Balanced Cross Sections Research Articles

Structural evolution of the Handun salt diapir, Zagros fold and thrust belt, southern Iran

The Fars region, in the Zagros fold and thrust belt, hosts a wide range of diapirs piercing over 10 km of stratigraphic sequence. Comprising Precambrian to Early-Cambrian Hormuz Salt, these diapirs exhibit a prolonged history of evolution. Outcrop evidence for understanding the diapir deformation history is mostly limited to the Cenozoic contractive phase, and the seismic data lacks the necessary quality for an exhaustive understanding of the deepest structure's geometries. Through regional and field evidence we unravel the Handun salt structure evolution and propose a sequential restoration to describe the key deformational events. Our study presents a field-based novel regional balanced cross-section and a 3D-geological model, and addresses the role of structural inheritances and the position of the Handun diapir with respect to the decupled basement. The performed field studies describe folds and unconformities related to Cenozoic halokinetic sequences with exceptional clarity. It was possible to observe changes of the diapir activity along the structure and provide field evidence for the relative timing and kinematics of primary and secondary welding. Finally, our data suggest that the Handun diapir formed in the early Paleozoic above the shoulder of a basement extensional fault, and was partially translated above its southern hanging-wall during the shortening. In the Paleocene a sustained ratio of salt rise rate was enhanced by the Zagros/Oman contraction. In response to the Oligocene continental collision, the diapir was profusely supplied with salt, which flared upward to form overhangs. Since the middle Miocene the salt supply slowly depleted, with the diapiric walls remaining near the surface but tapering upward, probably due to primary welding or increased sedimentation. Secondary welding occurred post-Pliocene in the last stages of the diapir evolution with consequent development of a secondary minibasin.

Morphometry and kinematics correlation of wrinkle ridges on Mars: Insights from Trishear modelling

Wrinkle ridges are among the most common and controversial compressional tectonic structures on terrestrial planets. While their origins are well inferred to be related to crustal shortening driven by compressional stress, their subsurface characterization is still a matter of debate. Open questions remain about the geometry, number, structural style and kinematics of faults promoting wrinkle ridges. We use the Trishear and Fault-Parallel-Flow integrated forward kinematic modelling to model wrinkle ridges related faults. This is achieved through a series of balanced cross sections and a consequent set of narrow 3D models. We perform a detail kinematic analysis on nine wrinkle ridges: six are located in the circum-Tharsis regions of Lunae Planum and Solis Planum, while three are located in the Hellas Planitia, Hesperia Planum and Syrtis Major Planum, respectively. The applied methodology allows us to quantitatively assess wrinkle ridges geometry and kinematics, and to correlate them with morphometric parameters (i.e., width and relief). Our results indicate how wrinkle ridges tectonics can be characterized by a more complex array of faults than previously modelled. This leads to a total amount of horizontal shortening accommodated differently depending on the number and type of faults (i.e., main fault, backthrust, synthetic faults). The location and geometry of the modelled faults suggest the presence of multiple detachments at different depths and with different mechanical behaviors such as weaker and more frictional décollements, which are likely found within sedimentary interlayers. The amount of shortening, the fault geometry and spacing, as well as the upper faults tips depth are positively correlated with major morphometric parameters of wrinkle ridges topography.

Structural style & kinematic analysis of deformation in the northern Dezful Embayment, Zagros Fold-Thrust Belt, SW Iran

A comprehensive understanding of structure and kinematic characteristics of fold and thrust belts provides significant information for hydrocarbon exploration and production. The kinematic evolution and structural style of three subsurface oilfields, Zeloi, Lali and Karun, in the northern part of the Dezful Embayment, a significant petroleum province of the Zagros Fold-Thrust Belt in SW Iran, were investigated using 2D seismic data. Interpretation of the 2D seismic profiles with up to 5 km depth consisting of upper Jurassic to Pleistocene sediments and the balanced cross-sections constructed revealed diverse geometries and kinematics along the oilfields. These results demonstrate that the structural style of the oilfields was controlled by the Gachsaran and Dashtak formations as upper and middle detachment levels, respectively. Tear faults affected the along-strike variations in structural style of the oilfields. Based on the analysis of growth strata, folding evolved as limbs rotated and hinges migrated, beginning in the mid-Miocene. During the later stages of deformation, the initial detachment folds transformed into fault-bend folds.

Normal fault localization controls during syn- and post-orogenic extension affecting thin-skinned architecture

Balanced cross sections through thrustbelts affected by post-orogenic extension reveal that normal faults are mostly developed in the backlimbs of pre-existing, asymmetric, fault-propagation and detachment folds. Outcrop study, geological cross section balancing, reflection seismic interpretation and numerical modeling in the Eastern Balkans indicate that the nucleation of these normal faults is affected by the occurrence of plastic strain zones in backlimbs, represented by clusters of small-scale dilatant shear fractures. Thrustbelt segments where these zones did not evolve into thrust faults and became passively rotated into steeper geometries are prone to normal fault development during post-orogenic extension. Instead of developing its own precursor fracture clusters, each normal fault of this type nucleates using pre-existing clusters as a shortcut in its development. Rare occurrences of post-orogenic extension-driven faults, which reactivate entire pre-existing thrust fault ramps or develop in fold forelimbs indicate the existence of other parameters that co-control the development of normal faults in this setting. These parameters include thrustbelt topography as well as variations in décollement geometry and frictional properties.

Tectonic evolution of the eastern margin of the Northern South Yellow Sea Basin in the Yellow Sea since the Late Cretaceous

The South Yellow Sea Basin is the largest sedimentary basin in the Yellow Sea. The Gunsan Basin in the central eastern part of the Northern South Yellow Sea Basin comprises the Western, Central, and Eastern Subbasins. The Eastern Subbasin marks the eastern margin of the South Yellow Sea Basin. Interpretation of multi-channel seismic profiles and balanced cross-section restoration of depth-converted seismic profiles reveal the structural characteristics and evolution of the Eastern Subbasin. The subbasin comprises three groups of faults: NW-SE, NE-SW, and NNE-SSW trending faults. The subsidence pattern of the subbasin, derived from the cross-section restoration analysis, indicates five distinguished evolution phases: (i) rapid subsidence in the Late Cretaceous, (ii) slow subsidence from the Paleocene to the Eocene, (iii) accelerated subsidence in the Oligocene, (iv) alternation of the uplift and subsidence in the Early Miocene, and (v) gradual subsidence since the Middle Miocene. The main and moderate subsidence can be explained by the combination of extension in the SE and NE-SW directions that formed double duplex structures. We suggest that the NW oblique subduction of the Pacific Plate under the NE Asia margin induced both extension toward the trench and dextral strike-slip parallel to the margin. The extension toward the trench caused SE transtension in a local pull-apart setting, whereas the dextral strike-slip parallel to the margin caused NE-SW extension, inducing more significant subsidence. The combined processes resulted in the progressive development of nested duplex structures. The evolution of the Eastern Subbasin is not compatible with previously suggested models for the western part of the South Yellow Sea Basin including foreland basin formation and transtension induced by branch faults of the Tan-Lu Fault.

Integrated geological and geophysical workflow for structural modelling: a case study from the contractional foothills zone of the Colombian Eastern Cordillera

In fold-and-thrust belts where there is a high degree of structural complexity, artificial geometrical distortions are often present on seismic reflection profiles. These need to be minimized during modelling. We document a workflow in which depth mapping, velocity model building, well calibration and cross-section balancing are integrated into the seismic interpretation process to generate trustworthy structural models in complex zones. The proposed methodology is exemplified by a case study from the foothills zone of the Colombian Eastern Cordillera. In addition, sequential kinematic restoration of the modelled structure allowed an evaluation to be made of hydrocarbon migration routes during the period between the Oligocene and the middle Miocene. Following the previously mentioned workflow, we document a failed exploratory case study where all elements of the petroleum system are present except the trap. In this context, the documented case is a typical velocity pull-up. From this and published case studies, we conclude that in Andean settings and probably most on land contractional-foothill settings, the use of seismic images only does not provide enough evidence for the presence of traps and additional surface geological signatures must be documented. The proposed workflow therefore appears to be a useful tool for evaluating the exploration risk in structurally complex fold-and-thrust belt settings.

Paipote fold-and-thrust belt, a key element in understanding the upper crustal shortening mechanisms of the Central Andean forearc

The crustal shortening of the Andean forearc in northern Chile was accommodated by a combination of both thin- and thick-sinned structural styles. However, fold-related inversion of normal faults appears to be the most important structures in the area. To understand the upper crustal shortening mechanisms that acted during the tectonic uplift of this region, an original structural investigation was carried out, integrated with outcrop and regional-scale observations, balanced cross-sections, and pre-shortening restorations of structures exposed along the Paipote fold-and-thrust belt. On this basis, we presented the first balanced cross-section of this region extending for nearly 27 km is presented. The structural styles consisted of east-directed asymmetrical folds involving Paleozoic to Cenozoic strata. The folds were kinematically related to inverted normal faults and thrust ramps that penetrated downward into the basement. The inverted structures resulted from the reverse reactivation of preexisting Upper Paleozoic to Jurassic west-dipping, basement-rooted normal faults that accommodated the tectonic extension that preceeding the Andean orogenesis. The reverse-reactivation of these extensional structures controlled the development of east-verging anticlines, along which the Mesozoic syn-rift strata were elevated above their regional elevation. Other folds exhibit the typical geometry of fold-related thrust ramps (fault–bend folds and fault–propagation folds). These are proposed to result from the development of low-angle thrusts propagating across precursor normal faults with shortcut trajectories, that detach along Jurassic shales, thus forming complex thin-skinned structures in shallow structural levels. The latter is responsible for accommodating a major crustal shortening (nearly 5 km). The east-directed tectonic transport direction was influenced by the original attitude of precursor extensional faults.

Mesozoic to Cenozoic tectonic evolution in the central Bohai Bay Basin, East China

The Mesozoic and Cenozoic tectonic evolutionary history of the East Asian continental margin has been the focus of many researchers because of the overprinting of multiple tectonic domains. Previous studies have suggested that the westward subduction of the Paleo-Pacific Plate and the Pacific Plate resulted in the deconstruction of the North China Craton and controlled the formation of the related basins on the continental margin of East Asia. However, controversy remains regarding the tectonic transition processes and mechanisms that occurred from the Mesozoic to the Cenozoic. Since the Mesozoic, the Bohai Bay Basin on the eastern margin of the North China Craton of East China has been influenced by multiple tectonic domains of the Paleo-Tethys, Paleo-Pacific, and Pacific oceans, and there are complete records of these tectonic transition processes. The Bozhong Depression is a subbasin in the Bohai Bay Basin, which is a crucial area for researching the tectonic evolution of the Bohai Bay Basin throughout the Mesozoic−Cenozoic and the regional tectonic evolution of the eastern continental margin of China. Based on 3-D seismic data, logging core data, and a balanced cross section in the Bozhong area, combined with data from the apatite fission-track inversion model, we reconstructed the tectonic evolutionary history of central Bohai Bay Basin and established a three-cycle and eight-stage tectonic model of the central Bohai Bay Basin during the Mesozoic−Cenozoic. The three cycles are the Indosinian, the Yanshinian, and the Himalayan. (1) The Indosinian was marked by two stages. During the early Indosinian, NW-trending thrust faults were formed due to the collision and northward subduction of the South China Block underneath the North China Block. In the late Indosinian, the tectonic stress in the central Bohai Bay Basin shifted from compression to extension. Consequently, the thrust faults reversed, leading to the deposition of Early−Middle Jurassic strata. (2) The Yanshanian cycle comprises three main phases. Early Yanshanian transpressional shearing led to the formation of a NE/NNE-trending, left-lateral strike-slip fault due to NWW-directed subduction of the Paleo-Pacific Plate. Middle Yanshanian transtensional shearing was driven by Paleo-Pacific Plate rollback and resulted in regional extension and the negative inversion of previous compressive faults. Late Yanshanian compression gave rise to the basin reversion, which resulted from an increased subduction speed of the Paleo-Pacific Plate and a transition from a high angle to a low angle. (3) The Himalayan cycle was marked by three phases. During the early Paleogene, the region was characterized mainly by extension, and NE-trending, right-lateral strike-slip normal faults began to form. This coincided with a decrease in the Pacific Plate’s subduction speed. In the late Paleogene, the subduction rate of the Pacific Plate increased, resulting in the change of the central Bohai Bay Basin from an extensional environment to one marked by regional differential compression. In the Neogene, regional thermal subsidence and depression sedimentation occurred, which were probably induced by the increasing subduction speed and rollback of the Pacific Plate. The Bozhong Depression has experienced multiple stages of tectonic evolution, which indicates the concurrent and superimposed effects and transition of multiple tectonic domains.

Reconstructing the Evolution of Foreland Fold‐And‐Thrust Belts Using U‐Pb Calcite Dating: An Integrated Case‐Study From the Easternmost Jura Mountains (Switzerland)

AbstractThis case‐study from the Jura Mountains in the foreland of the European Alps demonstrates how the coupling of subsurface analysis and U‐Pb carbonate dating can provide absolute timing constraints and shortening rate estimates of fold‐and‐thrust belts. It is confirmed that the initial Late Cenozoic foreland deformation driving the formation of the easternmost Jura Mountains in Switzerland was predominately thin‐skinned with contractional deformation largely restricted to the Mesozoic succession above a sub‐horizontal basal décollement. Thereby, the localization and structural style of related deformation structures was strongly guided by the characteristics of underlying Late Paleozoic half grabens. The main thin‐skinned thrust front formed at ∼12 Ma, followed by further deformation in the hinterland and locally continued foreland‐directed thrust propagation. The major deformation zones exposed at surface were established at ∼8 Ma but shortening continued until at least ∼4 Ma. Thick‐skinned contraction associated with the inversion of basement structures only played a subordinate role during the latest deformation phase after 8 Ma. Based on cumulative shortening values derived from balanced cross sections, our U‐Pb ages of syn‐tectonic calcite slickenfibres allow to estimate thin‐skinned deformation rates for the easternmost Jura Mountains between ∼0.9 and ∼0.1 mm/year, decreasing toward the eastern tip of the arcuate belt. Moreover, deformation rates seemingly decreased over time with rates of initial thin‐skinned thrusting being significantly higher than the later deformation north of the main thrust front. These new findings from a classical foreland setting highlight the potential of integrating U‐Pb dating in regional fold‐and‐thrust belt investigations elsewhere.

TECTONICS AND GEOLOGICAL STRUCTURE OF THE MAYA-KYLLAKH ZONE (SOUTH VERKHOYANSK REGION) OBTAINED FROM BALANCED CROSS-SECTIONS

A technique for balancing cross-sections is used to construct geometrically consistent structural sections through fold-thrust belts. Unlike the predecessor studies, the balanced cross-sections in this study were obtained using the deep seismic sounding and well data and Move Software. Two detailed balanced cross-sections pass through the central part of the South Verkhoyansk region: the 80 km long Yudoma cross-section running along 59°45ʹ N, and the 122 km long Allakh-Yun cross-section within 60°40ʹ – 61°00ʹ N. Both sections are characterized by a thin-skinned structure, "mechanical stratigraphy", emergent leading imbricate fans in the foreland, thick Riphean strata, and eastward dip of the detachment surface. The surface shortening values are ~33 % for the Yudoma cross-section and ~26 % for the Allakh-Yun cross-section, showing an old-to-young-complex decrease from 39 % for the Yudoma cross-section to 19 % for the Allakh-Yun cross-section. On the Yudoma cross-section, the detachment occurs in the Middle Riphean deposits and dips down to 8 km; on the Allah-Yun cross-section, it occurs in the Lower Riphean deposits and dips down to 15 km. The difference in the detachment level may indicate the presence of a ramp between the cross-sections or an inaccurate localization of a ramp between the Central and Kyllakh-Eibeke-Khayata segments. The changes in the geological structure across and along the strike of the orogen are traced; the obtained cross-sections are compared with each other, with other cross-sections across the South and West Verkhoyansk regions, and with the cross-sections through the foreland fold and thrust belts of the Urals, Appalachians, and Cordillera of North America.

Seismic data, cross-section balancing, and hydrocarbon prospectivity of the western Sulaiman fold belt, northwest Pakistan

Over the past few decades, hydrocarbon exploration has considerably improved our understanding of foreland deformation. This study used the interpretation of seismic reflection profiles and cross-section balancing techniques to understand the passive-roof duplex geometry of foreland structures in the Western Sulaiman Fold Belt (SFB), Pakistan. Seismic reflection profiles were interpreted to show the presence of hinterland-vergent fault-propagation and fault-bend folds as prospects over a detachment located at a depth of ∼6 km in the pelitic Triassic succession. Cross-section balancing showed intraplate deformation in the hanging-wall flat of the frontal duplex. Clear seismic reflectors above 3 s two-way travel time (TWT), estimates of stratigraphic and tectonic thicknesses with field geology and isopach mapping were used to locate the décollement in the pelitic Permo-Triassic strata at a depth of ∼11 km and interpret stacked duplexes at the mountain front. The foreland deformation of the western SFB was compared with that of the central/eastern SFB. The comparison shows the presence of discovered gas fields, with intraplate deformation of the duplex in the western, and pop-ups in the roof-sequence in eastern SFB depicting the complexity of deformation for the assessment of hydrocarbon prospectivity in the fold belt. The 33 km deformed balanced cross-section was restored to ∼71 km, with 38 km (54%) shortening in the foreland. Approximately 12 km (17%) of shortening was passively accommodated by the hinterland-vergent out-of-sequence passive backthrust in the frontal horse. This description of foreland deformation using the example of the SFB adds to our understanding of the structures of the mountain front that are recognized as zones of prolific hydrocarbon prospects.

A survey of technologies supporting design of a multimodal interactive robot for military communication

PurposeThis paper presents a survey of research into interactive robotic systems for the purpose of identifying the state of the art capabilities as well as the extant gaps in this emerging field. Communication is multimodal. Multimodality is a representation of many modes chosen from rhetorical aspects for its communication potentials. The author seeks to define the available automation capabilities in communication using multimodalities that will support a proposed Interactive Robot System (IRS) as an AI mounted robotic platform to advance the speed and quality of military operational and tactical decision making.Design/methodology/approachThis review will begin by presenting key developments in the robotic interaction field with the objective of identifying essential technological developments that set conditions for robotic platforms to function autonomously. After surveying the key aspects in Human Robot Interaction (HRI), Unmanned Autonomous System (UAS), visualization, Virtual Environment (VE) and prediction, the paper then proceeds to describe the gaps in the application areas that will require extension and integration to enable the prototyping of the IRS. A brief examination of other work in HRI-related fields concludes with a recapitulation of the IRS challenge that will set conditions for future success.FindingsUsing insights from a balanced cross section of sources from the government, academic, and commercial entities that contribute to HRI a multimodal IRS in military communication is introduced. Multimodal IRS (MIRS) in military communication has yet to be deployed.Research limitations/implicationsMultimodal robotic interface for the MIRS is an interdisciplinary endeavour. This is not realistic that one can comprehend all expert and related knowledge and skills to design and develop such multimodal interactive robotic interface. In this brief preliminary survey, the author has discussed extant AI, robotics, NLP, CV, VDM, and VE applications that is directly related to multimodal interaction. Each mode of this multimodal communication is an active research area. Multimodal human/military robot communication is the ultimate goal of this research.Practical implicationsA multimodal autonomous robot in military communication using speech, images, gestures, VST and VE has yet to be deployed. Autonomous multimodal communication is expected to open wider possibilities for all armed forces. Given the density of the land domain, the army is in a position to exploit the opportunities for human–machine teaming (HMT) exposure. Naval and air forces will adopt platform specific suites for specially selected operators to integrate with and leverage this emerging technology. The possession of a flexible communications means that readily adapts to virtual training will enhance planning and mission rehearsals tremendously.Social implicationsInteraction, perception, cognition and visualization based multimodal communication system is yet missing. Options to communicate, express and convey information in HMT setting with multiple options, suggestions and recommendations will certainly enhance military communication, strength, engagement, security, cognition, perception as well as the ability to act confidently for a successful mission.Originality/valueThe objective is to develop a multimodal autonomous interactive robot for military communications. This survey reports the state of the art, what exists and what is missing, what can be done and possibilities of extension that support the military in maintaining effective communication using multimodalities. There are some separate ongoing progresses, such as in machine-enabled speech, image recognition, tracking, visualizations for situational awareness, and virtual environments. At this time, there is no integrated approach for multimodal human robot interaction that proposes a flexible and agile communication. The report briefly introduces the research proposal about multimodal interactive robot in military communication.

Superimposed Variscan and Alpine deformation in the basement rocks of southern Andorra, central Pyrenees

Detailed mapping, structural analysis and cross-section constructions yield new data on the geometry and chronology of Variscan and Alpine deformations in the central Pyrenees of southern Andorra. The study area is characterized by polyphase deformation and strain partitioning owing to the presence of an efficient décollement level within Silurian black shales. Variscan macrostructures gave rise to a minimum shortening of c. 22% for Cambrian–Ordovician and Upper Ordovician units below the décollement level and of c. 35% for Silurian and Devonian units above it. Variscan structures are cut by out-of-sequence thrusts, presumably developed after late Variscan igneous intrusions, and extensional faulting. These thrusts cut previous Variscan D 2 (main-phase) folds and originate additive and subtractive contacts. We propose an Alpine age for most of these thrusts, which, together with the Variscan structures, are affected by subsequent Alpine deformation, which causes changes in their orientation around the intrusions, and a progressive steepening of the cleavage from south to north. We discuss the usefulness and limitations of balanced cross-sections in polydeformed areas and propose that the technique is valid to construct regional sections and to obtain geologically reasonable pre-deformational configurations.

New paleomagnetic data from the central Tethyan Himalaya refine the size of Greater India during the Campanian

Knowledge of the size of Greater India is critical to deciphering the geodynamic processes of the India-Asia collision, as the size of this landmass primarily determines the amount of continental subduction and crustal shortening. Recently, paleomagnetic data revealed the rapid drift of a Himalayan microcontinent (i.e., the Tibetan Himalaya) during ca. 75–61 Ma, which resulted in a triple-stage India-Asia collision scenario. This scenario implies a relatively small Greater India at 75 Ma (Late Cretaceous), but this hypothesis is only based on one high quality Campanian paleomagnetic pole from the eastern part of the Tethyan Himalaya. Here we report comprehensive petrographic, rock magnetic and paleomagnetic studies on Upper Cretaceous oceanic affinity red beds (CORBs) of the Chuangde Formation from the central part of the Tethyan Himalaya at 83.6°E longitude. These CORBs are characterized by multi-component magnetizations carried dominantly by detrital hematite, which retains a primary remanent magnetization. Accordingly, the high temperature magnetization components (585−690°C) were isolated by high-resolution thermal demagnetization. The new paleomagnetic data provide, after applying an inclination shallowing correction, a Campanian paleopole of 43.3°N/258.3°E, which places the central part of the Tethyan Himalaya at a paleolatitude of 16.7° ± 1.8°S at ca. 75 Ma. Comparison of this paleolatitude with the expected paleolatitude of India, using its apparent polar wander path, shows that the N-S extent of central Greater India was ∼910 km during the middle Campanian. Our paleomagnetic data are in agreement with balanced cross section reconstructions and seismologic interpretations of the India-Asia collision zone and provide additional support for the North India Sea hypothesis. The improved estimate of the size of Greater India has several implications for Indian continental crust behavior and results in an updated reconstruction of the India-Asia collision system in the Campanian.

Oligocene to Pliocene structural evolution of the frontal Kirthar fold and thrust belt of Pakistan

The spatio-temporal evolution for the frontal part of the Kirthar fold and thrust belt in Pakistan is constrained for the first-time using apatite (U–Th-Sm)/He (AHe) and apatite fission track (AFT) dating of samples from the Oligocene Nari Formation in combination with a published balanced cross-section. The AHe ages appear to be fully reset, allowing us to date the timing of exhumation above ramps. Comparison of partially reset AFT ages (∼22–24 Ma) with previously published zircon fission track (ZFT) ages of the Nari Formation from nearby areas suggest that rocks in the frontal zone were not buried deeper than ∼4 km after deposition. The close range of AFT ages have implications for the timing of hinterland exhumation and Oligocene age of the Nari Formation. The AHe ages suggest that deformation along the major basement ramp was active since ∼7 Ma, forming a major topographic step (∼1.5 km) in the frontal part of the Kirthar fold and thrust belt. Combined analysis of the structural cross-section and thermal modeling of the samples suggest that major cooling occurred between ∼7 Ma and ∼5 Ma. This cooling was due to the erosion of Oligocene to Miocene strata from above the samples when Precambrian to Miocene strata was thrust above the pre-existing normal fault that acted as a basement ramp. The temporal structural evolution suggests that deformation in the frontal part of the Kirthar fold and thrust belt was characterized by faster rates (∼2.5 km/Ma) of orogenic growth and exhumation between ∼7 and 5 Ma, followed by slower shortening rates (<1 km/Ma) since ∼5 Ma.

Erosion rate maps highlight spatio-temporal patterns of uplift and quantify sediment export of the Northern Andes

Erosion rates are widely used to assess tectonic uplift and sediment export from mountain ranges. However, the scarcity of erosion rate measurements often hinders detailed tectonic interpretations. Here, we present 25 new cosmogenic nuclide-derived erosion rates from the Northern Andes of Colombia to study spatio-temporal patterns of uplift along the Central and Eastern Cordillera. Specifically, we combine new and published erosion rate data with precipitation-corrected normalized channel steepness measurements to construct high-resolution erosion rate maps. We find that erosion rates in the southern Central Cordillera are relatively uniform and average ∼0.3 mm/a. In the northern Central Cordillera rapidly eroding canyons dissect slowly eroding, low-relief surfaces uplifting since 8.3−2.6+3.7 Ma, based on a block uplift model. We interpret that persistent steep slab subduction has led to an erosional steady-state in the southern Central Cordillera, whereas in the northern Central Cordillera, Late Miocene slab flattening caused an acceleration in uplift, to which the landscape has not yet equilibrated. The Eastern Cordillera also displays pronounced erosional disequilibrium, with a slowly eroding central plateau rimmed by faster eroding western and eastern flanks. Our maps suggest Late Miocene topographic growth of the Eastern Cordillera, with deformation focused along the eastern flank, which is also supported by balanced cross-sections and thermochronologic data. Spatial gradients in predicted erosion rates along the eastern flank of the Eastern Cordillera suggest transient basin-ward migration of thrusts. Finally, sediment fluxes based on our erosion maps, suggest that the Eastern Cordillera exports nearly four times more sediment than the Central Cordillera. Our analysis shows that accounting for spatial variations in erosion parameters and climate reveals important variations in tectonic forcing that would otherwise be obscured in traditional river profile analyses. Moreover, given relationships between tectonic and topographic evolution, we hypothesize that spatio-temporal variations in slab dip are the primary driver of the dynamic landscape evolution of the Northern Andes, with potentially superposed effects from inherited Mesozoic rift structures.

Assessing drivers of high exhumation magnitudes and young cooling ages in the eastern central Andes, southern Peru (13–18°S)

The potential structural controls on exhumation across the southern Peruvian Andes are not well understood, in part due to limited structural studies that co-locate with thermochronometric datasets. We integrate these two datasets and evaluate the relative contribution that fault geometry, magnitude, and shortening rate have on predicted cooling ages. Here we present a balanced cross-section constructed using new structural observations. This section, combined with existing thermochronometer data and a thermokinematic model, investigates the drivers of high exhumation and young canyon thermochronometric ages along the deeply incised Marcapata canyon in southern Peru. Together, these approaches constrain the timing and magnitude of exhumation in this portion of the southern Peruvian Andes and provide a mechanism for documenting how the internal architecture changes along strike.The balanced cross-section (oriented N30E) covers the Subandean Zone to the northeast, the Marcapata canyon on the eastern flank of the southern Peruvian Andes, and the Altiplano-Eastern Cordillera boundary to the southwest (13–18° S). Exhumation is constrained by four low-temperature thermochronometer systems, including apatite and zircon (U-Th)/He (AHe and ZHe, respectively) and fission-track (AFT and ZFT, respectively). The youngest AHe (∼1–3 Ma), AFT (∼3–7 Ma), ZHe (∼4–7 Ma), and ZFT (∼14–17 Ma) ages are located in the center and valley bottom of the Marcapata canyon. The thermokinematically modeled cross-section produces cooling ages determined by fault geometry and kinematics. Reset ZFT ages require burial of Ordovician rocks in excess of 5.5 km above the original 6.5 km depositional depth. We find that the ZFT and ZHe ages in the Eastern Cordillera are sensitive to the history and magnitude of burial, age and location of uplift, and canyon incision. Canyon incision is required to reproduce the youngest canyon thermochronometric ages while slow shortening rates from ∼10 Ma to Present are required to reproduce interfluve thermochronometric ages. Shortening is accommodated by basement faults that feed slip up through three different décollement levels before reaching the surface. The proposed stacked basement geometry sets the first-order cooling signal seen in modeled ages. We determined that the total shortening in this section from the Subandean Zone to the Altiplano is 147.5 km, similar to shortening estimates in an adjacent thermo-kinematically modeled section in the San Gabán canyon 50 km to the southeast. Both the ZHe and ZFT ages in the Marcapata section (4–5 and 14 Ma) are noticeably younger than cooling ages from the San Gabán section (16 and 29 Ma). The Marcapata section's higher magnitude of exhumation is due to a repetition of basement thrusts that continues to elevate the Eastern Cordillera while active deformation occurs in the Subandean Zone. The youngest thermochronometric ages in all four systems are co-located with the overlapping basement thrust geometry. This basement geometry, kinematic sequence of deformation, and canyon incision co-conspire to produce the young cooling ages observed in the Eastern Cordillera.

Timing and drivers of exhumation and sedimentation in the eastern Peruvian Andes: Insights from thermokinematic modelling

This study assesses the impact of fold-thrust belt driven deformation on the topographic evolution, bedrock exhumation and basin formation in the southeastern Peruvian Andes. We do this through a flexural and thermokinematically modelled balanced cross-section. In addition, published thermochronology samples from low-elevation (river canyons) and high-elevation (interfluves) and Cenozoic sedimentary basin datasets along the balanced cross-section were used to evaluate the age, location, and geometry of fault-driven uplift, as well as potential relationships to the timing of ∼2 km of canyon incision. The integrated structural, thermochronologic, and basin data were used to test the sensitivity of model results to various shortening rates and durations, a range of thermophysical parameters, and different magnitudes and timing of canyon incision. Results indicate that young apatite (U-Th)/He (AHe) canyon samples from ∼2 km in elevation or lower are consistent with river incision occurring between ∼8–2 Ma and are independent of the timing of ramp-driven uplift and accompanying erosion. In contrast, replicating the young AHe canyon samples located at >2.7 km elevation requires ongoing ramp-driven uplift. Replicating older interfluve cooling ages concurrent with young canyon ages necessitates slow shortening rates (0.25–0.6 mm/y) from ∼10 Ma to Present, potentially reflecting a decrease in upper plate compression during slab steepening. The best-fit model that reproduces basin ages and depositional contacts requires a background shortening rate of 3–4 mm/y with a marked decrease in rates to ≤0.5 mm/y at ∼10 Ma. Canyon incision occurred during this period of slow shortening, potentially enhanced by Pliocene climate change.

The control of curved faults on structural trap formation: Tiantai slope belt, Xihu Sag, East China Sea

Mesoscale (tens of kilometers) curved faults are a common fault geometry in plan view. These types of faults are commonly hydrocarbon traps or sand body controlling faults that play a key role in hydrocarbon exploration. However, restricted by the high-resolution requirements for basic research data, studies of mesoscale curved faults are not as sufficient as those of basin boundary curved faults. Based on high-resolution 3D seismic and well data, through structural interpretation, fault activity analysis, and balanced cross-sections, we investigated the structural characteristics of mesoscale curved normal faults in the Tiantai slope belt of the Xihu Sag, East China Sea, and further revealed the controlling effect on structural trap formation. Our results show a significant association between curved fault evolution and structural trap formation. (a) The curved fault evolution process can be divided into the fault segment stage, hard-linked stage, weak activity stage, fault segment stage Ⅱ, and positive inversion stage, resulting in several east-dipping curved faults. The difference in the fault geometry between different typical curved faults is because they experienced different evolution stages. (b) The formation of curved normal faults is controlled by preexisting sag-controlling faults. In the early Cenozoic, the sag-controlling faults underwent oblique extension, forming segments of curved faults; in the Middle Eocene, the regional extension direction changed to be orthogonal to the curved faults, resulting in the hard linking of fault segments, and the curved normal fault zone formed. This process can be summarized as an accommodation model of mesoscale curved faults. (c) Four types of structural traps have been identified in the curved fault zone. The half-anticlinal trap in the footwall was formed in the hard-linked stage (∼32 Ma) according to the tilting fault block model; the half-anticlinal trap in the hanging wall is a transverse anticline that was formed in the fault segment stage Ⅱ (∼23 Ma) due to the differential subsidence of the strata in the hanging wall; and the faulted anticlinal and the anticlinal traps were controlled by the compression of the Longjing movement and formed at approximately 13 Ma.

Understanding the initial upper plate architecture and shortening distribution in subduction-related orogens: Insights from the Central Andean forearc

The Central Andean Forearc (26°S) structure has been debated for decades. Extension, contraction, and strike-slip deformation are commonly proposed mechanisms to explain the main tectonic elements exposed in the Domeyko Cordillera, Salar de Pedernales Basin, and others partially exposed in the Coastal Cordillera and Central Depression. Although pre-Andean tectonic inheritance seems to have influenced the style and mechanisms of mountain uplift in this region, its current architecture and the way it controlled the shortening distribution during orogen evolution are highly speculative, mainly because some of the tectonic provinces in this segment consist of covered areas (e.g., the Central Depression). To address this question, we present the first balanced cross-section and pre-shortening restoration of the Andean forearc at 26°S. We integrated new field data from the Coastal and Domeyko cordilleras with well data and re-interpreted 2D seismic profiles from the Salar de Pedernales Basin to construct a regional-scale cross-section of 210 km length from the Coastal Cordillera to the current Volcanic Arc, thus showing a two-dimensional (2D tectonic model to help understand the tectonic evolution of the western Central Andes. The results indicate a pre-shortening architecture dominated by Late Permian–Jurassic half-graben structures related to continental rifting. West- and east-dipping basement-rooted normal faults controlled rift-related basins, along which kilometric-scale marine and continental syn-rift sequences accumulated. During early Andean orogenesis, the normal faults were partially inverted, and large anticlines developed at the hanging wall faults, which Upper Cretaceous progressively covered to Paleocene synorogenic units. This suggests that the initial topographic relief in the region resulted from a basin inversion. During the more advanced stages of orogenesis (mid-Cenozoic), new reverse and thrust faults (or shortcut faults) were created, which connected upward with incompetent stratigraphic units and facilitated the propagation of localized fold-and-thrust belts in the eastern Domeyko Cordillera and Salar de Pedernales basins. A minimum of 16.3 km of W-E shortening was reported; however, nearly 11 km was accommodated by the newly created thrusts, indicating that these were most relevant to mountain building.