Carbohydrate-binding Modules Binding Research Articles

Oriented display of cello-oligosaccharides for pull-down binding assays to distinguish binding preferences of glycan binding proteins

The production of biofuels from lignocellulosic biomass using carbohydrate-active enzymes like cellulases is key to a sustainable energy production. Understanding the adsorption mechanism of cellulases and associated binding domain proteins down to the molecular level details will help in the rational design of improved cellulases. In nature, carbohydrate-binding modules (CBMs) from families 17 and 28 often appear in tandem appended to the C-terminus of several endocellulases. Both CBMs are known to bind to the amorphous regions of cellulose non-competitively and show similar binding affinity towards soluble cello-oligosaccharides. Based on the available crystal structures, these CBMs may display a uni-directional binding preference towards cello-oligosaccharides (based on how the oligosaccharide was bound within the CBM binding cleft). However, molecular dynamics (MD) simulations have indicated no such clear preference. Considering that most soluble oligosaccharides are not always an ideal substrate surrogate to study the binding of CBMs to the native cell wall or cell surface displayed glycans, it is critical to use alternative reagents or substrates. To better understand the binding of type B CBMs towards smaller cello-oligosaccharides, we have developed a simple solid-state depletion or pull-down binding assay. Here, we specifically orient azido-labeled carbohydrates from the reducing end to alkyne-labeled micron-sized bead surfaces, using click chemistry, to mimic insoluble cell wall surface-displayed glycans. Our results reveal that both family 17 and 28 CBMs displayed a similar binding affinity towards cellohexaose-modified beads, but not cellopentaose-modified beads, which helps rationalize previously reported crystal structure and MD data. This may indicate a preferred uni-directional binding of specific CBMs and could explain their co-evolution as tandem constructs appended to endocellulases to increase amorphous cellulose substrate targeting efficiency. Overall, our proposed workflow can be easily translated to measure the affinity of glycan-binding proteins to click-chemistry based immobilized surface-displayed carbohydrates or antigens.

Reduced type-A carbohydrate-binding module interactions to cellulose I leads to improved endocellulase activity.

Dissociation of nonproductively bound cellulolytic enzymes from cellulose is hypothesized to be a key rate-limiting factor impeding cost-effective biomass conversion to fermentable sugars. However, the role of carbohydrate-binding modules (CBMs) in enabling nonproductive enzyme binding is not well understood. Here, we examine the subtle interplay of CBM binding and cellulose hydrolysis activity for three models type-A CBMs (Families 1, 3a, and 64) tethered to multifunctional endoglucanase (CelE) on two distinct cellulose allomorphs (i.e., cellulose I and III). We generated a smalllibrary of mutant CBMs with varying cellulose affinity, as determined by equilibrium binding assays, followed by monitoring cellulose hydrolysis activity of CelE-CBM fusion constructs. Finally, kinetic binding assays using quartz crystal microbalance with dissipationwere employed to measure CBM adsorption and desorption rate constants and , respectively, towards nanocrystalline cellulose derived from both allomorphs. Overall, our results indicate that reduced CBM equilibrium binding affinity towards cellulose I alone, resulting from increased desorption rates ( ) and reduced effective adsorption rates ( ), is correlated to overall improved endocellulase activity. Future studies could employ similar approaches to unravel the role of CBMs in nonproductive enzyme binding and develop improved cellulolytic enzymes for industrial applications.

Interaction of carbohydrate-binding modules with poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) is one of the most widely applied synthetic polymers, but its hydrophobicity is challenging for many industrial applications. Biotechnological modification of PET surface can be achieved by PET hydrolyzing cutinases. In order to increase the adsorption towards their unnatural substrate, the enzymes are fused to carbohydrate-binding modules (CBMs) leading to enhanced activity. In this study, we identified novel PET binding CBMs and characterized the CBM-PET interplay. We developed a semi-quantitative method to detect CBMs bound to PET films. Screening of eight CBMs from diverse families for PET binding revealed one CBM that possesses a high affinity towards PET. Molecular dynamics (MD) simulations of the CBM–PET interface revealed tryptophan residues forming an aromatic triad on the peptide surface. Their interaction with phenyl rings of PET is stabilized by additional hydrogen bonds formed between amino acids close to the aromatic triad. Furthermore, the ratio of hydrophobic to polar contacts at the interface was identified as an important feature determining the strength of PET binding of CBMs. The interaction of CBM tryptophan residues with PET was confirmed experimentally by tryptophan quenching measurements after addition of PET nanoparticles to CBM. Our findings are useful for engineering PET hydrolyzing enzymes and may also find applications in functionalization of PET.

Carbohydrate binding modules enhance cellulose enzymatic hydrolysis by increasing access of cellulases to the substrate

Plant biomass is a low-cost and abundant source of carbohydrates for production of fuels, “green” chemicals and materials. Currently, biochemical conversion of the biomass into sugars via enzymatic hydrolysis is the most viable technology. Here, the role of carbohydrate binding modules (CBMs) in the disruption of insoluble polysaccharide structures and their capacity to enhance cellulase-promoted lignocellulosic biomass hydrolysis was investigated. We show that CBM addition promotes generation of additional reducing ends in the insoluble substrate by cellulases. On the contrary, bovine serum albumin (BSA), widely used in prevention of a non-specific protein binding, causes an increase in soluble reducing-end production, when applied jointly with cellulases. We demonstrate that binding of CBMs to cellulose is non-homogeneous, irreversible and leads to its amorphisation. Our results also reveal effects of CBM-promoted amorphogenesis on cellulose hydrolysis by cellulases.

Lipopeptide produced from Bacillus sp. W112 improves the hydrolysis of lignocellulose by specifically reducing non-productive binding of cellulases with and without CBMs

BackgroundSurfactants have attracted increasing interest for their capability to improve the enzymatic hydrolysis of lignocellulosic biomass. Compared to chemical surfactants, biosurfactants have a broader prospect for industrial applications because they are more environmentally friendly and more effective in some researches. Commercial cellulase preparations are mainly composed of endoglucanases (EGs) and cellobiohydrolases (CBHs) that possess carbohydrate-binding modules (CBMs). However, the effects of lipopeptide-type biosurfactants on enzymatic saccharification of lignocellulose and adsorption behaviors of cellulases with CBMs remain unclear.ResultsIn this study, we found that Bacillus sp. W112 could produce a lipopeptide-type biosurfactant from untreated biomass, such as wheat bran and Jerusalem artichoke tuber. The lipopeptide could enhance the enzymatic hydrolysis of dilute acid pretreated Giant Juncao grass (DA-GJG) by fungal and bacterial enzymes. The enhancement increased over a range of temperatures from 30 to 50 °C. Lipopeptide was shown to be more effective in promoting DA-GJG saccharification than chemical surfactants at low dosages, with a best stimulatory degree of 20.8% at 2% loading of the substrates (w/w). Lipopeptide increased the thermostability of EG and CBH in commercial cellulase cocktails. Moreover, the dual effects of lipopeptide on the adsorption behaviors of cellulases were found. It specifically lowered the non-productive binding of cellulases to lignin and increased the binding of cellulases to cellulose. In addition, we investigated the influence of lipopeptide on the adsorption behaviors of CBHs with CBMs for the first time. Our results showed that lipopeptide reduced the adsorption of CBM-deleted CBH to DA-GJG to a greater extent than that of intact CBH while the non-productive binding of intact CBH to lignin was reduced more, indicating that lipopeptide decreased the binding of CBMs onto lignin but not their combination with cellulose.ConclusionsIn this study, we found that lipopeptide from Bacillus sp. W112 promoted the enzymatic hydrolysis of DA-GJG at relative low loadings. The stimulatory effect could be attributed to increasing the cellulase thermostability, reducing non-productive adsorption of cellulases with CBMs caused by lignin and enhancing the binding of cellulases to cellulose.

Computational Investigation of Glycosylation Effects on a Family 1 Carbohydrate-binding Module

Carbohydrate-binding modules (CBMs) are ubiquitous components of glycoside hydrolases, which degrade polysaccharides in nature. CBMs target specific polysaccharides, and CBM binding affinity to cellulose is known to be proportional to cellulase activity, such that increasing binding affinity is an important component of performance improvement. To ascertain the impact of protein and glycan engineering on CBM binding, we use molecular simulation to quantify cellulose binding of a natively glycosylated Family 1 CBM. To validate our approach, we first examine aromatic-carbohydrate interactions on binding, and our predictions are consistent with previous experiments, showing that a tyrosine to tryptophan mutation yields a 2-fold improvement in binding affinity. We then demonstrate that enhanced binding of 3-6-fold over a nonglycosylated CBM is achieved by the addition of a single, native mannose or a mannose dimer, respectively, which has not been considered previously. Furthermore, we show that the addition of a single, artificial glycan on the anterior of the CBM, with the native, posterior glycans also present, can have a dramatic impact on binding affinity in our model, increasing it up to 140-fold relative to the nonglycosylated CBM. These results suggest new directions in protein engineering, in that modifying glycosylation patterns via heterologous expression, manipulation of culture conditions, or introduction of artificial glycosylation sites, can alter CBM binding affinity to carbohydrates and may thus be a general strategy to enhance cellulase performance. Our results also suggest that CBM binding studies should consider the effects of glycosylation on binding and function.

In Situ Imaging of Single Carbohydrate-Binding Modules on Cellulose Microfibrils

The low efficiency of enzymes used in the bioprocessing of biomass for biofuels is one of the primary bottlenecks that must be overcome to make lignocellulosic biofuels cost-competitive. One of the rate-limiting factors is the accessibility of the cellulase enzymes to insoluble cellulolytic substrates, facilitated by surface absorption of the carbohydrate-binding modules (CBMs), a component of most cellulase systems. Despite their importance, reports of direct observation of CBM function and activity using microscopic methods are still uncommon. Here, we examine the site-specific binding of individual CBMs to crystalline cellulose in an aqueous environment, using the single molecule fluorescence method known as Defocused Orientation and Position Imaging (DOPI). Systematic orientations were observed that are consistent with the CBMs binding to the two opposite hydrophobic faces of the cellulose microfibril, with a well-defined orientation relative to the fiber axis. The approach provides in situ physical evidence indicating the CBMs bind with a well-defined orientation on those planes, thus supporting a binding mechanism driven by chemical and structural recognition of the cellulose surface.

Analysis of the Structural and Functional Diversity of Plant Cell Wall Specific Family 6 Carbohydrate Binding Modules

Carbohydrate binding modules (CBMs) play important biological roles in targeting appended catalytic modules to their dedicated substrate(s) within complex macromolecular structures such as the plant cell wall. Because of the large potential in ligand diversity within nature and our continually expanding knowledge of sequence-based information of carbohydrate-modifying enzymes, empirical determination of CBM binding specificity and identification of novel mechanisms in carbohydrate recognition by these proteins have become time-consuming and complicated processes. To help overcome these experimental hurdles, we present here a predictive model for family 6 CBMs (CBM6) that is based upon several factors, including phylogenetic relatedness, and structural and functional evidence. This analysis has determined that five regions within the binding site, termed A-E, play key roles in ligand selection and affinity. Regions A-C are located in a primary subsite and contribute mainly to binding energy and selection for O2, O3, and O4 equatorial hydroxyls. Region D appears to determine whether the CBM will interact with internal or terminal structures of the carbohydrate ligand. Region E displays the largest degree of variation and is thus predicted to make the most significant contribution to specificity. This model is supported by the biochemical properties and structure of a CBM6 from Clostridium cellulolyticum (CcCBM6), which we also report here. The protein bound specifically to xylose and the nonreducing of end of polymers containing this pentose sugar. The crystal structure of CcCBM6 in complex with xylose showed that a tyrosine residue made hydrophobic contacts with the unsubstituted C5 atom of xylose and sterically hindered decorations at this sugar ring position. The mechanism, by which the CBM recognizes xylose but not glucose, a specificity not previously observed in this family, supports our predictive model that holds that variation in region E plays a key role in the diverse ligand selection evident in CBM6.

Glycoside hydrolase carbohydrate-binding modules as molecular probes for the analysis of plant cell wall polymers

Novel molecular probes have been developed for the analysis and detection of polysaccharides in plant cell walls using carbohydrate-binding modules (CBMs) derived from modular glycoside hydrolases belonging to families 2a, 6, and 29. Recombinant forms of these proteins containing his-tags, in conjunction with anti-his-tag detection, provide a flexible system that utilizes CBMs as molecular probes in a range of applications. Assays for the rapid analysis of the binding of CBMs to polysaccharides and oligosaccharides using nitrocellulose-based CBM macroarrays and microtiter plate-based CBM capture and competitive-inhibition assays are described. We also demonstrate the use of CBMs with his-tags for the localization of their target ligands in planta. The generation of molecular probes from other families of CBMs will dramatically increase the repertoire of molecular probes available to determine the developmental and functional aspects of plant cell walls.