Artificial Intelligence-based Models Research Articles

Establishment and validation of an artificial intelligence-based model for real-time detection and classification of colorectal adenoma

Colorectal cancer (CRC) prevention requires early detection and removal of adenomas. We aimed to develop a computational model for real-time detection and classification of colorectal adenoma. Computationally constrained background based on real-time detection, we propose an improved adaptive lightweight ensemble model for real-time detection and classification of adenomas and other polyps. Firstly, we devised an adaptive lightweight network modification and effective training strategy to diminish the computational requirements for real-time detection. Secondly, by integrating the adaptive lightweight YOLOv4 with the single shot multibox detector network, we established the adaptive small object detection ensemble (ASODE) model, which enhances the precision of detecting target polyps without significantly increasing the model's memory footprint. We conducted simulated training using clinical colonoscopy images and videos to validate the method's performance, extracting features from 1148 polyps and employing a confidence threshold of 0.5 to filter out low-confidence sample predictions. Finally, compared to state-of-the-art models, our ASODE model demonstrated superior performance. In the test set, the sensitivity of images and videos reached 87.96% and 92.31%, respectively. Additionally, the ASODE model achieved an accuracy of 92.70% for adenoma detection with a false positive rate of 8.18%. Training results indicate the effectiveness of our method in classifying small polyps. Our model exhibits remarkable performance in real-time detection of colorectal adenomas, serving as a reliable tool for assisting endoscopists.

Development and validation of an artificial intelligence-based model for detecting urothelial carcinoma using urine cytology images: a multicentre, diagnostic study with prospective validation

Urine cytology is an important non-invasive examination for urothelial carcinoma (UC) diagnosis and follow-up. We aimed to explore whether artificial intelligence (AI) can enhance the sensitivity of urine cytology and help avoid unnecessary endoscopy. In this multicentre diagnostic study, consecutive patients who underwent liquid-based urine cytology examinations at four hospitals in China were included for model development and validation. Patients who declined surgery and lacked associated histopathology results, those diagnosed with rare subtype tumours of the urinary tract, or had low-quality images were excluded from the study. All liquid-based cytology slides were scanned into whole-slide images (WSIs) at 40×magnification and the WSI-labels were derived from the corresponding histopathology results. The Precision Urine Cytology AI Solution (PUCAS) was composed of three distinct stages (patch extraction, features extraction, and classification diagnosis) and was trained to identify important WSI features associated with UC diagnosis. The diagnostic sensitivity was mainly used to validate the performance of PUCAS in retrospective and prospective validation cohorts. This study is registered with the ChiCTR, ChiCTR2300073192. Between January 1, 2018 and October 31, 2022, 2641 patients were retrospectively recruited in the training cohort, and 2335 in retrospective validation cohorts; 400 eligible patients were enrolled in the prospective validation cohort between July 7, 2023 and September 15, 2023. The sensitivity of PUCAS ranged from 0.922 (95% CI: 0.811-0.978) to 1.000 (0.782-1.000) in retrospective validation cohorts, and was 0.896 (0.837-0.939) in prospective validation cohort. The PUCAS model also exhibited a good performance in detecting malignancy within atypical urothelial cells cases, with a sensitivity of over 0.84. In the recurrence detection scenario, PUCAS could reduce 57.5% of endoscopy use with a negative predictive value of 96.4%. PUCAS may help to improve the sensitivity of urine cytology, reduce misdiagnoses of UC, avoid unnecessary endoscopy, and reduce the clinical burden in resource-limited areas. The further validation in other countries is needed. National Natural Science Foundation of China; Key Program of the National Natural Science Foundation of China; the National Science Foundation for Distinguished Young Scholars; the Science and Technology Planning Project of Guangdong Province; the National Key Research and Development Programme of China; Guangdong Provincial Clinical Research Centre for Urological Diseases.

Applications of artificial intelligence algorithms in artificial lift systems: A critical review

In the oil and gas industry, the implementation of an artificial lift system is utilized to enhance the extraction of hydrocarbons from a reservoir that has depleted its natural energy. This can be achieved by employing pumps such as positive-displacement or centrifugal downhole pumps, or by injecting gas into the well tubing to reduce liquid hydrostatic pressure and improve fluid flow towards the surface. Recently, artificial intelligence-based algorithms have emerged as the leading approach for modelling various artificial lift parameters and problems. Consequently, there has been a renewed interest in understanding the role and effectiveness of different computational algorithms used in the artificial lift system domain. While there is an extensive body of literature on this subject, no prior research has effectively consolidated the findings from various artificial lift system domains, underscoring the need for an all-encompassing review. The purpose of this review is to create a guide that serves as a framework that helps scholars identify knowledge gaps and suggest novel ideas that would enhance the workings of artificial lift systems in the oil and gas industry. This article presents the first comprehensive analysis of artificial intelligence applications in five key areas of artificial lift systems in the oil and gas industry namely: prediction of oil and gas flow rates in artificial lift wells, prediction of artificial lift system failures, selection of artificial lift systems, parameter optimization, and the application of soft sensing technologies in artificial lift systems. The research studies pertaining to each of these areas were systematically identified from the existing literature, and their main features were highlighted. To ensure the uniqueness and novelty of this work, a critical evaluation of the artificial lift articles in each broad area was conducted. The review outcomes were then presented in clear tables that highlighted the main features of each study. Findings from the study indicate that artificial intelligence models are prevalent in almost every aspect of artificial lift systems, and the number of articles on this topic continues to grow. Some of these models have even been field tested and proven effective in improving artificial lift system operations and reducing costs. However, there is need to enhance the explicitness and interpretability of some of the predictive models by including vital details, to enhance seamless implementation and easy deployment in the field. This work will be valuable for industry operators, researchers, and students who seek a guide or reference material on artificial intelligence-based models for artificial lift systems.

Machine learning methods for predicting CO2 solubility in hydrocarbons

The application of carbon dioxide (CO2) in enhanced oil recovery (EOR) has increased significantly, in which CO2 solubility in oil is a key parameter in predicting CO2 flooding performance. Hydrocarbons are the major constituents of oil, thus the focus of this work lies in investigating the solubility of CO2 in hydrocarbons. However, current experimental measurements are time-consuming, and equations of state can be computationally complex. To address these challenges, we developed an artificial intelligence-based model to predict the solubility of CO2 in hydrocarbons under varying conditions of temperature, pressure, molecular weight, and density. Using experimental data from previous studies, we trained and predicted the solubility using four machine learning models: support vector regression (SVR), extreme gradient boosting (XGBoost), random forest (RF), and multilayer perceptron (MLP). Among four models, the XGBoost model has the best predictive performance, with an R2 of 0.9838. Additionally, sensitivity analysis and evaluation of the relative impacts of each input parameter indicate that the prediction of CO2 solubility in hydrocarbons is most sensitive to pressure. Furthermore, our trained models were compared with existing models, demonstrating higher accuracy and applicability of our models. The developed machine learning-based models provide a more efficient and accurate approach for predicting CO2 solubility in hydrocarbons, which may contribute to the advancement of CO2-related applications in the petroleum industry.

Clinical Prediction Models for Prognosis of Colorectal Liver Metastases: A Comprehensive Review of Regression-Based and Machine Learning Models.

Colorectal liver metastasis (CRLM) is a disease entity that warrants special attention due to its high frequency and potential curability. Identification of "high-risk" patients is increasingly popular for risk stratification and personalization of the management pathway. Traditional regression-based methods have been used to derive prediction models for these patients, and lately, focus has shifted to artificial intelligence-based models, with employment of variable supervised and unsupervised techniques. Multiple endpoints, like overall survival (OS), disease-free survival (DFS) and development or recurrence of postoperative complications have all been used as outcomes in these studies. This review provides an extensive overview of available clinical prediction models focusing on the prognosis of CRLM and highlights the different predictor types incorporated in each model. An overview of the modelling strategies and the outcomes chosen is provided. Specific patient and treatment characteristics included in the models are discussed in detail. Model development and validation methods are presented and critically appraised, and model performance is assessed within a proposed framework.

Artificial intelligence-based model for predicting the minimum inhibitory concentration of antibacterial peptides against ESKAPEE pathogens.

In response to environmental threats, pathogens make several changes in their genome, leading to antimicrobial resistance (AMR). Due to AMR, the pathogens do not respond to antibiotics. Amongst drug-resistant pathogens, the ESKAPEE group of bacteria poses a major threat to humans, and therefore World Health Organization has given them the highest priority status. Antibacterial peptides (ABPs) are a family of peptides found in nature that play a crucial role in the innate immune systems of organisms. These ABPs offer several advantages over widely used antibiotics. As a result, they have recently received a lot of attention as potential replacements for currently available antibiotics. But it is expensive and time-consuming to identify ABPs from natural sources. Thus, wet lab researchers employ various tools to screen promising ABPs rapidly. However, the main limitation of the existing tools is that they do not provide the minimum inhibitory concentration values against the ESKAPEE pathogens for the identified ABP. To address this, in the current work, we developed ESKAPEE-MICpred, a two-input model that utilizes transfer learning and ensemble learning techniques. The concept of ensemble learning was realized by combining the decisions provided by deep learning algorithms, whereas the concept of transfer learning was realized by utilizing pretrained amino acid embeddings. The proposed model has been deployed as a web server at https://eskapee-micpred.anvil.app/ to aid the scientific community.

Synergizing LED Technology and Hydropriming for Intelligent Modeling and Mathematical Expressions to Optimize Chickpea Germination and Growth Indices

AbstractThe influence of hydropriming and Light Emitting Diodes (LED) on germination and growth indices, followed by optimizing and validation via artificial intelligence-based models was carried out in this research. White LEDs (W-LEDs) were more effective by yielding the most effective growth indices, such as mean germination time (MGT) (1.11 day), coefficient of variation of germination time (CVt) (20.72%), mean germination rate (MR) (0.81 day−1), uncertainty (U) (0.40 bit), and synchronization (Z values) (0.79); the optimum MGT (1.09 day), CVt (15.97%), MR (0.77 day−1), U (0.32 bit), and Z (0.55) values were found after 2 h of hydropriming, which was responsible for all efficient growth indicators. W-LEDs with 1 h hydropriming proved to be the ideal LED and hydropriming combination. Results on growth indices for in vitro seedlings were completely different from those on germination indices, and the most desirable germination indices were linked to red LEDs (R-LEDs). Whereas 4 h hydropriming was most effective for the post-germination process. Pareto charts, normal plots, contour plots, and surface plots were created to optimize the input variables. Finally, the data were predicted using Arificial Neural Network (ANN) inspired multilayer perceptron (MLP) and machine learning-based random forest (RF) algorithms. For both models, plant height was correlated with maximum R2 values. Whereas, all output variables had relatively low mean absolute error (MAE), mean square error (MSE), and mean absolute percentage error (MAPE) scores, indicating that both models performed well. The results of this investigation disclosed a link between certain LEDs and hydropriming treatment for in vitro germination indices and plant growth. Graphical Abstract Graphical presentation of actual and predicted values for germination indices in chickpea

A Multimodal Transformer Model for Recognition of Images from Complex Laparoscopic Surgical Videos.

The determination of the potential role and advantages of artificial intelligence-based models in the field of surgery remains uncertain. This research marks an initial stride towards creating a multimodal model, inspired by the Video-Audio-Text Transformer, that aims to reduce negative occurrences and enhance patient safety. The model employs text and image embedding state-of-the-art models (ViT and BERT) to assess their efficacy in extracting the hidden and distinct features from the surgery video frames. These features are then used as inputs for convolution-free Transformer architectures to extract comprehensive multidimensional representations. A joint space is then used to combine the text and image features extracted from both Transformer encoders. This joint space ensures that the relationships between the different modalities are preserved during the combination process. The entire model was trained and tested on laparoscopic cholecystectomy (LC) videos encompassing various levels of complexity. Experimentally, a mean accuracy of 91.0%, a precision of 81%, and a recall of 83% were reached by the model when tested on 30 videos out of 80 from the Cholec80 dataset.

Abstract 4945: Computational modeling-based discovery of novel anticancer drug candidates targeting centromere-associated protein E

Abstract Purpose: Centromere-associated protein E (CENP-E), a mitotic motor protein, is crucial for cell division. Inhibition of CENP-E can lead to chromosome misalignment and aneuploidy. Our recent studies revealed that the CENP-E inhibitor (CENP-Ei), Compound A, induces aneuploid-mediated cGAS-STING pathway activation in cancer cell lines, which is expected to trigger innate immune response and induce immunological conversion of the tumor microenvironment from cold to hot. However, known CENP-Eis exhibited limited efficacy, and none have gone beyond phase I trials since 2012. The aim of this study is to develop a workflow integrating structure and artificial intelligence-based modeling approaches to accelerate the discovery of novel CENP-Eis with improved efficacy and overcome related challenges. Method: The inhibitor-bound CENP-E structure was modeled using chimeric homology modeling followed by induced fit docking with known CENP-Eis. Structure-based virtual screening (VS) was performed on large compound libraries in Enamine REAL, Synthetically Accessible Virtual Inventory, and MolPort databases. Consensus scoring methods were applied by averaging ranks of individual molecules obtained from VS against different CENP-E conformations. An active learning-enhanced VS pipeline was developed using ATOM Modeling PipeLine (AMPL) to find the best-ranked ligands more efficiently. CENP-E ligand candidates were further filtered based on their safety properties predicted by machine learning models trained with curated databases of adverse drug reactions using AMPL. The success of this study was measured by its ability to reveal novel chemotypes that could modulate CENP-E in kinesin ATPase assays. Result: Conformations of CENP-E’s ligand binding site were predicted for VS using the homology model. Structure-based VS was performed to select high-ranked compounds based on consensus scoring. The active learning-enhanced VS pipeline achieved 75% accuracy in ranking the top 20% of hit compounds. The graph convolutional network model with a ROCAUC, 0.76, was created using AMPL to filter ligand candidates based on their predicted safety properties. Seventy-three potential CENP-E ligands computationally prioritized from the Molport database were experimentally tested using kinesin ATPase assays from which 4 potential inhibitors and 8 potential activators were identified indicating overlapping binding sites of inhibitors and activators. Conclusion: Our integrated workflow is effective in discovering novel CENP-E modulators. The discovery of CENP-E activators provides an opportunity to identify novel therapeutics in hepatocellular carcinoma malignancies known to experience decreased CENP-E activity leading to aneuploidy. The predictions generated by computational models combined with experimental validations could further accelerate anticancer drug discovery. Citation Format: Pinyi Lu, Ryo Kamata, Michael R. Weil, Naomi Ohashi, Akihiro Ohashi, Eric A. Stahlberg. Computational modeling-based discovery of novel anticancer drug candidates targeting centromere-associated protein E [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 4945.

Developing a New ANN Model to Estimate Daily Actual Evapotranspiration Using Limited Climatic Data and Remote Sensing Techniques for Sustainable Water Management

Accurate estimations of actual evapotranspiration (ETa) are essential to various environmental issues. Artificial intelligence-based models are a promising alternative to the most common direct ETa estimation techniques and indirect methods by remote sensing (RS)-based surface energy balance models. Artificial Neural Networks (ANNs) are proven to be suitable for predicting reference evapotranspiration (ETo) and ETa based on RS data. This study aims to develop a methodology based on ANNs for estimating daily ETa values using NDVI and land surface temperature, coupled with limited site-specific climatic variables in a large irrigation catchment. The ANN model has been applied to the two different scenarios. Data from only the 38 days of satellite overpass dates was selected in Scenario I, while in Scenario II all datasets, i.e., the 769-day data were used. An irrigation scheme, located in the Mediterranean region of Turkiye, was selected, and a total of 38 Landsat images and local climatic data collected in 2021 and 2022 were used in the ANN model. The ETa results by the ANN model for Scenarios I and II showed that the R2 values for training (0.79 and 0.86), testing (0.75 and 0.81), and the entire dataset (0.76 and 0.84) were all remarkably high. Moreover, the results of the new ANN model in two scenarios showed an acceptable agreement with ETa-METRIC values. The proposed ANN model demonstrated the potential for obtaining daily ETa using limited climatic data and RS imagery. As a result, the suggested ANN model for daily ETa computation offers a trustworthy way to determine crop water usage in real time for sustainable water management in agriculture. It may also be used to assess how crop evapotranspiration in drought-prone areas will be affected by climate change in the 21st century.

Explainable 3D CNN based on baseline breast DCE-MRI to give an early prediction of pathological complete response to neoadjuvant chemotherapy

BackgroundSo far, baseline Dynamic Contrast-Enhanced Magnetic Resonance Imaging (DCE-MRI) has played a key role for the application of sophisticated artificial intelligence-based models using Convolutional Neural Networks (CNNs) to extract quantitative imaging information as earlier indicators of pathological Complete Response (pCR) achievement in breast cancer patients treated with neoadjuvant chemotherapy (NAC). However, these models did not exploit the DCE-MRI exams in their full geometry as 3D volume but analysed only few individual slices independently, thus neglecting the depth information. MethodThis study aimed to develop an explainable 3D CNN, which fulfilled the task of pCR prediction before the beginning of NAC, by leveraging the 3D information of post-contrast baseline breast DCE-MRI exams. Specifically, for each patient, the network took in input a 3D sequence containing the tumor region, which was previously automatically identified along the DCE-MRI exam. A visual explanation of the decision-making process of the network was also provided. ResultsTo the best of our knowledge, our proposal is competitive than other models in the field, which made use of imaging data alone, reaching a median AUC value of 81.8%, 95%CI [75.3%; 88.3%], a median accuracy value of 78.7%, 95%CI [74.8%; 82.5%], a median sensitivity value of 69.8%, 95%CI [59.6%; 79.9%] and a median specificity value of 83.3%, 95%CI [82.6%; 84.0%], respectively. The median and CIs were computed according to a 10-fold cross-validation scheme for 5 rounds. ConclusionFinally, this proposal holds high potential to support clinicians on non-invasively early pursuing or changing patient-centric NAC pathways.

Synthetic Data Improve Survival Status Prediction Models in Early-Onset Colorectal Cancer.

In artificial intelligence-based modeling, working with a limited number of patient groups is challenging. This retrospective study aimed to evaluate whether applying synthetic data generation methods to the clinical data of small patient groups can enhance the performance of prediction models. A data set collected by the Cancer Registry Library Project from the Yonsei Cancer Center (YCC), Severance Hospital, between January 2008 and October 2020 was reviewed. Patients with colorectal cancer younger than 50 years who started their initial treatment at YCC were included. A Bayesian network-based synthesizing model was used to generate a synthetic data set, combined with the differential privacy (DP) method. A synthetic population of 5,005 was generated from a data set of 1,253 patients with 93 clinical features. The Hellinger distance and correlation difference metric were below 0.3 and 0.5, respectively, indicating no statistical difference. The overall survival by disease stage did not differ between the synthetic and original populations. Training with the synthetic data and validating with the original data showed the highest performances of 0.850, 0.836, and 0.790 for the Decision Tree, Random Forest, and XGBoost models, respectively. Comparison of synthetic data sets with different epsilon parameters from the original data sets showed improved performance >0.1%. For extremely small data sets, models using synthetic data outperformed those using only original data sets. The reidentification risk measures demonstrated that the epsilons between 0.1 and 100 fell below the baseline, indicating a preserved privacy state. The synthetic data generation approach enhances predictive modeling performance by maintaining statistical and clinical integrity, and simultaneously reduces privacy risks through the application of DP techniques.

Artificial intelligence-based model for predicting pulmonary arterial hypertension on chest x-ray images.

Pulmonary arterial hypertension is a serious medical condition. However, the condition is often misdiagnosed or a rather long delay occurs from symptom onset to diagnosis, associated with decreased 5-year survival. In this study, we developed and tested a deep-learning algorithm to detect pulmonary arterial hypertension using chest X-ray (CXR) images. From the image archive of Chiba University Hospital, 259 CXR images from 145 patients with pulmonary arterial hypertension and 260 CXR images from 260 control patients were identified; of which 418 were used for training and 101 were used for testing. Using the testing dataset for each image, the algorithm outputted a numerical value from 0 to 1 (the probability of the pulmonary arterial hypertension score). The training process employed a binary cross-entropy loss function with stochastic gradient descent optimization (learning rate parameter, α = 0.01). In addition, using the same testing dataset, the algorithm's ability to identify pulmonary arterial hypertension was compared with that of experienced doctors. The area under the curve (AUC) of the receiver operating characteristic curve for the detection ability of the algorithm was 0.988. Using an AUC threshold of 0.69, the sensitivity and specificity of the algorithm were 0.933 and 0.982, respectively. The AUC of the algorithm's detection ability was superior to that of the doctors. The CXR image-derived deep-learning algorithm had superior pulmonary arterial hypertension detection capability compared with that of experienced doctors.

Uncertainty quantification of the flexural strengthening of RC beams with UHPC using improved metaheuristic algorithm

This study presents an artificial intelligence-based model to predict the flexural strengthening of RC beam/slab strengthened with UHPC (RC-UHPC) and perform uncertainty quantification of such values. Improved eliminate particle swamp optimization hybridized artificial neural network (IEPANN) was a model developed on artificial neural network (ANN) optimized by improved-eliminate-particle-swamp optimization (IEPSO). Experimental datasets were used to establish the hybrid ML model. The efficiency of IEPANN was compared against support vector regression (SVR) and multiple linear regression (MLR). The IEPANN demonstrates outstanding performance over MLR and SVR. The flexural strengthening of RC-UHPC depends on materials and geometrical configurations, which have stochastic characteristics. Convergence studies, sensitivity, and probabilistic analyses were conducted on each random parameter. Simulation results indicated that strengthening configuration is the most sensitive to flexural strengthening. Systematic assessment of uncertainties in flexural strengthening may lead to a higher confidence level in model outcomes, and RC-UHPC is examined and designed. It enhances construction reliability.

Artificial intelligence-based forecasting model for incinerator in sulfur recovery units to predict SO2 emissions

Pollutant emissions from chemical plants are a major concern in the context of environmental safety. A reliable emission forecasting model can provide important information for optimizing the process and improving the environmental performance. In this work, forecasting models are developed for the prediction of SO2 emission from a Sulfur Recovery Unit (SRU). Since SRUs incorporate complex chemical reactions, first-principle models are not suitable to predict emission levels based on a given feed condition. Accordingly, artificial intelligence-based models such as standard machine learning (ML) algorithms, multi-layer perceptron (MLP), long short-term memory (LSTM), one-dimensional convolution (1D-CNN), and CNN-LSTM models were tested, and their performance was evaluated. The input features and hyperparameters of the models were optimized to achieve maximum performance. The performance was evaluated in terms of mean squared error (MSE) and mean absolute percentage Error (MAPE) for 1 h, 3 h and 5 h ahead of forecasting. The reported results show that the CNN-LSTM encoder-decoder model outperforms other tested models, with its superiority becoming more pronounced as the forecasting horizon increased from 1 h to 5 h. For the 5-h ahead forecasting, the proposed model showed a MAPE advantage of 17.23%, 4.41%, and 2.83%, respectively over the 1D-CNN, Deep LSTM, and single-layer LSTM models in the larger dataset.

Management of patients with muscle-invasive bladder cancer with clinical evidence of pelvic lymph node metastases.

Identification of clinically positive pelvic lymph node metastases (cN+) in patients with muscle-invasive bladder cancer is currently challenging, as the diagnostic accuracy of available imaging modalities is limited. Conventional CT is still considered the gold-standard approach to diagnose lymph node metastases in these patients. The development of innovative diagnostic methods including radiomics, artificial intelligence-based models and molecular biomarkers might offer new perspectives for the diagnosis of cN+ disease. With regard to the treatment of these patients, multimodal strategies are likely to provide the best oncological outcomes, especially using induction chemotherapy followed by radical cystectomy and pelvic lymph node dissection in responders to chemotherapy. Additionally, the use of adjuvant nivolumab has been shown to decrease the risk of recurrence in patients who still harbour ypT2-T4a and/or ypN+ disease after surgery. Alternatively, the use of avelumab maintenance therapy can be offered to patients with unresectable cN+ tumours who have at least stable disease after induction chemotherapy alone. Lastly, patients with cN+ tumours who are not responding to induction chemotherapy are potential candidates for receiving second-line treatment with pembrolizumab.

Agroeconomic Indexes and Big Data: Digital Marketing Analytics Implications for Enhanced Decision Making with Artificial Intelligence-Based Modeling

Agriculture firms face an array of struggles, most of which are financial; thus, the role of decision making is discerned as highly important. The agroeconomic indexes (AEIs) of Agriculture Employment Rate (AER), Chemical Product Price Index (CPPI), Farm Product Price Index (FPPI), and Machinery Equipment Price Index (MEPI) were selected as the basis of this study. This research aims to examine the connection between digital marketing analytics and the selected agroeconomic indexes while providing valuable insights into their decision-making process, with the utilization of AI (artificial intelligence) models. Thus, a dataset of website analytics was collected from five well-established agriculture firms, apart from the values of the referred indexes. By performing regression and correlation analyses, the index relationships with the agriculture firms’ digital marketing analytics were extracted and used for the deployment of the fuzzy cognitive mapping (FCM) and hybrid modeling (HM) processes, assisted by using artificial neural network (ANN) models. Through the above process, there is a strong connection between the agroeconomic indexes of AER, CPPI, FPPR, and MEPI and the metrics of branded traffic, social and search traffic sources, and paid and organic costs of agriculture firms. It is highlighted that agriculture firms, to better understand their sector’s employment rate and the volatility of farming, chemicals, and machine equipment prices for future investment strategies and better decision-making processes, should try to increase their investment in the preferred digital marketing analytics and AI applications.

The state-of-the-art in the application of artificial intelligence-based models for traffic noise prediction: a bibliographic overview

The state-of-the-art in the application of artificial intelligence-based models for traffic noise prediction: a bibliographic overview

Artificial intelligence-based model for recurrence prediction after local excision on whole slide images in T1 low rectal cancer.

24 Background: According to current guidelines, patients with resected specimens showing high-risk features are recommended for additional surgery after local excision of T1 colorectal cancer, despite the low incidence (~7%) of recurrence. However, surgical resection in patients with low rectal cancer (RC) is challenging and may compromise anal function, leading to a low quality of life. To reduce unnecessary surgical resection for these patients, we utilized artificial intelligence to develop and validate a prediction model for the risk of recurrence in T1 low rectal cancer patients. Methods: H&E-stained whole slide images (WSIs) were scanned for local excision (endoscopically or transanally minimally) specimens of 507 consecutive patients with T1 low rectal cancers that were locally resected at 4 hospitals between 2005 and 2015. The area under the receiver operating characteristic curve (AUROC), specificity and sensitivity were used to evaluate the performance of the model for the risk of recurrence, and an external validation cohort was to verify the applicability of the model. Results: We constructed a prediction model using convolutional neural networks (CNN) without incorporating clinical features. The model yielded good discrimination and calibration, achieving a 5-year recurrence-free survival AUROC of 0.90 (95% confidence interval [CI]: 0.86–0.93), sensitivity of 0.91 (95% CI: 0.84–0.96), and specificity of 0.82 (95% CI: 0.78–0.88) through fivefold cross-validation. Additionally, the AI avoided 25.7% of unnecessary additional surgery compared to the current guidelines. Conclusions: We proposed a novel prediction model for the risk of recurrence in T1 low RC patients to assist physicians in determining whether additional surgery is required after local excision of T1 low RC.

Optimising customer retention: An AI-driven personalised pricing approach

Customer churn has become one of the most important challenges that telecom companies have to deal with. Churn cases not only cause revenue losses but also impose extra costs of finding new customers. To overcome this issue, they develop various strategies to retain their customers. In this regard, this study presents an integrated artificial intelligence-based model that can meet the expectations of these companies not only to profile the customer churn, but also to predict a service fee that is likely to be accepted by the customers. The model first identifies the customers who are likely to churn and then offers the customers a personalised service fee that is likely to be acceptable. In this study, the K-nearest neighbours, Decision Tree, Random Forest, and Support Vector Machine methods are adapted as classifiers for churn prediction, and regression models of the same methods are utilised to predict the most optimum “personalised” service fee for potential customer churns. Additionally, to reduce the cost of data collection for companies, the feature selection method is used to determine the most optimal feature subset in churn analysis and service fee prediction. The results show that the Random Forest method is superior to other methods in both churn and price predictions and has resulted in as much as a predictive accuracy of 94% and AUC of 98%. The outcome of this comprehensive analysis using four artificial intelligence methods over three diverse telecom datasets, suggests that the proposed “personalised” pricing model in the telecom sector could prevent the churn and increase the profitability by up to 36%. In addition, the model based on SVM suggests that it is possible to reduce the number of required data to be collected by as much as 20%. As the robustness and generalisation ability of the models has been demonstrated over three diverse data sets, it can be further adapted in different sectors.