Bent Bis Research Articles

Application of phosphorus-bridged rigid, bent bis(NHCs) as dipodal ligands in main group and transition metal chemistry.

Phosphorus-bridged rigid, bent bis(N-heterocyclic) carbenes have not been reported, so far, despite having structural features that could make them interesting ligands in coordination and main group element chemistry. In previous reports, we had demonstrated that tuning of σ3- and σ4-phosphorus environments in planarised bis(NHCs) affects electronic properties and can provide additional coordination sites. Herein, we report on first examples of synthesis and conversion of 1,4-diphosphabarrelene-related compounds into rigid bent, doubly P-bridged bis(NHCs). The formation of main group element adducts with substrates from group 13, 14 and 15 illustrates opportunities to access novel scaffolds and to create nonplanar branching points. DFT calculations reveal the new bis(NHCs) to be good candidates as novel soft/hard ligands with up to four coordination sites. The synthesis of a dinuclear Fe(CO)4 complex is demonstrated. The thermal retro-[4 + 2] cycloaddition was theoretically and experimentally explored for a variety of ionic and zwitterionic 1,4-diphosphabarrelenes, and the generation and trapping of a dinuclear Fe(0) bis(NHC) complex with a tricyclic 1σ2,4 σ2-diphosphinine scaffold is presented.

Adducts of Bicyclic (Alkyl)(Amino)Carbene with ECl3 and Three Electron Reduction Thereof: Syntheses of BICAAC Stabilized E−E Bonded Compounds (E=P, Sb)

AbstractThe stoichiometric reaction of bicyclic (alkyl)(amino)carbene (BICAAC) with group 15 chlorides, ECl3 (E=P, Sb) to form the Lewis adducts BICAAC:ECl3 (E=P (1), Sb (2)) has been investigated in the present work. The BICAAC smoothly reacts with PPhCl2 to form [BICAAC:PPhCl2] which on in‐situ two electron reduction with 2 equivalents of KC8 afforded the phosphinidene complex, BICAAC=P‐Ph (3). Complete dechlorination of the BICAAC‐ECl3 adducts 1 and 2 with 3 equivalents of KC8 leads to three‐electron reduction to afford low‐valent trans bent bis(BICAAC)E2 complexes (E=P (4) and Sb (5)). These complexes are the first examples of BICAAC adducts with pnictogens and all the complexes have been characterized by different spectroscopic techniques and their solid‐state structure have been elucidated by single crystal X‐ray diffraction.

Electrocatalytic Hydrogen Evolution of Bent Bis(dipyrrin) Ni(II) Complexes.

Planar Ni(II) porphyrinoid complexes have been widely used in electrochemical carbon dioxide reduction reaction and oxygen reduction reaction as well as hydrogen evolution reaction (HER). However, nonplanar Ni(II) tetra-pyrrolic complexes have not been thoroughly investigated thus far. In this study, three highly bent bis(dipyrrin) Ni(II) complexes have been synthesized to investigate their structure, electronic property, and electrocatalytic HER activities. Cyclic voltammetry and thin-layer UV-visible spectroelectrochemistry studies revealed four redox processes, yielding two reduced species as the final products. The ic/ip values of phenyl- and pentafluorophenyl-bearing bis(dipyrrin) Ni(II) complexes were >30 when trifluoroacetic acid was used as the proton source, and their Faradaic efficiencies for H2 generation were >93%. Density functional theory calculations of the HERs revealed low endothermic energies of bent bis(dipyrrin) Ni(II) complexes.

Luminescent, Helical and Highly Stable Zn(II) and Cd(II) Coordination Polymers: Structural Diversity and Selective Sensing of 4‐Nitroaniline in Water

AbstractUtilizing a bent bis(naphthalene) and hydroxy‐based dicarboxylate linker (mbhna) and two different tridentate polypyridyl ligands (bpma and bpta), four new coordination polymers (CPs) of Zn(II) and Cd(II) namely, [Zn(mbhna)(bpma)]n (1) {[Cd(mbhna)(bpma)].DMF}n (2) [Zn(mbhna)(bpta)]n (3) {[Cd(mbhna)(bpta)(CH3OH)]}n (4), are reported. Based on their solid‐state molecular structures determined by single‐crystal X‐ray diffractometry, all are found to be helical 1D CP; interestingly, 4 crystallizes in a chiral space group, showcasing the formation of a chiral CP from achiral components. For the presence of naphthalene moieties in mbhna, their excellent emissive nature is studied in different solvents and further utilized to selectively detect aromatic amines, particularly 4‐nitroaniline in water with detection limits at the ppm level. Utilizing the Stern‐Volmer plots, spectral overlap, and competitive test, their mechanism of action has been established. Furthermore, these are recyclable with good stability after sensing experiments.

Structural Diversity in Luminescent MOFs Containing a Bent Electron‐rich Dicarboxylate Linker and a Flexible Capping Ligand: Selective Detection of 4‐Nitroaniline in Water

A combination of a bent bis(naphthalene) and hydroxy-based dicarboxylate linker and a flexible bis(tridentate)polypyridyl ligand has been employed to self-assemble with two different d10 metal centers, ZnII and CdII , to form structurally diversified luminescent metal-organic frameworks, [Zn2 (tpbn)(mbhna)2 (H2 O)2 ]⋅4 H2 O⋅1.5DMF (1) and {[Cd2 (tpbn)(mbhna)2 ]⋅2DMF}n (2), respectively (where, tpbn=N,N',N'',N'''-tetrakis(pyridine-2-ylmethyl)butane-1,4-diamine and H2 mbhna=4,4'-methylene-bis[3-hydroxy-2-naphthalene carboxylic acid]). Both 1 and 2 are characterized and analyzed by various analytical techniques including single-crystal X-ray diffractometry. Their excellent emissive nature is studied in different solvents and further utilized to selectively detect aromatic amines, particularly 4-nitroaniline in water with detection limits at sub-ppm level. The difference in sensing activity of 1 and 2 toward 4-NA is corroborated well with their structures. The mechanism of action has been established through Stern-Volmer plot, spectral overlap, time-resolved lifetime studies and HOMO-LUMO energy calculations. In addition, 1 and 2 are found to be recyclable and display good stability after sensing experiments.

Alternative (κ1-N:η6-arene vs.κ2-N,N) coordination of a sterically demanding amidinate ligand: are size and electronic structure of the Ln ion decisive factors?

The amine elimination reaction of equimolar amounts of ansa-bis(amidine) C6H4-1,2-{NC(tBu)NH(2,6-iPr2C6H3)}2 (L1H) and [(Me3Si)2N]2Yb(THF)2 affords a bis(amidinate) YbII complex [C6H4-1,2-{NC(tBu)N(2,6-iPr2C6H3)}2]Yb(THF) (1) in 68% yield. Complex 1 features a rather rare η1-amido:η6-arene coordination of both amidinate fragments to the YbII ion, resulting in the formation of a bent bis(arene) structure. Oxidation of 1 by I2 regardless of the molar ratio of reagents (2 : 1 or 1 : 1) leads to the formation of the YbIII species [{(2,6-iPr2C6H3)[double bond, length as m-dash]NC(tBu)NH}-C6H4-1,2-{NC(tBu)N(2,6-iPr2C6H3)}]YbI2(THF)2 (2) in which only one amidinate fragment is coordinated to the ytterbium ion in κ2-N,N'-chelating coordination mode, while the second NCN fragment is protonated in the course of the reaction and is not bound to the metal ion. The outcome of the salt metathesis reaction of LaCl3 with lithium amidinates [C6H4-1,2-{NC(tBu)N(2,6-R2C6H3)}2Li2] (R = Me, iPr) is proven to be strongly affected by the substituent 2,6-R2C6H3 on the amidinate nitrogens. When R = iPr, the salt metathesis reaction occurs smoothly and results in the formation of an ate-chloro-amidinate complex [C6H4-1,2-{NC(tBu)N(2,6-iPr2C6H3)}2]La(μ2-Cl)Li(THF)(μ2-Cl)2Li(THF)2 (3) in which the LaIII ion is coordinated by both amidinate fragments in a "classic"κ2-N,N'-chelating fashion. In the case of R = Me, the reaction requires prolonged heating for completion. Moreover, the salt metathesis reaction is accompanied by the fragmentation of the ligand and affords a trinuclear chloro-amidinate complex [C6H4-1,2-{NC(tBu)N(2,6-Me2C6H3)}2]La{[(tBu)C(N-2,6-Me2C6H3)2]La(THF)}2(μ2-Cl)4(μ3-Cl)2 (4) containing one dianionic ansa-bis(amidinate) and two monoanionic [(tBu)C(N-2,6-Me2C6H3)2] amidinate fragments. DFT calculations are conducted to determine the factor that governs this change in coordination mode and, in particular, the effect of the metal oxidation state.

Photochemistry and Redox Chemistry of an Unsymmetrical Bimetallic Copper(I) Complex.

The bimetallic copper(I) complex Cu2L2 (cis-1) is formed with high diasteroselectivity from [Cu(NCCH3)4][BF4] and HL (4-tert-butyl phenyl(pyrrolato-2-yl-methylene)amine) in a kinetically controlled reaction. cis-1 features a rather short Cu···Cu distance of 2.4756(6) Å and is weakly emissive at room temperature in solution. Oxidatively triggered disproportionation of cis-1 yields elemental copper and the mononuclear copper(II) complex CuL2 (trans-2). One-electron reduction of trans-2 gives cuprate [2]- with a bent bis(pyrrolato) coordinated copper(I) entity. The imine donor atoms of [2]- can insert an additional copper(I) ion giving exclusively the bimetallic complex cis-1 closing the oxidation-elimination-reduction-insertion cycle.

Structural Difference in Superconductive and Nonsuperconductive Bi–S Planes within Bi4O4Bi2S4 Blocks

The relationship between the structure and superconductivity of Bi4O4S3 powders synthesized by heating under ambient and high pressures was investigated using synchrotron X-ray diffraction, Raman spectroscopy, and transmission electron microscopy (TEM) observation. The Bi4O4S3 powders synthesized under ambient pressure exhibited a strong superconductivity (diamagnetic) signal and zero resistivity below ∼4.5 K, while the Bi4O4S3 powder synthesized by the high-pressure method exhibited a low-intensity signal down to 2 K. Further annealing of the latter Bi4O4S3 powder under ambient pressure led to the development of a strong signal and zero resistivity. The crystal structures of all Bi4O4S3 phases consisted of Bi4O4Bi2S4 blocks including a Bi-S layer and anion(s) sandwiched between Bi4O4Bi2S4 blocks, but minor structural differences were detected. A comparison of the structures of the superconductive and nonsuperconductive Bi4O4S3 samples suggested that the superconductive Bi4O4S3 phases had slightly smaller lattice parameters. The average structures of the superconductive Bi4O4S3 phases were characterized by a slightly shorter and less bent Bi-S plane. Raman spectroscopy detected vibration of the S-O bonds, which can be attributed to sandwiched anion(s) such as SO4(2-). TEM observation showed stacking faults in the superconductive Bi4O4S3 phases, which indicated local fluctuation of the average structures. The observed superconductivity of Bi4O4S3 was discussed based on impurity phases, enhanced hybridization of the px and py orbitals of the Bi-S plane within Bi4O4Bi2S4 blocks, local fluctuation of the average structures, compositional deviation related to suspicious anion(s) sandwiched between Bi4O4Bi2S4 blocks, and the possibility of suppression of the charge-density-wave state by enriched carrier concentrations.

Bonding in Complexes of Bis(pentalene)dititanium, Ti2(C8H6)2.

Bonding in the bis(pentalene)dititanium “double-sandwich” species Ti2Pn2 (Pn = C8H6) and its interaction with other fragments have been investigated by density functional calculations and fragment analysis. Ti2Pn2 with C2v symmetry has two metal–metal bonds and a low-lying metal-based empty orbital, all three frontier orbitals having a1 symmetry. The latter may be regarded as being derived by symmetric combinations of the classic three frontier orbitals of two bent bis(cyclopentadienyl) metal fragments. Electrochemical studies on Ti2Pn†2 (Pn† = 1,4-{SiiPr3}2C8H4) revealed a one-electron oxidation, and the formally mixed-valence Ti(II)–Ti(III) cationic complex [Ti2Pn†2][B(C6F5)4] has been structurally characterized. Theory indicates an S = 1/2 ground-state electronic configuration for the latter, which was confirmed by EPR spectroscopy and SQUID magnetometry. Carbon dioxide binds symmetrically to Ti2Pn2, preserving the C2v symmetry, as does carbon disulfide. The dominant interaction in Ti2Pn2CO2 is σ donation into the LUMO of bent CO2, and donation from the O atoms to Ti2Pn2 is minimal, whereas in Ti2Pn2CS2 there is significant interaction with the S atoms. The bridging O atom in the mono(oxo) species Ti2Pn2O, however, employs all three O 2p orbitals in binding and competes strongly with Pn, leading to weaker binding of the carbocyclic ligand, and the sulfur analogue Ti2Pn2S behaves similarly. Ti2Pn2 is also capable of binding one, two, or three molecules of carbon monoxide. The bonding demands of a single CO molecule are incompatible with symmetric binding, and an asymmetric structure is found. The dicarbonyl adduct Ti2Pn2(CO)2 has Cs symmetry with the Ti2Pn2 unit acting as two MCp2 fragments. Synthetic studies showed that in the presence of excess CO the tricarbonyl complex Ti2Pn†2(CO)3 is formed, which optimizes to an asymmetric structure with one semibridging and two terminal CO ligands. Low-temperature 13C NMR spectroscopy revealed a rapid dynamic exchange between the two bound CO sites and free CO.

Facile Self‐Assembly of Metallo‐Supramolecular Ring‐in‐Ring and Spiderweb Structures Using Multivalent Terpyridine Ligands

AbstractA series of metallo‐supramolecular ring‐in‐ring structures was generated by assembling CdII ions and the multivalent terpyridine ligands (L1‐3) composed of one 60°‐bent and two 120°‐bent bis(terpyridine)s with varying alkyl linker lengths. The mechanistic study for the self‐assembly process excluded an entropically templated pathway and showed that the intramolecularly complexed species is the key intermediate leading to ring‐in‐ring formation. The next‐generation superstructure, a spiderweb, was produced in quantitative yield using the elongated decakis(terpyridine) ligand (L5).

Facile Self-Assembly of Metallo-Supramolecular Ring-in-Ring and Spiderweb Structures Using Multivalent Terpyridine Ligands.

A series of metallo-supramolecular ring-in-ring structures was generated by assembling Cd(II) ions and the multivalent terpyridine ligands (L(1-3)) composed of one 60°-bent and two 120°-bent bis(terpyridine)s with varying alkyl linker lengths. The mechanistic study for the self-assembly process excluded an entropically templated pathway and showed that the intramolecularly complexed species is the key intermediate leading to ring-in-ring formation. The next-generation superstructure, a spiderweb, was produced in quantitative yield using the elongated decakis(terpyridine) ligand (L(5)).

Structural diversity of transition-metal coordination polymers derived from isophthalic acid and bent bis(imidazole) ligands

Four coordination polymers associated with bent bis(imidazole) 1,3-bis(imidazol-l-yl-methyl)benzene (mbix) and isophthalic acid (H2ip) or 5-methylisophthalic acid (H2mip) ligands, formulated as {[Cd(mbix)(mip)]·H2O} n (1), {[Co(mbix)(mip)]·0.4H2O} n (2) [Ni(mbix)(mip)H2O] n (3) and [Ni(mbix)(ip)] n (4), were synthesized under hydrothermal conditions and characterized by physico-chemical and spectroscopic methods. Complexes 1 and 2 are isomorphous and exhibit a 1D loop-like chain. Complex 3 features a 2D (4,4) layer, which further extends into an unusual 2D (3,5)-connected 3,5L2 double-layered supramolecular network via classical O–H···O hydrogen bonding interactions. Complex 4 is a 3D network, which shows a rare binodal (3,5)-connected 3,5T1 framework. Moreover, the luminescence and catalytic properties of the complexes for the degradation of methyl orange by sodium persulfate in a Fenton-like process are reported.

Reversible Switching of Coordination Mode of ansa bis(Amidinate) Ligand in Ytterbium Complexes Driven by Oxidation State of the Metal Atom

Reaction of bisamidine C6H4-1,2-{NC(t-Bu)NH(2,6-Me2C6H3)}2 (1) and [(Me3Si)2N]2Yb(THF)2 (THF = tetrahydrofuran) (toluene; room temperature) in a 1:1 molar ratio afforded a bis(amidinate) Yb(II) complex [C6H4-1,2-{NC(t-Bu)N(2,6-Me2C6H3)}2]Yb(THF) (2) in 65% yield. Complex 2 features unusual κ(1)amide, η(6)-arene coordination of both amidinate fragments to the ytterbium ion, resulting in the formation of a bent bis(arene) structure. Oxidation of 2 by Ph3SnCl (1:1 molar ratio) or (PhCH2S)2 (1:0.5) leads to the Yb(III) species [C6H4-1,2-{NC(t-Bu)N(2,6-Me2C6H3)}2]YbCl(1,2-dimethoxyethane) (3) and {[C6H4-1,2-{NC(t-Bu)N(2,6-Me2C6H3)}2]Yb(μ-SCH2Ph)}2 (4), performing "classic" κ(2)N,N'-chelating coordination mode of ansa bis(amidinate) ligand. By the reduction of 3 with equimolar amount of sodium naphthalide [C10H8(•-)][Na(+)] in THF, complex 2 can be recovered and restored to a bent bis(arene) structure. Complex 3 was also synthesized by the salt metathesis reaction of equimolar amounts of YbCl3 and the dilithium derivative of 1 in THF.

Halogen bond directionality translates tecton geometry into self-assembled architecture geometry

The structures of halogen-bonded infinite chains involving two diiodoperfluoroalkanes and a bent bis(pyrid-4′-yl)oxadiazole show that the geometry of the pyridyl pendant rings is translated into the angle between the formed halogen bonds.

Giant hollow MnL2n spherical complexes: structure, functionalisation and applications

Drawing inspiration from the self-assembly of hollow spherical virus capsids and protein cages found in nature, a family of roughly spherical coordination polyhedra with general formula MnL2n was designed and several members of the series have been synthesised. These spherical complexes are self-assembled upon reaction of bent bis(pyridine) ligands with Pd(2+) ions. The introduction of functional side chains into the ligands is straightforward, making the synthesis of both exo- and endohedrally functionalised spherical complexes possible. Accumulation of a high density of functional groups at the periphery of the spherical framework results in an enhancement of the weak interactions used in biomolecular recognition processes and the strong and selective interaction of the complex with a variety of substrates. Discrete and well-defined environments are generated within the spherical framework by functionalisation of the interior of the complex. These environments can be used for the selective encapsulation of guest molecules, including species as diverse as simple metal ions, fluoroalkanes and fullerenes. The well-defined cavity of the spherical complexes can also be exploited for the synthesis of precisely size-controlled nanoparticles and polymers. Most recently, a protein was successfully enclosed within a hollow self-assembled spherical complex, with a long-term view towards the control of protein functions for the development of new applications.

Ring‐Slipped (2,2′‐Bipyridine)(η3‐cyclopentadienyl)(η5‐cyclopentadienyl)vanadium(II) and Its Oxidation to (2,2′‐Bipyridine)bis(η5‐cyclopentadienyl)vanadium(III) Tetraphenylborate

AbstractReaction of vanadocene(II) (4) with 2,2′‐bipyridine (5) leads to (2,2′‐bipyridine)vanadocene(II) (6), exhibiting a η3,η5‐metallocene unit, proved by X‐ray diffraction. By selective one‐electron oxidation employing [Cp2Fe]BPh4 salts, the cationic (2,2′‐bipyridine)vanadocene(III) derivative 7 is formed. It is characterized by a classical bent bis(η5‐cyclopentadienyl)vanadium(III) structure. Characteristic structural details comparing changes in the oxidation states are discussed. The ring‐slip parameters are compared to those of tungsten and other vanadium complexes. (© Wiley‐VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2007)

Organometallic Coordination Polymers Generated from Bent Bis(acetylenylphenyl)oxadiazole Ligands and Ag(I) Salts

Two new bent oxadiazole bridging benzoacetylene ligands 2,5-bis(4-ethynylphenyl)-1,3,4-oxadiazole (L9) and 2,5-bis(3-ethynylphenyl)-1,3,4-oxadiazole (L10) were synthesized. The coordination chemistry of them with various inorganic Ag(I) salts has been investigated. Seven new coordination polymers were prepared by solution reactions and fully characterized by infrared spectroscopy, elemental analysis, and single-crystal X-ray diffraction. [Ag2(L9)](SO3CF3)2 (1) (triclinic, P; a =10.292(4), b = 10.794(4), c = 11.399(5) A; alpha = 98.894(5), beta = 102.360(6), gamma = 90.319(5) degrees ; Z = 2), [Ag(L9)]SbF6 (2) (orthorhombic, Cmca; a = 19.059(9), b = 12.922(6), c = 15.609(7) A; Z = 8), [Ag(L9)]BF4 (3) (orthorhombic, Cmca; a = 19.128(3), b = 12.6042(18), c = 28.003(4) A; Z = 16), [Ag(L9)]ClO4 (4) (monoclinic, P2(1)/c; a = 8.5153(16), b = 19.722(4), c = 10.320(2) A; beta = 105.307(3) degrees ; Z = 4), [Ag(L10)]SO3CF3 (5) (triclinic, P; a = 9.0605(13), b = 10.4956(15), c = 10.8085(16) A; alpha = 101.666(2), beta = 109.269(2), gamma = 100.944(2) degrees ; Z = 2), [Ag(L10)(H2O)(0.5)]BF4.0.5H2O (6) (monoclinic, C2/m; a = 32.180(6), b = 17.027(3), c = 8.1453(15) A; beta = 102.541(3) degrees ; Z = 8), and {[Ag2(L10)2(H2O)](ClO4)2}.o-xylene (7) (monoclinic, P2(1)/c; a = 8.1460(10), b = 17.326(2), c = 30.345(4) A; beta = 97.71 degrees ; Z = 4) were obtained by the combination of L9 and L10 with various Ag(I) salts in a benzene/methylene chloride mixed solvent system. In addition, the luminescent and electrical conductive properties of these new compounds were investigated.

Synthesis and Characterization of New Coordination Polymers Generated from Bent Bis(Cyanophenyl)oxadiazole Ligands and Ag(I) Salts

Two new bent bis(cyanophenyl)oxadiazole ligands, 2,5-bis(4-cyanophenyl)-1,3,4-oxadiazole (L7) and 2,5-bis(3-cyanophenyl)-1,3,4-oxadiazole (L8), were synthesized. The coordination chemistry of these ligands with various Ag(I) salts has been investigated. Seven new coordination polymers, namely, {[Ag(L7)(H2O)]ClO4}n) (1) (triclinic, P1, a = 9.342(4) A, b = 9.889(4) A, c = 10.512(4) A, alpha = 68.978(6) degrees, beta = 78.217(6) degrees, gamma = 81.851(7) degrees, Z = 2), {[Ag(L7)]SO3CF3}n (2) (monoclinic, P2(1)/n, a = 7.559(2) A, b = 23.739(6) A, c = 10.426(3) A, beta = 108.071(4) degrees, Z = 4), {[Ag(L8)]BF4 x 0.5(C6H6) x H2O}n (3) (triclinic, P1, a = 7.498(3) A, b = 10.649(4) A, c = 13.673(5) A, alpha = 98.602(5) degrees, beta = 100.004(5) degrees, gamma =110.232(5) degrees, Z = 2), {[Ag(L8)SbF6] x H2O}n (4) (triclinic, P1, a = 8.2621(9) A, b = 10.6127(12) A, c = 13.3685(15) A, alpha = 98.012(2) degrees, beta = 106.259(2) degrees, gamma = 112.362(2) degrees, Z = 2), {[Ag2(L8)2(SO3CF3)] x H2O}n (5) (triclinic, P1, a = 10.713(4) A, b = 13.449(5) A, c = 15.423(5) A, alpha = 65.908(5) degrees, beta = 74.231(5) degrees, gamma = 83.255(5) degrees, Z = 2), {[Ag2(L8)(C6H6)(ClO4)] x ClO4}n (6) (monoclinic, P2(1)/n, a = 6.9681(17) A, b = 20.627(5) A, c = 17.437(4) A, beta = 95.880(4) degrees, Z = 4), and {[Ag2(L8)(H2PO4)2]}n (7) (triclinic, P1, a = 7.956(2) A, b = 9.938(3) A, c = 14.242(4) A, alpha = 106.191(4) degrees, beta = 97.322(4) degrees, gamma = 107.392(4) degrees, Z = 1), were obtained by the combination of L7 and L8 with Ag(I) salts in a benzene/methylene chloride mixed-solvent system and fully characterized by infrared spectroscopy, elemental analysis, and single-crystal X-ray diffraction. In addition, the luminescence and electrical conductance properties of compounds 1-6 and the host-guest chemistry of compound 3 were investigated.

Iodobis(pyridine-N)bis(η5-trimethylsilylcyclopentadienyl)neodymium

The title complex, [NdI(C 8 H 13 Si) 2 (C 5 H 5 N) 2 ], adopts a typical bent bis(cyclopentadienyl) geometry with one iodide and two pyridine ligands occupying the plane between the cyclopentadienyl moieties. Principal bond lengths include Nd-I 3.1483 (4), Nd-N 2.740(3) and Nd-C 2.715 (4)-2.824 (3) A.

Electrochemical synthesis and structure of the first example of a ferrocene dication: propane-1,3-diyl-1,1′-bis(tetramethylcyclopentadienyl)iron(2+)

The permethylferrocenophane [(pdmcp)Fe][pdmcp =η5,η5-C5Me4(CH2)3C5Me4] and its oxidised species, monocation and dication salts, were synthesised, in which the latter, [(pdmcp)Fe(NCMe)](PF6)2, has a substantially bent bis(cyclopentadienyl) moiety to accommodate one molecule of MeCN.