Basic Nitrogen Atom Research Articles

Antibacterial Activity and Antifungal Activity of Monomeric Alkaloids.

Scientists are becoming alarmed by the rise in drug-resistant bacterial and fungal strains, which makes it more costly, time-consuming, and difficult to create new antimicrobials from unique chemical entities. Chemicals with pharmacological qualities, such as antibacterial and antifungal elements, can be found in plants. Alkaloids are a class of chemical compounds found in nature that mostly consist of basic nitrogen atoms. Biomedical science relies heavily on alkaloid compounds. Based on 241 papers published in peer-reviewed scientific publications within the last ten years (2014-2024), we examined 248 natural or synthesized monomeric alkaloids that have antifungal and antibacterial activity against Gram-positive and Gram-negative microorganisms. Based on their chemical structure, the chosen alkaloids were divided into four groups: polyamine alkaloids, alkaloids with nitrogen in the side chain, alkaloids with nitrogen heterocycles, and pseudoalkaloids. With MIC values of less than 1 µg/mL, compounds 91, 124, 125, 136-138, 163, 164, 191, 193, 195, 205 and 206 shown strong antibacterial activity. However, with MIC values of below 1 µg/mL, compounds 124, 125, 163, 164, 207, and 224 demonstrated strong antifungal activity. Given the rise in antibiotic resistance, these alkaloids are highly significant in regard to their potential to create novel antimicrobial drugs.

Mechanism-Based Allylic Carbasugar Chlorides That Form Covalent Intermediates with α- and β-Galactosidases.

Glycoside hydrolases have been implicated in a wide range of human conditions including lysosomal storage diseases. Consequently, many researchers have directed their efforts towards identifying new classes of glycoside hydrolase inhibitors, both synthetic and from natural sources. A large percentage of such inhibitors are reversible competitive inhibitors that bind in the active site often due to them possessing structural features, often a protonatable basic nitrogen atom, that mimic the enzymatic transition state. We report that mechanism-based small molecule galacto-like configured cyclohexenyl carbasugars form reversible covalent complexes with both α-galactosidase and β-galactosidase. In addition, we show that the β-galactosidase from Aspergillus oryzae reacts with three different carbasugar inhibitors, with three different second-order rate constants (kinact/Ki), to give the same enzyme-carbasugar covalent intermediate. The surprising observation that the α-galacto-configured inhibitor covalently labels the A. oryzae β-galactosidase highlights the catalytic versatility of glycoside hydrolases. We expect that cyclohexenyl covalent inhibitors will become an important class of compounds in the chemical biologist's tool box.

Dicationic salt of β-alkyl substituted sapphyrin-type porphyrinoid: Acid-basic properties, thermal stability and quantum-chemical calculations

The UV-Vis spectra of the dicationic salt of 2,3,7,13,17,18,18,22,23-octamethyl-8,12-diethylsapphyrin {H5β-Me8Et2Sap[Formula: see text](Cl[Formula: see text]} in solutions with different polarity and acid-basic properties have been investigated. The tautomeric and acid-base equilibria of H5β-Me8Et2Sap[Formula: see text](Cl[Formula: see text] in the presence of organic bases have been examined by spectrophotometric titration. It was demonstrated that an addition of small amounts of 1,8-diazabicyclo[5.4.0]undecene (DBU) and tetramethylammonium hydroxide (Me4NOH) dissolved in methylene chloride (DCM) and MeOH, respectively results in a stepwise detachment of two protons from the basic nitrogen atoms of the macrocycle, with no anionic forms of sapphyrin being registered. The results obtained were supported using quantum-chemical calculations (DFT, B3LYP, cc-pVDZ including NBO analysis). The interactions of 2,3,7,13,17,18,18,22,23-octamethyl-8,12-diethylsapphyrin (H3β-Me8Et2Sap) with a series of compounds of different acidity and basicity were studied and the formation of very weak hydrogen bond of H3β-Me8Et2Sap as NH-acid with N,N-dimethylformamide (DMF) molecule with the value of the interaction energy (E[Formula: see text] equal -16.40 kJ/mol was revealed. The low acidity of bonds NH in the sapphyrin molecule was confirmed on the base of thermogravimetric data obtained for the solid samples of H5β-Me8Et2Sap[Formula: see text](Cl[Formula: see text] evaporated from DMF and DCM concentrated solutions.

PROTIC POLYMERIC IONIC LIQUID OF A BLOCK OLIGOMERIC STRUCTURE WITH IONIC BONDS IN THE MAIN CHAIN

A method for the synthesis of protic polymeric ionic liquid (PIL) of a block oligomeric structure with ionic bonds in the main chain, which turns into a liquid state at temperatures below 50 °C, was developed. Ionic bonding was used to form a polymer chain. It was formed as a result of neutralization reaction between oligomers of telechelic structure with terminal acidic and basic groups. A new linear oligomer containing basic tertiary nitrogen atoms at the ends of the oligoether chain (PEO-2NEt2) was obtained by reaction of α,ω-diglycidyl ether of polyethylene glycol MW 1000 with N,N-diethylamine. A linear oligomer with terminal sulfonic acid groups (PEO-2SO3H), which is a product of the interaction of polyethylene glycol (MW 1000) with the cyclic anhydride of 2-sulfobenzoic acid, was used as an acidic linear oligomer. The synthesis of PIL [PEO-2H-2NEt2]2+ [PEO-2SO3]2- was carried out by neutralization of basic oligomer PEO-2NEt2 with the acidic oligomer PEO-2SO3H in their molar ratio of 1:1. The structure of the obtained compound was characterized by the methods of FTIR and 1H NMR spectroscopy. According to the DSC data, the synthesized PIL contains an amorphous phase with a glass transition temperature of -49.7 °С and a crystalline phase with a melting temperature of 34.5 °С. The decomposition onset temperature corresponding to 5% weight loss is 271 °C according to the TGA. The ionic conductivity of PIL studied by dielectric relaxation spectroscopy under anhydrous conditions in the range from 40 °C to 100 °C increases with increase in temperature and reaches 2.7·10-4 S/cm. The resulting compound is promising as a proton-conducting medium for various electrochemical devices.

Synergistic Linker and Linkage of Covalent Organic Frameworks for Enhancing Gold Capture.

The tunable pore walls and skeletons render covalent organic frameworks (COFs) as promising absorbents for gold (Au) ion. However, most of these COFs suffered from low surface areas hindering binding sites exposed and weak binding interaction resulting in sluggish kinetic performance. In this study, COFs have been constructed with synergistic linker and linkage for high-efficiency Au capture. The designed COFs (PYTA-PZDH-COF and PYTA-BPDH-COF) with pyrazine or bipyridine as linkers showed high surface areas of 1692 and 2076 m2 g‒1, providing high exposed surface areas for Au capture. In addition, the Lewis basic nitrogen atoms from the linkers and linkages are easily hydronium, which enabled to fast trap Au via coulomb force. The PYTA-PZDH-COF and PYTA-BPDH-COF showed maximum Au capture capacities of 2314 and 1810mg g-1, higher than other reported COFs. More importantly, PYTA-PZDH-COF are capable of rapid adsorption kinetics with achieving 95% of maximum binding capacity in 10min. The theoretical calculation revealed that the nitrogen atoms in linkers and linkages from both COFs are simultaneously hydronium, and then the protonated PYTA-PZDH-COF are more easily binding the AuCl4 ‒, further accelerating the binding process. This study gives the a new insight to design COFs for ion capture.

Mechanistic insights into C(sp2)-H activation in 1-Phenyl-4-vinyl-1H-1,2,3-triazole derivatives: a theoretical study with palladium acetate catalyst.

The activation of C-H bonds is a fundamental process in synthetic organic chemistry, which enables their replacement by highly reactive functional groups. Coordination compounds serve as effective catalysts for this purpose, as they facilitate chemical transformations by interacting with C-H bonds. A comprehensive understanding of the mechanism of activation of this type of bond lays the foundation for the development of efficient protocols for cross-coupling reactions. We explored the activation of C(sp2)-H bonds in 1-Phenyl-4-vinyl-1H-1,2,3-triazole derivatives with CH3, OCH3, and NO2 substituents in the para position of the phenyl ring, using palladium acetate as catalyst. The studied reaction is the first step for subsequent conjugation of the triazoles with naphthoquinones in a Heck-type reaction to create a C-C bond. The basic nitrogen atoms of the 1,2,3-triazole coordinate preferentially with the cationic palladium center to form an activated species. A concerted proton transfer from the terminal vinyl carbon to one of the acetate ligands with low activation energy is the main step for the C(sp2)-H activation. This study offers significant mechanistic insights for enhancing the effectiveness of C(sp2)-H activation protocols in organic synthesis. All calculations were performed using the Gaussian 09 software package and density functional theory (DFT). The structures of all reaction path components were fully optimized using the CAM-B3LYP functional with the Def2-SVP basis set. The optimized geometries were analyzed by computing the second-order Hessian matrix to confirm that the corresponding minimum or transition state was located. To account for solvent effects, the Polarizable Continuum Model of the Integral Equation Formalism (IEFPCM) with water as the solvent was used.

Arylamines QSAR-Based Design and Molecular Dynamics of New Phenylthiophene and Benzimidazole Derivatives with Affinity for the C111, Y268, and H73 Sites of SARS-CoV-2 PLpro Enzyme.

A non-structural SARS-CoV-2 protein, PLpro, is involved in post-translational modifications in cells, allowing the evasion of antiviral immune response mechanisms. In this study, potential PLpro inhibitory drugs were designed using QSAR, molecular docking, and molecular dynamics. A combined QSAR equation with physicochemical and Free-Wilson descriptors was formulated. The r2, q2, and r2test values were 0.833, 0.770, and 0.721, respectively. From the equation, it was found that the presence of an aromatic ring and a basic nitrogen atom is crucial for obtaining good antiviral activity. Then, a series of structures for the binding sites of C111, Y268, and H73 of PLpro were created. The best compounds were found to exhibit pIC50 values of 9.124 and docking scoring values of -14 kcal/mol. The stability of the compounds in the cavities was confirmed by molecular dynamics studies. A high number of stable contacts and good interactions over time were exhibited by the aryl-thiophenes Pred14 and Pred15, making them potential antiviral candidates.

Ring-Opening Polymerization of rac-β-Butyrolactone Promoted by New Tetradentate Thioether-Amide Ligand-Type Zinc Complexes.

In this work, thioether-amide ligands featuring a combination of hard amide groups with soft donor groups have been employed to develop new zinc catalysts for the ring-opening polymerization of cyclic esters. All complexes were prepared in high yields through alkane elimination reactions with diethyl zinc and characterized using nuclear magnetic resonance (NMR) spectroscopy. Density functional theory (DFT) characterization provided insight into the parameters that influence catalytic activity, such as steric hindrance at the metal center, Lewis acidity and electronic density of thioether-amide ligands. In the presence of one equivalent of isopropanol, all complexes were active in the ring-opening polymerization of rac-β-butyrolactone. Quantitative conversion of 100 monomer equivalents was achieved within 1 h at 80 °C in a toluene solution. Number-average molecular weights increased linearly with monomer conversion; the values were in optimal agreement with those expected, and polydispersity index values were narrow and relatively constant throughout the course of polymerization. The most active complex was also effective in the ring-opening polymerization of ε-caprolactone and L-lactide. To propose a reliable reaction path, DFT calculations were undertaken. In the first step of the reaction, the acidic proton of the alcohol is transferred to the basic nitrogen atom of the amide ligand coordinated to the zinc ion. This leads to the alcoholysis of the Zn-N bond and the formation of an alcoholate derivative that starts the polymerization. In subsequent steps, the reaction follows the classical coordination-insertion mechanism.

Development and validation of an analytical method for the simultaneous determination of 12 ergot, 2 tropane, and 28 pyrrolizidine alkaloids in cereal-based food by LC-MS/MS

Alkaloids are naturally occurring compounds containing basic nitrogen atoms. They are biosynthesized mainly by plants but also by some fungi species. Many alkaloids are toxic to humans and animals, and they have been classified as food contaminants. Among them, ergot, tropane, and pyrrolizidine alkaloids have maximum levels in foods, established by the Commission Regulation (EU) 2023/915. In this study, an analytical method was successfully developed and validated for the simultaneous determination of 42 ergot, tropane, and pyrrolizidine alkaloids and their N-oxides in cereal-based food. The method includes QuEChERS-based extraction followed by liquid chromatography coupled with tandem mass spectrometry. The proposed method was validated providing recoveries ranging from 71 to 119 %, intra- and inter-day precision lower than 19 %, and limits of quantification between 0.5 and 1.0 µg kg−1. Finally, the analysis of reference materials coming from FAPAS proficiency tests demonstrated the suitability for purpose of the methodology (z-scores < 2). Nine cereal-based products samples were analyzed of which ergot alkaloids were detected in two of them, while one sample showed the presence of three pyrrolizidine alkaloids.

Imidazo-Pyrazole-Loaded Palmitic Acid and Polystyrene-Based Nanoparticles: Synthesis, Characterization and Antiproliferative Activity on Chemo-Resistant Human Neuroblastoma Cells.

Neuroblastoma (NB) is a childhood cancer, commonly treated with drugs, such as etoposide (ETO), whose efficacy is limited by the onset of resistance. Here, aiming at identifying new treatments for chemo-resistant NB, the effects of two synthesized imidazo-pyrazoles (IMPs) (4G and 4I) were investigated on ETO-sensitive (HTLA-230) and ETO-resistant (HTLA-ER) NB cells, detecting 4I as the more promising compound, that demonstrated IC50 values lower than those of ETO on HTLA ER. Therefore, to further improve the activity of 4I, we developed 4I-loaded palmitic acid (PA) and polystyrene-based (P5) cationic nanoparticles (P5PA-4I NPs) with high drug loading (21%) and encapsulation efficiency (97%), by a single oil-in-water emulsification technique. Biocompatible PA was adopted as an emulsion stabilizer, while synthesized P5 acted as an encapsulating agent, solubilizer and hydrophilic-lipophilic balance (HLB) improver. Optic microscopy and cytofluorimetric analyses were performed to investigate the micromorphology, size and complexity distributions of P5PA-4I NPs, which were also structurally characterized by chemometric-assisted Fourier transform infrared spectroscopy (FTIR). Potentiometric titrations allowed us to estimate the milliequivalents of PA and basic nitrogen atoms present in NPs. P5PA-4I NPs afforded dispersions in water with excellent buffer capacity, essential to escape lysosomal degradation and promote long residence time inside cells. They were chemically stable in an aqueous medium for at least 40 days, while in dynamic light scattering (DLS) analyses, P5PA-4I showed a mean hydrodynamic diameter of 541 nm, small polydispersity (0.194), and low positive zeta potentials (+8.39 mV), assuring low haemolytic toxicity. Biological experiments on NB cells, demonstrated that P5PA-4I NPs induced ROS-dependent cytotoxic effects significantly higher than those of pristine 4I, showing a major efficacy compared to ETO in reducing cell viability in HTLA-ER cells. Collectively, this 4I-based nano-formulation could represent a new promising macromolecular platform to develop a new delivery system able to increase the cytotoxicity of the anticancer drugs.

Copper MOFs performance in the cycloaddition reaction of CO2 and epoxides

The research in advanced materials for effective CO2 capture and conversion is an imperative duty for the next years. In this sense MOF materials are being intensively tested for this purpose. Herein, seven different copper-based MOF materials with different functional organic groups in their linkers have been assessed to comprehend some structural features that influence the CO2 transformation via cycloaddition reaction with epoxides: Cu-URJC-1 (tetrazole group), Cu-URJC-8 (primary amine group), Cu-MOF-74 (hydroxyl group), JUC-62 (azo group), PCN-16 (triple bond group), HNUST-1 (amide group) and HKUST-1. When epichlorohydrin was used as a substrate, Cu-URJC-8 produced the best epoxide conversion (90%) and selectivity to cyclic carbonate (>99%), despite showing a modest surface area. This result can be explained by the higher basicity of primary amines than other basic functional organic groups of the MOFs. However, when styrene oxide was used as substrate, Cu-URJC-1 led to the best reaction results with a conversion and selectivity toward cyclic carbonate of 60 and 86%, respectively. This result was achieved because this material presents the synergic effect of having in its flexible structure 12 Å channels, that favors the styrene oxide diffusion, and a great number of basic nitrogen atoms, which can increase the reactivity of carbon dioxide. In summary, the presence of nitrogen atoms in the organic linker increases the CO2 conversion by promoting the reactivity of this molecule.

Light-Promoted Basic Nitrogen Unmasking in Arene Ruthenium Complexes Derived from Z-Configured 2,2'-Azobispyridine.

Two novel 2,2'-azobispyridine derivatives bearing N-dialkylamino substituents at position 4,4' were synthesized and their E-Z photoswitching behavior was characterized by combination of 1 H- and 13 C NMR spectroscopy, UV-Vis absorption and DFT calculations. Both isomers act as ligands towards arene-RuII centers, leading either to E-configured 5-membered chelates (involving coordination of nitrogen atoms from N=N bond and pyridine) or to the uncommon Z-configured 7-membered chelates (involving coordination of nitrogen atoms from both pyridines). The latter show good stability in the dark, allowing single crystal X-ray diffraction study to be reported here for the first time. All synthesized Z-configured arene-RuII complexes undergo irreversible photo-isomerization to their corresponding E isomers with rearrangement of their coordination pattern. This property was advantageously exploited for the light-promoted unmasking of a basic nitrogen atom of the ligand.

Total Synthesis of Spiroketal Alkaloids Lycibarbarines A-C.

Lycibarbarines A-C are spirocyclic alkaloids with a unique tetracyclic framework, consisting of tetrahydroquinoline and spiro-fused oxazine-sugar spiroketal subunits. The first total syntheses of lycibarbarines A-C were achieved over 10 steps (longest linear sequence) each. Through this work, it was discovered that the spiroketal unit of lycibarbarines A-C exhibits unusually high resistance to acid-mediated isomerization and epimerization, likely due to the basic nitrogen atom. As such, the lycibarbarines present an interesting case study in preventing the interconversion of spiroketal isomers, which may prove to be instructive in efforts to obtain nonthermodynamic spiroketal frameworks.

Dual-Ligand Catalyst for the Nondirected C-H Olefination of Heteroarenes.

Pd(II)-catalyzed nondirected C-H functionalization of heteroarenes is a significant challenge for the following reasons: poor reactivity of electron-deficient heterocycles and the unproductive coordination of Lewis basic nitrogen atoms. Existing methodologies using palladium catalysis often employ a large excess of heterocycle substrates to overcome these hurdles. Despite recent advances in nondirected functionalization of arenes that allow them to be used as limiting reagents, the reaction conditions are incompatible with electron-deficient heteroarenes. Herein we report a dual-ligand catalyst that enables Pd(II)-catalyzed nondirected C-H olefination of heteroarenes without using a large excess of substrate. In general, the use of 1-2 equiv of substrates was sufficient to obtain synthetically useful yields. The reactivity was rationalized by the synergy between two types of ligands: a bidentate pyridine-pyridone ligand promotes C-H cleavage; the monodentate heterocycle substrate acts as a second ligand to form a cationic Pd(II) complex that has high affinity for arenes. The proposed dual-ligand cooperation is supported by a combination of X-ray, kinetics, and control experiments.

Site‐Selective C−H Alkenylation of N‐Heteroarenes by Ligand‐Directed Co/Al and Co/Mg Cooperative Catalysis**

AbstractWe report herein the design and development of Co/Al and Co/Mg bimetallic catalysts, supported by a phosphine/secondary phosphine oxide (PSPO) bifunctional ligand, for the site‐selective C−H alkenylation of nitrogen‐containing heteroarenes with alkynes. These catalysts enable the alkenylation of pyridine, pyridone, and imidazo[1,2‐a]pyridine derivatives at the C−H site proximal to the Lewis basic nitrogen or oxygen atom, which represents a selectivity profile distinct from that of the previously developed cobalt‐diphosphine/aluminum catalyst. The alkenylated products were obtained in moderate to good yields using various heterocycles and differently substituted internal alkynes. Kinetic isotope effect experiments suggest the irreversibility of the C−H activation step, the relevance of which to the rate‐limiting step depends on the reaction conditions. Density functional theory calculations indicate that ligand‐to‐ligand hydrogen transfer is the common mechanism of C−H activation.

Site-Selective C-H Alkenylation of N-Heteroarenes by Ligand-Directed Co/Al and Co/Mg Cooperative Catalysis.

We report herein the design and development of Co/Al and Co/Mg bimetallic catalysts, supported by a phosphine/secondary phosphine oxide (PSPO) bifunctional ligand, for the site-selective C-H alkenylation of nitrogen-containing heteroarenes with alkynes. These catalysts enable the alkenylation of pyridine, pyridone, and imidazo[1,2-a]pyridine derivatives at the C-H site proximal to the Lewis basic nitrogen or oxygen atom, which represents a selectivity profile distinct from that of the previously developed cobalt-diphosphine/aluminum catalyst. The alkenylated products were obtained in moderate to good yields using various heterocycles and differently substituted internal alkynes. Kinetic isotope effect experiments suggest the irreversibility of the C-H activation step, the relevance of which to the rate-limiting step depends on the reaction conditions. Density functional theory calculations indicate that ligand-to-ligand hydrogen transfer is the common mechanism of C-H activation.

Hydrogen Bonding-Assisted and Nonheme Manganese-Catalyzed Remote Hydroxylation of C-H Bonds in Nitrogen-Containing Molecules.

The development of catalytic systems capable of oxygenating unactivated C-H bonds with excellent site-selectivity and functional group tolerance under mild conditions remains a challenge. Inspired by the secondary coordination sphere (SCS) hydrogen bonding in metallooxygenases, reported herein is an SCS solvent hydrogen bonding strategy that employs 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) as a strong hydrogen bond donor solvent to enable remote C-H hydroxylation in the presence of basic aza-heteroaromatic rings with a low loading of a readily available and inexpensive manganese complex as a catalyst and hydrogen peroxide as a terminal oxidant. We demonstrate that this strategy represents a promising compliment to the current state-of-the-art protection approaches that rely on precomplexation with strong Lewis and/or Brønsted acids. Mechanistic studies with experimental and theoretical approaches reveal the existence of a strong hydrogen bonding between the nitrogen-containing substrate and HFIP, which prevents the catalyst deactivation by nitrogen binding and deactivates the basic nitrogen atom toward oxygen atom transfer and the α-C-H bonds adjacent to the nitrogen center toward H-atom abstraction. Moreover, the hydrogen bonding exerted by HFIP has also been demonstrated not only to facilitate the O-O bond heterolytic cleavage of a putative MnIII-OOH precursor to generate MnV(O)(OC(O)CH2Br) as an active oxidant but also to affect the stability and the activity of MnV(O)(OC(O)CH2Br).

3,11-Diaminodibenzo[a,j]phenazine: Synthesis, Properties, and Applications to Tröger's Base-Forming Ladder Polymerization.

A new class of diamino-substituted π-extended phenazine compound was synthesized, and its photophysical properties were investigated. The U-shaped diaminophenazine displayed photoluminescence in solution with moderate quantum yield. The diamino aromatic compound was found applicable to the poly-condensation with formaldehyde to form Tröger's base ladder polymer. The obtained microporous ladder polymer features high CO2 adsorption selectivity against N2 , most likely due to the presence of basic nitrogen atoms in the phenazine rings.

Impact of the Substitution Pattern at the Basic Center and Geometry of the Amine Fragment on 5-HT6 and D3R Affinity in the 1H-Pyrrolo[3,2-c]quinoline Series.

Salt bridge (SB, double-charge-assisted hydrogen bonds) formation is one of the strongest molecular non-covalent interactions in biological systems, including ligand-receptor complexes. In the case of G-protein-coupled receptors, such an interaction is formed by the conserved aspartic acid (D3.32) residue and the basic moiety of the aminergic ligand. This study aims to determine the influence of the substitution pattern at the basic nitrogen atom and the geometry of the amine moiety at position 4 of 1H-pyrrolo[3,2-c]quinoline on the quality of the salt bridge formed in the 5-HT6 receptor and D3 receptor. To reach this goal, we synthetized and biologically evaluated a new series of 1H-pyrrolo[3,2-c]quinoline derivatives modified with various amines. The selected compounds displayed a significantly higher 5-HT6R affinity and more potent 5-HT6R antagonist properties when compared with the previously identified compound PZ-1643, a dual-acting 5-HT6R/D3R antagonist; nevertheless, the proposed modifications did not improve the activity at D3R. As demonstrated by the in silico experiments, including molecular dynamics simulations, the applied structural modifications were highly beneficial for the formation and quality of the SB formation at the 5-HT6R binding site; however, they are unfavorable for such interactions at D3R.

In-situ growth of zeolitic imidazolate framework-8 on polypyrrole nanotubes for highly efficient and reversible capture of radioiodine

Effective capture of radioiodine derived from nuclear reactor accidents and spent fuel reprocessing is of critical significance for the sustainable development of nuclear energy. Herein, we reported the successful synthesis of core-shell PPyNT@ZIF-8 (PZ) nanocomposites with ZIF-8 nanocrystals decorating polypyrrole nanotubes (PPyNT) through a facile, self-assembly procedure. Taking advantage of abundant electron-rich nitrogen atoms of polypyrrole skeleton as well as the high specific surface areas and porosities, these PZ nanocomposites had potential application in radioiodine capture. The maximum uptake capacity of as-synthesized PZ nanocomposites for vapor iodine reached up to 603.8 wt% within 5 h. Additionally, PZ nanocomposites exhibited excellent recycle abilities, as the uptake capacity of PZ-3 still remained 381.7 wt% (63.2% of the initial capacity) after five capture-release cycles. In iodine/cyclohexane solution, the maximum iodine adsorption capacity was 837.9 mg g-1 and all of the loaded iodine could be effectively released in ethanol solution. The excellent iodine capture performance was primarily attributed to the strong affinity between the Lewis acidic iodine molecules and the Lewis basic nitrogen atoms to form polyiodide ions. Considering their excellent iodine adsorption capacity and superior stability, PZ nanocomposites could be employed to effectively eliminate radioactive iodine.