Dehydrogenation Of Benzyl Alcohol Research Articles

Significant augmentation of hydrogen and benzaldehyde production through mediator-free in-situ synthesis of CuNi/CN photocatalysts for benzyl alcohol splitting

Amidst growing concerns surrounding global warming and energy scarcity, there is an urgent demand for more efficient and environmentally friendly methods of hydrogen production. In response, we introduce a novel mediator-free in-situ approach for synthesizing CuNi/CN composite photocatalysts. This method entails the synthesis of copper and nickel complexes to fabricate bimetallic Cu and Ni nanoparticles on carbon nitride (CN). These catalysts are deployed for the photocatalytic dehydrogenation of benzyl alcohol, resulting in the generation of hydrogen and benzaldehyde. The CuNi bimetal-loaded CN structure provides ample active sites and demonstrates a low hydrogen reduction overpotential, thereby enhancing both charge separation and surface hydrogen reduction processes. In comparison to pure CN, the composite photocatalyst exhibits significantly improved photocatalytic activity. Notably, the composite 2 % Cu1Ni1/CN photocatalyst achieves a record-high hydrogen production rate of about 80 μmol g-1h−1, representing an impressive increase of approximately 533 times compared to pristine CN. Moreover, the catalyst offers cost-effectiveness, ease of preparation, and reusability, ensuring stable hydrogen production efficiency over multiple cycles. This precious metal-free composite photocatalyst not only facilitates the synthesis of valuable compounds but also promotes sustainable advancements in efficient hydrogen energy generation.

1T/2H MoSe2 modified ZnIn2S4 with modulating internal electric field to boost efficient performance of photocatalytic H2 evolution and epoxide alcoholysis

Herein, the extended layer spacing 1T MoSe2 coupled with ZnIn2S4 nanosheets through in-situ growth, and ultimately obtained 1T /2H MoSe2/ZnIn2S4 photocatalysts with S-scheme heterojunction. This rational structure enables photogenerated carriers to rapidly transfer to MoSe2 via Mo-S bond. In order to further address the problem of wasted oxidative half-reaction, we rely on the dehydrogenation of benzyl alcohol as a carrier for hole depletion. Notably, optimized 1T/2H MoSe2/ZnIn2S4 has superior H2 evolution ability, reaching up to 11.271 mmol·g−1·h−1 and the apparent quantum efficiency at 420 nm is 10.3 %. Meanwhile, the conversion rate of benzyl alcohol to high value-added benzaldehyde is 60.60 %. In addition, the Zn acidic sites can achieve polarization of epoxides and precise cleavage C-O bond. Thus, it also has the ability to high selectivity and efficient photocatalytic epoxide alcoholysis. This work proposes a new insight for enhancing photocatalytic properties via regulating IEF to fabricate S-scheme heterostructure.

Boosting photocatalytic hydrogen peroxide evolution through aerobic oxidative dehydrogenation of benzyl alcohol over amino acid hyper-cross-linked polymer in two-phase system

The fusion of photocatalytic hydrogen peroxide (H2O2) production with the generation of high-value organic compounds carries the potential to optimize the utilization of solar energy. The efficient generation and separation of products constitute indispensable elements in constructing a proficient reaction system. Herein, the photocatalytic production of H2O2 via the aerobic oxidative dehydrogenation of benzyl alcohol (BA) was realized through the application of an amino acid hyper-cross-linked polymer (H6P-HCPs) in two-phase system. The outcomes unveiled that the H6P-HCPs with 1:6 M ratio of L-phenylalanine (L-Phe) and hexaphenylbenzene (HPB) achieves the highest generation rate of H2O2 (29.26 mmol∙gcat-1∙h-1), stoichiometric amount of benzyl alcohol oxidation products were obtained as 96% benzaldehyde (23.94 mmol∙gcat-1∙h-1) and 4% benzoic acid (5.56 mmol∙gcat-1∙h-1). Time-dependent density functional theory (TDDFT) calculations illuminated that the presence of L-Phe monomers of H6P-HCPs not only facilitated electron transfer from L-Phe to HPB, capitalizing on electronegativity differentials, but also instigated the formation of O2•- while concurrently adjusting its hydrophobic nature. These factors, in concert, were instrumental in the accomplishment of this highly efficient photocatalytic process.

Pd(II)‐Catalyzed Aerobic Alcohol Oxidation for Multicomponent Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones in Water

AbstractWe describe a multicomponent reaction between isatoic anhydrides, alkylamines and benzylic alcohols using Pd(II)/TPPMS catalyst with cocatalytic Cu(II) salt in water. This cascade reaction involves the catalytic dehydrogenation of benzyl alcohol to benzaldehyde under aerobic conditions, followed by cyclocondensation with in situ generated 2‐aminobenzamides, allowing rapid access to 2,3‐dihydroquinazolin‐4(1H)‐ones (DHQs). This practical method enables direct access to a series of DHQs without strong bases and hazardous oxidants. Mechanistic studies reveal that the multicomponent reaction is first order with respect to the concentrations of benzyl alcohol and catalysts, and proceeds independently of the concentration of the 2‐aminobenzamide intermediate.

Directing the CdS nanosheet and nanowire to high efficiency for photocatalytic anaerobic dehydrogenation of benzyl alcohol to benzaldehyde by depositing Au25 nanoclusters

The photocatalysis of direct dehydrogenation of benzyl alcohol to benzaldehyde is an energy saving way to synthesize fine chemicals and pure hydrogen by using solar energy. The CdS-based catalysts were one of the typical kinds of photocatalysts for this reaction. The morphology of CdS could be easily tuned, which could greatly influence the photocatalytic performances. However, the morphology effect of CdS on the photocatalytic behaviour of the direct dehydrogenation of benzyl alcohol has not been investigated yet. In this work, we synthesized CdS with two different morphologies (nanosheet (NS) and nanowire (NW)) and found the CdS-NS showed much higher photocatalytic activity for converting the benzyl alcohol than the CdS-NW, but the selectivity to benzaldehyde over the two supports was very low. By depositing Au25 nanoclusters on the CdS-NW and CdS-NS, the morphology effect of the CdS support could be mitigated and their catalytic activity and selectivity could be greatly boosted for the photocatalytic anaerobic dehydrogenation of benzyl alcohol to benzaldehyde and H2. The results of this work would provide new insight into the design of efficient photocatalysts for synthesizing fine chemicals.

DFT Mechanistic Investigation on Manganese Pincer Complex Catalysed Cross-Coupling of Methanol with Benzyl Alcohol to Afford Methyl Benzoate.

In this paper the density functional theory (DFT) method was employed to investigate the cross-coupling of methanol with benzyl alcohol to afford methyl benzoate, catalysed by Mn-PNN pincer complex. The whole reaction process mainly includes three stages: the dehydrogenation of benzyl alcohol to benzaldehyde, the coupling of benzaldehyde with methanol to hemiacetal and the dehydrogenation of hemiacetal to methyl benzoate. The calculated results indicated that two dehydrogenation processes are influenced by two competitive mechanisms of inner and outer spheres. Dehydrogenation of benzyl alcohol to benzaldehyde is the rate-determining step of the whole reaction, with the energy barrier of 22.1 kcal/mol. In addition, the regeneration of catalyst is also extremely important. Compared with direct dehydrogenation, the dehydrogenation mode assisted by formic acid is more advantageous. This work might provide theoretical insights and shed light on the design of cheap transition-metal catalysts for the dehydrogenation reaction.

Transition-Metal-Free Dehydrogenation of Benzyl Alcohol for C-C and C-N Bond Formation for the Synthesis of Pyrazolo[3,4-b]pyridine and Pyrazoline Derivatives.

A series of cascade reactions that produce a range of functionalized aromatic heterocyclic compounds with pyrazole/pyrazoline cores have been developed. The method relies on a metal-free dehydrogenative process to produce in-situ benzaldehydes. The produced benzaldehyde was then allowed to react with some other substances, including acetophenone, pyrazole amine, and phenylhydrazine. The intermediate produced from these substrates underwent several chemical processes, including electrocyclization, the aza-Diels-Alder reaction, and the formation of intramolecular C-N bonds. These positive outcomes would open up the possibility of producing biologically active pyrazolo[3,4-b]pyridine and pyrazoline derivatives through a variety of possible reactions.

Solvent- and additive-free liquid-phase acceptorless dehydrogenation of benzyl alcohol to benzaldehyde catalyzed by carbon-encapsulating Cu nanoparticles: a combined experimental and theoretical study

Solvent- and additive-free liquid-phase acceptorless dehydrogenation of benzyl alcohol to benzaldehyde catalyzed by carbon-encapsulating Cu nanoparticles: a combined experimental and theoretical study

Ruthenium complexes of 1,4-diazabutadiene ligands with a cis-RuCl2 moiety for catalytic acceptorless dehydrogenation of alcohols: DFT evidence of chemically non-innocent ligand participation.

The acceptorless dehydrogenative coupling (ADC) of primary alcohols to esters by diazabutadiene-coordinated ruthenium compounds is reported. Treatment of cis-Ru(dmso)4Cl2 in acetone at 56 °C with different 1,4-diazabutadienes [p-XC6H4N[double bond, length as m-dash]C(H)(H)C[double bond, length as m-dash]NC6H4X-p; X = H, CH3, OCH3, and Cl; abbreviated as DAB-X], gives trans-Ru[κ2-N,N-DAB-X]2Cl2 as the kinetic product of substitution. Heating these products in o-xylene at 144 °C gives the thermodynamically favored cis-Ru[κ2-N,N-DAB-X]2Cl2 isomers. Electronic structure calculations confirm the greater stability of the cis diastereomer. The molecular structures for each pair of geometric isomers have been determined by X-ray diffraction analyses. Cyclic voltammetry experiments on the complexes show an oxidative response and a reductive response within 0.50 to 0.93 V and -0.76 to -1.24 V vs. SCE respectively. The cis-Ru[κ2-N,N-DAB-X]2Cl2 complexes function as catalyst precursors for the acceptorless dehydrogenative coupling of primary alcohols to H2 and homo- and cross-coupled esters. When 1,4-butanediol and 1,5-pentanediol are employed as substrates, lactones and hydroxyaldehydes are produced as the major dehydrogenation products, while secondary alcohols afforded ketones in excellent yields. The mechanism for the dehydrogenation of benzyl alcohol to benzyl benzoate and H2 using cis-Ru[κ2-N,N-DAB-H]2Cl2 (cis-1) as a catalyst precursor was investigated by DFT calculations. The data support a catalytic cycle that involves the four-coordinate species Ru[κ2-N,N-DAB-H][κ1-N-DAB-H](κ1-OCH2Ph) whose protonated κ1-diazabutadiene moiety functions as a chemically non-innocent ligand that facilitates a β-hydrogen elimination from the κ1-O-benzoxide ligand to give the corresponding hydride HRu[κ2-N,N-DAB-H][κ1-N-DAB-H](κ2-O,C-benzaldehyde). H2 production follows a Noyori-type elimination to give (H2)Ru[κ2-N,N-DAB-H][κ1-N-DAB-H](κ1-O-benzaldehyde) as an intermediate in the catalytic cycle.

Effects of ancillary ligands in acceptorless benzyl alcohol dehydrogenation mediated by phosphine-free cobalt complexes

Effects of ancillary ligands in acceptorless benzyl alcohol dehydrogenation mediated by phosphine-free cobalt complexes

Co0.6Ni0.4S2/rGO Photocatalyst for One-Pot Synthesis of Imines from Nitroaromatics and Aromatic Alcohols by Transfer Hydrogenation

Co0.6Ni0.4S2/rGO catalysts exhibit excellent photocatalytic performance for one-step synthesis of N-benzylideneaniline from nitrobenzene and benzyl alcohol by transfer hydrogenation, and the selectivity and yield of N-benzylideneaniline can reach as high as 93% and 77.2%, respectively. The reaction process for the synthesis of imines can be divided into two steps: benzyl alcohol is oxidized to benzaldehyde, while nitrobenzene is reduced to aniline; benzaldehyde and aniline are condensed to form imines. Under visible light irradiation, photo-induced electrons in Co0.6Ni0.4S2/rGO photocatalyst play an important role in activating nitrobenzene and benzaldehyde. Photo-induced holes are mainly responsible for the partial dehydrogenation of benzyl alcohol to benzaldehyde. Next, aniline molecules condense with benzaldehyde molecules to synthesize imine. The photocatalytic system provides an environmentally friendly for the synthesis of imines and supplies an alternative approach for hydrogen auto-transfer reactions.

Noble-metal-free plasmonic MoO3−x-based S-scheme heterojunction for photocatalytic dehydrogenation of benzyl alcohol to storable H2 fuel and benzaldehyde

Simultaneous generation of H2 fuel and value-added chemicals has attracted increasing attention since the photogenerated electrons and holes can be both employed to convert solar light into chemical energy. Herein, for realizing UV-visible-NIR light driven dehydrogenation of benzyl alcohol (BA) into benzaldehydes (BAD) and H2, a novel localized surface plasmon resonance (LSPR) enhanced S-scheme heterojunction was designed by combining noble-metal-free plasmon MoO3–x as oxidation semiconductor and Zn0.1Cd0.9S as reduction semiconductor. The photoredox system of Zn0.1Cd0.9S/MoO3–x displayed an unconventional reaction model, in which the BA served as both electron donor and acceptor. The S-scheme charge transfer mechanism induced by the formed internal electric field enhanced the redox ability of charge carriers thermodynamically and boosted charge separation kinetically. Moreover, due to the LSPR effect of MoO3−x nanosheets, Zn0.1Cd0.9S/MoO3−x photocatalysts exhibited strong absorption in the region of full solar spectrum. Therefore, the Zn0.1Cd0.9S/MoO3−x composite generated H2 and BAD simultaneously via selective oxidation of BA with high production (34.38 and 33.83 mmol·g−1 for H2 and BAD, respectively) upon full solar illumination. Even under NIR light irradiation, the H2 production rate could up to 94.5 mmol·g−1·h−1. In addition, the Zn0.1Cd0.9S/MoO3–x composite displayed effective photocatalytic H2 evolution rate up to 149.2 mmol·g−1·h−1 from water, which was approximate 6 times that of pure Zn0.1Cd0.9S. This work provides a reference for rational design of plasmonic S-scheme heterojunction photocatalysts for coproduction of high-value chemicals and solar fuel production.

Oxygen vacancies-enriched Ta-doped Bi2WO6 with Pt as cocatalyst for boosting the dehydrogenation of benzyl alcohol in water

Selective photocatalytic oxidation of alcohols into value-added aldehydes or ketones is a promising alternative for alcohol oxidation concerning the mild reaction conditions and the controllable selectivity. To increase the activity, defective Bi2WO6 with abundant oxygen vacancies (OVs) was synthesized via substitution of W by Ta. The resulting Ta-doped Bi2WO6 loaded with Pt nanoparticles as co-catalyst efficiently converted aromatic and aliphatic alcohols into the corresponding carbonyl compounds with high selectivity (>99%) in aqueous solution under visible-light irradiation and anaerobic conditions, with equivalent H2 as a coupled product. The optimal amount of benzyl alcohol converted by the Ta-doped catalyst was two times higher than that of the undoped catalyst. Surface OVs were found to favor the dissociative adsorption of the alcohols and to prolong the life time of the charge carriers. More importantly, isotopic labelling experiments confirmed that over Pt-loaded pristine undoped Bi2WO6, the coupled H2 product results from water reduction, while over Pt-loaded Ta-doped Bi2WO6, the produced H2 originates from benzyl alcohol, implying that benzyl alcohol can be photo-oxidized via a complete dehydrogenation pathway. Thus, enriched surface OVs in photocatalysts can activate α-C-H bonds in alcohols, boosting the photocatalytic oxidation performance.

One-Pot Synthesis of Schiff Bases by Defect-Induced TiO2-x-Catalyzed Tandem Transformation from Alcohols and Nitro Compounds.

Schiff bases that are generally formed from condensation reactions of aldehydes (or ketones) and amino groups could also be produced by a photodriven one-pot tandem reaction between alcohols and nitro compounds, in our case. Herein, TiO2-x porous cages derived from NH2-MIL-125 by a self-sacrificing template route are used to study the organic transformation and exhibit 100% conversion efficiency of nitrobenzene and 100% selectivity for Schiff bases in the system of benzyl alcohol (5 mL) and nitrobenzene (41 μL) upon light irradiation, but hydrogen by dehydrogenation of benzyl alcohol cannot be detected. Successful occurrence of the organic transformation is mainly attributed to Ti(III)-oxygen vacancy associates. Surface oxygen vacancy-related Ti(III) sites are responsible for binding with nitro groups, and low-coordinated Ti5c sites selectively adsorb hydroxyl groups of benzyl alcohol. The Ti(III) and oxygen vacancy associates capture photogenerated electrons for achievement of multielectron reduction of nitrobenzene and the subsequent Schiff base condensation reaction with the as-formed benzaldehyde.

Solventless Mechanochemical Fabrication of ZnO–MnCO3/N-Doped Graphene Nanocomposite: Efficacious and Recoverable Catalyst for Selective Aerobic Dehydrogenation of Alcohols under Alkali-Free Conditions

Catalytic efficacy of metal-based catalysts can be significantly enhanced by doping graphene or its derivatives in the catalytic protocol. In continuation of previous work regarding the catalytic properties of highly-reduced graphene oxide (HRG), graphene-oxide (GO) doped mixed metal oxide-based nanocomposites, herein we report a simple, straightforward and solventless mechanochemical preparation of N-doped graphene (NDG)/mixed metal oxide-based nanocomposites of ZnO–MnCO3 (i.e., ZnO–MnCO3/(X%-NDG)), wherein N-doped graphene (NDG) is employed as a dopant. The nanocomposites were prepared by physical milling of separately fabricated NDG and ZnO–MnCO3 calcined at 300 °C through eco-friendly ball mill procedure. The as-obtained samples were characterized via X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), Raman, Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDX) and surface area analysis techniques. To explore the effectiveness of the obtained materials, liquid-phase dehydrogenation of benzyl alcohol (BOH) to benzaldehyde (BH) was chosen as a benchmark reaction using eco-friendly oxidant (O2) without adding any harmful surfactants or additives. During the systematic investigation of reaction, it was revealed that the ZnO–MnCO3/NDG catalyst exhibited very distinct specific-activity (80 mmol/h.g) with a 100% BOH conversion and <99% selectivity towards BH in a very short time. The mechanochemically synthesized NDG-based nanocomposite showed remarkable enhancement in the catalytic performance and increased surface area compared with the catalyst without graphene (i.e., ZnO–MnCO3). Under the optimum catalytic conditions, the catalyst successfully transformed various aromatic, heterocyclic, allylic, primary, secondary and aliphatic alcohols to their respective ketones and aldehydes with high selectively and convertibility without over-oxidation to acids. In addition, the ZnO–MnCO3/NDG was also recycled up to six times with no apparent loss in its efficacy.

Metal‐Free Synthesis of Alkenylazaarenes and 2‐Aminoquinolines through Base‐Mediated Aerobic Oxidative Dehydrogenation of Benzyl Alcohols

AbstractA metal‐free, base‐mediated, and atom‐efficient oxidative dehydrogenative coupling of substituted phenylmethanols (benzyl alcohols) with methyl azaarenes or phenylacetonitriles to afford substituted alkenylazaarenes or 2‐aminoquinolines, respectively is described. CsOH.H2O was discovered to be the base of choice for obtaining optimal yields of the title compounds, although the reaction could proceed with KOH as well. The protocol that works efficiently in the presence of air is amenable over broad range of substrates.

Phenylacetylene hydrogenation coupled with benzyl alcohol dehydrogenation over Cu/CeO2: A consideration of Cu oxidation state

We have examined the effect of copper oxidation state in the continuous gas phase coupled phenylacetylene hydrogenation (to styrene) with benzyl alcohol dehydrogenation (to benzaldehyde) over Cu/CeO2. Analysis by H2-TPR, XPS, XRD and STEM-EDX analyses demonstrates the generation of a range of Cu oxidation states (Cu0 (13–77%), Cu+ (13–74%), Cu2+ (0–55%)). The stepwise formation of styrene and ethylbenzene was promoted in the stand-alone phenylacetylene hydrogenation. An increase in Cu0/Cu+ (from H2-TPR and XPS) enhanced H2 chemisorption and styrene TOF, but with low hydrogen utilisation efficiency. The formation of benzaldehyde and toluene was promoted in the stand-alone dehydrogenation of benzyl alcohol, where benzaldehyde selectivity and TOF correlate with the concentration of Cu0. Full hydrogen utilisation, exclusive benzaldehyde/styrene formation and a (3-fold) greater styrene TOF (to attain 100% yield) was achieved in the coupled process, where hydrogenation/dehydrogenation activity correlates with Cu+/Cu0. This opens new directions for sustainable “hydrogen free” hydrogenations over non-noble Cu catalysts.

Reversible PCET and Ambient Catalytic Oxidative Alcohol Dehydrogenation by {V=O} Perfluoropinacolate Complexes.

A new air-stable catalyst for the oxidative dehydrogenation of benzylic alcohols under ambient conditions has been developed. The synthesis and characterization of this compound and the related monomeric and dimeric V(IV)- and V(V)-pinF (pinF = perfluoropinacolate) complexes are reported herein. Monomeric V(IV) complex (Me4N)2[V(O)(pinF)2] (1) and dimeric (μ-O)2-bridged V(V) complex (Me4N)2[V2(O)2(μ-O)2(pinF)2] (3a) are prepared in water under ambient conditions. Monomeric V(V) complex (Me4N)[V(O)(pinF)2] (2) may be generated via chemical oxidation of 1 under an inert atmosphere, but dimerizes to 3a upon exposure to air. Complexes 1 and 2 display a perfectly reversible VIV/V couple at 20 mV (vs Ag/AgNO3), whereas a quasi-reversible VIV/V couple at -865 mV is found for 3a. Stoichiometric reactions of 3a with both fluorenol and TEMPOH result in the formation of (Me4N)2[V2(O)2(μ-OH)2(pinF)2] (4a), which contains two V(IV) centers that display antiferromagnetic coupling. In order to structurally characterize the dinuclear anion of 4a, {K(18C6)}+ countercations were employed, which formed stabilizing K···O interactions between the counterion and each terminal oxo moiety and H-bonding between the oxygen atoms of the crown ether and μ-OH bridges of the dimer, resulting in {K(18C6)}2[V2(O)2(μ-OH)2(pinF)2] (4b). The formal storage of H2 in 4a is reversible and proton-coupled electron transfer (PCET) from crystals of 4a regenerates 3a upon exposure to air over the course of several days. Furthermore, the reaction of 3a (2%) under ambient conditions with excess fluorenol, cinnamyl alcohol, or benzyl alcohol resulted in the selective formation of fluorenone (82% conversion), cinnamaldehyde (40%), or benzaldehyde (7%), respectively, reproducing oxidative alcohol dehydrogenation (OAD) chemistry known for VOx surfaces and demonstrating, in air, the thermodynamically challenging selective oxidation of alcohols to aldehydes/ketones.

Visible-light-driven photocatalytic hydrogen production coupled with selective oxidation of benzyl alcohol over CdS@MoS2 heterostructures

Photocatalytic hydrogen production coupled with selective oxidation of organic substrates to produce high-value-added fine chemicals has drawn increasing attention. Herein, we report a noble metal-free photocatalyst for the highly efficient and simultaneous generation of hydrogen and the selective oxidation of benzyl alcohol into benzaldehyde over CdS@MoS2 heterostructures under visible light. Without the need for a sacrificial agent, CdS@MoS2 displayed an excellent hydrogen production rate of 4233 µmol g−1 h−1 with 0.3 mmol benzyl alcohol, which is approximately 53 times higher than that of bare CdS nanorods (80 µmol g−1 h−1). The reaction system was highly selective for the oxidation of benzyl alcohol into benzaldehyde. When the amount of benzyl alcohol increased to 1.0 mmol, the hydrogen production reached 9033 µmol g−1 h−1. Scanning electron microscopy and transmission electron microscopy images revealed that p-type MoS2 sheets with a flower-like structure closely adhered to n-type semiconductor CdS nanorods through the formation of a p-n heterojunction. As a potential Z-scheme photocatalyst, the CdS@MoS2 heterostructure effectively produces and separates electron-hole pairs under visible light. Thus, the electrons are used for reduction to generate hydrogen, and the holes oxidize benzyl alcohol into benzaldehyde. Moreover, a mechanism of photogenerated charge transfer and separation was proposed and verified by photoluminescence, electrochemical impedance spectroscopy, photocurrent and Mott-Schottky measurements. The results reveal that the CdS@MoS2 heterojunctions have rapid and efficient charge separation and transfer, thereby greatly improving benzyl alcohol dehydrogenation. This work provides insight into the rational design of high-performance Z-scheme photocatalysts and the use of holes and electrons to obtain two valuable chemicals simultaneously.

Catalytic Conversion of Benzyl Alcohol to Benzaldehyde over a Cu-CeO2 Catalyst: Utilization of CO2 for Enhancement of Selectivity and Activity

CO2-assisted dehydrogenation of benzyl alcohol to benzaldehyde over Cu nanoparticles dispersed on CeO2 was reported. Cu nanoparticles with an average size of ∼11.4 nm dispersed over CeO2 cubes were...