Beak Shape Research Articles

Geometric morphometric analysis of beak shape of Columbimorphae (Columbas, Van, Mardin and Dönek).

Selective breeding over centuries has led to the emergence of numerous pigeon breeds from the single species Columba livia, showcasing unparalleled phenotypic diversity. In Eastern Turkey, Van pigeons originate, while Tumbler pigeon varieties thrive countrywide, reflecting local traditions. The avian beak, vital for survival, offers insights into domestication and traits influenced by natural selection. Geometric morphometrics, a shape analysis method, allows for a comprehensive examination of beak shapes among domestic pigeons, providing a nuanced understanding of their complexity. Understanding beak diversity in pigeons, especially those found in Turkey, enhances our knowledge of avian evolution and adaptation processes. The study utilized 48 skulls from 4 pigeon breeds, including wild rock pigeons and domestic pigeons of Tumbler, Mardin and Van breeds, all free from pathological lesions and adults. Geometric morphometric analyses of beak shape were conducted using dorsal and lateral photographs, with landmarks placed using tpsDig software. MorphoJ software facilitated procrustes analysis and principal component analysis (PCA) to assess morphological variability and differentiate pigeon breeds based on shape patterns, with significance set at p < 0.05. PCA revealed significant shape variations among pigeon breeds, with 47 principal components identified for lateral beak views and 36 principal components for dorsal views. Canonical variates analysis further distinguished morphological patterns among breeds, indicating distinct shape variations in both dorsal and lateral views, elucidating the unique characteristics of each breed's beak morphology. Our results demonstrate statistically significant differences in pigeon beak shape, particularly in the lateral view, confirming the importance of these variations (p < 0.05) and suggesting that such differences occur less than 5% of the time under the null hypothesis.

Differentiation of Acute Internal Carotid Artery Occlusion Etiology on Computed Tomography Angiography: Diagnostic Tree for Preparing Endovascular Treatment.

This study aimed to identify the imaging characteristics and discriminate the etiology of acute internal carotid artery occlusion (ICAO) on computed tomography angiography (CTA) in patients with acute ischemic stroke. We retrospectively evaluated consecutive patients who underwent endovascular thrombectomy for acute ICAO. Contrast filling of the extracranial ICA in preprocedural CTA was considered apparent ICAO. Non-contrast filling of the extracranial ICA was evaluated according to the contrast-filled lumen configuration, lumen margin and location, Hounsfield units of the non-attenuating segment, and presence of calcification or an intimal flap. Digital subtraction angiography findings were the reference standard for ICAO etiology and the occlusion site. A diagnostic tree was derived using significant variables according to pseudo-occlusion, atherosclerotic vascular disease (ASVD), thrombotic occlusion, and dissection. A total of 114 patients showed apparent ICAO (n = 21), pseudo-occlusion (n = 51), ASVD (n = 27), thrombotic occlusion (n = 9), or dissection (n = 6). Most pseudo-occlusions (50/51, 98.0%) showed dependent locations with ill-defined contrast column margins and classic flame or beak shapes. The most common occlusion site of pseudo-occlusion was the petro-cavernous ICA (n = 32, 62.7%). Apparent ICAO mainly appeared in cases with occlusion distal to the posterior communicating artery orifice. ASVD showed beak or blunt shapes in the presence of low-density plaques or dense calcifications. Dissection revealed flame- or beak-shaped appearances with circumscribed margins. Thrombotic occlusions tended to appear blunt-shaped. The decision-tree model showed a 92.5% overall accuracy. CTA characteristics may help diagnose ICAO etiology. We provide a simple and easy decision-making model to inform endovascular thrombectomy.

Bill shape variation in selected species in birds of prey.

At the top of many ecosystems, raptors, also known as birds of prey, hold major influence. They shape their surroundings through their powerful hunting skills and complex interactions with their environment. This study investigates the beak morphology of four prominent raptor species, Golden eagle (Aquila chrysaetos), Common buzzard (Buteo buteo), Peregrine falcon (Falco peregrinus) and Common kestrel (Falco tinnunculus), found in Türkiye. By employing geometric morphometric methods, we investigate shape variations in the beaks of these species to unravel the adaptive significance of their cranial structures. This analysis reveals distinct beak morphologies among the studied raptors, reflecting adaptations to their feeding habits, hunting techniques and ecological niches. The results from Principal component analysis and Canonical variate analysis demonstrate significant differences in beak morphology between the Falconiformes and Accipitriformes clades, as well as among all three groups. The overall mean beak shapes of Golden Eagles are quite similar to Common Buzzards, with both species having longer beaks. In contrast, Falcons exhibit a distinctly different beak morphology, characterized by wider and shorter beaks. Changes in beak shape can lead to changes depending on the skull. It is thought that skull shape variations among predator families may have an impact on beak shape. These findings highlight the importance of integrating morphometric analyses with ecological insights to enhance our understanding of the evolutionary processes shaping raptor beak morphology.

Characteristics of Several Qualitative Traits of Betet Chickens Raised by Fighting Cock Fans in Central Lombok

The study was conducted to determine the characteristics of betet chickens kept by fighting cock enthusiasts in Central Lombok. Determining the research area was carried out using the cluster sampling method, and sampling of farm was carried out non-randomly using the snowball method, and determining the number of chicken samples for observation was carried out using the accidental sampling method. Observations were made on 74 male Betet and 26 female Betet birds The variables observed were: body posture, feather color, beak color, beak shape, shank color and comb shape. The data obtained were tabulated, the frequency was calculated and analyzed using descriptive analysis. The results of the research found that the feather color of male betet chickens was dominated by bing (black), followed by green, brumbun and the smallest frequency of lurik colors. The feather color of female betet chickens was dominated by the alap color, followed by the kelawu color and the lowest frequency of the berumbun color. The highest frequency of beak color was yellow, followed by black, and the majority was sharply curved. The highest frequency of shank color in male betet chickens was yellow, followed by black and the lowest frequency was white. There were no white shanks found in female betet birds. The highest frequency of the comb shape for male betet chickens was without a comb because it is cut, followed by the single shape, then the lowest frequency was the pea shape. The majority of female betet chickens have a single comb, the rest do not have a comb (the comb does not develop). It was concluded that betet chickens kept by fighting cock enthusiasts

Geometric morphometrics casts light on phylogenetic relevance of cephalopod beak morphological.

The feeding organ of cephalopod species, the beak, can be used to reveal important ecological information. In this study, geometric morphometric approaches were employed to investigate the phylogenetic relevance and classification effect of beak lateral profile shape. The two-dimensional beak morphologies of 1164 pairs of 24 species from 13 genera and five families were constructed, and their evolutionary relationships and taxonomic status were confirmed using geometric morphometrics and molecular biology approaches. We also assessed the phylogenetic signals of beak shape. The analysis results show shape variation in the beak mainly in the rostrum, hood, and lateral wall. The overall shape parameters (all PCs) of the upper and lower beak are more useful for species identification. The shapes of the upper and lower beak show a strong phylogenetic signal, and the phenogram based on the beak shape basically reflected the families' taxonomic positions. We also hypothesized that the shape variation in the beaks of cephalopods may be ascribed to genetic and environmental differences. In summary, beaks are a reliable material for the classification of cephalopod species. Geometric morphometric approaches are a powerful tool to reveal the identification, phylogenetic relevance and phenotypic diversity of beak shape in cephalopods.

Genetic parameter estimation and molecular foundation of chicken beak shape

The bird beak is mainly functioned as feeding and attacking, and its shape has extremely important significance for survival and reproduction. In chickens, since beak shape could lead to some disadvantages including pecking and waste of feed, it is important to understand the inheritance of chicken beak shape. In the present study, we firstly established 4 indicators to describe the chicken beak shapes, including upper beak length (UL), lower beak length (LL), distance between upper and lower beak tips (DB) and upper beak curvature (BC). And then, we measured the 4 beak shape indicators as well as some production traits including body weight (BW), shank length (SL), egg weight (EW), eggshell strength (ES) of a layer breed, Rhode Island Red (RIR), in order to estimate genetic parameters of chicken beak shape. The heritabilities of UL and LL were 0.41 and 0.37, and the heritabilities of DB and BC were 0.22 and 0.21, indicating that beak shape was a highly or mediumly heritable. There were significant positive genetic and phenotypic correlations among UL, LL, and DB. And UL was positively correlated with body weight (BW18) and shank length (SL18) at 18 weeks of age in genetics, and DB was positively correlated with BC in terms of genetics and phenotype. We also found that layers of chicken cages played a role on beak shape, which could be attributed to the difference of lightness in different cage layers. By a genome-wide association study (GWAS) for the chicken UL, we identified 9 significant candidate genes associated with UL in RIR. For the variants with low minor allele frequencies (MAF <0.01) and outside of high linkage disequilibrium (LD) regions, we also conducted rare variant association studies (RVA) and GWAS to find the association between genotype and phenotype. We also analyzed transcriptomic data from multiple tissues of chicken embryos and revealed that all of the 9 genes were highly expressed in beak of chicken embryos, indicating their potential function for beak development. Our results provided the genetic foundation of chicken beak shape, which could help chicken breeding on beak related traits.

Retrospective evaluation of condylar morphology using panoramic radiography in a sample of Turkish population.

The temporomandibular joint is one of the most complex anatomic structures. It takes a great role in masticatory system and helps to make possible some functions such as speaking, chewing and swallowing. Clinicians should have sufficient anatomical knowledge to assess relationships of the hard and soft tissues, including the mandibular condyle, glenoid fossa, articular eminence of the temporal bone, the articular disc and its attachments. The aim of this study was to evaluate the frequency of different types of mandibular condyles and its distribution according to the age and gender. It was also evaluated whether the condyle types were bilaterally symmetrical or not. A total of 1315 digital panoramic images which obtained from the patients suffering from the dental problems were assessed. Demographic data, condylar morphology were noted. All obtained data were analysed by using descriptive statistics. Morphology of mandibular condyles were classified into four shapes as identified in other studies, namely: type I - oval shape, type II - diamond shape, type III - bird beak shape, type IV - crooked finger shape. Two independent examiners, who have 19 and 7 years of experience in oral and dentomaxillofacial radiology, made a consensus and evaluated all images. A total of 1315 digital panoramic images were assessed. Seven hundred sixty-seven [58.3%] the patients were female and 548 [41.6%] were male. The age range of patients was from 18 to 84 years. Right-left condyle types were found to be symmetrical in the range of 67% of the subpopulation examined in the study. For the consensus, 'oval' condyle was common on both the right and left, while 'crooked finger' condyle was the rarest. The temporomandibular joint is the most important structure for all jaw functions such as speech, swallowing. In order for all these functions to continue in a healthy way, the anatomical structure should be known very well down to the finest detail. Identification of anatomical structures and their variations can play an important role in implant dentistry. Clinicians commonly prefer conventional radiologic methods to evaluate dentomaxillofacial region. Although the most of the variations are asymptomatic and require no treatment,correct identification of these findings will reduce unnecessary further diagnostic assessments and will provide more appropriate treatment plans.

Phenotypic differentiation despite gene flow: Beak morphology, bite performance, and population genetics of Loggerhead Shrikes (Lanius ludovicianus).

Previous studies of Loggerhead Shrikes (Laniidae: Lanius ludovicianus) in North America have indicated considerable intraspecific genetic and phenotypic differentiation, but the congruence between genetic and phenotypic differentiation remains obscure. We examined phenotypic differences in beak shape and bite force among geographic groupings across a 950 km range, from the lower Imperial Valley to the upper Central Valley of California, USA. We integrated these analyses with a population genetic analysis of six microsatellite markers to test for correspondence between phenotypic and genetic differences among geographic groups. We found significant phenotypic differentiation despite a lack of significant genetic differentiation among groups. Pairwise beak shape and bite force distances nevertheless were correlated with genetic (F ST) distances among geographic groups. Furthermore, the phenotypic and genetic distance matrices were correlated with pairwise geographic distances. Takentogether, these results suggest that phenotypic differences might be influenced by neutral processes, inbreeding (as indicated by high heterozygosity deficiencies we observed), local adaptation, and/or phenotypic plasticity.

Examining the relationship between different naturally-occurring maxillary beak shapes and their ability to cause damage in commercial laying hens

ABSTRACT 1. Using chicken models to avoid unnecessary harm, this study examined the relationship between naturally-occurring maxillary (top) beak shapes and their ability to cause pecking damage. 2. A selection of 24 Lohmann Brown laying hens from a total population of 100 were sorted into two groups based on their maxillary beak shape, where 12 were classified as having sharp beaks (SB) and 12 as having blunt beaks (BB). 3. All hens were recorded six times in a test pen which contained a chicken model (foam block covered with feathered chicken skin) and a video camera. During each test session, the number of feathers removed from the model, the change in skin and block weight (proxies for tissue damage) and the percentage of successful pecks (resulting in feather and/or tissue removal) were recorded. 4. SB hens removed more feathers from the model and had a greater change in skin weight than BB hens. The mean number of pecks made at the model did not differ between the beak shape groups; however, SB hens had a greater percentage of successful pecks, resulting in feather and/or tissue removal, compared to BB hens. 5. In conclusion, SB hens were more capable of removing feathers and causing damage. Birds performed more successful pecks resulting in feather and/or tissue removal as they gained experience pecking at the model.

Geographic variations in eco-evolutionary factors governing urban birds: The case of university campuses in China.

Urbanization alters natural habitats, restructures biotic communities and serves as a filter for selecting species from regional species pools. However, empirical evidence of the specific traits that allow species to persist in urban areas yields mixed results. More importantly, it remains unclear which traits are widespread for species utilizing urban spaces (urban utilizers) and which are environment-dependent traits. Using 745 bird species from 287 university/institute campuses in 74 cities and their species pools across China, we tested whether species that occur in urban areas are correlated with regards to their biological (body mass, beak shape, flight capacity and clutch size), ecological (diet diversity, niche width and habitat breadth), behavioural (foraging innovation) and evolutionary (diversification rate) attributes. We used Bayesian phylogenetic generalized linear mixed models to disentangle the relative roles of these predictors further, and to determine the extent to which the effects of these predictors varied among different cities. We found that urban birds were more phylogenetically clustered than expected by chance, and were generally characterized by a larger habitat breadth, faster diversification rate, more behavioural innovation and smaller body size. Notably, the relative effects of the attributes in explaining urban bird communities varied with city temperature and elevation, indicating that the filters used to determine urban species were environment dependent. We conclude that, while urban birds are typically small-sized, generalists, innovative and rapidly diversifying, the key traits that allow them to thrive vary spatially, depending on the climatic and topographic conditions of the city. These findings emphasize the importance of studying species communities within specific cities to better understand the contextual dependencies of key traits that are filtered by urban environments.

Innovation and elaboration on the avian tree of life.

Widely documented, megaevolutionary jumps in phenotypic diversity continue to perplex researchers because it remains unclear whether these marked changes can emerge from microevolutionary processes. Here, we tackle this question using new approaches for modeling multivariate traits to evaluate the magnitude and distribution of elaboration and innovation in the evolution of bird beaks. We find that elaboration, evolution along the major axis of phenotypic change, is common at both macro- and megaevolutionary scales, whereas innovation, evolution away from the major axis of phenotypic change, is more prominent at megaevolutionary scales. The major axis of phenotypic change among species beak shapes at megaevolutionary scales is an emergent property of innovation across clades. Our analyses suggest that the reorientation of phenotypes via innovation is a ubiquitous route for divergence that can arise through gradual change alone, opening up further avenues for evolution to explore.

Beak morphometry and morphogenesis across avian radiations.

Adaptive avian radiations associated with the diversification of bird beaks into a multitude of forms enabling different functions are exemplified by Darwin's finches and Hawaiian honeycreepers. To elucidate the nature of these radiations, we quantified beak shape and skull shape using a variety of geometric measures that allowed us to collapse the variability of beak shape into a minimal set of geometric parameters. Furthermore, we find that just two measures of beak shape-the ratio of the width to length and the normalized sharpening rate (increase in the transverse beak curvature near the tip relative to that at the base of the beak)-are strongly correlated with diet. Finally, by considering how transverse sections to the beak centreline evolve with distance from the tip, we show that a simple geometry-driven growth law termed 'modified mean curvature flow' captures the beak shapes of Darwin's finches and Hawaiian honeycreepers. A surprising consequence of the simple growth law is that beak shapes that are not allowed based on the developmental programme of the beak are also not observed in nature, suggesting a link between evolutionary morphology and development in terms of growth-driven developmental constraints.

Morphological diversity and altitudinal differentiation of Aethopyga species.

The morphological characteristics of birds are an important tool for studying their adaptation and evolution. The morphological evolution of a clade is not only constrained by the phylogenetic relationship, but also influenced by ecological factors and interspecific competition. Aethopyga is a group of small nectar-eating birds with obvious sexual dimorphism. They have slender and decurved beaks, which reflect their unique diet and foraging mode. Traditional and geometric morphometrics were combined to characterize the body morphology and beak shape of six species of Aethopyga distributed in China. We aim to assess the roles of phylogeny, altitude, and species interactions to morphological evolution. The main distinguishing characteristic among these six species were overall body size, the ratio of body weight, culmen and tarsal length to body length, tail length and wing length, and beak shape (slender/straight vs. thick/decurved). Although these dimensions cannot distinguish all species, they can show a clear distribution trend, and there is a significant Mahalanobis distance between each pair of species. There were no significant phylogenetic signals in morphological traits. The results of PGLS analysis show that altitude is significantly correlated with log-transformed tarsus length and beak-shaped PC1 (slender/straight vs thick/decurved dimensions) across the six species analyzed. Mantel test shows that the distance matrix of beak morphological characteristics showed a significant correlation with the altitudinal distance matrix. The results indicated no significant phylogenetic signal in the morphological characteristics of six species. In terms of beak shape, species with greater overlap in elevation distribution have more similar morphological characteristics, that is, less morphological differentiation.

Beak shape and nest material use in birds.

The evolution of behaviour can both influence, and be influenced by, morphology. Recent advances in methods and data availability have facilitated broad-scale investigations of physical form and behavioural function in many contexts, but the relationship between animal morphology and object manipulation-particularly objects used in construction-remains largely unknown. Here, we employ a new global database of nest materials used by 5924 species of birds together with phylogenetically informed random forest models to evaluate the link between beak shape and these nest-building materials. We find that beak morphology, together with species diet and access to materials, can predict nest-material use above chance and with high accuracy (68-97%). Much of this relationship, however, is driven by phylogenetic signal and sampling biases. We therefore conclude that while variation in nest material use is linked with that of beak shape across bird species, these correlations are modulated by the ecological context and evolutionary history of these species. This article is part of the theme issue 'The evolutionary ecology of nests: a cross-taxon approach'.

'MH-21,' A NOVEL HIGH-YIELDING AND RUSTS RESISTANT BREAD WHEAT VARIETY FOR IRRIGATED AREAS OF PUNJAB, PAKISTAN

Developing high-yielding wheat varieties tolerant to abiotic and biotic stresses is a challenge wheat breeder currently face. Wheat Research Institute (WRI), Ayub Agricultural Research Institute (AARI), Faisalabad, Pakistan, has released 65 wheat varieties, including MH-21, for several zones since its establishment in 1906. MH-21, with the varietal code V-12304, gave 11.2% and 10.28% more grain yield than the check variety (Faisalabad-08), respectively, in preliminary (2011–2012) and regular yield trials (2012–2013). Then, testing it in outstation yield trials proceeded over 21 locations in Punjab province (2013–2014) and 18 locations all over Pakistan (2014–2015, 2017–2018, and 2019– 2020) for yield and disease constancy, simultaneous with agronomic field trials and quality lab testing during 2014–2018 and 2014–2016, respectively. It exhibited an amber seed color, semi-erect growth habit at booting, erect flag leaf attitude, hairiness auricle, awned yellowish ear, and elevated shoulder and beak shape of glumes traits. DNA fingerprinting of MH-21 ensued to compare its genetic background with previously registered 21 wheat varieties. Given the promising stable performance in multi-locations over the years for better grain yield, nutritional quality, and resistance against rusts, the Punjab Seed Council approved V12304 in 2021 with the name „MH-21‟ for general cultivation in irrigated areas of Punjab, Pakistan.

Ecological factors drive the divergence of morphological, colour and behavioural traits in cactus wrens (Aves, Troglodytidae).

The study of ecological mechanisms influencing organisms' phenotypic variation is a central subject of evolutionary biology. In this study, we characterized morphological, plumage colour and acoustic variation in cactus wrens Campylorhynchus brunneicapillus throughout its distribution. We assessed whether Gloger's, Allen's and Bergmann's ecogeographical rules, and the acoustic adaptation hypothesis relate to geographical trait variation. We analysed specimen coloration in belly and crown plumage, beak shape and structural song characteristics. We tested whether the subspecific classification or the peninsular/mainland groups mirrored the geographical variation in phenotypes and whether ecological factors were associated with patterns of trait variation. Our results suggest that colour, beak shape and acoustic traits varied across the range, in agreement with two lineages described by genetics. The simple versions of Gloger's and Allen's rules are related to variations in colour traits and morphology. Conversely, patterns of phenotypic variation did not support Bergmann's rule. The acoustic adaptation hypothesis supported song divergence for frequency-related traits. Phenotypic variation supports the hypothesis of two taxa: C. affinis in the Baja California peninsula and C. brunneicapillus in the mainland. The ecological factors are associated with phenotypic trait adaptations, suggesting that divergence between lineages could result from ecological divergence.

An analysis of the maxillary beak shape variation between 2 pure layer lines and its relationship to the underlying premaxillary bone, feather cover, and mortality

Beak shape varies considerably within and between intact-beak laying hens, and aspects of beak shape appear to be heritable. As an alternative to beak treatment (an effective method of reducing damage from severe feather pecking (SFP)), this variation could be used to genetically select hens whose beak shapes are less apt to cause damage. To be able to select certain phenotypes, the beak shape variation that exists within laying hen flocks must first be characterized. The objectives of this study were to 1) describe the maxillary beak shape variation in 2 pure White Leghorn layer lines with intact beaks using geometric morphometrics to analyze images, and 2) examine the beak shape's relationship to the premaxillary bone, feather cover, and mortality. A lateral head image was taken of each hen (n=710), and 20 landmarks were placed along each image's dorsal and ventral margins of the maxillary beak. Landmark coordinates were standardized by Procrustes superimposition, and the covariation was analyzed by principal components analysis and multivariate regression. Feather cover was scored at 3 ages and mortality was monitored throughout the production cycle. Three principal components (PCs) explained 83% of the maxillary beak shape variation and the first PC partially separated the 2 lines. Maxillary beak shapes ranged from long and narrow with pointed tips to short and wide with more curved tips. Moderate correlations were found between the maxillary beak and premaxillary bone shape (rs=0.44) and size (rs=0.52). Line A hens had better feather cover than Line B at all ages. Line A hens also had less total and cannibalism-related mortality than Line B (10.7 and 0.4% vs. 16.7 and 2.4%, respectively). Beak shape may be one factor contributing to the observed differences in feather cover and mortality. The results suggest that distinct maxillary beak phenotypes within each line could be selected to help reduce SFP damage and improve bird welfare.

Front Cover: The Wild‐Type tRNA Adenosine Deaminase Enzyme TadA Is Capable of Sequence‐Specific DNA Base Editing (ChemBioChem 16/2023)

The directed evolution of the adenosine deaminase enzyme TadA from an RNA-editing enzyme to an efficient DNA-editing enzyme was crucial for the development of the adenine base editor (ABE). Previous experiments showed no detectable DNA-editing activity by an ABE utilizing wild-type TadA (ABE0.1), but here we show ABE0.1 is able to edit DNA strictly within TACG motifs. This sequence requirement is partially governed by the C-terminal α5 helix of TadA, which accumulated many mutations during the directed evolution of TadA. The evolution of TadA to better access adenines within a diverse range of sequences is reflective of the Galapagos finches, which evolved different beak shapes in order to better access the food that was available to them. This cover art shows the protein structures of ecTadA (PDB: 1Z3A) and the evolved TadA8e (PDB: 6VCA), along with two species of Galapagos finches using the different α5 helix structures to access a target adenine within different sequence contexts. More information can be found in the Research Article by A. C. Komor et al.

The growth of the buccal mass in Sepia officinalis: functional changes throughout ontogeny

Due to their small size, juveniles are more likely to show lower absolute levels of performance leading to a potential competitive disadvantage compared to adults. Therefore, juveniles are expected to compensate by showing a higher relative performance, and/or partitioning resources to overcome this performance disadvantage. Here, we investigate the link between ontogeny and feeding performance in the common cuttlefish Sepia officinalis. We explore the changes in beak shape, wear pattern, mechanical properties, muscular anatomy, and bite force during growth from 3-month post hatching to adults. We show that both upper and lower beaks present important ontogenetic shape variation in the rostrum area that might be due to wear induced by feeding. The mechanical properties of the beaks in juveniles indicate greater resistance compared to adults. Tanning observed on the beaks provides reinforcement to areas under high load during biting. In addition, muscle development and relative bite force were found to differ between cuttlefish of different ages, resulting in juveniles having a similar bite force for their size but with a muscular advantage for opening. Finally, an isometric relation is found in the bite force of S. officinalis, with no sign of feeding performance compensation in juveniles. Feeding performance thus does not reflect the ontogenetic shift from a crustacean-based diet in juveniles to a fish-based diet in adults.

Comparative anatomy and functional implications of variation in the buccal mass in coleoid cephalopods.

In contrast to the well-studied articulated vertebrate jaws, the structure and function of cephalopod jaws remains poorly known. Cephalopod jaws are unique as the two jaw elements do not contact one another, are embedded in a muscular mass and connected through a muscle joint. Previous studies have described the anatomy of the buccal mass muscles in cephalopods and have proposed variation in muscle volume depending on beak shape. However, the general structure of the muscles has been suggested to be similar in octopuses, squids, and cuttlefish. Here we provide a quantitative analysis of the variation in the buccal mass of coleoids using traditional dissections, histological sections and contrast-enhanced computed tomography scans. Our results show that the buccal mass is composed of four main homologous muscles present in both decapodiforms and octopodiforms as suggested previously. However, we also report the presence of a muscle uniquely present in octopodiforms (the postero-lateral mandibular muscle). Our three dimensional reconstructions and quantitative analyses of the buccal mass muscles pave the way for future functional analyses allowing to better model jaw closing in coleoids. Finally, our results suggest differences in beak and muscle function that need to be validated using future in vivo functional analyses.