Beam Steering Capability Research Articles

Design of a square-horn hybrid plasmonic nano-antenna array using a flat lens for optical wireless applications with beam-steering capabilities

This paper introduces a Hybrid Plasmonic Nano-Antenna (HPNA) with a gradient-index dielectric flat lens modeled with different materials to enhance and steer the radiation in a particular direction based on a phase shift array. Firstly, the design of hybrid plasmonic Nano-Antenna (NA) is introduced and analyzed considering different horn-shapes such as diamond, hexagonal, circular, rectangular, and square shapes. The commercial software Computer Simulation Technology-Microwave Studio (CST-MWS) is used to analyze the radiation characteristics of the plasmonic NAs at the standard telecommunication wavelength of 1,550 nm. The produced horn-shaped nano-antenna made up from gold cladding with low- and high-index dielectric materials of SiO2 and InGaAs, respectively. The gain of the Square Horn shape Hybrid Plasmonic Nano-Antenna (SHHPNA) achieves the greatest gain with a value of 10.7 dBi at the desired frequency and the return loss reached -18.09 dB due to the wide aperture area for SHHPNA, which results in a narrower beam-width and higher gain. Moreover, by using two different shapes of dielectric flat lens to enhance the antenna’s performance by improving directivity while correspondingly reducing beam-width, the gain is enhanced and reaches 16.7 for SHHPNA with a circular lens and 16.9 for SHHPNA with a rectangular lens compared with the traditional NA that equal to 9.03 dBi. The main lobe for SHHPNA with each lens is more directed, with Side Lobe Level (SLL) and Half Power Beam-Width (HPBW) of -13.1 dB and 16.5° for SHHPNA with a circular lens and -15.1 dB and 15.4° for SHHPNA with a rectangular lens, respectively. In addition, the array configuration was investigated, and the gain was found to be 21 dBi for the single row array of 4×1 and 23.2 dB for the array of 3×3. Moreover, the array of 4×1 and 3×3 with +90° showed gains of 18.6 dBi and 20.7 dBi, respectively, compared to traditional paper with gains of 11.20 dBi and 13.1 dBi.

Beam steerable MIMO antenna based on conformal passive reflective metasurface for 5G millimeter wave applications

A conformal reflective metasurface fed by a dual-band multiple-input multiple-output (MIMO) antenna is proposed for low-cost beam steering applications in 5G Millimeter-wave frequency bands. The beam steering is accomplished by selecting a specific port of MIMO antenna. Each MIMO port is associated with a beam that points in a different direction due to a conformal reflective metasurface. This novel conformal metasurface antenna design has the advantages of higher gain, lower cost, a simpler feeding source, and a lower profile when compared to traditional reflective metasurfaces using bulky horn antennas and phased arrays with complex feeding networks and phase shifters for beam steering. The proposed beam steering antenna consists of a compact five-element dual-band MIMO and a 32×32\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$32 \ imes 32$$\\end{document} unit-cell conformal dual-band reflective metasurface placed at the top of the MIMO antenna to obtain the beam steering capability as well as gain enhancement. The proposed reflective metasurface has a stable response under oblique incidence angles of up to 600\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$60^0$$\\end{document} at 24 GHz and 38 GHz and its symmetric, single-layer structure, ensures polarization insensitivity and stable response under conformal conditions. The presented MIMO antenna design is not only compact but also offers a wideband response effectively covering the desired 5G mm-wave frequency bands. The overall size of the MIMO antenna alone is 70 ×\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ imes$$\\end{document} 12 mm2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {mm}^2$$\\end{document} with a maximum gain of 5.4 and 7.2 dB. It is further improved up to 13.1 and 14.2 dB at 24 and 38 GHz respectively, with a beam steering range of ś400\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$40^0$$\\end{document} by using a conformal reflective metasurface. Unlike the existing beam steering strategies, the suggested method is not only cost-effective but also increases the overall directivity and gain of the source MIMO antenna. The measured results agree with the simulated results, making it a potential candidate in the 5G and beyond beam steering applications.

A tunable 3×5 Nolen matrix for sidelobe-reduced and beamforming applications

A methodology of designing a 3×5 Nolen matrix with non-uniform power distribution is proposed in this paper. Several tunable phase shifters are designed to realize the capability of continuous beam steering. Additionally, two power dividers are integrated with a 3×5 Nolen matrix to produce the desired non-uniform power distribution, thereby reducing the sidelobe levels. In order to establish the appropriate power divider ratios, this paper thoroughly examines the correlation between power ratio at each port and different loss scenarios as well as Chebyshev distribution. An experimental Nolen matrix prototype has been designed and fabricated to confirm the efficacy of our proposed approach. The fabricated 3×5 Nolen matrix prototype offers continuous beam steering and achieves sidelobe levels below −22 dB.

A Broadband Dual-Polarized Reconfigurable Transmitarray With Sum and Difference Beam-Steering Capabilities

A Broadband Dual-Polarized Reconfigurable Transmitarray With Sum and Difference Beam-Steering Capabilities

CUSTR- A VHF phased array radar for observation of atmospheric dynamics and ionospheric plasma irregularities

A VHF phased array radar for atmospheric dynamics observation is installed at the University of Calcutta, Kolkata. The Calcutta University Stratosphere-Troposphere Radar (CUSTR) operates at 53 MHz with 475 three sub-element Yagi-Uda antenna array. The CUSTR system is a high-power fully active phased array system with a dedicated 2 kW solid-state Transmit-Receiver Module (TRM) attached to each antenna, providing a total peak power of 950 kW with 47.5 kW average power at 5% maximum duty ratio. The system provides electronic beam steering capability to steer the beam 360° in azimuth direction with a maximum off-zenith angle of 40°. The array is configured with 25 sub-arrays and operates either in a combined mode in Doppler Beam Swinging or in Spaced Antenna mode using a multi-channel digital receiver system. The TRM has been designed to provide a very short pulse of 0.5 µs and a long pulse of 128 µs. The system description along with the initial scientific observations such as atmospheric boundary layer, troposphere-lower stratosphere wind measurements along with preliminary wind validation, mesosphere echoes and ionosphere irregularities are presented.

Design of reconfigurable Huygens metasurfaces based on Drude-like scatterers operating in the epsilon-negative regime

In this study, we investigate the feasibility of designing reconfigurable transmitting metasurfaces through the use of Drude-like scatterers with purely electric response. Theoretical and numerical analyses are provided to demonstrate that the response of spherical Drude-like scatterers can be tailored to achieve complete transmission, satisfying a generalized Kerker's condition at half of their plasma frequency. This phenomenon, which arises from the co-excitation of the electric dipole and the electric quadrupole within the scatterer, also exhibits moderate broadband performance. Subsequently, we present the application of these particles as meta-atoms in the design of reconfigurable multipolar Huygens metasurfaces, outlining the technical prerequisites for achieving effective beam-steering capabilities. Finally, we explore a plausible implementation of these low-loss Drude-like scatterers at microwave frequencies using plasma discharges. Our findings propose an alternative avenue for Huygens metasurface designs, distinct from established approaches relying on dipolar meta-atoms or on core-shell geometries. Unlike these conventional methods, our approach fosters seamless integration of reconfigurability strategies in beam-steering devices.

A metasurface antenna with beam steering capabilities for radio frequency energy harvesting

Limited control over parameters within the realm of design complexity, it is noted that there are incomplete unit cells displaying slightly lower transmittance in transmissive metasurface antennas. However, traditional methods require time-consuming iterative processes to select unit cells with multiple variables. Therefore, a novel approach is proposed for designing metasurface superstrates on patch antennas operating at 12.5 GHz, focusing on achieving beam steering capabilities and Radio Frequency (RF) energy harvesting functionality. It utilizes a Skeleton-based Attentions Neural Network (SANN) to aid in the complex metasurface unit cell design, enhancing the antenna's flexibility and potential applications. This network is trained to generate patterns for the metasurface unit cell, facilitating accurate and efficient design. The key feature of this antenna is beam steering in multiple directions. Steering is achieved by rotating the metasurface plane in an anti-clockwise direction. Experimental results show that by rotating the metasurface plane at different angles, the beam is directed towards specific directions, such as 10°, 15°, 18°, 21°, and 23°. A load resistance of 8kᾨ and a full wave rectifier with a Positive-Intrinsic-Negative (PIN) diode are utilized to obtain a Direct Current (DC) output voltage of 1.1 V in the proposed rectifier. Copper material is used for the metasurface plane, and the antenna is measured using RT duriod.

Terminal-Matched Topological Photonic Substrate-Integrated Waveguides and Antennas for Microwave Systems.

In engineered photonic lattices, topological photonic (TP) modes present a promising avenue for designing waveguides with suppressed backscattering. However, the integration of the TP modes in electromagnetic systems has faced longstanding challenges. The primary obstacle is the insufficient development of high-efficiency coupling technologies between the TP modes and the conventional transmission modes. This dilemma leads to significant scattering at waveguide terminals when attempting to connect the TP waveguides with other waveguides. In this study, a topological photonic substrate-integrated waveguide (TPSIW) is proposed that can seamlessly integrate into traditional microstrip line systems. It successfully addresses the matching problem and demonstrates efficient coupling of both even and odd TP modes with the quasi-transverse electromagnetic modes of microstrip lines, resulting in minimal energy losses. In addition, topological leaky states are introduced through designed slots on the TPSIW top surface. These slots enable the creation of TP leaky-wave antennas with beam steering capabilities. A wireless link based on TPSIWs are further established that enables the transmission of distinct signals toward different directions. This work is an important step toward the integration of TP modes in microwave systems, unlocking the possibilities for the development of high-performance wireless devices.

Design of Staggered Halbach EMAT to Generate SH Guided Wave in Pipe Structures

This research investigates the application of Staggered Electromagnetic Acoustic Transducer (EMAT), mainly focusing on the beam steering capabilities of Shear Horizontal (SH) Guided Waves in pipe structures. As a specific case of EMAT, Staggered EMAT introduces a lateral movement in the magnet rows so that the wave propagation occurs at an angle. A three-dimensional model of double row Staggered Halbach EMAT is developed and a finite element analysis is carried out in an aluminium pipe with high radius to thickness ratio. To obtain better signal-to-noise ratio (SNR), the size of the magnets and the number of magnets in a row are optimized by studying multiple cases. For all the configurations, the in-plane surface displacement is studied keeping the wavelength of the transducer constant. The corresponding frequency is derived from the dispersion curve for SH0 wave mode. The results shows that there is significant increase in the amplitude of the in-plane surface displacement with the increase in magnet height and the number of magnets in a row, ultimately leading to the signal with higher amplitude and better SNR. The study then analyses Staggered Halbach EMATs where the second row of magnets is displaced by the maximum value of half of the wavelength. The interference between the waves generated from the two magnet rows resulted in the directivity change of the guided wave, thereby achieving the steering of the SH wave by the maximum value of 27°. The finding of this study shows the enhanced beam steering capabilities of Staggered EMATs, particularly in the field of pipeline monitoring and can lead to more precise and effective detection of structural defects. Keywords: Staggered Halbach EMAT, Beam Steering, SH Guided Wave, Pipeline Inspection

Compact fully metallic multi‐mode waveguide antenna for cellular communications

AbstractThe needed isolation between elements for high‐performance beam steering array antennas is a challenging task especially when the distance between the antenna elements is reduced. To tackle this problem, the authors report a multi‐port multi‐mode single‐antenna with beam steering capability (±7 deg) suitable for cellular communications. The multi‐port multi‐mode characteristic of the proposed antenna enables size reduction and better taper efficiency than antenna arrays operating in the 3.3–3.7 GHz cellular band. The reported antenna exploits four Transverse Electric modes to modify the half‐power beamwidth of the radiation from 20° to 41° as required in cellular communication.

Low-loss vanadium dioxide-enabled mmWave tunable reflective electromagnetic surface with complementary unit cells for wave manipulation

This study presents a novel implementation of vanadium dioxide (VO2) phase change material in an electromagnetic (EM) surface with beam steering capabilities. For the first time, we present the design, fabrication, and measurement of a globally actuated, VO2-based beamforming reflective EM surface. We propose a design featuring complementary unit cells that enable beam steering with a single excitation, marking a pioneering use of low-loss VO2 in creating a complementary EM surface for the mmWave band. The unit cells incorporating VO2 exhibit low-loss characteristics, with −0.92 and −1.9 dB in the hot state and −0.49 and −0.25 dB in the cold state, respectively. We incorporate both positive and negative phase variants alongside two temperature-independent phase unit cells. The complementary design enables us to utilize two beam operating states, effectively exploiting the otherwise unused cold state. We experimentally demonstrated beamforming at ±5° and ±10° from the broadside. In the case of ±10°, the measured gains at 35 GHz in the cold and hot states were 19.4 and 20.3 dB, respectively, which aligned well with the simulated gains of 20.9 and 21.5 dB. Manipulation of the electromagnetic wave direction with a single excitation has the potential for imaging, sensing, and communication applications. The complementary unit cell design methodology can be further adapted for mmWave beamforming, absorbing, and cloaking reconfigurable EM surfaces. Furthermore, the use of VO2 can be extended up to sub-THz frequencies due to the wideband, low-loss characteristics compared with conventional reconfigurable devices, such as PIN diodes or MEMS switches.

Design and Measurement of a Two-Dimensional Beam-Steerable Metasurface for Ka-Band Communication Systems

This study introduces a steerable metasurface reflector designed for the Ka-band, enabling one-dimensional and two-dimensional beam steering. The paper elaborates on the design considerations, manufacturing process, and experimental findings. The unit cell design incorporates a Varactor diode as the tuning element, facilitating a dynamic phase range exceeding 300° with minimal metasurface beam steering losses. Notably, the experimental results are in good agreement with the simulation outcomes. The advantages of employing this metasurface reflector include rapid beam steering, cost-effective production implementation, support for both one-dimensional and two-dimensional beam steering, low reflection loss, high-resolution beam steering, and continuous beam steering capabilities.

Optical Design of a Wavelength Selective Switch Utilizing a Waveguide Frontend with Beamsteering Capability

Optical Design of a Wavelength Selective Switch Utilizing a Waveguide Frontend with Beamsteering Capability

Development of Low Latitude Long Range Ionospheric Radar for Observing Plasma Bubble Irregularities and Preliminary Results

AbstractThe Low lAtitude long Range Ionospheric raDar (LARID), which consists of two high frequency (HF) radars looking toward the east and west of Hainan Island, respectively, has been developed and installed at Dongfang (19.2°N, 108.8°E, dip lat. 13.8°N), China. This paper describes the system design of LARID and its first observational results of equatorial plasma bubble (EPB) irregularities. The antenna array of LARID is composed of a west‐looking array and an east‐looking array. Each array consists of 20 log‐periodic antennas for transmission and reception and 4 log‐periodic antennas for interferometry, and has a beam steering capability in the azimuth angles of ±24° due the boresight pointing east (or west). Observational results show that the LARID is capable of detecting backscatter echoes from EPB irregularities and the ground, with a distance of 4,000 km or more away from Hainan Island. Multiple EPB structures were continuously observed on 17 April 2023, with eastward drifts ranging between 70 and 130 m/s. Based on ray tracing simulations, the backscatter echoes of EPB irregularities were due to the 0.5‐hop and 1.5‐hop propagation modes. The distances between the successive EPB structures were estimated ranging between 500 and 900 km in longitude. The LARID observations, together with other instruments in the East and Southeast Asian sector, provided a clear picture of longitudinal variation of EPBs in 90–125°E. It is expected that the LARID will provide an important tool to study the generation and evolution of EPBs and their short‐term prediction in East and Southeast Asia.

Complete Complementary Coded Excitation Scheme for SNR Improvement of 2D Sparse Array Ultrasound Imaging.

Driving the numerous elements of 2D matrix arrays for 3D ultrasound imaging is very challenging in terms of cable size, wiring and data rate. The sparse array approach tackles this problem by optimally distributing a reduced number of elements over a 2D aperture while preserving a decent image quality and beam steering capabilities. Unfortunately, reducing the number of elements significantly reduces the active probe footprint reducing as a consequence the sensitivity and at the end the signal-to-noise ratio. Here we propose a new coded excitation scheme based on complete complementary codes to increase the signal-to-noise ratio in 3D ultrasound imaging with sparse arrays. These codes are known for their ideal auto-correlation and cross-correlation properties and have been widely used in Code-Division Multiple Access systems (CDMA). An algorithm for generating such codes is presented as well as the adopted imaging sequence. The proposed method has been compared in simulations to other coded excitation schemes and showed significant increase in the signal-to-noise ratio of sparse arrays with no correlation artifacts and no frame rate reduction. The gain in signal-to-noise ratio compared to the case where no coded excitation is used was around [Formula: see text] and the contrast was also improved by [Formula: see text] while the resolution was unchanged.

Pattern reconfigurable antenna with two-dimensional beam steering capability using metasurface

A two-dimensional (2-D) beam steering pattern reconfigurable antenna with an active partially reflecting surface (PRS) is presented in this paper. The proposed design incorporates a U-slot patch antenna functioning as a radiator and a superstrate composed of an active PRS layer. The PRS superstrate layer consists of 6 × 6 unit cells, divided into four sections, each comprised of 3 × 3 unit cells. To achieve reconfigurability, each unit cell within the PRS layer is loaded with two PIN diodes. Phase inconsistency can be introduced by changing the states of the PIN diode at different sections, which causes the PRS antenna to change the direction of its main beam. By controlling the operating states of PIN diodes within each unit cell, a total of sixteen radiation patterns can be generated. The proposed antenna supports 2-D beam steering in both the xz- and yz-planes, allowing for a maximum steered angle of ±40°. The performance of the fabricated antenna is experimentally verified at an operating frequency of 3.5 GHz. The proposed antenna is suitable for the 5G NR frequency band n78 and operates within the frequency range of 3.3 to 3.8 GHz.

Linear Phased Metamaterial Incorporated Patch Antenna Array at 28 GHz for 5G Base Stations

This article presents a 1×6 linear phased antenna array implemented with metamaterial incorporated patch antennas for 5G base stations. The single element antenna was modelled on Rogers RT/duroid 5880 substrate in the dimensions of 7.8×7.8×0.254 mm3 with metamaterial incorporated partial ground plane and complementary metamaterial incorporated patch. This metamaterial incorporated antenna structure is resonating in 22.03–33.55 GHz at central frequency of 28 GHz with 40% impedance bandwidth with respect to the –10 dB return losses. With aim to design a radiating structure for 5G base stations and in order to enhance the gain, a six element phased array was developed using the abovementioned single element antenna with inter element spacing 7.8 mm between the adjacent antenna elements. In the analysis of this phased array, we observed acceptable diversity parameters (isolation, ECC, DG, CCL, and MEG) and presented beam steering capabilities by changing the phase difference between the adjacent ports. The proposed six element phased array antenna is capable to steer the beam to ±43.5° and capable to cover 5G NR n-257, n-258 and n-261 bands with significant gain and efficiency.

Wide-angle non-uniform optical phased array using compact and efficient antenna design

In the need for a more compact and efficient optical phased array with a wide steering beam for LIDAR applications, a wide steering array with high resolution is desirable. However, in the published work, a trade-off is often made for one over another. Apodized grating antennas have shown good efficiency with a compact size and wide beam profile, which improve optical phased array beam steering capability and are also compatible with the CMOS silicon photonics process. A promising studies shows enhancement in steering range with good resolution utilizing a non-uniform optical phased array. In this work, we present two highly efficient optical antennas with 94% and 93.5% upward power at the center frequency for the first and second antenna respectively, exceeding state-of-the-artwork to the best of our knowledge, and wide full-width half maximum of 8.88° x 78.05° and 7.53° x 69.85° in elevation and azimuthal planes, respectively. Both antennas provide a broad bandwidth across the 1400–1700 nm wavelength range with more than 80% efficiency in the S, C, and L bands. To overcome the limited scan ranges and small aperture size, a two-dimensional non-uniform array of 10 × 10 elements is utilized to increase the beam steering capability. A genetic algorithm is used to optimize the position of array elements, resulting in an aliasing-free array with a wide steering range of 160° with beam width 0.5° and consistent −11 dB maximum side lobe level across the steering range.

Design of a Compact and Minimalistic Intermediate Phase Shifting Feed Network for Ka-Band Electrical Beam Steering.

Intermediate phase shifting is a footprint- and cost-reduction technique for reconfigurable feed networks. These feed networks are utilized in antenna arrays to perform electrical beam steering. In intermediate phase shifting, a phase shifter is shared between two adjacent antennas. Conventionally, antennas only have individual phase shifters. With shared phase shifters, we reduce the number of components and the footprint by 25%. Consequently, this decreases the price and enables designs at millimeter-wave frequencies where space is limited due to frequency-dependent antenna spacing. This intermediate phase shifting is demonstrated by designing a reconfigurable feed network for the Ka-band that generates a continuous phase shift profile for beam steering. Due to the use of varactors and a novel biasing method, it does not require expensive beamformer integrated chips or lumped components for biasing. The feed network is combined with a 4 × 4 antenna array to demonstrate its beam-steering capabilities. The result is a high-density and minimalistic design that fits in a small volume of 25.6 × 25.6 × 0.95 mm3. With this small antenna array, the main beam is steered at ±40∘ broadside, providing full 1D and restricted 2D steering. It is a potential candidate for wireless sensor and mobile networks.

Simultaneous generation and manipulation of terahertz waves based on nonlinear leaky-waveguide antennas with integrated bianisotropic metasurfaces.

We hereby propose and theoretically investigate a new scheme for simultaneous generation and manipulation of terahertz (THz) waves through difference frequency generation facilitated by a metasurface-assisted nonlinear leaky waveguide antenna. The proposed structure integrates a nonlinear optical waveguide, composed of multiple AlxGa1-xAs layers, with a THz leaky waveguide, wherein a bianisotropic metasurface realizes the radiating aperture. By explicitly utilizing the electric, magnetic, and magnetoelectric coupling responses of the metasurface, we demonstrate that the generated THz wave can be induced as a tightly confined, phase-matched guided mode for efficient generation of the THz wave. Additionally, this approach allows the THz wave to be transformed into a directive beam, radiating at a user-defined leakage rate and direction. Our numerical analyses suggest that THz beams ranging from 2.85 THz to 3.05 THz can be steered from 4 ∘ to 40 ∘, utilizing the inherent beam-steering capabilities of the leaky-waveguide antenna. Within this THz frequency spectrum, the phase matching condition is achieved by adjusting the optical wavelengths between 1.6μm and 1.52μm. In particular, the nonlinear conversion efficiency is 2.9 × 10-5 [1/W] at 3 THz.