Binding Of Polymyxin B Research Articles

Lipid A in outer membrane vesicles shields bacteria from polymyxins.

The continuous emergence of multidrug-resistant bacterial pathogens poses a major global healthcare challenge, with Klebsiella pneumoniae being a prominent threat. We conducted a comprehensive study on K. pneumoniae's antibiotic resistance mechanisms, focusing on outer membrane vesicles (OMVs) and polymyxin, a last-resort antibiotic. Our research demonstrates that OMVs protect bacteria from polymyxins. OMVs derived from Polymyxin B (PB)-stressed K. pneumoniae exhibited heightened protective efficacy due to increased vesiculation, compared to OMVs from unstressed Klebsiella. OMVs also shield bacteria from different bacterial families. This was validated ex vivo and in vivo using precision cut lung slices (PCLS) and Galleria mellonella. In all models, OMVs protected K. pneumoniae from PB and reduced the associated stress response on protein level. We observed significant changes in the lipid composition of OMVs upon PB treatment, affecting their binding capacity to PB. The altered binding capacity of single OMVs from PB stressed K. pneumoniae could be linked to a reduction in the lipid A amount of their released vesicles. Although the amount of lipid A per vesicle is reduced, the overall increase in the number of vesicles results in an increased protection because the sum of lipid A and therefore PB binding sites have increased. This unravels the mechanism of the altered PB protective efficacy of OMVs from PB stressed K. pneumoniae compared to control OMVs. The lipid A-dependent protective effect against PB was confirmed in vitro using artificial vesicles. Moreover, artificial vesicles successfully protected Klebsiella from PB ex vivo and in vivo. The findings indicate that OMVs act as protective shields for bacteria by binding to polymyxins, effectively serving as decoys and preventing antibiotic interaction with the cell surface. Our findings provide valuable insights into the mechanisms underlying antibiotic cross-protection and offer potential avenues for the development of novel therapeutic interventions to address the escalating threat of multidrug-resistant bacterial infections.

Polymyxin B-Enriched Exogenous Lung Surfactant: Thermodynamics and Structure.

The use of an exogenous pulmonary surfactant (EPS) to deliver other relevant drugs to the lungs is a promising strategy for combined therapy. We evaluated the interaction of polymyxin B (PxB) with a clinically used EPS, the poractant alfa Curosurf (PSUR). The effect of PxB on the protein-free model system (MS) composed of four phospholipids (diC16:0PC/16:0-18:1PC/16:0-18:2PC/16:0-18:1PG) was examined in parallel to distinguish the specificity of the composition of PSUR. We used several experimental techniques (differential scanning calorimetry, small- and wide-angle X-ray scattering, small-angle neutron scattering, fluorescence spectroscopy, and electrophoretic light scattering) to characterize the binding of PxB to both EPS. Electrostatic interactions PxB-EPS are dominant. The results obtained support the concept of cationic PxB molecules lying on the surface of the PSUR bilayer, strengthening the multilamellar structure of PSUR as derived from SAXS and SANS. A protein-free MS mimics a natural EPS well but was found to be less resistant to penetration of PxB into the lipid bilayer. PxB does not affect the gel-to-fluid phase transition temperature, Tm, of PSUR, while Tm increased by ∼+ 2 °C in MS. The decrease of the thickness of the lipid bilayer (dL) of PSUR upon PxB binding is negligible. The hydrophobic tail of the PxB molecule does not penetrate the bilayer as derived from SANS data analysis and changes in lateral pressure monitored by excimer fluorescence at two depths of the hydrophobic region of the bilayer. Changes in dL of protein-free MS show a biphasic dependence on the adsorbed amount of PxB with a minimum close to the point of electroneutrality of the mixture. Our results do not discourage the concept of a combined treatment with PxB-enriched Curosurf. However, the amount of PxB must be carefully assessed (less than 5 wt % relative to the mass of the surfactant) to avoid inversion of the surface charge of the membrane.

Rapid and sensitive detection of gram-negative bacteria using surface-immobilized polymyxin B.

Although detection of gram-negative bacteria (GNB) in body fluids is important for clinical purpose, traditional gram staining and other recently developed methods have inherent limitations in terms of accuracy, sensitivity, and convenience. To overcome the weakness, this study proposed a method detecting GNB based on specific binding of polymyxin B (PMB) to lipopolysaccharides (LPS) of GNB. Fluorescent microscopy demonstrated that surface immobilized PMB using a silane coupling agent was possible to detect fluorescent signal produced by a single Escherichia coli (a model GNB) cell. Furthermore, the signal was selective enough to differentiate between GNB and gram-positive bacteria. The proposed method could detect three cells per ml within one hour, indicating the method was very sensitive and the sensing was rapid. These results suggest that highly multifold PMB binding on each GNB cell occurred, as millions of LPS are present on cell wall of a GNB cell. Importantly, the principle used in this study was realized in a microfluidic chip for a sample containing E. coli cells suspended in porcine plasma, demonstrating its potential application to practical uses. In conclusion, the proposed method was accurate, sensitive, and convenient for detecting GNB, and could be applied clinically.

Real-time monitoring of polymyxin B-sodium deoxycholate sulfate binding with immobilized human serum albumin by surface plasmon resonance

Polymyxin B (PMB) has a high protein binding capacity with human serum albumin (HSA), which is the dominant plasma protein. This study aims to evaluate the kinetic parameters to understand the binding of PMB and PMB-based sodium deoxycholate sulfate (SDCS) formulations with HSA by surface plasmon resonance. The kinetics of PMB presented the best fit with a two-state reaction model, wherein the conformational change occurred after binding. PMB interacted with HSA in a temperature and formulation-dependent manner. PMB-SDCS formulations provided lower HSA binding than PMB in all experiments. Circular dichroism spectra confirmed the secondary structure of HSA changes in a decreased α-helical content in PMB formulations. UV–visible spectra revealed the microenvironment of tryptophan-214 changes after incubation with PMB formulations. Also, three-dimensional fluorescence demonstrated that the maximum intensity of tryptophan-214 decreased and shifted. The vibrational frequency of Fourier-transform infrared spectroscopy confirmed the conformational changes in the secondary structure of HSA. Therefore, PMB formulated with SDCS affected the PMB binding to HSA. A lower protein binding with HSA from PMB-SDCS formulations was a result of shielding the positive charge of PMB by SDCS therefore higher unbound PMB is available at the target sites. From this work, the modification PMB binding with HSA would help in PMB formulation design and perhaps dose adjustment of PMB for suitable drug availability in clinical setting.

A method for characterizing the thermal stability and antimicrobial binding to Lipopolysaccharides of Gram-negative isogenic mutant strains

Isothermal Titration Calorimetry (ITC) is widely employed to assess antimicrobial affinity for lipopolysaccharide (LPS); nevertheless, experiments are usually limited to commercially available-LPS chemotypes. Herein we show a method that uses Differential Scanning Calorimetry (DSC) to characterize homogeneity artificial vesicles of LPS (LPS-V) extracted from isogenic mutant bacterial strains before analyzing the antimicrobial binding by ITC. This method allows us to characterize the differences in the Polymyxin-B binding and gel to crystalline liquid (β↔α) phase profiles of LPS-V made of LPS extracted from Escherichia coli isogenic mutant strains for the LPS biosynthesis pathway, allowing us to obtain the comparable data required for new antimicrobial discovery.A method for:•Obtaining LPS vesicles from isogenic mutant bacterial strains.•Characterize artificial LPS vesicles homogeneity.•Characterize antimicrobial binding to LPS.

Characterizing the effect of polymyxin B antibiotics to lipopolysaccharide on Escherichiacoli surface using atomic force microscopy.

Lipopolysaccharide (LPS) on gram-negative bacterial outer membranes is the first target for antimicrobial agents, due to their spatial proximity to outer environments of microorganisms. To develop antibacterial compounds with high specificity for LPS binding, the understanding of the molecular nature and their mode of recognition is of key importance. In this study, atomic force microscopy (AFM) and single molecular force spectroscopy were used to characterize the effects of antibiotic polymyxin B (PMB) to the bacterial membrane at the nanoscale. Isolated LPS layer and the intact bacterial membrane were examined with respect to morphological changes at different concentrations of PMB. Our results revealed that 3hours of 10μg/mL of PMB exposure caused the highest roughness changes on intact bacterial surfaces, arising from the direct binding of PMB to LPS on the bacterial membrane. Single molecular force spectroscopy was used to probe specific interaction forces between the isolated LPS layer and PMB coupled to the AFM tip. A short range interaction regime mediated by electrostatic forces was visible. Unbinding forces between isolated LPS and PMB were about 30pN at a retraction velocity of 500nm/s. We further investigated the effects of the polycationic peptide PMB on bacterial outer membranes and monitored its influences on the deterioration of the bacterial membrane structure. Polymyxin B binding led to rougher appearances and wrinkles on the outer membranes surface, which may finally lead to lethal membrane damage of bacteria. Our studies indicate the potential of AFM for applications in pathogen recognition and nano-resolution approaches in microbiology.

Low-dose polymyxin: an option for therapy of Gram-negative sepsis.

Endotoxins are the major components of the outer membrane of most Gram-negative bacteria and are one of the main targets in inflammatory diseases. The presence of endotoxins in blood can provoke septic shock in case of pronounced immune response. Here we show in vitro inactivation of endotoxins by polymyxin B (PMB). The inflammatory activity of the LPS–PMB complex in blood was examined in vitro in freshly drawn blood samples. Plasma protein binding of PMB was determined by ultracentrifugation using membranes with different molecular cut-offs, and PMB clearance during dialysis was calculated after in vitro experiments using the AV1000S filter. The formed LPS–PMB complex has lower inflammatory activity in blood, which results in highly reduced cytokine secretion. According to in vitro measurements, the appropriate plasma level of PMB for LPS inactivation is between 100 and 200 ng/ml. Furthermore, the combination of cytokine removal by adsorbent treatment with LPS inactivation by PMB dosage leads to strong suppression of inflammatory effects in blood in an in vitro model. Inactivation of endotoxins by low-dose intravenous PMB infusion or infusion into the extracorporeal circuit during blood purification can be applied to overcome the urgent need for endotoxin elimination not only in treatment of sepsis, but also in liver failure.

A two‐tier model of polymyxin B resistance in Burkholderia cenocepacia

Burkholderia cenocepacia is an environmental bacterium causing serious human opportunistic infections and is extremely resistant to multiple antibiotics including antimicrobial peptides, such as polymyxin B (PmB). Extreme antibiotic resistance is attributed to outer membrane impermeability ('intrinsic' resistance). Previous work showed that production of full-length lipopolysaccharide (LPS) prevents surface binding of PmB. We hypothesized that two tiers of resistance mechanisms rendering different thresholds of PmB resistance exist in B. cenocepacia. To test this notion, candidate genes were mutated in two isogenic strains expressing full-length LPS or truncated LPS devoid of heptose ('heptoseless LPS') respectively. We uncovered various proteins required for PmB resistance only in the strain with heptoseless LPS. These proteins are not involved in preventing PmB binding to whole cells or permeabilization of the outer membrane. Our results support a two-tier model of PmB resistance in B. cenocepacia. One tier sets a very high threshold mediated by the LPS and the outer membrane permeability barrier. The second tier sets a lower threshold that may play a role in PmB resistance only when outer membrane permeability is compromised. This model may be of general applicability to understanding the high antimicrobial peptide resistance of environmental opportunistic pathogens.

Biosynthesis and Structure of the Burkholderia cenocepacia K56-2 Lipopolysaccharide Core Oligosaccharide: TRUNCATION OF THE CORE OLIGOSACCHARIDE LEADS TO INCREASED BINDING AND SENSITIVITY TO POLYMYXIN B

Burkholderia cenocepacia is an opportunistic pathogen that displays a remarkably high resistance to antimicrobial peptides. We hypothesize that high resistance to antimicrobial peptides in these bacteria is because of the barrier properties of the outer membrane. Here we report the identification of genes for the biosynthesis of the core oligosaccharide (OS) moiety of the B. cenocepacia lipopolysaccharide. We constructed a panel of isogenic mutants with truncated core OS that facilitated functional gene assignments and the elucidation of the core OS structure in the prototypic strain K56-2. The core OS structure consists of three heptoses in the inner core region, 3-deoxy-d-manno-octulosonic acid, d-glycero-d-talo-octulosonic acid, and 4-amino-4-deoxy-l-arabinose linked to d-glycero-d-talo-octulosonic acid. Also, glucose is linked to heptose I, whereas heptose II carries a second glucose and a terminal heptose, which is the site of attachment of the O antigen. We established that the level of core truncation in the mutants was proportional to their increased in vitro sensitivity to polymyxin B (PmB). Binding assays using fluorescent 5-dimethylaminonaphthalene-1-sulfonyl-labeled PmB demonstrated a correlation between sensitivity and increased binding of PmB to intact cells. Also, the mutant producing a heptoseless core OS did not survive in macrophages as compared with the parental K56-2 strain. Together, our results demonstrate that a complete core OS is required for full PmB resistance in B. cenocepacia and that resistance is due, at least in part, to the ability of B. cenocepacia to prevent binding of the peptide to the bacterial cell envelope.

Thermodynamic Analysis of the Lipopolysaccharide-Dependent Resistance of Gram-Negative Bacteria against Polymyxin B

Cationic antimicrobial cationic peptides (CAMP) have been found in recent years to play a decisive role in hosts’ defense against microbial infection. They have also been investigated as a new therapeutic tool, necessary in particular due to the increasing resistance of microbiological populations to antibiotics. The structural basis of the activity of CAMPs has only partly been elucidated and may comprise quite different mechanism at the site of the bacterial cell membranes or in their cytoplasm. Polymyxin B (PMB) is a CAMP which is effective in particular against Gram-negative bacteria and has been well studied with the aim to understand its interaction with the outer membrane or isolated membrane components such as lipopolysaccharide (LPS) and to define the mechanism by which the peptides kill bacteria or neutralize LPS. Since PMB resistance of bacteria is a long-known phenomenon and is attributed to structural changes in the LPS moiety of the respective bacteria, we have performed a thermodynamic and biophysical analysis to get insights into the mechanisms of various LPS/PMB interactions in comparison to LPS from sensitive strains. In isothermal titration calorimetric (ITC) experiments considerable differences of PMB binding to sensitive and resistant LPS were found. For sensitive LPS the endothermic enthalpy change in the gel phase of the hydrocarbon chains converts into an exothermic reaction in the liquid crystalline phase. In contrast, for resistant LPS the binding enthalpy change remains endothermic in both phases. As infrared data show, these differences can be explained by steric changes in the headgroup region of the respective LPS.

Polymyxin B: An ode to an old antidote for endotoxic shock

Endotoxic shock, a syndrome characterized by deranged hemodynamics, coagulation abnormalities, and multiple system organ failure is caused by the release into the circulation of lipopolysaccharide (LPS), the structurally diverse component of Gram-negative bacterial outer membranes, and is responsible for 60% mortality in humans. Polymyxin B (PMB), a cyclic, cationic peptide antibiotic, neutralizes endotoxin but induces severe side effects in the process. The potent endotoxin neutralizing ability of PMB, however, offers possibilities for designing non-toxic therapeutic agents for combating endotoxicosis. Amongst the numerous approaches for combating endotoxic shock, peptide mediated neutralization of LPS seems to be the most attractive one. The precise mode of binding of PMB to LPS and the structural features involved therein have been elucidated only recently using a variety of biophysical approaches. These suggest that efficient neutralization of endotoxin by PMB is not achieved by mere binding to LPS but requires its sequestration from the membrane. Incorporation of this feature into the design of endotoxin neutralizing peptides should lead to the development of effective antidotes for endotoxic shock.

Binding specificity of polymyxin B, BPI, LALF, and anti-deep core/lipid a monoclonal antibody to lipopolysaccharide partial structures.

The deep core/lipid A (DCLA) region of gram-negative bacterial lipopolysaccharide (LPS) is common to most gram-negative pathogens and contains anionic phosphoryl groups plus numerous acyl chains as part of the toxic lipid A moiety. Several disparate agents that antagonize the effects of LPS exhibit extensive physicochemical similarities (hydrophobicity, cationic charge) within their binding domains. It is presumed that binding to the DCLA region by each of these antagonists-cross-reactive anti-LPS monoclonal antibodies (mAbs), polymyxin B (PmB), plus bactericidal permeability-increasing protein (BPI) and Limulus anti-LPS factor (LALF)-may be related to these properties. Therefore, we hypothesized that in addition to secondary and tertiary protein conformation, electrostatic interactions involving the negatively charged phosphoryl groups, hydrophobic interactions involving the acyl chains of lipid A, or both might be important factors that promote LPS antagonism. Binding of PmB, BPI, LALF, or anti-DCLA mAb 1B6 to Salmonella minnesota monophosphoryl lipid A (MPLA), diphosphoryl lipid A (DPLA), and Salmonella minnesota Re (which possess a common structural moiety, but vary considerably in structure and charge) was examined. Highly phosphorylated DNA and bovine serum albumin served as unrelated structural controls. BPI bound MPLA, which is hydrophobic and minimally charged, while mAb 1B6 bound anionic DNA; neither PmB nor LALF were reactive with MPLA or DNA. We surmised that hydrophobic interactions play a role in BPI binding to LPS, and although electrostatic interactions appear to be important for binding of mAb 1B6 to DCLA, they may not contribute to as great an extent for PmB, BPI, or LALF. Thus our data support the contention that the contribution of these specific physicochemical factors varies among endotoxin antagonists.

Polymyxin B binds to anandamide and inhibits its cytotoxic effect

Anandamide (ANA), an endogenous cannabinoid, can be generated by activated macrophages during endotoxin shock and is thought to be a paracrine contributor to hypotension. We discovered that ANA in saline/ethanol solution and in serum was efficiently adsorbed in a polymyxin B (PMB)-immobilized beads column and eluted with ethanol. We confirmed the direct binding of PMB to ANA by using surface plasmon resonance. The adsorption of ANA by PMB may abolish the diverse effects of ANA such as hypotension, immunosuppression, and cytotoxicity, and may suggest a new therapeutic strategy for endotoxin shock.

Thermodynamics and Structural Studies of the Interaction of Polymyxin B with Deep Rough Mutant Lipopolysaccharides

Deep rough mutant lipopolysaccharide (ReLPS) dissolved in aqueous solution spontaneously forms supramolecular structures which mainly consist of vesicles. Addition of Polymyxin B (PmB) to these ReLPS vesicles influence the shape of these structures as demonstrated here by electronmicroscopy and dynamic light scattering techniques. The main phase transition of the ReLPS is found at 21.3 ± 0.1°C for ReLPS fromEscherichia coliand at 24.0 ± 0.5°C for ReLPS fromSalmonella minnesotaby differential scanning calorimetry (DSC). Using isothermal differential titration calorimetry (ITC), the thermodynamic behavior of the interaction of PmB with ReLPS vesicles has been studied. The stoichiometric ratio for the binding of PmB to ReLPS was found to lie between 0.6 and 1, as determined from ITC and monolayer experiments. No phase transition was observed for ReLPS monolayers saturated with PmB. The results indicate specific interaction of PmB with ReLPS. We propose a two-step mechanism for this interaction, which involves electrostatic attraction between charged parts of the molecules and, in the second step, hydrophobic interactions between the nonpolar parts of both compounds.

Resistance of Serratia marcescens to polymyxin B: a comparative investigation of two S-form lipopolysaccharides obtained from a sensitive and a resistant variant of strain 111

Lipopolysaccharide (LPS) of the polymyxin B (PmB)-sensitive variant of Serratia marcescens smooth-type strain 111 (senLPS) binds significantly more PmB than that of the resistant variant (resLPS), following mild acid hydrolysis this difference is abolished. The main compositional differences between these strains are: (i) the amount of 4-amino-4-deoxy-arabinose (Ara4N); and (ii) the substitution patterns of the phosphate groups. ResLPS contains three times more Ara4N than senLPS, mainly phosphodiesters, whereas senLPS contains mainly (di)-phosphomonoesters. Thus, the senLPS, and the bacterial surface, contain a higher negative charge density. Mild acid hydrolysis decreases the PmB-binding capacity of senLPS and increases that of resLPS. The resulting change in LPS composition was a reduction in the amount of phosphate (about 40%) and a loss of nearly all the Ara4N residues, from both LPS. Mild alkaline hydrolysis removes Ara4N from both LPS, and the hydrolysate contains Ara4N-phosphate, but no Ara4N-(1 →8)-Kdo was detected. The results suggest that the 4'-phosphate of lipid A mediates the binding of PmB, whereas its substitution by Ara4N prevents it.

Titration calorimetric studies to elucidate the specificity of the interactions of polymyxin B with lipopolysaccharides and lipid A

Lipopolysaccharide (LPS), the major cell wall constituent of Gram-negative bacteria, evokes a multitude of biological effects in mammals including pyrogenicity and toxic shock syndrome. Polymyxin B (PmB), a polycationic cyclic peptide, is known to neutralize most of its activities. The nature of the interaction of PmB with LPS and lipid A was investigated by isothermal titration calorimetry. PmB binds to LPS as well as lipid A stoichiometrically and non-co-operatively with micromolar affinity. These interactions are driven primarily by a favourable change in entropy (delta S) and are endothermic in nature. These positive changes in enthalpies decrease with increasing temperature, yielding a heat capacity change, delta Cp, of -2385 J.mol-1.degree-1 for PmB-LPS interactions while the binding of PmB to lipid A displays a delta Cp of -2259 J.mol-1.degree-1. The negative heat capacity changes provide strong evidence for the role of hydrophobic interactions as the driving force for the association of PmB with LPS and lipid A. A correlation of the energetics of these interactions with analyses of the molecular models of PmB suggests that a cluster of solvent-exposed non-polar amino acid side-chains that line one surface of the molecule, together with a ring of positively charged residues on its other surface, are responsible for its strong and stoichiometric binding to LPS.

Increased phosphodiesters in lipopolysaccharide prepared from the polymyxin B-resistant isolate of Klebsiella pneumoniae.

A polymyxin B (PXB)-resistant mutant of Klebsiella pneumoniae O3 was isolated. Lipopolysaccharide (LPS) extracted from the PXB-resistant isolate bound little PXB, although LPS from the parental strain did. The 31P nuclear magnetic resonance (NMR) spectrum of PXB-resistant type LPS showed that it contained much less of the phosphomonoesters and the pyrophosphate esters, and an increased amount of the phosphodiesters, compared to the parental type LPS. The decrease in the binding of PXB might be due to altered phosphate groups on the PXB-resistant type LPS, suggesting that it might explain the PXB-resistance of the mutant.

Polymyxin B-horseradish peroxidase conjugates as tools in endotoxin research

The peptide antibiotic Polymyxin B (PMB) binds to bacterial endotoxin (lipopolysaccharide, LPS). We prepared covalent conjugates of PMB and horseradish peroxidase (HRP) by periodation of HRP-linked oligosaccharides followed by direct condensation with PMB. In addition we prepared monoclonal antibodies (Mabs) to PMB. The PMB-HRP conjugates and anti-PMB Mabs were used to study in ELISA the binding of PMB to LPS from Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa. In addition, PMB-HRP was used to quantify lipid A in ELISA, and to stain gramnegative bacteria histochemically. For the study of PMB-LPS interaction, PMB-HRP proved to be superior to the anti-PMB Mabs. PMB-HRP conjugates are useful general probes to detect or measure lipid A and LPS of various species using very simple methods and to stain bacteria, and they may obviate the need for many specific antisera. Thus, PMB-HRP conjugates are useful probes for endotoxin research.

Binding of Polymyxin B to Rat Alveolar Macrophages

The specific binding of radiolabeled polymyxin B (PmB) to rat alveolar macrophages was investigated. PmB retained its ability to inhibit lipopolysaccharide-induced tumor necrosis factor production by macrophages as long as one of five amino groups on PmB was unbound. Binding was saturable and temperature- and time-dependent, reaching steady state by 30 min at 37 degrees C and by 18 h at 4 degrees C. Macrophages had approximately 1.6 X 10(7) (Kd = 0.28 nM) PmB binding sites per cell. Lipid A had no appreciable effect on the number of sites. Binding did not occur to rat platelets, L929 fibroblast cells, a rat thymoma cell line, or precursor monocytic and myeloid cell lines. Precursor cells activated with 12-O-tetradecanoylphorbol-13-acetate acquired binding similar to that seen in alveolar macrophages, but L929 fibroblasts did not. Binding sites were sensitive to trypsin but not to phospholipase C. PmB may interact with specific binding sites involved in lipopolysaccharide-induced activation, production, or release of tumor necrosis factor by macrophages, inhibiting the effects of lipopolysaccharide on macrophages.

Comparison of monoclonal antibodies to the deeper core region of Gram-negative lipopolysaccharide by means of polymyxin B inhibition studies

Previously we have described a panel of 12 monoclonal antibodies (Mabs) directed to lipopolysaccharide (LPS) of the Salmonella minnesota Re mutant R595. Six of them had been found to decrease mortality of LPS for actinomycin D-sensitized mice. The other six clones were not effective. It is known and we have confirmed that polymyxin B (PMB) also neutralizes LPS endotoxicity. We now tested the hypothesis that protective clones bound near or at the PMB binding site, by an in vitro assay where PMB and Mab competed for binding to R595 LPS. Our results show that this hypothesis must be rejected and that the LPS epitopes recognized by protective clones are interspersed by those recognized by non-protective ones. We could, however, demonstrate that this sort of inhibition assays are of value in estimating the localization on the core of the binding sites of various Mabs.