Atmospheric Trace Metal Pollution Research Articles

Trace Metal Bioaccumulation in Feral Pigeons (Columba livia f. domestica) and Rooks (Corvus frugilegus) Residing in the Urban Environment of Iasi City, Romania.

Nowadays, trace metal contamination within urban atmospheres is a significant and concerning global issue. In the present study, two synanthropic bird species, namely, the feral pigeon (Columba livia f. domestica) and the rook (Corvus frugilegus), were employed as bioindicators to assess the atmospheric trace metal pollution in Iasi City, Romania. The concentrations of Ni, Pb, Cd, Co, Cr, and Cu were determined through high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GF-AAS) of various tissues, including the liver, kidney, lung, heart, muscle, and bone, of feral pigeons and rooks collected in Iasi City. The order of trace metal concentrations in the tissues of feral pigeons and rooks in Iasi City was similar: Cu > Pb > Ni > Cd > Cr > Co. However, trace element values in most tissues were higher in the rook samples than in feral pigeon ones, except for Co, which had elevated levels in feral pigeon renal and cardiac tissues, and Cu, which registered the highest concentrations in feral pigeon liver and kidney tissues. While not statistically significant, Pb concentration values in the PM10 fraction of atmospheric particles positively correlated with Pb concentrations in rook kidney samples (p = 0.05). The concentration levels of Cd, Pb, and Ni in the PM10 fraction of air particles showed a positive correlation with Cd levels in the samples of pigeon heart and rook liver, kidney, and heart, Pb levels in the samples of pigeon kidney, heart, and muscle and rook liver and bone, and Ni levels in the samples of pigeon liver, kidney, and bone and rook liver, muscle, and bone, respectively.

Assessment and Evaluation of Atmospheric Trace Metals Pollution in Lapai Metropolis, Niger State Using Foliose Epiphytic Lichen (Parmelia sulcata)

The levels of atmospheric trace metals were determined using foliose epiphytic lichens (Parmelia sulcata) samples collected in eight (8) different locations within the residential areas and two control locations outside the residential area of Lapai town in Lapai local government of Niger State. A stratified random sampling technique was adopted and the analysis of the samples with atomic absorption spectrophotometer (AAS) gives the concentration range of the metals as follows; 1.123-7.837 mg/kg for Fe, 4.579-6.627 mg/kg for Pb, 0.210-2.152 mg/kg for Cr, 0.491-1.171 mg/kg for Ni, 0.018-0.983 mg/kg for Cd, 0.057-1.471 mg/kg Zn, 0.198-1.287 mg/kg for Mn, and 0.098-2.583 mg/kg for Cu but Selenium was not detected in all the samples. The levels of some of these metals were slightly higher compared to recommend USEPA (1993) limits but lower than FEPA (1991) limits. However, the distribution of these metals was not uniform across the samples, though their level was still at the background and very low compared to the reports on similar studies from industrialized areas of South-south and South-west Nigeria and other European countries. The variation in concentration of these metals at P≤0.05 indicates their source is mainly anthropogenic in origin. Epiphytic lichens validate the cost-effectiveness of this method for evaluating, assessing, and identifying depositional sources of the metals in the environment. The study revealed the atmospheric trace metal concentration of the area under study to be at a threshold level and hence the environment is still very safe from atmospheric trace metal pollution.

Spatial distribution and source analysis of airborne trace metal deposition using moss biomonitoring in Huai'an, China.

Terrestrial mosses are tracers for studying atmospheric trace metal deposition and pollution. Here, Al, Fe, Zn, Mn, Ba, Cu, V, Cr, Pb, Ni, Co, and Cd concentrations in mosses from Huai'an, China, were measured to investigate their contamination level, spatial distribution, and sources. The average concentration of all the metals (except Ni) was much higher than those in Albania, a "hotspot" of toxic metal contamination in Europe. The pollution degree of the metals varied significantly: moderate contamination by Al, Fe, Mn, Zn, Cr, V, and Cd; slight contamination by Ba, Cu, Ni, and Pb; and suspected contamination by Co. Based on the Nemerow index (PN), only 8% of the moss samples were graded as moderate pollution, while the remaining 92% were rated as heavy pollution, with Cd and Zn contributing the most. The potential ecological risk index (RI) indicated a moderate potential ecological risk from the metals in Huai'an, with the atmosphere most heavily polluted by Cd. Further, the positive matrix factorization (PMF) model was applied to confirm the metal contamination sources and allocate their source contributions in Huai'an mosses. The results showed that the source contributions of industrial activities related to metal smelting, textile dyestuff and agricultural activities, mining development, natural source, and coal burning and traffic emission accounted for 28.86%, 20.29%, 19.83%, 17.98%, and 13.04%, respectively.

Magnetic Emissions from Brake Wear are the Major Source of Airborne Particulate Matter Bioaccumulated by Lichens Exposed in Milan (Italy)

The concentration of selected trace elements and the magnetic properties of samples of the lichen Evernia prunastri exposed for 3 months in Milan (Italy) were investigated to test if magnetic properties can be used as a proxy for the bioaccumulation of chemical elements in airborne particulate matter. Magnetic analysis showed intense properties driven by magnetite-like minerals, leading to significant correlations between magnetic susceptibility and the concentration of Fe, Cr, Cu, and Sb. Selected magnetic particles were characterized by Scanning Electron Microscope and Energy Dispersion System microanalyses, and their composition, morphology and grain size supported their anthropogenic, non-exhaust origin. The overall combination of chemical, morphoscopic and magnetic analyses strongly suggested that brake abrasion from vehicles is the main source of the airborne particles accumulated by lichens. It is concluded that magnetic susceptibility is an excellent parameter for a simple, rapid and cost-effective characterization of atmospheric trace metal pollution using lichens.

Perspective of mitigating atmospheric heavy metal pollution: using mosses as biomonitoring and indicator organism.

Mosses were proved as an ideal and reliable biomonitor as well as an indicator of atmospheric trace metal pollution. They are used as model indicator species of air pollution since long back due to their simple structure, genetic diversity, totipotency, rapid colony-forming ability, and high metal resistance behavior. Bryomonitoring technique is gradually being popularized as an economically viable procedure for estimating the degrees of environmental health and evaluating the toxic pollutants in biosphere. Thus, in the present scenario, many parts of the world use these organisms for monitoring the air pollution. This article describes an overview of the relationship of terrestrial mosses with trace metals with respect to their uptake, accumulation, and toxification as well as detoxification and tolerance mechanisms. The review article explicitly expresses the caliber of the cryptogamic mosses in establishing the pristine environment around the world. It also highlights the underpinning mechanisms and potential for future research directions. We have referred more than 250 articles, which deals with the assessment and impact of different heavy metals on 52 numbers of different moss species belongs to different climatic zones. The present review covers the research work in this area carried out worldwide since 1965.

Historical Trends of Atmospheric Trace Metal Pollution in Northern Guizhou Province as Reconstructed from Alpine Lake Sediments

Atmospheric trace metal pollution is a striking environmental problem globally. Because of the limitations in monitoring data, our knowledge of the historical processes and sources of atmospheric trace metal pollution in China and its influence on remote terrestrial environmental quality is limited. The historical variations in atmospheric trace metal (Cd, Cr, Cu, Hg, Ni, Pb, and Zn) pollution during the past 400 years in the Fanjing Mountain area, northern Guizhou Province were studied by analyzing the metal concentrations and Pb isotopes in lake sediments. The results showed that concentrations of all metals in the sediments were relatively constant before 1800(A.D.). After 1800, concentrations of Cr, Cu, Ni, and Zn increased at first and then decreased, while concentrations of Hg, Cd, and Pb generally increased gradually over the most recent century and subsequent decades. The enrichment factor and 207Pb/206Pb analysis results indicated that Cd, Pb, and Hg were typical pollutants. Pollution of Hg began at around 1880(A.D.), and pollution of Cd and Pb has occurred since the 1950s; all pollutants exhibited aggravated trends in recent times. Pollution levels of Hg in recent years in the Fanjing Mountain area were comparable to those in other remote areas of East China, but levels were lower than those in Europe, America, and the Tibetan Plateau. In contrast, pollution levels of Cd and Pb in these areas showed large variability. By comparing the historical processes of trace metal pollution in different regions and exploring the potential pollution sources of metals in the study region, it can be deduced that atmospheric Hg pollution in the Fanjing Mountain area was the result of both global and regional emissions, while Cd and Pb pollution largely came from regional sources such as non-ferrous metals smelting and coal combustion emissions.

Reconstruction of atmospheric trace metals pollution in Southwest China using sediments from a large and deep alpine lake: Historical trends, sources and sediment focusing

Atmospheric pollution, one of the leading environmental problems in South and East Asia, and its impact on the terrestrial environmental quality remain poorly understood particularly in alpine areas where both historical and present-day mining and smelting operations might leave an imprint. Here, we reconstructed atmospheric trace metals pollution during the past century using core sediments from a large and deep alpine lake in Southwest China. The implication of in lake and/or in watershed sediment focusing in pollution quantification is discussed by analyzing 15 sediment cores. Factor analysis and enrichment factor indicated Cd, Pb and Sb as the typical pollutants. Distinct peaks of Pb and Sb pollution were observed around the 1920s, but little Pb pollution was detected in recent decades, different from other studies in similar regions. Cadmium pollution was observed until the mid-1980s synchronized with Sb. The distinctive variations in atmospheric trace metal pollution process in Southwest China highlight the regional and sub-regional sources of metal pollutants, which should be primarily attributed to non-ferrous metal smelting emissions. Both natural and anthropogenic metals showed wide concentration ranges though exhibited similar temporal trends in the 15 cores. Spatial variations of anthropogenic metals were influenced by the in-watershed pollutants remobilization, whereas, natural metals were regulated by the detrital materials in the sub-basin. In-lake sediment focusing had little influence on the spatial distributions of all metals, different from the traditional sediment focusing pattern observed in small lakes. Anthropogenic Cd accumulation in sediments ranged from 1.5 to 10.1mgm−2 in a specific core with an average of 6.5mgm−2 for the entire lake, highlighting that a reliable whole-lake pollutant budget requires an analysis of multiple cores. Our study suggests that the management of aquatic ecosystem health should take the remobilization of in-watershed stored pollutants into consideration especially under increasing human perturbation.

Historical variations of atmospheric trace metal pollution in Southwest China: Reconstruction from a 150-year lacustrine sediment record in the Erhai Lake

A 35-cm long sediment core - retrieved from Erhai Lake - was analyzed for Pb isotope ratios (207Pb/206Pb and 208Pb/206Pb) and trace metal concentrations (Cr, Cu, Ni, Hg, Pb and Zn) to gain an understanding of atmospheric trace metal pollution over the last 150years in Southwest China. Core chronology was established by using the 210Pb and 137Cs dating techniques. Principal component analysis (PCA) and enrichment factors (EFs) were used to differentiate between the anthropogenic and detrital origins of the metals. The results indicate that the elements Hg, Pb and Zn in the sediment of Erhai Lake were affected by anthropogenic contamination. During the 1860s-1890CE, decreasing EFs of Hg, Pb and Zn and Pb isotope ratios suggest improving atmospheric quality, which may relate to the shrinking metallurgy activities during the late Qing Dynasty in Southwest China. Pollution levels of the metals remained stable during 1890–1960CE, whereas they increased after 1960CE, especially since the 1980CE, suggesting degradation of the regional atmospheric environment with the economic development after the reform and opening in the late 1970s. Pb isotopes and the PCA reveal that the atmospheric Pb is mainly from regional ore mining and smelting, which is also the dominant source of atmospheric Hg and Zn pollution in Southwest China. Our study also shows that the use of a pre-industrial background may underestimate the trace metal pollution in Erhai Lake due to the influence of early smelting activities.

Assessment of trace metal air pollution in Paris using slurry-TXRF analysis on cemetery mosses.

Mosses are useful, ubiquitous accumulation biomonitors and as such can be used for biomonitoring surveys. However, the biomonitoring of atmospheric pollution can be compromised in urban contexts if the targeted biomonitors are regularly disturbed, irregularly distributed, or are difficult to access. Here, we test the hypothesis that cemeteries are appropriate moss sampling sites for the evaluation of air pollution in urban areas. We sampled mosses growing on gravestones in 21 urban and peri-urban cemeteries in the Paris metropolitan area. We focused on Grimmia pulvinata (Hedwig) Smith, a species abundantly found in all studied cemeteries and very common in Europe. The concentration of Al, As, Br, Ca, Ce, Cl, Cr, Cu, Fe, K, Mn, Ni, V, P, Pb, Rb, S, Sr, Ti, and Zn was determined by a total reflection X-ray fluorescence technique coupled with a slurry sampling method (slurry-TXRF). This method avoids a digestion step, reduces the risk of sample contamination, and works even at low sample quantities. Elemental markers of road traffic indicated that the highest polluted cemeteries were located near the highly frequented Parisian ring road and under the influence of prevailing winds. The sites with the lowest pollution were found not only in the peri-urban cemeteries, adjoining forest or farming landscapes, but also in the large and relatively wooded cemeteries located in the center of Paris. Our results suggest that (1) slurry-TXRF might be successfully used with moss material, (2) G. pulvinata might be a good biomonitor of trace metals air pollution in urban context, and (3) cemetery moss sampling could be a useful complement for monitoring urban areas. Graphical abstract We tested the hypothesis that cemeteries are appropriate moss sampling sites for the evaluation of air pollution in urban areas. We sampled 110 moss cushions (Grimmia pulvinata) growing on gravestones in 21 urban and peri-urban cemeteries in the Paris metropolitan area. The concentration of 20 elements in mosses was determined by a total reflection X-ray fluorescence technique coupled with a slurry sampling method. Statistical analysis revealed that: - Urbanized Parisian areas crossed by traffic roads have the highest polluted cemeteries with a strong influence of main wind direction on the distribution of air pollutants - As expected, small cemeteries with low tree density were heavily polluted - Less obvious, large green spaces such as large cemeteries (Père Lachaise, Montmartre, Montparnasse) in the center of a dense metropolis like Paris present the same level of atmospheric trace metal pollution as cemeteries in less urbanized areas or nearing a very large forest. This suggests that even in densely urbanized areas, there is more spatial variability in pollution distribution than usually assumed and that large urban areas with low traffic and green filters such as trees are likely to intercept air pollutants.

Monitoring of Atmospheric Trace Metal Pollution in An Oil Producing Area of Akwa Ibom State, Nigeria Using Funaria Hygrometrica Moss

Monitoring of Atmospheric Trace Metal Pollution in An Oil Producing Area of Akwa Ibom State, Nigeria Using Funaria Hygrometrica Moss

Epiphytic lichen Flavoparmelia caperata as a sentinel for trace metal pollution

Widely spread lichen specie Flavoparmelia caperata is used in a biomonitoring study for atmospheric trace metal pollution in natural ecosystems in Southeastern Serbia. The concentration and distribution pattern of 21 metals in lichens were determined by inductively coupled plasma atomic emission spectrometry. The difference observed between metal deposition in peripheral and central parts of lichen thalli reflected air quality changes in the last and previous years. These findings were confirmed with principal component analysis. Our study demonstrated the accumulation of Ba, K, Mg, Na, Tl and Zn in peripheral parts of thalli, while As, B, Cd, Cr, Cu, Fe, Ga, In, Li, Ni, Pb and Se were concentrated in central parts of thalli.

BBQ charcoal combustion as an important source of trace metal exposure to humans

To provide information about charcoal combustion as an important source of atmospheric trace metal pollution, 11 charcoal products were combusted and PM 10 filter samples were collected. The PM-bound metal elements were extracted by microwave acid digestion and analyzed by ICP-AES. The concentrations of trace metal elements ranged from a few to 10 5 ng m −3 in the following order of magnitude: Zn > Pb > Mg > Ba > Cu > V > Cr > Co > Cd > Ni > Mn > Se > As. Emissions of most elements from charcoal combustion were high compared to other sources. In case of Cd, Co, and Ni, their concentrations exceeded the inhalation minimum risk levels (MRLs) of the United States Agency for Toxic Substances and Disease Registry (US-ATSDR) for chronic duration exposure by a factor of 30, 3.9, and 2.2, respectively. Likewise, Cd levels exceeded the US-ATSDR MRLs for acute-duration exposure by a factor of 10, while those of Pb and Cd exceeded air quality guideline (AQG) of the World Health Organization (WHO) by a factor of 29 and 59, respectively. Mn levels also exceeded the United States Environmental Protection Agency (US EPA) Reference Air Concentrations (RfCs) by a factor of 2.7. This study shows that barbecue charcoal combustion can be an important source of trace metal emissions to the atmosphere with potential health risks.

Tracing of Industrial Aerosol Sources in an Urban Environment Using Pb, Sr, and Nd Isotopes

A comprehensive Pb-Sr-Nd isotope tracer study of atmospheric trace metal pollution has been performed in the urban environment of Strasbourg-Kehl. Filter dust of the principal pollutant sources (waste incinerators, thermal power plant and steel plant) and soot of car and ship exhausts have been analyzed. In addition tree barks (as biomonitors) and PM10 have been analyzed to trace and determine the distribution of the pollution in the environment. The industrial sources have highly variable epsilonNd values (-9.7 and -12.5 for incinerators and -17.5 for steel plant). Much higher epsilonNd values have been found for soot of car exhausts (-6 and -6.9). These high values make the Nd isotope system a powerful tool for the discrimination of traffic emissions but especially for the identification of diesel derived particles in the urban environment. The 206Pb/207Pb isotope ratios of gasoline are low (1.089) compared to diesel soot (1.159). The 26Pb/207Pb ratios of 1.151-1.152 for the steel plant and 1.152 for the solid waste incinerator are close to the Pb isotope ratio of diesel. The 87Sr/ 8Sr isotope ratios of the principal industrial sources vary significantly: 0.7095 for the domestic solid waste incinerator, 0.709 for the steel plant, and 0.7087 for car exhaust soot. PM10 aerosols collected in the urban center of Strasbourg show the influence of the pollutant sources at 3-7 km distance from the center. Most of the aerosols Pb isotopic compositions suggest Pb admixtures from at least three sources: a natural background and in function of the wind direction the domestic waste incinerator (S-wind) or the steel plant and the chemical waste incinerator (NE-wind). The traffic contribution can only be estimated with help of Nd isotopes. Therefore the clear identification of different pollutant sources in the urban environment is only possible by combining the three different isotope systems and is based on the fact that significant differences exist between the Pb, Sr, and Nd isotope ratios of the natural atmospheric background and pollutants containing Pb, Sr, and Nd of industrial origin with similar variable 206Pb/207Pb, 87Sr/ 86Sr, and 143Nd/144Nd.

Contribution to biomonitoring of some trace metals by deciduous tree leaves in urban areas

Leaves of the deciduous tree species, horse chestnut (Aesculus hippocastanum L.) and Turkish hazel (Corylus colurna L.) were used as accumulative biomonitors of trace metal pollution in the urban area of Belgrade. Using differential pulse anodic stripping voltametry, trace metal concentrations (Pb, Cu, Zn, Cd) were determined at the single leaf level (ten leaves per species, per month), during two successive years with markedly different atmospheric level of trace metals. Increased trace metal concentrations in the leaves of A. hippocastanum reflected elevated atmospheric trace metal pollution, whereas C. colurna L. did not respond accordingly. The contents of Pb and Zn in soil over the same period also followed this trend. Anatomical analyses, in young as well as in old leaves of both species, indicated typical foliar injuries of plants exposed to stressful air conditions. Water relations that correspond to leaf age may have contributed to the considerable trace metal accumulation in leaves.

REE characteristics and Pb, Sr and Nd isotopic compositions of steel plant emissions

A comprehensive Pb-Sr-Nd isotope and REE tracer study of atmospheric trace metal pollution by a steel plant situated to the north of the urban communities of Strasbourg (France) and Kehl (Germany) has been performed using tree barks as biomonitors. The 206Pb/207Pb and 208Pb/207Pb isotopic ratios of the steel plant's filter dust are similar to values found in dust of waste incinerators. The 87Sr/86Sr ratio is similar to present-day ratios of Phanerozoic or Precambrian granitic rocks. The 143Nd/144Nd isotopic composition is very low and corresponds to an (Nd) value of -17.5. Such a low value is characteristic of old Precambrian granitic rocks and banded iron formations. Thus, this low (Nd) value might point to the origin of the iron necessary for the steel production. The fact, that this isotopic composition does not occur in crustal rocks of Western Central Europe makes the Nd isotope ratio a powerful tool to trace steel plants atmospheric emissions. The rare earth element (REE) distribution pattern of the steel plant's filter dust shows very specific fractionations like La and Nd enrichments which are traceable in tree barks over a distance of 4 km. The Pb, Sr and Nd isotope ratios not only enable the steel plant's emissions to be traced in a north-easterly direction, along the principal wind pathway but also enables the interference of this emission at 4 km NE from the steel plant with another atmospheric component originating from the Strasbourg Rhine harbour to be identified.

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As = Cu > Mo > Pb > V > Co > Cr > Zn; lichen samples in the order: Mo > Cu > As = Co = Ni > V > Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.

Locally generated atmospheric trace metal pollution in Canadian Arctic as reflected by chemistry of snowpack samples from the MacKenzie delta region

Snowpack samples from 18 sites located in the vicinity of the MacKenzie delta town of Inuvik (68° 22′N, 133° 42′W) were collected in the winter of 1985–1986 and analyzed for trace metals (Pb, Zn, V, Ni, Cu, Cd) and particulate material load. The results of the analyses, combined with data pertaining to the local emissions, were used to determine major sources of trace metal pollution, its magnitude and spatial distribution. High concentrations of trace metals and particulate material were detected in samples collected in close proximity to emission sources (power plant, automobile emissions, refuse incineration). Out of town, the concentrations rapidly decreased with distance and approached order of concentration typical for remote northern regions at ca 20 km from Inuvik. In all the samples, the trace metals were enriched with respect to crustal material. The level of enrichment was exceptionally high in samples collected in the town, where it far exceeded the levels reported for other northern regions. Mass balance calculations have shown that most of the trace metals emitted by the local sources are transported outside the immediate vicinity of Inuvik.