Asymmetric Addition Of Trimethylsilyl Cyanide Research Articles

Chiral Iron(II) NPPN Complexes: Synthesis and Application in the Asymmetric Strecker Reaction of Azomethine Imines

The open-chain NPPN ligand (1S,1′S)-1,1′-((ethane-1,2-diylbis(phenylphosphanediyl))bis(2,1-phenylene))bis(N-cyclohexylmethanimine) (1) was prepared by condensation of cyclohexylamine with enantiomerically pure (1S,1′S)-2,2′-(ethane-1,2-diylbis(phenylphosphanediyl))dibenzaldehyde ((S,S)-6). Ligand 1 coordinates to [Fe(OH2)6](BF4)2 or [Fe(MeCN)6](SbF6)2 in acetonitrile to give the dicationic complex [Fe(MeCN)2(1)](X)2 (2) (X = BF4– or SbF6–). The corresponding carbonyl (3), bromocarbonyl (4), and bis(tert-butylisonitrile) (5) derivatives were prepared and fully characterized. Complex 2 reacts with Me3SiCN to give the corresponding trimethylsilyl isocyanide derivative 18 featuring a Fe–CNSiMe3 linkage. The X-ray structures of 2, 3, 5, and 18 show that ligand 1 assumes the Λ-cis-α geometry, which allows comparing the trans influence of these ligands. Complexes 2, 3, 5, and 18 were applied in the asymmetric addition of trimethylsilyl cyanide to azomethine imines (Strecker reaction), whose enantioselectivity re...

Asymmetric Addition of Cyanide to β‐Nitroalkenes Catalysed by Chiral Salen Complexes of Titanium(IV) and Vanadium(V)

Structurally well-defined bimetallic titanium(IV) (salen) and monometallic vanadium(V) (salen) complexes have been used as catalysts for the asymmetric addition of trimethylsilyl cyanide to β-nitroalkenes to produce chiral nitronitriles with ee values in the range of 79–89 % and conversions up to 100 % at 0 °C. The reaction conditions (solvent, temperature, time and vanadium complex counter-ion) were optimised, and it was shown that the catalyst loading could be significantly reduced (20 to 2 mol %) and the reaction temperature increased (−40 to 0 °C) compared to previous studies that used an in situ prepared catalyst. The results are compared and contrasted with previous results obtained by using the same catalysts for the asymmetric addition of trimethylsilyl cyanide to aldehydes, and a transition-state structure for the asymmetric addition of trimethylsilyl cyanide to nitroalkenes is proposed to account for the observed stereochemistry.

Asymmetric cyanohydrin synthesis using an aluminium(salan) complex

The asymmetric addition of trimethylsilyl cyanide to aldehydes catalysed by chiral metal(salan) complexes has been investigated. Salan complexes of titanium and vanadium displayed only low catalytic activity, but a bimetallic aluminium(salan) complex gave high levels of catalytic activity and reasonable asymmetric induction when used with triphenylphosphine oxide as a cocatalyst. Mechanistic studies showed that the reactions were first order in catalyst and aldehyde concentrations, but zero order in trimethylsilyl cyanide and triphenylphosphine oxide concentrations. A Hammett analysis indicated that there was no significant change in the electron density at the aldehyde benzylic position during the rate determining step of the catalytic cycle. On the basis of the kinetic data, a catalytic cycle is proposed which accounts for the differences observed between [Al(salen)]2O and [Al(salan)]2O based catalysts.

Fine Modification of Salen Ligands – Effects on the Salen–Ti‐Catalyzed Asymmetric Cyanosilylation of Aldehydes

AbstractNew bifunctional N‐oxide salen–TiIV complexes and a pyrrolidine salen–TiIV complex in combination with achiral N‐oxide were developed and applied to the asymmetric addition of trimethylsilyl cyanide to aldehydes. Notably, both enantiomers of trimethylsilyl ethers of cyanohydrins could be easily prepared by modifying the catalysts employed in this reaction, which are based on the same chiral diamine collar derived from L‐tartaric acid. The products were obtained generally with moderate to good enantiomeric excesses and excellent yields by using relatively low catalyst loadings and only 1.05 equivalents of trimethylsilylcyanide (TMSCN).

A practical Ti-salen catalyst based on dimeric salen ligand for asymmetric addition of trimethylsilyl cyanide to aldehydes

Abstract A dimeric salen ligand derived from L-tartaric acid was synthesized through linking two salen units with 1,6-dibromohexane. The corresponding Ti complex was proved to be an efficient catalyst for asymmetric addition of trimethylsilyl cyanide to aldehydes, providing the corresponding optically active trimethylsilyl ether of cyanohydrins with moderate to good enantiomeric excesses and excellent yields under relatively low catalyst loading condition.

Investigation of Lewis Acid versus Lewis Base Catalysis in Asymmetric Cyanohydrin Synthesis

The asymmetric addition of trimethylsilyl cyanide to aldehydes can be catalysed by Lewis acids and/or Lewis bases, which activate the aldehyde and trimethylsilyl cyanide, respectively. It is not always apparent from the structure of the catalyst whether Lewis acid or Lewis base catalysis predominates. To investigate this in the context of using salen complexes of titanium, vanadium and aluminium as catalysts, a Hammett analysis of asymmetric cyanohydrin synthesis was undertaken. When Lewis acid catalysis is dominant, a significantly positive reaction constant is observed, whereas reactions dominated by Lewis base catalysis give much smaller reaction constants. [{Ti(salen)O}(2)] was found to show the highest degree of Lewis acid catalysis, whereas two [VO(salen)X] (X=EtOSO(3) or NCS) complexes both displayed lower degrees of Lewis acid catalysis. In the case of reactions catalysed by [{Al(salen)}(2)O] and triphenylphosphine oxide, a non-linear Hammett plot was observed, which is indicative of a change in mechanism with increasing Lewis base catalysis as the carbonyl compound becomes more electron-deficient. These results suggested that the aluminium complex/triphenylphosphine oxide catalyst system should also catalyse the asymmetric addition of trimethylsilyl cyanide to ketones and this was found to be the case.

ChemInform Abstract: Structure/Enantioselectivity Study of the Asymmetric Addition of Trimethylsilylcyanide to Benzaldehyde Catalyzed by Ti(IV)-Schiff Base Complexes.

In the presence of titanium tetraisopropoxide, tridentate salen ligands derived from cis-1-amino-2-indanol have been utilized in the asymmetric addition of trimethylsilylcyanide to benzaldehyde, which gave the cyanohydrins in up to 85% ee. We have examined the reaction of titanium tetraisopropoxide with these salen ligands by NMR spectrometry and X-ray crystallography. Reaction of ligands derived from salicylaldehydes with bulky substituents in the 3-position with titanium tetraisopropoxide gave the L*Ti(O-i-Pr)2 complexes, which are the proposed precatalysts in the asymmetric addition reaction. These ligands give good to very good enantioselectivity in the asymmetric trimethylsilylcyanation reaction. However, with groups smaller than tert-butyl in the 3-position, substantial amounts (up to 73%) of the catalytically inactive L2*Ti species are formed, resulting in large drops in the ee's of the cyanohydrins. The L2*Ti species were formed as mixtures of diastereomers, one of which has been characterized by ...

Lithium salts of chiral metallocomplex anions as catalysts for asymmetric trimethylsilylcyanation of aldehydes

A series of the anionic CoIII complexes based on optically active amino acids containing the lithium cation in the external sphere of the complex was synthesized. The synthesized compounds were used as catalysts in the asymmetric addition of trimethylsilyl cyanide to aldehydes. The influence of the temperature, catalyst concentration, and modification of the chiral anion structure on the enantioselectivity of catalysis was studied.

Mechanistic comparison of aluminium based catalysts for asymmetric cyanohydrin synthesis

A kinetic analysis of the asymmetric addition of trimethylsilyl cyanide to benzaldehyde using three aluminium based catalysts has been carried out. All three catalysts displayed rate equations, which were first order in trimethylsilyl cyanide concentration and zero order in benzaldehyde concentration. The results are consistent with a common mechanism for effective asymmetric catalysis of cyanohydrin synthesis, involving combined activation of the aldehyde by a Lewis acid and activation of the trimethylsilyl cyanide by a Lewis base. The mechanistic analysis was also applied to a magnesium-based catalyst system to demonstrate its general applicability.

A bimetallic aluminium(salen) complex for asymmetric cyanohydrin synthesis

In the presence of a phosphine oxide cocatalyst, a bimetallic aluminium(salen) complex was found to catalyse the asymmetric addition of trimethylsilyl cyanide to aldehydes. Under optimised conditions, enantioselectivities of 53–96% were obtained using 2 mol % of the catalyst. An analysis of the reaction kinetics showed that the reactions exhibited first-order kinetics, with the rate of reaction being independent of the aldehyde concentration.

Mechanism‐Guided Development of VO(salen)X Complexes as Catalysts for the Asymmetric Synthesis of Cyanohydrin Trimethylsilyl Ethers

Catalyze this! Detailed study of the mechanism of asymmetric cyanohydrin synthesis catalyzed by VO(salen)X complexes (see figure) led to the development of VO(salen)NCS, as the most active vanadium-based catalyst yet developed for this reaction.The mechanism by which oxovanadium(V)(salen) complexes(1) VO(salen)X catalyze the asymmetric addition of trimethylsilyl cyanide to benzaldehyde has been studied. The reaction kinetics indicated that the structure of the counterion (X) had a significant influence on the rate, but not on the enantioselectivity of the reaction. The less coordinating the counterion, the lower the catalytic activity; a trend that was confirmed by a Hammett analysis. Variable temperature kinetics allowed the enthalpies and entropies of activation to be determined for some catalysts, and showed that, for others, the overall reaction order changes from second order to zero order as the temperature is reduced. The order with respect to the catalyst was determined for nine of the VO(salen)X complexes and showed that the less active catalysts were active predominantly as mononuclear species whilst the more active catalysts were active predominantly as dinuclear species. Mass spectrometry confirmed the formation of dinuclear species in situ from all of the VO(salen)X complexes and indicated that the dinuclear complexes contained one vanadium(V) and one vanadium(IV) ion. The latter conclusion was supported by cyclic voltammetry of the complexes, by fluorescence measurements and by the fact that catalyst deactivation occurs when reactions are carried out under an inert atmosphere. Based on this evidence, it has been deduced that the catalysis involves two catalytic cycles: one for catalysis by mononuclear VO(salen)X species and the other for catalysis by dinuclear species. The catalytic cycle involving dinuclear species involves activation of both the cyanide and aldehyde, whereas the catalytic cycle involving mononuclear species activates only the aldehyde, thus explaining the higher catalytic activity observed for catalysts which are predominantly active as dinuclear complexes. Based on these mechanistic results, two new VO(salen)X complexes (X=F and NCS) were predicted to form highly active catalysts for asymmetric cyanohydrin synthesis. VO(salen)NCS was indeed found to be the most active catalyst of this type and catalyzed the asymmetric addition of trimethylsilyl cyanide to thirteen aldehydes. In each case, high yields and enantioselectivities were obtained after a reaction time of two hours at room temperature using just 0.1 mol % of the catalyst.

Synthesis of chiral polydentate ligands and the use of their titanium complexes as pre-catalysts for the asymmetric trimethylsilylcyanation of benzaldehyde

A number of polydentate ligands based on enantiomerically pure binaphthol have been synthesized. The ligand complexes with titanium isopropoxide were used as catalysts for the asymmetric addition of trimethylsilyl cyanide to benzaldehyde. A fragment with axial chirality is responsible for the configuration of O-trimethylsilyl cyanohydrin product. In the case of the optimum ligand based on (R)-binaphthol and (S)-leucinol, an enantiomeric excess of 86% and quantitative yield were achieved in 4 h.

Titanium(IV)(salen) and Vanadium(V)(salen) Complexes Derived fromC2- andC1-Symmetric Diamines for Asymmetric Cyanohydrin Synthesis

Titanium and vanadium salen complexes have been prepared from C 2 - and Ci-symmetric acyclic diamines. All of the complexes catalysed the asymmetric addition of trimethylsilyl cyanide to benzaldehyde and the sense of asymmetric induction was determined by the nature of the substituents. The vanadium complex of a valine-derived diamine gave good results with a range of aromatic and aliphatic aldehydes.

Asymmetric cyanohydrin synthesis using heterobimetallic catalysts obtained from titanium and vanadium complexes of chiral and achiral salen ligands

Titanium(IV)(salen) and vanadium(V)(salen) complexes are both known to form catalysts for asymmetric cyanohydrin synthesis. When a mixture of titanium and vanadium complexes derived from the same or different salen ligands is used for the asymmetric addition of trimethylsilyl cyanide to benzaldehyde, the absolute configuration of the product and level of asymmetric induction can only be explained by in situ formation of a catalytically active heterobimetallic complex, and is not consistent with two monometallic species acting cooperatively. Combined use of complexes containing chiral and achiral salen ligands demonstrates that during the asymmetry inducing step of the mechanism, the aldehyde is coordinated to the vanadium rather than the titanium ion. The titanium complexes also catalyse the asymmetric addition of ethyl cyanoformate to aldehydes, a reaction in which vanadium(V)(salen) complexes are not active. For this reaction, use of a mixture of titanium and vanadium(salen) complexes results in a complete loss of catalytic activity, a result which again can only be explained by in situ formation of a heterometallic complex. Both the titanium and vanadium based catalysts also induce the asymmetric addition of potassium cyanide/acetic anhydride to aldehydes. For this reaction, combined use of chiral and achiral complexes indicates that during the asymmetry inducing step of the mechanism, the aldehyde is coordinated to titanium rather than vanadium, a result which contrasts with the observed results when trimethylsilyl cyanide is used as the cyanide source.

Asymmetric Addition of Trimethylsilyl Cyanide to Aldehydes Promoted by Chiral Polymeric Vanadium(V) Salen Complex as an Efficient and Recyclable Catalyst.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

Asymmetric addition of trimethylsilyl cyanide to aldehydes promoted by chiral polymeric vanadium(V) salen complex as an efficient and recyclable catalyst

The asymmetric addition of trimethylsilyl cyanide to various aldehydes catalyzed by efficient new vanadyl polymeric salen complexes having 12 repeating salen units was investigated at room temperature. An excellent yield of the trimethylsilylether of cyanohydrins (up to 98%) with high chiral induction (96%) in case of 2-methylbenzaldehyde was achieved in 18 h. The catalyst recovered four times with retention of its performance.

Chiral Ti(IV) complexes of hexadentate Schiff bases as precatalysts for the asymmetric addition of TMSCN to aldehydes and the ring opening of cyclohexene oxide

Chiral dinuclear titanium(IV) complexes (generated in situ from hexadentate Schiff bases and titanium tetra-isopropoxide) have been found to be more effective catalysts for the asymmetric addition of trimethylsilyl cyanide to aldehydes and the ring opening of cyclohexene oxide than their mononuclear analogues. The best results were obtained for benzaldehyde (86% enantiomeric excess) and cyclohexene oxide (89% enantiomeric excess).

Asymmetric Cyanosilylation of Aldehydes Catalyzed by Novel Chiral Tetraaza-Titanium Complexes

The asymmetric addition of trimethylsilyl cyanide (TMSCN) to a range of aldehydes was efficiently catalyzed by a novel, easily prepared C 2 -symmetric chiral tetraaza-Ti(IV) complex in high yields with up to 92% ee under mild conditions. A negative nonlinear effect between the ee of the ligand and the ee of the product was observed.

Asymmetric Addition of Trimethylsilyl Cyanide to Ketones Catalyzed by Al(salen)/triphenylphosphine Oxide.

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

Salicylaldehyde Schiff bases derived from 2-ferrocenyl-2-amino alcohols. Part 1: New chiral ligands for the titanium-catalyzed enantioselective cyanation of aldehydes

The condensation of a set of diversely substituted ( S)-2-amino-2-ferrocenyl ethanol derivatives 1a– e with the salicylaldehydes 5A– C resulted in the generation of a small library of new chiral Schiff base-ligands, whose titanium isopropoxide complexes have been tested as catalysts in the asymmetric addition of trimethylsilyl cyanide to aldehydes. The enantioselectivity of the reaction is strongly influenced (a) by the substitution pattern of the 2-amino-2-ferrocenyl ethanol moiety, and (b) by the nature of the C 3′ substituent in the salicylaldehyde. Computational modelling of the intermediate transition state complexes (based on the Schiff base, benzaldehyde, isopropoxide and cyanide bonded to titanium) show that the experimental results can be accommodated by a careful analysis of the steric interactions between the 2-aminoethanol and salicylaldehyde moieties, and the metal-coordinated aldehyde.