Atomic Spacing Research Articles

A Discovery of Pressure-Induced New Semiconductor Electronic Phase Transitions by DFT Calculations: Introducing a Glimpse of a Novel Semiconductor Family.

This study introduces a discovery of pressure-induced new semiconductor electronic phase transitions. A novel semiconductor family that exhibits pressure-induced nonmonotonic changes in band gaps was found and meets the definition of phase transitions, challenging the traditional understanding of linear and monotonic band gap modification through pressurization. Our findings suggest a complex interplay of atomic spacing and electron orbital contributions under varying pressure conditions, resulting in the variation of band gaps. This behavior, which includes three distinct steps: first, narrowing, second, broadening, and third, narrowing again and ultimately metalizing; some compounds could bypass step 1, has potential applications in piezoelectric and semiconductor technologies. We propose two new semiconductor electronic phase transitions (SEPT) associated with specific inflection points in the pressure-dependent band gap curve. Our results open avenues for further research into the electronic properties of crystals under high pressure, with the ultimate goal of uncovering the more profound physical principles governing these phenomena.

Experimental realization of multiple frequency photoassociation in an optical dipole trap.

The generation of cold molecules is an important topic in the field of cold atoms and molecules and has received relevant advanced research attention in ultracold chemistry, quantum computation, and quantum metrology. With a high atomic phase space density, optical dipole traps have been widely used to prepare, trap, and study cold molecules. In this work, Rb2 molecules were photoassociated in a magneto-optical trap to obtain a precise rovibrational spectrum, which provided accurate numerical references for the realization of multiple frequency photoassociation. By meeting the harsh requirements of photoassociation in optical dipole traps, the cold molecule photoassociation process was well explored, and different photoassociation resonances were simultaneously addressed in a single optical dipole trap. This method can be universally extended to simultaneously photoassociate cold molecules with different internal states or atomic species in a single optical dipole trap, thus advancing generous cold molecule studies such as cold molecule collision dynamics.

Analysis of mapping atomic models to coarse-grained resolution.

Low-resolution coarse-grained (CG) models provide significant computational and conceptual advantages for simulating soft materials. However, the properties of CG models depend quite sensitively upon the mapping, M, that maps each atomic configuration, r, to a CG configuration, R. In particular, M determines how the configurational information of the atomic model is partitioned between the mapped ensemble of CG configurations and the lost ensemble of atomic configurations that map to each R. In this work, we investigate how the mapping partitions the atomic configuration space into CG and intra-site components. We demonstrate that the corresponding coordinate transformation introduces a nontrivial Jacobian factor. This Jacobian factor defines a labeling entropy that corresponds to the uncertainty in the atoms that are associated with each CG site. Consequently, the labeling entropy effectively transfers configurational information from the lost ensemble into the mapped ensemble. Moreover, our analysis highlights the possibility of resonant mappings that separate the atomic potential into CG and intra-site contributions. We numerically illustrate these considerations with a Gaussian network model for the equilibrium fluctuations of actin. We demonstrate that the spectral quality, Q, provides a simple metric for identifying high quality representations for actin. Conversely, we find that neither maximizing nor minimizing the information content of the mapped ensemble results in high quality representations. However, if one accounts for the labeling uncertainty, Q(M) correlates quite well with the adjusted configurational information loss, Îmap(M), that results from the mapping.

Strained Cu(111) surface can be catalytic efficient for C–C coupling in CO2 electrochemical reduction

It is well accepted that the Cu(100) surface is catalytic active for C–C coupling in CO2 reduction. However, the (100) surface is less active for the preceding CO* formation process and, most importantly, less stable than other surfaces. In this work, we investigate the relationship between catalytic effects and general factors such as coordination number and spacing (strain) of the Cu surface atoms. We find that the former affects the CO* formation only and the latter affects both the CO* formation and the subsequent C–C coupling. Among all the strained surfaces with larger atomic spacing, the more stable Cu(111) surface is extraordinary and outperforms Cu(100) and the high index surfaces for CO2 reduction to C2 on Cu.

Improved mechanical properties of W-Zr-Ti-Nb alloys via adding Ti and Nb

Formation of the W2Zr intermetallic is the key reason for the low relative density and brittleness of W-Zr alloys. In this study, 65 W-Zr-Ti-Nb alloys with different Ti and Nb content were prepared by powder metallurgy. With the increase of Ti and Nb content, the proportion of the W2Zr in the alloy decreases, causing the densification of 65 W-Zr-Ti-Nb alloys. The thermodynamic calculation shows that the addition of both Ti and Nb results in a narrowing stabilized temperature range of W2Zr and an expanding stabilized temperature range of BCC-WTixNby, respectively, ultimately causing the disappearance of the W2Zr and formation of the WTixNby during non-equilibrium cooling. Both high ductility and strength can be achieved in the W-Zr-Ti-Nb alloys by assistance of the disappearance of the brittle W2Zr phase and the formation of the ductility WTixNby. The first principle calculation indicates that the co-doping Ti and Nb results in a larger expansion on the spacing of the {110} close-packed plane and a smaller expansion or even shrinkage on the atomic spacing along the close-packed direction of the WTixNby. Further, integrated crystal orbital Hamilton population (ICOHP) results proved that the bonding strength of W-Ti and W-Nb was weaker than that of W-W in WTixNby. Both increased spacing of {110} plane and decreased interatomic bonding strength aid in reducing Peierls-Nabarro stress, promoting plastic deformation. This study provides a new method for improving mechanical properties by tailoring the phase constitution in W-Zr alloys through co-doping Ti and Nb.

Critical local well-posedness of the nonlinear Schrödinger equation on the torus

In this paper, we study the local well-posedness of nonlinear Schrödinger equations on tori \mathbb{T}^{d} at the critical regularity. We focus on cases where the nonlinearity |u|^{a}u is nonalgebraic with small a>0 . We prove the local well-posedness for a wide range covering the mass-supercritical regime. Moreover, we supplementarily investigate the regularity of the solution map. In pursuit of lowering a , we prove a bilinear estimate for the Schrödinger operator on tori \mathbb{T}^{d} , which enhances previously known multilinear estimates. We design a function space adapted to the new bilinear estimate and a package of Strichartz estimates, which is not based on conventional atomic spaces.

Ice Nucleation Mechanisms on Platinum Surfaces in PEM Fuel Cells: Effects of Surface Morphology and Wettability.

Understanding the ice nucleation mechanism in the catalyst layers (CLs) of proton exchange membrane (PEM) fuel cells and inhibiting icing by designing the CLs can optimize the cold start strategies, which can enhance the performance of PEM fuel cells. Herein, mitigating the structural matching and templating effects by adjusting the surface morphology and wettability can inhibit icing on the platinum (Pt) catalyst surface effectively. The Pt(211) surface can inhibit icing because the atomic spacing of (211) crystalline surface is much larger than the characteristic distance of ice crystal, thereby mitigating the structural matching effects. A water overlayer on the Pt surface induced by the strong attraction of Pt can act as a template for ice layers and plays an important role in the icing process. Buckling of water overlayer due to the larger atomic spacing of (211) crystalline surface mitigates the templating effect and inhibits icing. Moreover, the water overlayer on the hydrophobic Pt(211) surface with fewer water molecules also mitigates the templating effect, which makes ice nucleation more difficult than homogeneous nucleation. These findings reveal the ice nucleation mechanisms on the Pt catalyst surface from the molecular level and are valuable for catalyst designs to inhibit icing in CL.

Symmetry-Shaped Singularities in High-Temperature Superconductor H3S.

The superconducting critical temperature of H3S ranks among the highest measured, at 203 K. This impressive value stems from a singularity in the electronic density-of-states, induced by a flat-band region that consists of saddle points. The peak sits right at the Fermi level, so that it gives rise to a giant electron-phonon coupling constant. In this work, we show how atomic orbital interactions and space group symmetry work in concert to shape the singularity. The body-centered cubic Brillouin Zone offers a unique 2D hypersurface in reciprocal space: fully connecting squares with two different high-symmetry points at the corners, Γ and H, and a third one in the center, N. Orbital mixing leads to the collapse of fully connected 1D saddle point lines around the square centers, due to a symmetry-enforced s-p energy inversion between Γ and H. The saddle-point states are invariably nonbonding, which explains the unconventionally weak response of the superconductor's critical temperature to pressure. Although H3S appears to be a unique case, the theory shows how it is possible to engineer flat bands and singularities in 3D lattices through symmetry considerations.

Regulation of Interface Ion Transport by Electron Ionic Conductor Construction toward High-Voltage and High-Rate LiNi0.5Co0.2Mn0.3O2 Cathodes in Lithium Ion Battery.

Simultaneously achieving high-energy-density and high-power-density is a crucial yet challenging objective in the pursuit of commercialized power batteries. In this study, atomic layer deposition (ALD) is employed combined with a coordinated thermal treatment strategy to construct a densely packed, electron-ion dual conductor (EIC) protective coating on the surface of commercial LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode material, further enhanced by gradient Al doping (Al@EIC-NCM523). The ultra-thin EIC effectively suppresses side reactions, thereby enhancing the stability of the cathode-electrolyte interphase (CEI) at high-voltages. The EIC's dual conduction capability provides a potent driving force for Li+ transport at the interface, promoting the formation of rapid ion deintercalation pathways within the Al@EIC-NCM523 bulk phase. Moreover, the strategic gradient doping of Al serves to anchor the atomic spacing of Ni and O within the structure of Al@EIC-NCM523, curbing irreversible phase transitions at high-voltages and preserving the integrity of its layered structure. Remarkably, Al@EIC-NCM523 displays an unprecedented rate capability (114.7 mAh g-1 at 20 C), and a sustained cycling performance (capacity retention of 74.72% after 800 cycles at 10 C) at 4.6V. These findings demonstrate that the proposed EIC and doping strategy holds a significant promise for developing high-energy-density and high-power-density lithium-ion batteries (LIBs).

The Separability Problem in Molecular Quantum Systems: Information-Theoretic Framework for Atoms in Molecules.

Even though molecules are fundamentally quantum entities, the concept of a molecule retains certain classical attributes concerning its constituents. This includes the empirical separability of a molecule into its three-dimensional, rigid structure in Euclidean space, a framework often obtained through experimental methods like X-Ray crystallography. In this work, we delve into the mathematical implications of partitioning a molecule into its constituent parts using the widely recognized Atoms-In-Molecules (AIM) schemes, aiming to establish their validity within the framework of Information Theory concepts. We have uncovered information-theoretical justifications for employing some of the most prevalent AIM schemes in the field of Chemistry, including Hirshfeld (stockholder partitioning), Bader's (topological dissection), and the quantum approach (Hilbert's space definition). In the first approach we have applied the generalized principle of minimum relative entropy derived from the Sharma-Mittal two-parameter functional, avoiding the need for an arbitrary selection of reference promolecular atoms. Within the ambit of topological-information partitioning, we have demonstrated that the Fisher information of Bader's atoms conform to a comprehensive theory based on the Principle of Extreme Physical Information avoiding the need of employing the Schwinger's principle, which has been proven to be problematic. For the quantum approach we have presented information-theoretic justifications for conducting Löwdin symmetric transformations on the density matrix to form atomic Hilbert spaces generating orthonormal atomic orbitals with maximum occupancy for a given wavefunction.

Revealing the hidden structure of disordered materials by parameterizing their local structural manifold

Durable interest in developing a framework for the detailed structure of glassy materials has produced numerous structural descriptors that trade off between general applicability and interpretability. However, none approach the combination of simplicity and wide-ranging predictive power of the lattice-grain-defect framework for crystalline materials. Working from the hypothesis that the local atomic environments of a glassy material are constrained by enthalpy minimization to a low-dimensional manifold in atomic coordinate space, we develop a generalized distance function, the Gaussian Integral Inner Product (GIIP) distance, in connection with agglomerative clustering and diffusion maps, to parameterize that manifold. Applying this approach to a two-dimensional model crystal and a three-dimensional binary model metallic glass results in parameters interpretable as coordination number, composition, volumetric strain, and local symmetry. In particular, we show that a more slowly quenched glass has a higher degree of local tetrahedral symmetry at the expense of cyclic symmetry. While these descriptors require post-hoc interpretation, they minimize bias rooted in crystalline materials science and illuminate a range of structural trends that might otherwise be missed.

Design and Semisynthesis of Biselectrophile-Functionalized Ubiquitin Probes To Investigate Transthioesterification Reactions.

Ubiquitin (Ub) regulates a wide array of cellular processes through post-translational modification of protein substrates. Ub is conjugated at its C-terminus to target proteins via an enzymatic cascade in which covalently bound Ub thioesters are transferred from E1 activating enzymes to E2 conjugating enzymes, and then to certain E3 protein ligases. These transthioesterification reactions proceed via transient tetrahedral intermediates. A variety of chemical strategies have been used to capture E1-Ub-E2 and E2-Ub-E3 mimics, but these introduce modifications that disrupt atomic spacing at the linkage point relative to the native tetrahedral intermediate. We have developed a biselectrophilic PSAN warhead that can be installed in place of the conserved C-terminal glycine in Ub and used to form ternary protein complexes linked via cyanomethyldithioacetals that closely mimic the native tetrahedral intermediates. Investigation of the reactivity of the warhead and substituted analogues led to an effective semisynthetic route to Ub-1-PSAN, which was used to form a ternary E1-Ub*-E2 complex as a mimic of the transthioesterification intermediate.

Accuracy of projected atomic virtual orbital space in embedding applications

ABSTRACT The performance of the recently suggested projected atomic orbitals (PAO) approach as the virtual space in excited state projection-based embedding applications is analysed. The role of the parameters in the PAO generation is discussed and the impact of different choices is evaluated on the ground state of the stacked formaldehyde and pyrrole dimers. A comparison of excitation energies obtained with PAOs and localised virtual orbitals is given and the role of diffuse basis functions is discussed using a benchmark set from previous studies.

Theoretical study on photoelectric properties of ferroelectric photovoltaic perovskite CsGeBr3 based on first-principle calculations

Ferroelectric photovoltaic materials have attracted great attention because of their unique photoelectric conversion mechanism, high photo-generated voltage, and adjustable polarization intensity. Traditional ferroelectric oxide perovskites such as BaTiO3, BiFeO3, and Pb(ZrTi)O3 have attracted much attention but they are not suitable as light absorbing layers in solar cells, due to the large optical bandgap, low light absorption rate, and small photogenerated current. Therefore, it is necessary to seek prominent materials with both ferroelectric and suitable band gaps. Recently, the evidence of ferroelectricity in the typical three-dimensional all-inorganic halide perovskites CsGeX3, with band gaps of 1.6 eV to 2.3 eV has been confirmed. However, the spontaneous polarization of ferroelectric perovskite CsGeX3 is ∼10 to 20 μc cm−2 which is weaker than that of ABO3 (∼26 to 75 μc cm−2). Strain engineering has a significant influence on the properties of semiconductor materials by controlling the lattice scaling and the internal atomic spacing. Hence, in this work, strain engineering is introduced to adjust the ferroelectric polarization and the photoelectric properties of ferroelectric perovskite CsGeBr3. The calculated results show that when the applied compressive strain increases from 0% to −4%, the spontaneous polarization of ferroelectric perovskite CsGeBr3 increases from 14.23 μc cm−2 to 51.61 μc cm−2, and the band gap reduces from 2.3631 eV to 1.5310 eV. The effective mass of electrons and holes gradually reduces, exciton binding energies decrease from 48 meV to 5 meV, and the optical absorption coefficient is strongly enhanced from 3 × 105 cm−1 to 5 × 105 cm−1 in the visible range. Besides, the power conversion efficiency(PCE) of CsGeBr3 is significantly increased from 16.95% to 26.77%. Therefore, the results indicate that the application of compressive strain can increase the ferroelectric polarization and enhance the original photovoltaic performance of ferroelectric perovskite CsGeBr3. Our theoretical calculations can provide useful insights and beneficial guidance into experimental studies of ferroelectric perovskites in photoelectric applications.

Atomic-scale investigation of the mechanisms of deformation-induced martensitic transformation at ultra-cryogenic temperatures

Liquefied natural gas storage and transportation as well as space propulsion systems have sparked interest in the martensitic transformation and behaviours of 316 L stainless steels (SS) under ultra-cryogenic deformation. In this study, high-resolution transmission electron microscopy (HRTEM) and molecular dynamics (MD) simulations were used to investigate the atomic arrangements and crystalline defects of deformation-induced γ-austenite → ε-martensite → α′-martensite and γ → α′ martensitic transformations in 316 L SS at 15 and 173 K. The γ → ε transformation involves the glide of Shockley partial dislocations on (111)γ planes without a change in atomic spacing. The formation of an α′ inclusion in a single ε-band is achieved by a continuous lattice distortion, accompanied by the formation of a transition zone of α′ and the expansion of the average atomic spacings due to dislocation shuffling. As α′ grows further into γ, the orientation relationship (OR) of the α′ changes by lattice bending. This process follows the Bogers-Burgers-Olson-Cohen model despite it not occurring on intersecting shear bands. Stacking faults and twins can also serve as nucleation sites for α′ at 173 K. We also found that direct transformation of γ → α′ occurs by the glide of 6aγ[112¯]/12 dislocations on every (111)γ plane with misfit dislocations. Overall, this study provides, for the first time, insights into the atomic-scale mechanisms of various two-step and one-step martensitic transformations induced by cryogenic deformation and corresponding local strain, enhancing our understanding of the role of martensitic transformation under ultra-cryogenic-temperature deformation in controlling the properties.

Synthesis and Catalytic Performance of Mo2C/MoS2 Composite Heterojunction Catalysts.

Hydrogen, as a clean, safe, and efficient energy carrier, is one of the hot energy sources that have attracted much attention. Mo2C, due to the introduction of C atoms, makes the atomic spacing of the Mo lattice decrease and changes the width of the d-band, which makes the electronic properties of Mo2C similar to that of Pt noble metals, exhibiting excellent electrochemical hydrogen precipitation performance. MoS2, due to its special crystal structure and tunable electronic structure, has been widely studied. In this paper, Mo2C nanoparticles were prepared by high-temperature carbonization, and then two-dimensional layered MoS2 were be loaded on Mo2C nanoparticles by the hydrothermal method to synthesize Mo2C/MoS2 composite catalysts. Their electrochemical hydrogen precipitation (HER) performance under acidic conditions was tested. The above catalysts were also characterized by modern material testing methods such as XRD, SEM, TEM, and XPS. The results showed that the composite catalysts exhibited the most excellent electrochemical hydrogen precipitation performance at Mo2C/MoS2-3, with the lowest overpotential at a current density of 10 mA cm-2, Tafel slope, and electrochemical impedance. At the same time, the electrochemically active area was dramatically enhanced, with good stability under prolonged testing. The catalytic activity was significantly improved compared with that of Mo2C and MoS2. The characterization and experimental results indicate that the heterogeneous structure of Mo2C and MoS2 formed a built-in electric field between the two, which accelerated the electron transfer efficiency and provided more active sites. The Mo2C/MoS2 composite catalyst is a low-cost, easy-to-prepare, and high-efficiency electrochemical hydrogen precipitation catalyst, providing a new idea for developing green and clean energy.

High‐Entropy Anti‐Perovskites with Enhanced Negative Thermal Expansion Behavior

AbstractThe negative thermal expansion (NTE) materials, which can act as thermal‐expansion compensators to counteract the positive thermal expansion, have great applications merit in precision engineering. However, the exploration of NTE behavior with a wide temperature range has reached its upper ceiling through traditional doping strategies due to composition limitations. In this paper, the unique sluggish characteristics and extended optimization space in empirically screened high‐entropy anti‐perovskite (HEAP) are utilized to broaden the NTE temperature range. Typically, the NTE temperature range in Mn3Cu0.2Zn0.2Ga0.2Ge0.2Mn0.2N is broadened to ΔT = 235 K (5 K ≤ T ≤ 240 K), which is two or three times wider than that of traditional low‐entropy doping systems. The neutron diffraction analysis reveals a unique sluggish characteristic in magnetic phase transition which survives in an ultra‐wide temperature range of 5 K ≤ T ≤ 350 K (ΔT = 345 K). The sluggish characteristic is further experimentally proved to come from disturbed phase transition dynamics due to distortion in atomic spacing and chemical environmental fluctuation observed by the spherical aberration‐corrected electron microscope. The demonstration provides a unique paradigm for broadening the temperature range of NTE materials through entropy engineering.

Exploring the Regulatory Mechanism of ZnS Materials under Stress and Re Doping: Insights from Density Functional Theory

The application prospects of ZnS stress luminescent materials cover many fields such as high‐precision structural monitoring, smart materials, biomedical imaging, and new sensor technologies, which bring broad application prospects and significance to them in the fields of engineering, medicine, and scientific research. In this article, the electronic structure and optical properties of ZnS materials are successfully regulated by applying pressure and doping rare earth metals (Re), and it is found that the regulation of the luminescence properties of ZnS is the result of stress and doping interactions. Specifically, when pressure is applied or Re metal doping, the lattice structure is deformed and the atomic spacing is adjusted, which affects the electronic energy level distribution and optical properties of ZnS materials. Computational analysis of density functional theory (DFT) reveals the microscopic mechanisms behind these changes, including changes in lattice parameters, adjustment of bond length, and changes in band structure. This study provides theoretical guidance for the design and synthesis of high‐performance and high‐stability ZnS light‐emitting materials, and is of great significance for expanding the application of ZnS in the field of lasers and sensors.

Understanding the Interaction of Uranyl Cation with Two C-Pivot Tripodal Amides: Synthesis, Complexation, Microcalorimetry, and DFT Studies.

Complexation of uranyl ions with two structurally related C-pivotal tripodal amides with varying spacer lengths, synthesized for the first time, was studied by optical spectroscopy. In the tripodal amides, the coordination was through the carbonyl O atoms where the carbonyl groups were away from the central C-atom by three spacer atoms (LI) and four spacer atoms (LII), respectively. Increasing the spacer atoms going from LI to LII favors the complexation with the linear uranyl cations and results in stronger complex formation. The complexation heat between the uranyl cations and the two amide ligands was directly measured by microcalorimetric titrations. The complexation with both the ligands was driven by exothermic enthalpy and positive entropy changes. Formation of the complex proceeded by the replacement of water molecules from the primary coordination sphere of the uranyl cation. Both ligands formed bisolvated (ML2-type) complexes in which one unit of the ligand binds in a monodentate manner and the other in a bidentate mode. Density functional theory calculations further supported our experimental observations.

An FFT based approach to account for elastic interactions in OkMC: Application to dislocation loops in iron

Object kinetic Monte Carlo (OkMC) is a fundamental tool for modeling defect evolution in volumes and times far beyond atomistic models. The elastic interaction between defects is classically considered using a dipolar approximation but this approach is limited to simple cases and can be inaccurate for large and close interacting defects. In this work a novel framework is proposed to include exact elastic interactions between defects in OkMC valid for any type of defect and anisotropic media. In this method, the elastic interaction energy of a defect is computed by volume integration of its elastic strain multiplied by the stress created by all the other defects, being both fields obtained numerically using a FFT solver. The resulting interaction energies reproduce analytical elastic solutions and show the limited accuracy of dipole approaches for close and large defects.The OkMC framework proposed is used to simulate the evolution in space and time of self-interstitial atoms and dislocation loops in iron. It is found that including the anisotropy has a quantitative effect in the evolution of all the type of defects studied. Regarding dislocation loops, it is observed that using the exact interaction energy results in higher interactions than using the dipole approximation for close loops.