Beam Current Density Research Articles

Study of the Possibility of a Stable Increase in the Electron Beam Current Density Using a Tapered Glass Channel

Study of the Possibility of a Stable Increase in the Electron Beam Current Density Using a Tapered Glass Channel

The frequency spectrum and energy content in a pulse flux of terahertz radiation generated by a relativistic electron beam in a plasma column with different density distributions

This paper reports on the generation of a directed flux of electromagnetic radiation with an energy content of 10 J in the frequency range of 0.2—0.3 THz at a microsecond pulse duration in a beam-plasma system. The flux is generated when a relativistic electron beam (REB) pumps electron plasma waves in a magnetized plasma column. In the described experiments, this fundamentally new approach to generate terahertz radiation was carried out at the GOL-PET facility in the conditions of varying the beam current density and the plasma density in the appropriate ranges of 1—2 kA/cm2 and 1014—1015 cm−3. From the comparison of the flux energy spectrum measured experimentally in the frequency range 0.15—0.45 THz with the calculated one obtained using the previously proposed model of radiation generation in a beam–plasma system, it was shown that this process occurs through resonant pumping by REB of precisely the branch of upper-hybrid plasma waves. Mastering this new method to generate terahertz radiation opens the prospect of its use to obtain multi-megawatt radiation fluxes in the frequency range up to 1 terahertz and higher. For such a development approach the most promising beam for pumping plasma oscillations seems to be a kiloampere REB generated in a linear induction accelerator.

Design, development and test of single beamlet microwave ion source with spot-dense plasma system

In this paper, an efficient ion source with unique characteristics is introduced and proposed. It outlines the generation of a spot-dense plasma just below the plasma electrode aperture of the extractor system through the utilization of a 2.45 GHz microwave plasma source with a power of 1000 W, in the absence of a magnetic field. This source utilizes a 2.45 GHz microwave plasma generator operating at 1000 W, resulting in the generation of a spot-dense plasma just below the plasma electrode aperture of the extractor system, all achieved without the need for a magnetic field.The spot-dense plasma results in the extraction of an ion beam with high current density. Furthermore, the suggested ion source can be utilized in a smaller size using a higher frequency. Therefore, our findings indicate that the proposed method not only substantially enhances the extracted positive ion beam current but also significantly reduces the size of the ion beam source system. Based on the design and simulation results, an experimental model of the ion beam source is constructed. The diagnostic tools provided the beam current density and system efficiency values of 99mA/cm2 and 7×10−6A/W, respectively.

Large size shielded metal-ceramic cathodes

The technology for manufacturing large size shielded metal-ceramic cold cathodes is described. It has been shown that the use of a shielded metal-ceramic cathode allows to significantly increase the impedance of the vacuum diode and to form an electron beam of constant cross-sectional size or of the required size (up to 400 mm wide) with a fairly uniform electron beam current density distribution (≤15%).It has been found that the emission decline of the shielded metal-ceramic cathode, like that of the metal-dielectric cathode operating at a high repetition rate (≥100 pps), is significant at the beginning of the process and then slows down, allowing continuous operation for up to 40 h. Both cathodes require periodic cleaning of the plates, which is more difficult for metal-ceramic plates.At the same time, a metal-ceramic cathode works better at low vacuum, allowing twice as much current to be generated (in the same geometry) as a metal-dielectric cathode, while reducing the accelerating voltage by ∼15%. However, metal-ceramic plates are about 100 times more expensive to manufacture than dielectric plates for a metal-dielectric cathode.Therefore, the choice of cathode type for vacuum diode accelerators is not a trivial problem, but depends on many factors that must be taken into account in each case and for each radiation technology.

Transient Superhydrophilic Surface Modification of Polyimide by Metal Ion Beam Irradiation.

Polyimide is commonly used as a substrate for flexible electronic devices because of its excellent thermal, physical, and electrical properties. To enhance the adhesion between substrates and electrodes, it is necessary to improve the hydrophilic properties of the polyimide. Various surface treatments, such as plasma treatment, laser ablation, and ultraviolet treatments, have been applied for this purpose. In this study, we demonstrated that Cu and Ti ion beam irradiation can temporarily create a superhydrophilic surface on polyimide after irradiation. When Cu or Ti ions bombarded the polyimide, the contact angle changed systematically with the beam current density and over time. We present atomic force microscopy (AFM) data for polyimide irradiated with Cu and Ti ions at different beam current densities and discuss the possible mechanisms behind the changes in the contact angle.

Technical Project of the Ion Beam Diagnostics System in Phase Space

Increasing requirements for modern acceleration complexes require precise data on ion beams injected into the accelerator. This paper presents a system of ion beam diagnostics that implements the four-slit method and makes it possible to measure the beam current density distribution in the four-dimensional phase space (PS) with high precision. Technical solutions and design features aimed at obtaining the design parameters of the system are described: the range of investigated beam currents from 1 pA to 20 mA with energy up to 50 keV, spatial resolution from 6 mm to 50 μm.

Frequency Spectrum of Radiation Flux Generated by Beam-Plasma System with Ten Joules Energy Content in Microsecond Pulse

The work reports the achievement of an energy content of 10 J per microsecond pulse in a directed flux of electromagnetic radiation in the frequency range of ~ 0.2–0.3 THz. The flux is generated by a fundamentally new method, which is realized through the pumping of upper-hybrid plasma oscillations in a magnetized plasma column with a relativistic electron beam (REB) and their subsequent transformation into a flux of electromagnetic radiation. In the described experiments at the GOL-PET facility, this method to generate THz radiation is implemented in the following way a beam of electrons with energy E ~ 0.5 MeV with a current density of (1–2) kA/cm2 is passing through a magnetized (4 T) plasma column with a density of 1014–1015 cm–3. By comparing the experimentally measured spectral composition of the radiation flux with the calculated spectrum, it is proved that this process is realized through resonant pumping of the branch of upper-hybrid plasma waves by such beam. A coordinated increase in plasma density and beam current density opens up the prospect of advancement in the generation of multi-megawatt radiation fluxes in the region of one terahertz.

Electron heating mode in magnetic field diffusion region of microwave discharge ion thruster

In magnetic field design principle of microwave discharge ion thruster, it is universally received that enlarging the magnetic mirror region can confine more electrons to acquire better energy utilization rate, while reducing the magnetic field diffusion region can prevent electrons from losing at wall to reduce the discharge loss. However, recently the integrated simulation proposes a hypothesis that electrons can also be heated in the magnetic field diffusion region when the Child-Langmuir sheath is considered as a constraint condition for electrons. Therefore, herein a magnetic field structure for the magnet array microwave discharge ion thruster is designed to verify the hypothesis, in which the magnetic field diffusion region is located near the screen grid. Then, an integrated simulation is conducted for studying the initial discharge and ion beam extraction stages of the thruster. The simulation results show that in the magnetic field diffusion region, the electron temperature is 4–8 eV when the grid system voltage is not applied, while the electron temperature is 4–12 eV when the the grid system voltage is applied. And the plasma density in the latter case has one order of magnitude higher than that in the former case. It means that electrons are obviously heated in the magnetic field diffusion region when they are confined among the Child-Langmuir sheath, the plasma sheath at antenna surface, and magnetic mirror. This electron heating mode produces more high-energy electrons outside the magnetic mirror region to generate plasma in front of the grid system, which can significantly increase the plasma density and ion beam current density. The result shows that under the conditions of 0.3 sccm (1 sccm = 1 mL/min) xenon gas flow, 1 W input microwave power, 300 V screen grid voltage and –50 V acceleration grid voltage, the ion beam current and its density are 0.47 mA and 0.60 mA/cm<sup>2</sup> for the magnet array microwave discharge ion thruster, while the ion beam current and its density are 1.2 mA and 0.38 mA/cm<sup>2</sup> for the 2-cm microwave discharge ion thruster. The ion beam current density increases by 57.9%. Through the integrated simulation, a new electron heating mode in the magnetic field diffusion region is proved theoretically, which provides a theoretical basis for the magnetic field structure optimization of microwave discharge ion thruster.

INFLUENCE OF ELECTRON IRRADIATION ON THE CRYSTAL STRUCTURE, SURFACE MICRORELIEF AND BANDGANP WIDTH OF THE TRIPLE CRYSTALS OF IRON DOPED MONOSELINIDE OF THALLIUM AND INDIUM

In this work, the effect of electron irradiation on the structure, surface morphology and band gap of single-and polycrystalsof iron-doped ternary crystals of thallium and indium monoselinides was investigated. It has been established that the synthesized polycrystalline samples, as well as the grown single crystals of thallium and indium monoselinides, are single-phase. The crystals have a tetragonal unit cell (space group I4/mcm) with the following lattice parameters: a ~ b = 8.12 Å, c = 6.88 Å, α=β=γ= 90°. Irradiation with electrons with an energy of 2 MeV and a beam current density of 0.085 μA/cm2leads to changes in the structure and properties of crystals in a complex manner depending on the electron fluence. Leads to a change in the parameters of the crystal lattice, an increase in the maximum value of the arithmetic mean deviation of the profile, as well as a decrease inthe height of the average surface roughness of the irradiated crystals. Irradiation of a powder sample with electrons with a fluence of 5x1016electron/cm2helps to increase the size of nanocrystallites from 32.50 nm to 43.33 nm.

Reduction of Inhomogeneity of the Beam Current Density in the Atmosphere in an Electron Accelerator Based on a Non-Self-Sustained HVGD

Reduction of Inhomogeneity of the Beam Current Density in the Atmosphere in an Electron Accelerator Based on a Non-Self-Sustained HVGD

Simulation study of a novel small animal FLASH irradiator (SAFI) with integrated inverse-geometry CT based on circularly distributed kV X-ray sources

Ultra-high dose rate (UHDR) radiotherapy (RT) or FLASH-RT can potentially reduce normal tissue toxicity. A small animal irradiator that can deliver FLASH-RT treatments similar to clinical RT treatments is needed for pre-clinical studies of FLASH-RT. We designed and simulated a novel small animal FLASH irradiator (SAFI) based on distributed x-ray source technology. The SAFI system comprises a distributed x-ray source with 51 focal spots equally distributed on a 20 cm diameter ring, which are used for both FLASH-RT and onboard micro-CT imaging. Monte Carlo simulation was performed to estimate the dosimetric characteristics of the SAFI treatment beams. The maximum dose rate, which is limited by the power density of the tungsten target, was estimated based on finite-element analysis (FEA). The maximum DC electron beam current density is 2.6 mA/mm2, limited by the tungsten target's linear focal spot power density. At 160 kVp, 51 focal spots, each with a dimension of 2times 20 mm2 and 10° anode angle, can produce up to 120 Gy/s maximum DC irradiation at the center of a cylindrical water phantom. We further demonstrate forward and inverse FLASH-RT planning, as well as inverse-geometry micro-CT with circular source array imaging via numerical simulations.

Experimental study on beam characteristics of μHT-1 thruster under operating conditions adjustment

The micro Hall thruster μHT-1 is designed for space gravitational wave detection missions, and the beam characteristics of the thruster are studied by experiments. A Faraday probe mounted on a three-dimensional moving platform is designed for diagnosing to obtain the beam current density distribution, and the operating conditions of the discharge voltage and the mass flow rate are adjusted in the range of 700∼1200 V and 0.1–0.5 sccm, respectively. In addition, the study further analyze the variation trends of total beam current, discharge current, utilization rate, divergence angle and others. The test results indicate that the μHT-1 thruster can work stably in a wide range of operating conditions, and the beam current expresses a good axisymmetric distribution. Meanwhile, the beam current density gradually decreases along the axial direction and spreads along the radial direction. The current utilization efficiency fluctuates from 53.4 % to 67.7 % when the power is adjusted in the range of 1.45–5.76 W, and the divergence angle increases from 41.3° to 56.7°. The total beam current of the thruster shows a linear increase characteristics with the enhancing of the anode flow and the discharge voltage.

Characterization of transversely confined electron beam-generated plasma using two-dimensional particle-in-cell simulations

Electron beam-generated plasmas (EBPs) have been used to modify the surface properties. In certain applications, EBPs are transversely confined and their properties are of value to the treatment. In this paper, the characteristics of an electron beam-generated argon plasma, confined within a narrow gap, are investigated using a two-dimensional particle-in-cell simulation. The employed particle-in-cell/Monte Carlo collision model accounts for the electron and ion kinetics, as well as collisions between electrons and the background gas, including the elastic scattering, excitation, and impact ionization. Our simulations reveal a strong correlation between the plasma density and the beam density within the plasma bulk. The excitation of obliquely growing waves is observed, which is found to have a significant impact on the transport of beam electrons, thereby leading to the non-uniformities of plasma density and electron temperature. Specifically, the obliquely growing waves increase the local plasma density while reducing the electron temperature. These contrasting effects compensate for each other, and therefore, to some extent, smooth out the distributions of ion flux and energy flux. We further examine the variations of plasma parameters with respect to the beam current density, beam energy, and gas pressure. Increasing the beam current density or decreasing the beam energy results in higher plasma density and electron temperature, while increasing pressure leads to a higher plasma density but electron temperature scarcely changes. Based on the simulation results, we propose an approach to achieve independent control of the ion flux and energy flux by adjusting beam current density, beam energy, and pressure.

Continuous pulse advances in the negative ion source NIO1

Consorzio RFX and INFN-LNL have designed, built and operated the compact radiofrequency negative ion source NIO1 (Negative Ion Optimization phase 1) with the aim of studying the production and acceleration of H- ions. In particular, NIO1 was designed to keep plasma generation and beam extraction continuously active for several hours. Since 2020 the production of negative ions at the plasma grid (the first grid of the acceleration system) has been enhanced by a Cs layer, deposited though active Cs evaporation in the source volume. For the negative ion sources applied to fusion neutral beam injectors, it is essential to keep the beam current and the fraction of co-extracted electrons stable for at least 1 h, against the consequences of Cs sputtering and redistribution operated by the plasma. The paper presents the latest results of the NIO1 source, in terms of caesiation process and beam performances during continuous (6 ÷ 7 h) plasma pulses. Due to the small dimensions of the NIO1 source (20 cm×∅10 cm), the Cs density in the volume is high (1015 ÷ 1016 m-3) and dominated by plasma-wall interaction. The maximum beam current density and minimum fraction of co-extracted electrons were respectively about 30 A/m2 and 2. Similarly to what done in other negative ion sources, the plasma grid temperature in NIO1 was raised for the first time, up to 80 °C, although this led to a minimal improvement of the beam current and to an increase of the co-extracted electron current.

Solid-State Dewetting of Thin Silver Films into Spherical Nanoparticles under High-Current Pulsed Ion Beam Irradiation.

Noble metal nanoparticles (NPs) are important in many applications, including light trapping of photovoltaic cells, photoelectrochemical applications, etc. The present study reports the formation of silver NPs from the as-deposited silver coatings on fused silica substrates by solid-state dewetting induced by high-current intense pulsed ion beam (IPIB) irradiation. We described the effects of IPIB irradiation with different ion beam current densities and numbers of pulses on NP morphology and compared the results with conventional rapid thermal annealing (RTA). IPIB irradiation enables superfast heating (higher than 109 K/s) and cooling, providing a superfast annealing solid-state dewetting mechanism. Our results demonstrate that the sphericity of silver NPs is enhanced after IPIB irradiation relative to RTA-annealed silver NPs. Our results suggest further possibilities of shape and sphericity control of silver NPs with very fast heating/cooling annealing rates.

Characterization of cesium and H−/D− density in the negative ion source SPIDER

The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H−/D− ions, generated by a radiofrequency plasma source coupled to an ion acceleration system. A prototype of the ITER HNB ion source is being tested in the SPIDER experiment, part of the ITER Neutral Beam Test Facility at Consorzio RFX. Reaching the design targets for beam current density and fraction of coextracted electrons is only possible by evaporating cesium in the source, in particular on the plasma facing grid (PG) of the acceleration system. In this way the work function of the surfaces decreases, significantly increasing the amount of surface reactions that convert neutrals and positive ions into H−/D−. It is then of paramount importance to monitor the density of negative ions and the density of Cs in the proximity of the PG. Monitoring the Cs spatial distribution along the PG is also essential to guarantee the uniformity of the beam current. In SPIDER, this is possible thanks to the Cavity Ringdown Spectroscopy (CRDS) and the Laser absorption Spectroscopy diagnostics (LAS), which provide line-integrated measurements of negative ion density and neutral, ground state Cs density, respectively. The paper discusses the CRDS and LAS measurements as a function of input power and of the magnetic and electric fields used to reduce the coextraction of electrons. Negative ion density data are in qualitative agreement with the analogous measurements in Cs-free conditions. In agreement with simulations, Cs density is peaked in the center of the source; a top/bottom non uniformity is also present. Several effects of plasma on Cs deposition and negative ion production are presented.

Forevacuum plasma-cathode electron source for generation of a ribbon beam over a wide pressure range.

We describe the results of our investigations of the generation of a ribbon electron beam (10 × 220mm2) by a two-stage discharge system based on a hollow-cathode glow discharge plasma. The source design enables operation in the pressure range 2 × 10-2 to 10Pa. At a beam accelerating voltage of 8kV, the beam current is 450 mA at a pressure of 2 × 10-2Pa and 150 mA at a pressure of 10Pa. To achieve a uniform current density distribution of the beam over its cross-sectional area, a special design of emission electrode was employed. This enabled us to reduce non-uniformities of the beam current density distribution to a level of 10%.

Surface modification of collagen using low-energy noble gas ion implantation

Due to its versatility, biodegradability, and biocompatibility, collagen is an increasingly important building block for sustainable manufacturing. Consequently, it is becoming more important to develop methods to tune collagen's properties for a given application. We propose employing a tool often reserved to microelectronics, low-energy ion implantation, to modify the top surface of collagen sheets, increasing surface sp2 carbon without altering significantly the amide structure while retaining the bulk properties of collagen. Implantation of He+, Ne+, Ar+ and Xe+ was performed at varying energies from 5 to 25 keV, with beam current density from 5 × 10−2 to 5 μA cm−2. The resulting changes in chemical structure were investigated using Raman and FTIR spectroscopies. Monte Carlo simulations of the interaction of the ion beams with collagen are used to quantify the energy deposited in the implanted module. A model is proposed that relates the observed changes to these ion implantation conditions.

MODELING AND PRELIMINARY EXPERIMENTAL RESULTS OF THIN FILM HEATING DURING THE PASSAGE OF A HIGH-ENERGY ELECTRON BEAM

The preliminary experimental results as well as modeling the heating of thin-foil materials during the passage of high-energy electrons with energy of 15 MeV are presented. Foils of 50 μm titanium, 50 μm aluminum and 125 μm Kapton® were chosen as the test targets. A calculation technique has been developed, which consists of automating the finite difference method applying Python programming language tools. These tools allowed solving the problem of heat distribution in the thin foil, taking into account the ionization losses of the primary electron beam and the black body radiation. The data on the surface temperature distribution of the research samples were obtained. The time for establishing thermal equilibrium was determined taking into account the distribution of the electron beam current density. It is shown that optimization of the main parameters of the high-energy electron beam beam (for example the current density) makes it possible to neglect the thermal loads on these films, which was confirmed during bench tests at 30 MeV electron accelerator of the IHEPNP NSC KIPT.

The Research on the High-Current-Density Shielded Sheet Electron Beam Matching Focusing Magnetic Field

Increasing beam current density is a very effective approach to boost the output power in millimeter wave and terahertz vacuum devices. However, the current density of sheet electron beam (SEB) is severely limited, due to instabilities in the SEB transport, especially in the case of high current density. To overcome this limitation, a new approach for stably transporting a high-current-density SEB, named shielded SEB matching focusing magnetic field (shielded SEB-MFM), is presented in this article. This new focusing magnetic field consists of a small transverse magnetic field and a conventional shielded uniform magnetic field (shielded UM). Compared with the conventional shielded UM, about double the maximum beam current density can be transported by the shielded SEB-MFM, in the same strength as the magnetic field. In addition, an implementable scheme of an electron optical system based on the shielded SEB-MFM is designed and calculated to verify the feasibility of the shielded SEB-MFM. The results indicate that the SEB with a 636-A/cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{\text{2}}$</tex-math> </inline-formula> current density can be well focused by a 0.8-T shielded SEB-MFM in a 40-mm tunnel. To achieve the same expansion degree of thickness, the conventional shielded UM must be around 1.5 T.