Aurophilic Contacts Research Articles

Crystal structures of four gold(I) complexes [AuL 2]+[AuX 2]- and a by-product (L·LH+)[AuBr2]- (L = substituted pyridine, X = Cl or Br).

Bis(2-methyl-pyridine)-gold(I) di-bromido-aurate(I), [Au(C6H7N)2][AuBr2], (1), crystallizes in space group C2/c with Z = 4. Both gold atoms lie on twofold axes and are connected by an aurophilic contact. A second aurophilic contact leads to infinite chains of alternating cations and anions parallel to the b axis, and the residues are further connected by a short H⋯Au contact and a borderline Br⋯Br contact. Bis(3-methyl-pyridine)-gold(I) di-bromido-aurate(I), [Au(C6H7N)2][AuBr2], (2), crystallizes in space group C2/m with Z = 2. Both gold atoms lie on special positions with symmetry 2/m and are connected by an aurophilic contact; all other atoms except for one methyl hydrogen lie in mirror planes. The extended structure is closely analogous to that of 1, although the structures are formally not isotypic. Bis(3,5-di-methyl-pyridine)-gold(I) di-chlor-ido-aurate(I), [Au(C7H9N)2][AuCl2], (3) crystallizes in space group P with Z = 2. The cation lies on a general position, and there are two independent anions in which the gold atoms lie on inversion centres. The cation and one anion associate via three short H⋯Cl contacts to form a ribbon structure parallel to the b axis; aurophilic contacts link adjacent ribbons. Bis(3,5-di-methyl-pyridine)-gold(I) di-bromido-aurate(I), [Au(C7H9N)2][AuBr2], (4) is isotypic to 3. Attempts to make similar compounds involving 2-bromo-pyridine led instead to 2-bromopyridinium di-bromido-aurate(I)-2-bromo-pyridine (1/1), (C5H5BrN)[AuBr2]·C5H4BrN, (5), which crystallizes in space group P with Z = 2; all atoms lie on general positions. The 2-bromo-pyridinium cation is linked to the 2-bromo-pyridine mol-ecule by an N-H⋯N hydrogen bond. Two formula units aggregate to form inversion-symmetric dimers involving Br⋯Br, Au⋯Br and H⋯Br contacts.

Structures and growth pathways of AunCln+3- (n ≤ 7) cluster anions.

Gold chloride clusters play an important role in catalysis and materials chemistry. Due to the diversity of their species and isomers, there is still a dearth of structural studies at the molecular level. In this work, anions of AunCln+3 - and AunCln+5 - (n = 2-4) clusters were obtained by laser desorption/ionization mass spectrometry (LDI MS), and the most stable isomers of AunCln+3 - were determined after a thorough search and optimization at the TPSSh/aug-cc-pVTZ/ECP60MDF level. The results indicate that all isomers with the lowest energy have a planar zigzag skeleton. In each species, there is one Au(III) atom at the edge connected with four Cl atoms, which sets it from the other Au(I) atoms. Four growth pathways for AunCln+3 - (n = 2-7) clusters are proposed (labelled R1, R2, R3 and R4). They are all associated with an aurophilic contact and are exothermic. The binding energies tend to stabilize at ∼ -41kcal/mol when the size of the cluster increases in all pathways. The pathway R1, which connects all the most stable isomers of the respective clusters, is characterized by cluster growth due to aurophilic interactions at the terminal atom of Au(I) in the zigzag chains. In the pathway of R4 involving Au-Au bonding in its initial structures (n ≤ 3), the distance between intermediate gold atoms grows with cluster size, ultimately resulting in the transfer of the intermediate Au-Au bonding into aurophilic interaction. The size effect on the structure and aurophilic interactions of these clusters will be better understood based on these discoveries, potentially providing new insights into the active but elusive chemical species involved in the corresponding catalytic reactions or nanoparticle synthesis processes.

Synthesis and characterization of bis[(dimethylphosphanylethynyl)dimethylsilyl]methane-digold(I) dichloride

Abstract The reaction of chlorodimethylphosphane with dilithiated bis(ethynyldimethylsilyl)methane leads to the corresponding bis[(dimethylphosphanylethynyl)dimethylsilyl]methane (1) which reacts readily with chloroauric acid in the presence of a reductant to form its dinuclear chlorogold(I) complex (2). The terminal chloride units of this compound can be substituted by reaction with nucleophiles. Furthermore, the metallophilic host functionality of the dinuclear complex 2 towards metallophilic atoms such as copper, silver, and thallium was tested. The crystal structure of bis[(dimethylphosphanylethynyl)dimethylsilyl]methane-digold(I) dichloride (2) is presented, which shows chains of the molecules aggregated by intermolecular aurophilic contacts.

Crystal structures of five halido gold complexes involving piperidine or pyrrolidine as ligands or (protonated) as cations.

In bromido-(pyrrolidine-κN)gold(I) bis-(pyrrolidine-κN)gold(I) bromide, [AuBr(pyr)]·[Au(pyr)2]Br (pyr = pyrrolidine, C4H9N), 2, alternating [AuBr(pyr)] mol-ecules and [Au(pyr)2]+ cations are connected by aurophilic contacts to form infinite chains of residues parallel to the b axis. The chains are cross-linked by three N-H⋯Br- hydrogen bonds and an Au⋯Br contact to form a layer structure parallel to the ab plane. Tri-chlorido-(piperidine-κN)gold(III), [AuCl3(pip)] (pip = piperidine, C5H11N), 3, consists of mol-ecules with the expected square-planar coordination at the gold atom, which are connected by an N-H⋯Cl hydrogen bond and an Au⋯Cl contact to form a layer structure parallel to the ac plane. The structures of bis-(piperidinium) tetra-chlorido-aurate(III) chloride, (pipH)2[AuCl4]Cl, 4, and bis-(pyrrolidinium) tetra-bromido-aurate(III) bromide, (pyrH)2[AuBr4]Br, 6, are closely related but not isotypic. Compound 6 crystallizes in space group Ibam; the Au and two Br atoms of the anion lie in the mirror plane x, y, 0, whereas the bromide ions occupy special positions 0, 0.5, 0 and 0, 0.5, 0.25, with site symmetry 2/m. The NH2 group forms a hydrogen bond to one bromide ion, and also a three-centre hydrogen bond to the other bromide atom and to a metal-bonded Br atom. The packing involves chains of hydrogen-bonded pyrrolidinium and bromide ions parallel to the c axis, combined with a layer structure of [AuBr4]- and bromide anions, parallel to the ab plane and involving Au⋯Br and Br⋯Br contacts. Compound 4, however, crystallizes pseudosymmetrically in space group Iba2; two chlorine atoms of the anion lie on the twofold axis 0.5, 0.5, z, and there are two independent cations. The packing is closely similar to that of 6, but there are no N-H⋯Cl hydrogen bonds to metal-bonded chlorines. The contact distances Au⋯Cl are appreciably longer than their Au⋯Br counterparts in 6, whereas the Cl⋯Cl contact is much shorter than Br⋯Br in 6. Tri-bromido-(piperidine-κN)gold(III) crystallizes as its di-chloro-methane solvate, [AuBr3(pip)]·CH2Cl2, 7. It too displays a square-planar coordination at the gold atom. The packing involves hydrogen bonds N-H⋯Br, stacking of neighbouring AuBr3 units by Au⋯Br contacts, and a short Br⋯Br contact; these combine to form a layer structure parallel to the ac plane.

Spontaneous Water-Promoted Self-Aggregation of a Hydrophilic Gold(I) Complex Due to Ligand Sphere Rearrangement.

Aggregating gold(I) complexes in solution through short aurophilic contacts promotes new photoluminescent deactivation pathways (aggregation-induced emission, AIE). The time dependence of spontaneous AIE is seldom studied. We examine the behavior of complex [Au(N9-hypoxanthinate)(PTA)] (1) in an aqueous solution with the aid of variable-temperature NMR, time-resolved UV-Vis and photoluminescence spectroscopy, and PGSE NMR. The studies suggest that partial ligand scrambling in favor of the ionic [Au(PTA)2][Au(N9-hypoxanthinate)2] pair followed by anion oligomerization takes place. The results are rationalized with the aid of computational calculations at the TD-DFT level of theory and IRI analysis of the electron density.

Hydrogen Bonding, π-Stacking, and Aurophilic Interactions in Two Dicyanoaurate(I)-based Manganese(II) Complexes with Auxiliary Bis-Pyridine Ligands.

The relevance of hydrogen-bonding, π-π stacking and aurophilic interactions in the solid-state of two new heterobimetallic (AuI-MnII) complexes is analyzed in this manuscript. They are discrete complexes of formulae [Mn(bipy)2(H2O){Au(CN)2}][Au(CN)2] and [Mn(dmbipy)2{Au(CN)2}]·H2O, (bipy = 2,2'-bipyridine and dmbipy = 5,5'-dimethyl-2,2'-bipyridine), which are based on dicyanidoaurate(I) groups and 2,2'-bipyridyl-like co-ligands. They have been synthesized in good yields and X-ray characterized. In both compounds, aurophilic, OH···N hydrogen bonding and π-π interactions governed the supramolecular assemblies in the solid state. These contacts with special emphasis on the aurophilic interactions have been studied using density functional theory calculations and characterized using the quantum theory of atoms-in-molecules and the noncovalent interaction plot. The aurophilic contacts have been also rationalized from an orbital point of view using the natural bond orbital methodology, evidencing stabilization energies up to 5.7 kcal/mol. Moreover, the interaction energies have been decomposed using the Kitaura-Morokuma energy decomposition analysis, confirming the importance of electrostatic and orbital effects.

Crystal structures of five gold(I) complexes with methylpiperidine ligands

In bis(4-methylpiperidine-κN)gold(I) chloride, [Au(C6H13N)2]Cl (1), the methyl groups are, as expected, equatorial at the piperidine ring, but the Au atom is axial; this is the case for all five structures reported here, as is the expected linear coordination at the Au atom. Hydrogen bonding of the form N—H...Cl−...H—N leads to inversion-symmetric dimers, which are further connected by C—H...Au contacts. Bis(4-methylpiperidine-κN)gold(I) dichloridoaurate(I), [Au(C6H13N)2][AuCl2] (2), also forms inversion-symmetric dimers; these involve aurophilic interactions and three-centre hydrogen bonds of the form NH(...Cl)2. Bis(4-methylpiperidine-κN)gold(I) dibromidoaurate(I), [Au(C6H13N)2][AuBr2] (3), is isotypic to 2. The 1:1 adduct chlorido(4-methylpiperidine-κN)gold(I) bis(4-methylpiperidine-κN)gold(I) chloride, [Au(C6H13N)2]Cl·[AuCl(C6H13N)] (4), crystallizes as its dichloromethane solvate. The asymmetric unit contains two formula units, in each of which the chloride anion accepts a hydrogen bond from the cation and from the neutral molecule, and the two Au atoms are linked via an aurophilic interaction. A further hydrogen bond leads to inversion-symmetric dimers. The asymmetric unit of bis(2-methylpiperidine-κN)gold(I) chloride, [Au(C6H13N)2]Cl (5), contains two `half' cations, in which the Au atoms lie on twofold axes, and a chloride ion on a general position. Within each cation, the relative configurations at the atoms N and C2 (which bears the methyl substituent) are R,S. The twofold-symmetric dimer involves two N—H...Cl−...H—N units and an aurophilic contact between the two Au atoms.

Методы синтеза, строение и применение ди-, тетра- и дигалогендицианоауратов металлов

Cyanoaurate complexes are a wide class of compounds with diverse structures. In particular, coordination polymers based on them have many potential practical applications, including such fields as microelectronics, nanotechnology, materials science, and medicine. In addition, when new functional materials are developed, considerable attention is paid to the possibility of participation of molecules and other structural units in non-covalent interactions, which play an important role in determining the physicochemical properties, as well as the biological activity of these materials. Thus, the presence of aurophilic contacts or halogen-halogen bonds in cyanoaurate complexes only fuels the researchers' interest in this class of compounds. Nowadays, the chemistry of gold cyanides continues to develop rapidly, so synthesis and study of new cyanoaurate compounds, as well as systematization of the acquired knowledge, remain important objectives. The present review, which includes the description of modern advances in the field of synthesis methods, study of structural features and possibility of practical use of metal di , tetra- and dihalodicyanoaurates of molecular and ionic types, is based on an analysis of the literature sources, most of which were published before 2022. Some later works are also mentioned in the review. The information presented in the article is of a fundamental nature and is undoubtedly important for specialists in the field of inorganic and organometallic chemistry of gold. The bibliography consists of 232 references.

Intra- vs Intermolecular Aurophilic Contacts in Dinuclear Gold(I) Compounds: Impact on the Population of the Triplet Excited State

Two series of dinuclear gold(I) complexes that contain two Au-chromophore units (chromophore = dibenzofurane or dimethylfluorene) connected through a diphosphane bridge that differs in the flexibility and length (diphosphane = dppb for 1,4-bis(diphenylphosphino)butane, DPEphos for bis[(2-diphenylphosphino)phenyl]ether, xanthphos for 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, and BiPheP for 2,2'-bis(diphenylphosphino)-1,1'-biphenyl) have been synthesized and structurally characterized. Their photophysical properties have been carefully investigated, paying attention to the role of the presence, or absence, of aurophilic contacts and their nature (intra- or intermolecular character). This analysis was permitted due to the X-ray crystallographic determination of all of the structures of the compounds discussed herein. The quantum yields of the triplet population, ϕT, have been calculated by nanosecond-laser flash photolysis measurements, and we could determine the main role of the character of the aurophilic contacts in the resulting ϕT, being especially favored in the presence of intermolecular contacts. Time-dependent density functional theory (TD-DFT) calculations support the absorption and emission assignments and the shorter distance between S1 and the closest triplet excited state energy in the case of the compounds with a higher triplet-state population.

Aurophilic Interactions in Cationic Three-Coordinate Gold(I) Bipyridyl/Isocyanide Complex

Gold(I) isocyanide complexes featuring Au···Au interactions attract considerable attention because of their tunable photophysical properties. Although the synthetic exploration of isocyanide gold(I) complexes seems reasonable, their structural diversity is mainly limited to linear gold(I) derivatives. The synthesis and structural characterization of cationic three-coordinate gold(I) mixed 2,2′-bipyridyl/isocyanide complex are presented here for the first time. Cationic gold species form supramolecular dimers in the solid state via attractive Au···Au interactions. The nature and energies of aurophilic contacts, which are responsible for dimerization in the solid state, were studied by DFT calculations together with QTAIM, ELF, RDG, and NCI techniques and Hirshfeld surface analysis. The estimated energy of the aurophilic interactions was 6.3 kcal/mol.

Directing the Crystal Packing in Triphenylphosphine Gold(I) Thiolates by Ligand Fluorination.

We explore herein the supramolecular interactions that control the crystalline packing in a series of fluorothiolate triphenylphosphine gold(I) compounds with the general formula [Au(SRF)(Ph3P)] in which Ph3P = triphenylphosphine and SRF = SC6F5, SC6HF4-4, SC6F4(CF3)-4, SC6H3F2-2,4, SC6H3F2-3,4, SC6H3F2-3,5, SC6H4(CF3)-2, SC6H4F-2, SC6H4F-3, SC6H4F-4, SCF3, and SCH2CF3. We use for this purpose (i) DFT electronic structure calculations and (ii) the quantum theory of atoms in molecules and the non-covalent interactions index methods of wave function analyses. Our combined experimental and computational approach yields a general understanding of the effects of ligand fluorination in the crystalline self-assembly of the examined systems, in particular, about the relative force of aurophilic contacts compared with other supramolecular interactions. We expect this information to be useful in the design of materials based on gold coordination compounds.

Excimer and Exciplex Formation in Gold(I) Complexes Preconditioned by Aurophilic Interactions.

Excimers and exciplexes are defined as assemblies of atoms or molecules A/A′ where interatomic/intermolecular bonding appears only in excited states such as [A 2]* (for excimers) and [AA′]* (for exciplexes). Their formation has become widely known because of their role in gas‐phase laser technologies, but their significance in general chemistry terms has been given little attention. Recent investigations in gold chemistry have opened up a new field of excimer and exciplex chemistry that relies largely on the preorganization of gold(I) compounds (electronic configuration AuI(5d10)) through aurophilic contacts. In the corresponding excimers, a new type of Au⋅⋅⋅Au bonding arises, with bond energies and lengths approaching those of ground‐state Au−Au bonds between metal atoms in the Au0(5d106s1) and AuII(5d9) configurations. Excimer formation gives rise to a broad range of photophysical effects, for which some of the relaxation dynamics have recently been clarified. Excimers have also been shown to play an important role in photoredox binuclear gold catalysis.

Supramolecular assemblies and photophysical properties of ionic homo- and heteronuclear metallophilic complexes

The synthesis of two dinuclear ionic complexes with chemical formula [Au(PR3)2][Au(C≡CC5H4N-4)2] that contain the water soluble phosphines, PR3, PTA (1, 3,5-triaza-7-phosphaadamantane, 1) and DAPTA (3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane, 2) is herein described. The differences on their intermolecular reorganization have been analyzed and compared with the previously reported for the neutral complexes [Au(PR3)(C≡CC5H4N-4)]. It has been evidenced that the reorganization of the ligands giving rise to the dinuclear ionic complexes produces a complete change in the properties giving rise to Au⋯Au intermolecular assemblies. These aurophilic contacts are the responsible for the resulting luminescence which is not displayed for the parent compounds [Au(PR3)2]Cl and [PPh4][Au(C≡CC5H4N-4)2].Compounds 1 and 2 were made react with three different silver salts (nitrate, triflate and hexafluorophosphate) giving rise to 1:1 heterometallic assemblies with some changes both on the wavelength and emission intensity.

Aurophilicity in action: stepwise formation of dinuclear Au(i) macrocycles with rigid 1,8-dialkynylanthracenes.

Two phosphane-gold(i) functions (with tri(para-tolyl)- or tri-n-butylphosphane) were attached to a 1,8-diethynylanthracene backbone. The ligand size prevents direct interaction between the gold atoms, but the initial products rearrange to form macrocyclic anions comprising two 1,8-diethynylanthracene and two gold units, linked to cationic gold(i) fragments by maximising aurophilic interactions.

Aminkomplexe des Goldes, Teil 11a: Strukturen zweier (Methylamin)gold(I)-Komplexe

Abstract The first methylamine complexes of gold are reported. Both crystallize in chiral trigonal space groups. In bis(methylamine)gold(I) chloride [(CH3NH2)2Au]+ Cl−, the gold and chlorine atoms lie on twofold axes in space group P3121. The packing is largely determined by two hydrogen bonds of the form N–H···Cl, which combine to form chains of rings, the latter with graph set R 4 2 ( 12 ) . ${\rm{R}}_4^2(12).$ Aurophilic interactions are at best borderline [Au···Au 3.9014(2) Å]. Cyano(methylamine)gold(I), (CH3NH2)AuCN crystallizes in space group P31; the molecules are connected by short aurophilic contacts [Au···Au 3.1507(2) Å] to form spiral chains parallel to the c axis, and also by two hydrogen bonds of the form N–H···N≡C.

Strukturen zweier Salze des Bis(thioharnstoff)gold(I)-Kations

AbstractAttempts to isolate the compound (tu2Au)SCN1(tu=thiourea), first reported in 1949, at first led to [(tu)2Au]2SO4·CH3OH2after crystallization from methanol-petroleum ether. Crystallization from isopropanol led to the required compound1. The crystal structure analysis of1confirmed its ionic nature, (tu2Au)+SCN−. The tu ligands are mutuallytrans(torsion angle C–S···S–C 175.4(2)°), and the entire cation is approximately planar (r.m.s. deviation 0.08 Å). Eight classical hydrogen bonds connect the residues to form layers parallel to thebcplane atx≈⅛, ⅜, ⅝ and ⅞; the layers are connected by aurophilic contacts, which link the cations to form chains parallel to theaaxis. In the structure of compound2the S=C groups are synclinal to each other; two NH2groups are connected via a bifurcated hydrogen bonding system to a sulfate oxygen, forming a ring of graph setR21(10).${\rm{R}}_2^1(10).$In a complex three-dimensional packing, the cations are connected by various interactions to form layers parallel to theacplane aty≈½, whereas the sulfates are the centres of hydrogen-bonded double layers on both sides of the mirror plane aty≈¾. The structure contains a convincing example of a hydrogen bond to a gold centre.

Cooperative Au(I)···Au(I) Interactions and Hydrogen Bonding as Origin of a Luminescent Adeninate Hydrogel Formed by Ultrathin Molecular Nanowires.

Two water-soluble [Au(9 N-adeninate)(PR3)] complexes (PR3 = PMe3 (1); PTA (3)) were synthesized by the coordination of the respective cationic [Au(PR3)]+ fragment to the 9 N position of the adeninate anion. Both complexes crystallize as dimers by aurophilic contacts of 3.2081(6) Å in 1 and 3.0942(7) and 3.0969(7) Å in 3, but different packings are observed due to the crystallizing solvent choice and the nature of the ancillary phosphine ligand. At this regard, different supramolecular behavior is observed in water, ranges from the formation of ultrathin nanowires of 5.3 ± 1.9 nm of diameter and up to 1.5 μm in length and leads to a blue-luminescent hydrogel for 1, to the single-crystallization of 3. Parallel computational studies carried out show that aurophilicity and N-H···N or O-H···N hydrogen bonding are comparable in strength, suggesting a competition between all types of weak forces in the final observed macroscopic properties.

Aminkomplexe des Goldes, Teil 10: Gold(I)-thiocyanat-Komplexe mit Tetrahydrothiophen, Dimethylsulfid, Ammoniak, Aminen und Azaaromatena

Abstract The reaction of (tht)AuCl (tht=tetrahydrothiophene) with KSCN leads to a mixture of gold(I) thiocyanate AuSCN and [(tht)2Au]+ [Au(SCN)2]− 1. The compounds were separated and the X-ray structure of 1 confirmed as an alternating chain of anions and cations linked by aurophilic contacts. Either pure AuSCN or the mixture was used to synthesize further derivatives of AuSCN, all of which were investigated by X-ray methods. Most products were of limited stability when removed from their mother liquor. The dimethyl sulfide derivative 2 is molecular, (Me2S)AuSCN; the ammonia derivative 3 is ionic, [(NH3)2Au]+ [Au(SCN)2]−. The reaction with 2,2-bipyridyl leads (presumably by involvement of the solvent or of atmospheric moisture) to [bipy-H]+ [Au(SCN)2]− 13. All other products involve amines or azaaromatics as ligands L. The primary amine tert-butylamine forms an ionic product [L2Au]+ (SCN)− 4. The secondary amines piperidine and dibenzylamine lead to molecular structures LAuSCN (5 and 6), whereas pyridine-based azaaromatics lead to ionic products [L2Au]+ [Au(SCN)2]− with L=2-, 3- or 4-picoline (7–9), 2,4-, 3,4- or 3,5-lutidine (10–12). The 3,4-lutidine derivative 11 forms two polymorphs that tend to form mixed crystals. The dominant features of the crystal packing for 7–12 are short aurophilic interactions.

Luminescence Thermochromism of Gold(I) Phosphane-Iodide Complexes: A Rule or an Exception?

A series of gold(I) iodide complexes 1-11 have been prepared from di-, tri-, and tetraphosphane ligands. Crystallographic studies reveal that the di- (1-7) and tetrametallic (11) compounds feature linearly coordinated gold(I) ions with short aurophilic contacts. Their luminescence behavior is determined by the combined influence of the phosphane properties, metal-metal interaction, and intermolecular lattice-defined interactions. The proposed variable contribution of 3 (X+M)-centered (X=halogen; M=metal) and 3 XLCT (halogen to ligand charge transfer) electronic transitions into the lowest lying excited state, which is influenced by supramolecular packing, is presumably responsible for the alteration of room-temperature emission color from green (λ=545 nm, for 11) to near-IR (λ=698 nm, for 2). Dinuclear compounds 6 and 7 exhibit distinct luminescence thermochromism with a blueshift up to 5750 cm-1 upon cooling. Such dramatic change of emission energy is assigned to the presence of two coupled triplet excited states of 3 ππ* and 3 (X+M)C/3 XLCT nature, the presence of which depends on both molecular structure and the crystal lattice arrangement.

Aminkomplexe des Goldes, Teil 9: Gold(I)-halogenid-Komplexe mit primären und azyklischen sekundären Aminen und ihre Oxidation zu Gold(III)-Derivaten

Abstract The reaction of (tht)AuX (X=Cl or Br; tht=tetrahydrothiophene) with various primary amines L leads to products of the form [L2Au]+X−. Packing diagrams of the corresponding structures are dominated by N–H···X hydrogen bonds and (in some cases) aurophilic contacts. The cyclohexylamine derivative was already known as its dichloromethane ⅔-solvate; we have isolated the solvent-free compound and its pentane ¼-solvate, which all show different packing patterns. With acyclic secondary amines, the products are more varied; LAuX and [L2Au]+[AuX2]− were also found. These gold(I) products were generally formed in satisfactory quantities. The attempted oxidation to Au(III) derivatives with PhICl2 or Br2 proved impossible for the primary amine derivatives [although isopropylamine-trichloridogold(III) was obtained unexpectedly from the corresponding cyanide] and unsatisfactory for the secondary amine derivatives. Products LAuX3 and [L2AuX2]+[AuX4]− were identified but were formed in disappointing yields. In isolated cases protonated products (LH)+[AuCl4]−, (LH+)3[AuCl4]−(Cl−)2 or [(Et2N)2CH]+[AuBr4]− were formed, presumably by involvement of the dichloromethane solvent and/or adventitious water. Here also the yields were poor, and some products arose as mixtures. Direct reaction of amines with AuCl3 or (tht)AuX3 was also unsuccessful. All products were characterized by X-ray structure analysis.