Barbier-type Conditions Research Articles

Facile synthesis of homoallylamines via α-regioselectivity in ultrasonic mediation and γ-adduct syn-stereoselective allylation with AlCl3-catalysis

The allylation reaction of aldimines with allyl metal reagents is an important synthetic method for the preparation of homoallylamines. Therefore, we wish to report a highly regioselective and stereoselective allylation reaction under sonochemical Barbier-type reaction conditions. The high yields of regioselective α-adducts were achieved by reacting cinnamyl bromide, zinc, 1,2-dibromoethane, and aldimine in THF under sonochemical Barbier-type conditions. Highly regioselective and stereoselective allylation reactions were also achieved under Lewis acid-promoted Barbier-type reaction conditions.

Barbier-type anti-Diastereo- and Enantioselective Synthesis of \u03b2-Trimethylsilyl, Fluorinated Methyl, Phenylthio Homoallylic Alcohols

Catalytic Asymmetric allylation of aldehydes with functionalized allylic reagents represents an important process in synthetic organic chemistry because the resulting chiral homoallylic alcohols are valuable building blocks in diverse research fields. Despite the obvious advantages of allyl halides as allylation reagent under Barbier-type conditions, catalytic asymmetric version using functionalized allyl halides remains largely underdeveloped. Here, we addressed this issue by employing a chromium-catalysis system. The use of readily available allyl bromides with γ substitutions including trimethylsilyl, fluorinated methyl and phenylthio groups provided an efficient and convenient method to introduce those privileged functionalities into homoallylic alcohols. Good yields, high anti-diastereo- and excellent enantioselectivities were achieved under mild reaction conditions.

Zinc-mediated α-regioselective Barbier-type cinnamylation reactions of aldehydes, ketones and esters.

We report a simple, efficient, and general method for the zinc-mediated regioselective cinnamylation of aldehydes and ketones under Barbier-type conditions in a one-pot synthesis affording the corresponding α-cinnamylated alcohols in moderate to excellent yields. Compared to the literature procedures, this approach is operationally simple, uses simple reactants, and provides direct access to linear α-cinnamylated alcohols with excellent regioselectivity. Experimental results suggest that the reactions proceed through the radical pathway. In addition, the reaction was found to be scalable to the gram-scale and the one-pot protocol is also applicable to less reactive esters leading to bishomoallylic alcohols which were valuable intermediates for desymmetrizing intramolecular Heck cyclization, allowing for the elaboration to functionalized building blocks.

Chloromethyllithium

Chloromethyllithium (LiCH2Cl) is a synthetically useful reagent belonging to the category of carbenoids, which are known to exhibit an ambiphilic behavior ranging from nucleophilic (at low temperatures) to electrophilic (at higher temperatures). This fact can be deduced by the resonance structures represented in Scheme [1], in which the extreme ionization of the polar bonds could lead, in principle, to the carbanionic (1a) or carbocationic (1b) species.[1] Chloromethyllithium can be prepared via a halogen–lithium exchange reaction on a given dihalomethane. Iodo- and bromo-chloromethane (ICH2Cl and BrCH2Cl) are the ideal precursors jointly with methyllithium–lithium bromide complex or n-butyllithium.[2] It is highly unstable except at very low temperatures (–78 °C or below); however, performing the reaction in the presence of the electrophile (i.e. Barbier-type conditions) allows to realize efficient processes. The presence of lithium halides and the use of ethereal-type solvents (THF or diethyl ether) had beneficial effects on its stability.[3]

SnCl2·2H2O-mediated Barbier-type allylation: A comparative evaluation of the catalytic performance of CuI and Pd(OAc)2

Abstract A systematic investigation has been carried out for the allylation of carbonyl compounds under SnCl 2 ·2H 2 O-mediated Barbier-type conditions, using CuI and Pd(OAc) 2 as catalysts. Ketones, which are not reactive under the influence of CuI, however, could be activated by using Pd(OAc) 2 as a catalyst.

Direct Synthesis of B-Allyl and B-Allenyldiisopinocampheylborane Reagents Using Allyl or Propargyl Halides and Indium Metal Under Barbier-Type Conditions

We report the first one-pot process for the asymmetric addition of allyl, methallyl, and propargyl groups to aldehydes and ketones using B-chlorodiisopinocampheylborane ((d)DIP-Cl) and indium metal. Under Barbier-type conditions, indium metal was used to generate allyl- and allenylindium intermediates, and subsequent reaction with (d)DIP-Cl successfully promoted the transfer of these groups to boron forming the corresponding chiral borane reagents. The newly formed borane reagents were reacted with aldehydes and ketones to produce the corresponding alcohol products in high yields and up to excellent enantioselectivity (98% ee). This method produced excellent enantioenriched secondary homoallylic alcohols from the allylation and methallylation of benzaldehyde. Using this method, the methallylation and cinnamylation of ketones afforded the highest enantioselectivities, while the propargylation of both aldehydes and ketones provided low enantiomeric excesses. In addition, this procedure provided the first synthesis of B-allenyldiisopinocampheylborane, which was characterized by (1)H and (11)B NMR spectroscopy. This is the first example of the direct synthesis of allylboranes that contained substitutions from the corresponding allyl bromide and indium, thereby expanding the utility of the DIP-Cl reagent. Hence, a general and straightforward route to these chiral organoborane reagents in one-pot has been developed along with the asymmetric Barbier-type allylation and propargylation of aldehyde and ketone substrates using these chiral organoborane reagents in subsequent coupling reactions.

Indium-Mediated Asymmetric Barbier-Type Propargylations: Additions to Aldehydes and Ketones and Mechanistic Investigation of the Organoindium Reagents

We report a simple, efficient, and general method for the indium-mediated enantioselective propargylation of aromatic and aliphatic aldehydes under Barbier-type conditions in a one-pot synthesis affording the corresponding chiral alcohol products in very good yield (up to 90%) and enantiomeric excess (up to 95%). The extension of this methodology to ketones demonstrated the need for electrophilic ketones more reactive than acetophenone as the reaction would not proceed with just acetophenone. Using the Lewis acid indium triflate [In(OTf)(3)] induced regioselective formation of the corresponding homoallenic alcohol product from acetophenone. However, this methodology demonstrated excellent chemoselectivity in formation of only the corresponding secondary homopropargylic alcohol product in the presence of a ketone functionality. Investigation of the organoindium intermediates under our reaction conditions shows the formation of allenylindium species, and we suggest that these species contain an indium(III) center. In addition, we have observed the presence of a shiny, indium(0) nugget throughout the reaction, irrespective of the stoichiometry, indicating disproportionation of indium halide byproduct formed during the reaction.

ChemInform Abstract: Barbier-Type Reactions of Nitriles and Alkyl Iodides Mediated by Samarium(II) Iodide in the Presence of Catalytic Nickel(II) Iodide.

Abstract The samarium(II) iodide-mediated intermolecular Barbier-type reactions of nitriles and alkyl iodides have been investigated. In the presence of a catalytic amount of nickel(II) iodide, the reaction proceeded smoothly to provide the corresponding ketones. Amides also reacted to give ketones under the same Barbier-type conditions.

ChemInform Abstract: Diastereoselective Allylation of Aldehydes with an Enantiopure 2-Sulfinylallyl Halide under Environmentally Friendly Barbier-Type Conditions.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.

Indium-Mediated Asymmetric Barbier-Type Allylations: Additions to Aldehydes and Ketones and Mechanistic Investigation of the Organoindium Reagents

We report a simple, efficient, and general method for the indium-mediated enantioselective allylation of aromatic and aliphatic aldehydes and ketones under Barbier-type conditions in a one-pot synthesis affording the corresponding chiral alcohol products in very good yield (up to 99%) and enantiomeric excess (up to 93%). Our method is able to tolerate various functional groups, such as esters, nitriles, and phenols. Additionally, more substituted allyl bromides, such as crotyl and cinnamyl bromide, can be used providing moderate enantioselectivity (72% and 56%, respectively) and excellent diastereoselectivity when employing cinnamyl bromide (>95/5 anti/syn). However, the distereoselectivity when using crotyl bromide was poor and other functionalized allyl bromides under our method afforded low enantioselectivities for the alcohol products. In these types of indium-mediated additions, solvent plays a major role in determining the nature of the organoindium intermediate and we observed the susceptibility of some allylindium intermediates to hydrolysis in protic solvents. Under our reaction conditions using a polar aprotic solvent, we suggest that an allylindium(III) species is the active allylating intermediate. In addition, we have observed the presence of a shiny, indium(0) nugget throughout the reaction, irrespective of the stoichiometry, indicating disproportionation of indium halide byproduct formed during the reaction.

A practical preparation of aryl β-ketophosphonates

The condensation of alkyl phosphonates with aryl esters to give β-ketophosphonates may be carried out at elevated temperatures mediated by LiHMDS under Barbier type conditions. The reaction is scalable, does not require specialized cryogenic equipment, and is general for all aryl and heteroaryl esters examined.

A Facile Synthesis of N-Sulfonyl and N-Sulfinyl Aldimines under Barbier-Type Conditions

A convenient synthesis of N-sulfonyl- and N-sulfinylimines by the condensation of aldehydes with sulfonyl or sulfinyl amides in the presence of benzyl bromide and zinc dust at room temperature under the Barbier-type conditions is reported. The procedure is lauded by its simplicity and adaptability to aromatic, alpha,beta-unsaturated, and aliphatic aldehydes.

Asymmetric indium-mediated Barbier-type allylation reactions with ketones to form homoallylic alcohol products

We report a general method for the enantioselective allylation of both aromatic and aliphatic ketones under indium-mediated Barbier-type conditions. Using 2 equiv of a commercially available amino alcohol, either (1 S,2 R)-(+)-2-amino-1,2-diphenylethanol ((+)- 1) or (1 R,2 S)-(−)-2-amino-1,2-diphenylethanol ((−)- 1) as the chiral auxiliary, good yields and enantioselectivities were achieved. To our knowledge, the enantioselectivities reported herein are the highest obtained for the indium-mediated allylations of ketones, specifically the homoallylic alcohol product obtained from the addition to α,α,α-trifluoroacetophenone provided 80% enantiomeric excess.

Synthesis of 2‐Methylidene‐1‐silacyclohexanes from 2,6‐Dibromohex‐1‐ene and Polyhalosilanes.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

Synthesis of 2-methylidene-1-silacyclohexanes from 2,6-dibromohex-1-ene and polyhalosilanes

Various 2-methylidene-1-silacyclohexanes were prepared by straightforward syntheses from readily available polychloro- or polyfluorosilanes, magnesium and 2,6-dibromohex-1-ene using Barbier-type conditions or a previously synthesized Grignard reagent. Good yields were obtained considering the low stability of the products in the reaction conditions.

Metal‐Mediated Entry to Functionalized 3‐Substituted 3‐Hydroxyindolin‐2‐ones via Regiocontrolled Carbonylallylation, Bromoallylation, 1,3‐Butadien‐2‐ylation, Propargylation, or Allenylation Reactions of Isatins in Aqueous Media.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Novel Carbonyl Bromoallylation/Heck Reaction Sequence. Stereocontrolled Access to Bicyclic β‐Lactams.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Samarium Diiodide Promoted Generation and Asymmetric Hydroxyalkylation of N,O‐Diprotected (3S)‐3‐Pyrrolidinol 2‐Carbanions.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Metal-Mediated Entry to Functionalized 3-Substituted 3-Hydroxyindolin-2-ones via Regiocontrolled Carbonylallylation, Bromoallylation, 1,3-Butadien-2-ylation, Propargylation, or Allenylation Reactions of Isatins in Aqueous Media

Reactions of 2,3-indolinediones (isatins) with stabilized organometallic reagents were investigated in aqueous media. Isatins and a variety of stabilized organic halides undergo coupling under Barbier-type conditions in the presence of different metals (indium, tin, zinc) and additives (ammonium chloride, hydrobromic acid, bismuth(III) chloride, hafnium(IV) chloride). The regiochemistry of the processes (carbonylallylation, bromoallylation, 1,3-butadien-2-ylation, propargylation, or allenylation reactions) were generally excellent. On this basis, simple and fast protocols for the synthesis of the potentially bioactive 3-substituted 3-hydroxyoxindole moiety were developed.

Novel Carbonyl Bromoallylation/Heck Reaction Sequence. Stereocontrolled Access to Bicyclic β-Lactams

[reaction: see text] The reaction of 2,3-dibromopropene with racemic as well as enantiopure 4-oxoazetidine-2-carbaldehydes 1 in aqueous media was promoted by tin in the presence of several additives to afford the corresponding bromohomoallyl alcohols 2 in high diastereoselectivities. However, indium or zinc were unable to promote the bromoallylation reaction of aldehydes 1 under similar Barbier-type conditions. Vinyl bromides 2 bearing an extra alkene tether were used for the preparation of differently sized, fused bicyclic beta-lactams of nonconventional structure via Heck cyclization.