Area Under The Disease Progress Curve Research Articles

Brown patch severity as affected by cool‐season turfgrass species, cultivar, and nitrogen rate

AbstractBrown patch (caused by various Rhizoctonia and Rhizoctonia‐like species) is a major summer disease for several cool‐season turfgrass species, including creeping bentgrass (CBG) (Agrostis stolonifera L.), colonial bentgrass (CLBG) (Agrostis capillaris L.), perennial ryegrass (PRG) (Lolium perenne L.), and turf‐type tall fescue (TTTF; [Schedonorus arundinaceus (Schreb.) Dumort., nom. cons.]). Elevated nitrogen (N) rates are suggested to enhance development of brown patch symptoms. A controlled environment study was conducted to determine the influence of two N rates among four cool‐season turfgrass species maintained at 1.9 cm after inoculation with R. solani. Field‐grown plants of four CBG cultivars, a CLBG cultivar, a PRG blend, and two TTTF cultivars were fertilized weekly, totaling 49 and 196 kg N ha−1 across four applications. Turfgrass responses were measured as relative growth rate, brown patch severity, and seasonal brown patch using area under the disease progress curve (AUDPC). On average, peak brown patch severity among the species and cultivars was between 22.6% and 68.1% for Raptor III TTTF and Penn A‐1 CBG, respectively. Turf‐type tall fescue cultivars decreased brown patch by 61% compared to CBG, CLBG, and PRG. The lower N rate reduced brown patch AUDPC by 17% and 33% for CBG and PRG, respectively, but N rate generally had no effect for CLBG and TTTF. These results reinforce the importance of planting disease‐resistant species and cultivars. Additionally, N rate may be an important factor affecting brown patch severity for select intensively managed turfgrass species.

Efficacy of chemical fungicides against the anthracnose disease caused by Colletotrichum gloeosporioides in Carica papaya fruits

The objective of this study was to evaluate severity, effectiveness, and the area under the disease progress curve (AUDPC) of chemical four fungicides (A+F=azoxystrobin + fludioxinil, C+F=cypronil + fludioxinil, B+P=boscalid + pyraclostrobin and T=tiabendazole) at 250, 500, 750, and 1000 ppm against Colletotrichum gloeosporioides in papaya. At 12 days after inoculation (dai) A+F achieved a range of effectiveness between 63.0 (250 ppm) to 77.52 (1000 ppm); while the range of effectiveness for T was 12.8% (250 ppm) to 74% (1000 ppm). Both fungicides achieved the highest effectiveness at 1000 ppm that C+F (38.5%) and B+P (55.6%). The AUDPC achieved the same value at the four studied concentration in A+F, C+F, and B+P. Only 750 and 1000 ppm of T achieved the lowest AUDPC than 250 and 500 ppm. In conclusion, A+F and T achieved adequate control of anthracnose in papaya fruits.

Effect of Fungicides and Application Intervals for the Control of Black Spot of Roses

The efficacy of the fungicide pydiflumetofen + difenoconazole (Postiva) was evaluated at varying application rates and intervals to control black spot disease (Diplocarpon rosae) in rose (Rosa spp. ‘Coral Drift’). Container-grown roses were arranged in a completely randomized design with five single-plant replications. Experiments were conducted under greenhouse and shade-house conditions (56% shade) in 2021/2022 and 2023. Black spot disease in roses was developed naturally. Pydiflumetofen + difenoconazole at 1.1 , 1.6, and 2.2 mL⋅L–1, and standard fungicide azoxystrobin + benzovindiflupyr (Mural) at 0.5⋅g L–1 were sprayed on foliage to runoff on a 2- or 4-week interval. Plants that were not treated with fungicide served as the controls. Plants were evaluated weekly for disease severity (0%–100% foliage affected) and defoliation (0%–100% defoliation). The season-long area under the disease progress curve (AUDPC) and area under the defoliation progress curve (AUDFC) were calculated for the evaluation period. Pydiflumetofen + difenoconazole reduced significantly black spot disease severity, AUDPC, defoliation, and AUDFC both in greenhouse and shade-house conditions compared with control plants, and was as effective as azoxystrobin + benzovindiflupyr. All the application rates and intervals of pydiflumetofen + difenoconazole were equally effective in reducing black spot severity and AUDPC. Our findings suggest that pydiflumetofen + difenoconazole at the lowest rate with the longest application interval is the most cost-effective, and has similar efficacy as treatments with higher rates and more frequent intervals.

Development and validation of a standard area diagram set to assess corn grey leaf spot severity and foliar fungicide control efficacy

AbstractGrey leaf spot (GLS), caused by Cercospora spp., has become a very important foliar disease for second‐crop corn season, mainly in South America. Therefore, this study aimed to develop and validate a standard area diagram set (SADs) to estimate the severity of GLS and to apply the SADs established in this study to evaluate the efficacy of fungicides for GLS control in field trials. The SADs with nine levels of severity (0.5; 2; 5; 10; 20; 30; 40; 50 and 60%) improved accuracy, precision and reliability. To evaluate the control of GLS in corn, two experiments spraying chemical fungicides were conducted, one in Rio Verde (GO) (experiment A) and another in Chapadão do Sul (MS) (experiment B). Both experiments were conducted in randomized block design, with 10 treatments and four replicates. For the severity assessment, the SADs elaborated in this study was used. From this severity data over time, disease progress curves, area under the disease progress curve (AUDPC), and yield were obtained. Based on the AUDPC and yield values, all treatments differed from the control. The fungicide fluxapyroxad + pyraclostrobin + mefentrifluconazole had the highest value, giving 72.8% control efficacy and the highest yield maintenance of 43.5%. The other treatments had an intermediate control efficacy and yield. The SADs proposed here is a useful tool for improving visual assessments of GLS severity on corn leaves and fungicides can be used for integrated disease management.

Characterization of Fusarium species causing head blight of highland barley (qingke) in Tibet, China

Most of the research on the characterization of Fusarium species focused on wheat, barley, rice, and maize in China. However, there has been limited research in highland barley (qingke). Recently, Fusarium head blight (FHB) of qingke was recently observed in Tibet, China, especially around the Brahmaputra River. To gain a better understanding of the pathogens involver, 201 Fusarium isolates were obtained from qingke samples in 2020. Among these isolates, the most abundant species was F. avenaceum (45.3 %), followed by F. equiseti (27.8 %), F. verticillioides (13.9 %), F. acuminatum (9.0 %), F. flocciferum (3.5 %), and F. proliferatum (0.5 %). The distribution of Fusarium species varied along the Brahmaputra River, with F. avenaceum being predominant in the midstream and downstream regions, while F. equiseti was more common in the upstream region. Chemical analyses of all the isolates revealed the production of different mycotoxins by various Fusarium species. It was found that enniatins were produced by F. acuminatum, F. avenaceum, and F. flocciferum, beauvericin (BEA) and fumonisins were produced F. proliferatum and F. verticillioides, and zearalenone (ZEN) and nivalenol (NIV) were produced by F. equiseti. Pathogenicity test showed that F. avenaceum was more aggressive in causing FHB compared to F. acuminatum, F. equiseti, and F. flocciferum. The disease severity, measured by the area under the disease progress curve (AUDPC), was significantly positively (P < 0.01) correlated with the concentration of total toxins produced by each species. Furthermore, all the Fusarium strains which were used for pathogenicity test were susceptible to carbendazim, and the 50 % effective concentration (EC50) ranged from 0.406 μg/mL to 0.673 μg/mL with an average EC50 of 0.551 ± 0.012 μg/mL.

The effect of quantitative wheat resistance on the aggressiveness of Fusarium graminearum.

Little is known about the selection pressures acting on plant pathogen populations, especially those applied by quantitative forms of resistance. Fusarium graminearum causes Fusarium Head Blight (FHB) in wheat, producing significant yield losses and mycotoxin contamination. Quantitative host resistance is the best method to control FHB. However, there needs to be more understanding of how disease resistance affects the evolution of plant pathogens. This study aimed to determine if the presence or absence of wheat resistance influenced the fitness components and genomic regions of F. graminearum. Thirty-one isolates from highly susceptible and 25 isolates from moderately resistant wheat lines were used. Isolate aggressiveness was measured by area under the disease progress curve (AUDPC), visually damaged kernels, and deoxynivalenol contamination. In vitro growth rate and spore production were also measured. Two whole-genome scans for selection were conducted with 333,297 SNPs. One scan looked for signatures of selection in the entire sample and the other scan was for divergent selection between the isolates from moderately resistant wheat and highly susceptible wheat. The population of isolates from highly susceptible wheat was primarily aggressive. Several regions of the F. graminearum genome with signatures for selection were identified. The moderately resistant wheat varieties used in this study did not select more aggressive isolates, suggesting that quantitative resistance is a durable method to control FHB.

Broad-Spectrum Resistance and Monogenic Inheritance of Bacterial Blight Resistance in an Indigenous Upland Rice Germplasm ULR207

Bacterial blight (BB) caused by Xanthomonas oryzae pv. Oryzae (Xoo) is a serious disease of rice worldwide that can reduce crop yield and affect food insecurity. A rice resistance variety is an alternate way to solve this problem. The broad-spectrum resistance (BSR) of ULR207 is important for durable resistance to several of the Xoo isolates. However, the inheritance of this resistance gene in ULR207 must be known before it can be utilized. Thus, this study aimed to survey the BB resistance gene with reference to the BB resistance gene for identification of non-analogous or analogous genes and confirmation of a broad-spectrum resistance, to investigate the gene effect, the number of genes, and the heritability of the BB resistance gene in the ULR207 variety. Six populations of two crosses (Maled Phai × ULR207 and RD6 × ULR207), i.e., ULR207 (Donor parent), Maled Phai and RD6 (Recurrent parent), F1, F2, BC1P1, and BC1P2 were constructed. These materials were evaluated for BB resistance by clipping methods under greenhouse conditions using a virulence isolate of a pathogen in Thailand. The results showed that ULR207 exhibited the strongest against BB with 0.8 of BSR with low area under the disease progress curve (AUDPC). Molecular screening for surveying of the BB resistance gene in ULR207 revealed a non-analogous resistance gene with resistance check varieties. The phenotype of the disease lesion length of F2 and BC1P2 populations exhibited a ratio of 1:3 and 1:1 (resistant: susceptible), respectively, revealing a single recessive gene in both crosses. The scaling test parameters A, B, and C were non-significant (p &lt; 0.01), indicating that variation in data was sufficiently explained by additive (d) and dominance (h) components. The gene action of ULR207 was controlled by additive gene action. Heritability of the two crosses, Maled Phai x ULR207 and RD6 x ULR207, exhibited high values with 0.817 and 0.716, whereas the numbers of the genes were 1.4 and 1.2, respectively. The result indicated that the breeding strategy could be employed in early generations when using ULR207 as a new source of bacterial blight resistance.

Analyzing genetic diversity in luffa and developing a Fusarium wilt-susceptible linked SNP marker through a single plant genome-wide association (sp-GWAS) study

BackgroundLuffa (Luffa spp.) is an economically important crop of the Cucurbitaceae family, commonly known as sponge gourd or vegetable gourd. It is an annual cross-pollinated crop primarily found in the subtropical and tropical regions of Asia, Australia, Africa, and the Americas. Luffa serves not only as a vegetable but also exhibits medicinal properties, including anti-inflammatory, antidiabetic, and anticancer effects. Moreover, the fiber derived from luffa finds extensive applications in various fields such as biotechnology and construction. However, luffa Fusarium wilt poses a severe threat to its production, and existing control methods have proven ineffective in terms of cost-effectiveness and environmental considerations. Therefore, there is an urgent need to develop luffa varieties resistant to Fusarium wilt. Single-plant GWAS (sp-GWAS) has been demonstrated as a promising tool for the rapid and efficient identification of quantitative trait loci (QTLs) associated with target traits, as well as closely linked molecular markers.ResultsIn this study, a collection of 97 individuals from 73 luffa accessions including two major luffa species underwent single-plant GWAS to investigate luffa Fusarium wilt resistance. Utilizing the double digest restriction site associated DNA (ddRAD) method, a total of 8,919 high-quality single nucleotide polymorphisms (SNPs) were identified. The analysis revealed the potential for Fusarium wilt resistance in accessions from both luffa species. There are 6 QTLs identified from 3 traits, including the area under the disease progress curve (AUDPC), a putative disease-resistant QTL, was identified on the second chromosome of luffa. Within the region of linkage disequilibrium, a candidate gene homologous to LOC111009722, which encodes peroxidase 40 and is associated with disease resistance in Cucumis melo, was identified. Furthermore, to validate the applicability of the marker associated with resistance from sp-GWAS, an additional set of 21 individual luffa plants were tested, exhibiting 93.75% accuracy in detecting susceptible of luffa species L. aegyptiaca Mill.ConclusionIn summary, these findings give a hint of genome position that may contribute to luffa wild resistance to Fusarium and can be utilized in the future luffa wilt resistant breeding programs aimed at developing wilt-resistant varieties by using the susceptible-linked SNP marker.

Evaluation of a Formulation of Bacillus subtilis for Control of Phytophthora Blight of Bell Pepper.

Phytophthora blight, caused by Phytophthora capsici, is one of the most economically significant diseases of bell pepper in the United States. Over the past several decades, isolates of P. capsici exhibiting resistance to mefenoxam and other fungicides have been reported. Fungicide resistance coupled with an increased market for organically grown crops has led to interest in biological control as a disease management option. In this work, an isolate of Bacillus subtilis (AFS032321) was evaluated for control of Phytophthora blight of bell pepper in the greenhouse and field. A 28% active ingredient wettable powder formulation of the strain was applied as a soil drench at transplanting prior to inoculation. Treatment with this formulation of B. subtilis significantly reduced the area under the disease progress curve (AUDPC) by up to 52% compared to untreated control plants in greenhouse tests. Comparisons between applying the biocontrol weekly after seeding for 5 weeks versus a single application at transplanting (5 weeks) indicated no significant benefits of additional applications. The formulation of B. subtilis reduced disease caused by a mefenoxam-resistant isolate of P. capsici, while mefenoxam failed. The biocontrol efficacy of formulated strains was not affected in different soil types or potting media. However, disease was more severe in sandy soils. In field experiments that were conducted with a mefenoxam-sensitive isolate, disease incidence and severity of Phytophthora blight were significantly reduced at all rates of B. subtilis in 2019 except the 16.8 kg ha-1 rate. In both years, mefenoxam was more effective than B. subtilis in controlling disease in the field. B. subtilis did not affect the spatial dynamics of pathogen spread within rows. While the precise mechanism(s) of action is unclear, in vitro dual-culture tests suggest direct antagonism, as B. subtilis significantly inhibited colony growth of P. capsici. AgBiome has recently released a new formulation of the AFS032321 strain named Theia, with higher active ingredients for commercial applications and biocontrol of P. capsici.

Grain Yield and Quality Losses Caused by Tan Spot in Wheat Cultivars in Australia

Tan spot (TS), known in Australia as yellow leaf spot, is caused by the fungal pathogen Pyrenophora tritici-repentis, a major foliar disease of wheat. Four experiments were conducted between 2016 and 2017 in two different climatic zones of southeastern Australia to determine the impact of TS on grain yield and quality in six wheat cultivars with different resistance ratings. In each experiment, high and low TS disease scenarios were applied to each cultivar. Disease severity was assessed as either whole-plot percentage leaf area affected (%LAA) or top three leaf (flag to flag-2) %LAA. Whole-plot %LAA was analyzed using both repeated measurements and area under the disease progress curve (AUDPC). For whole-plot %LAA, the repeated measurements identified differences in epidemic progression at key growth stages not identified through AUDPC. Both AUDPC and end-of-season flag to flag-2 %LAA were negatively correlated with grain yield and screenings. Increased rainfall impacting disease development and number of rain days above 5 mm increased TS severity across both climatic zones. Cultivar resistance ratings influenced grain yield loss, with moderately resistant, moderately susceptible, and susceptible cultivars losing up to 6, 18, and 24% grain yield, respectively. High disease significantly increased screenings by up to 1, 3, and 5% for moderately resistant, moderately susceptible, and susceptible cultivars, respectively. This study demonstrated that TS can cause significant grain yield losses in southeastern Australia, and a minimum cultivar rating of moderate resistance to moderate susceptibility was required to prevent severe TS and associated grain yield and quality losses. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license .

Plant Growth, Fruit Yield, and Tomato Leaf Curl Disease of High Tunnel Organic Tomato Affected by Shade Net and Plastic Mulch Color

There is an increasing interest in producing organic tomatoes (Solanum lycopersicum) in high tunnels (HTs) in the southeast United States. HTs are unheated, passively cooled structures that allow tomato growers to harvest high-quality fruit out of season. However, excessive temperatures inside HTs may negatively impact tomato plant growth and fruit yield. Shade nets have been reported to reduce temperatures inside the HTs. Plastic mulch color has also significantly influenced plant growth and yield under high-temperature conditions. This study aimed to determine the effects of shade net color and plastic mulch color on plant growth, fruit yield, and incidence of tomato yellow leaf curl disease (TYLC) in ‘Red Snapper’ tomato grown in HTs under elevated temperatures (summer-fall) in southern Georgia, USA. Organic ‘Red Snapper’ tomato seedlings were transplanted in HTs in 2019 (Season 1) and 2020 (Season 2). The design was a split-plot randomized block where the main plots were externally mounted shade nets (black, silver, and unshaded; 30% shade factor), and the subplots were plastic mulches (black and white). Compared with black mulch, white mulch improved plant height and stem diameter but did not influence fruit yields. Shade nets reduced HT air temperature and root zone temperature (RZT) but did not affect plant height and stem diameter. The diminished photosynthetic photon flux density (PPFD) under the shade nets reduced marketable fruit yield. Thus, shade nets are not recommended once heat challenges do not limit HT tomato production in Georgia (after about mid-October). Shade nets and plastic mulch inconsistently affected TYLC incidence, severity, and area under the disease progress curve (AUDPC). Additional fruit yield reductions occurred due to TYLC because the incidence was 100% 6 weeks after transplanting. Preliminary insect data showed that shade net treatments had similar sweetpotato whitefly (Bemisia tabaci) numbers. The high TYLC incidence indicates that ‘Red Snapper’ may not be suitable for fall HT tomato production in the southeast United States. More research on shading and heat stress management in HT organic tomato production is necessary.

Biocontrol of Diplodia bulgarica, the causal agent of apple canker, using Trichoderma zelobreve.

Apple (Malus domestica Borkh) is one of the most consumed and nutritious fruits. Iran is one of the main producers of the apple in the world. Diplodia bulgarica is the major causal agent of apple tree decline in Iran. Biological control is a nature-friendly approach to plant disease management. Trichoderma zelobreve was isolated from apple trees infected with Diplodia bulgarica in West Azarbaijan province of Iran. The results showed that T. zelobreve strongly inhibited the colony growth of D. bulgarica. In vivo assay on detached branches of apple tree cv. Golden Delicious using T. zelobreve mycelial plug showed that canker length/stem length (CL/SL) and canker perimeter/stem perimeter (CP/SP) indices decreased by 76 and 69%, respectively, 21days after inoculation. Additionally, wettable powder formulation (WPF) containing the antagonistic fungus "T. zelobreve" decreased CL and CP/SP by 75 and 67%, respectively, 6months after inoculation. Moreover, canker progress curves and the area under the disease progress curve (AUDPC) supported these findings. The growth temperatures of the antagonist and pathogen were similar, indicating the adaptation of T. zelobreve for biocontrol of apple canker caused by D. bulgarica. The results also showed that T. zelobreve-based WPF stored at 25°C assure excellent shelf life at least 4months, allowing the bioproduct to be stored at room temperature, which is a great advantage and cost-effective option.

In‐field climatic factors driving Sclerotinia head rot progression across different sunflower planting dates

AbstractSclerotinia head rot, caused by Sclerotinia sclerotiorum, is a major disease limiting sunflower production in tropical and subtropical agroecological zones. Sporadic outbreaks across South Africa have resulted in major losses, yet little is known about the in‐field climatic factors driving this infection. Short‐interval, staggered plantings have been proposed as a control method for Sclerotinia head rot, which help to limit the number of plants in a susceptible developmental stage during conducive environmental conditions. However, this complicates field management practices, especially if working at the fringes of a planting window due to delayed rains. This study aimed to investigate the effect of planting date on Sclerotinia head rot progression in monthly plantings across the summer period. Artificial mycelial plug inoculations were performed at the R5.9 flowering stage in an open field. Disease establishment, progression and severity were monitored at 3‐day intervals for 30 days. We show that disease establishment was delayed by low relative humidity or extreme low temperatures in the January and March planting dates where the first lesions were only observed 6 days post‐inoculation. Consistently high temperatures above 27°C also suppressed disease progression and produced low area under the disease progress curve (AUDPC) scores of 75.15 and 29.4 for the October and November planting dates, respectively. These findings suggest that regardless of season or location, selecting a planting date that ensures the sunflower bloom period aligns with the hottest, driest part of the season will probably suppress Sclerotinia head rot in regions with average summer highs above 27°C.

Chemical Control of Powdery Mildew of Bigleaf Hydrangea

The efficacy of the fungicide pydiflumetofen + difenoconazole (Postiva) was evaluated at varying application rates and intervals for the control of powdery mildew (Golovinomyces orontii, formerly Erysiphe polygoni) in bigleaf hydrangea (Hydrangea macrophylla ‘Nikko Blue’). Container-grown hydrangeas were arranged in a completely randomized design with six single-plant replications. Experiments were done in 2022 and 2023 under both greenhouse and shade house conditions (56% shade). Powdery mildew in hydrangea was developed naturally. Pydiflumetofen + difenoconazole at 1.1, 1.6, and 2.2 ml·L−1 and a standard fungicide azoxystrobin + benzovindiflupyr (Mural) at 0.5 g·L−1 were sprayed to runoff on 2-, 4-, and 6-week intervals. Plants that were not treated with fungicide served as the control. Plants were evaluated weekly for disease severity (0% to 100% foliage affected) and defoliation (0% to 100% defoliation). The season-long area under the disease progress curve (AUDPC) and defoliation progress curve (AUDFC) were calculated for the evaluation period. The initial and final plant height and width were recorded, and height and width increase were determined. Pydiflumetofen + difenoconazole and azoxystrobin + benzovindiflupyr significantly reduced final disease severity, AUDPC, and defoliation both in the greenhouse and shade house compared with control plants. In both greenhouse trials and the 2022 shade house trial, AUDFC was reduced in all treatments compared with the control plants. However, AUDFC was not reduced by all treatments in the 2023 shade house trial. Pooled over application intervals, the low rate of pydiflumetofen + difenoconazole was as effective as the medium and high rates of pydiflumetofen + difenoconazole and azoxystrobin + benzovindiflupyr in reducing final powdery mildew severity and AUDPC both in the greenhouse and shade house in both 2022 and 2023. No significant differences between application intervals were noted in final disease severity and progress. Control of powdery mildew with fungicides failed to increase plant dimensions (i.e., plant height and width) compared with the no fungicide control. Because all application rates and intervals of pydiflumetofen + difenoconazole provided comparable powdery mildew disease control, it is suggested that using a low rate of pydiflumetofen + difenoconazole with the longest application interval (6 weeks) is the most cost-effective approach for managing powdery mildew in bigleaf hydrangeas.

Grafting as an effective approach for improvement of eggplant resistance against bacterial wilt (Ralstonia solanacearum) in screen-house condition

ABSTRACT Forty-two accessions of eggplant were screened against Ralstonia solanacearum in screen-house environments. This was followed by an assessment of the genetic diversity of the 42 eggplant successions originating from Bangladesh, China, Thailand and Malaysia, accomplished by exploring SSR markers for germplasm characterisation. Five selected resistant genotypes used as a rootstock were further assessed with UPMSE16 strain in a subsequent trial. The pathogenicity test based on area under the disease progress curve (AUDPC) and disease severity index (DSI) at four weeks after inoculation indicated that genotypes TB3, TB6, TB7, MB16 and BB9 had the greatest degree of resistance. Also, the results of the second trial for grafted and control plants based on DSI and AUDPC at 4 WAI showed that grafted plants had resistance to UPMSE16 strain with no symptoms at 4 WAI. The 42 accessions were grouped into nine major clusters based on SSR markers using Unweighted Pair Group Method with Arithmetic mean. Hence, the phenotyping screening reveals that five eggplant accessions were resistant to R. solanacearum and can be used as potential rootstock. As a result, the discovered SSR markers may be effective in marker-assisted selection for future use in developing new rootstock.

Triagem de genótipos brasileiros de cana-de-açúcar à reação ao carvão

ABSTRACT: The main method of sugarcane smut (Sporisoriumscitamineum)control is the genetic resistance. This study assessed the reaction of Brazilian sugarcane genotypes to the smut. The design used was randomized blocks, with 41 genotypes and four replications. The experimental unit consisted of five seedlings per genotype. The genotypes were inoculated by immersing the buds in a smut spores’ suspension. For each genotype, it was obtained the disease incidence in percentage of stalk with whip and with the disease incidence data over time the area under the disease progress curve (AUDPC) were calculated for each genotype. Based in the AUDPC, three genotypes were classified as highly resistant (7.3%), eighteen as resistant (43.9%), twelve as moderately resistant (29.3%), three as moderately susceptible (7.3%) and five as susceptible (12.2%). Genotypes with higher levels of resistance to smut sugarcane can be used for integrated disease management and can be used as parents in new crosses in order to obtain progenies with higher proportion of genotypes resistant to smut.

Results Regarding the Re-Emergence of Early Blight (Alternaria spp.) and Risk Management in Potato Growing Areas

Early blight caused by Alternaria spp. is a problem in many potato and tomato growing areas. Since some years, more and more countries report an increasing occurrence of early blight in the fields. Attacks of early blight was not see in potato fields from Barsa country, Romania, in the last years. But 2019 was an year with reemergence of early blight attack to different potato varieties. Application of fungicides is commonly used to effectively control the disease, although they are undesirable due to environmental consequences. Use of resistant cultivars would be the most optimal solution, but there are no cultivars with high level of resistance available on the market. Potato trials were carried out between 2019-2020 to the NIRDPSB Brasov on chernozeum soil with a randomised complete block design and four replicates with five Romanian varieties: Brasovia, Cezarina, Asinaria, Sevastia and Castrum. At the time of the disease, observations were made regarding the level of the attack. The determinations were performed on the lower, middle and upper level of the foliage of the tested plants (10 plants x 2 rows x 4 repetitions). Area under the disease progress curve (AUDPC) was calculated based on visual assessment of foliar disease during the growing season each year. AUDPC ranged from 3143 to 170.5 in 2019 and from 1681.6 to 54 in 2020, respectively. The obtained productions varied between 27.17 t/ha (Castrum variety) and 43.03 t/ha (Cezarina variety) in 2019 and between 37.06 t/ha (Castrum variety) and 61.12 t/ha (Sevastia variety) in 2020.

Trichoderma erinaceum AND Trichoderma virens IN THE CONTROL OF Meloidogyne incognita IN Solanum lycopersicum

In this study, the antagonistic potential of Trichoderma erinaceum 10-15 and T. virens 32-09 against the nematode Meloidogyne incognita was evaluated in tomato (Solanum lycopersicum L.) plants. A solution of 106 conidia mL-1 of each strain was inoculated on tomato plants, and the variables of nematode control, galling index, eggs per gram of root, and females per gram of root were determined. The in vitro antagonism of Trichoderma filtrates on the hatching of eggs and J2 juveniles of M. incognita was evaluated. The results were used for analysis of variance and comparison of means using the Tukey method (p ≤ 0.05). Control variables of the phytopathogen on S. lycopersicum were determined by measuring the area under the disease progress curve (AUDPC), the Weibull parameter, the coefficient of determination, and the final severity of root damage. T. erinaceum 10-15 showed a greater inhibitory effect on M. incognita, relative to T. virens 32-09. Both strains evaluated showed significant differences in comparison to the uninoculated control, resulting in a 60 % reduction in juvenile stage mobility and egg hatching, as well as greater control of the phytonematode in the AUDPC variables, Weibull parameter, and final severity under controlled conditions. The strain T. erinaceum 10-15 showed a better antagonistic effect on egg formation at 68 days, at 60.3 %, and on reducing the number of M. incognita females with at 60 days, at 80.6 %. Both T. erinaceum 10-15 and T. virens 32-09 were found to be potential biocontrol agents of M. incognita in S. lycopersicum.

Evaluation of Camellia Cultivars and Selections for Growth, Cold-hardiness, Flowering, and Disease Resistance in Tennessee, USA

Susceptibility to low-temperature injury and diseases is a major concern associated with ornamental camellia production. To comprehensively understand their growth, cold-hardiness, flowering, and disease resistance, 24 camellia (Camellia spp. and hybrids) cultivars and selections were evaluated in McMinnville, TN, USA (USDA plant hardiness zone 7a). During Mar 2011, camellias were planted in the field plots. Plant height and canopy width were measured annually from 2011 to 2019, and low-temperature damage was recorded in 2014 and 2023. The flowering duration was recorded each year from 2011 to 2020. The Camellia Yellow Mottle Virus, monochaetia leaf spot (Monochaetia sp.), edema, flower blight (Ciborinia camelliae), and flower spot (Botrytis cinerea) severity (% affected) were evaluated from Oct to Nov in 2016 and 2017. The season-long area under the disease progress curve (AUDPC) was calculated. Cultivars Arctic Snow and Pink Icicle exhibited the greatest height, and Autumn Spirit, Elaine Lee, Arctic Snow, and Survivor had the widest canopy width, whereas Shishigashira had the lowest height and canopy width. ‘April Remembered’, ‘April Rose’, ‘Arctic Snow’, ‘Ashton’s Ballet’, ‘Autumn Carnival’, ‘Autumn Spirit’, ‘Elaine Lee’, ‘Survivor’, and C. chekiangoleosa selection were least affected by winter low temperatures, whereas ‘Korean Snow’, ‘One Alone’, C. sasanqua selection, ‘Pink Icicle’, and ‘Shishigashira’ were severely damaged. ‘Arctic Snow’ flowered most reliably (6 of 8 years), whereas ‘April Remembered’, ‘April Rose’, ‘Ashton’s Ballet’, ‘Autumn Spirit’, and ‘Survivor’ flowered five times. ‘Korean Fire’, ‘Classic Pink’, ‘Maroon Mist’, and ‘Spring’s Promise’ displayed the highest virus severity and AUDPC. ‘Arctic Snow’, C. sasanqua selection, and the C. chekiangoleosa selection had no viral symptoms. C. sasanqua selection and ‘Red Aurora’ were significantly impacted by edema disorder, with severity ratings of ∼43% and 26%, respectively. Monochaetia leaf spot severity was highest in ‘Red Aurora’ and ‘Spring’s Promise’, whereas ‘Anacostia’, ‘Arctic Snow’, ‘Ashton’s Ballet’, ‘Autumn Spirit’, ‘Classic Pink’, ‘Kuro Delight’, ‘One Alone’, ‘Pink Icicle’, ‘Shishigashira’, and ‘Survivor’ exhibited the least monochaetia leaf spot severity and AUDPC. Flower blight and flower spot were observed only in ‘Arctic Snow’ and ‘Survivor’. These findings will aid landscapers and nursery growers with selecting and managing camellia cultivars effectively.

Infection Risk-Based Application of Plant Resistance Inducers for the Control of Downy and Powdery Mildews in Vineyards

Plant resistance inducers (PRIs) are potential alternatives for controlling grapevine downy (DM) and powdery (PM) mildews in vineyards. In a 3-year field study, we evaluated the field efficacy of six commercial PRIs of chemical and natural origin against DM and PM diseases when applied at designated vine growth stages in a mixture with low doses of copper and sulfur, and only when advised by weather-driven disease models. The disease severity and incidence were evaluated for each season at key growth stages (i.e., the end of flowering, berries pea-sized, veraison, and pre-harvest), and areas under the disease progress curves (AUDPC) were calculated and compared with those of nontreated vines. These risk-based applications resulted in a 41% and 61% reduction of interventions against DM and PM, respectively, compared to the official advice for integrated pest management in the growing area. These applications provided a disease control efficacy of 88% for DM and 93% for PM; the disease severity on bunches never exceeded 5%. Overall, when the disease severity was expressed as AUDPC, we observed higher efficacy of all the PRIs for PM, and of laminarin and cerevisane for DM. We also found that potassium phosphonate and fosetyl-Al (commonly used against DM) were effective against PM, and cos-oga (used against PM) was effective against DM. These results broaden the application and integration of PRIs in viticulture.