Pressure Dielectric Barrier Discharge Research Articles

New perspectives of atmospheric pressure dielectric barrier discharges for the deposition of thin films: From uncontrolled amorphous plasma-polymer layers to chemically patterned and crystalline (in)organic coatings

New perspectives of atmospheric pressure dielectric barrier discharges for the deposition of thin films: From uncontrolled amorphous plasma-polymer layers to chemically patterned and crystalline (in)organic coatings

Surface modification of fabrics using dielectric barrier discharge plasma for improved antifouling performance

Abstract Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintain their key advantages like comfort, softness, and stretchability. Herein, an atmospheric pressure dielectric barrier discharge (DBD) plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDS) as the precursor. The results showed the successful grafting of PFDS groups on the surface of silk fabrics without causing damage. Meanwhile, the gas temperature is rather low during the whole processing procedure, suggesting the non-equilibrium characteristics of DBD plasma. The influence of processing parameters on fabrics was systematically investigated, like the PFDS concentration, plasma treatment time, and plasma discharge power. An optimum processing condition was determined to be PFDS concentration: 8 wt%, plasma processing time: 40 s, and plasma power: 11.87 W. However, with the prolonged plasma processing time or enhanced plasma power, the plasma-grafted PFDS films could be degraded. Further study revealed that plasma processing of silk fabrics with PFDS would lead to the change of their chemical composition and surface roughness. As a result, the surface energy of the fabrics was reduced, accompanied by the improved water and oil repellency properties as well as enhanced antifouling performance. Besides, the plasma-grafted PFDS films also had good durability and stability. By extending the fabrics to polyester and wool against different oil-/water-based stains, the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics. This work provides a guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.

Electric field components within a micro-scaled DBD measured by Stark shifting and splitting of helium lines

Abstract Atmospheric pressure dielectric barrier discharges (DBDs), such as the micro cavity plasma array (MCPA), have emerged as promising technologies for the conversion of volatile gases. These conversion processes’ effectiveness can be enhanced by integrating catalytically active surfaces. To deepen the understanding of the plasma-catalyst interaction, it is crucial to study the transport dynamics of charged species to the catalytic surface, which, due to collisions with neutrals, also directly affects the transport of reactive species to the catalyst. Thereby the transport of the charged species is in particular influenced by the electric field perpendicular to the catalytic surface. However, experimental data on the component-wise electric field strength within SDBDs are rare. To address this issue, we performed polarized optical emission spectroscopy on the shifting and splitting of the allowed 492.19 nm (1D → 1P0) and forbidden 492.06 nm (1F0 → 1P0) helium line pair. This diagnostic approach requires a non-radially symmetric geometry, which leads to an adapted reactor design of the MCPA allowing the side-on observation of the discharge. The discharge operates in pure helium at atmospheric pressure, utilizing a triangular excitation voltage with a frequency of 15 kHz and an amplitude of 600 V. We performed phase-resolved measurements of the electric field components with a temporal resolution of 1 µs. Our results revealed an electric field strength of approximately 22 kV cm−1 for the component perpendicular to the dielectric surface, while the component parallel to the dielectric surface is about 5 kV cm−1 larger during the decreasing potential phase of the applied voltage.

Reliable plasmonic biosensing with atmospheric pressure dielectric barrier discharge oxygen plasma treated polydimethylsiloxane microfluidic channels

Polydimethylsiloxane (PDMS) has emerged as a popular choice of material for many microfluidic and flexible sensing devices despite its inherent hydrophobic nature. Here, we report on the use of atmospheric pressure dielectric barrier discharge (APDBD) oxygen (O2) plasma in the development of hydrophilic and protein repulsive PDMS microchannels for plasmonic sensing application. The effect of plasma treatment on the wettability, surface energy and hydrophilicity retention capacity of PDMS was determined using contact angle measurements. The PDMS sample exposed to low-power DBD O2 plasma for 6 min demonstrated lowest contact angle of 35.15˚, surface energy of 62.83 mN/m and hydrophilicity retention capacity of more than 50 days in Phosphate Buffered Saline (PBS). The treatment of PDMS with plasma induces surface hydrophilicity due to the introduction of polar functional groups as evinced by Fourier Transform Infrared (FTIR) analysis without compromising the bulk structure and optical properties of PDMS which were confirmed by X-Ray Diffraction (XRD) and Ultraviolet-visible (UV-Vis) Spectroscopic measurements. The plasma treated PDMS was used in the construction of a microfluidic Surface Plasmon Resonance (SPR) biosensor which demonstrated very low detection limits of 7.13 ng/ml, 5.91 ng/ml and 1.47 ng/ml and high sensitivities of 16.8˚/(µg/ml), 13.5˚/(µg/ml) and 16.65˚/(µg/ml) against anti-Human Immunoglobulin-G protein raised in mouse, goat and rabbit respectively. The obtained results infer that APDBD O2 plasma is a promising technique to render PDMS hydrophilic suited for reliable microfluidic based plasmonic biosensing applications.

Evolutionary distribution and mode transition in medium frequency from 50 kHz to 5 MHz of argon atmospheric pressure dielectric barrier discharge plasma

Dielectric barrier discharges (DBDs) provide a promising technology for generating non-equilibrium cold plasmas at atmospheric pressure. For both application-focused and fundamental research, it is important to explore the discharge mode transition and electron heating mechanism to enable effective independent tuning of key plasma parameters in a DBD system. In this work, we report numerical studies of the effects of single-frequency excitation on atmospheric argon DBDs, which are carried out in the medium driving frequency (MF) range from 50 kHz to 5 MHz by using a one-dimensional hydrodynamics coupling model. The spatio-temporal evolution of particle density associated with the discharge mode transition and electron dynamic behavior has been investigated. By tuning different components of a single frequency, we observe the electron heating behaviors of the individual modes and mode transitions from the Townsend discharge to the glow discharge in the low frequency to the Ω mode and the hybrid mode in the medium frequency to the α-mode and the γ-mode in the radio frequency. The physical analysis is understood based on these fundamental insights into the plasma physics.

Bayesian Optimization of Low-Temperature Nonthermal Plasma Jet Sintering of Nanoinks.

In response to the escalating demand for flexible devices in applications such as wearables, sensors, and touch panels, there is a need for innovative fabrication approaches for devices made from nanomaterial-based inks. Subsequent to ink deposition, a pivotal stage in device manufacturing typically involves high-temperature sintering, posing challenges for heat-sensitive substrates. Nonthermal plasma jet sintering utilizing an atmospheric pressure dielectric barrier discharge (DBD) plasma jet enables sintering at room temperature and standard pressure, facilitating the sintering of printed nanoparticle films without compromising substrate or film surface integrity. However, determining optimal plasma jet sintering conditions can be challenging due to multiple processing variables with intricate interrelationships. This work employed Bayesian optimization (BO) and machine learning (ML) to identify optimal values for seven primary plasma jet sintering variables. Optimization yielded a 99.2% increase in the measured electrical conductivity for plasma jet-sintered indium tin oxide (ITO) films after five rounds of experiments. Moreover, the optimal sintering conditions achieved an electrical conductivity that was 81.4% of conventional furnace sintering at 300 °C, but was three times faster and with a peak substrate temperature below 47 °C. This result demonstrates the prospect of applying BO to optimize processing techniques for emerging low-temperature requirements.

Surface Modification of Cellulose Films By Dielectric Barrier Discharge for Organic Photovoltaics Encapsulation

Organic photovoltaics (OPV) are the third generation of solar cells and are more and more attractive for industrial applications. OPV present numerous advantages, such as flexibility, low cost, light weight, large-area production.[1,2] Nonetheless, OPV are not as efficient as the conventional crystalline silicon photovoltaic (PV) cells. Recently, power conversion efficiency (PCE) has reached 18% for OPV, while conventional PV remains around 30% [3]. In this sense, additional works are necessary to improve their processability. Moreover, components of OPV are highly sensitive to water or oxygen, which strongly affect OPV stability in time when used in harsh conditions. Therefore, development of new barrier coatings are today essential to reduce OPV degradation and increase their shelf life. According to the literature, encapsulation can be performed following three strategies: (i) glass-glass encapsulation, (ii) flexible polymer lamination and (iii) thin film direct deposition. Glass-glass encapsulation provides great protection, with good optical properties but it remains fragile and is not compatible with roll-to-roll processes. On the other hand, although, flexible polymer lamination is suitable for roll-to-roll processes, adhesion between the front and back barriers is still complex to deal with, leading sometimes to partial encapsulation, thus increasing OPV degradation. Finally, direct deposition allows to obtain thin films with excellent optical and oxygen and humidity barrier properties. To date, most of thin layers are synthesized under vacuum [1,2]. This work focus on the development new barrier coatings at atmospheric pressure, compatible with roll-to-roll processes using cellulose nanofibrils with excellent oxygen barrier properties [4]. Being hydrophilic, the surface of cellulose nanofibrils have been modified to improve the water barrier properties. Wettability modification (WCA ~ 140°) was successfully achieved with an atmospheric pressure dielectric barrier discharge to control the fragmentation/reticulation of 2,4,6,8-Tetramethylcyclotetrasiloxane (TMCTS).

Engineering Water-Lotus-like Iridium-Cobalt Carbonate Hydroxides on Plasma-Treated Carbon Fibers for Enhanced Electrocatalytic Oxygen Evolution.

The sluggish kinetics of the oxygen evolution reaction (OER) in alkaline water electrolysis remains a significant challenge for developing high-efficiency electrocatalytic systems. In this study, we present a three-dimensional, micrometer-sized iridium oxide (IrO2)-decorated cobalt carbonate hydroxide (IrO2-P-CoCH) electrocatalyst, which is engineered in situ on a carbon cloth (CC) substrate pretreated with atmospheric-pressure dielectric barrier discharge (DBD) plasma (PCC). The electrocatalyst features petal-like structures composed of nanosized rods, providing abundant reactive areas and sites, including the oxygen vacancy caused by the air-DBD plasma. As a result, the IrO2-P-CoCH/PCC electrocatalyst demonstrates an outstanding OER performance, with overpotentials of only 190 and 300 mV required to achieve current densities of 10 mA cm-2 (j10) and 300 mA cm-2 (j300), respectively, along with a low Tafel slope of 48.1 mV dec-1 in 1.0 M KOH. Remarkably, benefiting from rich active sites exposed on the IrO2-P-CoCH (Ir) heterostructure, the synergistic effect between IrO2 and CoCH enhances the charge delivery rates, and the IrO2-P-CoCH/PCC exhibits a superior electrocatalytic activity at a high current density (300 mV/j300) compared to the commercial benchmarked RuO2/PCC (470 mV/j300). Furthermore, the IrO2-P-CoCH/PCC electrocatalyst shows exceptional OER stability, with a mere 1.3% decrease with a current density of j10 for 100 h testing, surpassing most OER catalysts based on CC substrates. This work introduces a novel approach for designing high-performance OER electrocatalysts on flexible electrode substrates.

Improvement of adsorption properties of coconut shell activated carbon using atmospheric pressure dielectric barrier discharge plasma jet

Improvement of adsorption properties of coconut shell activated carbon using atmospheric pressure dielectric barrier discharge plasma jet

LIF measurement in a partially saturated and partially absorbed regime

The problems of laser-induced fluorescence (LIF) measurements in a partially saturated regime with spatially dependent laser intensity in the sample (caused by absorption) are analyzed. The obtained equations are tested by means of LIF of free tellurium atoms in a plasma of an atmospheric pressure dielectric barrier discharge (DBD) by comparing fluorescence and absorption measurements. The results show a high reliability of LIF measurements.

Photofragmentation laser-induced fluorescence imaging of CH3 by structured illumination in a plasma discharge.

Methyl is crucial in plasma-assisted hydrocarbon chemistry, making precise in situ imaging essential for understanding various plasma applications. Its importance in methane chemistry arises from its role as a primary byproduct during the initial phase of methane dehydrogenation. Detecting the CH3 radical is challenging due to its high reactivity and the prevalence of strongly pre-dissociative electronically excited states. To address this, photofragmentation planar laser-induced fluorescence (PF-LIF) techniques have been developed. These involve laser-induced photodissociation of the CH3 radical into CH fragments, which are then probed using another laser. This method allows for both temporally and spatially resolved measurements. However, quantifying the signal from photofragmented species is complicated by the overlap with naturally occurring CH fragments. We employ PF-LIF with structured illumination to distinguish photofragmented species from naturally occurring ones using a frequency-sensitive lock-in technique. This methodology is demonstrated in an atmospheric pressure dielectric barrier discharge (DBD) containing argon and methane, enabling spatially and temporally resolved data acquisition of the CH3 radical. This approach facilitates interference-free PF-LIF measurements of methyl in various applications.

Optical emission characterization of an atmospheric pressure dielectric barrier discharge in nitrogen: Evolution of CN emissions during PTFE etching

AbstractThe present work investigates the etching of coated polytetrafluoroethylene (PTFE) films using an atmospheric pressure dielectric barrier discharge operating in nitrogen in a filamentary regime. For different treatment durations, the optical emission spectra were recorded over time. Most of the emissions are attributed to the N2 second positive system. The presence of CN is also observed, and its emissions rise with the exposure time of PTFE. This rise is attributed to the density of CN produced. The X‐ray photoelectron spectroscopy surface characterization suggests two etching regimes. This is linked with a change in slope in the intensity evolution of the optical emissions of the CN. At longer times, a fluorinated deposit on the electrode is observed, confirming a different nature of the etched material.

The contribution of electrode spacing and operating voltage on the time-resolved optical emission spectra of atmospheric-pressure air and Ar DBD plasma

This paper reports the optical characterization of a controlled atmospheric-pressure dielectric barrier discharge (DBD) plasma source in air and Ar environments. In this study, Ar flow rate is held constant at 1 L/min while the operating voltages varied from 6.5 kV to 12.7 kV. Under these conditions, a calibrated commercial compact spectrometer covering the range from 200 to 850 nm was used to record the emission spectra of DBD plasma operating at different voltages, gap distances, and gas types. Using the Boltzmann distribution, we calculated the electron density ( n e ) and excitation temperatures in the plasma of air and Ar DBD at 2 mm gap distance . The emission spectra lines of the hydroxyl radicals (OH), N 2 , and Ar ions are acquired at different operating conditions. According to the findings, the light intensity of Ar DBD is significantly higher than that of air DBD under the same conditions of operation. The intensity of the generated plasma spectrum is also shown to rise with both an increase in the input voltage and a decrease in the gap distance. The measurements also showed that the average temperature of the excited electrons is around 1.1 eV for air DBD and 0.11 eV for Ar DBD, while n e for both is on the order of 10 16 cm − 3 . These results show that as the working voltage increases, the plasma changes from a filamentary state to a homogeneous mode. Knowing the DBD parameters increases its chance to compete with traditional methods in many fields, such as water, polymers, and biomedical treatments.

Aging effect on surface chemistry and sorption properties of atmospheric pressure plasma treated lignocellulosic jute fibers

Jute fibers are characterized by a heterogeneous chemical composition (cellulose and non-cellulosic components) and a complex layered structure with a hydrophobic surface outer layer responsible for their low wettability. In this work, after the removal of water-soluble components, raw jute fibers were subjected to atmospheric pressure dielectric barrier discharge (DBD) under different conditions (at 150 or 300 Hz) to tailor jute fiber surface structure and wettability. The research was focused on the aging effect during natural aging in a standard atmosphere investigated up to three weeks after DBD treatment. Alterations in the surface morphology of DBD-treated jute fibers were investigated by FE-SEM and AFM, while ATR-FTIR, XPS, and electrokinetic measurements were used to assess the changes in the jute fiber surface chemistry. Sorption properties were monitored through wetting time and capillary rise measurements. The sorption properties of DBD-treated jute fibers were improved (about 100 times lower wetting time and 15 % higher capillary rise height in comparison to untreated) due to the changes in surface chemistry (decreased lignin and hemicellulose content in parallel with cellulose oxidation) and morphology (about 4.6 times higher average roughness). The electrokinetic and sorption properties measurement confirmed the significance of aging effects in lignocellulosic fibers' functionalization using plasma.

Ambient ionization mass spectrometry provides screening of selective androgen receptor modulators

Ambient ionization mass spectrometry allows for analysis of samples in their natural state, i.e., with no sample pre-treatment. It can be viewed as a fast, simple, and economical analysis, but its main disadvantages include a lower analytical performance due to the presence of complex sample matrix and the lack of chromatographic separation prior to the introduction of the sample into the mass spectrometer. Here we present an application of two ambient ionization mass spectrometry techniques, i.e., Desorption Atmospheric Pressure Photoionization and Dielectric Barrier Discharge Ionization, for the analysis of known Selective Androgen Receptor Modulators, which represent common compounds of abuse in professional and semiprofessional sport. Eight real samples of illegal food supplements, seized by the local law enforcement, were used to test the performance of the ambient mass spectrometry and the results were validated against a newly developed targeted LC-UV-MS/MS method performed in multiple reaction monitoring mode with an external calibration for each analyte. In order to decide whether or not the compound can be declared as present, we proposed a system of rules for the interpretation of the obtained spectra. The criteria are based on mass spectrum matching (5–10 ppm accuracy from the theoretical exact mass and a correct isotopic pattern), duration of the mass signal (three or five consecutive scans, depending on the instrumentation used), and intensity above the background noise (threefold increase in intensity and absolute intensity above 5E4 or 1E5, depending on the instrumentation). When applying these criteria, good agreement was found between the tested methods. Ambient ionization techniques were effective at detecting SARMs at pharmacologically relevant doses, i.e., approximately above 1 mg per capsule, although they may fail to detect lower levels or isomeric species. It is demonstrated that when adhering to a set of clear and consistent rules, ambient mass spectrometry can be employed as a qualitative technique for the screening of illegal SARMs with sufficient confidence and without the necessity to perform a regular LC-MS analysis.

Surface activation of viscose textiles via air, argon, and oxygen dielectric barrier discharge plasma: influence of peak voltage

This paper discusses the use of atmospheric pressure dielectric barrier discharge (DBD) plasma treatment to enhance the surface qualities of viscose fabrics. The study explores the effects of different plasma gases, discharge voltages, and exposure times on the treated fabrics. The findings emphasize the importance of optimizing the plasma’s peak voltage to achieve the desired surface treatment outcomes. The document also presents data on colour strength, wettability, colour fastness, and tensile strength of the treated fabrics, as well as scanning electron microscopy (SEM) analysis of surface morphology and chemical analysis using fourier- transition infrared spectroscopy (FTIR) and energy dispersive X-ray (EDX). The results show that treatment at a peak voltage of 11.83 kV is more efficient, except for the tensile strength which is enhanced at a peak voltage of 8.92 kV. The oxygen plasma treatment significantly improves the colour strength, which exhibits an increase from 11 to 18. The intensified colour was attributed to the significant influence of electrostatic interactions between the charged hydroxyl groups of the oxygen plasma treated viscose textiles and the dye molecules, which enhance the printability. The oxygen DBD plasma exhibits a higher ability to enhance the properties of textiles when compared to air and argon plasmas. This study presents a sustainable, economical, secure, and ecologically friendly approach to explore new fabrics for specific uses.

Characterization of OH species in kHz air/H2O atmospheric pressure dielectric barrier discharges

This work numerically studies densities and reaction mechanisms of OH species generated in atmospheric–pressure air dielectric barrier discharges with the model validated by experiments. The power consumption is measured, and the number of microdischarges (MDs) generated within a half period is captured by an intensified charge-coupled device (CCD) camera. The OH densities of cases with various H2O concentrations are measured using ultraviolet absorption spectroscopy. The numerical model integrating the 1.5D discharge fluid model and 3D background gas model (BGM) is adopted to predict the MD behavior and the generation of species related to OH generation. The simulated OH densities cover the range of 1.1 × 1019 and 1.6 × 1019 m−3 in the cases studied, agreeing with those measured. The simulated results show that most OH radicals are generated in MDs, while the reactive section contributes around 2% of the total OH generation. The detailed analysis shows that atomic oxygen (O(1D) and O) and O3 contribute most of the OH generation in the MDs. In contrast, the self-association reactions (i.e. 2OH + M → H2O2 + M and 2OH → O + H2O) and NO x species consume more than 64% of OH radicals generated in MDs. In the BGM, it is interesting to find that reactive species NO x play significant roles in both the OH generation and depletion in the reactive section. The distributions of species related to the OH species obtained by the BGM are presented to elucidate the detailed chemistry of OH species in the reactive section.

Degradation of Toxins Derived from Foodborne Pathogens by Atmospheric-Pressure Dielectric-Barrier Discharge.

Foodborne diseases can be attributed not only to contamination with bacterial or fungal pathogens but also their associated toxins. Thus, to maintain food safety, innovative decontamination techniques for toxins are required. We previously demonstrated that an atmospheric-pressure dielectric-barrier discharge (APDBD) plasma generated by a roller conveyer plasma device is effective at inactivating bacteria and fungi in foods. Here, we have further examined whether the roller conveyer plasma device can be used to degrade toxins produced by foodborne bacterial pathogens, including aflatoxin, Shiga toxins (Stx1 and Stx2), enterotoxin B and cereulide. Each toxin was spotted onto an aluminum plate, allowed to dry, and then treated with APDBD plasma applied by the roller conveyer plasma device for different time periods. Assessments were conducted using a competitive enzyme-linked immunosorbent assay (ELISA) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The results demonstrate a significant time-dependent decrease in the levels of these toxins. ELISA showed that aflatoxin B1 concentrations were reduced from 308.6 µg/mL to 74.4 µg/mL within 1 min. For Shiga toxins, Stx1 decreased from 913.8 µg/mL to 65.1 µg/mL, and Stx2 from 2309.0 µg/mL to 187.6 µg/mL within the same time frame (1 min). Enterotoxin B levels dropped from 62.67 µg/mL to 1.74 µg/mL at 15 min, and 1.43 µg/mL at 30 min, but did not display a significant decrease within 5 min. LC-MS/MS analysis verified that cereulide was reduced to below the detection limit following 30 min of APDBD plasma treatment. Taken together, these findings highlight that a range of foodborne toxins can be degraded by a relatively short exposure to plasma generated by an APDBD using a roller conveyer device. This technology offers promising advancements in food safety, providing a novel method to alleviate toxin contamination in the food processing industry.

Air disinfection by nanosecond pulsed DBD plasma

Atmospheric pressure dielectric barrier discharge (DBD) plasma is an emerging and promising technique for air disinfection in public environments. Power supply is a crucial factor but it remains unclear about its impacts on the air disinfection performance of plasmas. In this work, a nanosecond (ns) pulsed power supply was applied to drive an in-duct grating-like DBD array to achieve fast single-pass air disinfection. The influence of pulse parameters and environmental factors on both the discharge characteristics and the single-pass bacterial inactivation efficiency were uncovered. At a close relative humidity (RH) level, the efficiency was dominated by the discharge power, namely, specific input energy could serve as the disinfection dose. A higher frequency, shorter pulse rising time, and suitable pulse width are preferred to obtain a higher Z value. The pulsed source was not notably superior to an alternating current source, or even worse at a low voltage frequency at the same discharge power. Airflow humidity was a predominant factor to improve the efficiency and a single-pass efficiency of ∼ 99% and a Z value of 2.2 L/J were achieved under an optimal RH of 50%–60%. This work provides fundamental knowledge of ns-pulsed DBD on discharge characteristics and air disinfection behaviors.

Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis

Plasma catalysis is a rapidly growing field, often employing a packed-bed dielectric barrier discharge plasma reactor. Such dielectric barrier discharges are complex, especially when a packing material (e.g., a catalyst) is introduced in the discharge volume. Catalysts are known to affect the plasma discharge, though the underlying mechanisms influencing the plasma physics are not fully understood. Moreover, the effect of the catalysts on the plasma discharge and its subsequent effect on the overall performance is often overlooked. In this work, we deliberately design and synthesize catalysts to affect the plasma discharge in different ways. These Ni or Co alumina-based catalysts are used in plasma-catalytic dry reforming of methane and ammonia synthesis. Our work shows that introducing a metal to the dielectric packing can affect the plasma discharge, and that the distribution of the metal is crucial in this regard. Further, the altered discharge can greatly influence the overall performance. In an atmospheric pressure dielectric barrier discharge reactor, this apparently more uniform plasma yields a significantly better performance for ammonia synthesis compared to the more conventional filamentary discharge, while it underperforms in dry reforming of methane. This study stresses the importance of analyzing the plasma discharge in plasma catalysis experiments. We hope this work encourages a more critical view on the plasma discharge characteristics when studying various catalysts in a plasma reactor.