Coating Of Beads Research Articles

Crafting illusions: Human-made composite coating used to simulate amber beads in prehistoric Iberia

The discovery of a set of beads, comprising both Sicilian amber and resin-coated beads in the Middle Bronze Age burial site of Cova del Gegant (Sitges, Barcelona, Spain), has sparked inquiries into whether the coating was intended for imitation or counterfeiting of amber. We assert that human-made materials, such as bead coatings, are intentionally conceived, designed, and crafted to fulfill specific functions. Thus, for an object to effectively fulfill its intended purpose, it must meet particular performance criteria influenced by situational factors.This paper aims to construct an empirically grounded narrative elucidating the development and function of resin-coated bead technology. Our methodology includes a comprehensive quantitative analysis of the coating and beads, an exploration of the interplay between technical choices and situational factors, and an investigation into whether the simulation of sensory performance characteristics played a pivotal role in the concept and design of resin-coated beads. Additionally, we synthesize data to unveil broader patterns related to the crafting and utilization of resin-coated and amber beads across time and space.We have documented resin-coated beads in the Iberian Peninsula from the Neolithic period (5th to 3rd millennia BCE) until at least the Middle Bronze Age (first half of the 2nd millennium BCE), where they coexisted with amber beads. Analysis employing ATR-FTIR and μ-CT imaging has revealed a composite coating comprising pine resin, beeswax, and carotene, adhered to shell beads with bone glue. This composite material represents the earliest known development in human history, unique to the Iberian Peninsula and without parallel in Prehistoric Europe.Our examination of the performance characteristics and functional roles of resin-coated beads suggests their potential as substitutes for amber beads, particularly in regions where amber was scarce or inaccessible. Despite being crafted from commonplace materials, these coated beads exhibit intentional design choices likely aimed at simulating the visual performance characteristics of amber. This deliberate effort, alongside their widespread distribution across time and space, indicates that composite-coated beads held symbolic and social significance akin to amber beads.

Evaluation on Bead Coating Stripping Resistance Under Varying Temperature and Coating Materials

Evaluation on Bead Coating Stripping Resistance Under Varying Temperature and Coating Materials

The Value of Bead Coating in the Manufacturing of Amorphous Solid Dispersions: A Comparative Evaluation with Spray Drying.

Despite the fact that an amorphous solid dispersion (ASD)-coated pellet formulation offers potential advantages regarding the minimization of physical stability issues, there is still a lack of in-depth understanding of the bead coating process and its value in relation to spray drying. Therefore, bead coating and spray drying were both evaluated for their ability to manufacture high drug-loaded ASDs and for their ability to generate physically stable formulations. For this purpose, naproxen (NAP)–poly(vinyl-pyrrolidone-co-vinyl acetate) (PVP-VA) was selected as an interacting drug–polymer model system, whilst naproxen methyl ester (NAPME)–PVP-VA served as a non-interacting model system. The solvent employed in this study was methanol (MeOH). First, a crystallization tendency study revealed the rapid crystallization behavior of both model drugs. In the next step, ASDs were manufactured with bead coating as well as with spray drying and for each technique the highest possible drug load that still results in an amorphous system was defined via a drug loading screening approach. Bead coating showed greater ability to manufacture high drug-loaded ASDs as compared to spray drying, with a rather small difference for the interacting drug–polymer model system studied but with a remarkable difference for the non-interacting system. In addition, the importance of drug–polymer interactions in achieving high drug loadings is demonstrated. Finally, ASDs coated onto pellets were found to be more physically stable in comparison to the spray dried formulations, strengthening the value of bead coating for ASD manufacturing purposes.

Research on Interface Modification and Thermal Insulation/Anticorrosive Properties of Vacuum Ceramic Bead Coating

The thermal insulation effect of the coating was closely related to the content of the thermal insulation filler, but too much filler would cause interfacial compatibility problems of various substances in the coating, micro-defects in the coating, and affect the anti–corrosion performance of the coating. Therefore, solving the interface problem was the key to preparing a coating with heat insulation and anticorrosion functions. In this study, organic–inorganic hybrid polymer was used to modify the surface of vacuum ceramic microbeads, and epoxy–silicone resin was used as the film–forming material to prepare a heat-insulating and anticorrosive coating that can withstand 200 °C. The SEM morphology showed that the interface compatibility of the vacuum ceramic beads modified by the organic–inorganic hybrid agent and the film-forming material were improved, the dispersibility was significantly improved, and the beads were tightly arranged; the thermal conductivity of the coating reached 0.1587 W/(m·K), which decreased by 50% after adding 20% ceramic beads, ANSYS finite element simulation showed that the coating has good thermal insulation performance; after the coating underwent a thermal aging test at 200 °C for 600 h, the microstructure was dense, and the low-frequency impedance modulus was still around 109 Ω·cm2. There was no obvious defect in the microstructure after the alternating cold and heat test for 600 h; the low-frequency impedance modulus was still above 108 Ω·cm2, and the low-frequency impedance modulus of the coating was 1010 Ω·cm2 after the 130d immersion test, indicating that the coating had good heat resistance and anti-corrosion performance.

Simplified Model and Simulation Analysis of Ferrite Hollow Bead Coating Based on Computer Aided Design Method

When ferrite hollow beads were made into coating materials, because ferrite hollow beads had hollow internal structure and conductive and magnetic ball wall, ferrite hollow beads have typical resonant ball characteristics in structure. The absorbing coating composed of numerous ferrite hollow beads could be considered as a resonant absorber. With the rapid development of information technology, especially computer technology, the introduction of computer simulation technology can often save experimental costs and reduce the blindness of experiments. Therefore, in order to comply with this development trend, this chapter will establish the absorber model of ferrite hollow bead coating based on HFSS (high frequency simulator structure) electromagnetic simulation software, and qualitatively analyze the relationship between the thickness of ferrite hollow bead coating and the resonant frequency of absorber and the distribution state of electromagnetic field inside the coating through the of computer simulation software.

Development of a Surface Coating Technique with Predictive Value for Bead Coating in the Manufacturing of Amorphous Solid Dispersions.

The aim of this paper was to investigate whether a surface coating technique could be developed that can predict the phase behavior of amorphous solid dispersions (ASDs) coated on beads. ASDs of miconazole (MIC) and poly(vinylpyrrolidone-co-vinyl acetate) (PVP-VA) in methanol (MeOH) were studied as a model system. First, the low crystallization tendency of the model drug in MeOH was evaluated and confirmed. In a next step, a drug loading screening was performed on casted films and coated beads in order to define the highest possible MIC loading that still results in a one-phase amorphous system. These results indicate that film casting is not suitable for phase behavior predictions of ASDs coated on beads. Therefore, a setup for coating a solid surface was established inside the drying chamber of a spray dryer and it was found that this surface coating technique could predict the phase behavior of MIC-PVP-VA systems coated on beads, in case an intermittent spraying procedure is applied. Finally, spray drying was also evaluated for its ability to manufacture high drug-loaded ASDs. The highest possible drug loadings that still result in a one-phase amorphous system were obtained for bead coating and its predictive intermittent surface coating technique, followed by spray drying and finally by film casting and the continuous surface coating technique, thereby underlining the importance for further research into the underexplored bead coating process.

Effect of added prebiotic (Isomalto-oligosaccharide) and Coating of Beads on the Survival of Microencapsulated Lactobacillus rhamnosus GG

Abstract The study aimed to encapsulate Lactobacillus rhamnosus GG (LGG) with the selected prebiotic, using co-extrusion technology with a poly-L-lysine (PLL) coating and evaluate probiotic survival in simulated gastrointestinal conditions. Selection of ideal prebiotic was conducted using inulin, fructo-oligosaccharide (FOS) and isomalto-oligosaccharide (IMO) and its optimal concentration to be incorporated in microencapsulation was determined. Microcapsules without coating (S1: no prebiotic and S3: with prebiotic) and with coating (S2: no prebiotic and S4: with prebiotic) produced were evaluated based on its physical properties and survival in simulated gastrointestinal environment. The IMO with a concentration of 3.0% (w/v) was selected due to its best effect in promoting growth of LGG after 24 h (8.63±0.07 log CFU/mL). The morphology analysis revealed that all microcapsules produced were spherical with a diameter ranging from 491.3 to 541.7 µm and microencapsulation efficiency ranged from 84.16 ±5.30% to 90.56±3.33%. The incorporation of IMO and coating with PLL improved the survival of LGG by 3% up to 52% after 2 h of incubation in simulated gastric digestion. Among all formulations, PLL coated microcapsules added with IMO was the most effective in protecting LGG during the first hour of simulated gastric digestion (6.52 log CFU/mL) with cell viability greater than the minimum recommended level of 106 CFU/mL.

Layer-by-Layer Cerium Oxide Nanoparticle Coating for Antioxidant Protection of Encapsulated Beta Cells.

In type 1 diabetes, the replacement of the destroyed beta cells could restore physiological glucose regulation and eliminate the need for exogenous insulin. Immunoisolation of these foreign cellular transplants via biomaterial encapsulation is widely used to prevent graft rejection. While highly effective in blocking direct cell-to-cell contact, nonspecific inflammatory reactions to the implant lead to the overproduction of reactive oxygen species, which contribute to foreign body reaction and encapsulated cell loss. For antioxidant protection, cerium oxide nanoparticles (CONPs) are a self-renewable, ubiquitous, free radical scavenger currently explored in several biomedical applications. Herein, 2-12 alternating layers of CONP/alginate are assembled onto alginate microbeads containing beta cells using a layer-by-layer (LbL) technique. The resulting nanocomposite coatings demonstrate robust antioxidant activity. The degree of cytoprotection correlates with layer number, indicating tunable antioxidant protection. Coating of alginate beads with 12 layers of CONP/alginate provides complete protection to the entrapped beta cells from exposure to 100 × 10-6 m H2 O2 , with no significant changes in cellular metabolic activity, oxidant capacity, or insulin secretion dynamics, when compared to untreated controls. The flexibility of this LbL method, as well as its nanoscale profile, provides a versatile approach for imparting antioxidant protection to numerous biomedical implants, including beta cell transplantation.

Metallurgical Characterization of a Weld Bead Coating Applied by the PTA Process on the D2 Tool Steel

Abstract In this investigation, a nickel-base powder mixed with tungsten carbide particles was applied by Plasma Transferred Arc welding (PTA) on the surface of the D2 cold work tool steel to improve surface quality and to extend its lifetime during applications. The Design of Experiment (DoE) method was applied to obtain the appropriate combination of hardfacing parameters and to run the minimum number of tests. Current, travel speed and preheat were considered as variable parameters. These parameters are important to reach a final layer with an appropriate bead geometry accompanied with good metallurgical properties. All samples were prepared for metallurgical investigations and the effect of process parameters on the weld bead geometry was considered. For each experiment run, weld bead geometry parameters were measured including dilution, penetration and reinforcement. Microstructures and the distribution of tungsten carbide particles after welding were analyzed by Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) equipped with an EDS microprobe. In addition, hardness tests were performed to evaluate the mechanical properties of the weld bead layers. Finally, among all the experiments, the best sample with appropriate bead geometry and microstructure was selected.

Seasonal Arsenic Accumulation in Stream Sediments at a Groundwater Discharge Zone

Seasonal changes in arsenic and iron accumulation rates were examined in the sediments of a brook that receives groundwater discharges of arsenic and reduced iron. Clean glass bead columns were deployed in sediments for known periods over the annual hydrologic cycle to monitor changes in arsenic and iron concentrations in bead coatings. The highest accumulation rates occurred during the dry summer period (July-October) when groundwater discharges were likely greatest at the sample locations. The intermediate flow period (October-March), with higher surface water levels, was associated with losses of arsenic and iron from bead column coatings at depths below 2-6 cm. Batch incubations indicated iron releases from solids to be induced by biological reduction of iron (oxy)hydroxide solids. Congruent arsenic releases during incubation were limited by the high arsenic sorption capacity (0.536 mg(As)/mg(Fe)) of unreacted iron oxide solids. The flooded spring (March-June) with high surface water flows showed the lowest arsenic and iron accumulation rates in the sediments. Comparisons of accumulation rates across a shoreline transect were consistent with greater rates at regions exposed above surface water levels for longer times and greater losses at locations submerged below surface water. Iron (oxy)hydroxide solids in the shallowest sediments likely serve as a passive barrier to sorb arsenic released to pore water at depth by biological iron reduction.

Fatty Acid Binding Proteins FABP9 and FABP10 Participate in Antibacterial Responses in Chinese Mitten Crab, Eriocheir sinensis

Invertebrates rely solely on the innate immune system for defense against pathogens and other stimuli. Fatty acid binding proteins (FABP), members of the lipid binding proteins superfamily, play a crucial role in fatty acid transport and lipid metabolism and are also involved in gene expression induced by fatty acids. In the vertebrate immune system, FABP is involved in inflammation regulated by fatty acids through its interaction with peroxidase proliferator activate receptors (PPARs). However, the immune functions of FABP in invertebrates are not well characterized. For this reason, we investigated the immune functionality of two fatty acid binding proteins, Es-FABP9 and Es-FABP10, following lipopolysaccharide (LPS) challenge in the Chinese mitten crab (Eriocheir sinensis). An obvious variation in the expression of Es-FABP9 and Es-FABP10 mRNA in E. sinensis was observed in hepatopancreas, gills, and hemocytes post-LPS challenge. Recombinant proteins rEs-FABP9 and rEs-FABP10 exhibited distinct bacterial binding activity and bacterial agglutination activity against Escherichia coli and Staphylococcus aureus. Furthermore, bacterial growth inhibition assays demonstrated that rEs-FABP9 responds positively to the growth inhibition of Vibrio parahaemolyticuss and S. aureus, while rEs-FABP10 responds positively to the growth inhibition of Aeromonas hydrophila and Bacillus subtilis. Coating of agarose beads with recombinant rEs-FABP9 and rEs-FABP10 dramatically enhanced encapsulation of the beads by crab hemocytes in vitro. In conclusion, the data presented here demonstrate the participation of these two lipid metabolism-related proteins in the innate immune system of E. sinensis.

Improvement of the Sensitivity for Silica Humidity Sensors with a Multiple-layered Silica Bead Coating

Many investigations on humidity sensors have attracted great attention to mesoporous thin films because of their high surface area and high porosity. The sensing response strongly depends on the pore properties of the sensing film because a larger interfacial area provides better accessibility to external changes from foreign chemical species in external environment. Multiple-layered silica beads (MLSBs) with high surface area and high porosity were first employed as sensing films in order to solve a problem arising from the density of silica films. Improved sensitivity of the MLSB-coated silica humidity sensor was successfully obtained: 1.85, 3.06 and 81.14 in the relative humidity (RH) ranges from 15% to 60%, 15% to 75%, and 15% to 90%, respectively. The capacitance sensitivity was as large as 2.3 pF/% RH at 50% to 90% RH. These results are due to better accessibility through an increase in the pore dimension of the MLSB-coated silica humidity sensor over that of previously reported porous thin-film silica humidity sensors fabricated by using the aerogel method.

The benefit of glass bead supports for efficient gas phase photocatalysis: Case study of a commercial and a synthesised photocatalyst

In the field of photocatalytic air purification, the immobilisation of catalyst particles on support surfaces without loss of photon efficiency is an important challenge. Therefore, an immobilisation method involving a one-step suspension coating of pre-synthesised photocatalysts on glass beads was applied. The various benefits are exemplified in the gas phase photodegradation of ethylene. Coating of glass beads is easy, fast, cheap and offers a more efficient alternative to bulk catalyst pellets. Furthermore, this coating procedure allows to use porous, pre-synthesised catalysts to their full potential, as the surface area and morphology of the initial powder is barely altered after coating, in strong contrast to pelletising. With this technique it became possible to study the gas phase photocatalytic activity of commercial titanium dioxide, trititanate nanotubes and mixed phase anatase/trititanate nanotubes in a packed bed reactor towards the degradation of ethylene without changing the catalyst properties. Coating of glass beads with the photocatalyst revealed the superior activity of the as-prepared nanotubes, compared to TiO 2 Aerolyst ® 7710 in gaseous phase.

Filamin B Mediates ICAM-1-driven Leukocyte Transendothelial Migration

During inflammation, the endothelium mediates rolling and firm adhesion of activated leukocytes. Integrin-mediated adhesion to endothelial ligands of the Ig-superfamily induces intracellular signaling in endothelial cells, which promotes leukocyte transendothelial migration. We identified the actin cross-linking molecule filamin B as a novel binding partner for intracellular adhesion molecule-1 (ICAM-1). Immune precipitation as well as laser scanning confocal microscopy confirmed the specific interaction and co-localization of endogenous filamin B with ICAM-1. Importantly, clustering of ICAM-1 promotes the ICAM-1-filamin B interaction. To investigate the functional consequences of filamin B binding to ICAM-1, we used small interfering RNA to reduce filamin B expression in ICAM-1-GFP expressing HeLa cells. We found that filamin B is required for the lateral mobility of ICAM-1 and for ICAM-1-induced transmigration of leukocytes. Reducing filamin B expression in primary human endothelial cells resulted in reduced recruitment of ICAM-1 to endothelial docking structures, reduced firm adhesion of the leukocytes to the endothelium, and inhibition of transendothelial migration. In conclusion, this study identifies filamin B as a molecular linker that mediates ICAM-1-driven transendothelial migration.

Fast Fluorescence Laser Tracking Microrheometry, II: Quantitative Studies of Cytoskeletal Mechanotransduction

Fluorescence laser tracking microrheometry (FLTM) is what we believe to be a novel method able to assess the local, frequency-dependent mechanical properties of living cells with nanometer spatial sensitivity at speeds up to 50 kHz. In an earlier article, we described the design, development, and optimization phases of the FLTM before reporting its performances in a variety of viscoelastic materials. In the work presented here, we demonstrate the suitability of FLTM to study local cellular rheology and obtain values for the storage and loss moduli G′( ω) and G″( ω) of fibroblasts consistent with past literature. We further establish that chemically induced cytoskeletal disruption is accompanied by reduced cellular stiffness and viscosity. Next, we provide a systematic study of some experimental variables that may critically influence microrheology measurements. First, we interrogate and justify the relevance of bead endocytosis as a method of cellular internalization of 1- μm probes in FLTM. Second, we show that as sample temperature increases, FLTM findings are elevated toward higher frequencies. Third, we confirm that relevant bead sizes (1 and 2 μm) have no effect on FLTM measurements. Fourth, we report the lack of influence of bead coatings (antiintegrin, antitransferrin, antidystroglycan, or uncoated tracers were surveyed) on their rheological readouts. Finally, we demonstrate the potential of FLTM in studying how substratum rigidity regulates cellular rheological properties. Interestingly, multiple, coupled strain relaxation mechanisms can be observed separated by two plateau moduli. Although these observations can be partly explained by rheological theories describing entangled actin filaments, there is a clear need to extend existing microrheology models to the cytoskeleton, including potentially important factors such as network geometry and remodeling.

Lead contamination of inexpensive plastic jewelry

The neurological hazards of lead to children are well-known. As a result of recent documented cases of lead poisoning, regulatory attention in the United States has focused on the lead content of children's metal jewelry. By contrast, little is known about the possible hazards of plastic jewelry items. The objective of this study was to determine whether inexpensive plastic jewelry is a possible source of toxic lead for children. Samples of more than 100 inexpensive plastic jewelry items were analyzed for lead content. Beads were screened by soaking in 1 M nitric acid. Nine items found to release more than 30 µg of lead per bead were further tested for accessible lead, and scrapings of the bead coatings were analyzed for total lead content. The maximum accessible lead found was 49 µg per bead, which is below the current US Consumer Product Safety Commission limit of 175 µg. However, when the number of beads in each item was taken into account, six of the nine leaded samples contained more than 175 µg accessible lead per item. The lead in these items appears to be associated with lead-based paints used to produce glossy coatings on imitation pearls and similar items. Coatings obtained by scraping individual beads contained 3.5–23% lead, which far exceeds the US regulatory limit of 0.06% lead in paints on items intended for children. Our results demonstrate that plastic jewelry items merit the attention of public health and consumer protection agencies seeking to limit the exposure of children to lead.

Microwave-Assisted Coating of PMMA Beads by Silver Nanoparticles

Microwave (MW) irradiation was found to be a new technique for coating silver nanoparticles with an average size of approximately 31 nm onto the surface of poly(methyl methacrylate) PMMA beads (3 mm diameter). The microwave polyol reduction was carried out under an argon atmosphere. Silver nanoparticles were obtained by the MW irradiation of a solution mixture containing silver nitrate (or silver acetate), poly(ethylene glycol), ethanol, water, and 24 wt % aqueous ammonia for 5 min in the presence of PMMA beads, yielding a PMMA-nanosilver composite. By controlling the atmosphere and reaction conditions, we could achieve the deposition of silver nanoparticles onto the surface of poly(methyl methacrylate) and vary the amount of the silver anchored to the surface. The resulting silver-deposited PMMA samples were characterized using X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray analysis, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, and volumetric titration with potassium thiocyanate (KSCN) according to the Folgard method.

Drosophila C-type lectins enhance cellular encapsulation

C-type lectins are calcium-dependent carbohydrate binding proteins, and animal C-type lectins participate in innate immunity and cell–cell interactions. In the fruit fly Drosophila melanogaster, more than 30 genes encode C-type lectin domains. However, functions of Drosophila C-type lectins in innate immunity are not well understood. This study is to investigate whether two Drosophila C-type lectins, CG33532 and CG33533 (designated as DL2 and DL3, respectively), are involved in innate immune responses. Recombinant DL2 and DL3 were expressed and purified. Both DL2 and DL3 agglutinated Gram-negative Escherichia coli in a calcium-dependent manner. Though DL2 and DL3 are predicted to be secreted proteins, they were detected on the surface of Drosophila hemocytes, and recombinant DL2 and DL3 also directly bound to hemocytes. Coating of agarose beads with recombinant DL2 and DL3 enhanced their encapsulation and melanization by Drosophila hemocytes in vitro. However, hemocyte encapsulation was blocked when the lectin-coated beads were pre-incubated with rat polyclonal antibody specific for DL2 or DL3. Our results suggest that DL2 and DL3 may act as pattern recognition receptors to mediate hemocyte encapsulation and melanization by directly recruiting hemocytes to the lectin-coated surface.

Validation of a Gravimetric Procedure for Recovery of Processing Materials from Porous Coated Metal Implants

Abstract Test coupons of ASTM F 75 cobalt chrome alloy with sintered bead coatings were contaminated with known amounts of a paraffin based buffing compound and heated to simulate buffing friction. The soils were then recovered by sonication for 1 to 6 h in hexane and analyzed using a gravimetric technique. Values were determined for the amounts recovered for both soluble and insoluble components of the buffing compounds and the percent recovery was calculated. For this system, the optimum time for sonication was determined to be 4 h, with recovery values greater than 80%. Analyses run on uncontaminated coupons yielded 0.06 mg of insoluble debris. Elemental analysis of that debris was consistent with erosion of the glassware during sonication.

Characterization of the Oligomer Structure of Recombinant Human Mannan-binding Lectin

Mannan-binding lectin (MBL) belongs to a family of proteins called the collectins, which show large differences in their ultrastructures. These differences are believed to be determined by different N-terminal disulfide-bonding patterns. So far only the bonding pattern of two of the simple forms (recombinant rat MBL-C and bovine CL-43) have been determined. Recombinant MBL expressed in human cells was purified, and the structure of the N-terminal region was determined. Preliminary results on human plasma-derived MBL revealed high similarity to the recombinant protein. Here we report the structure of the N-terminal part of recombinant human MBL and present a model to explain the oligomerization pattern. Using a strategy of consecutive enzymatic digestions and matrix-assisted laser desorption ionization mass spectrometry, we succeeded in identifying a number of disulfide-linked peptides from the N-terminal cysteine-rich region. Based on these building blocks, we propose a model that can explain the various oligomeric forms found in purified MBL preparations. Furthermore, the model was challenged by the production of cysteine to serine mutants of the three N-terminally situated cysteines. The oligomerization patterns of these mutants support the proposed model. The model indicates that the polypeptide dimer is the basic unit in the oligomerization.