Fibril Axis Research Articles

CryoEM Investigation of Three-Dimentional Structure of the Stx-Converting Bacteriophage ϕ24B

A modified method for culturing, concentrating, and purifying phage ϕ24B preparations was developed. In particular, a new lysogenic phage-producing strain lacking flagella was used, induction conditions were optimized, and purification in a sucrose gradient and concentration by deposition on a Freon 113 cushion were used. Using this method, a preparation of the Stx-converting bacteriophage ϕ24B was obtained, which was suitable for direct analysis by the cryoEM method. Based on cryoEM data for this phage, the first primary three-dimensional reconstruction of its virions was performed. The structure of the phage ϕ24B tail is described. It was shown that the adsorption apparatus of this virus is represented by six thin lateral fibrils and an axial fibril located at the end of the tail. This arrangement of the tail structure is consistent with the previously proposed hypothesis based on analysis of the receptor binding proteins (RBPs) of this bacteriophage.

Morphological and Biophysical Study of S100A9 Protein Fibrils by Atomic Force Microscopy Imaging and Nanomechanical Analysis.

Atomic force microscopy (AFM) imaging enables the visualization of protein molecules with high resolution, providing insights into their shape, size, and surface topography. Here, we use AFM to study the aggregation process of protein S100A9 in physiological conditions, in the presence of calcium at a molar ratio 4Ca2+:S100A9. We find that S100A9 readily assembles into a worm-like fibril, with a period dimension along the fibril axis of 11.5 nm. The fibril's chain length extends up to 136 periods after an incubation time of 144 h. At room temperature, the fibril's bending stiffness was found to be 2.95×10-28 Nm2, indicating that the fibrils are relatively flexible. Additionally, the values obtained for the Young's modulus (Ex=6.96×105 Pa and Ey=3.37×105 Pa) are four orders of magnitude lower than those typically reported for canonical amyloid fibrils. Our findings suggest that, under the investigated conditions, a distinct aggregation mechanism may be in place in the presence of calcium. Therefore, the findings reported here could have implications for the field of biomedicine, particularly with regard to Alzheimer's disease.

Unveiling the True Nature of Plasma Dynamics from the Reference Frame of a Superpenumbral Fibril

The magnetic geometry of the solar atmosphere, combined with projection effects, makes it difficult to accurately map the propagation of ubiquitous waves in fibrillar structures. These waves are of interest due to their ability to carry energy into the chromosphere and deposit it through damping and dissipation mechanisms. To this end, the Interferometric Bidimensional Spectrometer at the Dunn Solar Telescope was employed to capture high-resolution Hα spectral scans of a sunspot, with the transverse oscillations of a prominent superpenumbral fibril examined in depth. The oscillations are reprojected from the helioprojective Cartesian frame to a new frame of reference oriented along the average fibril axis through nonlinear force-free field extrapolations. The fibril was found to be carrying an elliptically polarized, propagating kink oscillation with a period of 430 s and a phase velocity of 69 ± 4 km s−1. The oscillation is damped as it propagates away from the sunspot with a damping length of approximately 9.2 Mm, resulting in the energy flux decreasing at a rate on the order of 460 W m−2/Mm. The Hα line width is examined and found to increase with distance from the sunspot, a potential sign of a temperature increase. Different linear and nonlinear mechanisms are investigated for the damping of the wave energy flux, but a first-order approximation of their combined effects is insufficient to recreate the observed damping length by a factor of at least 3. It is anticipated that the reprojection methodology demonstrated in this study will aid with future studies of transverse waves within fibrillar structures.

Curved mineral platelets in bone

Bone is a composite material principally made up of a mineral phase (apatite) and collagen fibrils. The mineral component of bone occurs in the form of polycrystalline platelets 2–6 nm in thickness. These platelets are packed and probably glued together in stacks of two or more, ranging up to >30 platelets. Here we show that most of these stacks are curved flat sheets whose cylindrical axes are oriented parallel to the long axes of collagen fibrils. Consequently, the curvature of the platelets is not detectable in TEM sections cut parallel to the collagen fibril axes. The radius of curvature around these axes ranges from about 25 nm (the average radius of the collagen fibrils) to 100′s of nm. The shapes of these curved forms contribute to the compressive strength of bone. Statement of significanceBone, the material of which bones are made, is mainly composed of a protein, collagen, and the mineral apatite (calcium phosphate). The crystals have long been known to be flat plates about 5 nanometers (nm) thick. Here we show that the crystals are bound together in curved platelets with a radius of curvature between 25 and several hundred nm, which weave between fibrils of collagen. Some platelets wrap tightly around fibrils. The platelets form stacks of from two to up to 30. The crystals in the platelets are all oriented parallel to the cylindrical fibrils even though most crystals are not in contact with collagen. These curved structures provide greater strength to bone.

Atomic resolution structure of full-length human insulin fibrils

Patients with type 1 diabetes mellitus who are dependent on an external supply of insulin develop insulin-derived amyloidosis at the sites of insulin injection. A major component of these plaques is identified as full-length insulin consisting of the two chains A and B. While there have been several reports that characterize insulin misfolding and the biophysical properties of the fibrils, atomic-level information on the insulin fibril architecture remains elusive. We present here an atomic resolution structure of a monomorphic insulin amyloid fibril that has been determined using magic angle spinning solid-state NMR spectroscopy. The structure of the insulin monomer yields a U-shaped fold in which the two chains A and B are arranged in parallel to each other and are oriented perpendicular to the fibril axis. Each chain contains two β-strands. We identify two hydrophobic clusters that together with the three preserved disulfide bridges define the amyloid core structure. The surface of the monomeric amyloid unit cell is hydrophobic implicating a potential dimerization and oligomerization interface for the assembly of several protofilaments in the mature fibril. The structure provides a starting point for the development of drugs that bind to the fibril surface and disrupt secondary nucleation as well as for other therapeutic approaches to attenuate insulin aggregation.

Effect of plate orientation on apparent thickness of mineral plates by transmission electron microscopy.

Transmission electron microscopy (TEM) is widely used to study the ultrastructure of bone. The mineral of bone occurs as polycrystalline mineral plates about 3 to 6 nm in thickness. A problem in using TEM to make quantitative analyses of bone is that the orientation of the plates with respect to the plane of the section being imaged is expected to affect their apparent thickness. The purpose of this study was to test if this was true, if the apparent thickness of plates changed substantially as a result of tilt of the section. We prepared TEM sections of samples of cortical human bone by ion beam milling, orienting one section parallel to the collagen fibril axes and one perpendicular to them. We obtained TEM bright field and HAADF images of these sections, tilting the sections up to ± 20° at 2° intervals and measuring the apparent thickness of individual mineral platelets at each angle of tilt. Thickness appears to double as section is tilted ± 20°. True thickness of plates is determined by tilting the section along an axis parallel to the plate orientation and determining the minimum apparent thickness. However, as plates are tilted away from minimum-thickness orientation, they become less well-resolved, disappearing when tilted more than 20°. We therefore also measured apparent thickness of only the darkest (most electron scattering) plate images in an untilted section and obtained the same average thickness as that obtained by tilting. We conclude that tilting of the section is not necessary to obtain an accurate measurement of the thickness of mineral plates.

Understanding Self-Assembly and Molecular Packing in Methylcellulose Aqueous Solutions Using Multiscale Modeling and Simulations.

We present a multiscale molecular dynamics (MD) simulation study on self-assembly in methylcellulose (MC) aqueous solutions. First, using MD simulations with a new coarse-grained (CG) model of MC chains in implicit water, we establish how the MC chains self-assemble to form fibrils and fibrillar networks and elucidate the MC chains' packing within the assembled fibrils. The CG model for MC is extended from a previously developed model for unsubstituted cellulose and captures the directionality of H-bonding interactions between the -OH groups. The choice and placement of the CG beads within each monomer facilitates explicit modeling of the exact degree and position of methoxy substitutions in the monomers along the MC chain. CG MD simulations show that with increasing hydrophobic effect and/or increasing H-bonding strength, the commercial MC chains (with degree of methoxy substitution, DS, ∼1.8) assemble from a random dispersed configuration into fibrils. The assembled fibrils exhibit consistent fibril diameters regardless of the molecular weight and concentration of MC chains, in agreement with past experiments. Most MC chains' axes are aligned with the fibril axis, and some MC chains exhibit twisted conformations in the fibril. To understand the molecular driving force for the twist, we conduct atomistic simulations of MC chains preassembled in fibrils (without any chain twists) in explicit water at 300 and 348 K. These atomistic simulations also show that at DS = 1.8, MC chains adopt twisted conformations, with these twists being more prominent at higher temperatures, likely as a result of shielding of hydrophobic methyl groups from water. For MC chains with varying DS, at 348 K, atomistic simulations show a nonmonotonic effect of DS on water-monomer contacts. For 0.0 < DS < 0.6, the MC monomers have more water contacts than at DS = 0.0 or DS > 0.6, suggesting that with few methoxy substitutions, the MC chains are effectively hydrophilic, letting the water molecules diffuse into the fibril to participate in H-bonds with the MC chains' remaining -OH groups. At DS > 0.6, the MC monomers become increasingly hydrophobic, as seen by decreasing water contacts around each monomer. We conclude based on the atomistic observations that MC chains with lower degrees of substitutions (DS ≤ 0.6) should exhibit solubility in water over broader temperature ranges than DS ∼ 1.8 chains.

Cytotoxic Staphylococcus aureus PSMα3 inhibits the aggregation of human insulin in vitro.

Phenol-soluble modulins (PSMs) are extracellular short amphipathic peptides secreted by the bacteria Staphylococcus aureus (S. aureus). They play an essential role in the bacterial lifecycle, biofilm formation, and stabilisation. From the PSM family, PSMα3 has been of special interest recently due to its cytotoxicity and highly stable α-helical conformation, which also remains in its amyloid fibrils. In particular, PSMα3 fibrils were shown to be composed of self-associating "sheets" of α-helices oriented perpendicular to the fibril axis, mimicking the architecture of canonical cross-β fibrils. Therefore, they were called cross-α-fibrils. PSMα3 was synthesised and verified for identity with wild-type sequences (S. aureus). Then, using several experimental techniques, we evaluated its propensity for in vitro aggregation. According to our findings, synthetic PSMα3 (which lacks the N-terminal formyl groups found in bacteria) does not form amyloid fibrils and maintains α-helical conformation in a soluble monomeric form for several days of incubation. We also evaluated the influence of PSMα3 on human insulin fibrillation in vitro, using a variety of experimental approaches in combination with computational molecular studies. First, it was shown that PSMα3 drastically inhibits the fibrillation of human insulin. The anti-fibrillation effect of PSMα3 was concentration-dependent and required a concentration ratio of PSMα3: insulin equal to or above 1 : 100. Molecular modelling revealed that PSMα3 most likely inhibits the production of insulin primary nuclei by competing for residues involved in its dimerization.

Determining the nanostructure and main axis of gly-his-gly fibrils using the amide I’ bands in FTIR, VCD, and Raman spectra

The zwitterionic tripeptide glycyl-histidine-glycine (GHG) has been shown to self-assemble into visible crystalline fibrils that form a gel-supporting network with a very high storage modulus. Here we elaborate on the theory and experimental setup behind our novel approach employed to determining the main fibril axis for these gel-forming fibrils by simulating the amide I band profile for infrared absorption (IR), vibrational circular dichroism (VCD), and visible Raman scattering. We also highlight that combining these three vibrational spectroscopies can help in validating structures that are solved using powder x-ray diffraction analysis (PXRD). The PXRD analysis yielded a GHG fibril unit cell with P21 symmetry containing two peptide monomers and two water molecules. The monomers adopt a conformation reminiscent of the distorted polyproline II conformation obtained for tri-lysine in aqueous solution. Stabilization occurs primarily through peptide-peptide intermolecular hydrogen bond interactions, while the role of water in peptide hydration is minimal. The comparison of simulated and experimental amide I’ band profiles suggests that the xz plane of the crystal unit cell is being predominantly probed in the experimental IR and VCD spectra, with the x axis of the unit cell pointing in the direction of the main fibril axis. The monomer peptide in the unit cell interacts with six adjacent peptides forming hydrophobic channels by edge-to-face and parallel-displaced ππstacking in the y direction. These cores are further stabilized by a plethora of intermolecular interactions in the x and z directions. Our result suggests that the hydrophobic xz-surfaces would be a good target for the adsorption of hydrophobic drugs.

Synthesis and biological evaluation of indane-based fluorescent probes for detection of amyloid-β aggregates in Alzheimer’s disease

In this article, the development of fluorescent imaging probes for the detection of Alzheimer's disease (AD)-associated protein aggregates is described. Indane derivatives with a donor-π-acceptor (D-π-A) structure were designed and synthesized. The probes were evaluated for their ability to bind to β-amyloid (Aβ) protein aggregates, which are a key pathological hallmark of AD. The results showed that several probes exhibited significant changes in fluorescence intensity at wavelengths greater than 600 nm when they were bound to Aβ aggregates compared to the Aβ monomeric form. Among the tested probes, four D-π-A type indane derivatives showed promising binding selectivity to Aβ aggregates over non-specific proteins such as bovine serum albumin (BSA). The molecular docking study showed that our compounds were appropriately located along the Aβ fibril axis through the hydrophobic tunnel structure. Further analysis revealed that the most active compound having dimethylaminopyridyl group as an election donor and dicyano group as an electron acceptor could effectively stain Aβ plaques in brain tissue samples from AD transgenic mice. These findings suggest that our indane-based compounds have the potential to serve as fluorescent probes for the detection and monitoring of Aβ aggregation in AD.

Molecular Dynamics of Drying-Induced Structural Transformations in a Single Nanocellulose.

Nanocellulose is attracting attention in the field of materials science as a sustainable building block. Nanocellulose-based materials, such as films, membranes, and foams, are fabricated by drying colloidal dispersions. However, little is known about how the structure of a single nanocellulose changes during the complex drying process. Here, all-atom molecular dynamics simulations and atomic force microscopy is used to investigate the structural dynamics of single nanocellulose during drying. It is found that the twist morphology of the nanocellulose became localized along the fibril axis during the final stage of the drying process. Moreover, it is shown that conformational changes at C6 hydroxymethyl groups and glycoside bond is accompanied by the twist localization, indicating that the increase in the crystallinity occurred in the process. It is expected that the results will provide molecular insights into nanocellulose structures in material processing, which is helpful for the design of materials with advanced functionalities.

Effects of charge residues on α-synuclein fibril formation.

α-Synuclein (α-syn) amyloid fibrils are associated with Parkinson's disease (PD), multiple system atrophy, and dementia with Lewy bodies. α-Syn fibrils derived from ex vivo patient materials as well as those formed in vitro adopt an array of structures or polymorphs. It is important to delineate the structure-function relationship of fibril polymorphs and the mechanisms that give rise to these molecular differences. In particular, salt bridges between Lys and Glu residues are widely observed in all α-syn fibril structures to date. On the one hand, this is not surprising given the preponderance of Lys (14) and Glu (17) residues in its 140 amino acid long sequence; but, because of their large numbers, it is cumbersome and challenging to identify key residues that modulate fibril formation. Here, we performed studies using a smaller PD-related N-terminally truncated α-syn variant, composed of residues 66‒140 (ΔN1-65), that forms amyloid fibrils. Within the proteolytic-resistant core, the number of charged residues reduces to 4 Lys, 4 Glu, and 1 Asp, which is tractable for alanine substitutions to determine their effects. Using atomic force microscopy (AFM) and transmission electron microscopy, we show that fibril structure is strongly impacted by charge neutralization. For example, while ΔN1-65 formed predominantly paired twisted protofilaments with uniform helical periodicity, E83A formed only paired straight fibrils, whereas K80A displayed both twisted and straight fibrils. Interestingly, different heights were seen by AFM for K80A. Of note, structural complexity within a single fibril was revealed in K96A/K97A, where varying helical periodicities were measured along the fibril axis. In conclusion, these results on ΔN1-65 offer residue-specific insights and bolster the importance of electrostatic interactions in fibril formation, which is also involved in the full-length protein.

Fast polarization-sensitive second-harmonic generation microscopy based on off-axis interferometry.

We propose polarization-sensitive second-harmonic generation microscopy based on off-axis interferometry (OI-PSHG) by recording the complex field of a wide-field second-harmonic generation (SHG) image and performing polarization measurements. With the ability to record the SHG signals associated with different positions simultaneously, the proposed method exhibits a higher imaging frame rate than raster scanning-based SHG microscopy. The molecular orientation (in terms of their symmetric axis) of tendon collagen fibrils and myosin in muscle is resolved in three dimensions from a subset of polarization-resolved SHG holograms. With the present configuration, it takes approximately 0.01 s to acquire an image with 128 × 128 pixels, which is mainly limited by the excitation power density for wide-field illumination. For the same data throughput using pixel-by-pixel scanning, 0.16-s-long acquisition is required, with the pixel dwell time of 10 µs. Offering the ability to perform wide-field imaging and polarization measurements, the present work lays the foundation for fast SHG microscopy using complex deconvolution and harmonic tomography.

Small-angle X-ray microdiffraction from fibrils embedded in tissue thin sections.

Small-angle X-ray scattering (SAXS) from fibrils embedded in a fixed, thin section of tissue includes contributions from the fibrils, the polymeric matrix surrounding the fibrils, other constituents of the tissue, and cross-terms due to the spatial correlation between fibrils and neighboring molecules. This complex mixture severely limits the amount of information that can be extracted from scattering studies. However, availability of micro- and nano-beams has made the measurement of scattering from very small volumes possible, which, in some cases, may be dominated by a single fibrillar constituent. In such cases, information about the predominant species may be accessible. Nevertheless, even in these cases, the correlations between the positions of fibrils and other constituents have a significant impact on the observed scattering. Here, strategies are proposed to extract partial information about fibril structure and tissue organization on the basis of SAXS from samples of this type. It is shown that the spatial correlation function of the fibril in the direction perpendicular to the fibril axis can be computed and contains information about the predominant fibril structure and the organization of the surrounding tissue matrix. This has significant advantages over approaches based on techniques developed for X-ray solution scattering. Examples of correlation calculations in different types of samples are given to demonstrate the information that can be obtained from these measurements.

Direct Phasing of Coiled-Coil Protein Crystals

Coiled-coil proteins consisting of multiple copies of helices take part in transmembrane transportation and oligomerization, and are used for drug delivery. Cross-alpha amyloid-like coiled-coil structures, in which tens of short helices align perpendicular to the fibril axis, often resist molecular replacement due to the uncertainty to position each helix. Eight coiled-coil structures already solved and posted in the protein data bank are reconstructed ab initio to demonstrate the direct phasing results. Non-crystallographic symmetry and intermediate-resolution diffraction data are considered for direct phasing. The retrieved phases have a mean phase error around 30∼40°. The calculated density map is ready for model building, and the reconstructed model agrees with the deposited structure. The results indicate that direct phasing is an efficient approach to construct the protein envelope from scratch, build each helix without model bias which is also used to confirm the prediction of AlphaFold and RosettaFold, and solve the whole structure of coiled-coil proteins.

Forbidden Secondary Structures Found in Gel-Forming Fibrils of Glycylphenylalanylglycine.

The zwitterionic l-tripeptide glycylphenylalanylglycine self-assembles into very long crystalline fibrils in an aqueous solution, which causes the formation of an exceptionally strong gel phase (G' ∼ 5 × 106 Pa). The Rietveld refinement analysis of its powder X-ray diffraction (PXRD) pattern reveals a unit cell with four peptides forming a P212121 space group and adopting an inverse polyproline II conformation, that is, a right-handed helical structure that occupies the "forbidden" region of the Ramachandran plot. This unusual structure is stabilized by a plethora of intermolecular interactions facilitated by the large number of different functional groups of the unblocked tripeptide. Comparisons of simulated and experimental Fourier transform infrared and vibrational circular dichroism (VCD) amide I' profiles corroborate the PXRD structure. Our experimental setup reduces the sample to a quasi-two-dimensional network of fibrils. We exploited the influence of this reduced dimensionality on the amide I VCD to identify the main fibril axis. We demonstrate that PXRD, vibrational spectroscopy, and amide I simulations provide a powerful toolset for secondary structure and fibril axis determination.

The Possible Mechanism of Amyloid Transformation Based on the Geometrical Parameters of Early-Stage Intermediate in Silico Model for Protein Folding.

The specificity of the available experimentally determined structures of amyloid forms is expressed primarily by the two- and not three-dimensional forms of a single polypeptide chain. Such a flat structure is possible due to the β structure, which occurs predominantly. The stabilization of the fibril in this structure is achieved due to the presence of the numerous hydrogen bonds between the adjacent chains. Together with the different forms of twists created by the single R- or L-handed α-helices, they form the hydrogen bond network. The specificity of the arrangement of these hydrogen bonds lies in their joint orientation in a system perpendicular to the plane formed by the chain and parallel to the fibril axis. The present work proposes the possible mechanism for obtaining such a structure based on the geometric characterization of the polypeptide chain constituting the basis of our early intermediate model for protein folding introduced formerly. This model, being the conformational subspace of Ramachandran plot (the ellipse path), was developed on the basis of the backbone conformation, with the side-chain interactions excluded. Our proposal is also based on the results from molecular dynamics available in the literature leading to the unfolding of α-helical sections, resulting in the β-structural forms. Both techniques used provide a similar suggestion in a search for a mechanism of conformational changes leading to a formation of the amyloid form. The potential mechanism of amyloid transformation is presented here using the fragment of the transthyretin as well as amyloid Aβ.

Van der Waals Exfoliation Processed Biopiezoelectric Submucosa Ultrathin Films.

Piezoelectric biomaterials have attracted significant attention due to the potential effect of piezoelectricity on biological tissues and their versatile applications. However, the high cost and complexity of assembling and domain aligning biomolecules at a large scale, and the disordered arrangement of piezoelectric domains as well as the lack of ferroelectricity in natural biological tissues remain a roadblock toward practical applications. Here, utilizing the weak van der Waals interaction in the layered structure of small intestinal submucosa (SIS), a van der Waals exfoliation (vdWE) process is reported to fabricate ultrathin films down to the thickness of the effective piezoelectric domain. Based on that, the piezoelectric property is revealed of SIS stemming from the collagen fibril, with piezoelectric coefficients up to 4.1 pm V-1 and in-plane polarization orientation parallel to the fibril axis. Furthermore, a biosensor based on the vdWE-processed SIS film with an in-plane electrode is demonstrated that produces open-circuit voltages of ≈250mV under the cantilever vibration condition. The vdWE method shows great potential in facilely fabricating ultrathin films of soft tissues and biosensors.

Cryo-EM structure of RNA-induced tau fibrils reveals a small C-terminal core that may nucleate fibril formation

In neurodegenerative diseases including Alzheimer’s and amyotrophic lateral sclerosis, proteins that bind RNA are found in aggregated forms in autopsied brains. Evidence suggests that RNA aids nucleation of these pathological aggregates; however, the mechanism has not been investigated at the level of atomic structure. Here, we present the 3.4-Å resolution structure of fibrils of full-length recombinant tau protein in the presence of RNA, determined by electron cryomicroscopy (cryo-EM). The structure reveals the familiar in-register cross-β amyloid scaffold but with a small fibril core spanning residues Glu391 to Ala426, a region disordered in the fuzzy coat in all previously studied tau polymorphs. RNA is bound on the fibril surface to the positively charged residues Arg406 and His407 and runs parallel to the fibril axis. The fibrils dissolve when RNase is added, showing that RNA is necessary for fibril integrity. While this structure cannot exist simultaneously with the tau fibril structures extracted from patients’ brains, it could conceivably account for the nucleating effects of RNA cofactors followed by remodeling as fibrils mature.

Comparison of Synthetic vs. Biogenic Polymeric Process-Directing Agents for Intrafibrillar Mineralization of Collagen.

With the aging population, there is a growing need for mineralized tissue restoration and synthetic bone substitutes. Previous studies have shown that a polymer-induced liquid-precursor (PILP) process can successfully mineralize collagen substrates to achieve compositions found in native bone and dentin. This process also leads to intrafibrillar apatitic crystals with their [001] axes aligned roughly parallel to the long axis of the collagen fibril, emulating the nanostructural organization found in native bone and dentin. When demineralized bovine bone was remineralized via the PILP process using osteopontin (OPN), the samples were able to activate mouse marrow-derived osteoclasts to similar levels to those of native bone, suggesting a means for fabricating bioactive bone substitutes that could trigger remodeling through the native bone multicellular unit (BMU). In order to determine if OPN derived from bovine milk could be a cost-effective process-directing agent, the mineralization of type I collagen scaffolds using this protein was compared to the benchmark polypeptide of polyaspartic acid (sodium salt; pAsp). In this set of experiments, we found that OPN led to much faster and more uniform mineralization when compared with pAsp, making it a cheaper and commercially attractive alternative for mineralized tissue restorations.