gene insertion into cellular chromosomes, we chose to directly compare the effectiveness of integration and stable expression using a two-component system that is internally controlled for the integrating sequence. The integrating vector (pKT2/NAG) consists of (i) a phiC31 integrase recognition site (attB), (ii) eF1-alpha regulated GFP expression unit, and (iii) neomycin resistance gene regulated by the PGK promoter, all flanked by (iv) T2 transposase binding sites (IR/DRs) separated by (v) a colE1 bacterial origin and kanR gene. Overexpression inhibition of the SB transposase suggests a potential limitation with respect to integration efficiency that can be achieved by this vector. To address this issue, we first studied the integrating efficiency of pKT2/NAG by evaluating the effect of the dose of the co-delivered enzyme-encoding plasmid on integration and stable gene expression as determined by G418-resistant colony formation and GFP fluorescence. In each case, pKT2/NAG (500 ng) was co-transfected with 150 ng, 500 ng, or 1500 ng of either CMV-regulated luciferase (pCMV-Luc), transposase (pCMV-SB), or integrase (pCMV-Int) expression plasmids into cultured human HT1080 cells. G418-resistant colony formation exceeded levels achieved by random integration (+ pCMV-Luc) at all tested concentrations of the SB transposase-encoding plasmid, with diminished efficiency at higher concentrations. The inverse relationship was observed for phiC31 integrase, where gene transfer improved as the concentration of pCMV-Int increased relative to pKT2/NAG. Drug-resistant clones have been isolated for studies into: (i) gene silencing by flow cytometric analysis of GFP fluorescence, (ii) insertional preference by cloning and sequencing vector::chromosome junctions, and (iii) insertion frequency by Southern analysis. We have also co-delivered both components into rat multipotent adult progenitor cells and found both systems to effectively mediate G418-resistant colony formation above background. Studies underway in mouse ES cells and in human CD34+ cells using this bifunctional approach will provide a broad assessment of the relative usefulness of these two major non-viral integrating systems for the purpose of ex vivo gene therapy applications in a range of human diseases.

Functional comparison of the transposition core machineries of phage Mu and Haemophilus influenzae Mu-like prophage Hin–Mu reveals interchangeable components

Bacteriophage Mu uses DNA transposition for propagation and is a model for transposition studies in general. Recent identification of Mu-like prophages within bacterial genomes offers new material for evolutionary and comparative functional studies. One such prophage, Hin–Mu of Haemophilus influenzae Rd, was studied for its transpositional properties. The components of its transposition core machinery, the encoded transposase (MuA Hin) and the transposase binding sites, were evaluated for functional properties by sequence comparisons and DNase I footprinting. Transpositional activity of Hin–Mu was examined by in vitro assays directly assessing the assembly and catalytic function of the transposition core machinery. The Hin–Mu components readily assembled catalytically competent protein–DNA complexes, transpososomes. Thus, Hin–Mu encodes a functional transposase and contains critical transposase binding sites. Despite marked sequence differences, components of the Hin–Mu and Mu transposition core machineries are partially interchangeable, reflecting both conservation and flexibility in the functionally important regions within the transpososome structure.

148. The Altered Binding Properties of Sleeping Beauty Transposase Hyperactive Mutants May Explain Their Enhanced Efficacy

Top of pageAbstract The Sleeping Beauty (SB) transposon system has been shown as an effective vector to mediate stable, long-term gene transfer. We have previously identified SB hyperactive mutants through an alanine scan of the DNA binding region of the transposase. In total, 96 single-substitution mutants were generated and those individual missense mutations leading to increased activity were combined to generate four hyperactive Sleeping Beauty (HSB) mutants. In this study, we have begun to delve into the mechanism behind the increased activity of these mutants by comparing the four HSB mutants and wild-type transposase for their ability to bind the DNA-recognition sites. Truncated (N123) derivatives of wild-type and hyperactive SB proteins were generated by in vitro transcription/translation and tested for their ability to bind to oligos corresponding to transposase binding sites in an electrophoretic mobility shift assay. Each SB transposon inverted repeat contains two transposase binding sites, an outer binding site (OBS) adjacent to the transposon boundary and an inner binding site (IBS) internally situated about 165bp from the OBS. We found that there was no change in the binding affinities of the hyperactive mutants versus wild-type for the IBS but that binding to the OBS was increased 2–4 fold. Our results in conjunction with previous work, where it was shown that simply increasing the binding affinity of the transposase at the transposon terminal end causes the abolishment of transposition (Cui et al, J Mol Biol, 1221–1235; 2002), suggest that the mechanisms underlying hyperactivity may be due to an enhanced ability of these mutants to form an active synaptic complex and we are in the process of investigating this possibility. We are also examining all of the single-substitution mutants to determine which individual residues contribute to increased binding affinity. Through these experiments we hope to gain additional insight into the mechanisms involved in transposase function which, in turn, will lead to further enhancement of SB as a tool for gene transfer.

Excision of Sleeping Beauty transposons: parameters and applications to gene therapy.

A major problem in gene therapy is the determination of the rates at which gene transfer has occurred. Our work has focused on applications of the Sleeping Beauty (SB) transposon system as a non-viral vector for gene therapy. Excision of a transposon from a donor molecule and its integration into a cellular chromosome are catalyzed by SB transposase. In this study, we used a plasmid-based excision assay to study the excision step of transposition. We used the excision assay to evaluate the importance of various sequences that border the sites of excision inside and outside the transposon in order to determine the most active sequences for transposition from a donor plasmid. These findings together with our previous results in transposase binding to the terminal repeats suggest that the sequences in the transposon-junction of SB are involved in steps subsequent to DNA binding but before excision, and that they may have a role in transposase-transposon interaction. We found that SB transposons leave characteristically different footprints at excision sites in different cell types, suggesting that alternative repair machineries operate in concert with transposition. Most importantly, we found that the rates of excision correlate with the rates of transposition. We used this finding to assess transposition in livers of mice that were injected with the SB transposon and transposase. The excision assay appears to be a relatively quick and easy method to optimize protocols for delivery of genes in SB transposons to mammalian chromosomes in living animals.