Bayesian Regularization Neural Network Research Articles

A synergistic approach to optimizing the performance of a concentrating solar segmented variable area leg thermoelectric generator using numerical methods and neural networks

AbstractThis study presents an optimized design for segmented variable area leg thermoelectric modules using finite element methods and Bayesian regularized neural networks. We explored the impact of geometry and thermal parameters on module performance using ANSYS software, identifying optimal parameters for power output and efficiency. Key findings revealed the higher influence of geometric parameters and confirmed the advantages of segmented thermoelectric generators for high-temperature applications like concentrated solar systems. With this optimization, power output and efficiency of the module increased by 875% and 165%, respectively, under 25 Suns. To refine the optimization process, a Bayesian regularized neural network was utilized, proving effective in predicting module performance with a low mean squared error and high coefficient of determination. This research provides important insights into high-performance thermoelectric modules for sustainable energy applications, demonstrating the significant role of advanced computational methods in energy solutions.

Liquid droplet entrainment in an annular flow boiling regime—A Bayesian regularization algorithm based study

Accurate prediction of the entrained liquid droplet fraction in an annular two-phase flow regime plays a crucial role for estimating the dryout type critical heat flux to identify the optimized flow characteristics in the thermal systems across different industries. Existing studies have provided different correlations based on the limited experimental data. However, these correlations are applicable to certain operating conditions. Therefore, the present study aims at applying a deep learning method, specifically an artificial neural network (ANN), to enhance the prediction of the entrained liquid droplet fraction. Experimental data from various works on annular flow, covering a wide spectrum of pressure and flow conditions, are utilized for training the ANN model. Eight input variables, viz, superficial gas velocity (JSG), superficial liquid velocity (JSL), gas viscosity (μG), liquid viscosity (μL), gas density (ρG), liquid density (ρL), pipe diameter (d) and liquid surface tension (σLV) are considered as input features. The entrained liquid droplet fraction is the single output feature. The present model employs the Bayesian regularization backpropagation algorithm for training. The present ANN model is compared against the performance of linear regression, decision tree and support vector machine algorithms, and found that the performance of the present Bayesian regularization neural network (BRNN) model is superior within ∼7.5% deviation. Further, the BRNN model is coupled with the film mass flow rate model to obtain the axial variation of the liquid film mass flow rate and good agreement is noticed when compared against the experimental data.

Advancements in Epidemiological Modeling: Bayesian Regularization Neural Networks for Smoke Dynamics

Advancements in Epidemiological Modeling: Bayesian Regularization Neural Networks for Smoke Dynamics

Mechanical Framework for Geopolymer Gels Construction: An Optimized LSTM Technique to Predict Compressive Strength of Fly Ash-Based Geopolymer Gels Concrete.

As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of its components, this work proposes a thorough system or framework for estimating the compressive strength of fly ash-based geopolymer concrete (FAGC). It could be possible to construct a system for predicting the compressive strength of FAGC using soft computing methods, thereby avoiding the requirement for time-consuming and expensive experimental tests. A complete database of 162 compressive strength datasets was gathered from the research papers that were published between the years 2000 and 2020 and prepared to develop proposed models. To address the relationships between inputs and output variables, long short-term memory networks were deployed. Notably, the proposed model was examined using several soft computing methods. The modeling process incorporated 17 variables that affect the CSFAG, such as percentage of SiO2 (SiO2), percentage of Na2O (Na2O), percentage of CaO (CaO), percentage of Al2O3 (Al2O3), percentage of Fe2O3 (Fe2O3), fly ash (FA), coarse aggregate (CAgg), fine aggregate (FAgg), Sodium Hydroxide solution (SH), Sodium Silicate solution (SS), extra water (EW), superplasticizer (SP), SH concentration, percentage of SiO2 in SS, percentage of Na2O in SS, curing time, curing temperature that the proposed model was examined to several soft computing methods such as multi-layer perception neural network (MLPNN), Bayesian regularized neural network (BRNN), generalized feed-forward neural networks (GFNN), support vector regression (SVR), decision tree (DT), random forest (RF), and LSTM. Three main innovations of this study are using the LSTM model for predicting FAGC, optimizing the LSTM model by a new evolutionary algorithm called the marine predators algorithm (MPA), and considering the six new inputs in the modeling process, such as aggregate to total mass ratio, fine aggregate to total aggregate mass ratio, FASiO2:Al2O3 molar ratio, FA SiO2:Fe2O3 molar ratio, AA Na2O:SiO2 molar ratio, and the sum of SiO2, Al2O3, and Fe2O3 percent in FA. The performance capacity of LSTM-MPA was evaluated with other artificial intelligence models. The results indicate that the R2 and RMSE values for the proposed LSTM-MPA model were as follows: MLPNN (R2 = 0.896, RMSE = 3.745), BRNN (R2 = 0.931, RMSE = 2.785), GFFNN (R2 = 0.926, RMSE = 2.926), SVR-L (R2 = 0.921, RMSE = 3.017), SVR-P (R2 = 0.920, RMSE = 3.291), SVR-S (R2 = 0.934, RMSE = 2.823), SVR-RBF (R2 = 0.916, RMSE = 3.114), DT (R2 = 0.934, RMSE = 2.711), RF (R2 = 0.938, RMSE = 2.892), LSTM (R2 = 0.9725, RMSE = 1.7816), LSTM-MPA (R2 = 0.9940, RMSE = 0.8332), and LSTM-PSO (R2 = 0.9804, RMSE = 1.5221). Therefore, the proposed LSTM-MPA model can be employed as a reliable and accurate model for predicting CSFAG. Noteworthy, the results demonstrated the significance and influence of fly ash and sodium silicate solution chemical compositions on the compressive strength of FAGC. These variables could adequately present variations in the best mix designs discovered in earlier investigations. The suggested approach may also save time and money by accurately estimating the compressive strength of FAGC with low calcium content.

Retrieval of Desert Microwave Land Surface Emissivity Based on Machine Learning Algorithms

Based on the community radiative transfer model, ensemble tree-based random forest algorithm, and extreme gradient boosting tree algorithm, this study established a random forest retrieval model (RF) and an extreme gradient boosting tree retrieval model (XGBoost) for the microwave land surface emissivity by using ERA5 reanalysis data and the observed brightness temperature of 10.65 GHz vertical polarization from FY3C Microwave Radiation Imager-I. In addition, an optimized Bayesian regularized neural network retrieval model (M2_30NN) has also been established on the basis of the original neural network land surface emissivity retrieval model (M1_20NN). The results show that compared with the simulated brightness temperature of the original land surface emissivity, the simulated brightness temperature of the land surface emissivity from each retrieval model is not only significantly improved in the correlation coefficient with the observed brightness temperature (5.92% (M1_20NN), 4.23% (M2_30NN), 14.21% (RF), 13.07% (XGBoost)), but also in the evaluation indexes of root mean square error, mean absolute error and explained variance regression score in the training datasets. Furthermore, in terms of testing datasets and spatiotemporal independence test datasets, the retrieval results of RF and XGBoost models can capture the spatial distribution patterns that are consistent with observations well, and also show great numerical improvement compared with the original model. In general, the XGBoost retrieval model is the best, followed by the RF retrieval model.

Atomically dispersed high-loading Pt-Fe/C metal-atom foam catalyst for oxygen reduction in fuel cells

Designing efficient and stable single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) is essential to promote fuel cell commercialization. In this study, the Bayesian Regularization Neural Network (BRNN) has been used to determine the carbothermal shock (CTS) conditions for preparing high-loading Pt-Fe/C SACs. The BRNN model effectively identified a low reaction temperature of 283 °C for achieving high-loading (15 wt %) Pt-Fe/C SACs. Based on this model, we successfully synthesized Pt-Fe/C SACs with a metal mass content of 11.31 wt % using the CTS method. These ultrahigh content metal Pt-Fe/C SACs consisted of dispersed single atoms and foam-like atomic constructions, namely Pt-Fe/C atom foam catalysts (AFCs), rendered them promising candidates for electrocatalysis applications. The Pt-Fe/C AFCs exhibited good catalytic activity and durability toward ORR in alkaline conditions. The Pt-Fe/C AFCs were employed in a direct borohydride fuel cell (DBFC) as cathode catalyst, which resulted in a maximum power density of 214 mW cm−2 at 60 °C and demonstrated stable discharge for 40 h at room temperature. The electrocatalytic performance of the Pt-Fe/C AFCs surpassed that of low-loading Pt-Fe/C SACs and commercial Pt/C catalysts. The rapid ramp-up rate and the rapid cooling rate of the CTS process enabled the incorporation of high-loading Pt and Fe metal atoms into the graphitized carbon layer, resulting in an increased number of active sites of the Pt-Fe/C AFCs. This work provides an effective strategy for manufacturing efficient and stable SACs for practical applications in fuel cells.

Evaluating air quality and criteria pollutants prediction disparities by data mining along a stretch of urban-rural agglomeration includes coal-mine belts and thermal power plants

Air pollution has become a threat to human life around the world since researchers have demonstrated several effects of air pollution to the environment, climate, and society. The proposed research was organized in terms of National Air Quality Index (NAQI) and air pollutants prediction using data mining algorithms for particular timeframe dataset (01 January 2019, to 01 June 2021) in the industrial eastern coastal state of India. Over half of the study period, concentrations of PM2.5, PM10 and CO were several times higher than the NAQI standard limit. NAQI, in terms of consistency and frequency analysis, revealed that moderate level (ranges 101–200) has the maximum frequency of occurrence (26–158 days), and consistency was 36%–73% throughout the study period. The satisfactory level NAQI (ranges 51–100) frequency occurrence was 4–43 days with a consistency of 13%–67%. Poor to very poor level of air quality was found 13–50 days of the year, with a consistency of 9%–25%. Random Forest (RF), Support Vector Machine (SVM), Bagged Multivariate Adaptive Regression Splines (MARS) and Bayesian Regularized Neural Networks (BRNN) are the data mining algorithms, that showed higher efficiency for the prediction of PM2.5, PM10, NO2 and SO2 except for CO and O3 at Talcher and CO at Brajrajnagar. The Root Mean Square Error (RMSE) between observed and predicted values of PM2.5 (ranges 12.40–17.90) and correlation coefficient (r) (ranges 0.83–0.92) for training and testing data indicate about slightly better prediction of PM2.5 by RF, SVM, bagged MARS, and BRNN models at Talcher in comparison to PM2.5 RMSE (ranges 13.06–21.66) and r (ranges 0.64–0.91) at Brajrajnagar. However, PM10 (RMSE: 25.80–43.41; r: 0.57–0.90), NO2 (RMSE: 3.00–4.95; r: 0.42–0.88) and SO2 (RMSE: 2.78–5.46; r: 0.31–0.88) at Brajrajnagar are better than PM10 (RMSE: 35.40–55.33; r: 0.68–0.91), NO2 (RMSE: 4.99–9.11; r: 0.48–0.92), and SO2 (RMSE: 4.91–9.47; r: 0.20–0.93) between observed and predicted values of training and testing data at Talcher using RF, SVM, bagged MARS and BRNN models, respectively. Taylor plots demonstrated that these algorithms showed promising accuracy for predicting air quality. The findings will help scientific community and policymakers to understand the distribution of air pollutants to strategize reduction in air pollution and enhance air quality in the study region.

Possible Alternatives: Identifying and Quantifying Adulteration in Buffalo, Goat, and Camel Milk Using Mid-Infrared Spectroscopy Combined with Modern Statistical Machine Learning Methods.

Adulteration of higher priced milks with cheaper ones to obtain extra profit can adversely affect consumer health and the market. In this study, pure buffalo milk (BM), goat milk (GM), camel milk (CM), and their mixtures with 5-50% (vol/vol) cow milk or water were used. Mid-infrared spectroscopy (MIRS) combined with modern statistical machine learning was used for the discrimination and quantification of cow milk or water adulteration in BM, GM, and CM. Compared to partial least squares (PLS), modern statistical machine learning-especially support vector machines (SVM), projection pursuit regression (PPR), and Bayesian regularized neural networks (BRNN)-exhibited superior performance for the detection of adulteration. The best prediction models for the different predictive traits are as follows: The binary classification models developed by SVM resulted in differentiation of CM-cow milk, and GM/CM-water mixtures. PLS resulted in differentiation of BM/GM-cow milk and BM-water mixtures. All of the above models have 100% classification accuracy. SVM was used to develop multi-classification models for identifying the high and low proportions of cow milk in BM, GM, and CM, as well as the high and low proportions of water adulteration in BM and GM, with correct classification rates of 94%, 100%, 100%, 99%, and 100%, respectively. In addition, a PLS-based model was developed for identifying the high and low proportions of water adulteration in CM, with correct classification rates of 100%. A regression model for quantifying cow milk in BM was developed using PCA + BRNN, with RMSEV = 5.42%, and RV2 = 0.88. A regression model for quantifying water adulteration in BM was developed using PCA + PPR, with RMSEV = 1.70%, and RV2 = 0.99. Modern statistical machine learning improved the accuracy of MIRS in predicting BM, GM, and CM adulteration more effectively than PLS.

Data-Driven GWO-BRNN-Based SOH Estimation of Lithium-Ion Batteries in EVs for Their Prognostics and Health Management

Due to the complexity of the aging process, maintaining the state of health (SOH) of lithium-ion batteries is a significant challenge that must be overcome. This study presents a new SOH estimation approach based on hybrid Grey Wolf Optimization (GWO) with Bayesian Regularized Neural Networks (BRNN). The approach utilizes health features (HFs) extracted from the battery charging-discharging process. Selected external voltage and current characteristics from the charging-discharging process serve as HFs to explain the aging mechanism of the batteries. The Pearson correlation coefficient, the Kendall rank correlation coefficient, and the Spearman rank correlation coefficient are then employed to select HFs that have a high degree of association with battery capacity. In this paper, GWO is introduced as a method for optimizing and selecting appropriate hyper-p parameters for BRNN. GWO-BRNN updates the population through mutation, crossover, and screening operations to obtain the globally optimal solution and improve the ability to conduct global searches. The validity of the proposed technique was assessed by examining the NASA battery dataset. Based on the simulation results, the presented approach demonstrates a higher level of accuracy. The proposed GWO-BRNN-based SOH estimation achieves estimate assessment indicators of less than 1%, significantly lower than the estimated results obtained by existing approaches. The proposed framework helps develop electric vehicle battery prognostics and health management for the widespread use of eco-friendly and reliable electric transportation.

Ensemble Learning for Blending Gridded Satellite and Gauge-Measured Precipitation Data

Regression algorithms are regularly used for improving the accuracy of satellite precipitation products. In this context, satellite precipitation and topography data are the predictor variables, and gauged-measured precipitation data are the dependent variables. Alongside this, it is increasingly recognised in many fields that combinations of algorithms through ensemble learning can lead to substantial predictive performance improvements. Still, a sufficient number of ensemble learners for improving the accuracy of satellite precipitation products and their large-scale comparison are currently missing from the literature. In this study, we work towards filling in this specific gap by proposing 11 new ensemble learners in the field and by extensively comparing them. We apply the ensemble learners to monthly data from the PERSIANN (Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks) and IMERG (Integrated Multi-satellitE Retrievals for GPM) gridded datasets that span over a 15-year period and over the entire contiguous United States (CONUS). We also use gauge-measured precipitation data from the Global Historical Climatology Network monthly database, version 2 (GHCNm). The ensemble learners combine the predictions of six machine learning regression algorithms (base learners), namely the multivariate adaptive regression splines (MARS), multivariate adaptive polynomial splines (poly-MARS), random forests (RF), gradient boosting machines (GBM), extreme gradient boosting (XGBoost) and Bayesian regularized neural networks (BRNN), and each of them is based on a different combiner. The combiners include the equal-weight combiner, the median combiner, two best learners and seven variants of a sophisticated stacking method. The latter stacks a regression algorithm on top of the base learners to combine their independent predictions. Its seven variants are defined by seven different regression algorithms, specifically the linear regression (LR) algorithm and the six algorithms also used as base learners. The results suggest that sophisticated stacking performs significantly better than the base learners, especially when applied using the LR algorithm. It also beats the simpler combination methods.

A novel radial basis procedure for the SIRC epidemic delay differential model

The purpose of this work is to construct a reliable stochastic framework for solving the SIRC delay differential epidemic system, i.e. SIRC-DDES that is based on the coronavirus dynamics. The design of radial basis (RB) transfer function with the optimization of Bayesian regularization neural network (RB-BRNN) is presented to solve the SIRC-DDES. The SIRC-DDES is classified into susceptible , infected , recovered and cross-immune . The exactness of the RB-BRNN is performed for three cases of SIRC-DDES by using the performances of the obtained and reference results. The mean square error is reduced by using the training, testing and substantiation performances with the reference solutions. The small values of the absolute error around 10−07 to 10−08 and different statistical operator performances based on the error histogram values, transitions of state investigations, correlation and regression tests also approve the accuracy of the proposed technique.

ICA-LightGBM Algorithm for Predicting Compressive Strength of Geo-Polymer Concrete

The main goal of the present study is to investigate the capability of hybridizing the imperialist competitive algorithm (ICA) with an intelligent, robust, and data-driven technique named the light gradient boosting machine (LightGBM) to estimate the compressive strength of geo-polymer concrete (CSGCo). The hyper-parameters of the LightGBM algorithm have been optimized based on ICA and its accuracy improved. The obtained results from the proposed hybrid ICA-LightGBM are compared with the traditional LightGBM model as well as four different topologies of artificial neural networks (ANN) comprising a multi-layer perceptron neural network (MLP), radial basis function (RBF), generalized feed-forward neural network (GFFNN), and Bayesian regularized neural network (BRNN). The results of these models were compared based on three evaluation indices of R2, RMSE, and VAF for providing an objective evaluation of the performance and capability of the predictive models. Concerning the outcomes, the ICA-LightGBM with the R2 of (0.9871 and 0.9805), RMSE of (0.4703 and 1.3137), and VAF of (98.5773 and 98.0397) for training and testing phases, respectively, was a superior predictor to estimate the CSGCo compared to the LightGBM with the R2 of (0.9488 and 0.9478), RMSE of (0.9532 and 2.1631), and VAF of (94.3613 and 94.5173); the MLP with the R2 of (0.9067 and 0.8959), RMSE of (1.3093 and 3.3648), and VAF of (88.9888 and 84.9125); the RBF with the R2 of (0.8694 and 0.8055), RMSE of (1.4703 and 5.0309), and VAF of (86.3122 and 66.1888); the BRNN with the R2 of (0.9212 and 0.9107), RMSE of (1.1510 and 2.6569), and VAF of (91.4168 and 90.5854); and the GFFNN with the R2 of (0.9144 and 0.8925), RMSE of (1.1525 and 2.9415), and VAF of (91.4092 and 88.9088). Hence, the proposed ICA-LightGBM algorithm can be efficiently used in anticipating the CSGCo.

Novel design of intelligent Bayesian networks to study the impact of magnetic field and Joule heating in hybrid nanomaterial flow with applications in medications for blood circulation

In current study, the effects of magnetic field and Joule heating in flow of (Cu+CuO) hybrid nanomaterial model with blood as a base fluid is analyzed effectively by exploiting novel design of intelligent Bayesian regularization neural networks (IBRNN) for several important physical aspects. Mathematical models of the systems are derived by considering the small Eckert and Prandtl numbers with thermo-physical characteristics of Cu+CuO/blood hybrid nanoliquids while the heat emission/absorption is added in energy equation to maintain the temperature for blood flow. The effects of various parameters of interest like wall deformation rate, Joule heating parameter, magnetic parameter, volume fraction and permeability parameter on velocity and temperature distribution have been studied using viable numerical approach of Adams method as well as presented intelligent Bayesian networks. The reliability of the Bayesian networks is endorsed by convergence plots of MSEs, effective outputs of adaptive controlling parameters of optimization algorithm, error based histograms, and regression statistics for exhaustive simulations studies in case of sundry scenarios.

Comparing Algorithms for Estimation of Aboveground Biomass in Pinus yunnanensis

Comparing algorithms are crucial for enhancing the accuracy of remote sensing estimations of forest biomass in regions with high heterogeneity. Herein, Sentinel 2A, Sentinel 1A, Landsat 8 OLI, and Digital Elevation Model (DEM) were selected as data sources. A total of 12 algorithms, including 7 types of learners, were utilized for estimating the aboveground biomass (AGB) of Pinus yunnanensis forest. The results showed that: (1) The optimal algorithm (Extreme Gradient Boosting, XGBoost) was selected as the meta-model (referred to as XGBoost-stacking) of the stacking ensemble algorithm, which integrated 11 other algorithms. The R2 value was improved by 0.12 up to 0.61, and RMSE was decreased by 4.53 Mg/ha down to 39.34 Mg/ha compared to the XGBoost. All algorithms consistently showed severe underestimation of AGB in the Pinus yunnanensis forest of Yunnan Province when AGB exceeded 100 Mg/ha. (2) XGBoost-Stacking, XGBoost, BRNN (Bayesian Regularized Neural Network), RF (Random Forest), and QRF (Quantile Random Forest) have good sensitivity to forest AGB. QRNN (Quantile Regression Neural Network), GP (Gaussian Process), and EN (Elastic Network) have more outlier data and their robustness was poor. SVM-RBF (Radial Basis Function Kernel Support Vector Machine), k-NN (K Nearest Neighbors), and SGB (Stochastic Gradient Boosting) algorithms have good robustness, but their sensitivity was poor, and QRF algorithms and BRNN algorithm can estimate low values with higher accuracy. In conclusion, the XGBoost-stacking, XGBoost, and BRNN algorithms have shown promising application prospects in remote sensing estimation of forest biomass. This study could provide a reference for selecting the suitable algorithm for forest AGB estimation.

Estimating the Aboveground Biomass of Various Forest Types with High Heterogeneity at the Provincial Scale Based on Multi-Source Data

It is important to improve the accuracy of models estimating aboveground biomass (AGB) in large areas with complex geography and high forest heterogeneity. In this study, k-nearest neighbors (k-NN), gradient boosting machine (GBM), random forest (RF), quantile random forest (QRF), regularized random forest (RRF), and Bayesian regularization neural network (BRNN) machine learning algorithms were constructed to estimate the AGB of four forest types based on environmental factors and the variables selected by the Boruta algorithm in Yunnan Province and using integrated Landsat 8 OLI and Sentinel 2A images. The results showed that (1) DEM was the most important variable for estimating the AGB of coniferous forests, evergreen broadleaved forests, deciduous broadleaved forests, and mixed forests; while the vegetation index was the most important variable for estimating deciduous broadleaved forests, the climatic factors had a higher variable importance for estimating coniferous and mixed forests, and texture features and vegetation index had a higher variable importance for estimating evergreen broadleaved forests. (2) In terms of specific model performance for the four forest types, RRF was the best model both in estimating the AGB of coniferous forests and mixed forests; the R2 and RMSE for coniferous forests were 0.63 and 43.23 Mg ha−1, respectively, and the R2 and RMSE for mixed forests were 0.56 and 47.79 Mg ha−1, respectively. BRNN performed the best in estimating the AGB of evergreen broadleaved forests; the R2 was 0.53 and the RMSE was 68.16 Mg ha−1. QRF was the best in estimating the AGB of deciduous broadleaved forests, with R2 of 0.43 and RMSE of 45.09 Mg ha−1. (3) RRF was the best model for the four forest types according to the mean values, with R2 and RMSE of 0.503 and 52.335 Mg ha−1, respectively. In conclusion, different variables and suitable models should be considered when estimating the AGB of different forest types. This study could provide a reference for the estimation of forest AGB based on remote sensing in complex terrain areas with a high degree of forest heterogeneity.

Postharvest Treatments of Hass Avocado (Persea americana Mill.) and Estimation of Its Quality Using Hyperspectral Imaging (HSI)

Avocados’ shelf life is limited and difficult to monitor. This study evaluated the performance of chitosan coatings (1.5 and 2% w/v, T1 and T2) on avocados’ quality and shelf life against samples untreated (C) and treated with an ethylene inhibitor (1-MCP, M). Hyperspectral imaging (HSI) coupled with machine learning (ML) techniques was also evaluated to estimate Hass avocados’ quality indicators. Sensorial, physicochemical, and metabolic characteristics were measured using standard procedures. While T2 samples exhibited undesirable changes (i.e., uneven color and heterogeneous firmness), T1 behaved similarly to C. However, neither treatment could delay senescence as much as 1-MCP (42 vs ≤ 33 days). In general, Bayesian regularization neural networks (BRNNs) outperformed the other tested ML techniques in estimating quality attributes from HSI features, allowing for real-time nondestructive assessment of food quality. Adverse effects of chitosan coatings on avocados’ physiology were identified, which can inform the development of films with improved performance.

Imaging Sensor-Based High-Throughput Measurement of Biomass Using Machine Learning Models in Rice

Phenomics technologies have advanced rapidly in the recent past for precision phenotyping of diverse crop plants. High-throughput phenotyping using imaging sensors has been proven to fetch more informative data from a large population of genotypes than the traditional destructive phenotyping methodologies. It provides accurate, high-dimensional phenome-wide big data at an ultra-super spatial and temporal resolution. Biomass is an important plant phenotypic trait that can reflect the agronomic performance of crop plants in terms of growth and yield. Several image-derived features such as area, projected shoot area, projected shoot area with height constant, estimated bio-volume, etc., and machine learning models (single or multivariate analysis) are reported in the literature for use in the non-invasive prediction of biomass in diverse crop plants. However, no studies have reported the best suitable image-derived features for accurate biomass prediction, particularly for fully grown rice plants (70DAS). In this present study, we analyzed a subset of rice recombinant inbred lines (RILs) which were developed from a cross between rice varieties BVD109 × IR20 and grown in sufficient (control) and deficient soil nitrogen (N stress) conditions. Images of plants were acquired using three different sensors (RGB, IR, and NIR) just before destructive plant sampling for the quantitative estimation of fresh (FW) and dry weight (DW). A total of 67 image-derived traits were extracted and classified into four groups, viz., geometric-, color-, IR- and NIR-related traits. We identified a multimodal trait feature, the ratio of PSA and NIR grey intensity as estimated from RGB and NIR sensors, as a novel trait for predicting biomass in rice. Among the 16 machine learning models tested for predicting biomass, the Bayesian regularized neural network (BRNN) model showed the maximum predictive power (R2 = 0.96 and 0.95 for FW and DW of biomass, respectively) with the lowest prediction error (RMSE and bias value) in both control and N stress environments. Thus, biomass can be accurately predicted by measuring novel image-based parameters and neural network-based machine learning models in rice.

Novel computational protocol to support transfemoral prosthetic alignment procedure using machine learning techniques

BackgroundThe prosthetic alignment procedure considers biomechanical, anatomical and comfort characteristics of the amputee to achieve an acceptable gait. Prosthetic malalignment induces long-term disease. The assessment of alignment is highly variable and subjective to the experience of the prosthetist, so the use of machine learning could assist the prosthetist during the judgment of optimal alignment. Research objectiveTo assist the prosthetist during the assessment of prosthetic alignment using a new computational protocol based on machine learning. MethodsSixteen transfemoral amputees were recruited for training and validation of the alignment protocol. Four misalignments and one nominal alignment were performed. Eleven prosthetic limb ground reaction force parameters were recorded. A support vector machine with a Gaussian kernel radial basis function and a Bayesian regularization neural network were trained to predict the alignment condition, as well as the magnitude and angle of required to align the prosthesis correctly. The alignment protocol was validated by one junior and one senior prosthetist during the prosthetic alignment of two transfemoral amputees. ResultsThe support vector machine-based model detected the nominal alignment 92.6 % of the time. The neural network recovered 94.11 % of the angles needed to correct the prosthetic misalignment with a fitting error of 0.51°. During the validation of the alignment protocol, the computational models and the prosthetists agreed on the alignment assessment. The gait quality evaluated by the prosthetists reached a satisfaction level of 8/10 for the first amputee and 9.6/10 for the second amputee. ImportanceThe new computational prosthetic alignment protocol is a tool that helps the prosthetist during the prosthetic alignment procedure thereby decreasing the likelihood of gait deviations and musculoskeletal diseases associated with misalignments and consequently improving the amputees-prosthesis adherence.

Comparing Global Sentinel-2 Land Cover Maps for Regional Species Distribution Modeling

Mapping the spatial and temporal dynamics of species distributions is necessary for biodiversity conservation land-use planning decisions. Recent advances in remote sensing and machine learning have allowed for high-resolution species distribution modeling that can inform landscape-level decision-making. Here we compare the performance of three popular Sentinel-2 (10-m) land cover maps, including dynamic world (DW), European land cover (ELC10), and world cover (WC), in predicting wild bee species richness over southern Norway. The proportion of grassland habitat within 250 m (derived from the land cover maps), along with temperature and distance to sandy soils, were used as predictors in both Bayesian regularized neural network and random forest models. Models using grassland habitat from DW performed best (RMSE = 2.8 ± 0.03; average ± standard deviation across models), followed by ELC10 (RMSE = 2.85 ± 0.03) and WC (RMSE = 2.87 ± 0.02). All satellite-derived maps outperformed a manually mapped Norwegian land cover dataset called AR5 (RMSE = 3.02 ± 0.02). When validating the model predictions of bee species richness against citizen science data on solitary bee occurrences using generalized linear models, we found that ELC10 performed best (AIC = 2278 ± 4), followed by WC (AIC = 2367 ± 3), and DW (AIC = 2376 ± 3). While the differences in RMSE we observed between models were small, they may be significant when such models are used to prioritize grassland patches within a landscape for conservation subsidies or management policies. Partial dependencies in our models showed that increasing the proportion of grassland habitat is positively associated with wild bee species richness, thereby justifying bee conservation schemes that aim to enhance semi-natural grassland habitat. Our results confirm the utility of satellite-derived land cover maps in supporting high-resolution species distribution modeling and suggest there is scope to monitor changes in species distributions over time given the dense time series provided by products such as DW.

Photovoltaic Power Prediction Based on VMD-BRNN-TSP

Overfitting often occurs in neural network training, and neural networks with higher generalization ability are less prone to this phenomenon. Aiming at the problem that the generalization ability of photovoltaic (PV) power prediction model is insufficient, a PV power time-sharing prediction (TSP) model combining variational mode decomposition (VMD) and Bayesian regularization neural network (BRNN) is proposed. Firstly, the meteorological sequences related to the output power are selected by mutual information (MI) analysis. Secondly, VMD processing is performed on the filtered sequences, which is aimed at reducing the non-stationarity of the data; then, normalized cross-correlation (NCC) and signal-to-noise ratio (SNR) between the components obtained by signal decomposition and the original data are calculated, after which the key influencing factors are screened out to eliminate the correlation and redundancy of the data. Finally, the filtered meteorological sequences are divided into two datasets based on whether the irradiance of the day is zero or not. Meanwhile, the predictions are performed using BRNN for each of the two datasets. Then, the results are reordered in chronological order, and the prediction of PV power is realized conclusively. It was experimentally verified that the mean absolute value error (MAE) of the method proposed in this paper is 0.1281, which is reduced by 40.28% compared with the back propagation neural network (BPNN) model on the same dataset, the mean squared error (MSE) is 0.0962, and the coefficient of determination (R2) is 0.9907. Other error indicators also confirm that VMD is of much significance and TSP is contributive.