Benzyl Research Articles

Green Solvent γ-Valerolactone (GVL) Facilitates Photocatalytic C-H Bond Activation.

Solvents can significantly influence chemical reactions in condensed phases. Their critical properties are increasingly recognized in various research domains such as organic synthesis and biomass valorization. However, in semiconductor photocatalysis, solvents are primarily viewed as mediums for dissolving and diffusing substances, with their potential beneficial effects on photocatalytic conversions often overlooked. Additionally, common photocatalysis solvents like acetonitrile (ACN) pose serious safety and environmental concerns. In this study, we demonstrate that novel and safe green solvents, such as γ-valerolactone (GVL), can significantly enhance the performance of semiconductor photocatalysis for C-H bond activation. Non-specific solvent-solute interactions are the primary contributors to increased photocatalytic activity in the self-coupling of benzylic compounds. Specifically, GVL's large dielectric constant and high refractive index lower the energy barrier for the rate-determining C-H bond activation step, facilitating a faster coupling reaction. The versatility of GVL is further demonstrated in reactions with multiple reagents and in various oxidation and reduction photocatalytic systems beyond classic C-H bond activation. This work not only pioneers the use of green solvents but also provides comprehensive insights for proper solvent selection in semiconductor photocatalysis.

Green Solvent γ‐Valerolactone (GVL) Facilitates Photocatalytic C−H Bond Activation

AbstractSolvents can significantly influence chemical reactions in condensed phases. Their critical properties are increasingly recognized in various research domains such as organic synthesis and biomass valorization. However, in semiconductor photocatalysis, solvents are primarily viewed as mediums for dissolving and diffusing substances, with their potential beneficial effects on photocatalytic conversions often overlooked. Additionally, common photocatalysis solvents like acetonitrile (ACN) pose serious safety and environmental concerns. In this study, we demonstrate that novel and safe green solvents, such as γ‐valerolactone (GVL), can significantly enhance the performance of semiconductor photocatalysis for C−H bond activation. Non‐specific solvent‐solute interactions are the primary contributors to increased photocatalytic activity in the self‐coupling of benzylic compounds. Specifically, GVL′s large dielectric constant and high refractive index lower the energy barrier for the rate‐determining C−H bond activation step, facilitating a faster coupling reaction. The versatility of GVL is further demonstrated in reactions with multiple reagents and in various oxidation and reduction photocatalytic systems beyond classic C−H bond activation. This work not only pioneers the use of green solvents but also provides comprehensive insights for proper solvent selection in semiconductor photocatalysis.

CdS Quantum Dot Gels as a Direct Hydrogen Atom Transfer Photocatalyst for C-H Activation.

Here, we report CdS quantum dot (QD) gels, a three-dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d-HAT) photocatalyst for C-H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α-amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C-H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C-H bonds are activated by the photoexcited CdS QD gel via a d-HAT mechanism. This d-HAT mechanism is supported by the linear correlation between the logarithm of the C-H bond activation rate constant and the C-H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C-H activation.

CdS Quantum Dot Gels as a Direct Hydrogen Atom Transfer Photocatalyst for C−H Activation

AbstractHere, we report CdS quantum dot (QD) gels, a three‐dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d‐HAT) photocatalyst for C−H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α‐amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C−H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C−H bonds are activated by the photoexcited CdS QD gel via a d‐HAT mechanism. This d‐HAT mechanism is supported by the linear correlation between the logarithm of the C−H bond activation rate constant and the C−H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C−H activation.

A Multi-response Nonlinear Programming Model with an Inscribed Design to Optimize Bioreduction Conditions of (S)-phenyl (pyridin-2-yl)methanol by Leuconostoc pseudomesenteroides N13

AbstractAsymmetric bioreductions have the potential to synthesize chiral alcohols when catalyzed by biocatalysts. Nevertheless, the (S)-phenyl (pyridin-2-yl)methanol ((S)-2) analgesic synthesis poses significant challenges concerning unsatisfactory substrate amount and production method. Thus, this study proposes an inscribed design-focused multi-response nonlinear optimization model for the asymmetric reduction of the phenyl(pyridin-2-yl)methanone (1) with Leuconostoc pseudomesenteroides N13 biocatalyst. From the novel inscribed design-focused multi-response nonlinear optimization model, optimization conditions of the reaction, such as pH = 6, temperature = 29 °C, incubation time = 53 h, and agitation speed = 153 rpm, were found. Also, the reaction conversion was predicted to be 99%, and the product of the enantiomeric excess (ee) was 98.4% under the obtained optimization conditions. (S)-2 was obtained with 99% ee, 99% conversion, and 98% yield while performing a validation experiment using the determined optimized conditions. In addition, 1 with the amount of 11.9 g was converted entirely to (S)-2 (11.79 g, 98% isolated yield) on a high gram scale. Also, this study is noted as the first example of the gram-scale production of (S)-2 using an optimization strategy and biocatalyst. Further, the applicability of the inscribed design-focused optimization model in biocatalytic reactions has been demonstrated and provides an effective process for the analgesic synthesis of (S)-2, which is a green, cost-effective method of producing chiral aryl heteroaryl methanol.

KOtBu/DMF-Mediated Hydroalkylation of Alkenes via Benzylic C-H Bond Activation.

Catalytic hydroalkylation reaction of alkenes with benzylic hydrocarbons involving t-BuOK/DMF-mediated benzylic C-H bond activation is demonstrated. This direct and operational simple protocol affords a rapid and reliable access to a wide scope of benzylic compounds in good-to-excellent yields. The benzylic C-H's of either activated diarylmethanes (pKa ∼ 32.2) and benzyl thioethers (pKa ∼ 30.8) or inert alkylbenzenes could all act as useful synthetic platforms to be conveniently alkylated under mild reaction conditions.

Boosting Solvent-Free Aerobic Oxidation of Benzylic Compounds into Ketones over Au-Pd Nanoparticles Supported by Porous Carbon

The exploitation of highly efficient solvent-free catalytic systems for the selective aerobic oxidation of benzylic compounds to produce corresponding ketones with molecular oxygen under mild conditions remains a great challenge in the chemical industry. In this work, Au-Pd nanoparticles supported on porous carbon catalysts were fabricated by the borax-mediated hydrothermal carbonization method and the chemical reduction method. The physicochemical properties of Au-Pd bimetallic samples were examined by XRD, N2 sorption, SEM, TEM, and XPS techniques. The Au-Pd nanoparticles have successfully immobilized on the spherical carbon support with a porous structure and large surface area. A solvent-free catalytic oxidation system was constructed to selectively convert indane into indanone with Au-Pd nanocatalysts and O2. In contrast with a monometallic Au or Pd catalyst, the resulting bimetallic Au-Pd catalyst could effectively activate O2 and exhibit improved catalytic activity in the controlled oxidation of indane into indanone under 1 bar O2. A total of 78% conversion and >99% selectivity toward indanone can be achieved under optimized conditions. The synergistic effect of Au and Pd and porous carbon support contributed to the high catalytic activity for aerobic benzylic compound oxidation. This work offers a promising application prospect of efficient and recyclable Au-Pd nanocatalysts in functional benzylic ketone production.

ChlOR, a GMC family oxidoreductase that evolved independently from the actinomycete, confers resistance to amphenicol antibiotics.

Overuse of the amphenicol antibiotics chloramphenicol (CHL) and thiamphenicol (TAP) poses a great threat to ecosystem safety and human health. The strain, Nocardioides sp. LMS-CY, Nocardioides sp. QY071 and Nocardioides sp. L-11A, classified as a gram-positive actinomycete, harbours a complete CHL metabolic pathway. However, the metabolic genes (clusters) involved in the entire pathway in gram-positive actinomycetes are still limited. Here, chlORLMS , chlORQY071 and chlORL-11A completely from the actinomycete Nocardioides spp. were found to act on the C1 -OH of the CHL/TAP side chain, directly converting CHL/TAP to 4-nitrobenzaldehyde (PNBD)/4-methylsulfonyl benzaldehyde (PMBD) and transforming PNBD/PMBD into 4-nitrobenzyl alcohol (PNBM)/4-methylsulfonyl phenyl methanol (PMBM). Furthermore, oxidoreductases can transform PNBM into 4-nitrobenzoate (PNBA). The oxidoreductases ChlORLMS , ChlORQY071 and ChlORL-11A were all classified as cellobiose dehydrogenases from the glucose methanol choline (GMC) family. Based on the Swiss-Prot database, ChlORQY071 exhibited a lower identity (27.12%-35.10% similarity) with the reported oxidoreductases. Enzymatic and molecular docking analyses showed that ChlORQY071 and ChlORL-11A from the two similar genomes were remarkably more effective in metabolizing CHL than ChlORLMS . Overall, the detailed resistance mechanism of CHL/TAP by actinomycete strains isolated from soil and livestock manure will provide insights into the occurrence of CHL/TAP resistance genes in the environment, resistance risk and bioremediation of CHL/TAP-contaminated environments.

Modified distance optimization method for the asymmetric bioreduction conditions of phenyl(thiophen-2-yl)methanone by Weissella paramesenteroides N7

Chirality plays a significant part in life since it is closely linked to carrying out the many metabolic processes that make up a living being. Chiral secondary alcohols such as diaryl-, aryl heteroaryl-, and diheteroaryl are employed in pharmaceuticals as drug intermediates. Although biocatalytic asymmetric reduction of prochiral ketones containing aromatic and heteroaromatic groups is widely known, biocatalytic reduction of heteroaromatic prochiral ketones containing sulfur heteroatoms is rarely known. Very few studies exist in the literature, including the biocatalytic reduction of phenyl(thiophen-2-yl)methanone (1). Moreover, the biocatalytic reduction of 1 with a mathematical modelling and optimization technique is unknown until now. In this study, Weissella paramesenteroides N7 biocatalyst for the asymmetric bioreduction of 1 using a novel modified distance optimization method. Optimization conditions were found as pH = 6.46, temperature = 26 °C, incubation period = 71 h, agitation speed = 200 rpm by the modified distance optimization method, and it was determined that the conversion and enantiomeric excess (ee) under these conditions could be 98.7% and 98%, respectively. Under these proposed optimization conditions, (S)-phenyl(thiophen-2-yl)methanol ((S)-2) was obtained with >99% ee, >99% conversion, and 97% yield. In addition, 11.29 g of 1 was completely converted into (S)-2 (11.07 g, 97% isolated yield) under optimized conditions. This is the first report about the fabrication of enantiopure (S)-2 in high gram scale using a biocatalyst and a novel modified distance optimization technique. In this study, the successful applicability of the new modified distance optimization method in biocatalytic asymmetric reduction reactions has been successfully demonstrated.

Regiospecific and Enantiospecific Effects of the β-Benzyl-α-benzylidene-γ-butyrolactone Structure on Phytotoxic Fungi

Novel derivatives of E-β-benzyl-α-benzylidene-γ-butyrolactone (3-benzyl-2-benzylidene-4-butanolide) with lignano-9,9'-lactone structures were developed as anti-phytopathogenic fungal compounds. Their regiospecific and enantiospecific characteristics were determined, with the E-form and 3R-configuration showing higher activities against the Alternaria alternata Japanese pear pathotype. By the syntheses of benzyl compounds instead of benzylidene and aromatic derivatives, followed by an bioassay experiment, the importance of the benzylidene structure and effects of the substituents of the aromatic ring were clarified. The (2-OCH3, 4'-CH3/4'-CF3)-derivatives, 19 and 25, and (2-OCH3, 6-CH3/6-F/6-Br, 4'-OCH3)-derivatives, 34, 38, and 42, were more effective with EC50 values of 0.1-0.3 μM. It was assumed that the 2-OCH3 group, a hydrophobic group at the 6-position, and some size of the hydrophobic group at the 4'-position were necessary for the increased activity.

Enantioselective Ir-Catalyzed Hydrogenation of Terminal Homoallyl Sulfones: Total Synthesis of (-)-Curcumene.

A novel methodology for the preparation of chiral methyl benzylic compounds is reported. Terminal homoallyl sulfones were prepared from homoallyl alcohols, which are easily accessible through the recently reported Lewis acid isomerization of oxetanes. The iridium-catalyzed asymmetric hydrogenation of homoallylic sulfones afforded γ-chiral sulfones with excellent enantioselectivities (up to 98% ee). The synthetic potential of this novel methodology was demonstrated by the total synthesis of (R)-(-)-curcumene.

Impact of the coffee berry borer on the volatile and semi-volatile compounds; qualitative profile of Coffea arabica berries

One of the main attributes that highlight the final quality of a gourmet cup of coffee is its aroma. Aromas vary according to a variety of plant and environmental variables, among others. This study aimed to characterize volatile and semivolatile compounds according to the Coffee arabica "Limani" berries ripening stages (healthy and brocaded). The study used different extraction methodologies to capture the broad spectrum of volatile, semivolatile organic compounds in coffee berries and berry borer (CBB). The methodologies used in the study included: enfleurage, headspace SPME (solid-phase microextraction), absorbent trap, and direct immersion SPME. Our study generated a Profile for coffee berries and CBB w with 228 compounds. Esters, cyclic, and benzyl compounds represent 65.6% of the total. The first three types of compounds that most attract our sense of smell constitute 40.5% of the compounds found; 1.3% aldehydes, 2.6% alcohols, and 36.6% benzyl. Overripe berries have high volatile emissions and show a composition dominated mainly by esters followed by alcohols, ketones, and aldehydes. The lowest-level compounds were monoterpenes. The number of compounds found in CBB varied according to sex. In summary, the CBB damage harms coffee berries' quality and aroma. The complete profile compounds generated will help better understand insect-plant relationships and potentially develop effective bait traps.

Organocatalytic Reduction of Aromatic Nitro Compounds: The Use of Solid-Supported Phenyl(2-quinolyl)methanol.

The reduction of aromatic nitro compounds has been performed employing a catalytic amount of Wang resin-supported phenyl(2-quinolyl)methanol (Wang-PQM) in the presence of an excess of NaBH4 to regenerate the reactive reducing species at the end of the process. The reduction products are easily isolated through a simple filtration/extraction protocol, and the catalyst can be efficiently recovered and recycled. The condensation route is generally preferred, and azo- and/or hydrazo-arenes can be easily prepared in high yields.

Two Copper-Containing Polyoxometalate-Based Metal–Organic Complexes as Heterogeneous Catalysts for the C–H Bond Oxidation of Benzylic Compounds and Olefin Epoxidation

Using a one-pot assembly method, two novel copper-containing Keggin-type polyoxometalates (POMs)-based metal-organic complexes, that is, [CuII2(pbba)2NO3-(H2O)2(PW12O40)]·3H2O [PW12-Cu-pbba, H2pbba = 1,1'-(1,4-phenylene-bis(methylene))-bis(pyridine-3-carboxylic acid)] and [CuII2(pbba)2(H2O)2(GeW12O40)]·3H2O (GeW12-Cu-pbba), were successfully synthesized. These two complexes are isostructural, differing only in their POM components. They are applicable as heterogeneous catalysts for the C-H bond oxidation of benzylic compounds and olefin epoxidation under mild conditions, with oxygen as the oxidant and isobutyraldehyde as the coreductant. The catalytic activity of PW12-Cu-pbba was superior to that of GeW12-Cu-pbba. Under the optimal conditions, PW12-Cu-pbba catalyzed the oxidation of indane into 1-indanone with an 81% yield and >99% selectivity within 48 h. As heterogeneous catalysts, both complexes demonstrated excellent recoverability and high stability and could be stably reused five times without significant activity loss.

Interfacial Composition of Surfactant Aggregates in the Presence of Fragrance: A Chemical Trapping Study.

In recent years, there has been increasing interest in daily-use chemical products providing a pleasant scent. The added fragrance molecules may induce microstructural transitions of surfactant aggregates, which further affect the physical and chemical properties of the products. Here, the effects of four types of aromatic alcohols (cinnamyl alcohol, phenyl ethanol, phenyl methanol and anisyl alcohol) on cetyltrimethylammonium bromide (CTAB)/KBr aggregates were studied. The combined results from rheology, dynamic light scattering, and transmission electron microscopy measurements showed that cinnamyl alcohol induced significant micellar growth, while increases in micellar growth were less obvious for the other aromatic alcohols. The changes in the interfacial molarities of water, aromatic alcohol, and bromide ions during such transitions were studied using the chemical trapping method. Transitions resulting from added cinnamyl alcohol were accompanied by significant declines in interfacial water and bromide ion molarities, and a rise in interfacial alcohol molarity. The marked decrease in interfacial water molarity was not observed in previous studies of the octanol induced formation of wormlike micelles and vesicles, indicating that a different mechanism was presented in the current system. Nuclear magnetic resonance investigation showed that π–π stacking between cinnamyl alcohols, but not cation–π interactions between alcohols and CTAB headgroups, facilitated the tight packing of alcohol molecules in CTAB aggregates and the repulsion of water from the interfacial region. The current study may provide a theoretical basis for the morphological regulation of surfactant aggregates in the presence of additives.

(C6F5)3B Catalyzed One-Pot Synthesis of Benzo[b]Cyclopenta[e][1,4]Oxazin-2(1H)-One and Thiazin-2(1H)-One Derivatives from Furan-2-yl(Phenyl)Methanol and 2-Aminophenol/Thiophenol

An efficient (C6F5)3B catalyzed method has been developed for the synthesis of benzo[b]cyclopenta[e][1,4]oxazin-2(1H)-one and thiazin-2(1H)-one derivatives from furan-2-yl(phenyl)methanol (1) and 2-aminophenol/thiophenol (2) under reflux in acetonitrile. This reaction proceeds through an aza-Piancatelli rearrangement/Michael reaction in one-pot. This strategy provides a facile and rapid access to benzo[b]cyclopenta[e][1,4]oxazin-2(1H)-one and thiazin-2(1H)-one derivatives (3a-l) in good to high yields under mild conditions. Several advantages, such as simple reaction procedure, low catalyst loading, broad substrate scope, easy product isolation, high functional group tolerance, and short reaction time make this strategy more attractive.

Chemoselective Oxyfunctionalization of Functionalized Benzylic Compounds with a Manganese Catalyst.

Whilst allowing for easy access to synthetically versatile motifs and for modification of bioactive molecules, the chemoselective benzylic oxidation reactions of functionalized alkyl arenes remain challenging. Reported in this study is a new non‐heme Mn catalyst stabilized by a bipiperidine‐based tetradentate ligand, which enables methylene oxidation of benzylic compounds by H2O2, showing high activity and excellent chemoselectivity under mild conditions. The protocol tolerates an unprecedentedly wide range of functional groups, including carboxylic acid and derivatives, ketone, cyano, azide, acetate, sulfonate, alkyne, amino acid, and amine units, thus providing a low‐cost, more sustainable and robust pathway for the facile synthesis of ketones, increase of complexity of organic molecules, and late‐stage modification of drugs.

Chemoselective Oxyfunctionalization of Functionalized Benzylic Compounds with a Manganese Catalyst

AbstractWhilst allowing for easy access to synthetically versatile motifs and for modification of bioactive molecules, the chemoselective benzylic oxidation reactions of functionalized alkyl arenes remain challenging. Reported in this study is a new non‐heme Mn catalyst stabilized by a bipiperidine‐based tetradentate ligand, which enables methylene oxidation of benzylic compounds by H2O2, showing high activity and excellent chemoselectivity under mild conditions. The protocol tolerates an unprecedentedly wide range of functional groups, including carboxylic acid and derivatives, ketone, cyano, azide, acetate, sulfonate, alkyne, amino acid, and amine units, thus providing a low‐cost, more sustainable and robust pathway for the facile synthesis of ketones, increase of complexity of organic molecules, and late‐stage modification of drugs.

Catalytic asymmetric Tsuji-Trost α-benzylation reaction of N-unprotected amino acids and benzyl alcohol derivatives.

Catalytic asymmetric Tsuji–Trost benzylation is a promising strategy for the preparation of chiral benzylic compounds. However, only a few such transformations with both good yields and enantioselectivities have been achieved since this reaction was first reported in 1992, and its use in current organic synthesis is restricted. In this work, we use N-unprotected amino acid esters as nucleophiles in reactions with benzyl alcohol derivatives. A ternary catalyst comprising a chiral aldehyde, a palladium species, and a Lewis acid is used to promote the reaction. Both mono- and polycyclic benzyl alcohols are excellent benzylation reagents. Various unnatural optically active α-benzyl amino acids are produced in good-to-excellent yields and with good-to-excellent enantioselectivities. This catalytic asymmetric method is used for the formal synthesis of two somatostatin mimetics and the proposed structure of natural product hypoestestatin 1. A mechanism that plausibly explains the stereoselective control is proposed.

Metal-Free Boron-Mediated ortho-C-H Hydroxylation of N-Benzyl-3,4,5-tribromopyrazoles.

A novel route has been reported for C-H hydroxylation of benzyl compounds directed by a 3,4,5-tribromopyrazole auxiliary via boronation/oxidation using BBr3 and NaBO3·4H2O. The strategy exhibits outstanding site selectivity and affords the corresponding phenols in moderate to excellent yields under metal-free conditions. Besides, this protocol can be achieved in one pot, which is highly promising as a practical method for use in a multistep organic synthetic process.