Atomic Clusters Research Articles

Trimetallic FeNiCu Atomic Clusters Supported on Carbon Matrix: Highly Active Catalysts for C3H6–SCR of NO

Trimetallic FeNiCu Atomic Clusters Supported on Carbon Matrix: Highly Active Catalysts for C₃H₆–SCR of NO

From electrons to phase diagrams with machine learning potentials using pyiron based automated workflows

AbstractWe present a comprehensive and user-friendly framework built upon the integrated development environment (IDE), enabling researchers to perform the entire Machine Learning Potential (MLP) development cycle consisting of (i) creating systematic DFT databases, (ii) fitting the Density Functional Theory (DFT) data to empirical potentials or MLPs, and (iii) validating the potentials in a largely automatic approach. The power and performance of this framework are demonstrated for three conceptually very different classes of interatomic potentials: an empirical potential (embedded atom method - EAM), neural networks (high-dimensional neural network potentials - HDNNP) and expansions in basis sets (atomic cluster expansion - ACE). As an advanced example for validation and application, we show the computation of a binary composition-temperature phase diagram for Al-Li, a technologically important lightweight alloy system with applications in the aerospace industry.

Dual Modulation of Hydroxyl Action on Ruthenium Surface by Single‐Atom Supports for Alkaline H2 Evolution

AbstractRuthenium (Ru)‐based catalysts are known to accelerate the slow kinetics of the alkaline hydrogen evolution reaction (HER). However, enhancing the transfer kinetics of adsorbed hydroxyl (OHad) remains challenging. Herein, a dual‐regulation strategy is presented to alleviate OH blockage on the catalyst surface, using a cluster‐level Ru electrocatalyst supported by single‐atom CoN4 generated in situ on carbon nanotubes (CNTs). Experimental and theoretical studies demonstrate that introducing oxophilic single‐atom CoN4 can mitigate the strong interaction between Ru and OHad by directly competing for OHad on the Ru surface, thereby preventing Ru site poisoning. Meanwhile, single‐atom CoN4 effectively modifies the electronic structure of Ru atomic clusters (ACs), indirectly optimizing the energy barriers for OH desorption at the Ru interface and promoting OHad release. The electronic interaction between Ru ACs and CoN4 also inhibits Ru atom migration, significantly enhancing catalytic stability. The resulting catalyst shows excellent HER activity at 10 mA cm−2 with a low overpotential of 15 mV in alkaline solution and remains stable at 200 mA cm−2 for over 1000 h. An alkaline anion‐exchange membrane water electrolyzer (AEMWE) using this catalyst can exhibit an ultralow potential (1.785 V at 1 A·cm−2) and high stability at 500 mA·cm−2.

Laser-based approach to measure small nuclear cross sections in plasma

We demonstrate an approach successfully measuring very small nuclear isomeric excitation cross sections (on the order of 10 to 100 picobarns) via laser-cluster interaction. The interaction between an intense laser pulse and Kr atomic clusters generates a high-temperature and high-density plasma ball in which nuclear excitations are facilitated by inelastic electron scattering. The electron temperature reaches several hundred keV (corresponding to 10[Formula: see text] K), similar to a stellar environment. The very small nuclear excitation cross sections are extremely challenging to measure otherwise, for example using traditional accelerator-based approaches. Our method opens a broad avenue of measuring small nuclear cross sections and holds promise for advancing understanding of nuclear transition mechanisms and exploring pathways in the evolutionary dynamics of elements within stellar environments.

Analysis of Local Structure of Mechanical and Thermal Rearrangements in Glasses with the Atomic Cluster Expansion.

We explore the structural signatures of excitations in amorphous materials with the atomic cluster expansion (ACE), a universal and complete linear basis of descriptors of the atomic environment. Body-orderd linear classifiers are constructed that distinguish between active and inactive particles in three different model glass formers, in which structural relaxation occurs either through spontaneous thermal activation or by simple shear. We find that in binary mixtures, maximum prediction accuracy is already achieved with very few two-body correlations, while a polymer glass requires both two- and three-body correlations. Trends are robust across both activation mechanisms.

Hyperparameter Optimization for Atomic Cluster Expansion Potentials.

Machine learning-based interatomic potentials enable accurate materials simulations on extended time- and length scales. ML potentials based on the atomic cluster expansion (ACE) framework have recently shown promising performance for this purpose. Here, we describe a largely automated computational approach to optimizing hyperparameters for ACE potential models. We extend our openly available Python package, XPOT, to include an interface for ACE fitting, and discuss the optimization of the functional form and complexity of these models based on systematic sweeps across relevant hyperparameters. We showcase the usefulness of the approach for two example systems: the covalent network of silicon and the phase-change material Sb2Te3. More generally, our work emphasizes the importance of hyperparameter selection in the development of advanced ML potential models.

Synthesis, Structure and Catalytic Properties of Hyp3[Ge9Rh]PPh3

In single‐site homogeneous catalysts (SSHoCs) transition metal atoms are incorporated in the surface of a small homoatomic atom cluster. Within this concept the main group element cluster is considered as innocent support material, while the catalysis itself is realised at the transition metal atom. In the case of [Ge9] clusters, both transition metal atoms and the Ge atoms have low oxidation state. Thus improving the synthesis towards transition metal decorated Zintl cluster has become important in the last years, and the catalytic activity of these clusters is of high interest. An optimised one‐step synthetic protocol for Hyp3[Ge9Rh]PPh3 is presented. The product is characterised by NMR spectroscopy, LIFDI/MS and single crystal structure determination. The Rh atom is incorporated in the clusters surface and bridges a deltahedral cluster face, whereby one of the triangular edge opens forming an almost planar face of three Ge and one Rh atom. PPh3 ligand dissociation as well as the catalytic activity in the isomerisation of 1‐hexene and allylbenzene as well as the hydrogenation of those substrates with hydrogen is investigated.

Engineering of hyperentangled complex quantum networks

Abstract We propose a novel scheme to engineer the atomic hyperentangled cluster and ring graph states invoking cavity-QED technique for applicative relevance to quantum biology and quantum communications utilizing the complex quantum networks. These states are engineered using both external quantized momenta states and energy levels of neutral atoms under off-resonant and resonant Atomic Bragg Diffraction (ABD) technique. The study of dynamical capacity and potential efficiency have certainly enhanced the range of usefulness of these states. In order to assess the operational behavior of such states when subjected to a realistic noise environment has also been simulated, demonstrating long enough sustainability of the proposed states. Moreover, experimental feasibility of the proposed scheme has also been elucidated under the prevailing cavity-QED research scenario.

The synergistic effect of Co atomic clusters and single atoms facilitates the fenton-like reaction on A- and R-TiO2

The regulation of single atom (SA) sites is crucial for the promotion of advanced oxidation processes (AOPs). Here A- and R-TiO2 with Co mixed sites (clusters and single atoms, CS) were prepared to degrade sulfamethoxazole (SMX) by activating peroxymonosulfate (PMS). Co CS/A-TiO2+PMS system can completely remove SMX within 14 min under secondary effluent and dark conditions, and its rate constant (0.4926 min-1) was 4.4, 3.2 and 2.5 times higher than that of Co SA/R-TiO2, Co SA/A-TiO2 and Co CS/R-TiO2 systems, respectively. Experiments and calculations verified that the electron configuration of Co SA was optimized by Co clusters, facilitating the adsorption, conversion and desorption of PMS by Co SA, leading to the enhancement of Fenton-like activity. Co CS/A-TiO2 catalytic sponges exhibited exceptional degradation performance in microreactor treatment experiment. This work reveals the synergistic effect between SA and clusters at atomic level and provides an all-purpose strategy (catalytic sponge) for the recovery of non-magnetic catalysts in wastewater treatment.

Salt template-assisted polymer tethering strategy to achieve high dispersed cobalt single atoms/clusters on porous carbon catalysts for effective Fenton-like reactions

The exploration of the synthesis of porous carbon-supported metal nanocatalysts with high metal loading and dispersion for the development of heterogenous catalysts is important. However, this remains a challenging subject. In this paper, a salt template-assisted polymer tethering strategy was proposed to prepare Co single atom and ultrafine cluster anchored on porous carbon (Co-NPC) with a high-loading of 16.9wt%, thereby exposing high density of reaction sites. The obtained Co-NPC catalyst exhibited excellent catalytic performance for almost 100% degradation of bisphenol A (BPA) within 20min, which is much faster than the CoSA-NPC catalyst with only single atom sites and Co-NC without salt template added. Radical quenching experiments and electron paramagnetic resonance tests verified that both the nonradical oxidation pathway by 1O2, the electron transfer and radical oxidation pathway by •OH, SO4•- appeared during the degradation process. After 3 cycles, the removal rate of BPA did not decrease significantly. The fixed bed experiment revealed that Co-NPC could realize the continuous degradation of methylene blue (MB) with almost 100% degradation efficiency. This research indicated that the strategy by pyrolyzing metal coordinated polymer is a potential method for the synthesis of high metal loading catalyst at gram scale, meeting the requirement of practical applications.

Molecular dynamics simulation of friction in DLC films with different Cr doping levels

This study systematically investigates the impact of varying Cr doping levels on the friction properties of DLC films using molecular dynamics simulations. The results demonstrate that under identical friction velocities and load conditions, the friction force of DLC films significantly decreases when the Cr doping content reaches 16.5 %. High Cr doping levels lead to the formation of Cr atomic clusters at the interface, hindering contact and reducing the number of interface bonds. These clusters act as lubricants, filling the interface gaps and thereby reducing the friction force. Internal stress calculations indicate that Cr doping effectively reduces the average internal stress of DLC films. For DLC films with lower Cr doping levels, the friction force exhibits similar trends under different friction velocities, while films with higher Cr doping levels show a more pronounced response, with friction force increasing at higher velocities. Increasing the load significantly raises the friction force, especially for DLC films with higher Cr doping levels. Furthermore, high Cr doping levels under high loads lead to significant structural damage and adhesive wear. This study provides theoretical and technical references for optimizing the friction performance of DLC films.

Effect of trace Bi addition on the microstructure and mechanical properties of hypoeutectic Al-Mg-Si-Mn alloy

The effects of Bi on the eutectic structure and mechanical properties of AlMg5Si2Mn alloy were investigated. The results show that when trace Bi is added to the alloy, the eutectic Mg2Si phase in the alloy is successfully refined from long plate-like to fine fiber rod-like and coral-like structure. It is mainly attributed to the precipitation of Bi atomic clusters on the front of the solid-liquid interface and form a component supercooling, in which part of Bi atoms react with Mg atoms to form nanosized Mg3Bi2 particles, which effectively inhibits the rapid growth of eutectic Mg2Si and promotes the branching and refining of eutectic Mg2Si. The strength and ductility of AlMg5Si2Mn alloy containing Bi are significantly improved simultaneously. Compared to the unmodified alloy, the largest tensile strength, yield strength and elongation to failure of the 0.3wt % Bi-modified alloy are increased to 28.04%, 12.3% and 129.1%, respectively. The fracture mode of the alloy changes from brittle fracture to ductile fracture.

Atomic scale in-situ observation of gas-solid interaction regulating the pre-nucleation process of Pd atomic clusters

Advancements in nanotechnology have propelled the understanding of atomic-scale nucleation processes, essential for the evolution of atomic manufacturing. The process of amorphous precursors nucleation showcases a complex transition influenced by various factors. Utilizing aberration-corrected ETEM and theoretical calculation, we explore the nucleation of amorphous Pd atomic clusters. This study examines the nucleation dynamics and gas-solid interaction regulating of Pd clusters on ultrathin carbon films, prepared via electron beam evaporation. HRTEM observation and FFT analysis reveal that, in the early stage of nucleation, Pd cluster growth predominantly follows an Ostwald ripening-like mechanism. Atoms from smaller clusters migrate and attach to larger ones, facilitating their progression to critical nucleation size. Environmental conditions significantly influence this process; hydrogen atmospheres lower the surface energy of Pd clusters, reducing the critical nucleation size, while argon atmospheres impede growth of Pd clusters by occupying migration sites on the carbon surface. These insights into atomic cluster behavior and environmental interactions are crucial for understanding the early stages of nucleation from amorphous to crystalline and can help opens new avenues for the controlled fabrication of materials with optimized functionalities.

Atomistic Simulations of Hydration and Antibiofouling Behavior of Amphiphilic Polymer Brush Surfaces Functionalized with TMAO and Short Fluorocarbon.

Developing fouling-resistant materials is of paramount interest in marine industries and biomedical applications. In this work, we studied the interfacial hydration and surface-protein interactions of the amphiphilic brush surface functionalized with hybrid hydrophilic trimethylamine N-oxide (TMAO) and hydrophobic pentafluoroethyl groups using a combination of atomistic molecular dynamics simulations and free-energy computations. Our results show that while the interfacial hydration density of the amphiphilic surface slightly decreases with the introduction of small fluorocarbons compared to that of the pure TMAO-functionalized surface, the amphiphilic surface remains relatively strong in resisting protein adsorption. The nanosized clustering of hydrophobic fluorine atoms on the top of the amphiphilic brush surface introduces weak protein adsorption; however, due to the strong interfacial hydration and weak hydrophobic interaction, the amphiphilic surface exhibits sufficient antibiofouling activities. Our fundamental studies will be critical for the discovery of marine fouling-resistant coating surfaces.

Observation of doping-induced spin–orbit coupling in gold cluster assembly to carrier-tuneable semiconductors and Schottky behaviors

The doping influenced carrier dynamics to maneuvering n-type to p-type semiconducting gold cluster assembly have been assessed. The resonance photoemission spectroscopic measurements corroborate an incremental rise in the density of states at the valence edge, the overlap of valence states due to doping, and the presence of distinct spin–orbit splitting and coupling in manganese-doping (Au7Mn) compared to gold clusters (Au8), originating from the relativistic effect resulted in a semiconducting property. The work function dependent current–voltage characteristics in metal–semiconductor configuration show Ohmic and Schottky behaviors assorting p-type carriers in Au7Mn in contrast to the n-type Au8 and are presenting an atomic cluster based fast electronic device.

Customized Heteronuclear Dual Single‐Atom and Cluster Assemblies via D‐Band Orchestration for Oxygen Reduction Reaction

AbstractAdvanced oxygen reduction reaction (ORR) catalysts, integrating with well‐dispersed single atom (SA) and atomic cluster (AC) sites, showcase potential in bolstering catalytic activity. However, the precise structural modulation and in‐depth investigation of their catalytic mechanisms pose ongoing challenges. Herein, a proactive cluster lockdown strategy is introduced, relying on the confinement of trinuclear clusters with metal atom exchange in the covalent organic polymers, enabling the targeted synthesis of a series of multicomponent ensembles featuring FeCo (Fe or Co) dual‐single‐atom (DSA) and atomic cluster (AC) configurations (FeCo‐DSA/AC) via thermal pyrolysis. The designed FeCo‐DSA/AC surpasses Fe‐ and Co‐derived counterparts by 18 mV and 49 mV in ORR half‐wave potential, whilst exhibiting exemplary performance in Zn‐air batteries. Comprehensive analysis and theoretical simulation elucidate the enhanced activity stems from adeptly orchestrating dz2‐dxz and O 2p orbital hybridization proximate to the Fermi level, fine‐tuning the antibonding states to expedite OH* desorption and OOH* formation, thereby augmenting catalytic activity. This work elucidates the synergistic potentiation of active sites in hybrid electrocatalysts, pioneering innovative targeted design strategies for single‐atom‐cluster electrocatalysts.

Unraveling the roles of atomically-dispersed Au in boosting photocatalytic CO2 reduction and aryl alcohol oxidation

Atomically-dispersed metal-based materials represent an emerging class of photocatalysts attributed to their high catalytic activity, abundant surface active sites, and efficient charge separation. Nevertheless, the roles of different forms of atomically-dispersed metals (i.e., single-atoms and atomic clusters) in photocatalytic reactions remain ambiguous. Herein, we developed an ethylenediamine (EDA)-assisted reduction method to controllably synthesize atomically dispersed Au in the forms of Au single atoms (AuSA), Au clusters (AuC), and a mixed-phase of AuSA and AuC (AuSA+C) on CdS. In addition, we elucidate the synergistic effect of AuSA and AuC in enhancing the photocatalytic performance of CdS substrates for simultaneous CO2 reduction and aryl alcohol oxidation. Specifically, AuSA can effectively lower the energy barrier for the CO2→*COOH conversion, while AuC can enhance the adsorption of alcohols and reduce the energy barrier for dehydrogenation. As a result, the AuSA and AuC co-loaded CdS show impressive overall photocatalytic CO2 conversion performance, achieving remarkable CO and BAD production rates of 4.43 and 4.71 mmol g−1 h−1, with the selectivities of 93% and 99%, respectively. More importantly, the solar-to-chemical conversion efficiency of AuSA+C/CdS reaches 0.57%, which is over fivefold higher than the typical solar-to-biomass conversion efficiency found in nature (ca. 0.1%). This study comprehensively describes the roles of different forms of atomically-dispersed metals and their synergistic effects in photocatalytic reactions, which is anticipated to pave a new avenue in energy and environmental applications.

A Constrained CASSCF(2,2) Approach to Study Electron Transfer between a Molecule and Metal Cluster.

We have implemented a constrained CASSCF(2,2) calculation so as to study thermal electron transfer between a chlorine ion and a cluster of lithium atoms of variable size (from 1 to 17). Our calculations illustrate how the geometry of the ground state-charge transfer state crossing point (as well as the strength of a diabatic coupling) can depend sensitively on the number of metal ions (i.e., the size of the cluster) and the relative positioning of the donor and acceptor. Thus, this set of calculations is an initial step toward understanding the transition from homogeneous to heterogeneous electron transfer. In the future, these constrained calculations should allow us to model still far larger systems, ideally opening up a pathway to study meaningful electrochemical phenomena.

Efficient Parametrization of Transferable Atomic Cluster Expansion for Water.

We present a highly accurate and transferable parametrization of water using the atomic cluster expansion (ACE). To efficiently sample liquid water, we propose a novel approach that involves sampling static calculations of various ice phases and utilizing the active learning (AL) feature of the ACE-based D-optimality algorithm to select relevant liquid water configurations, bypassing computationally intensive ab initio molecular dynamics simulations. Our results demonstrate that the ACE descriptors enable a potential initially fitted solely on ice structures, which is later upfitted with few configurations of liquid, identified with AL to provide an excellent description of liquid water. The developed potential exhibits remarkable agreement with first-principles reference, accurately capturing various properties of liquid water, including structural characteristics such as pair correlation functions, covalent bonding profiles, and hydrogen bonding profiles, as well as dynamic properties like the vibrational density of states, diffusion coefficient, and thermodynamic properties such as the melting point of the ice Ih. Our research introduces a new and efficient sampling technique for machine learning potentials in water simulations while also presenting a transferable interatomic potential for water that reveals the accuracy of first-principles reference. This advancement not only enhances our understanding of the relationship between ice and liquid water at the atomic level but also opens up new avenues for studying complex aqueous systems.

Reactivity of Atomic Oxygen Radical Anions in Metal Oxide Clusters.

Atomic oxygen radical anion (O⋅-) represents an important type of reactive centre that exists in both chemical and biological systems. Gas-phase atomic clusters can be studied under isolated and well controlled conditions. Studies of O⋅--containing clusters in the gas-phase provide a unique strategy to interpret the chemistry of O⋅- radicals at a strictly molecular level. This review summarizes the research progresses made since 2013 for the reactivity of O⋅- radicals in the atomically precise metal oxide clusters including negatively charged, nanosized, and neutral heteronuclear metal clusters benefitting from the development of advanced experimental techniques. New electronic and geometric factors to control the reactivity and product selectivity of O⋅- radicals under dark and photo-irradiation conditions have been revealed. The detailed mechanisms of O⋅- generation have been discussed for the reaction systems of nanosized and heteroatom-doped metal oxide clusters. The catalytic reactions mediated by the O⋅- radicals in metal clusters have also been successfully established and the microscopic mechanisms about the dynamic generation and depletion of O⋅- radicals have been clearly understood. The studies of O⋅- containing metal oxide clusters in the gas-phase provided new insights into the chemistry of reactive oxygen species in related condensed-phase systems.