Bearing-only Simultaneous Localization And Mapping Research Articles

Cross-spectral visual simultaneous localization and mapping (SLAM) with sensor handover

In this work, we examine the classic problem of robot navigation via visual simultaneous localization and mapping (SLAM), but introducing the concept of dual optical and thermal (cross-spectral) sensing with the addition of sensor handover from one to the other. In our approach we use a novel combination of two primary sensors: co-registered optical and thermal cameras. Mobile robot navigation is driven by two simultaneous camera images from the environment over which feature points are extracted and matched between successive frames. A bearing-only visual SLAM approach is then implemented using successive feature point observations to identify and track environment landmarks using an extended Kalman filter (EKF). Six-degree-of-freedom mobile robot and environment landmark positions are managed by the EKF approach illustrated using optical, thermal and combined optical/thermal features in addition to handover from one sensor to another. Sensor handover is primarily targeted at a continuous SLAM operation during varying illumination conditions (e.g., changing from night to day). The final methodology is tested in outdoor environments with variation in the light conditions and robot trajectories producing results that illustrate that the additional use of a thermal sensor improves the accuracy of landmark detection and that the sensor handover is viable for solving the SLAM problem using this sensor combination.

Concurrent Initialization for Bearing-Only SLAM

Simultaneous Localization and Mapping (SLAM) is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors have a large impact on the algorithm used for SLAM. Early SLAM approaches focused on the use of range sensors as sonar rings or lasers. However, cameras have become more and more used, because they yield a lot of information and are well adapted for embedded systems: they are light, cheap and power saving. Unlike range sensors which provide range and angular information, a camera is a projective sensor which measures the bearing of images features. Therefore depth information (range) cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features system-initialization in order to enable the use of bearing sensors (as cameras) in SLAM systems. In this work a novel and robust method, called Concurrent Initialization, is presented which is inspired by having the complementary advantages of the Undelayed and Delayed methods that represent the most common approaches for addressing the problem. The key is to use concurrently two kinds of feature representations for both undelayed and delayed stages of the estimation. The simulations results show that the proposed method surpasses the performance of previous schemes.

A Virtual Range Finder based on Monocular Vision System in Simultaneous Localization and Mapping

This paper presents a virtual range finder model with the monocular vision system for simultaneous localization and mapping (SLAM). It relaxes the constraint often cited in the literature that the motion of the optical axis has to be parallel, and reduces the errors for range extraction by a single camera. This model could also provide a supplementary range measurement for landmark initialization in bearing-only SLAM. As the sensor data transformation from pixel to metric value is a nonlinear process, the uncertainty for observation model adopted in Extended Kalman Filter (EKF) SLAM framework can not be in the Gaussian form, which probably makes difficult for data association and SLAM. Concerning this problem, we present a new data association technique based on the homography transformation by a sequence of images and integrate it into the update process of the EKF to assist the innovation computation. The experimental results on real data validated the performance of the virtual range finder model and the new data association approach.