Bacterial Signal Peptidase Research Articles

New Perspectives on Escherichia coli Signal Peptidase I Substrate Specificity: Investigating Why the TasA Cleavage Site Is Incompatible with LepB Cleavage.

Escherichia coli signal peptidase I (LepB) has been shown to inefficiently cleave secreted proteins with aromatic amino acids at the second position after the signal peptidase cleavage site (P2'). The Bacillus subtilis exported protein TasA contains a phenylalanine at P2', which in B. subtilis is cleaved by a dedicated archaeal-organism-like signal peptidase, SipW. We have previously shown that when the TasA signal peptide is fused to maltose binding protein (MBP) up to the P2' position, the TasA-MBP fusion protein is cleaved very inefficiently by LepB. However, the precise reason why the TasA signal peptide hinders cleavage by LepB is not known. In this study, a set of 11 peptides were designed to mimic the inefficiently cleaved secreted proteins, wild-type TasA and TasA-MBP fusions, to determine whether the peptides interact with and inhibit the function of LepB. The binding affinity and inhibitory potential of the peptides against LepB were assessed by surface plasmon resonance (SPR) and a LepB enzyme activity assay. Molecular modeling of the interaction between TasA signal peptide and LepB indicated that the tryptophan residue at P2 (two amino acids before the cleavage site) inhibited the active site serine-90 residue on LepB from accessing the cleavage site. Replacing the P2 tryptophan with alanine (W26A) allowed for more efficient processing of the signal peptide when the TasA-MBP fusion was expressed in E. coli. The importance of this residue to inhibit signal peptide cleavage and the potential to design LepB inhibitors based on the TasA signal peptide are discussed. IMPORTANCE Signal peptidase I is an important drug target, and understanding its substrate is critically important to develop new bacterium-specific drugs. To that end, we have a unique signal peptide that we have shown is refractory to processing by LepB, the essential signal peptidase I in E. coli, but previously has been shown to be processed by a more human-like signal peptidase found in some bacteria. In this study, we demonstrate how the signal peptide can bind but is unable to be processed by LepB, using a variety of methods. This can inform the field on how to better design drugs that can target LepB and understand the differences between bacterial and human-like signal peptidases.

Carrier Protein-Free Enzymatic Biaryl Coupling in Arylomycin A2 Assembly and Structure of the Cytochrome P450 AryC.

The arylomycin antibiotics are potent inhibitors of bacterial type I signal peptidase. These lipohexapeptides contain a biaryl structural motif reminiscent of glycopeptide antibiotics. We herein describe the functional and structural evaluation of AryC, the cytochrome P450 performing biaryl coupling in biosynthetic arylomycin assembly. Unlike its enzymatic counterparts in glycopeptide biosynthesis, AryC converts free substrates without the requirement of any protein interaction partner, likely enabled by a strongly hydrophobic cavity at the surface of AryC pointing to the substrate tunnel. This activity enables chemo‐enzymatic assembly of arylomycin A2 that combines the advantages of liquid‐ and solid‐phase peptide synthesis with late‐stage enzymatic cross‐coupling. The reactivity of AryC is unprecedented in cytochrome P450‐mediated biaryl construction in non‐ribosomal peptides, in which peptidyl carrier protein (PCP)‐tethering so far was shown crucial both in vivo and in vitro.

Subcellular Localization of Signal Peptide Fusion Proteins Expressed in E. coli

For expression of some proteins in Escherichia coli, export to the periplasmic space is preferred over conventional expression in the cytosol. Export can be accomplished by fusing the coding sequence to DNA encoding a signal peptide (e.g., using pET-22b), which is cleaved by the bacterial signal peptidase as the protein is exported into the space between the inner and outer membranes of E. coli This protocol uses osmotic shock to release polypeptides from the periplasm. Although not quantitative, it should provide preliminary information on the cellular location of signal peptide fusion proteins.

Bacterial Signal Peptidases.

Signal peptidases are the membrane bound enzymes that cleave off the amino-terminal signal peptide from secretory preproteins . There are two types of bacterial signal peptidases . Type I signal peptidase utilizes a serine/lysine catalytic dyad mechanism and is the major signal peptidase in most bacteria. Type II signal peptidase is an aspartic protease specific for prolipoproteins. This chapter will review what is known about the structure, function and mechanism of these unique enzymes.

Probing substrate recognition of bacterial lipoprotein signal peptidase using FRET reporters.

Lipoprotein signal peptidase (Lsp) is a transmembrane aspartic acid protease with a pivotal role in the bacterial lipoprotein maturation pathway. Despite the universal use of Lsp across the Bacterial Kingdom and its potential as an antibiotic target, the substrate recognition patterns of Lsp are poorly understood. Here, we investigated the substrate recognition and biochemical properties of Lsp from Gram- (Escherichia coli) and Gram+ (Streptococcus pyogenes) bacteria, using synthetic peptide-based FRET reporters. Didecanoyl glycerol was found to be an optimal lipid length, and Lsp demonstrated exclusive enantio-selectivity for the (R)-form of the diacylglycerol. Our study will facilitate the iterative optimization of in vitro Lsp assays, as well as provide the first chemical interrogation into the substrate scope of Lsp.

Optimization of a β-Lactam Scaffold for Antibacterial Activity via the Inhibition of Bacterial Type I Signal Peptidase.

β-Lactam antibiotics, one of the most important class of human therapeutics, act via the inhibition of penicillin-binding proteins (PBPs). The unparalleled success in their development has inspired efforts to develop them as inhibitors of other targets. Bacterial type I signal peptidase is evolutionarily related to the PBPs, but the stereochemistry of its substrates and its catalytic mechanism suggest that β-lactams with the 5S stereochemistry, as opposed to the 5R stereochemistry of the traditional β-lactams, would be required for inhibition. We report the synthesis and evaluation of a variety of 5S penem derivatives and identify several with promising activity against both a Gram-positive and a Gram-negative bacterial pathogen. To our knowledge these are the first 5S β-lactams to possess significant antibacterial activity and the first β-lactams imparted with antibacterial activity via optimization of the inhibition of a target other than a PBP. Along with the privileged status of their scaffold and the promise of bacterial signal peptidase I (SPase) as a target, this activity makes these compounds promising leads for development as novel therapeutics.

Stringency of bacterial prolipoprotein signal peptidase (LspA) in recognition of signal peptides – Structure-function correlation

Bacterial lipid modification of proteins is an essential post-translational event committed by Phosphatidylglycerol: prolipoprotein diacylglyceryl transferase (Lgt) by catalysing diacyglyceryl transfer from Phosphatidylglycerol to cysteine present in the characteristic ‘lipobox’ ([LVI] (−3) [ASTVI] (−2) [GAS] (−1) C (+1)) of prolipoprotein signal peptides. This is then followed by the cleavage of the signal peptide by lipoprotein-specific signal peptidase (LspA). It had been known for long that threonine at the −1 position allows diacylglyceryl modification by Lgt, but not signal peptide cleavage by LspA. We have addressed this unexplained stringency by computational analysis of the recently published 3D structure of LspA with its competitive inhibitor as well as transition state analogue, globomycin using PyMoL viewing tool and VADAR (Volume, Area, Dihedral Angle Reporter) web server. The propensity to form hydrogen bond (2.9a) between the hydroxyl group of threonine (not possible with serine) and the NH of the lipid-modified cysteine, possible only in the transition state, will prevent the protonation of NH of the leaving peptide and therefore its cleavage. This knowledge could be useful for designing inhibitors of this essential pathway in bacteria or for engineering LspA.

Not just an antibiotic target: Exploring the role of type I signal peptidase in bacterial virulence

The looming antibiotic crisis has prompted the development of new strategies towards fighting infection. Traditional antibiotics target bacterial processes essential for viability, whereas proposed antivirulence approaches rely on the inhibition of factors that are required only for the initiation and propagation of infection within a host. Although antivirulence compounds have yet to prove their efficacy in the clinic, bacterial signal peptidase I (SPase) represents an attractive target in that SPase inhibitors exhibit broad-spectrum antibiotic activity, but even at sub-MIC doses also impair the secretion of essential virulence factors. The potential consequences of SPase inhibition on bacterial virulence have not been thoroughly examined, and are explored within this review. In addition, we review growing evidence that SPase has relevant biological functions outside of mediating secretion, and discuss how the inhibition of these functions may be clinically significant.

Peptide binding to a bacterial signal peptidase visualized by peptide tethering and carrier-driven crystallization.

Bacterial type I signal peptidases (SPases) are membrane-anchored serine proteases that process the signal peptides of proteins exported via the Sec and Tat secretion systems. Despite their crucial importance for bacterial virulence and their attractiveness as drug targets, only one such enzyme, LepB from Escherichia coli, has been structurally characterized, and the transient nature of peptide binding has stymied attempts to directly visualize SPase-substrate complexes. Here, the crystal structure of SpsB, the type I signal peptidase from the Gram-positive pathogen Staphylococcus aureus, is reported, and a peptide-tethering strategy that exploits the use of carrier-driven crystallization is described. This enabled the determination of the crystal structures of three SpsB-peptide complexes, both with cleavable substrates and with an inhibitory peptide. SpsB-peptide interactions in these complexes are almost exclusively limited to the canonical signal-peptide motif Ala-X-Ala, for which clear specificity pockets are found. Minimal contacts are made outside this core, with the variable side chains of the peptides accommodated in shallow grooves or exposed faces. These results illustrate how high fidelity is retained despite broad sequence diversity, in a process that is vital for cell survival.

The inhibition of type I bacterial signal peptidase: Biological consequences and therapeutic potential.

The general secretory pathway has long been regarded as a potential antibiotic drug target. In particular, bacterial type I signal peptidase (SPase) is emerging as a strong candidate for therapeutic use. In this review, we focus on the information gained from the use of SPase inhibitors as probes of prokaryote biology. A thorough understanding of the consequences of SPase inhibition and the mechanisms of resistance that arise are essential to the success of SPase as an antibiotic target. In addition to the role of SPase in processing secreted proteins, the use of SPase inhibitors has elucidated a previously unknown function for SPase in regulating cleavage events of membrane proteins.

Structure and activity of Streptococcus pyogenes SipA: a signal peptidase-like protein essential for pilus polymerisation.

The pili expressed on the surface of the human pathogen Streptococcus pyogenes play an important role in host cell attachment, colonisation and pathogenesis. These pili are built from two or three components, an adhesin subunit at the tip, a major pilin that forms a polymeric shaft, and a basal pilin that is attached to the cell wall. Assembly is carried out by specific sortase (cysteine transpeptidase) enzyme. These components are encoded in a small gene cluster within the S. pyogenes genome, often together with another protein, SipA, whose function is unknown. We show through functional assays, carried out by expressing the S. pyogenes pilus components in Lactococcus lactis, SipA from the clinically important M1T1 strain is essential for pilus assembly, and that SipA function is likely to be conserved in all S. pyogenes. From the crystal structure of SipA we confirm that SipA belongs to the family of bacterial signal peptidases (SPases), which process the signal-peptides of secreted proteins. In contrast to a previous arm-swapped SipA dimer, this present structure shows that its principal domain closely resembles the catalytic domain of SPases and has a very similar peptide-binding cleft, but it lacks the catalytic Ser and Lys residues characteristic of SPases. In SipA these are replaced by Asp and Gly residues, which play no part in activity. We propose that SipA functions by binding a key component at the bacterial cell surface, in a conformation that facilitates pilus assembly.

Isolation of potential new SPase inhibitors producing strains by soft agar overlay assay method.

The arylomycins are a class of compounds that target bacterial signal peptidases (SPases). In an effort to discover new compounds in this class and other small molecule SPase inhibitors, a rapid screening method was developed and applied to bacteria cultured from marine sediment samples. The assay consisted of a soft agar overlay using an engineered E. coli strain MG1655 ΔlepB::kan + pTetBHR2‐LepB designated as CUA‐604. Sixty marine sediment samples from Fiji and 200 from the Channel Islands were processed for the cultivation of marine bacteria. The primary isolation plates were overlaid with strain CUA‐604 and following 24–48 h, colonies showing zones of inhibition were removed and purified using standard microbiological methods. Six strains from Fiji and six from the Channel Islands were confirmed as inhibiting the growth of CUA‐604. It was determined that pH and iron limitation were not the cause of inhibition. The most active strain was identified as a Bacillus sp. To isolate the active compound, multiple overlay plates were prepared and the agar in the zones of inhibition removed and extracted with a variety of organic solvents. The crude butanol, methanol, and acetone extracts were active at a concentration of 10 mg/mL. The results of the bioassay‐guided isolation of the active constituents will be presented.

Asymmetric Synthesis of New β‐Lactam Lipopeptides as Bacterial Signal Peptidase I Inhibitors

AbstractThe transmembrane bacterial enzyme, signal peptidase I, is recognized as being a promising target for reducing the emergence of drug resistance. The asymmetric synthesis and the biological evaluation of original β‐lactam lipopeptides have been performed to discover potent signal peptidase inhibitors. The importance of the azetidinone motif of these lipopeptides has been demonstrated and can serve as a starting point to exploit and improve the reactivity of the β‐lactam in peptidomimetics.

Crystallographic Analysis of Bacterial Signal Peptidase in Ternary Complex with Arylomycin A2 and a β-Sultam Inhibitor

Bacterial type I signal peptidase (SPase I), an essential membrane-bound endopeptidase with a unique Ser/Lys dyad mechanism, is being investigated as a potential novel antibiotic target. We present here binding and inhibition assays along with crystallographic data that shows that the lipohexapeptide-based natural product arylomycin A2 and the morpholino-beta-sultam derivative (BAL0019193) inhibit SPase I by binding to non-overlapping subsites near the catalytic center. The 2.0 A resolution crystal structure of the soluble catalytic domain of Escherichia coli SPase I (SPase I Delta2-75) in ternary complex with arylomycin A2 and BAL0019193 reveals the position of BAL0019193 adjacent to arylomycin A2 within the SPase I binding site. BAL0019193 binds in a noncovalent manner in close proximity to SPase I residues Ser88, Ser90, Lys145, Asn277, Ala279, and Glu307, as well as atom O45 of arylomycin A2. The binding mode of arylomycin A2 in this 2.0 A resolution ternary complex is compared to that seen in the previous 2.5 A resolution arylomycin A2-SPase cocrystal structure. This work contributes to our understanding of SPase I inhibitor/substrate recognition and should prove helpful in the further development of novel antibiotics based on the inhibition of SPase I.

Synthesis and biological evaluation of penem inhibitors of bacterial signal peptidase

We report the first synthesis of a 5 S penem, known to bind bacterial type I signal peptidase, from the commercially available and inexpensive 6-aminopenicillanic acid. We report the first in vivo activity of the compound and use structure–activity relationship studies to begin to define the determinants of signal peptidase binding and also to begin to optimize the penem as an antibiotic.

Structural and Initial Biological Analysis of Synthetic Arylomycin A2

The growing threat of untreatable bacterial infections has refocused efforts to identify new antibiotics, especially those acting by novel mechanisms. While the inhibition of pathogen proteases has proven to be a successful strategy for drug development, such inhibitors are often limited by toxicity due to their promiscuous inhibition of homologous and mechanistically related human enzymes. Unlike many protease inhibitors, inhibitors of the essential type I bacterial signal peptidase (SPase) may be more specific and thus less toxic due to the enzyme's unique structure and catalytic mechanism. Recently, the arylomycins and related lipoglycopeptide natural products were isolated and shown to inhibit SPase. The core structure of the arylomycins and lipoglycopeptides consists of a biaryl-linked, N-methylated peptide macrocycle attached to a lipopeptide tail, and in the case of the lipoglycopeptides, a deoxymannose moiety. Herein, we report the first total synthesis of a member of this group of antibiotics, arylomycin A2. The synthesis relies on Suzuki-Miyaura-mediated biaryl coupling, which model studies suggested would be more efficient than a lactamization-based route. Biological studies demonstrate that these compounds are promising antibiotics, especially against Gram-positive pathogens, with activity against S. epidermidis that equals that of the currently prescribed antibiotics. Structural and biological studies suggest that both N-methylation and lipidation may contribute to antibiotic activity, whereas glycosylation appears to be generally less critical. Thus, these studies help identify the determinants of the biological activity of arylomycin A2 and should aid in the design of analogs to further explore and develop this novel class of antibiotic.

Crystal Structure of the VP4 Protease from Infectious Pancreatic Necrosis Virus Reveals the Acyl-Enzyme Complex for an Intermolecular Self-cleavage Reaction

Infectious pancreatic necrosis virus (IPNV), an aquatic birnavirus that infects salmonid fish, encodes a large polyprotein (NH(2)-pVP2-VP4-VP3-COOH) that is processed through the proteolytic activity of its own protease, VP4, to release the proteins pVP2 and VP3. pVP2 is further processed to give rise to the capsid protein VP2 and three peptides that are incorporated into the virion. Reported here are two crystal structures of the IPNV VP4 protease solved from two different crystal symmetries. The electron density at the active site in the triclinic crystal form, refined to 2.2-A resolution, reveals the acyl-enzyme complex formed with an internal VP4 cleavage site. The complex was generated using a truncated enzyme in which the general base lysine was substituted. Inside the complex, the nucleophilic Ser(633)Ogamma forms an ester bond with the main-chain carbonyl of the C-terminal residue, Ala(716), of a neighboring VP4. The structure of this substrate-VP4 complex allows us to identify the S1, S3, S5, and S6 substrate binding pockets as well as other substrate-VP4 interactions and therefore provides structural insights into the substrate specificity of this enzyme. The structure from the hexagonal crystal form, refined to 2.3-A resolution, reveals the free-binding site of the protease. Three-dimensional alignment with the VP4 of blotched snakehead virus, another birnavirus, shows that the overall structure of VP4 is conserved despite a low level of sequence identity ( approximately 19%). The structure determinations of IPNV VP4, the first of an acyl-enzyme complex for a Ser/Lys dyad protease, provide insights into the catalytic mechanism and substrate recognition of this type of protease.

Novel Lipoglycopeptides as Inhibitors of Bacterial Signal Peptidase I

Signal peptidase (SPase) I is responsible for the cleavage of signal peptides of many secreted proteins in bacteria. Because of its unique physiological and biochemical properties, it serves as a potential target for development of novel antibacterial agents. In this study, we report the production, isolation, and structure determination of a family of structurally related novel lipoglycopeptides from a Streptomyces sp. as inhibitors of SPase I. Detailed spectroscopic analyses, including MS and NMR, revealed that these lipoglycopeptides share a common 14-membered cyclic peptide core, an acyclic tripeptide chain, and a deoxy-alpha-mannose sugar, but differ in the degree of oxidation of the N-methylphenylglycine residue and the length and branching of the fatty acyl chain. Biochemical analysis demonstrated that these peptides are potent and competitive inhibitors of SPase I with K(i) 50 to 158 nm. In addition, they showed modest antibacterial activity against a panel of pathogenic Gram-positive and Gram-negative bacteria with minimal inhibitory concentration of 8-64 microm against Streptococcus pneumonniae and 4-8 microm against Escherichia coli. Notably, they mechanistically blocked the protein secretion in whole cells as demonstrated by inhibiting beta-lactamase release from Staphylococcus aureus. Taken together, the present discovery of a family of novel lipoglycopeptides as potent inhibitors of bacterial SPase I may lead to the development of a novel class of broad-spectrum antibiotics.

Crystallographic and Biophysical Analysis of a Bacterial Signal Peptidase in Complex with a Lipopeptide-based Inhibitor

We report here the crystallographic and biophysical analysis of a soluble, catalytically active fragment of the Escherichia coli type I signal peptidase (SPase Delta2-75) in complex with arylomycin A2. The 2.5-A resolution structure revealed that the inhibitor is positioned with its COOH-terminal carboxylate oxygen (O45) within hydrogen bonding distance of all the functional groups in the catalytic center of the enzyme (Ser90 O-gamma, Lys145 N-zeta, and Ser88 O-gamma) and that it makes beta-sheet type interactions with the beta-strands that line each side of the binding site. Ligand binding studies, calorimetry, fluorescence spectroscopy, and stopped-flow kinetics were also used to analyze the binding mode of this unique non-covalently bound inhibitor. The crystal structure was solved in the space group P4(3)2(1)2. A detailed comparison is made to the previously published acyl-enzyme inhibitor complex structure (space group: P2(1)2(1)2) and the apo-enzyme structure (space group: P4(1)2(1)2). Together this work provides insights into the binding of pre-protein substrates to signal peptidase and will prove helpful in the development of novel antibiotics.

Lipoprotein processing is required for virulence of Mycobacterium tuberculosis.

Lipoproteins are a subgroup of secreted bacterial proteins characterized by a lipidated N-terminus, processing of which is mediated by the consecutive activity of prolipoprotein diacylglyceryl transferase (Lgt) and lipoprotein signal peptidase (LspA). The study of LspA function has been limited mainly to non-pathogenic microorganisms. To study a potential role for LspA in the pathogenesis of bacterial infections, we have disrupted lspA by allelic replacement in Mycobacterium tuberculosis, one of the world's most devastating pathogens. Despite the presence of an impermeable lipid outer layer, it was found that LspA was dispensable for growth under in vitro culture conditions. In contrast, the mutant was markedly attenuated in virulence models of tuberculosis. Our findings establish lipoprotein metabolism as a major virulence determinant of tuberculosis and define a role for lipoprotein processing in bacterial pathogenesis. In addition, these results hint at a promising new target for therapeutic intervention, as a highly specific inhibitor of bacterial lipoprotein signal peptidases is available.