Bacterial Artificial Chromosome Contig Research Articles

Fine mapping of a major locus representing the lack of prickles in eggplant revealed the availability of a 0.5-kb insertion/deletion for marker-assisted selection.

As prickles cause labour inefficiency during cultivation and scratches on the skin of fruits during transportation, they are considered undesirable traits of eggplant (Solanum melongena L.). Because the molecular basis of prickle emergence has not been entirely revealed in plants, we mapped an eggplant semi-dominant Prickle (Pl) gene locus, which causes the absence of prickles, on chromosome 6 of a linkage map of the F2 population derived from crossing the no-prickly cultivar ‘Togenashi-senryo-nigo’ and the prickly line LS1934. By performing synteny mapping with tomato, the genomic region corresponding to the eggplant Pl locus was identified. Through bacterial artificial chromosome (BAC) screening, positive BAC clones and the contig sequence that harbour the Pl locus in the prickly eggplant genome were revealed. The BAC contig length was 133 kb, and it contained 16 predicted genes. Among them, a characteristic 0.5-kb insertion/deletion was detected. As the 0.5-kb insertion was commonly identified with the prickly phenotype worldwide, a primer pair that amplifies the insertion/deletion could be used for marker-assisted selection of the no-prickly phenotype. Such findings contribute to map-based-cloning of the Pl gene and the understanding of gene function, ultimately providing new insights into the regulatory molecular mechanisms underlying prickle emergence in plants.

Development of a Sequence-Based Reference Physical Map of Pea (Pisum sativum L.).

Whole genome profiling (WGP) is a sequence-based physical mapping technology and uses sequence tags generated by next generation sequencing for construction of bacterial artificial chromosome (BAC) contigs of complex genomes. The physical map provides a framework for assembly of genome sequence and information for localization of genes that are difficult to find through positional cloning. To address the challenges of accurate assembly of the pea genome (∼4.2 GB of which approximately 85% is repetitive sequences), we have adopted the WGP technology for assembly of a pea BAC library. Multi-dimensional pooling of 295,680 BAC clones and sequencing the ends of restriction fragments of pooled DNA generated 1,814 million high quality reads, of which 825 million were deconvolutable to 1.11 million unique WGP sequence tags. These WGP tags were used to assemble 220,013 BACs into contigs. Assembly of the BAC clones using the modified Fingerprinted Contigs (FPC) program has resulted in 13,040 contigs, consisting of 213,719 BACs, and 6,294 singleton BACs. The average contig size is 0.33 Mbp and the N50 contig size is 0.62 Mbp. WGPTM technology has proved to provide a robust physical map of the pea genome, which would have been difficult to assemble using traditional restriction digestion based methods. This sequence-based physical map will be useful to assemble the genome sequence of pea. Additionally, the 1.1 million WGP tags will support efficient assignment of sequence scaffolds to the BAC clones, and thus an efficient sequencing of BAC pools with targeted genome regions of interest.

Development of locus specific sub‐clone separation by fluorescence in situ hybridization in suspension in chronic lymphocytic leukemia

Intra-tumor genetic heterogeneity is a hallmark of cancer. The ability to monitor and analyze these sub-clonal cell populations can be considered key to successful treatment, particularly in the modern era of targeted therapies. Although advances in sequencing technologies have significantly improved our ability to analyze the mutational landscape of tumors, this utility is reduced when considering small, but clinically significant sub-clones, that is, those representing <10% of the tumor burden. We have developed a high-throughput method that utilizes a 17-probe labeled bacterial artificial chromosome contig to quantify sub-clonal populations of cells based on deletion of a single locus. Chronic lymphocytic leukemia (CLL) cells harboring deletion of the short arm of chromosome 17 (del17p), an important prognostic marker for CLL were used to demonstrate the technique. Sub-clones of del17p cells were quantified and isolated from heterogeneous CLL populations using fluorescence in situ hybridization in suspension (FISH-IS) and the locus specific probe set. Using the combination of FISH-IS with the locus-specific probe set enables automated analysis of tens of thousands of cells, accurately quantifying and isolating cells carrying a del17p. Based on the fluorescence intensity of 17p probes, 17p (TP53) deleted cells were identified and sorted using flow cytometric techniques, and enrichment was demonstrated using single nucleotide polymorphism analysis. The ability to separate sub-clones of cells based on genetic heterogeneity, independent of the clone size, highlights the potential application of this method not only in the diagnostic and prognostic setting, but also as an unbiased approach to enable further detailed genetic analysis of the sub-clone with deep sequencing approaches. © 2017 International Society for Advancement of Cytometry.

The Solanum demissum R8 late blight resistance gene is an Sw-5 homologue that has been deployed worldwide in late blight resistant varieties.

Key messageThe potato late blight resistance geneR8has been cloned.R8is found in five late blight resistant varieties deployed in three different continents. R8 recognises Avr8 and is homologous to the NB-LRR protein Sw-5 from tomato.The broad spectrum late blight resistance gene R8 from Solanum demissum was cloned based on a previously published coarse map position on the lower arm of chromosome IX. Fine mapping in a recombinant population and bacterial artificial chromosome (BAC) library screening resulted in a BAC contig spanning 170 kb of the R8 haplotype. Sequencing revealed a cluster of at least ten R gene analogues (RGAs). The seven RGAs in the genetic window were subcloned for complementation analysis. Only one RGA provided late blight resistance and caused recognition of Avr8. From these results, it was concluded that the newly cloned resistance gene was indeed R8. R8 encodes a typical intracellular immune receptor with an N-terminal coiled coil, a central nucleotide binding site and 13 C-terminal leucine rich repeats. Phylogenetic analysis of a set of representative Solanaceae R proteins shows that R8 resides in a clearly distinct clade together with the Sw-5 tospovirus R protein from tomato. It was found that the R8 gene is present in late blight resistant potato varieties from Europe (Sarpo Mira), USA (Jacqueline Lee, Missaukee) and China (PB-06, S-60). Indeed, when tested under field conditions, R8 transgenic potato plants showed broad spectrum resistance to the current late blight population in the Netherlands, similar to Sarpo Mira.Electronic supplementary materialThe online version of this article (doi:10.1007/s00122-016-2740-0) contains supplementary material, which is available to authorized users.

Painting of Arabidopsis Chromosomes with Chromosome-Specific BAC Clones.

Chromosome painting (CP) refers to fluorescence in situ hybridization (FISH) of chromosome-specific DNA probes to identify large chromosome regions, chromosome arms, and whole chromosomes. For CP and CCP (comparative chromosome painting) in plants, most often, contigs of chromosome-specific bacterial artificial chromosomes (BAC) from the species of origin or a related species are used as painting probes. CP enables visualization and tracing of particular chromosome regions and/or chromosomes throughout all mitotic and meiotic stages as well as the corresponding interphase chromosome territories. CCP enables identification of large-scale homeologous chromosome regions and chromosomes shared among two or more species. Here, a step-by-step protocol for carrying out CP in Arabidopsis thaliana (Arabidopsis) and CCP in other crucifer taxa based on the use of Arabidopsis chromosome-specific BAC contigs is described. © 2016 by John Wiley & Sons, Inc.

Fast‐forward genetics by radiation hybrids to saturate the locus regulating nuclear–cytoplasmic compatibility in Triticum

SummaryThe nuclear‐encoded species cytoplasm specific (scs) genes control nuclear–cytoplasmic compatibility in wheat (genus Triticum). Alloplasmic cells, which have nucleus and cytoplasm derived from different species, produce vigorous and vital organisms only when the correct version of scs is present in their nucleus. In this study, bulks of in vivo radiation hybrids segregating for the scs phenotype have been genotyped by sequencing with over 1.9 million markers. The high marker saturation obtained for a critical region of chromosome 1D allowed identification of 3318 reads that mapped in close proximity of the scs. A novel in silico approach was deployed to extend these short reads to sequences of up to 70 Kb in length and identify candidate open reading frames (ORFs). Markers were developed to anchor the short contigs containing ORFs to a radiation hybrid map of 650 individuals with resolution of 288 Kb. The region containing the scs locus was narrowed to a single Bacterial Artificial Chromosome (BAC) contig of Aegilops tauschii. Its sequencing and assembly by nano‐mapping allowed rapid identification of a rhomboid gene as the only ORF existing within the refined scs locus. Resequencing of this gene from multiple germplasm sources identified a single nucleotide mutation, which gives rise to a functional amino acid change. Gene expression characterization revealed that an active copy of this rhomboid exists on all homoeologous chromosomes of wheat, and depending on the specific cytoplasm each copy is preferentially expressed. Therefore, a new methodology was applied to unique genetic stocks to rapidly identify a strong candidate gene for the control of nuclear–cytoplasmic compatibility in wheat.

Cloning of the ω-secalin gene family in a wheat 1BL/1RS translocation line using BAC clone sequencing

Background: Wheat 1BL/1RS translocation lines are planted around the world for their disease resistance and high yield. Most of them are poor in bread making, which is partially caused by ω-secalins that are encoded by the ω-secalin gene family, which is located on the short arm of rye chromosome 1R (1RS). However, information on the structure and evolution of the ω-secalin gene family is still limited. Results: We first generated a physical map of the ω-secalin gene family covering 195 kb of the Sec- 1 locus based on sequencing three bacterial artificial chromosome (BAC) clones of the 1BL/1RS translocation wheat cultivar Shimai 15. A BAC contig was constructed spanning 168 kb of the Sec -1 locus on 1RS. Twelve ω-secalin genes were arranged in a head-to-tail fashion, separated by 8.2-21.6 kb spacers on the contig, whereas six other ω-secalin genes were arranged head-to-tail, separated by 8.2-8.4 kb of spacers on clone BAC125. The 18 ω-secalin genes can be classified into six types among which eight ω-secalin genes were expressed during seed development. The ω-secalin genes with the 1,074-bp open reading frame (ORF) represented the main population. Except for two pseudogenes, the N-terminal of the ω-secalin gene was conserved, whereas variations in the C-terminal led to a change in ORF length. The spacers can be sorted into two classes. Class-1 spacers contained conserved and non-conservative sequences. Conclusion: The ω-secalin gene family consisted of at least 18 members in the 1BL/1RS translocation line cv. Shimai 15. Eight ω-secalin genes were expressed during seed development. Eighteen members may originate from a progenitor with a 1,074-bp ORF. The spacers differed in length and sequence conservation.

A comprehensive analysis of the chorion locus in silkmoth.

Despite more than 40 years of intense study, essential features of the silkmoth chorion (eggshell) are still not fully understood. To determine the precise structure of the chorion locus, we performed extensive EST analysis, constructed a bacterial artificial chromosome (BAC) contig, and obtained a continuous genomic sequence of 871,711 base pairs. We annotated 127 chorion genes in two segments interrupted by a 164 kb region with 5 non-chorion genes, orthologs of which were on chorion bearing scaffolds in 4 ditrysian families. Detailed transcriptome analysis revealed expression throughout choriogenesis of most chorion genes originally categorized as “middle”, and evidence for diverse regulatory mechanisms including cis-elements, alternative splicing and promoter utilization, and antisense RNA. Phylogenetic analysis revealed multigene family associations and faster evolution of early chorion genes and transcriptionally active pseudogenes. Proteomics analysis identified 99 chorion proteins in the eggshell and micropyle localization of 1 early and 6 Hc chorion proteins.

Cytogenetic mapping with centromeric bacterial artificial chromosomes contigs shows that this recombination-poor region comprises more than half of barley chromosome 3H.

Genetic maps are based on the frequency of recombination and often show different positions of molecular markers in comparison to physical maps, particularly in the centromere that is generally poor in meiotic recombinations. To decipher the position and order of DNA sequences genetically mapped to the centromere of barley (Hordeum vulgare) chromosome 3H, fluorescence in situ hybridization with mitotic metaphase and meiotic pachytene chromosomes was performed with 70 genomic single-copy probes derived from 65 fingerprinted bacterial artificial chromosomes (BAC) contigs genetically assigned to this recombination cold spot. The total physical distribution of the centromeric 5.5 cM bin of 3H comprises 58% of the mitotic metaphase chromosome length. Mitotic and meiotic chromatin of this recombination-poor region is preferentially marked by a heterochromatin-typical histone mark (H3K9me2), while recombination enriched subterminal chromosome regions are enriched in euchromatin-typical histone marks (H3K4me2, H3K4me3, H3K27me3) suggesting that the meiotic recombination rate could be influenced by the chromatin landscape.

A high-resolution physical map integrating an anchored chromosome with the BAC physical maps of wheat chromosome 6B.

BackgroundA complete genome sequence is an essential tool for the genetic improvement of wheat. Because the wheat genome is large, highly repetitive and complex due to its allohexaploid nature, the International Wheat Genome Sequencing Consortium (IWGSC) chose a strategy that involves constructing bacterial artificial chromosome (BAC)-based physical maps of individual chromosomes and performing BAC-by-BAC sequencing. Here, we report the construction of a physical map of chromosome 6B with the goal of revealing the structural features of the third largest chromosome in wheat.ResultsWe assembled 689 informative BAC contigs (hereafter reffered to as contigs) representing 91 % of the entire physical length of wheat chromosome 6B. The contigs were integrated into a radiation hybrid (RH) map of chromosome 6B, with one linkage group consisting of 448 loci with 653 markers. The order and direction of 480 contigs, corresponding to 87 % of the total length of 6B, were determined. We also characterized the contigs that contained a part of the nucleolus organizer region or centromere based on their positions on the RH map and the assembled BAC clone sequences. Analysis of the virtual gene order along 6B using the information collected for the integrated map revealed the presence of several chromosomal rearrangements, indicating evolutionary events that occurred on chromosome 6B.ConclusionsWe constructed a reliable physical map of chromosome 6B, enabling us to analyze its genomic structure and evolutionary progression. More importantly, the physical map should provide a high-quality and map-based reference sequence that will serve as a resource for wheat chromosome 6B.Electronic supplementary materialThe online version of this article (doi:10.1186/s12864-015-1803-y) contains supplementary material, which is available to authorized users.

Radiation Hybrid Map of Barley Chromosome 3H.

Assembly of the barley (Hordeum vulgare L.) genome is complicated by its large size (5.1 Gb) and proportion of repetitive elements (84%). This process is facilitated by high resolution maps for aligning bacterial artificial chromosome (BAC) contigs along chromosomes. Available genetic maps, however, do not provide accurate information on the physical position of a large portion of the genome located in recombination-poor regions. Radiation hybrid (RH) mapping is an alternative approach, which is based on radiation-induced deletions along the length of chromosomes. In this study, the first RH map for barley chromosome 3H was developed. In total, 373 in vivo RH lines were generated by irradiating wheat (Triticum aestivum L.)-barley chromosome 3H addition lines and crossing them to a normal wheat cultivar. Each RH informative line (containing deletions) had, on average, three deletions. The induced deletion size varied from 36.58 Kb to 576.00 Mb, with an average length of 52.42 Mb. This initial chromosome 3H radiation hybrid (3H-RH) map had a 9.53× higher resolution than an analogous genetic map, reaching a maximum of >262.40× resolution in regions around the centromere. The final RH map was 3066.1 cR in length, with a 0.76 Mb resolution. It was estimated that the map resolution can be improved to an average of 30.34 Kb by saturating the 3H-RH map with molecular markers. The generated RH panel enabled alignment of BAC and sequenced contigs as small as 1.50 Kb in size. The high resolution and the coverage of poor-recombination regions make RH maps an ideal resource for barley genome assembly, as well as other genetic studies.

Whole-genome profiling and shotgun sequencing delivers an anchored, gene-decorated, physical map assembly of bread wheat chromosome 6A.

Bread wheat (Triticum aestivum L.) is the most important staple food crop for 35% of the world's population. International efforts are underway to facilitate an increase in wheat production, of which the International Wheat Genome Sequencing Consortium (IWGSC) plays an important role. As part of this effort, we have developed a sequence-based physical map of wheat chromosome 6A using whole-genome profiling (WGP™). The bacterial artificial chromosome (BAC) contig assembly tools fingerprinted contig (fpc) and linear topological contig (ltc) were used and their contig assemblies were compared. A detailed investigation of the contigs structure revealed that ltc created a highly robust assembly compared with those formed by fpc. The ltc assemblies contained 1217 contigs for the short arm and 1113 contigs for the long arm, with an L50 of 1 Mb. To facilitate in silico anchoring, WGP™ tags underlying BAC contigs were extended by wheat and wheat progenitor genome sequence information. Sequence data were used for in silico anchoring against genetic markers with known sequences, of which almost 79% of the physical map could be anchored. Moreover, the assigned sequence information led to the ‘decoration’ of the respective physical map with 3359 anchored genes. Thus, this robust and genetically anchored physical map will serve as a framework for the sequencing of wheat chromosome 6A, and is of immediate use for map-based isolation of agronomically important genes/quantitative trait loci located on this chromosome.

A multicopy Y-chromosomal SGNH hydrolase gene expressed in the testis of the platyfish has been captured and mobilized by a Helitron transposon

BackgroundTeleost fish present a high diversity of sex determination systems, with possible frequent evolutionary turnover of sex chromosomes and sex-determining genes. In order to identify genes involved in male sex determination and differentiation in the platyfish Xiphophorus maculatus, bacterial artificial chromosome contigs from the sex-determining region differentiating the Y from the X chromosome have been assembled and analyzed.ResultsA novel three-copy gene called teximY (for testis-expressed in Xiphophorus maculatus on the Y) was identified on the Y but not on the X chromosome. A highly related sequence called texim1, probably at the origin of the Y-linked genes, as well as three more divergent texim genes were detected in (pseudo)autosomal regions of the platyfish genome. Texim genes, for which no functional data are available so far in any organism, encode predicted esterases/lipases with a SGNH hydrolase domain. Texim proteins are related to proteins from very different origins, including proteins encoded by animal CR1 retrotransposons, animal platelet-activating factor acetylhydrolases (PAFah) and bacterial hydrolases. Texim gene distribution is patchy in animals. Texim sequences were detected in several fish species including killifish, medaka, pufferfish, sea bass, cod and gar, but not in zebrafish. Texim-like genes are also present in Oikopleura (urochordate), Amphioxus (cephalochordate) and sea urchin (echinoderm) but absent from mammals and other tetrapods. Interestingly, texim genes are associated with a Helitron transposon in different fish species but not in urochordates, cephalochordates and echinoderms, suggesting capture and mobilization of an ancestral texim gene in the bony fish lineage. RT-qPCR analyses showed that Y-linked teximY genes are preferentially expressed in testis, with expression at late stages of spermatogenesis (late spermatids and spermatozeugmata).ConclusionsThese observations suggest either that TeximY proteins play a role in Helitron transposition in the male germ line in fish, or that texim genes are spermatogenesis genes mobilized and spread by transposable elements in fish genomes.

Intergenomic single nucleotide polymorphisms as a tool for bacterial artificial chromosome contig building of homoeologous Brassica napus regions.

BackgroundHomoeologous sequences pose a particular challenge if bacterial artificial chromosome (BAC) contigs shall be established for specific regions of an allopolyploid genome. Single nucleotide polymorphisms (SNPs) differentiating between homoeologous genomes (intergenomic SNPs) may represent a suitable screening tool for such purposes, since they do not only identify homoeologous sequences but also differentiate between them.ResultsSequence alignments between Brassica rapa (AA) and Brassica oleracea (CC) sequences mapping to corresponding regions on chromosomes A1 and C1, respectively were used to identify single nucleotide polymorphisms between the A and C genomes. A large fraction of these polymorphisms was also present in Brassica napus (AACC), an allopolyploid species that originated from hybridisation of A and C genome species. Intergenomic SNPs mapping throughout homoeologous chromosome segments spanning approximately one Mbp each were included in Illumina’s GoldenGate® Genotyping Assay and used to screen multidimensional pools of a Brassica napus bacterial artificial chromosome library with tenfold genome coverage. Based on the results of 50 SNP assays, a BAC contig for the Brassica napus A subgenome was established that spanned the entire region of interest. The C subgenome region was represented in three BAC contigs.ConclusionsThis proof-of-concept study shows that sequence resources of diploid progenitor genomes can be used to deduce intergenomic SNPs suitable for multiplex polymerase chain reaction (PCR)-based screening of multidimensional BAC pools of a polyploid organism. Owing to their high abundance and ease of identification, intergenomic SNPs represent a versatile tool to establish BAC contigs for homoeologous regions of a polyploid genome.Electronic supplementary materialThe online version of this article (doi:10.1186/1471-2164-15-560) contains supplementary material, which is available to authorized users.

Proliferation and copy number variation of BEL-like long terminal repeat retrotransposons within the Diabrotica virgifera virgifera genome

The proliferation of retrotransposons within a genome can contribute to increased size and affect the function of eukaryotic genes. BEL/Pao-like long-terminal repeat (LTR) retrotransposons were annotated from the highly adaptable insect species Diabrotica virgifera virgifera, the Western corn rootworm, using survey sequences from bacterial artificial chromosome (BAC) inserts and contigs derived from a low coverage next-generation genome sequence assembly. Eleven unique D. v. virgifera BEL elements were identified that contained full-length gag–pol coding sequences, whereas 88 different partial coding regions were characterized from partially assembled elements. Estimated genome copy number for full and partial BEL-like elements ranged from ~8 to 1582 among individual contigs using a normalized depth of coverage (DOC) among Illumina HiSeq reads (total genome copy number ~8821). BEL element copy number was correlated among different D. v. virgifera populations (R2=0.9846), but individual element numbers varied ≤1.68-fold and the total number varied by ~527 copies. These data indicate that BEL element proliferation likely contributed to a large genome size, and suggest that differences in copy number are a source of genetic variability among D. v. virgifera.

Molecular mapping of the Pi2/9 allelic gene Pi2-2 conferring broad-spectrum resistance to Magnaporthe oryzae in the rice cultivar Jefferson.

BackgroundUtilization of broad-spectrum resistance (R) genes is an effective and economical strategy to control the fungal pathogen Magnaporthe oryzae, the causal agent of the rice blast disease. Among the cloned blast resistance genes, Pi9, Pi2 and Piz-t confer broad-spectrum resistance to diverse M. oryzae isolates and were isolated from the Pi2/9 locus on chromosome 6. Identification and isolation of additional R genes with different resistance spectra from this locus will provide novel genetic resources for better control of this important rice disease.ResultsIn this study, we identified a dominant R gene, Pi2-2, at the Pi2/9 locus from Jefferson, an elite U.S. rice cultivar, through genetic and physical mapping. Inoculation tests showed that Jefferson has different resistant specificities to M. oryzae isolates compared rice lines with the Pi9, Pi2 and Piz-t genes. Fine mapping delimited Pi2-2 to a 270-kb interval between the markers AP5659-3 and RM19817, and this interval contains three nucleotide-binding site-leucine-rich repeat (NBS-LRR) genes in the Nipponbare genome. Five bacterial artificial chromosome (BAC) clones spanning the region were identified, and a BAC contig covering the Pi2-2 locus was constructed.ConclusionsWe identified a new allelic gene at the Pi2/9 locus and fine-mapped the gene within a 270-kb region. Our results provide essential information for the isolation of the Pi2-2 gene and tightly linked DNA markers for rice blast resistance breeding.Electronic supplementary materialThe online version of this article (doi:10.1186/1939-8433-5-29) contains supplementary material, which is available to authorized users.

Physical mapping of a pollen modifier locus controlling self-incompatibility in apricot and synteny analysis within the Rosaceae

S-locus products (S-RNase and F-box proteins) are essential for the gametophytic self-incompatibility (GSI) specific recognition in Prunus. However, accumulated genetic evidence suggests that other S-locus unlinked factors are also required for GSI. For instance, GSI breakdown was associated with a pollen-part mutation unlinked to the S-locus in the apricot (Prunus armeniaca L.) cv. 'Canino'. Fine-mapping of this mutated modifier gene (M-locus) and the synteny analysis of the M-locus within the Rosaceae are here reported. A segregation distortion loci mapping strategy, based on a selectively genotyped population, was used to map the M-locus. In addition, a bacterial artificial chromosome (BAC) contig was constructed for this region using overlapping oligonucleotides probes, and BAC-end sequences (BES) were blasted against Rosaceae genomes to perform micro-synteny analysis. The M-locus was mapped to the distal part of chr.3 flanked by two SSR markers within an interval of 1.8cM corresponding to ~364Kb in the peach (Prunus persica L. Batsch) genome. In the integrated genetic-physical map of this region, BES were mapped against the peach scaffold_3 and BACs were anchored to the apricot map. Micro-syntenic blocks were detected in apple (Malus×domestica Borkh.) LG17/9 and strawberry (Fragaria vesca L.) FG6 chromosomes. The M-locus fine-scale mapping provides a solid basis for self-compatibility marker-assisted selection and for positional cloning of the underlying gene, a necessary goal to elucidate the pollen rejection mechanism in Prunus. In a wider context, the syntenic regions identified in peach, apple and strawberry might be useful to interpret GSI evolution in Rosaceae.

A bacterial artificial chromosome library for ‘Jefferson’ hazelnut and identification of clones associated with eastern filbert blight resistance and pollen–stigma incompatibility

European hazelnut (Corylus avellana L.) is the only economically important nut crop in the family Betulaceae. Because of its small genome size (~385 Mb / 1C), relatively short life cycle, availability of a dense linkage map, and amenability to transformation by Agrobacterium, the European hazelnut could serve as a model plant for the Betulaceae. Here we report the construction of a bacterial artificial chromosome (BAC) library for 'Jefferson' hazelnut using the cloning enzyme MboI and the vector pECBAC1 (BamHI site). The library consists of 39,936 clones arrayed in 104,384-well microtitre plates with a mean insert size of 117 kb. The genomic coverage of the library is estimated to be about 12 genome equivalents. This library provides a valuable resource for the map-based cloning of two important genes, the resistance gene from 'Gasaway' that confers resistance to eastern filbert blight caused by the fungus Anisogramma anomala (Peck) E. Müller and the S locus that controls pollen-stigma incompatibility. Fine-resolution mapping near the two loci was carried out using random amplified polymorphic DNA (RAPD) and simple sequence repeat (SSR) markers. Fine mapping at the disease resistance locus showed that markers W07-375 and X01-825 flanked the resistance locus at distances of 0.06 and 0.05 cM, respectively. The S locus is flanked by markers 204-950 and KG819-200 at distances of 0.14 and 0.24 cM, respectively. Assuming that 1 cM corresponds to a physical distance of 430 kb, it will take approximately two to three chromosome walks to assemble BAC contigs that span both loci.

A comparative physical map reveals the pattern of chromosomal evolution between the turkey (Meleagris gallopavo) and chicken (Gallus gallus) genomes

BackgroundA robust bacterial artificial chromosome (BAC)-based physical map is essential for many aspects of genomics research, including an understanding of chromosome evolution, high-resolution genome mapping, marker-assisted breeding, positional cloning of genes, and quantitative trait analysis. To facilitate turkey genetics research and better understand avian genome evolution, a BAC-based integrated physical, genetic, and comparative map was developed for this important agricultural species.ResultsThe turkey genome physical map was constructed based on 74,013 BAC fingerprints (11.9 × coverage) from two independent libraries, and it was integrated with the turkey genetic map and chicken genome sequence using over 41,400 BAC assignments identified by 3,499 overgo hybridization probes along with > 43,000 BAC end sequences. The physical-comparative map consists of 74 BAC contigs, with an average contig size of 13.6 Mb. All but four of the turkey chromosomes were spanned on this map by three or fewer contigs, with 14 chromosomes spanned by a single contig and nine chromosomes spanned by two contigs. This map predicts 20 to 27 major rearrangements distinguishing turkey and chicken chromosomes, despite up to 40 million years of separate evolution between the two species. These data elucidate the chromosomal evolutionary pattern within the Phasianidae that led to the modern turkey and chicken karyotypes. The predominant rearrangement mode involves intra-chromosomal inversions, and there is a clear bias for these to result in centromere locations at or near telomeres in turkey chromosomes, in comparison to interstitial centromeres in the orthologous chicken chromosomes.ConclusionThe BAC-based turkey-chicken comparative map provides novel insights into the evolution of avian genomes, a framework for assembly of turkey whole genome shotgun sequencing data, and tools for enhanced genetic improvement of these important agricultural and model species.

Investigation of genome structure of a cinnamyl alcohol dehydrogenase locus in a basal angiosperm hardwood species, Liriodendron tulipifera L., reveals low synteny

Abstract Basal angiosperms contain a wide diversity of floral and growth forms and gave rise to the largest recent angiosperm lineages. As none of the basal angiosperm genomes has been sequenced, examining large bacterial artificial chromosome (BAC) inserts remains the main approach to providing a first glimpse of the structure and organization of their genomes. In this study, we sequenced a 126.9‐kbp BAC contig harboring a cinnamyl alcohol dehydrogenase gene (LtuCAD1) in a basal angiosperm species, Liriodendron tulipifera L., an important timber tree species with significant ecological and economic values. A key enzyme in lignin biosynthesis, CAD catalyzes the final step in the synthesis of monolignols. We carried out phylogenetic analyses of seven full‐length CAD family genes (LtuCAD1–7) obtained from a comprehensive Liriodendron expressed sequence tag dataset. The phylogenetic tree suggests that LtuCAD1 is the primary CAD gene involved in lignifications as it is the only Liriodendron CAD grouped with the bona fide CADs class. As well as the LtuCAD1, the BAC contig contained fragmented sequences for one integrase, eight hypothetical proteins, two gag‐pol polyproteins, one RNase H family protein, and one chromatin binding protein. Comparative analysis with other angiosperm species suggests that the genomic segment in this BAC has undergone frequent arrangement. This study is our initial step in identifying and understanding lignin biosynthesis genes from basal angiosperm species. Such knowledge can help bridge the information gap between hardwood (angiosperm) and softwood (gymnosperm) species and benefit potential breeding and biotechnology application for enhanced production of biomass and digestibility in L. tulipifera.